Related
**UPDATE**
NEW VERSION
THIS RELIES ON ADB COMMANDS, SO IF YOU DO NOT HAVE USB DEBUGGING TURNED ON, OR A CUSTOM RECOVERY TO BOOT TO, THEN IT WILL NOT BE AS SIMPLE AS JUST RUNING THE PROGRAM.
Another user was having issues because he had an emulator installed, so I updated the file to give you the choice between an emulator, or device. I intend to update further to allow you to check for and select an individual device, that will come soon..
----------------------------------------------------------------------------------------------------------------
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
For anyone having issues...
If you had not previously activated USB Debugging, there are several steps you need to follow in order to enable ADB
SCREEN WORKING TOUCH BROKEN NO CUSTOM RECOVERYfirst, if you can see your screen, and have access to an otg cable, plug a mouse in to the otg cable, and the otg cable into the phone. Use the mouse to enable USB debugging, or to transfer files.
HOW TO ENABLE USB DEBUGGING
SCREEN WORKING TOUCH BROKEN WITH CUSTOM RECOVERYboot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
SCREEN BROKEN TOUCH BROKEN WITH CUSTOM RECOVERYboot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
SCREEN BROKEN TOUCH BROKEN NO CUSTOM RECOVERYnow things get complicated...
*The following is paraphrased from this site
1. download the custom recovery image for your device. Copy the recovery image to a convenient location on your computer, preferably with a short path. We will be placing it on the C Drive directly (not in any folder) and using that in the next steps.
Note: The recovery image should have .img extension. If it is in a zip file, extract the .img file from it.
I recommend clockwork mod non touch from this page
2. Power your device off and reboot your device to FASTBOOT or DOWNLOAD MODE depending on which type of device you have.
(most devices are fastboot, SAMSUNG typically uses DOWNLOAD MODE)
how to boot to fastboot or download mode
[FASTBOOT]3. Connect your device to your computer via USB and wait till you see the PC recognize the device
to check if your device is in fastboot and connected use CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
fastboot devices
you will see a list of connected devices. if not, something went wrong.
4. Launch Command Prompt and type the following commands;
cd c:\android (this is your ADB path, c:\android is default)
fastboot flash recovery c:\recovery.img
5. Wait for the process to finish.
6. Turn device off then boot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
[RECOVERY MODE (SAMSUNG)]USE THE INSTRUCTIONS ON THIS PAGE
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
HOPEFULLY THIS HELPS. REMEMBER TO CHECK THE FORUM PAGE FOR YOUR DEVICE IF YOU RUN INTO ISSUES. THIS ISN'T ANYTHING THE MEMBERS OF XDA HAVEN'T DONE THOUSANDS OF TIMES OVER.
Don't forget to hit "Thanks"
i'll bump this thread for those who didn't see this amazing tool, this tool is really useful, thank you very much
Hi,
Sturggling to find the .adb file as my phone shows up as a "Portable Device" any ideas?
Cheers
Thank you!
I joined just to say thank you to FuzzyMeep Two. Thanks for an awesome tool! It worked better than advertised!
:good:
Thanks again!
-th3r3isnospoon
Question
Hi! Can I use that to restore data not from sdcard but from internal memory of the device? I was storing photos on device memory on my Asus TF300T and now its bricked. I need to restore these photos, my girlfriend has something like 1000 of them from her trip to Caracas. Its very important for her. I already managed to connect the device through fastboot and I launched anb in cmd. What should I do next? Please help me guys
koperkowy said:
Hi! Can I use that to restore data not from sdcard but from internal memory of the device? I was storing photos on device memory on my Asus TF300T and now its bricked. I need to restore these photos, my girlfriend has something like 1000 of them from her trip to Caracas. Its very important for her. I already managed to connect the device through fastboot and I launched anb in cmd. What should I do next? Please help me guys
Click to expand...
Click to collapse
Yes, when it references SD Card it means the internal "SD" storage built in to the phone, not the removable one. It should work as long as ADB can connect.
Sorry for taking so long to reply, i really hope you got your pictures back.
FuzzyMeep Two said:
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
P.S. I apologize if i have posted this in the wrong place, if so please let me know.
Click to expand...
Click to collapse
Really great stuff - so simple but so effective. Cheers and thanks.
Error msg
zobes said:
Really great stuff - so simple but so effective. Cheers and thanks.
Click to expand...
Click to collapse
When i run that tool, i get the error mesg: more than one device and emulator,
I dont want to uninstall the emulator coz it was a headache getting it running
How i procede to select the device to be used
alisdairjk said:
When i run that tool, i get the error mesg: more than one device and emulator,
I dont want to uninstall the emulator coz it was a headache getting it running
How i procede to select the device to be used
Click to expand...
Click to collapse
NEW VERSION
Try this, i haven't gotten to test it, so please let me know if it worked for you, I added the option of selecting an emulator or USB device, because of your post. Hopefully it helps.
When I try to run this I also get an error message saying that the adb.exe file cannot be found.
Please can anyone help?
Joeb29 said:
When I try to run this I also get an error message saying that the adb.exe file cannot be found.
Please can anyone help?
Click to expand...
Click to collapse
Have you also installed ADB, as well as this software?
I'm also having an issue - I have installed java, java SDK and ADB, so I can now run the data recovery tool. But when I do I'm getting "error:device not found" - am I missing drivers or something? I couldn't get all the way on the ADB configuration, because part of it required me to do something on the device... anyway, looks like the computer isn't recognising the the phone at the moment.
Any help very gratefully received (phone is Samsung Galaxy S2).
joffmeister said:
Have you also installed ADB, as well as this software?
I'm also having an issue - I have installed java, java SDK and ADB, so I can now run the data recovery tool. But when I do I'm getting "error:device not found" - am I missing drivers or something? I couldn't get all the way on the ADB configuration, because part of it required me to do something on the device... anyway, looks like the computer isn't recognising the the phone at the moment.
Any help very gratefully received (phone is Samsung Galaxy S2).
Click to expand...
Click to collapse
I have the same situation right now. Managed to make your program work then I get the "error:device not found". My phone does show up in the computer folder(albeit not in mass storage mode), but isn't that what this program was made to work around?
My phone is a LG Optimus G with a smashed glass... The LCD still displays fine, but I'm stuck at my swipe lock because the digitizer is dead.
Thank you for your help and your wonderful program.
Thanks for this app. My girlfriend broke her screen and digitizer on her Galaxy S4. She never turned USB Debugging mode and has a lock on her screen. When using your app I get the same error when I use adb by itself which is "error: closed". ADB detects my phone but any command I use in ADB or with your app I get that same error.
Do you know how to fix this? Thanks in advance.
Thanks a lot man.
dude this tool is just amazing and does exactly what it promised. I was spending sleepless nights thinking about how to recover my data from my broken galaxy nexus and now that I have it I can rest easy. Seriously can't thank you enough for this. Just joined xda to thank you buddy.:laugh::fingers-crossed:
Getting an error "The system cannot find the path specified."
I start the recovery tool, set eh adb path successfully, and then I get this error. If I try running the recovery to pull the DCIM library I get this:
"error: device not found"
What can I do?
Thanks!
Either way this is an amazing tool, seeing how it helped some people already. :good:
Hi, Seem to have the same problem as many others, Device not found. I cant change to MTP mode on my LG G2.
I hope someone can find a solution to this problem.
Program seems amazing doh.
Hello,
This is really a great tool ! I was wondering if you could add the possibility to recover the external sd card aswell.
Device not found
Tried to recover a Samsung Galaxy S3 mini with a broken screen
I installed adb and RecoverData, run it and then get a "device not found error"
What can I do?
Amazing app. thank you so much :good:
FuzzyMeep Two said:
**UPDATE**
NEW VERSION
Another user was having issues because he had an emulator installed, so I updated the file to give you the choice between an emulator, or device. I intend to update further to allow you to check for and select an individual device, that will come soon..
----------------------------------------------------------------------------------------------------------------
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
Don't forget to hit "Thanks"
Click to expand...
Click to collapse
Hi, Thank you very musch, It's so usefull for me.. :angel:
Recently I found out there was a kit kat update for my droid ultra it downloaded the update using 4G LTE and now and decided to install it then the phone shuts down and powers back up on its on I thought it was part of the update but this is the 100th time it's done it ive been waiting 8 hours for it to stop but it just keeps going it's not even showing any sign that it is updating!!!
I tried booting into recovery to factory reset it but whenever I select recovery it just boots up the phone normally HELP PLEASE!!!
response
droidusr2014 said:
Recently I found out there was a kit kat update for my droid ultra it downloaded the update using 4G LTE and now and decided to install it then the phone shuts down and powers back up on its on I thought it was part of the update but this is the 100th time it's done it ive been waiting 8 hours for it to stop but it just keeps going it's not even showing any sign that it is updating!!!
I tried booting into recovery to factory reset it but whenever I select recovery it just boots up the phone normally HELP PLEASE!!!
Click to expand...
Click to collapse
It appears as if you have installed some kind of rooting tool. The reason why the phone boots up normally after you choosing Recovery is because you don't have a custom recovery tool installed.
To solve this same problem, I factory reset my phone. (this is assuming that you have windows) To do this, install the Motorola Device Manager (google it and find the motorola support page, you can download it there) and reboot your computer.
Then connect the usb cable to your computer and download the android SDK platform tools from here -
ht tp://developer.android.com/sdk/index.html#download
^remove the space in ht tp because i can't post links
Extract the /sdk/platform-tools folder to a location which you can easily access.
Then, open command prompt and type
Code:
cd [mydirectory]
for example, if i stored the platform-tools folder on my desktop, i would type
Code:
cd C:\Users\[myusername]\Desktop\platform-tools
then open the bootloader (fastboot) by holding POWER and VOLUME-DOWN instead of just the power button when trying to boot.
OR type this into command prompt (your phone has to be turned on for this)
Code:
adb reboot bootloader
then, once your phone is in the bootloader (do not press anything on your phone at this point), type this in command prompt
Code:
fastboot -w
Remember, this will wipe all your user data / cache but it should make your phone work again. I'm not sure how to do this without factory resetting so if there are any users who are more experienced, feel free to post your better solution. thank you.
Thanks
Thank you so much currently I can't try out your method but it looks like it could work THANK YOU SO MUCH I'm going to try tonight and I'll tell you how it went. I really don't mind factory resetting as long as it saves my phone im all right thanks again :laugh:!!!
Pacnet_ said:
It appears as if you have installed some kind of rooting tool. The reason why the phone boots up normally after you choosing Recovery is because you don't have a custom recovery tool installed.
To solve this same problem, I factory reset my phone. (this is assuming that you have windows) To do this, install the Motorola Device Manager (google it and find the motorola support page, you can download it there) and reboot your computer.
Then connect the usb cable to your computer and download the android SDK platform tools from here -
ht tp://developer.android.com/sdk/index.html#download
^remove the space in ht tp because i can't post links
Extract the /sdk/platform-tools folder to a location which you can easily access.
Then, open command prompt and type
Code:
cd [mydirectory]
for example, if i stored the platform-tools folder on my desktop, i would type
Code:
cd C:\Users\[myusername]\Desktop\platform-tools
then open the bootloader (fastboot) by holding POWER and VOLUME-DOWN instead of just the power button when trying to boot.
OR type this into command prompt (your phone has to be turned on for this)
Code:
adb reboot bootloader
then, once your phone is in the bootloader (do not press anything on your phone at this point), type this in command prompt
Code:
fastboot -w
Remember, this will wipe all your user data / cache but it should make your phone work again. I'm not sure how to do this without factory resetting so if there are any users who are more experienced, feel free to post your better solution. thank you.
Click to expand...
Click to collapse
Will factory reset erase root??
One more thing I actually am currently rooted by using RockMyMoto so I think that is why the update didn't work but 1 last question when I factory reset will it erase root? I don't mind if it erases root but my main concern is that if root somehow stays I won't be able to do the software update.
Pacnet_ said:
It appears as if you have installed some kind of rooting tool. The reason why the phone boots up normally after you choosing Recovery is because you don't have a custom recovery tool installed.
To solve this same problem, I factory reset my phone. (this is assuming that you have windows) To do this, install the Motorola Device Manager (google it and find the motorola support page, you can download it there) and reboot your computer.
Then connect the usb cable to your computer and download the android SDK platform tools from here -
ht tp://developer.android.com/sdk/index.html#download
^remove the space in ht tp because i can't post links
Extract the /sdk/platform-tools folder to a location which you can easily access.
Then, open command prompt and type
Code:
cd [mydirectory]
for example, if i stored the platform-tools folder on my desktop, i would type
Code:
cd C:\Users\[myusername]\Desktop\platform-tools
then open the bootloader (fastboot) by holding POWER and VOLUME-DOWN instead of just the power button when trying to boot.
OR type this into command prompt (your phone has to be turned on for this)
Code:
adb reboot bootloader
then, once your phone is in the bootloader (do not press anything on your phone at this point), type this in command prompt
Code:
fastboot -w
Remember, this will wipe all your user data / cache but it should make your phone work again. I'm not sure how to do this without factory resetting so if there are any users who are more experienced, feel free to post your better solution. thank you.
Click to expand...
Click to collapse
Tried the method and it worked!!
I tried what you said and it worked perfectly but it still remembers my Wifi, wallpaper and all it showed the setup screen and I set it up so hopefully im in the clear the phone is downloading the update right now.
It will not allow the update and you will still end in boot loop. Need to remove root first: http://forum.xda-developers.com/showthread.php?t=2577029
Hi,
My girlfriend's Mi A3 is stuck in bootloop. I know this problem has been often addressed here but first thing: she did not flash ROM or rooted, I'm not even sure what it entirely means and implies. Anyway she found her phone stuck on the screen with 2 choices: try again or factory data reset. See attached files.
The problem here is that she would like to have access to the pictures and do a back up. Sure, she should have done it before but she didn't so here we are...
I've tried the combinations, power button volume down, volume +... Etc. It lead me to the different screens in the attached files...
I want to know, is there any way she can access her pictures, files etc.?
For information, she probably didn't enable the developer options debogging usb or something like that, she has no SD card. I guess we could reset the phone but is there anyway to recover files after that?
Can you guys help us?
Edit: sorry I thought I posted it in the mi A3 thread I don't know if it's best here or there...?
As long as phone is accessible by means of ADB - what's the door to phone's Android , it should be possible to pull out the data you're interested in, otherwise you've no chance.
Oh ok so that's my only chance here?! And how do I process? Doesn't ADB have something to do with the developper option and usb debogging?
I guess if it wasn't already enabled we're screwed?
I fixed it! Someone on reddit gave me some instructions and it worked. For others that might have the same problem...
Download https://dl.google.com/android/repository/platform-tools_r30.0.5-windows.zip and extract them anywhere
Download the ota file https://bigota.d.miui.com/V12.0.3.0...AGlobal_V12.0.3.0.RFQEUXM_a3af6e0308_11.0.ziphttps://bigota.d.miui.com/V12.0.3.0...AGlobal_V12.0.3.0.RFQEUXM_a3af6e0308_11.0.zip and put it in the same folder where adb.exe is. Rename it to "ota.zip".
Launch cmd in the folder where adb.exe is and enter the command "adb start-server"
Choose "apply update from adb" on recovery mode on your device and connect it to your pc
Enter the command "adb devices" to check if adb recognizes your phone and then enter "adb sideload ota.zip"
wait till it finishes
So I had a pixel 6 pro and unfortunately my wife got mad and threw it against the wall a few times, causing the frame to bend and entire back glass to shatter. The front LCD didn't break, but glue came apart and it separated from the frame.
I had all my 2fa accounts on there, as well as very valuable data that I need to recover.
The phone still powers on, but there's nothing visible on the screen. A local repair shop advised we start by replacing the screen and then work on transferring everything out.
I have a replacement pixel 4a and want to be prepared for when my phone comes back online.
What's the best way to backup my 6 pro and restore on the 4a?
I need everything copied as a whole image, and restored on the 4a. I want to be able to boot up my 4a, open my authenticator app, and have all my accounts listed there.
Someone please tell me this is possible, and if so, please post instructions.
Thank you in advance.
I doubt 1:1 image cloning is possible because encryption is hardware-backed and therefore device-unique. it's not even possible to restore backup on origin device after factory reset since android apps can use keystore in TEE.
side note: you could connect HDMI multiport usb-c otg adapter to TV and mouse so you have access to phone at least
aIecxs said:
I doubt 1:1 image cloning is possible because encryption is hardware-backed and therefore device-unique. it's not even possible to restore backup on origin device after factory reset since android apps can use keystore in TEE.
side note: you could connect HDMI multiport usb-c otg adapter to TV and mouse so you have access to phone at least
Click to expand...
Click to collapse
The HDMI multiport didn't work. Nothing was displayed. I don't know if it's because my phone is badly damaged, or if the pixel 6 doesn't support HDMI out over USB C
I tried this one https://www.amazon.com/dp/B081VBSNRZ/ref=cm_sw_r_apan_i_5NF5RPBKZ97YW4KFW9AX
What are my other options?
the best option would be previously unlocked bootloader, so you can have full access. but you did not unlock bootloader so this is no option for you, because unlocking will factory reset device.
HDMI might require some setting or app installed on device. apps can installed remotely from PC google play with proper google play account. not sure how to start an app though, but guess app can autostart.
at least usb keyboard is working, you could try to navigate blind and enable usb-debugging, this would allow you to use scrcpy. maybe connect headphones or use talkback to get some kind of audio feedback.
of course both methods requires some information from another identical device and need to tested on fully functional pixel 6 pro before..
some (not) useful apps
https://forum.xda-developers.com/t/i-broke-my-screen-and-digitizer.4436261/#post-86791963
https://forum.xda-developers.com/t/broke-the-display-of-my-phone.4424413/#post-86676229
https://forum.xda-developers.com/t/...asily-manage-multiple-android-devices.2707556
Anyone else have suggestions?
AcuraKidd said:
Anyone else have suggestions?
Click to expand...
Click to collapse
This is not a full backup, but it might help you interactively recover some items without replacing the broken screen. Also, assuming this is something you're still looking to solve...
If you have adb debugging enabled, you can try to use https://github.com/Genymobile/scrcpy to interact with your phone over USB from a computer.
If you do not have adb debugging enabled, you can try to enable it via Recovery Mode. The steps to enable Recovery Mode below are from https://www.tenorshare.com/android/how-to-enable-usb-debugging-on-android-with-black-screen.html (I have not tried these steps).
Less:
To enable ADB without a screen:
1. Download the ADB toolkit for your computer and extract its contents to a folder.
ADB toolkit can be found at https://developer.android.com/studio/releases/platform-tools
ADB requires you have USB debugging enabled on your phone.
Since your phone has a black screen, reboot your phone into recovery mode to accomplish this.
Press the Volume Down and Power buttons at the same time to enter recovery mode.
2. Connect your phone to your computer, open a Command Prompt window in the ADB folder, and type the following command.
adb devices
3. You should see your device listed there.
Run the following commands one by one.
adb shell
mount data
mount system
4. Use the following command to pull the persist.sys.usb.config file from your phone to the PC.
adb pull /data/property/persist.sys.usb.config C:\Users\[your-username]\Desktop\
5. Access the persist.sys.usb.config file on your computer with a text editor and edit it to mtp,adb.
6. Run the following command to send the file back to your device.
adb push "C:\Users\[your-username]\Desktop/persist.sys.usb.config" /data/property
7. Download the build.prop file from your phone by using this command.
adb pull /system/build.prop C:\Users\[your-username]\Desktop\
8. Launch the build.prop file in a text editor like NotePad++ on your computer, and add the following code to it.
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
9. Save the file and transfer the file back to your device using this command.
adb push "C:\Users\[your-username]\Desktop/build.prop" /system/
10. Reboot your device using the following command.
adb reboot
11. You are all set. Your phone will boot up with USB debugging enabled.
Hello everyone,
my phone (Xiaomi MI 9T) has fallen in the water and now it's partially working.
I really need to recover some data from it, but any method I've found on the internet requires USB Debug active. The phone turns on but it works only as long as it stays on the lock screen or if I go to settings from the notification bar. If I unlock it, the launcher doesn't work (but I can still drag down the notification's bar) and after few seconds the phone reboots I'm also able to activate the toggle of the USB Debug but it looks like it doesn't stay active because if I go back and re-enter developer's section, USB Debug is OFF.
At this point I don't really know what to do. The phone enters fastboot and recovery mode, unfortunately everything is stock, so my possibilities are limited.
I haven't tried to change the screen, but I doubt that would solve the problem, since if I stay in those specific areas, it works fine.
Android version: 10
MIUI 12
Thank you
Dona2592 said:
Hello everyone,
my phone (Xiaomi MI 9T) has fallen in the water and now it's partially working.
I really need to recover some data from it, but any method I've found on the internet requires USB Debug active. The phone turns on but it works only as long as it stays on the lock screen or if I go to settings from the notification bar. If I unlock it, the launcher doesn't work (but I can still drag down the notification's bar) and after few seconds the phone reboots I'm also able to activate the toggle of the USB Debug but it looks like it doesn't stay active because if I go back and re-enter developer's section, USB Debug is OFF.
At this point I don't really know what to do. The phone enters fastboot and recovery mode, unfortunately everything is stock, so my possibilities are limited.
I haven't tried to change the screen, but I doubt that would solve the problem, since if I stay in those specific areas, it works fine.
Android version: 10
MIUI 12
Thank you
Click to expand...
Click to collapse
Due to the security implications of remotely enabling USB Debugging, the only way to enable it is through Developer Options. You can try rebooting to recovery and clearing cache although I am doubtful as to how much that might help you. If your device took a swim, you're going to be looking at repair, which will most likely result in wiping your data.
V0latyle said:
Due to the security implications of remotely enabling USB Debugging, the only way to enable it is through Developer Options. You can try rebooting to recovery and clearing cache although I am doubtful as to how much that might help you. If your device took a swim, you're going to be looking at repair, which will most likely result in wiping your data.
Click to expand...
Click to collapse
Do you know if changing the screen could solve the problem? Or do you think there's a way to copy data 1:1 on another device (such as a used mi 9t I could buy)?
Dona2592 said:
Hello everyone,
my phone (Xiaomi MI 9T) has fallen in the water and now it's partially working.
I really need to recover some data from it, but any method I've found on the internet requires USB Debug active. The phone turns on but it works only as long as it stays on the lock screen or if I go to settings from the notification bar. If I unlock it, the launcher doesn't work (but I can still drag down the notification's bar) and after few seconds the phone reboots I'm also able to activate the toggle of the USB Debug but it looks like it doesn't stay active because if I go back and re-enter developer's section, USB Debug is OFF.
At this point I don't really know what to do. The phone enters fastboot and recovery mode, unfortunately everything is stock, so my possibilities are limited.
I haven't tried to change the screen, but I doubt that would solve the problem, since if I stay in those specific areas, it works fine.
Android version: 10
MIUI 12
Thank you
Click to expand...
Click to collapse
How long ago was it dropped in water, have you allowed it thoroughly dry out? Can you open the body of the device to allow it to dry?
Droidriven said:
How long ago was it dropped in water, have you allowed it thoroughly dry out? Can you open the body of the device to allow it to dry?
Click to expand...
Click to collapse
It stayed in the water for few seconds, the bottom half of it. I shut it down and I let it dry for 2 days, after removing the battery. Anyway I brought it to a center that made a treatment for electronic contacts, an they said that it's needed to change the display first, then run some tests to see what else is wrong. The problem is that changing the screen costs 130€ and, in my opinion, won't solve the issue.
Dona2592 said:
It stayed in the water for few seconds, the bottom half of it. I shut it down and I let it dry for 2 days, after removing the battery. Anyway I brought it to a center that made a treatment for electronic contacts, an they said that it's needed to change the display first, then run some tests to see what else is wrong. The problem is that changing the screen costs 130€ and, in my opinion, won't solve the issue.
Click to expand...
Click to collapse
Can you find a stock update for your specific model number in the form ol stock update.zip that can be flashed in your stock recovery like a OTA update? If so, you might be able to extract the build.prop file from the update then open the build.prop file in a note editor and edit the file by adding or editing lines that enable USB debugging. Then save the file. Then remove everything from the update.zip except for the Meta-inf or "updater script" file/folder then place your modified build.prop file in the update.zip so that it is the only thing in the zip other than the Meta-inf/updater script. Then put it on external sdcard, insert it into your device and boot into stock recovery then choose the option that lets you install updates from sdcard and try flashing your modified update.zip file and reboot the device, if it works, it will enable USB debugging. The next obstacle is getting past your lock screen, which is pointless if the device reboots in seconds. If you can get it to stop rebooting, you might be able to use adb to unlock the lock screen by using adb commands that simulate the touch input required to unlock the screen. You'll have to do some searching to find out the "address" and order of each part of the screen that you need to simulate the touch input on the screen in the right order. It's a bit complicated for those that aren't familiar but it can be done if you do the research.
Or,you can try connecting a USB mouse to the device and see if it will let you open the lock screen.
Droidriven said:
Can you find a stock update for your specific model number in the form ol stock update.zip that can be flashed in your stock recovery like a OTA update? If so, you might be able to extract the build.prop file from the update then open the build.prop file in a note editor and edit the file by adding or editing lines that enable USB debugging. Then save the file. Then remove everything from the update.zip except for the Meta-inf or "updater script" file/folder then place your modified build.prop file in the update.zip so that it is the only thing in the zip other than the Meta-inf/updater script. Then put it on external sdcard, insert it into your device and boot into stock recovery then choose the option that lets you install updates from sdcard and try flashing your modified update.zip file and reboot the device, if it works, it will enable USB debugging. The next obstacle is getting past your lock screen, which is pointless if the device reboots in seconds. If you can get it to stop rebooting, you might be able to use adb to unlock the lock screen by using adb commands that simulate the touch input required to unlock the screen. You'll have to do some searching to find out the "address" and order of each part of the screen that you need to simulate the touch input on the screen in the right order. It's a bit complicated for those that aren't familiar but it can be done if you do the research.
Or,you can try connecting a USB mouse to the device and see if it will let you open the lock screen.
Click to expand...
Click to collapse
Droidriven said:
Can you find a stock update for your specific model number in the form ol stock update.zip that can be flashed in your stock recovery like a OTA update? If so, you might be able to extract the build.prop file from the update then open the build.prop file in a note editor and edit the file by adding or editing lines that enable USB debugging. Then save the file. Then remove everything from the update.zip except for the Meta-inf or "updater script" file/folder then place your modified build.prop file in the update.zip so that it is the only thing in the zip other than the Meta-inf/updater script. Then put it on external sdcard, insert it into your device and boot into stock recovery then choose the option that lets you install updates from sdcard and try flashing your modified update.zip file and reboot the device, if it works, it will enable USB debugging. The next obstacle is getting past your lock screen, which is pointless if the device reboots in seconds. If you can get it to stop rebooting, you might be able to use adb to unlock the lock screen by using adb commands that simulate the touch input required to unlock the screen. You'll have to do some searching to find out the "address" and order of each part of the screen that you need to simulate the touch input on the screen in the right order. It's a bit complicated for those that aren't familiar but it can be done if you do the research.
Or,you can try connecting a USB mouse to the device and see if it will let you open the lock screen.
Click to expand...
Click to collapse
The procedure looks good, I'd give it a try but is there any alternative to the SD card? Cause my phone has no SD slot available. Maybe an external usb card reader to plug into the phone?
Droidriven said:
Can you find a stock update for your specific model number in the form ol stock update.zip that can be flashed in your stock recovery like a OTA update? If so, you might be able to extract the build.prop file from the update then open the build.prop file in a note editor and edit the file by adding or editing lines that enable USB debugging. Then save the file. Then remove everything from the update.zip except for the Meta-inf or "updater script" file/folder then place your modified build.prop file in the update.zip so that it is the only thing in the zip other than the Meta-inf/updater script. Then put it on external sdcard, insert it into your device and boot into stock recovery then choose the option that lets you install updates from sdcard and try flashing your modified update.zip file and reboot the device, if it works, it will enable USB debugging. The next obstacle is getting past your lock screen, which is pointless if the device reboots in seconds. If you can get it to stop rebooting, you might be able to use adb to unlock the lock screen by using adb commands that simulate the touch input required to unlock the screen. You'll have to do some searching to find out the "address" and order of each part of the screen that you need to simulate the touch input on the screen in the right order. It's a bit complicated for those that aren't familiar but it can be done if you do the research.
Or,you can try connecting a USB mouse to the device and see if it will let you open the lock screen.
Click to expand...
Click to collapse
Plus, I don't really get why the system fails right after the lockscreen, I'm actually able to enter the code and the phone unlocks but the launcher seems not working, while the notifications bar works fine, and after some seconds the phone reboots. How can the system work fine in some aspects and bad in others at the same time? Can it be some flash memory issue?
Dona2592 said:
The procedure looks good, I'd give it a try but is there any alternative to the SD card? Cause my phone has no SD slot available. Maybe an external usb card reader to plug into the phone?
Click to expand...
Click to collapse
Yes USB should work in place of sdcard
Dona2592 said:
Plus, I don't really get why the system fails right after the lockscreen, I'm actually able to enter the code and the phone unlocks but the launcher seems not working, while the notifications bar works fine, and after some seconds the phone reboots. How can the system work fine in some aspects and bad in others at the same time? Can it be some flash memory issue?
Click to expand...
Click to collapse
That or kernel panic due to some other important hardware is damaged.
Maybe you can use a adb script to interrupt the running processes right after the device unlocks. Something to stop everything from loading beyond screen unlock. It might allow you to use adb to pull whatever you want from the device via adb pull commands.
Or, if there is a custom recovery for your device and if your bootloader is already unlocked(if it isn', don't unlock it, it will wipe your data), you can install the custom recovery and use it to create a backup of your data then extract your data from the backup.
Droidriven said:
That or kernel panic due to some other important hardware is damaged.
Maybe you can use a adb script to interrupt the running processes right after the device unlocks. Something to stop everything from loading beyond screen unlock. It might allow you to use adb to pull whatever you want from the device via adb pull commands.
Or, if there is a custom recovery for your device and if your bootloader is already unlocked(if it isn', don't unlock it, it will wipe your data), you can install the custom recovery and use it to create a backup of your data then extract your data from the backup.
Click to expand...
Click to collapse
Unfortunately I still have the stock recovery. Plus USB debug is deactivated. What really boggles me is the fact that I can still enter settings and get to developer options, turn ON the toggle of USB debug, but it's like the phone doesn't save the setting, cause if I go back to the main setting screen and enter again developer options, USB debug is OFF. I mean, what the hell?
Having access to device's Stock Recovery you can try as shown below to enable ADB / USB Debug ging: yes you can run Android shell commands from within Android's Stock Recovery.
Unplug device's USB-connection , boot into recovery mode. Having successfully booted into recovery mode, connect device via USB-cable with computer - what switches the USB driver to ADB mode.
Now enable USB debugging via recovery:
Code:
adb shell
echo "persist.service.adb.enable=1" >> /system/build.prop
echo "persist.service.debuggable=1" >> /system/build.prop
echo "persist.sys.usb.config=adb,mtp" >> /system/build.prop"
reboot
Dona2592 said:
Unfortunately I still have the stock recovery. Plus USB debug is deactivated. What really boggles me is the fact that I can still enter settings and get to developer options, turn ON the toggle of USB debug, but it's like the phone doesn't save the setting, cause if I go back to the main setting screen and enter again developer options, USB debug is OFF. I mean, what the hell?
Click to expand...
Click to collapse
Hardware damaged. You're going to have to repair the hardware or forget about retrieving your data, unless you can find a reputable shop that has the equipment and experience to pull your data directly from the chip itself.
xXx yYy said:
Having access to device's Stock Recovery you can try as shown below to enable ADB / USB Debug ging: yes you can run Android shell commands from within Android's Stock Recovery.
Unplug device's USB-connection , boot into recovery mode. Having successfully booted into recovery mode, connect device via USB-cable with computer - what switches the USB driver to ADB mode.
Now enable USB debugging via recovery:
Code:
adb shell
echo "persist.service.adb.enable=1" >> /system/build.prop
echo "persist.service.debuggable=1" >> /system/build.prop
echo "persist.sys.usb.config=adb,mtp" >> /system/build.prop"
reboot
Click to expand...
Click to collapse
Thanks mate, I'll give it a try for sure
Droidriven said:
Hardware damaged. You're going to have to repair the hardware or forget about retrieving your data, unless you can find a reputable shop that has the equipment and experience to pull your data directly from the chip itself.
Click to expand...
Click to collapse
Ok, but do you know what could be the damaged piece of hardware?
Dona2592 said:
Ok, but do you know what could be the damaged piece of hardware?
Click to expand...
Click to collapse
NO
xXx yYy said:
Having access to device's Stock Recovery you can try as shown below to enable ADB / USB Debug ging: yes you can run Android shell commands from within Android's Stock Recovery.
Unplug device's USB-connection , boot into recovery mode. Having successfully booted into recovery mode, connect device via USB-cable with computer - what switches the USB driver to ADB mode.
Now enable USB debugging via recovery:
Code:
adb shell
echo "persist.service.adb.enable=1" >> /system/build.prop
echo "persist.service.debuggable=1" >> /system/build.prop
echo "persist.sys.usb.config=adb,mtp" >> /system/build.prop"
reboot
Click to expand...
Click to collapse
That might work but I've never had any luck with adb in stock recovery, not on the devices that I've owned, at least.
Dona2592 said:
Hello everyone,
my phone (Xiaomi MI 9T) has fallen in the water and now it's partially working.
I really need to recover some data from it, but any method I've found on the internet requires USB Debug active. The phone turns on but it works only as long as it stays on the lock screen or if I go to settings from the notification bar. If I unlock it, the launcher doesn't work (but I can still drag down the notification's bar) and after few seconds the phone reboots I'm also able to activate the toggle of the USB Debug but it looks like it doesn't stay active because if I go back and re-enter developer's section, USB Debug is OFF.
At this point I don't really know what to do. The phone enters fastboot and recovery mode, unfortunately everything is stock, so my possibilities are limited.
I haven't tried to change the screen, but I doubt that would solve the problem, since if I stay in those specific areas, it works fine.
Android version: 10
MIUI 12
Thank you
Click to expand...
Click to collapse
Is your bootloader locked?
Droidriven said:
That might work but I've never had any luck with adb in stock recovery, not on the devices that I've owned, at least.
Click to expand...
Click to collapse
Yeah in fact when I type "adb shell" it gives me error, but I can enter fastboot mode and the phone is seen. Unfortunately I can't do much from there
Arealhooman said:
Is your bootloader locked?
Click to expand...
Click to collapse
Yeah. **** me, for once I kept everything stock and this happened . I've always rooted and customized my phones and nothing like this has ever happened.