Yesterday I received my new tablet from AliExpress.
However, at the time of purchase, I forgot to ask that the seller already sent it with the Chinese rom (stock rom) and with that it came with the global rom of the device and I did not like it, precisely because it does not support updates via OTA or certifications Netflix L1 to watch videos in higher quality.
With that I looked for a tutorial on how to change the device's rom to stock. hoping it works and solves my problems. I found a video on YouTube and followed the whole step by step and successfully installed ZUI 13.0..... my tablet turned on normally, I made the settings, but when testing it was the same thing and I couldn't get what I wanted. so I came here on the forum looking for a possible solution and I found a post from a guy saying that he had done the procedure to change the rom to stock and with that he had bricked the device but with the help of a post from the group he managed to solve it. I followed his step by step and when I went to block the bootloader thinking it would solve the problem of updates via OTA and the L1 certification my tablet got stuck on the fastboot screen and I couldn't connect anymore.
I even tried to pass the same Room dnv and with that it did the whole procedure and it was successful in qfil. However, when I turned it on, the message appeared that the system was corrupted.
HELP ME PLEASE!!!!!
moreira.edu22 said:
Yesterday I received my new tablet from AliExpress.
However, at the time of purchase, I forgot to ask that the seller already sent it with the Chinese rom (stock rom) and with that it came with the global rom of the device and I did not like it, precisely because it does not support updates via OTA or certifications Netflix L1 to watch videos in higher quality.
With that I looked for a tutorial on how to change the device's rom to stock. hoping it works and solves my problems. I found a video on YouTube and followed the whole step by step and successfully installed ZUI 13.0..... my tablet turned on normally, I made the settings, but when testing it was the same thing and I couldn't get what I wanted. so I came here on the forum looking for a possible solution and I found a post from a guy saying that he had done the procedure to change the rom to stock and with that he had bricked the device but with the help of a post from the group he managed to solve it. I followed his step by step and when I went to block the bootloader thinking it would solve the problem of updates via OTA and the L1 certification my tablet got stuck on the fastboot screen and I couldn't connect anymore.
I even tried to pass the same Room dnv and with that it did the whole procedure and it was successful in qfil. However, when I turned it on, the message appeared that the system was corrupted.
HELP ME PLEASE!!!!!
Click to expand...
Click to collapse
For now, you have to Unlock Bootloader without proper unlock file first. (As lenovo don't provide anymore sn.img)
Then install
https://mirrors.lolinet.com/firmwar...ER_Q00209.3_R_ZUI_13.0.430_ST_220113_qpst.zip
With QPST Tool
Then install directly Full OTA 14.0.127.
At this time you can lock again the device and you will probably got L1 certification.
agora pela manhã vou tentar fazer o procedimento que me passou. se tudo der certo posto o desfecho aqui no grupo. de.toda forma já agradeço a atenção.
consegui pelo tutorial, foi bem difícil mas recuperei. reinstalei a rom e fiz o bloqueio novamente, dessa vez aparece a certificação L1 no Netflix, porém ainda está bem ruim a imagem. alguém tem alguma dica de como resolver o problema dos aplicativos de streaming? rom stock zui14.0.127
moreira.edu22 said:
consegui pelo tutorial, foi bem difícil mas recuperei. reinstalei a rom e fiz o bloqueio novamente, dessa vez aparece a certificação L1 no Netflix, porém ainda está bem ruim a imagem. alguém tem alguma dica de como resolver o problema dos aplicativos de streaming? rom stock zui14.0.127
Click to expand...
Click to collapse
Please use English language or we can't understand what you say....
okay. one moment
I managed by the tutorial, it was very difficult but I recovered. I reinstalled the rom and blocked it again, this time the L1 certification appears on Netflix, but the image is still pretty bad. Does anyone have any tips on how to resolve the streaming apps issue? zui14.0.127 stock rom
It's strange,cause if that tablet can boot,how the image can be bad?....
the image to tablet is Very good. but in apps streaming Its not good. i dont no why.
Related
i just bought this phone from "cosmote" carrier, i managed to root the phone but i was playing with the system files and managed to get bricked. i just cannot pass the Cosmote logo!
i`ve searched the forum for solutions but nothing works!
Please Help!
Thanks in advance!
First of all, don't go in where you have no idea what happens. Try to find the original Rom of the manufacturer if there is any.
Otherwise, the only viable solution is going back to Cosmote and saying "The phone you sold me won't start, give me a new one"
Edit: You might, but I can't guarantee it follow this line of thought:
1. Search the forums here for a stock rom (branded or unbranded).
2. IF AND ONLY IF it installs and of course de-bricks your phone, you might have a working phone but you can kiss warranty goodbye unless you find the stock Cosmote Branded rom
Second edit: I strongly believe your phone is not bricked (aka paperweight), it merely goes into a bootloop (cosmote logo showing non-stop)
themastreM i have an alcatel ot 908 from cosmote to , is there any tutorial for how to root the phone?
Cause i didn't find any tutorial for this phone.
simply use gingerbreak, this works for alcatel on android 2.2 froyo.
i went to cosmote and they repair my phone lucky me!!
ot 908 root
spune-mi te rog daka ai reusit sa rootezi cosmote move,
da se poate roota cu GingerBreak v1.2, acum am o alta problema, doresc sa il deblochez din reteaua Cosmote si nu reusesc, am pierdut ore intregi pe net, asa am reusit sa il brickuiesc si prima oara, nicaieri in oras nu reusesc dupa ce incercarile mele au dat gres !!
Gingerbreak didn't work.
Gingerbreak didn't work for rooting my Alcatel 908s (on Wind). Nor did z4, SuperOneClick, or EasyRoot. I figured Lookout may be the problem. I turned it off, still nothing happened after letting Gingerbreak run on the "Rooting device, this will take a few minutes" screen for over twenty minutes or so.
Froyo 2.2.2 is on my phone. Also, a lot of bloatware I would love to get rid of!
I successfully rooted a Huawei U8100 with Eclair 2.1 before, via z4.
Help me, please.
Hey guys,
Just want to report that I have luck flashing a k450 with US610 firmware.
Please follow the steps at your own risk. I haven't tested if everything still work correctly.
Steps:
1) Download US610 kdz file (just do a quick google search, you should find it in the top results)
2) Extract the kdz with this tool:
https://forum.xda-developers.com/showthread.php?t=2600575
You should get a dz and dll file
3) Use lg flash tool V1.8.1.1023 to flash using the dz file and dll file extracted in step 2.
After the flashing is done, you would boot into a "minios" and
a) you should see a message "Factory reset status 2".
b) Wait a while until the message updates to "Factory reset status 3"
c) power off using pwr+vol- button.
d) power back on it should boot into android. It takes around 5 minutes for first boot.
Now since it wasn't even checking for k450 model vs us610 model mismatch, I suppose one might be able to obtain root by repacking the dz file with appropriate boot/system/recovery image.
While there's no known way to unlock the bootloader for the snaprdragon variants (K450, US610), the bootloader may not be locked to begin with. Therefore If we can repack dz file and still be able to flash a modified dz file (it should be applicable to all models?) I think we would have a good starting point for custom rom.
Questions that need answered:
1) Does download mode accept a modified dz file? i.e. prehaps the individual partition image is signed with a private key by LG and validated using a public key from the device?
2) Does the bootloader allow booting unsigned image?
Please follow the steps at your own risk. I haven't tested if everything still work correctly.
Played with the phone for around 10 mins, haven't seen anything thats not working yet. Specifically
1) Call works (not sure if this phone supports VOLTE - it drops to 3G/H+ when calling)
2) LTE works on tmobile (unlocked before flashing US610 rom)
3) WIFI works
4) Camera works
5) light sensor works
I've tested this phone with the US610 conversion for over 1 week and i couldn't be happier with it. Less bloat and as i replaced the battery too i feel it going a bit faster. Thanks man!
im from mexico my phone is free for every company what kdz US610 i need download for my criket phone?
ayuda
shifooo said:
im from mexico my phone is free for every company what kdz US610 i need download for my criket phone?
Click to expand...
Click to collapse
Amigo a mi se me quedo con el andoid tirado o muerto y la leyenda de no command... pudiste hacer lo del tuto... porque a mi se me quedo como te dije. y no encuentro la manera de ndescargar el firmware de cricket
Hello everyone I have a galaxy s8 + by mistake I installed this firmware G955FXXU2CRED I would like to return to nougat or if there is a way to install the twrp.Thanks
No. Not yet...Bootloader got updated by Samsung to U2 and there's no way to install custom recovery yet...
galaxy s8 plus root
hello everyone I have this firmware G955FXXU2CRED and you can root or install a recovery.Thanks
Do you have OEM UNLOCK enabled in your Developer Options menu?
If so then you possibly can using Odin flash of the TWTP recovery tar file in AP slot....
Is not there OEM in developer options as you unlock? Thank you
[email protected] said:
Hello everyone I have a galaxy s8 + by mistake I installed this firmware G955FXXU2CRED I would like to return to nougat or if there is a way to install the twrp.Thanks
Click to expand...
Click to collapse
OK. So how did you install this firmware? You might be in that 7 day waiting period before OEM UNLOCK becomes available again...the key suggestion there is for you NOT TO reboot your device at all for the next 7 days till OEM UNLOCK becomes available again and then you can flash TWRP and then a custom Nougat ROM after that...
Check in Settings > About Phone > Up time how many hours your device has been on and subtract from (7 x 24)...that's the number of hours you have to wait till OEM UNLOCK should become available...
Moe5508 said:
OK. So how did you install this firmware? You might be in that 7 day waiting period before OEM UNLOCK becomes available again...the key suggestion there is for you NOT TO reboot your device at all for the next 7 days till OEM UNLOCK becomes available again and then you can flash TWRP and then a custom Nougat ROM after that...
Check in Settings > About Phone > Up time how many hours your device has been on and subtract from (7 x 24)...that's the number of hours you have to wait till OEM UNLOCK should become available...
Click to expand...
Click to collapse
EDIT:
There's a trick I've read in another thread for jigging the 7-day waiting period...but I'm only 8 hours away from waiting out the period normally that I don't wanna risk rebooting it and then having to wait another extra 7 days
But some users confirm its working on the U2CRED firmware...
1. Turn on plane mode
2. Go to time setting
3. Change automatic update to manual
4. Change date 8 days back
5. Restart phone
6. Turn on dev options
7. Restart phone
8.Change back date to normal
9. Turn off plane mode
10. You should now have OEM Unlock visible in Developer Options menu ( if not repeat operation till you have it)
What I'd you have one unlocked, but download. Mode say prenormal?
[email protected] said:
Hello everyone I have a galaxy s8 + by mistake I installed this firmware G955FXXU2CRED I would like to return to nougat or if there is a way to install the twrp.Thanks
Click to expand...
Click to collapse
Why the hell would you downgrade to Nougat again?
ChanceGPM said:
Why the hell would you downgrade to Nougat again?
Click to expand...
Click to collapse
Root
FuMMoD said:
Root
Click to expand...
Click to collapse
I am on Oreo with root.
ChanceGPM said:
I am on Oreo with root.
Click to expand...
Click to collapse
Wait what? I have been gone for a few months. There's root for non exynos on oreo now?
FuMMoD said:
Wait what? I have been gone for a few months. There's root for non exynos on oreo now?
Click to expand...
Click to collapse
I got exynos so I don't know
Twrp stuck
Two days now i tried to install TWRP on my 955f with 2CRED stock firmware and my phone stuck on TWRP' s swipe screen!!!
No bootloop!!
No touch sensor!!
Just stuck on TWRP' s splash screen!!!
What's going wrong??
I know how to root a phone, because i had root every phone who was in my hands about 5 years from now.
Can anyone help me?
Maybe you have older version. I tried to root, flashed TWRP and supersu, after first reboot phone was not booting up and got message, only official binaries can be flashed. Then I flashed back official rom with Odin. I've got cred firmware version
---------- Post added at 09:47 PM ---------- Previous post was at 09:45 PM ----------
kOnIgI said:
Two days now i tried to install TWRP on my 955f with 2CRED stock firmware and my phone stuck on TWRP' s swipe screen!!!
No bootloop!!
No touch sensor!!
Just stuck on TWRP' s splash screen!!!
What's going wrong??
I know how to root a phone, because i had root every phone who was in my hands about 5 years from now.
Can anyone help me?
Click to expand...
Click to collapse
It seems you were flashing TWRP for s8 on s8 plus.
geoaka911 said:
Maybe you have older version. I tried to root, flashed TWRP and supersu, after first reboot phone was not booting up and got message, only official binaries can be flashed. Then I flashed back official rom with Odin. I've got cred firmware version
---------- Post added at 09:47 PM ---------- Previous post was at 09:45 PM ----------
It seems you were flashing TWRP for s8 on s8 plus.
Click to expand...
Click to collapse
I have the Same problem with my S8+ 955F
Help needed...I tried many firmware...Odin fails at Sboot.bin...I think my BL is broken..
Don't worry, try latest odin with latest firmware from sammobile.
geoaka911 said:
Don't worry, try latest odin with latest firmware from sammobile.
Click to expand...
Click to collapse
I tried...but Odin failed at Sboot.bin..
SouraV ZeEKz said:
I tried...but Odin failed at Sboot.bin..
Click to expand...
Click to collapse
Eu Tive esse mesmo problema com o arquivo BL o AP CP CSC Instalam se vc n colocar o BL so q dai sem o boot o celular n inicia e o aparelho aparecia erro de binario q meu aparelho estava com o binario 2 a atualização dele pro android 8.0.0 ja instala esse binario e a rom nogaut 7.0 para downgrade so tem com binario 1 por isso do erro e agr ja tem ate o binario 3 estou com a firmware g955fxxu2cred prguei na sammobile essa romdepois de ter ficado um periodo sem aparelho pq ele havia dado loop infinito na tela da samsungde boot pq tentei forcar uma rom nogaut 7.0 com binario 1 dai depois de dois dias estudando oq estava acontecendo q fui me dar conta e depois de muita pesquisa tbm tive q usar um arquivo combination tbm no binario 2 pra poder voltar do loop e instalar uma firmware nova q no caso usei a g955fxxu2cred e agr tbm to lutando pesquisando pra ver se consigo enraizar ou algum modo de aparecer de volta unlock oem mais ta dificil mais uma hr chegamos la....:rir::Boa::Boa::Boa:
Moe5508 said:
EDIT:
There's a trick I've read in another thread for jigging the 7-day waiting period...but I'm only 8 hours away from waiting out the period normally that I don't wanna risk rebooting it and then having to wait another extra 7 days
But some users confirm its working on the U2CRED firmware...
1. Turn on plane mode
2. Go to time setting
3. Change automatic update to manual
4. Change date 8 days back
5. Restart phone
6. Turn on dev options
7. Restart phone
8.Change back date to normal
9. Turn off plane mode
10. You should now have OEM Unlock visible in Developer Options menu ( if not repeat operation till you have it)
Click to expand...
Click to collapse
No work anymore to G950FXXU3CRGH rom.
Alguém consegue por gentileza, disponibilizar o no auth firehose do Poco x4 pro(veux)? Snapdragoon 695
How do I check software for GLG if is corrupted lock the bootloader
como resolver o erro de atualização do software de reparo do assistente da verizon que está apenas processando informações
Mod translaton: how to resolve verizon assistant repair software update error that is only processing information
Why not did ask this question here:
download software repair assistant
Where can I download the software repair assistant. It will not run from my phone itself. My phone tells me to run it and that is all it will do. So, I need a way to download it to install on my PC.
community.verizon.com