Related
My screen first cracked and then the LCD completely went now... I have files I need to retrieve off the phone. It is rooted and running some ICS build... I believe the phone is in USB debugging mode, the screen still 'works' I can unlock the phone but nothing is displayed on the screen. Possibly someone could help me out with the adb process for pulling the contents off the /sd
Any help will be GREATLY appreciated, thank you for your time.
ur usb mass storage should still work. can u just plug ur phone to a usb port and get things off the phone ?
As previously stated. I believe the phone was in USB debugging mode. And now the screen is completely black... impossible to navigate to where i need to be.
You'll need adb setup on your computer, and you'll need to cd your way into the folder with adb.exe. Forgive me for hotlinking, but this will make it easier: Download this file, courtesy of NexusSHacks.com (I believe it is Zedomax around here). I would advise to unzip the contents in this file to your C:\Nexus directory, so that adb.exe is at C:\Nexus\adb.exe.
Now, plug in your phone. Open your start menu and search for "cmd" and open up Command Prompt. This is the basic Windows CLI (Command Line Interface).
First, you'll need to open the directory of the Nexus folder you created earlier. To do this, type in the command prompt:
Code:
cd C:\Nexus
Now, you want to make sure adb sees your phone:
Code:
adb devices
The adb service should start and if it sees your phone it will pop up a serial number. If there is no serial number, you can't use adb while inside android and you'll need to tick the option or find an alternative way. Assuming it finds your device, you are good to go.
In order to copy the /sdcard folder of your Nexus S, you will use the pull command. We will throw all of the files into C:\Nexus\sdcard, for reference. So in the command prompt, type:
Code:
adb pull /sdcard .\sdcard
It looks a little confusing but don't stress. Just make sure you type it in exactly (dot, correct slash, etc). This will take a little while since it might transfer up to ~15GB worth. You'll see a new line with "C:\Nexus>" with a flashing cursor when it is done. Then you can view all the contents of your sdcard at C:\Nexus\sdcard and do with them as you please.
Also note, for this you'll need up to ~15GB of free space on your C:\ partition, make sure you have this before you start. Good luck
old post I know, but I just dropped my Samsung Captivate (rooted with debugging on) and internal screen cracked (gorilla glass is perfectly fine!), so I am in the same boat. After DAYS... actually DAYS of trying everything from every forum I FOUND A FIX!!!
Now admittedly, I am unsure which of these two (or both) fixed the issue, but here is what I did:
via Google Play's online "shop", I installed "Auto Mount Your SD Card" by JRTStudio (admittingly, unsure if this did anything as I cannot verify if it installed or anything via the phone)
https://play.google.com/store/apps/...wsMSwxLDEsImNvbS5qcnRzdHVkaW8uYXV0b21vdW50Il0.
then I DL'ed MoboRobo and after a few frustrated phone reboots, usb cable connections and much cursing IT CONNECTED!
http://www.moborobo.com/
I am currently DLing all my files from my broken phone!
I had to pass this along as I said... NOBODY seems to know about this as it has taken me DAYS to do this! Not even ATT (Current carrier) nor Spring (whom I am switching to in a month or so) could help me!
You save my life with that "moborobo". Thank you very much.
Glad I could help!!!
Thanks went to both of u, quit important piece of knowledge.
One question; r u downloading "moborobo" on ur Android, on your pc or on both of them?
just on PC, not needed on the phone unless you want to go via WiFi
Harbb said:
If there is no serial number, you can't use adb while inside android and you'll need to tick the option or find an alternative way.
Click to expand...
Click to collapse
What do you mean by this?
My adb service doesn't detect my phone, I used Droidzone's tutorial. I believe usb debugging needs to be on for adb to work, which in my case is useless cause my screen is broken so can't turn on usb debugging.
This is what happens:
---------------------------
C:\>adb devices
List of devices attached
C:\>
---------------------------
---------- Post added at 11:31 PM ---------- Previous post was at 11:23 PM ----------
^when I say broken, I mean the whole screen is distorted, I cannot see anything
droidoidoid said:
What do you mean by this?
My adb service doesn't detect my phone, I used Droidzone's tutorial. I believe usb debugging needs to be on for adb to work, which in my case is useless cause my screen is broken so can't turn on usb debugging.
This is what happens:
---------------------------
C:\>adb devices
List of devices attached
C:\>
---------------------------
---------- Post added at 11:31 PM ---------- Previous post was at 11:23 PM ----------
^when I say broken, I mean the whole screen is distorted, I cannot see anything
Click to expand...
Click to collapse
Reboot to recovery. Bam, working ADB. You can navigate there pretty easily. Pull battery, then re-insert. VOL + & PWR, two click on VOL -, PWR button once. You're in recovery now.
QtADB also can be used is this case
http://qtadb.wordpress.com/download/
paskalion said:
QtADB also can be used is this case
http://qtadb.wordpress.com/download/
Click to expand...
Click to collapse
No go on this either.
Downloaded QtADB, ran the .exe
Pointed to the folder with the aapt and adb binaries, program opened up
Phone's connected and on (I can hear texts coming through), hit refresh a few times, still not detecting
polobunny said:
Reboot to recovery. Bam, working ADB. You can navigate there pretty easily. Pull battery, then re-insert. VOL + & PWR, two click on VOL -, PWR button once. You're in recovery now.
Click to expand...
Click to collapse
That's a little tough. I'm using a Galaxy S so I'm following instructions for that, but it's hard to know if I'm in recovery mode or not. Since adb doesn't detect the device, it's hard to know whether the phone went into recovery mode, or whether adb is setup correctly. It would be handy for a voice sample to play "recovery mode" once the phone boots into it.
droidoidoid said:
That's a little tough. I'm using a Galaxy S so I'm following instructions for that, but it's hard to know if I'm in recovery mode or not. Since adb doesn't detect the device, it's hard to know whether the phone went into recovery mode, or whether adb is setup correctly. It would be handy for a voice sample to play "recovery mode" once the phone boots into it.
Click to expand...
Click to collapse
You're in the wrong forum, then.
And whether or not adb is installed properly, you would know in your device manager under Windows. Appears as a device.
polobunny said:
You're in the wrong forum, then.
And whether or not adb is installed properly, you would know in your device manager under Windows. Appears as a device.
Click to expand...
Click to collapse
Ok... Galaxy S i9000 stuff goes in the Galaxy S i9000 forum.... that's probably why my other post got deleted! :laugh:
As for adb... it appears as a process in task manager, so it's running - I know that much. It's not appearing as a device in device manager (why would it if it's a process? or are you referring to my phone appearing as a device?)
Only areas I can think of that aren't correct are the environment variable and the way I'm doing recovery mode. Since I can't see the screen, I don't know which one is causing the issue! :crying:
Samsung broken??
Contact this guy in Paris , he's very good and friendly!! he repairs my blue Galaxy S3 in front of me
Tel: 0950 850 500 Direct Technique
repare-galaxy com
don't hesitate to call them because i know their skills and it's very good!!
tell them that u call from Mike ciao guys!!
Problem!
Harbb said:
Code:
adb pull /sdcard .\sdcard
It looks a little confusing but don't stress. Just make sure you type it in exactly (dot, correct slash, etc). This will take a little while since it might transfer up to ~15GB worth. You'll see a new line with "C:\Nexus>" with a flashing cursor when it is done. Then you can view all the contents of your sdcard at C:\Nexus\sdcard and do with them as you please.
Click to expand...
Click to collapse
Hey, I got to this problem and I got stuck. I also have a Nexus S with a cracked screen. When I put in the final phrase into the command window it just told me that 0 filles were pulled! Why didnt it pull my files?
What I am trying to do is get all of my pictures and others off the phone.
Please help!
SkullMblem said:
Hey, I got to this problem and I got stuck. I also have a Nexus S with a cracked screen. When I put in the final phrase into the command window it just told me that 0 filles were pulled! Why didnt it pull my files?
What I am trying to do is get all of my pictures and others off the phone.
Please help!
Click to expand...
Click to collapse
This happened to me as well. You have to make sure that your phone has its sdcard folder mounted. Type "adb shell" to get access to the phones command terminal. Then type in "mount /sdcard" I think, or maybe it was "mount sdcard". Either way will probably work so long as you are in the root directory of the phone. You can navigate around in the phone just like a normal linux terminal. "ls" shows list of files and folders in the current directory, "cd foldername" moves into a folder, "cd ../" moves back, "cd /" goes to root directory, etc. Anyhow, once you have mounted the sdcard, you can type exit to leave the shell terminal, and then issue the command "adb pull /sdcard .\sdcard" to get the files. I had a custom rom image in the root of my sdcard so the move took quite a while ~15 minutes. On success of the pull command you should see a bunch of statuses like:
pull: sdcard/data/somefile -> .\sdcard/data/somefile
pull: sdcard/DCIM/somefile -> .\sdcard/DCIM/somefile
.
.
.
XXXX files pulled. 0 files skipped
(Some more transmission stats)
Hope it works out for who ever reads this.
Side note:
On my phone the screen was smashed. I replaced it and it still would not turn on, but it was still running. I had a rooted phone with CM10 rom on it. ADB debugging was one (if its off your pretty much screwed). I started up the phone, and plugged in the usb cable. I tried to use both adb and fastboot from windows terminal. "fastboot devices" would echo back nothing, and "adb devices" would echo back my phone's device number but state it was offline. So to get it online I did the following:
1.) pull batttery.
2.) boot into bootloader (hold power and volume up) the phone shouldn't vibrate if it does you have just normally powered it on. It took me quite a few times to get this to go into the bootloader. To make sure you get in the bootloader type "fastboot devices". If nothing comes up you not there.
3.) once verified you are in the bootloader you need to go into recover mode. Press volume down twice and then hit power (this would normally move the cursor on your phone down to recovery and select it if you could see whats happening on the screen).
4.) wait a bit for it to load into recovery, try typing "adb devices". You should eventually see you device show up as online. At this point you may enter the shell as above, mount the sdcard, exit the shell and pull your files.
Windows instuctions:
Prerequisites are installing adb.exe and fastboot.exe via installing the Android SDK on your computer. They will show up in the platform-tools folder of the install location. Add that folder to your environmental path variable so you can run the ADB and fastboot commands from any folder. Install the ADB driver for your phone (allows you to issue adb commands to your phone when USB is plugged in) by plugging in your phone and going to device manager, find your phone which should show up as a exclamation point, right click update driver, click "browse...", then "let me pick...", click top entry something like "show all", and then let the list populate. On the left look for "samsung" and then select the first one that is something like "samsung adb driver interface". And you should be good to go.
Sorry for the long winded post, I just like to try and explain as much as possible.
Successfully Recoverd data
Well My Samsung S2's Screen broke down few days ago.. Now i have retrieved the data by following the 2nd method in the following article..! I Hope this works for you aswell...
I can not Post the link here.. PM me if you want the link...!
My daughter's Nexus S touchscreen has died. It died slowly in that on the first few occasions she couild pop the battery and it would come back. Now it won't come back at all and is stuck on the pattern lock screen.
Before we send the phone for repair under warranty she is keen to get the photos off the phone since a repair might reset the phone. I was thinking we could mount the phone as a USB device but it doesn't show up perhaps because it won't until the pattern lock is entered else anybody could get data off your phone bypassing security.
Any other things we could try before giving up and hoping the repair doesn't delete all the data?
Thanks
Boot into recovery, make a nand then extract data through adb?
adb pull /sdcard/path-to-whatever
Can you explain the path to whatever? Like if I want it in folder "A" on the desktop.
Sent from my Galaxy Nexus using Tapatalk 2
Check this thread
http://forum.xda-developers.com/showthread.php?t=1573744
treUse said:
adb pull /sdcard/path-to-whatever
Click to expand...
Click to collapse
Out of interest I tried this on my GN. adb recognises the phone and adb devices shows the serial number. But adb pull /sdcard says invalid remote file. No idea what that means since using ES File Explorer sdcard is a valid directory on the phone (and I suppose it would also be on the Nexus S)
lchiu7 said:
Out of interest I tried this on my GN. adb recognises the phone and adb devices shows the serial number. But adb pull /sdcard says invalid remote file. No idea what that means since using ES File Explorer sdcard is a valid directory on the phone (and I suppose it would also be on the Nexus S)
Click to expand...
Click to collapse
ADB "thought" you meant to copy a file.
To copy the entire sdcard directory you should do something like this:
Code:
adb pull /sdcard/ sdcard/backup/on/pc/
The command parameters are "adb pull <source> <destination>"
Just make sure source ends with a /
Maybe a Windows based software?? Droid Explorer, very useful.. http://de.codeplex.com/ :good:
Well I finally got the phone to play with. The screen indeed dead. I installed the Google USB drivers from the SDK and also the Samsung drivers.
When I boot the phone into the recovery menu I can run fastboot devices and see the following
????0AC4B09900?? fastboot (of course the ? are not there but I wanted to anonmyuse the serial)
So far so good.
In device manager under Android Phone it show Samsung Android ADB Interface
But if I try adb devices I get nothing.
Forgot to mention my daughter said USB Debugging was turned off but I am not sure that makes any difference and anyway, we can't boot Android to turn it on
So I select Recovery and see the Android with the exclamation mark. Windows beeps to indicate that some sort of devices has been installed,
But in Device Manager no phone shows which explains why adb can't fidn the phone but not why.
I can bring up the recovery menu but still no adb
Any suggestions?
Thanks
Boot into Fastboot and flash CWM Recovery.
RL77LUC said:
Boot into Fastboot and flash CWM Recovery.
Click to expand...
Click to collapse
But it looks like I have to unlock the bootloader to do that and the phone is still under warranty so that would invalidate the warranty wouldn't it? She would like to get the data off the phone. A screen fix shouldn't zap the memory but you never know.
what this device installed CWM?? if installed cwm just bot it to cwm an goto mass storage
cukdus said:
what this device installed CWM?? if installed cwm just bot it to cwm an goto mass storage
Click to expand...
Click to collapse
The phone is stock
lchiu7 said:
The phone is stock
Click to expand...
Click to collapse
If you unlock the bootloader to flash CWM your memory will also be wiped, so you will loose all the photos you want to save, so don't do that.
Also if you have the USB debugging off, the ADB commands won't work. I'm afraid you're SOL, since you have the bootloader locked you can't flash a kernel with USB host, that would allow you to use a mouse to navigate in the phone and since you don't have USB debug you can't pull files from the "SDcard"... Better take it to the store and try to ask them if they can save the photos before they do anything to the phone, but i guess if it's a digitalizer problem, they won't mess with the NAND.
Check out http://www.moborobo.com/ and see if it works for you.
If you have root you have extended functionality, like control the device from the PC. But if i recall correctly, even without root you should be able to get your files.
**UPDATE**
NEW VERSION
THIS RELIES ON ADB COMMANDS, SO IF YOU DO NOT HAVE USB DEBUGGING TURNED ON, OR A CUSTOM RECOVERY TO BOOT TO, THEN IT WILL NOT BE AS SIMPLE AS JUST RUNING THE PROGRAM.
Another user was having issues because he had an emulator installed, so I updated the file to give you the choice between an emulator, or device. I intend to update further to allow you to check for and select an individual device, that will come soon..
----------------------------------------------------------------------------------------------------------------
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
For anyone having issues...
If you had not previously activated USB Debugging, there are several steps you need to follow in order to enable ADB
SCREEN WORKING TOUCH BROKEN NO CUSTOM RECOVERYfirst, if you can see your screen, and have access to an otg cable, plug a mouse in to the otg cable, and the otg cable into the phone. Use the mouse to enable USB debugging, or to transfer files.
HOW TO ENABLE USB DEBUGGING
SCREEN WORKING TOUCH BROKEN WITH CUSTOM RECOVERYboot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
SCREEN BROKEN TOUCH BROKEN WITH CUSTOM RECOVERYboot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
SCREEN BROKEN TOUCH BROKEN NO CUSTOM RECOVERYnow things get complicated...
*The following is paraphrased from this site
1. download the custom recovery image for your device. Copy the recovery image to a convenient location on your computer, preferably with a short path. We will be placing it on the C Drive directly (not in any folder) and using that in the next steps.
Note: The recovery image should have .img extension. If it is in a zip file, extract the .img file from it.
I recommend clockwork mod non touch from this page
2. Power your device off and reboot your device to FASTBOOT or DOWNLOAD MODE depending on which type of device you have.
(most devices are fastboot, SAMSUNG typically uses DOWNLOAD MODE)
how to boot to fastboot or download mode
[FASTBOOT]3. Connect your device to your computer via USB and wait till you see the PC recognize the device
to check if your device is in fastboot and connected use CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
fastboot devices
you will see a list of connected devices. if not, something went wrong.
4. Launch Command Prompt and type the following commands;
cd c:\android (this is your ADB path, c:\android is default)
fastboot flash recovery c:\recovery.img
5. Wait for the process to finish.
6. Turn device off then boot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
[RECOVERY MODE (SAMSUNG)]USE THE INSTRUCTIONS ON THIS PAGE
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
HOPEFULLY THIS HELPS. REMEMBER TO CHECK THE FORUM PAGE FOR YOUR DEVICE IF YOU RUN INTO ISSUES. THIS ISN'T ANYTHING THE MEMBERS OF XDA HAVEN'T DONE THOUSANDS OF TIMES OVER.
Don't forget to hit "Thanks"
i'll bump this thread for those who didn't see this amazing tool, this tool is really useful, thank you very much
Hi,
Sturggling to find the .adb file as my phone shows up as a "Portable Device" any ideas?
Cheers
Thank you!
I joined just to say thank you to FuzzyMeep Two. Thanks for an awesome tool! It worked better than advertised!
:good:
Thanks again!
-th3r3isnospoon
Question
Hi! Can I use that to restore data not from sdcard but from internal memory of the device? I was storing photos on device memory on my Asus TF300T and now its bricked. I need to restore these photos, my girlfriend has something like 1000 of them from her trip to Caracas. Its very important for her. I already managed to connect the device through fastboot and I launched anb in cmd. What should I do next? Please help me guys
koperkowy said:
Hi! Can I use that to restore data not from sdcard but from internal memory of the device? I was storing photos on device memory on my Asus TF300T and now its bricked. I need to restore these photos, my girlfriend has something like 1000 of them from her trip to Caracas. Its very important for her. I already managed to connect the device through fastboot and I launched anb in cmd. What should I do next? Please help me guys
Click to expand...
Click to collapse
Yes, when it references SD Card it means the internal "SD" storage built in to the phone, not the removable one. It should work as long as ADB can connect.
Sorry for taking so long to reply, i really hope you got your pictures back.
FuzzyMeep Two said:
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
P.S. I apologize if i have posted this in the wrong place, if so please let me know.
Click to expand...
Click to collapse
Really great stuff - so simple but so effective. Cheers and thanks.
Error msg
zobes said:
Really great stuff - so simple but so effective. Cheers and thanks.
Click to expand...
Click to collapse
When i run that tool, i get the error mesg: more than one device and emulator,
I dont want to uninstall the emulator coz it was a headache getting it running
How i procede to select the device to be used
alisdairjk said:
When i run that tool, i get the error mesg: more than one device and emulator,
I dont want to uninstall the emulator coz it was a headache getting it running
How i procede to select the device to be used
Click to expand...
Click to collapse
NEW VERSION
Try this, i haven't gotten to test it, so please let me know if it worked for you, I added the option of selecting an emulator or USB device, because of your post. Hopefully it helps.
When I try to run this I also get an error message saying that the adb.exe file cannot be found.
Please can anyone help?
Joeb29 said:
When I try to run this I also get an error message saying that the adb.exe file cannot be found.
Please can anyone help?
Click to expand...
Click to collapse
Have you also installed ADB, as well as this software?
I'm also having an issue - I have installed java, java SDK and ADB, so I can now run the data recovery tool. But when I do I'm getting "error:device not found" - am I missing drivers or something? I couldn't get all the way on the ADB configuration, because part of it required me to do something on the device... anyway, looks like the computer isn't recognising the the phone at the moment.
Any help very gratefully received (phone is Samsung Galaxy S2).
joffmeister said:
Have you also installed ADB, as well as this software?
I'm also having an issue - I have installed java, java SDK and ADB, so I can now run the data recovery tool. But when I do I'm getting "error:device not found" - am I missing drivers or something? I couldn't get all the way on the ADB configuration, because part of it required me to do something on the device... anyway, looks like the computer isn't recognising the the phone at the moment.
Any help very gratefully received (phone is Samsung Galaxy S2).
Click to expand...
Click to collapse
I have the same situation right now. Managed to make your program work then I get the "error:device not found". My phone does show up in the computer folder(albeit not in mass storage mode), but isn't that what this program was made to work around?
My phone is a LG Optimus G with a smashed glass... The LCD still displays fine, but I'm stuck at my swipe lock because the digitizer is dead.
Thank you for your help and your wonderful program.
Thanks for this app. My girlfriend broke her screen and digitizer on her Galaxy S4. She never turned USB Debugging mode and has a lock on her screen. When using your app I get the same error when I use adb by itself which is "error: closed". ADB detects my phone but any command I use in ADB or with your app I get that same error.
Do you know how to fix this? Thanks in advance.
Thanks a lot man.
dude this tool is just amazing and does exactly what it promised. I was spending sleepless nights thinking about how to recover my data from my broken galaxy nexus and now that I have it I can rest easy. Seriously can't thank you enough for this. Just joined xda to thank you buddy.:laugh::fingers-crossed:
Getting an error "The system cannot find the path specified."
I start the recovery tool, set eh adb path successfully, and then I get this error. If I try running the recovery to pull the DCIM library I get this:
"error: device not found"
What can I do?
Thanks!
Either way this is an amazing tool, seeing how it helped some people already. :good:
Hi, Seem to have the same problem as many others, Device not found. I cant change to MTP mode on my LG G2.
I hope someone can find a solution to this problem.
Program seems amazing doh.
Hello,
This is really a great tool ! I was wondering if you could add the possibility to recover the external sd card aswell.
Device not found
Tried to recover a Samsung Galaxy S3 mini with a broken screen
I installed adb and RecoverData, run it and then get a "device not found error"
What can I do?
Amazing app. thank you so much :good:
FuzzyMeep Two said:
**UPDATE**
NEW VERSION
Another user was having issues because he had an emulator installed, so I updated the file to give you the choice between an emulator, or device. I intend to update further to allow you to check for and select an individual device, that will come soon..
----------------------------------------------------------------------------------------------------------------
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
Don't forget to hit "Thanks"
Click to expand...
Click to collapse
Hi, Thank you very musch, It's so usefull for me.. :angel:
My nexus 7 (2013) just did the stuck on X during start up thing. I have a bunch of photos from my vacation on it that I would like not to lose.
I've been reading up on adb and so far have installed the SDK and toolkit. My PC recognizes that my nexus is attached when I put it into adb sideload mode.
But I'm too new to know where to go from there. There is a lot out there about using the sideloader to do various things but haven't found anything that would help me so far.
Can I somehow use an adb backup command if install a zip file with the proper commands?
Is there a way to reinstall the OS via adb sideload to get the nexus running again without wiping the internal storage?
There have been some methods mentioned that involve have USB debugging enabled or the bootloader unlocked.
But I don't have USB debugging enabled and my bootloader is locked. I couldn't find a way to enable USB debugging without the nexus being able to start up. It looks like unlocking the bootloader requires a factory reset.
You can try to use adb to get your pictures. It's located in %sdk_folder%/platform-tools.
Simply use this command to get your files
Code:
adb pull /sdcard/Pictures /destination_folder
You can also push files to your sdcard while using the push command. I would try this to push a backup to the sdcard.
Are you able to get in recovery mode (CWM etc.)?
lective renzak
Most adb commands gives me "error:closed"
adb devices gives <serial number> sideload
I can upload a zip file via sideload. I just uploaded a zip file with an empty text document. It gave me an error that the update package failed which was expected.
I know nothing about update packages.
Is there one I could install that would get the nexus working without wiping out my pictures?
I was able to install an OTA update over the adb sideloader. So at least something is working.
I was hoping that installing the update would fix things but the nexus still gets stuck on X when starting up.
I'm wondering if I can insert something into the update installer script to do a backup or pull....
There is an install-recovery.sh script that I could potentially edit and then back up.
I there a command I could put into it that would do something equivalent to an adb pull or backup?
If anyone could give me a place to start, I'd really appreciate it.
I am in the same situation as you I have found nothing and only your posts on other forums!
If you have the stock configuration with usb debugging off and the bootloader locked, you're stuck. At least I couldn't figure out anything after many hours and weeks of asking. Had to bite the bullet and do a wipe. I rooted it when I did the wipe so I could try various recovery tools.
I tried dr fone and hexamob recovery and some other ones but no luck.
The nexus toolkit helped me out a bunch to try out adb commands and install a rooted system.
Sorry I don't have better news.
For backup services, I think shutterfly gives you unlimited photo only backups. For others you can do a combination of google drive, dropbox, amazon, etc. Amazon has some special thing for music I believe.
do u have the link for OTA zip file
AM struck at the same point with my Samsung note 3 . i need the link for ota update so that i can update my OS using ADB sideload . i tried downloading a zip file from sammobile but its gives me an error
E: footer is wrong
E: signature verification failed
i don't know what else i can do .
i tried DR fone i shows my pictures but never completes the backup process and shuts down.
plz help guys
What's your problem with the note 3? Solution likely different than my nexus issue. The Samsung phones do have a power button issue. Either doesn't work or gets stuck in the pressed position so when you try to start it continues to restart. If that's the case try fiddling around with power button. I find it helpful to pull the phone apart so I can get at the actual button.
i checked the power button is fine because it say up in recovery mode but keeps restarting in safe mode or normal mode. i need to either backup my data on the device using the recovery mode or update my device so that i can fix the corrupted OS. but when i try to do a OTA update using adb sideload and a zip file that i downloaded from sammobile it gives me this error :
E: footer is wrong
E: signature verification failed
. or just help me to backup my pictures using the recovery so that i can just do a factory reset any help would be appreciated. Thanks
Haha, got the same problems. But I do have USB Debugging on - does not help anything. Crazy, if you consider that files are there but you have to delete them in order to correct the stubbornness of the OEMs....
Hello everyone,
my phone (Xiaomi MI 9T) has fallen in the water and now it's partially working.
I really need to recover some data from it, but any method I've found on the internet requires USB Debug active. The phone turns on but it works only as long as it stays on the lock screen or if I go to settings from the notification bar. If I unlock it, the launcher doesn't work (but I can still drag down the notification's bar) and after few seconds the phone reboots I'm also able to activate the toggle of the USB Debug but it looks like it doesn't stay active because if I go back and re-enter developer's section, USB Debug is OFF.
At this point I don't really know what to do. The phone enters fastboot and recovery mode, unfortunately everything is stock, so my possibilities are limited.
I haven't tried to change the screen, but I doubt that would solve the problem, since if I stay in those specific areas, it works fine.
Android version: 10
MIUI 12
Thank you
Dona2592 said:
Hello everyone,
my phone (Xiaomi MI 9T) has fallen in the water and now it's partially working.
I really need to recover some data from it, but any method I've found on the internet requires USB Debug active. The phone turns on but it works only as long as it stays on the lock screen or if I go to settings from the notification bar. If I unlock it, the launcher doesn't work (but I can still drag down the notification's bar) and after few seconds the phone reboots I'm also able to activate the toggle of the USB Debug but it looks like it doesn't stay active because if I go back and re-enter developer's section, USB Debug is OFF.
At this point I don't really know what to do. The phone enters fastboot and recovery mode, unfortunately everything is stock, so my possibilities are limited.
I haven't tried to change the screen, but I doubt that would solve the problem, since if I stay in those specific areas, it works fine.
Android version: 10
MIUI 12
Thank you
Click to expand...
Click to collapse
Due to the security implications of remotely enabling USB Debugging, the only way to enable it is through Developer Options. You can try rebooting to recovery and clearing cache although I am doubtful as to how much that might help you. If your device took a swim, you're going to be looking at repair, which will most likely result in wiping your data.
V0latyle said:
Due to the security implications of remotely enabling USB Debugging, the only way to enable it is through Developer Options. You can try rebooting to recovery and clearing cache although I am doubtful as to how much that might help you. If your device took a swim, you're going to be looking at repair, which will most likely result in wiping your data.
Click to expand...
Click to collapse
Do you know if changing the screen could solve the problem? Or do you think there's a way to copy data 1:1 on another device (such as a used mi 9t I could buy)?
Dona2592 said:
Hello everyone,
my phone (Xiaomi MI 9T) has fallen in the water and now it's partially working.
I really need to recover some data from it, but any method I've found on the internet requires USB Debug active. The phone turns on but it works only as long as it stays on the lock screen or if I go to settings from the notification bar. If I unlock it, the launcher doesn't work (but I can still drag down the notification's bar) and after few seconds the phone reboots I'm also able to activate the toggle of the USB Debug but it looks like it doesn't stay active because if I go back and re-enter developer's section, USB Debug is OFF.
At this point I don't really know what to do. The phone enters fastboot and recovery mode, unfortunately everything is stock, so my possibilities are limited.
I haven't tried to change the screen, but I doubt that would solve the problem, since if I stay in those specific areas, it works fine.
Android version: 10
MIUI 12
Thank you
Click to expand...
Click to collapse
How long ago was it dropped in water, have you allowed it thoroughly dry out? Can you open the body of the device to allow it to dry?
Droidriven said:
How long ago was it dropped in water, have you allowed it thoroughly dry out? Can you open the body of the device to allow it to dry?
Click to expand...
Click to collapse
It stayed in the water for few seconds, the bottom half of it. I shut it down and I let it dry for 2 days, after removing the battery. Anyway I brought it to a center that made a treatment for electronic contacts, an they said that it's needed to change the display first, then run some tests to see what else is wrong. The problem is that changing the screen costs 130€ and, in my opinion, won't solve the issue.
Dona2592 said:
It stayed in the water for few seconds, the bottom half of it. I shut it down and I let it dry for 2 days, after removing the battery. Anyway I brought it to a center that made a treatment for electronic contacts, an they said that it's needed to change the display first, then run some tests to see what else is wrong. The problem is that changing the screen costs 130€ and, in my opinion, won't solve the issue.
Click to expand...
Click to collapse
Can you find a stock update for your specific model number in the form ol stock update.zip that can be flashed in your stock recovery like a OTA update? If so, you might be able to extract the build.prop file from the update then open the build.prop file in a note editor and edit the file by adding or editing lines that enable USB debugging. Then save the file. Then remove everything from the update.zip except for the Meta-inf or "updater script" file/folder then place your modified build.prop file in the update.zip so that it is the only thing in the zip other than the Meta-inf/updater script. Then put it on external sdcard, insert it into your device and boot into stock recovery then choose the option that lets you install updates from sdcard and try flashing your modified update.zip file and reboot the device, if it works, it will enable USB debugging. The next obstacle is getting past your lock screen, which is pointless if the device reboots in seconds. If you can get it to stop rebooting, you might be able to use adb to unlock the lock screen by using adb commands that simulate the touch input required to unlock the screen. You'll have to do some searching to find out the "address" and order of each part of the screen that you need to simulate the touch input on the screen in the right order. It's a bit complicated for those that aren't familiar but it can be done if you do the research.
Or,you can try connecting a USB mouse to the device and see if it will let you open the lock screen.
Droidriven said:
Can you find a stock update for your specific model number in the form ol stock update.zip that can be flashed in your stock recovery like a OTA update? If so, you might be able to extract the build.prop file from the update then open the build.prop file in a note editor and edit the file by adding or editing lines that enable USB debugging. Then save the file. Then remove everything from the update.zip except for the Meta-inf or "updater script" file/folder then place your modified build.prop file in the update.zip so that it is the only thing in the zip other than the Meta-inf/updater script. Then put it on external sdcard, insert it into your device and boot into stock recovery then choose the option that lets you install updates from sdcard and try flashing your modified update.zip file and reboot the device, if it works, it will enable USB debugging. The next obstacle is getting past your lock screen, which is pointless if the device reboots in seconds. If you can get it to stop rebooting, you might be able to use adb to unlock the lock screen by using adb commands that simulate the touch input required to unlock the screen. You'll have to do some searching to find out the "address" and order of each part of the screen that you need to simulate the touch input on the screen in the right order. It's a bit complicated for those that aren't familiar but it can be done if you do the research.
Or,you can try connecting a USB mouse to the device and see if it will let you open the lock screen.
Click to expand...
Click to collapse
Droidriven said:
Can you find a stock update for your specific model number in the form ol stock update.zip that can be flashed in your stock recovery like a OTA update? If so, you might be able to extract the build.prop file from the update then open the build.prop file in a note editor and edit the file by adding or editing lines that enable USB debugging. Then save the file. Then remove everything from the update.zip except for the Meta-inf or "updater script" file/folder then place your modified build.prop file in the update.zip so that it is the only thing in the zip other than the Meta-inf/updater script. Then put it on external sdcard, insert it into your device and boot into stock recovery then choose the option that lets you install updates from sdcard and try flashing your modified update.zip file and reboot the device, if it works, it will enable USB debugging. The next obstacle is getting past your lock screen, which is pointless if the device reboots in seconds. If you can get it to stop rebooting, you might be able to use adb to unlock the lock screen by using adb commands that simulate the touch input required to unlock the screen. You'll have to do some searching to find out the "address" and order of each part of the screen that you need to simulate the touch input on the screen in the right order. It's a bit complicated for those that aren't familiar but it can be done if you do the research.
Or,you can try connecting a USB mouse to the device and see if it will let you open the lock screen.
Click to expand...
Click to collapse
The procedure looks good, I'd give it a try but is there any alternative to the SD card? Cause my phone has no SD slot available. Maybe an external usb card reader to plug into the phone?
Droidriven said:
Can you find a stock update for your specific model number in the form ol stock update.zip that can be flashed in your stock recovery like a OTA update? If so, you might be able to extract the build.prop file from the update then open the build.prop file in a note editor and edit the file by adding or editing lines that enable USB debugging. Then save the file. Then remove everything from the update.zip except for the Meta-inf or "updater script" file/folder then place your modified build.prop file in the update.zip so that it is the only thing in the zip other than the Meta-inf/updater script. Then put it on external sdcard, insert it into your device and boot into stock recovery then choose the option that lets you install updates from sdcard and try flashing your modified update.zip file and reboot the device, if it works, it will enable USB debugging. The next obstacle is getting past your lock screen, which is pointless if the device reboots in seconds. If you can get it to stop rebooting, you might be able to use adb to unlock the lock screen by using adb commands that simulate the touch input required to unlock the screen. You'll have to do some searching to find out the "address" and order of each part of the screen that you need to simulate the touch input on the screen in the right order. It's a bit complicated for those that aren't familiar but it can be done if you do the research.
Or,you can try connecting a USB mouse to the device and see if it will let you open the lock screen.
Click to expand...
Click to collapse
Plus, I don't really get why the system fails right after the lockscreen, I'm actually able to enter the code and the phone unlocks but the launcher seems not working, while the notifications bar works fine, and after some seconds the phone reboots. How can the system work fine in some aspects and bad in others at the same time? Can it be some flash memory issue?
Dona2592 said:
The procedure looks good, I'd give it a try but is there any alternative to the SD card? Cause my phone has no SD slot available. Maybe an external usb card reader to plug into the phone?
Click to expand...
Click to collapse
Yes USB should work in place of sdcard
Dona2592 said:
Plus, I don't really get why the system fails right after the lockscreen, I'm actually able to enter the code and the phone unlocks but the launcher seems not working, while the notifications bar works fine, and after some seconds the phone reboots. How can the system work fine in some aspects and bad in others at the same time? Can it be some flash memory issue?
Click to expand...
Click to collapse
That or kernel panic due to some other important hardware is damaged.
Maybe you can use a adb script to interrupt the running processes right after the device unlocks. Something to stop everything from loading beyond screen unlock. It might allow you to use adb to pull whatever you want from the device via adb pull commands.
Or, if there is a custom recovery for your device and if your bootloader is already unlocked(if it isn', don't unlock it, it will wipe your data), you can install the custom recovery and use it to create a backup of your data then extract your data from the backup.
Droidriven said:
That or kernel panic due to some other important hardware is damaged.
Maybe you can use a adb script to interrupt the running processes right after the device unlocks. Something to stop everything from loading beyond screen unlock. It might allow you to use adb to pull whatever you want from the device via adb pull commands.
Or, if there is a custom recovery for your device and if your bootloader is already unlocked(if it isn', don't unlock it, it will wipe your data), you can install the custom recovery and use it to create a backup of your data then extract your data from the backup.
Click to expand...
Click to collapse
Unfortunately I still have the stock recovery. Plus USB debug is deactivated. What really boggles me is the fact that I can still enter settings and get to developer options, turn ON the toggle of USB debug, but it's like the phone doesn't save the setting, cause if I go back to the main setting screen and enter again developer options, USB debug is OFF. I mean, what the hell?
Having access to device's Stock Recovery you can try as shown below to enable ADB / USB Debug ging: yes you can run Android shell commands from within Android's Stock Recovery.
Unplug device's USB-connection , boot into recovery mode. Having successfully booted into recovery mode, connect device via USB-cable with computer - what switches the USB driver to ADB mode.
Now enable USB debugging via recovery:
Code:
adb shell
echo "persist.service.adb.enable=1" >> /system/build.prop
echo "persist.service.debuggable=1" >> /system/build.prop
echo "persist.sys.usb.config=adb,mtp" >> /system/build.prop"
reboot
Dona2592 said:
Unfortunately I still have the stock recovery. Plus USB debug is deactivated. What really boggles me is the fact that I can still enter settings and get to developer options, turn ON the toggle of USB debug, but it's like the phone doesn't save the setting, cause if I go back to the main setting screen and enter again developer options, USB debug is OFF. I mean, what the hell?
Click to expand...
Click to collapse
Hardware damaged. You're going to have to repair the hardware or forget about retrieving your data, unless you can find a reputable shop that has the equipment and experience to pull your data directly from the chip itself.
xXx yYy said:
Having access to device's Stock Recovery you can try as shown below to enable ADB / USB Debug ging: yes you can run Android shell commands from within Android's Stock Recovery.
Unplug device's USB-connection , boot into recovery mode. Having successfully booted into recovery mode, connect device via USB-cable with computer - what switches the USB driver to ADB mode.
Now enable USB debugging via recovery:
Code:
adb shell
echo "persist.service.adb.enable=1" >> /system/build.prop
echo "persist.service.debuggable=1" >> /system/build.prop
echo "persist.sys.usb.config=adb,mtp" >> /system/build.prop"
reboot
Click to expand...
Click to collapse
Thanks mate, I'll give it a try for sure
Droidriven said:
Hardware damaged. You're going to have to repair the hardware or forget about retrieving your data, unless you can find a reputable shop that has the equipment and experience to pull your data directly from the chip itself.
Click to expand...
Click to collapse
Ok, but do you know what could be the damaged piece of hardware?
Dona2592 said:
Ok, but do you know what could be the damaged piece of hardware?
Click to expand...
Click to collapse
NO
xXx yYy said:
Having access to device's Stock Recovery you can try as shown below to enable ADB / USB Debug ging: yes you can run Android shell commands from within Android's Stock Recovery.
Unplug device's USB-connection , boot into recovery mode. Having successfully booted into recovery mode, connect device via USB-cable with computer - what switches the USB driver to ADB mode.
Now enable USB debugging via recovery:
Code:
adb shell
echo "persist.service.adb.enable=1" >> /system/build.prop
echo "persist.service.debuggable=1" >> /system/build.prop
echo "persist.sys.usb.config=adb,mtp" >> /system/build.prop"
reboot
Click to expand...
Click to collapse
That might work but I've never had any luck with adb in stock recovery, not on the devices that I've owned, at least.
Dona2592 said:
Hello everyone,
my phone (Xiaomi MI 9T) has fallen in the water and now it's partially working.
I really need to recover some data from it, but any method I've found on the internet requires USB Debug active. The phone turns on but it works only as long as it stays on the lock screen or if I go to settings from the notification bar. If I unlock it, the launcher doesn't work (but I can still drag down the notification's bar) and after few seconds the phone reboots I'm also able to activate the toggle of the USB Debug but it looks like it doesn't stay active because if I go back and re-enter developer's section, USB Debug is OFF.
At this point I don't really know what to do. The phone enters fastboot and recovery mode, unfortunately everything is stock, so my possibilities are limited.
I haven't tried to change the screen, but I doubt that would solve the problem, since if I stay in those specific areas, it works fine.
Android version: 10
MIUI 12
Thank you
Click to expand...
Click to collapse
Is your bootloader locked?
Droidriven said:
That might work but I've never had any luck with adb in stock recovery, not on the devices that I've owned, at least.
Click to expand...
Click to collapse
Yeah in fact when I type "adb shell" it gives me error, but I can enter fastboot mode and the phone is seen. Unfortunately I can't do much from there
Arealhooman said:
Is your bootloader locked?
Click to expand...
Click to collapse
Yeah. **** me, for once I kept everything stock and this happened . I've always rooted and customized my phones and nothing like this has ever happened.