Database Info

DOOGEE S70 Lite - Root Method done - Searching for Custom Recovery

Hi there,
I am one of the lucky DOOGEE S70 Lite owners and I want to start a move in developing the typical things like root (done) and TWRP and other tweaks.
In the end, my goal is to modify the system files to make my phone auto booting when a charger is plugged in (done). It shall be my navigation device for my motorcycle.
However I think many others of you may can make use of root privileges (done) or a nice custom recovery for this device. So I'm starting this thread to collect information, give status updates and forcing the development.
So let's start and see what we can do together.
So what do we have?
Status
Bootloader
Bootloader is locked on this phone by default.
There is an instruction to unlock it:
https://gearallnews.com/how-to-unlock-the-bootloader-of-doogee-s70-liteguide/
(gearallnews.com)
Note that there is an option in the Android "Developer Options" to configure Android shall not try to relock Bootloader and reset the change.
For me it worked and it seems that my bootloader was permanently unlocked. You see a warning on bootscreen.
Stock ROM
Stock ROM is available on the internet (Doogee S70 Lite_factory_MT6763T_8.1). Including all tools that are needed to download (flash) it to the phone. A scatter file is included for SP Flash Tool.
This should also help to unbrick the phone if needed.
https://www.getdroidtips.com/stock-rom-doogee-s70-lite-firmware/
(getdroidtips.com)
Tools
SP Flash Tool:
This tool can be used to download (flash) and readback (backup) the whole phone image. Scatter File can be used from the Stock ROM.
https://www.getdroidtips.com/download-smartphone-flash-tool/
(getdroidtips.com)
MTK Droid Tools
This tool is used to create scatter files and to build custom recovery images.
I was able to install and connect the tool but currently it is not working properly. See reply threads.
https://androidmtk.com/download-mtk-droid-tool
(androidmtk.com)
Root
Root can be installed with Magisk Manager.
See https://forum.xda-developers.com/showpost.php?p=79137797&postcount=5 for instuction.
Custom Recovery / CWMR / TWRP
Currently no custom recovery
Auto Boot on power / charger / USB connect
Enter the following commands in a connected ADB console:
Code:
adb reboot bootloader
fastboot oem off-mode-charge 0
fastboot reboot
Other Information
Enabling USB Debugging works as normal.
Relevant Specs
MediaTek Helio P23 (MT6763T)
2300 MHz Octa-core
ARM Mali-G71 MP2 770 MHz
RAM 4 GB
Screen 1080 x 2160 pixels, 403 ppi, 158 ppcm
Android 8.1 Oreo
I will update this first thread if we make progress.
Hope, many of you can help.

Flashtool
First step... Flashtool...
I installed all types of driver I was able to find.
Note that Win10 has to be started without the driver signation checks.
https://www.maketecheasier.com/install-unsigned-drivers-windows10/
And don't forget to run as admin.
Afterwards I was able to use SP Flash Tool to load scatter file of the downloaded Stock ROM.
Then I wrote down the end address until the cache/user data begins.
Then I used the readback function to dump my current image.
This was no problem.
Here some additional information:
https://www.getdroidtips.com/backup-restore-imei-nvram-data-mediatek/
So I am able to backup the current firmware and I guess flashing the stock ROM would also work.

Recovery
Next step... Recovery...
There are several instructions how to create custom recoveries for a MTK Device:
https://forum.xda-developers.com/showthread.php?t=2519432
https://www.youtube.com/watch?v=s66e-kwvKUU&t=1s
and so on
I took the latest version of MKT Droid Tools and was able to connect to the phone.
Hardware, Model, Build number, Build date UTC, Android v, Baseband v, Kernel v
All those fields were shown.
Uboot build v, LCD Driver IC, IMEI 1 and 2 were not shown...
And I had the following errors:
Code:
--->>> Connect to device <<<---
--- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
--- Unknown ROM structure, backup NOT possible!
ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
on the tab "root, backup, recovery"...
The button "To process file ROM_ from FlashTool" is locked.
So I'm stuck here...
Maybe I need an other version of MKT Droid Tools?
Or is it possible to use the scatter file somehow to fix this?
I have a dump of my original recovery and I have the scatter with the start and end addresses. Somehow it should be possible to generate a recovery image, isn't it?

I managed to make the phone auto booting when a charger or usb is connected.
That's handy if are like me and wanting to use this phone as a navigation device on the motor cycle.
Here is what I did:
Enable USB Debugging.
Connect Phone with your PC.
Open up a console in your adb directory.
Execute:
Code:
adb reboot bootloader
fastboot oem off-mode-charge 0
fastboot reboot

I just managed to root the device.
Magisk does the job!
Inspired by https://www.youtube.com/watch?v=sATW0cPT_uQ
* I took the "boot.img" file from the image download.
* Placed it on the phone.
* Opened up Magisk Manager.
* "Install" -> "Patch Boot Image File" -> select "boot.img"
* Wait until done.
* Copy the "patched_boot.img" to your PC.
* Open SP Flash Tool and select scatter file (from downloaded image)
* Uncheck all partitions except "boot".
* Update file for "boot" partition with the "patched_boot.img".
* "Download" and plugin phone.
* Flash should be done in seconds.
* Uplug and boot the phone.
* You should have root now managed by Magisk Manager

Have you manage to get a working recovery ?

Beda974 said:
Have you manage to get a working recovery ?
Click to expand...
Click to collapse
No.
But currently I don't see an urgent need for a custom recovery.
Image backups can be done with SP Flash Tool over USB.
And there is a working root method with Magisk Manager.
And it seems that there are not many others that are interested in developing for this device. So my effort in writing down these whole things seems to be useless. You are the first poster here.

Yep I have manage to Root my device with magisk but I want to flash some zip files.
I tried with flashfire, flashify ans rashr but none of thoses work.

GSIs work and you don't need to unlock the bootloader
Hey guys, so apparently you can flash stuff in spflashtool without unlocking the bootloader! Most arm64 a-only GSIs work, thanks to these devices being treble compatible. It will usually fail to boot the 1st time, then ask to factory reset. You NEED the scatter file. I took a screenshot of my phone with the magisk patched-boot.img in the slot. BTW I have the Doogee s70 (not lite), but it should work given that you only need your device's scatter file to backup and flash stuff.
Now we need to figure out how to get gapps on without a custom recovery

I have found a twrp recovery that works.
I just wanted to let everyone know that I found a twrp compatible recovery it's unofficial though so flash at your own risk. I used a unofficial one from the doogee s80 which is actually a twrp recovery from ulefone power 5 by Geo geo. It has the usual encryption bugs and can't flash system images so you will have to flash system images with fastboot or sptools. Also this device is somewhat project treble compatible I am currently running phhussons Android 9.0 asop gsi image on my s70 lite it took a combo of using the twrp recovery and fastboot to make it happen and I had to flash stock firmware on my device a couple times from incompatibility issues and making mistakes. The only bug or issue with the project treble Android 9.0 asop arm64gapps-A-su.img I've seen is mtk engineering mode won't open can send and recieve texts have 4g data can call and my imei number is fine. The reason I flashed the phhussons Andoid 9.0 asop is because one of the compatible phones they have listed is the blackview BV9500 pro this phone shares alot of the same hardware specs with the doogee s70 lite I flashed other project treble gsi images and had to many bugs to consider using them as a daily driver.

TWRP for doogee s70
https://4pda.ru/pages/go/?u=https%3A%2F%2Fyadi.sk%2Fd%2FO-OjCdbyDl_Lww&e=84420395

Help..
Hi, can someone help me? I need to install unoficial linageos 15.1 on my doogee s70 lite ARM64 processor...
Anyone knows what version should i install. Doogee isn't in the compatibility list.
Thanks

lucaspc82 said:
Hi, can someone help me? I need to install unoficial linageos 15.1 on my doogee s70 lite ARM64 processor...
Anyone knows what version should i install. Doogee isn't in the compatibility list.
Thanks
Click to expand...
Click to collapse
U can flash all Treble ROM ; Image for ARM64 A-only device
Unlock Bootloader ( fastboot oem unlock)
Erase system (fastboot erase system)
Install System (fastboot -u flash system name_of_system.img)

Beda974 said:
U can flash all Treble ROM ; Image for ARM64 A-only device
Unlock Bootloader ( fastboot oem unlock)
Erase system (fastboot erase system)
Install System (fastboot -u flash system name_of_system.img)
Click to expand...
Click to collapse
I needed to make work miracast. Finally i sold out the phone and bought an Ulefone Armor 6E. Thanks

Is there a beginner friendly way to root the S70?

doogee s70
Beda974 said:
U can flash all Treble ROM ; Image for ARM64 A-only device
Unlock Bootloader ( fastboot oem unlock)
Erase system (fastboot erase system)
Install System (fastboot -u flash system name_of_system.img)
Click to expand...
Click to collapse
Здравствуйте,я вижу что вы разработчик и хорошо в этом разбираетесь ,я к вам с просьбой и советом ,у меня смартфон doogee s70 ,android 8.1.0 MTK (MT6767T) ,TWRP ,Magisk + root ,это всё я уже установил ,а вот в чем вопрос: как и где мне можно взять прошивку android 10 Q на мой девайс, ???,заранее благодарю !!
---------- Post added at 10:11 PM ---------- Previous post was at 10:03 PM ----------
Beda974 said:
U can flash all Treble ROM ; Image for ARM64 A-only device
Unlock Bootloader ( fastboot oem unlock)
Erase system (fastboot erase system)
Install System (fastboot -u flash system name_of_system.img)
Click to expand...
Click to collapse
Я видел на сайте разработчиков android 10 ARM64 A-only ,его можно прошить на doogee s70 ,объясните пожалуйста !!

Buenas noches amigos me gustaría saber si se puede instalar Android 10 en mi Doogee s70lite

TWRP and Root

Samsung galaxy A01 (A015F) How to install TWRP and unlock bootloader?

1. Unlock your bootloader enter in download mode Vol+ + Vol- + USB conected to pc (Keep in mind that by doing this you will lose your files, it is advisable to make a backup of your photos, music, etc.)
2. Once you start your cell phone install magisk manager, Choosing the boot.img file of your rom into the app (Tip: Only!!! If your model is SM-A015M Android 11 I leave you my own modified boot.img to flash:
File on MEGA
mega.nz
Otherwise, you can download the firmware (3.79 gb) and extract the boot.img from the firmware of your model SM-A015 M / F ... Android 10, Android 11... etc. And No need for pc
https://samfrew.com/model/SM-A015M/
3. The image will begin to flash
4. When it restarts you will have Root on the cell phone!
------------------------------------------------------------------------------------------------------------------------------------------------
Extra: If you need the custom recovery I give you the link with my TWRP which is installed through the Odin program on a PC (this step does not delete your files)
File on MEGA
mega.nz
Keep in mind that to install TWRP you must deactivate the DM-VERITY & FORCEENCRYPT DISABLER I leave it in a link:
Zackptg5 - Android
zackptg5.com
This is a module that can be installed via magisk, which is necessary to decrypt the system ... so once TWRP is installed, it is advisable to uninstall it via Magisk to avoid R / W errors

Tell me please, without pu it is impossible to flash the phone at all?
Подскажите пожалуйста, без пу прошить телефон вообще нельзя получается?

How to install viper on your Beloved umi/cmi and root needed

First of all you need an umi or cmi with rooted permission..... NEED MAGISK for viper installation... Warning I'm not responsible for brick and bootloops .. All the things about viper and modules been tested by me and our members from official mi10 group
I have attached the APK of viper ... Just install it if you have MAGISK installed... After installing the APK just open it and grand permission for root access then reboot your phone... And you're good to go... Once you've installed and rebooted successfully .. Make sure to check properties in the app to check the drivers installed properly.
..- Support Magisk 20.3
- Add feature descriptions (long press effect to show)
- Theme updates
- Support scoped storage
Release note: Starting from Android 10, external files used by V4A (presets, vdc and irs files) must now be placed in /storage/emulated/0/Android/data/com.pittvandewitt.viperfx/files/ instead of /ViPER4Android. The folder structure stays the same

Not working [emoji36]
When installing driver it says: "Installation aborted on patching system"
Отправлено с моего Mi 10 через Tapatalk

R0iZ said:
Not working [emoji36]
When installing driver it says: "Installation aborted on patching system"View attachment 5112877View attachment 5112879
Отправлено с моего Mi 10 через Tapatalk
Click to expand...
Click to collapse
Working for me

I forgot to clarify that I have Android 11[emoji17]
Отправлено с моего Mi 10 через Tapatalk

no need to install sound library module in magisk before, install drivers in V4A?

iHusky said:
no need to install sound library module in magisk before, install drivers in V4A?
Click to expand...
Click to collapse
No need to just install as normal APK then open and it will prompt or your phone will restart automatically then viola good to go

Where can I get Viper, I do not see the link.

Zeblaze Thor 6 ROOT

Settings
About watch
Build number
Click on the build number
Developer options enabled
Back
System
Developer options
OEM unlocking
USB debugging
Open Minimal ADB and Fastboot folder
Paste the boot.img and vbmeta.img files inside the Minimal ADB and Fastboot folder
Zeblaze Thor 6 V1.3 ROOT
Thor 6 root.zip
drive.google.com
Zeblaze Thor 6 V1.4 ROOT
boot
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Minimal ADB Fastboot v1.4.3
Minimal ADB Fastboot v1.4.3
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Open Minimal ADB and Fastboot
commands
adb reboot bootloader
fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot reboot
You can open Magisk.
Note: The watch will be reset after the procedure. Please don't forget to take your backups.

how to root thor 5 pro ? :/ was looking so bad for that , i have the rom but can't patch the boot with magisk on the watch , any solution ?

mhd 12 said:
how to root thor 5 pro ? :/ was looking so bad for that , i have the rom but can't patch the boot with magisk on the watch , any solution ?
Click to expand...
Click to collapse
Every setup poses a problem. I need to have the watch to know how to overcome problems. I do not have Zeblaze Thor 5 pro. So I can't say anything for sure. Share the stock rom please. Your watch can be hard brick. What solutions have you tried?

AYALTUN said:
Every setup poses a problem. I need to have the watch to know how to overcome problems. I do not have Zeblaze Thor 5 pro. So I can't say anything for sure. Share the stock rom please. Your watch can be hard brick. What solutions have you tried?
Click to expand...
Click to collapse
no no the watch is working fine except there isn't a patched img of boot i found , i got the stock rom and everything , installed magisk on the watch tried to patch the boot img but i couldn't because the file manager will not detect any file in img format.. so i was kind of stuck how to find a patched boot img to flash

mhd 12 said:
no no the watch is working fine except there isn't a patched img of boot i found , i got the stock rom and everything , installed magisk on the watch tried to patch the boot img but i couldn't because the file manager will not detect any file in img format.. so i was kind of stuck how to find a patched boot img to flash
Click to expand...
Click to collapse
Use your phone to patch boot.img. You do not need to use your watch for this process. After getting the patched boot.img install it on your watch with fastboot. If you still have problems, upload the boot.img file. I will not patch the boot.img file for you.

AYALTUN said:
Use your phone to patch boot.img. You do not need to use your watch for this process. After getting the patched boot.img install it on your watch with fastboot. If you still have problems, upload the boot.img file. I will not patch the boot.img file for you.
Click to expand...
Click to collapse
Hocam selamlar,
Daha önce Türkçe yorumlarınızı gördüm ve sanırım Türksünüz. Zeblaze Thor 6 almayı düşünüyorum fakat çok kararsızım çünkü Zeblaze markası kafamı kurcalıyor. Saat hakkında neler söyleyebilirsiniz, almalı mıyım?

tunaykr said:
Hocam selamlar,
Daha önce Türkçe yorumlarınızı gördüm ve sanırım Türksünüz. Zeblaze Thor 6 almayı düşünüyorum fakat çok kararsızım çünkü Zeblaze markası kafamı kurcalıyor. Saat hakkında neler söyleyebilirsiniz, almalı mıyım?
Click to expand...
Click to collapse
Öncelikle bu saat aslında bir akıllı telefon. Saat görünümlü bir telefon diyebiliriz. Yani bu saati bluetooth ile telefona sekronize edeyim kullanayım diyorsam bu bir hata olur. Çünkü bu şekilde şarjı en fazla 3 gün gider. 15-30 gün şarının gitmesini bekleme. Bu saaati alacaksan eğer ona bir hat takacaksın ve telefonun gibi 2 günde bir şarj edeceksin. Bunu bir akıllı saat yada bileklik gibi düşünme. İnternette yeteri kadar tanıtım videosu izlediğini ve özelleklerini bildiğine eminim. Bu yüzden sana saatin özellikleri ve tanıtımını yapmayacağım. Ama internetteki ürün inceleme videolarında bulamayacağın bazı durumları anlatayım. Senin için böylesi daha iyi olur. Öncelikle Zeblaze markası kalite olarak fena değil. Zeblaze Thor 6'ya gelecek olursak, daha önce Zeblaze Thor 3G kullandım. Zeblaze Thor 6 ekran parlaklığı biraz düşük. Zeblaze Thor 3G bu konuda çok iyiydi. Zeblaze Thor 6 biraz büyük bir saat ve biraz kaba vede su geçiriyor. Kameraları iyi değil. Olumsuz özellikleri bunlar. Performans ve diğer özellikleri bakımından gayet iyi. Android olmayan akıllı saatler, Zeblaze Thor 6 yanında oyuncak gibi kalıyor. Zeblaze Thor 3G'yi ilk aldığımda görenlerin ağzı açık kalıyordu.

AYALTUN said:
Öncelikle bu saat aslında bir akıllı telefon. Saat görünümlü bir telefon diyebiliriz. Yani bu saati bluetooth ile telefona sekronize edeyim kullanayım diyorsam bu bir hata olur. Çünkü bu şekilde şarjı en fazla 3 gün gider. 15-30 gün şarının gitmesini bekleme. Bu saaati alacaksan eğer ona bir hat takacaksın ve telefonun gibi 2 günde bir şarj edeceksin. Bunu bir akıllı saat yada bileklik gibi düşünme. İnternette yeteri kadar tanıtım videosu izlediğini ve özelleklerini bildiğine eminim. Bu yüzden sana saatin özellikleri ve tanıtımını yapmayacağım. Ama internetteki ürün inceleme videolarında bulamayacağın bazı durumları anlatayım. Senin için böylesi daha iyi olur. Öncelikle Zeblaze markası kalite olarak fena değil. Zeblaze Thor 6'ya gelecek olursak, daha önce Zeblaze Thor 3G kullandım. Zeblaze Thor 6 ekran parlaklığı biraz düşük. Zeblaze Thor 3G bu konuda çok iyiydi. Zeblaze Thor 6 biraz büyük bir saat ve biraz kaba vede su geçiriyor. Kameraları iyi değil. Olumsuz özellikleri bunlar. Performans ve diğer özellikleri bakımından gayet iyi. Android olmayan akıllı saatler, Zeblaze Thor 6 yanında oyuncak gibi kalıyor. Zeblaze Thor 3G'yi ilk aldığımda görenlerin ağzı açık kalıyordu.
Click to expand...
Click to collapse
Çok teşekkür ederim. Aklımda takılan birkaç ufak soru işareti var. Birisi şarjı tabii ki de. Normal kullanımda 2 gün dayanıyorsa çok iyi. Bir diğeri de yağmurlu havada vs. su geçiriyor mu yoksa sadece duş ve yüzme gibi durumlarda mı sıkıntı yaratır?
Google Play'den indirilen uygulamalarda hiç sıkıntı yaşadığınız oldu mu ve titiz bir kullanımda bu saat tahmini kaç sene götürür?
Biraz çok soru sordum kusura bakmayın, saati alma arifesindeyim de. Son olarak da Thor 6'yı önerir misiniz yoksa belirttiğiniz sıkıntılardan dolayı bunu alma Thor 7'yi bekle mi dersiniz?

tunaykr said:
Çok teşekkür ederim. Aklımda takılan birkaç ufak soru işareti var. Birisi şarjı tabii ki de. Normal kullanımda 2 gün dayanıyorsa çok iyi. Bir diğeri de yağmurlu havada vs. su geçiriyor mu yoksa sadece duş ve yüzme gibi durumlarda mı sıkıntı yaratır?
Google Play'den indirilen uygulamalarda hiç sıkıntı yaşadığınız oldu mu ve titiz bir kullanımda bu saat tahmini kaç sene götürür?
Biraz çok soru sordum kusura bakmayın, saati alma arifesindeyim de. Son olarak da Thor 6'yı önerir misiniz yoksa belirttiğiniz sıkıntılardan dolayı bunu alma Thor 7'yi bekle mi dersiniz?
Click to expand...
Click to collapse
Yamurlu havalarda su geçirir mi bilemem, hiç denemedim. Fakat saatin alt kapağını sökünce alt kapakta jonta olduğunu gördüm. Google play uygulamarı ile ilgili bir sıkıntı yaşamadım. Fakat dairesel ekran yerine kare ekran seçince, ekrana sığaması gereken menü tam tersi bir şekilde ekrana sıçmadı. Bu da nadiren oldu. Bu saatin 2-3 yıl götüreceğini düşünüyorum. Thor 7 çıksa mevcut sıkıntıları giderilmiş bir şekilde mi çıkar bilemeyiz.

AYALTUN said:
Use your phone to patch boot.img. You do not need to use your watch for this process. After getting the patched boot.img install it on your watch with fastboot. If you still have problems, upload the boot.img file. I will not patch the boot.img file for you.
Click to expand...
Click to collapse
hhhhh the thing is my phone is iphone :’) is there any other way ?!

AYALTUN said:
Use your phone to patch boot.img. You do not need to use your watch for this process. After getting the patched boot.img install it on your watch with fastboot. If you still have problems, upload the boot.img file. I will not patch the boot.img file for you.
Click to expand...
Click to collapse
tbh i was using it for quiet months , found out it’s a good way to use it instead of a second android phone bcz after all i love open sources systemes not like ios that is too closed even with jealbreak, but in some cases i think it’s better to have an actual android phone , this watch need a moded soft , may be hovac os ported to it would be great

mhd 12 said:
hhhhh the thing is my phone is iphone :’) is there any other way ?!
Click to expand...
Click to collapse
I will patch the boot.img file for you. Send the boot.img file to me. I've said this before. Now I realized that I had mistyped before. Sorry.

AYALTUN said:
Settings
About watch
Build number
Click on the build number
Developer options enabled
Back
System
Developer options
OEM unlocking
USB debugging
Open Minimal ADB and Fastboot folder
Paste the boot.img and vbmeta.img files inside the Minimal ADB and Fastboot folder
Thor 6 root.zip
drive.google.com
Open Minimal ADB and Fastboot
commands
adb reboot bootloader
fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot reboot
You can open Magisk.
Note: The watch will be reset after the procedure. Please don't forget to take your backups.
Zeblaze Thor 6 Stock ROM coming soon (SP flash tool version).
Click to expand...
Click to collapse
Whenever i hit the second command, the command prompts as waiting device for too long. Is there any video tutorial regarding this.. I searched on youtube but could not find it. And also got confused on the third command because i am a noobie..please help

AYALTUN said:
Settings
About watch
Build number
Click on the build number
Developer options enabled
Back
System
Developer options
OEM unlocking
USB debugging
Open Minimal ADB and Fastboot folder
Paste the boot.img and vbmeta.img files inside the Minimal ADB and Fastboot folder
Thor 6 root.zip
drive.google.com
Open Minimal ADB and Fastboot
commands
adb reboot bootloader
fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot reboot
You can open Magisk.
Note: The watch will be reset after the procedure. Please don't forget to take your backups.
Zeblaze Thor 6 Stock ROM coming soon (SP flash tool version)just download the bugjaeggar app, download vbmetadisabled.img and magiskpatchedboot.img...hit it from the bugjaeggar
Click to expand...
Click to collapse
V
AYALTUN said:
Settings
About watch
Build number
Click on the build number
Developer options enabled
Back
System
Developer options
OEM unlocking
USB debugging
Open Minimal ADB and Fastboot folder
Paste the boot.img and vbmeta.img files inside the Minimal ADB and Fastboot folder
Thor 6 root.zip
drive.google.com
Open Minimal ADB and Fastboot
commands
adb reboot bootloader
fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot reboot
You can open Magisk.
Note: The watch will be reset after the procedure. Please don't forget to take your backups.
Zeblaze Thor 6 Stock ROM coming soon (SP flash tool version).
Click to expand...
Click to collapse
AYALTUN said:
Settings
About watch
Build number
Click on the build number
Developer options enabled
Back
System
Developer options
OEM unlocking
USB debugging
Open Minimal ADB and Fastboot folder
Paste the boot.img and vbmeta.img files inside the Minimal ADB and Fastboot folder
Thor 6 root.zip
drive.google.com
Open Minimal ADB and Fastboot
commands
adb reboot bootloader
fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot reboot
You can open Magisk.
Note: The watch will be reset after the procedure. Please don't forget to take your backups.
Zeblaze Thor 6 Stock ROM coming soon (SP flash tool version).
Click to expand...
Click to collapse
thanks to your post. I have flashed zeblaze thor 6 stock rom using spflash tool. After this flashed vbmetadisabled.img and magisk patched boot.img using bugjaeggar...successfully rooted zeblaze thor 6 watching various tutorials..still in confusion regarding how i did.

AYALTUN said:
Settings
About watch
Build number
Click on the build number
Developer options enabled
Back
System
Developer options
OEM unlocking
USB debugging
Open Minimal ADB and Fastboot folder
Paste the boot.img and vbmeta.img files inside the Minimal ADB and Fastboot folder
Thor 6 root.zip
drive.google.com
Open Minimal ADB and Fastboot
commands
adb reboot bootloader
fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot reboot
You can open Magisk.
Note: The watch will be reset after the procedure. Please don't forget to take your backups.
Zeblaze Thor 6 Stock ROM coming soon (SP flash tool version).
Click to expand...
Click to collapse
can you share the stock ROM of this device?

PetiaWarzel said:
can you share the stock ROM of this device?
Click to expand...
Click to collapse
1 week later at the earliest.

dxwolverine said:
Whenever i hit the second command, the command prompts as waiting device for too long. Is there any video tutorial regarding this.. I searched on youtube but could not find it. And also got confused on the third command because i am a noobie..please help
Click to expand...
Click to collapse
My PC is out of order now. I will try to answer as soon as possible. Pls wait.

PetiaWarzel said:
can you share the stock ROM of this device?
Click to expand...
Click to collapse
File on MEGA
mega.nz

dxwolverine said:
File on MEGA
mega.nz
Click to expand...
Click to collapse
Thanks man. This rom version 1.2. I have version 1.3. I will share it very soon.

AYALTUN said:
Спасибо чувак. Это ром версии 1.2. У меня версия 1.3. Я поделюсь этим очень скоро.
Click to expand...
Click to collapse
wait for you, bro

How To Guide [ROOT]ing Xiaomi 12 with Magisk

Sources used: https://www.getdroidtips.com/root-xiaomi-12-and-12-pro/
1. First unlock your bootloader. This thread does not cover this. I suggest you do not try to tamper with the 1week~ time gate you will encounter else it may get longer should you fail.
2. Enable Developer mode and adb from Developer settings again.
3. Download the appropriate Fastboot files for your device. See the About section in your phone's settings to know what you are currently running.
4. Download latest Magisk-vXX.Y.apk and install it on your device. Magisk developer only provides files from Github, do not download it from anywhere else.
5. Extract(Install 7-zip if needed) the fastboot .tgz archive and copy the boot.img from it to your phone's sdcard through adb (or other means):
Code:
adb push cupid_eea_global_images_V13.0.16.0.SLCEUXM_20220408.0000.00_12.0_eea/images/boot.img /sdcard/
6. Open up Magisk on your phone, press Install and use the patch option to navigate to the boot.img you just copied. Select that, next next next.
7. Read the output to see where the patched boot.img got saved. Pull that.
Code:
adb pull /sdcard/Download/magisk_patched-24300_D2K9V.img
8. Reboot phone to fastbootD (rebooting to fastboot (via adb reboot bootloader) should also be fine).
Code:
adb reboot fastboot
9. Flash the modified boot image to both A and B partitions
Code:
fastboot flash boot_a magisk_patched-24300_D2K9V.img
fastboot flash boot_b magisk_patched-24300_D2K9V.img
10. Say your prayers and reboot, your device should now have functional root with Magisk
Code:
fastboot reboot

was anyone able to install viper 4 android in xiaomi 12 or xiaomi 12 pro? it aways ask me to install driver when i open the apk. im using v4a in poco f2 pro with android 12/miui 13 without issues

can any one develop a custom recovery and rom for xiaomi 12? please......

If you are on a custom ROM, for example LOS 19.1 with LOS recovery (and vendor_boot, dtbo and recovery), following step necessary:
fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
Otherwise LOS may not boot, after flashing the patched boot.img.
Happened here yesterday!

ydd0ras said:
If you are on a custom ROM, for example LOS 19.1 with LOS recovery (and vendor_boot, dtbo and recovery), following step necessary:
fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
Otherwise LOS may not boot, after flashing the patched boot.img.
Happened here yesterday!
Click to expand...
Click to collapse
Where did you get LOS for the 12?

Darkstriker said:
Where did you get LOS for the 12?
Click to expand...
Click to collapse
Release LineageOS 19.1 for Xiaomi 2201123G (cupid) · arian-ota/ota
📅 Build date: 2022-06-19 🛡️ Security patch: 2022-06-05 💬 Variant: VANILLA 🗒️ Changelog SHA-256 checksum 4b31804abcd9fc54afb8b89ec2ed2bde3aab49e78065b31bd02321281677c161
github.com

ydd0ras said:
Release LineageOS 19.1 for Xiaomi 2201123G (cupid) · arian-ota/ota
📅 Build date: 2022-06-19 🛡️ Security patch: 2022-06-05 💬 Variant: VANILLA 🗒️ Changelog SHA-256 checksum 4b31804abcd9fc54afb8b89ec2ed2bde3aab49e78065b31bd02321281677c161
github.com
Click to expand...
Click to collapse
Interesting. Care to share a user report. Any noteworthy issues you ran into?

Darkstriker said:
Interesting. Care to share a user report. Any noteworthy issues you ran into?
Click to expand...
Click to collapse
Selinux is still permissive, can't receive Sms, D2W doesn't work. Will be solved soon.i guess. The rest is fine

ydd0ras said:
Selinux is still permissive, can't receive Sms, D2W doesn't work. Will be solved soon.i guess. The rest is fine
Click to expand...
Click to collapse
Hm, so still pretty early. Is there a thread here or a community on telegram or something or is the dev just keeping a low profile? How did you find it?

Darkstriker said:
Hm, so still pretty early. Is there a thread here or a community on telegram or something or is the dev just keeping a low profile? How did you find it?
Click to expand...
Click to collapse
Just search for Xiaomi 12 official on TG. SMS issues seem to solved, D2W works as well.

Can't patch the boot.img of my xiaomi 12 Pro in magisk, shows me an Error.
- Unable to unpack Boot Image
- Installation Failed
someone can help me?

hi all,
i have a xiaomi 12 miui 13.0.18.0(SLCEUXM) android version 12 SKQ1.211006.001 security 2022-05-01
i have unlocked with official software and rooted with magisk 25.1, the root passed without error.
when i check with root checker i have congrats the device is rooted.
but i think it's a partial root, because impossible to change permissions on files on phone storage and the copy/paste files to /system/xbin/ in "root explorer" "ES explorer" "root browser pro" say same thing PERMISSION DENIED (all this soft are checked ON superUser in magisk).
i have change name of magisk and activate Zygisk.
i have try with adb and adb shell to copy/paste and the result is "read only files"
can you help me?

i have try with magisk 24.3 and the same issue

hi, what difference with this differents fastboot?
the blue one appear with the command "adb reboot fastboot" on platform-tools
and the orange one is with vol- + power

geraldine said:
hai, apa bedanya dengan fastboot berbeda ini?
yang biru muncul dengan perintah "adb reboot fastboot" di platform-tools
dan yang oranye dengan vol- + power
Click to expand...
Click to collapse
itu karena MIUInya juga beda

C0rn3j said:
Sumber yang digunakan: https://www.getdroidtips.com/root-xiaomi-12-and-12-pro/
1. Buka kunci bootloader Anda terlebih dahulu. Utas ini tidak mencakup ini. Saya sarankan Anda tidak mencoba mengutak-atik gerbang waktu 1 minggu~ yang akan Anda temui jika tidak, mungkin akan lebih lama jika Anda gagal.
2. Aktifkan mode Pengembang dan adb dari pengaturan Pengembang lagi.
3. Unduh file Fastboot yang sesuai untuk perangkat Anda . Lihat bagian Tentang di pengaturan ponsel Anda untuk mengetahui apa yang sedang Anda jalankan.
4. Unduh Magisk-vXX.Y.apk terbaru dan instal di perangkat Anda. Pengembang Magisk hanya menyediakan file dari Github, tidak mengunduhnya dari tempat lain.
5. Ekstrak (Instal 7-zip jika perlu) arsip fastboot .tgz dan salin boot.img darinya ke kartu sd ponsel Anda melalui adb (atau cara lain):
Code:
adb push cupid_eea_global_images_V13.0.16.0.SLCEUXM_20220408.0000.00_12.0_eea/images/boot.img /sdcard/
6. Buka Magisk di ponsel Anda, tekan Instal dan gunakan opsi patch untuk menavigasi ke boot.img yang baru saja Anda salin. Pilih itu, berikutnya berikutnya berikutnya.
7. Baca output untuk melihat di mana boot.img yang ditambal disimpan. Tarik itu.
Code:
adb pull /sdcard/Download/magisk_patched-24300_D2K9V.img
8. Reboot ponsel ke fastboot.
Code:
adb reboot fastboot
9. Flash image boot yang dimodifikasi ke partisi A dan B
[KODE]fastboot flash boot_a magisk_patched-24300_D2K9V.img
fastboot flash boot_b magisk_patched-24300_D2K9V.img[/CODE]
10. Ucapkan doa Anda dan reboot, perangkat Anda sekarang harus memiliki root fungsional dengan Magisk
Code:
reboot fastboot
Click to expand...
Click to collapse
this method is work, I'm using magisk v25.2, android 12 Miui 13.0.5.0

geraldine said:
hi all,
i have a xiaomi 12 miui 13.0.18.0(SLCEUXM) android version 12 SKQ1.211006.001 security 2022-05-01
i have unlocked with official software and rooted with magisk 25.1, the root passed without error.
when i check with root checker i have congrats the device is rooted.
but i think it's a partial root, because impossible to change permissions on files on phone storage and the copy/paste files to /system/xbin/ in "root explorer" "ES explorer" "root browser pro" say same thing PERMISSION DENIED (all this soft are checked ON superUser in magisk).
i have change name of magisk and activate Zygisk.
i have try with adb and adb shell to copy/paste and the result is "read only files"
can you help me?
Click to expand...
Click to collapse
Hi bro , I had a same question, did you fix it?
I used the MIUI13 from the EU and magisk25.1.

Kolinyoung said:
Hi bro , I had a same question, did you fix it?
I used the MIUI13 from the EU and magisk25.1.
Click to expand...
Click to collapse
Nope impossible for me

We have twrp for this device. Can I flash magisk through twrp to root device ?

hello I changed to linage os and missing reverse wireless charging option