Related
hi
just bought the gt-n8000 note 10.1
rom N8000JKALI4
how can i enable phone on it?
any update?
thanks
alex
Go to app drawer, look for a little green handset. Click on it. This will bring up dialler.
If you can't find this icon you have either the wifi only model (8010/13) or the internet only model (8005 - Turkey only as far as I know).
Might be stupid question but are you sure you bought the note 10.1, the tab 2 10.1 looks the same but doesn't have the stylus. It also has a secret dialer app so you can make and receive phonecalls but you need to look in the tab2 10.1 section for instructions in that case....
ultramag69 said:
Go to app drawer, look for a little green handset. Click on it. This will bring up dialler.
If you can't find this icon you have either the wifi only model (8010/13) or the internet only model (8005 - Turkey only as far as I know).
Might be stupid question but are you sure you bought the note 10.1, the tab 2 10.1 looks the same but doesn't have the stylus. It also has a secret dialer app so you can make and receive phonecalls but you need to look in the tab2 10.1 section for instructions in that case....
Click to expand...
Click to collapse
i have the samsung gt-n8000
the sim card is inside i can send and recive sms
but cant recive calls
tried to download phone app recive error about phone not enabled
talked with the supplier they said that in therir version only txt and 3g is spported
need to hack it somehow
:\
help me
thanks again
volski said:
i have the samsung gt-n8000
the sim card is inside i can send and recive sms
but cant recive calls
tried to download phone app recive error about phone not enabled
talked with the supplier they said that in therir version only txt and 3g is spported
need to hack it somehow
:\
help me
thanks again
Click to expand...
Click to collapse
If you have 3g access, you could use VOIP for voice. Groove IP has their software working with JB 4.1.2 (big kudos for them looking at an upgrade glitch caused by Samsung programming for JB 4.1.2) Csipsimple also works without flaw on JB 4.1.2 and you can use the SIP provider of your choice. Depending on your location, 3G VOIP may be more expensive than regular cellular voice.
mke1973 said:
If you have 3g access, you could use VOIP for voice. Groove IP has their software working with JB 4.1.2 (big kudos for them looking at an upgrade glitch caused by Samsung programming for JB 4.1.2) Csipsimple also works without flaw on JB 4.1.2 and you can use the SIP provider of your choice. Depending on your location, 3G VOIP may be more expensive than regular cellular voice.
Click to expand...
Click to collapse
I want to use my regular celluar company
their have to be a way to use it
i dont understnad why they blocked it :\
I have 2 samsung galaxy note 10.1's, bought 1 for a friend and my brother too. Every one of these has the phone app pre-installed.
If it's carrier branded there is a chance that they may have removed it. If it's locked to a network carrier or sim locked I'd try to unlock (so as not to brick) first then flash another countries rom. This would put the dialer and everything needed there. However if its tagged by the network not to allow calls this may not help as they use IMEI numbers to block calls, not roms.
It does sound like the N8005 model. If it is the N8005 model from Turkey then you can flash the N8000 rom to restore dialer and phone functions. You would need to do a search as there's a couple of threads on the N8005...
ultramag69 said:
I have 2 samsung galaxy note 10.1's, bought 1 for a friend and my brother too. Every one of these has the phone app pre-installed.
If it's carrier branded there is a chance that they may have removed it. If it's locked to a network carrier or sim locked I'd try to unlock (so as not to brick) first then flash another countries rom. This would put the dialer and everything needed there. However if its tagged by the network not to allow calls this may not help as they use IMEI numbers to block calls, not roms.
It does sound like the N8005 model. If it is the N8005 model from Turkey then you can flash the N8000 rom to restore dialer and phone functions. You would need to do a search as there's a couple of threads on the N8005...
Click to expand...
Click to collapse
what version i can put on my device?
volski said:
I want to use my regular celluar company
their have to be a way to use it
i dont understnad why they blocked it :\
Click to expand...
Click to collapse
One check your modem/ baseband .
Two check with the network to see if its been blocked and why .
jje
JJEgan said:
One check your modem/ baseband .
Two check with the network to see if its been blocked and why .
jje
Click to expand...
Click to collapse
finally installed http://forum.xda-developers.com/showthread.php?t=2119547
works great and phone works also
I have the H962 (from Taiwan) and it has good band support for Telstra and Optus in Australia. This model
- Running 5.1.1 Build LMY47V
- Carrier Bloat-ware free
- Only had two items in Chinese post setup (one folder I just renamed and the keyboard and a ENG/Chineese char swap button I removed)
- FM Radio Std
- Bands Supported are: https://www.frequencycheck.com/models/A3pwO/lg-v10-h962
Of potential interest it has the ability to do an "Enable OEM unlock" under the developer options. If any dev needs system pulls etc then please let me know (and the method).
Let me know of any Q!
0netw0 said:
Try to unlock dev mode in section "about phone", and after that dial 277634#*# . This this service menu with a lot of tests.
Click to expand...
Click to collapse
277634#*# does not work (invalid MMI)
Hi jmone, can you confirm if your H962 can support 4G+3G/3G+4G or only 4G+2G/2G+4G?
I'm in Taiwan now and thinking of buying the H962 but there are no working display set to test out if the 2nd sim card can be on 3G network while the 1st is on 4G.
Appreciate your help!
jmone said:
I have the H962 (from Taiwan) and it has good band support for Telstra and Optus in Australia. This model
- Running 5.1.1 Build LMY47V
- Carrier Bloat-ware free
- Only had two items in Chinese post setup (one folder I just renamed and the keyboard and a ENG/Chineese char swap button I removed)
Of potential interest it has the ability to do an "Enable OEM unlock" under the developer options. If any dev needs system pulls etc then please let me know (and the method).
Let me know of any Q!
Click to expand...
Click to collapse
Yeap mine works with 4g, 3g and 2g...
---------- Post added at 11:10 AM ---------- Previous post was at 11:09 AM ----------
jmone said:
277634#*# does not work (invalid MMI)
Click to expand...
Click to collapse
This is our code..
**#546368#*961#
Riona69 said:
Hi jmone, can you confirm if your H962 can support 4G+3G/3G+4G or only 4G+2G/2G+4G?
I'm in Taiwan now and thinking of buying the H962 but there are no working display set to test out if the 2nd sim card can be on 3G network while the 1st is on 4G.
Appreciate your help!
Click to expand...
Click to collapse
So I gave it a quick test with my SIM (optus) and a mates (telstra) and was surprised how well integrated it is. I've attached a screen shot at – https://www.dropbox.com/s/m40dpabwi32yu24/2015-11-25 23.14.09.png?dl=0
- At the top you see an Icon for both SIMs with a Box around the "active" one.
- At the bottom right you see a switch SIM icon that changes what is the "active" one
- You can receive calls etc from both SIMS without switching anything and in the history your Calls and Text are marked as Sim 1 or Sim 2
- When calling or sending a TXT you can toggle what sim to use
- In the settings screen you can select which sim you want to use for Data (eg only one at a time)
- Notification windows pop up on some actions letting me know if I was using the Optus or Telstra sim
- I also got a pop up asking if I wanted to setup a call diversion so if you are on a call on one sim and a call comes in on the other it goes to msg bank but I did not play with this.
If you are a 2 phone user this would greatly simplify life. Let me know if you need me to more thoroughly test anything.
nazrin313 said:
**#546368#*961#
Click to expand...
Click to collapse
Mmm not for me - invalid MMI
...also on the 2 sim operation - I'm not sure how to check what the second sim is using, as the V10 Settings reported:
- Sim 1 = 4G
- Sim 2 = GPRS
I'm only guessing but as we don't use VOLTE, voice calls will be on 3G for Sim 1, so it may be only 2G for Sim 2??? I also tried using "Network Signal Info Pro" to see what it reported but it was only showing details for Sim 1. If you know a better way of testing please let me know and I'll try that.
nazrin313 said:
This is our code..
**#546368#*961#
Click to expand...
Click to collapse
This is our code to access the hidden menu
*#546368#*962#
Hi Jmone, I just received my h962 (Taiwan ver.), and wondering the method to root and install recovery. Would you please help me to confirm? I'm not sure the recovery for h901 will also work for h962. Xposed is so much important to me...
your suggestion will be so much helpful to me. Thank you.
I'm note sure on how to root either. I'm happy if a dev wants to suggest what to try including how to pull our existing system in case it is needed.
Just did a quick test. It seems like I cannot even get into fastboot. Kinda like what the Verizon guys are getting. Can anyone confirm this?
Just got an OTA Software Update:
- V10b-NOV-30-2015
- 71.36MB
- Summary "Phone usability and functionality has been further improved"
Only took a few minutes to install (and a bit longer on first boot to upgrade the apps). At first pass I don't know what has changed as it is still reporting as running 5.1.1 Build LMY47V
I think it is the fingerprint scanner fix for when the V10 is in a case (working much better for me). Also the SW Version nows has "V10b-TWN-XX" , but I don't know what it was before
Dual sim : lte4 both ?
No recovery and root yet ?
I was told sabre dac hifi is now avaiable for all audio apps ,is it ?,like neutron ,poweramp ,and streaming ,like spotify ,deezer ,etc...etc..
Tks giovanni.
Sent from my GT-I9500 using XDA Free mobile app
Is there any model which support LTE band 20? Thx.
Will the H962 work on T-Mobile's LTE network?
I'm guessing Band 2 (1900mhz) and 4(1700mhz/2100mhz)?
Thanks in advance...
The H962 is not good for full T-Mobile band support - https://www.frequencycheck.com/carrier-compatibility/aGzcY/lg-v10-h962/t-mobile-united-states
I bought an H961N from Amazon, now realized it says H962 on about phone, what are the differences
H961N is Hongkong version while H962 is Taiwan one
Any differenece in spec wise? Today i got h962 from ebay. Made in korea
Hey folks,
I am somewhat of a noob but had a question. I have the sprint S8+( model SM -G955U) and my device did not come with the built in video calling app. Anybody know how I can get it for my device as well as any instructions? Thanks in advance for your help
I'm not 100% sure but I think video calling option depends on which carrier you are with and if they offer video calling, and also which CSC your phone is on.
Ex: I have an S8+ that I purchased directly from Samsung, the CSC was XAC and didn't have video calling option, but then changed the CSC to the Carrier that I'm with VMC (Virgin Mobile) and I not have the video calling option, as Virgin Mobile offers VoLTE and video calling. I hope that helps.
Has anyone got this working, the icon is enabled but it's not showing up.
Volte only works iff you buy a volte compatible phone from 3 shop. It has to be one of there phones or its blocked. Unlike on O2 iff the phone is volte compatible it even works with some of there pay as you go phones. For this reason i am going to leave 3 after my contract finishes.
sam00561 said:
Volte only works iff you buy a volte compatible phone from 3 shop. It has to be one of there phones or its blocked. Unlike on O2 iff the phone is volte compatible it even works with some of there pay as you go phones. For this reason i am going to leave 3 after my contract finishes.
Click to expand...
Click to collapse
My last phone was a phone not sold in the UK but that worked?
Which phone was it and where did you buy it I know for a fact that any phone which has volte but not bought through 3 store will have the volte IMS service blocked because you need there version of Android firmware for it to work. I have had many arguments with 3 customer support over this.
the Volte and Wifi Settings are blocked by OP in their official firmware because they need the carrier to allow the settings on their phones. Some Asian imported phone manufacturers sometimes disobey them and allow it but this is not the norm.
Have you noticed that when you put in a sim from a major operator in the uk the internet/mms etc settings are usually auto configured?
three for example, configure their sims to block any 'non authorised' phone to auto download the required settings to enable wifi calling and volte.
This means that the only way of bypassing it (a bit like Sammy csc changing) is if there is a custom ROM available with the three settings pre loaded. EE are the only network that are essentially a 'slut' and allow their settings to (on the most part) be uploaded to any compatible phone.
I get 100 gig a month, unltd calls and text from Three for a ridiculously low £15 per month. I WILL NOT give that up !!!!
as much as i want an OP6 im sticking with a tried and tested Samsung S9 plus that to be frank is just as fast on the most part, and you can easily load three or whatever branded software to enable all the wifi calling and volte goodies.
O2 allow this also. The only real way to get volte working on a non 3 handset is when 3 release there factory stock images eventually and they can be flashed after rooting. Even with custom roms volte will not work for instance lineage etc although volte is implemented still doesnt work. I had bought a lenovo p2 a few years ago and volte did not work for a whole year untill 3 factory images were released and i rooted the phone and installed the 3 firmware then it started working. 3 are real scumbags in this regard.
sam00561 said:
O2 allow this also. The only real way to get volte working on a non 3 handset is when 3 release there factory stock images eventually and they can be flashed after rooting. Even with custom roms volte will not work for instance lineage etc although volte is implemented still doesnt work. I had bought a lenovo p2 a few years ago and volte did not work for a whole year untill 3 factory images were released and i rooted the phone and installed the 3 firmware then it started working. 3 are real scumbags in this regard.
Click to expand...
Click to collapse
all u need to get three volte working is essentially the ims settings, ive seen people being able to get three volte and wifi calling working on various grey imports. But agreed its a very convoluted process.
All one plus's use their own firmware, they dont have carrier versions like samsung and others ...
That is correct the only way oneplus would have volte settings is iff 3 sold oneplus on contract otherwise it is a difficult process. I would be very interested nevertheless iff someone in the future figured out a way to get volte working on a non 3 phone other than using there firmware. By the way i am not a oneplus owner but in fact i have a xiaomi mi6 but i am in the same boat ref volte.
sam00561 said:
That is correct the only way oneplus would have volte settings is iff 3 sold oneplus on contract otherwise it is a difficult process. I would be very interested nevertheless iff someone in the future figured out a way to get volte working on a non 3 phone other than using there firmware. By the way i am not a oneplus owner but in fact i have a xiaomi mi6 but i am in the same boat ref volte.
Click to expand...
Click to collapse
Unfortunately, I was able to flash the H3G firmware onto my Italian source S8 and use both VoLTE and VoWiFi without ever speaking to Three, same applied to the unbranded S9 I got from CPW SIM free!
sam00561 said:
Volte only works iff you buy a volte compatible phone from 3 shop. It has to be one of there phones or its blocked. Unlike on O2 iff the phone is volte compatible it even works with some of there pay as you go phones. For this reason i am going to leave 3 after my contract finishes.
Click to expand...
Click to collapse
I have access to a OP5T and VoLTE and VoWiFi both worked out of the box!
My Pixel 2 - not a chance!
It's easy my dude, there are some bugs with it but hey you can't have both of the best world just yet.
Tutorial : Open Magisk - > Go to Downloads - > Search for VoEnabler - > Reboot - > Activate the VoWiFi and VoLTE in the settings. - > SUCCESS.
Bugs? Only bug I found is that every time someone calls you it will say Unknown (While on VoWiFi, haven't checked on VoLTE yet.)
Let me know how you get on
Three VoLTE working here too using Vo Enabler.
Sorry i am in the weird situation although im not a oneplus 6 owner. I have a xiaomi Mi6 and i used the module voenabler and now i can make calls over wifi but the enhanced Lte option in settings has vanished completely and in the 4636 settings the option for wifi calling became available but the volte option is now greyed out.
I have got VOWIFI working on 3 with pie, I upgraded to 9.0.0 then did this
Dialled *#800#
Went into OnePlus logkit
Went into Function Switch and checked VOWIFI and VOLTE then rebooted
The options now appear in SIM settings and you can turn them on or off.
When I installed 9.0.1 the Function switch options had been removed but as I had already turned them on the SIM options persisted On installing 9.0.2 the Function Switch settings had returned but with a dev test warning.
I have entered airplane mode, turned on WiFi then made and received a call.
The 3 IMS was automatically configured
And some screenshots
I was able to active vowifi but volte is not registering, I did notice that when I connect to WiFi a do a call and during the call I disconnect the WiFi volte start working but only on that call after the call finish it discomect and goes back to no volte. This is on three UK with Pie using the logkit.
@crazdgrunt99 does volte still works for you using the vo enabler?
Got Volte working with 3UK
I got Volte working in my OP6 with 3UK. I used the softwares mentioned here - https://forum.xda-developers.com/oneplus-5t/how-to/guide-volte-vowifi-german-carriers-t3817542
I only installed the softwares mentioned and used *#800# oneplus logkit to enable volte/vowifi options- after that I followed other method used by Jamal , guy who figured out these methods for OP6 (please take EFS backup before this procedure)
Open EFS explorer that is part of qpst software, select your phone , it will start loading directory and files-
Once the directory structure is loaded , go to following path - nv/item_files/modem/mmode
Open the attachment with this post. Delete all files that are same name as in the attachment from Mmode directory in EFS explorer. Note some files are not there. After deletion load the files from attachment to EFS explorer - load as item files - you can select all and load
Reboot phone and it should have Volte working.
Now that A10 is available for the OP6, I can confirm VoLTE working on both OB1 and the production version, at last. (no hacks required)
What about WiFi calling that works too
I'm in the UK and on Three network and have no option for WiFi calling (which i really need as my signal is bad at home). Anyone else have WiFi calling option appear (if so where?). The Mi 10 Pro had it enabled so disappointing this doesn't.
To disable the VoWIFI carrier check, all you have to do is enter *#*#869434#*#* in de phone dialer. The option to place calls over WIFI will then appear in the phone menu. However, some carriers check the type of phone you use or require specific settings in the ROM for it to work. I enabled VoWIFI this way on my device, but it's not working with Vodafone in the Netherlands (at least, not yet).
Appelsap said:
To disable the VoWIFI carrier check, all you have to do is enter *#*#869434#*#* in de phone dialer. The option to place calls over WIFI will then appear in the phone menu. However, some carriers check the type of phone you use or require specific settings in the ROM for it to work. I enabled VoWIFI this way on my device, but it's not working with Vodafone in the Netherlands (at least, not yet).
Click to expand...
Click to collapse
That did the trick, thank you so much !!
orbital247 said:
That did the trick, thank you so much !!
Click to expand...
Click to collapse
Where are you located and what carrier?
gigaflop said:
Where are you located and what carrier?
Click to expand...
Click to collapse
It's in the original post... UK and Three
Works ok on EE using EU ROM, see screenshot
Works ok on Vodafone UK too.
I'm using a Giffgaff and an EE SIM to see which gives better data and the option isn't enabled for Giffgaff (they don't offer it)
So at least in the EU ROM it is up to the carrier with no extra steps the user's end.
I installed EU rom on my Mi 10 ultra and now I no longer have VoWiFi in the settings, and VoLTE is greyed out and can't be clicked! I tried *#*#869434#*#* and got a message that saying VoWIFI is enabled, but it's not working.
Everything was working fine in China rom!!
Update: fixed!
hammody said:
I installed EU rom on my Mi 10 ultra and now I no longer have VoWiFi in the settings, and VoLTE is greyed out and can't be clicked! I tried *#*#869434#*#* and got a message that saying VoWIFI is enabled, but it's not working.
Everything was working fine in China rom!!
Update: fixed!
Click to expand...
Click to collapse
What fixed it?
VoLTE *#*#86583#*#*
VoWIFI *#*#869434#*#*
After dialing these codes make sure the notification says "carrier check disabled" NOT ENABLED.
The trick is you need to restart your phone after enabling them.
hammody said:
VoLTE *#*#86583#*#*
VoWIFI *#*#869434#*#*
After dialing these codes make sure the notification says "carrier check disabled" NOT ENABLED.
The trick is you need to restart your phone after enabling them.
Click to expand...
Click to collapse
Good job. TYVM
it definitely works but call quality was really bad the one time I tried it
Sathelp said:
Works ok on EE using EU ROM, see screenshot
Click to expand...
Click to collapse
I'm UK on EE too... received phone today. Going to start the unlock tonight. Looking online, I note that both the "stable" EU and "weekly" EU appear to have snags - would have thought that the 'stable' would be pretty snag free. Do you recommend the EU ROM, or should I just go ahead with staying on Chinese for a while? I've flashed stuff before on older phones but want to try and keep this one as daily driver where poss, so most 'normal' stuff needs to work pretty much (android auto/vowifi+volte/voice recording/banking/fingerprint).
Would appreciate your input.
If Google pay is important, I mean really important, then stay on stock for now as gpay has an issue, or I should say both stable and weekly seem to have developed a CTS security problem that stops gpay and stops fingerprint banking, normal logins work still though. It should be all good and pass all safetynet tests, so hopefully fixed in next version after Chinese holidays, so around 15 or 16th October as all EU ROMs are based on official ones.
VoLTE and VoWiFI works fine with EU ROM but I am not so sure with the Chinese stock, so one to test.
Call recorder works on all versions really well but you ask about auto, not had any use of it but location history or tracking does not work on their Google framework version but these are fine on the full Google framework set of apps on the EU ROM.
Yes, stable is the most recent so called fully working version with weekly built in top since last stable. Do not switch between each, choose one branch or the other or you may need to wipe your data swapping between the two.
Unlocking does not affect anything but you do need to fully verify your mi account before you start or you will get nowhere. Once done you can start the unlock. The tool will take you to a point where you need to add your mi account and password to the phone to bond the 2 together, then it will start your countdown, 168 hours, one week. Come back after and use the unlock tool again and this time it will unlock, wipe and reboot, so make sure you have a back up or somewhere to get your data back on like your old phone and a copy of mi move. Then you can flash away or stay stock Chinese.
I have attached a copy of my guide to unlock, twrp and ROM flashing, I know you have done some before but it may help you or someone else reading. Oh and one final thing, read as much as you can here and in the Xiaomi.EU forums mi 10 ultra and ROM threads.
Work on Xiaomi Mi 10 Ultra in USA
Sathelp said:
Works ok on EE using EU ROM, see screenshot
Click to expand...
Click to collapse
Sorry to dredge up an old post (I'm EE UK on weekly EU rom).
Can you get SMS to send when on VoWifi, as I'm still getting message send failed (using Pulse SMS)? Calling works, of a sort - quality is poor. Also noticed that sometimes I don't get the VoWifi indicator when out of service area
It sends while on VoWiFI SIM 2 on EE using Mi Message, the stock message app. See screenshot
Hi, I'm having issues with VoWIFI. It never worked on EU Weekly. I see, and enabled the VoWIFI option in the settings, but never works.
VoLTE used to work, but stopped after the last week update (10.12.2020). Since the last weekly update, VoWIFI option disappeared, and VoLTE is greyed out.
I put my SIM in an iPhone and everything was working fine!
I use EU weekly and don't have any issues. My Sky SIM does not but my EE SIM 8n SIM too works a treat. Screenshot attached shows VoWiFI call.
Sometimes the icon dissappears, so I just switch off Wi-fi and back on, service back.