So for whatever reason, I can't flash twrp. I have done it many times in the past but its not working now. i tried like 3 different versions and no success.i downloaded the file off twrp site and flashed with odin but still have the stock recovery? can someone please help
HeliosV said:
So for whatever reason, I can't flash twrp. I have done it many times in the past but its not working now. i tried like 3 different versions and no success.i downloaded the file off twrp site and flashed with odin but still have the stock recovery? can someone please help
Click to expand...
Click to collapse
Greetings,
For us to be able to assist you, you must provide your device model.
Thanks.
The Merovingian said:
Greetings,
For us to be able to assist you, you must provide your device model.
Thanks.
Click to expand...
Click to collapse
Well i already fixed it, by factory resetting with Kies 3. thank you though
Thread closed.
User resolved.
Related
Please, need help.
My mate only starts on fastboot mode. Can flash stock and cwm recoveries, but dont works. No dload. Nothing. Please somebody who knows what to do.
Thanks a lot.
I'm having the same issue on my MT7-L10. I flashed the stock firmware (extracted from the URL consumer.huawei.com/en/support/downloads/detail/index.htm?id=32364 using update.app extractor) using CWM and the phone never boot up again. It only shows the Ascend logo and stops there. I've never had any problem using CWM to flash firmwares on it before. So I am assuming the extracted firmware is the cause.
I can access the bootloader and flash recovery (both custom and stock) or boot img, but the phone would not boot up. Since I can't get to the recovery, there wasn't much else I could do; let alone, flash the backup. It had been 2 weeks since that happened and I tried many methods but found no solution online. Might as well give up on it unless there's a real solution for us.
please solution
semo9 said:
please solution
Click to expand...
Click to collapse
Flash original recovery put desired firmware in dload sd card and do 3BTN
semo9 said:
please solution
Click to expand...
Click to collapse
If you installed CWM it is logical that you can' t install stock ROM, neither 3buttons can start...
This has been already discussed and repeated so many times before.
Please, be so kind to use the "search" button next time and give a look in the proper section of this FORUM.
You would have fount the "solution" in a while, instead of asking.
Please consider this next time. Thank you !!!
tuddu said:
If you installed CWM it is logical that you can' t install stock ROM, neither 3buttons can start...
This has been already discussed and repeated so many times before.
Please, be so kind to use the "search" button next time and give a look in the proper section of this FORUM.
You would have fount the "solution" in a while, instead of asking.
Please consider this next time. Thank you !!!
Click to expand...
Click to collapse
I tried all what you say. Of course, i reflashed the stock recovery first, but I can't acces to recoverys stock with dload.
And of course, i read and tried all threads before asking.
Thanks.
mek32 said:
I tried all what you say. Of course, i reflashed the stock recovery first, but I can't acces to recoverys stock with dload.
And of course, i read and tried all threads before asking.
Thanks.
Click to expand...
Click to collapse
u don't need to access stock recovery .. it isn't like custom where u can move around .. in orig recovery is only wipe factory and reboot that's all...
just do what i told that other guy .. let us know..
unbrick
nekokari said:
I'm having the same issue on my MT7-L10. I flashed the stock firmware (extracted from the URL consumer.huawei.com/en/support/downloads/detail/index.htm?id=32364 using update.app extractor) using CWM and the phone never boot up again. It only shows the Ascend logo and stops there. I've never had any problem using CWM to flash firmwares on it before. So I am assuming the extracted firmware is the cause.
I can access the bootloader and flash recovery (both custom and stock) or boot img, but the phone would not boot up. Since I can't get to the recovery, there wasn't much else I could do; let alone, flash the backup. It had been 2 weeks since that happened and I tried many methods but found no solution online. Might as well give up on it unless there's a real solution for us.
Click to expand...
Click to collapse
did you find any solution to this problem.........
mpt123 said:
did you find any solution to this problem.........
Click to expand...
Click to collapse
I took it to the Huawei service center. A week later, they called and said that it was a defect on motherboard and replaced it for me. No solution on my end.
nekokari said:
I took it to the Huawei service center. A week later, they called and said that it was a defect on motherboard and replaced it for me. No solution on my end.
Click to expand...
Click to collapse
Thanks for letting me know....im facing the same problem.
Hey there...
i tried to install another ROM and made some kind of big mistake
I deleted the whole system what was quiete dumb i think...
Anyone of you may help me what to do now ?
(I had stock kernel, then rooted is via CFroot and then installed TWRP and delete the wrong thinks without having made a backup)
Hope I'll find some help here
Cheers TipperTip
TipperTip said:
Hey there...
i tried to install another ROM and made some kind of big mistake
I deleted the whole system what was quiete dumb i think...
Anyone of you may help me what to do now ?
(I had stock kernel, then rooted is via CFroot and then installed TWRP and delete the wrong thinks without having made a backup)
Hope I'll find some help here
Cheers TipperTip
Click to expand...
Click to collapse
Flash your countries latest firmware for your model on sammobile.com with odin
GtrCraft said:
Flash your countries latest firmware for your model on sammobile.com with odin
Click to expand...
Click to collapse
Get stuck on "NAND write start" ((
TipperTip said:
Get stuck on "NAND write start" ((
Click to expand...
Click to collapse
Then you dint download the latest Odin 3.10X like sammobile.com says to., right under where you click the download button.
-Mr. X- said:
Then you dint download the latest Odin 3.10X like sammobile.com says to., right under where you click the download button.
Click to expand...
Click to collapse
I did
If it says no OS installed than you need to push (sideload) a ROM with usb cable.Its easy google it
TipperTip said:
I did
Click to expand...
Click to collapse
Shouldn't be getting stuck there on 3.10.6 Odin. Have you got the drivers installed? I assume you have. Side loading might work, however it doesn't seem to function properly in our recoveries yet. At least not for me.
-Mr. X- said:
Shouldn't be getting stuck there on 3.10.6 Odin. Have you got the drivers installed? I assume you have. Side loading might work, however it doesn't seem to function properly in our recoveries yet. At least not for me.
Click to expand...
Click to collapse
Well downloading the newest Odin version helped me...
Sideload didn't work for me either - tried it before
But thanks, downloading newest Odin again helped
Hi,
I rooted my LG G2 ATT using Stump root, then tried to install TWRP recovery using TWRP Manager, which corrupted stock recovery. as I didn't have unlocked bootloader, I installed AutoRec.apk and successfully installed TWRP recovery to make backup of System.
Now I need to revert to Stock recovery. But Unfortunately I don't have its backup.
Can someone please upload Stock recovery of D80020y?
Thanks
mudi12 said:
Hi,
I rooted my LG G2 ATT using Stump root, then tried to install TWRP recovery using TWRP Manager, which corrupted stock recovery. as I didn't have unlocked bootloader, I installed AutoRec.apk and successfully installed TWRP recovery to make backup of System.
Now I need to revert to Stock recovery. But Unfortunately I don't have its backup.
Can someone please upload Stock recovery of D80020y?
Thanks
Click to expand...
Click to collapse
For the past few days I've been seeking for help, But non got really interested. Anyways, your wish granted.
I've backed it up using flashify. Kindly check your PM.
dr.patron99 said:
For the past few days I've been seeking for help, But non got really interested. Anyways, your wish granted.
I've backed it up using flashify. Kindly check your PM.
Click to expand...
Click to collapse
I'm having the exact same problem, could you please send me the stock recovery? Thanks.
crawkid610 said:
I'm having the exact same problem, could you please send me the stock recovery? Thanks.
Click to expand...
Click to collapse
I can send you the same, but problem you would encounter will be, It won't let you flash. As Stock kernel isn't Bumped n best goes with Dorimanx.
So if you still need one, do let m know, I'll hook u up with.
dr.patron99 said:
I can send you the same, but problem you would encounter will be, It won't let you flash. As Stock kernel isn't Bumped n best goes with Dorimanx.
So if you still need one, do let m know, I'll hook u up with.
Click to expand...
Click to collapse
Yeah man, it would be great if you could hook me up with it, I'm up for the risk, thank you a lot!
Sir, please do help me. My custom rom was CM lollipop, i updated it to its latest version but it didnt turn out well, it only stayed on its nvidia logo. So i tried to go to twrp recovery Version 2.8.7, so i thouht that the latest version of CM did not work because of my outdated twrp. so i did flash the 3.02 version of twrp, but sadly it didnt work, the same it only stays on nvidia logo
I tried installing the twrp .img using the ADB, but the fact that i cant open developers settings dew to wiped rom. So can please if there is someone who can help me. !
Flash it using fastboot while in the bootloader, not adb.
Keithn said:
Flash it using fastboot while in the bootloader, not adb.
Click to expand...
Click to collapse
Sir, can you elaborate on how to do it please!
Thank you!
Jintoki said:
Sir, can you elaborate on how to do it please!
Thank you!
Click to expand...
Click to collapse
Download the appropriate firmware and flash. There is instructions on the website I believe.
https://developer.nvidia.com/gameworksdownload#?search=shield tablet
Jintoki said:
Sir, can you elaborate on how to do it please!
Thank you!
Click to expand...
Click to collapse
There is also a thread in general that has links and information for OTA and recovery images. Take a look there it should have everything you need and instructions.
Hello,
I know my question is weird but I got an issue with TWRP that doesn't allow me to make backups anymore. So I'd like to know how to reset TWRP state to see if it backs to normal after that. Can you help me please?
Atronid said:
Hello,
I know my question is weird but I got an issue with TWRP that doesn't allow me to make backups anymore. So I'd like to know how to reset TWRP state to see if it backs to normal after that. Can you help me please?
Click to expand...
Click to collapse
Reflash TWRP or flash a different version to see if it has the same issue.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Reflash TWRP or flash a different version to see if it has the same issue.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Thank you for your reply! Unfortunately, I only got one version of TWRP compatible with my device...
Atronid said:
Thank you for your reply! Unfortunately, I only got one version of TWRP compatible with my device...
Click to expand...
Click to collapse
What version do you have?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
3.0.2-0 for sm-g361f
Atronid said:
3.0.2-0 for sm-g361f
Click to expand...
Click to collapse
I did a Google search for TWRP for SM-G361F.
I saw more than one version of TWRP for SM-G361F.
So, as I said the first time, try a different version of TWRP such as 3.0.1-0 for SM-G361F or 3.0.0-0 for SM-G361F. Some version other than the one you have, maybe the particular TWRP build/file you have is faulty.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
I did a Google search for TWRP for SM-G361F.
I saw more than one version of TWRP for SM-G361F.
So, as I said the first time, try a different version of TWRP such as 3.0.1-0 for SM-G361F or 3.0.0-0 for SM-G361F. Some version other than the one you have, maybe the particular TWRP build/file you have is faulty.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Flashing another version does NOT delete Recovery "memory"! For viability reasons I came back to 3.0.2 after flashing (and using of course) 2.8.7 and it still "thinking" that my SD is partitionned! It doesnt want to write it anymore under this version!!