Database Info

Galaxy S5 NEO SM-G903F Rooted by Chainfire

EDIT: For all the mods, roots, custom roms, MM, recoveries or similar things follow this thread by WILMANS2M:
[HOW TO][SM-G903F][26/09-Firmware, Custom Rom, Kernel, Recovery...]
-------------------
The Samsung Galaxy S5 Neo G903F and G903M appears to be rootable with the recent file from https://autoroot.chainfire.eu/
Samsung Galaxy S5 Neo G903F ROOT:
Link: https://download.chainfire.eu/779/CF-Root/CF-Auto-Root/CF-Auto-Root-s5neolte-s5neoltexx-smg903f.zip
Samsung Galaxy S5 Neo G903M ROOT:
Link: https://download.chainfire.eu/780/CF-Root/CF-Auto-Root/CF-Auto-Root-s5neolte-s5neolteub-smg903m.zip
Samsung Galaxy S5 Neo G903W ROOT:
Note: For this version of the phone, use the G903F version of the ROOT. (Above)
It was reported working by user 9vs:
9vs said:
I used the F file and successfully rooted the Canadian S5 NEO G903W.
SuperSU installed and root apps working.
Click to expand...
Click to collapse
This WILL trip KNOX! And you will most probably lose warranty!
Enable "OEM Unlock" in developer settings. Also enable USB debugging in developer settings. Before flashing!
LastStandingDroid said:
If you don't enable OEM unlock you will get a FAP lock and it will end up in failure of flashing
2.nd is to not "relock" the oem unlock since if you might trigger something that tries to boot into a "custom" recovery it will stay on boot loop into a "FAP" binary info on S5 Neo Screen
Click to expand...
Click to collapse
Read the guide below for more detailed instructions.
Solutions to common problems are at the near bottom of this post.
TWRP Recovery and Xposed Framework at the bottom of this post.
Detailed how to guide, thanks to NotGrump903:
Code:
[QUOTE="NotGrump903, post: 0"]I wrote a little guide on how to root Samsung Galaxy S5 Neo SM-G903F with this new CF-Autoroot files.
Should work with SM-G903M too, you just need to download the file for the M variant.
Note that this will trip KNOX to 0x1! You, and only you, are responsible for what you do with your device.
When something goes wrong no one from XDA can held responsible. Do this at your own risk!
First make sure you have the latest Samsung USB drivers.
Then simply follow these steps:
1. Download the CF-Autoroot zip file for your phone from [URL="https://download.chainfire.eu/779/CF-Root/CF-Auto-Root/CF-Auto-Root-s5neolte-s5neoltexx-smg903f.zip"]here for G903F[/URL] or [URL="https://download.chainfire.eu/780/CF-Root/CF-Auto-Root/CF-Auto-Root-s5neolte-s5neolteub-smg903m.zip"]here for G903M[/URL]
2. Extract it to desired location.
3. Enable USB debugging and OEM-Unlock in developer options of S5 Neo.
If you don't know how to do this or what this is,
you should most probably stop right here and leave your phone as it is ;)
4. Open Odin.exe from extracted folder.
5. Power down your phone and boot into download mode by pressing and holding Vol. down + Home + Power.
Confirm by pressing Vol. Up.
6. Connect your phone to your PC and wait for Odin to state "added".
7. Click on AP button and select "CF-Auto-Root-s5neolte-s5neoltexx-smg903f.tar.md5"
8. Wait for Odin to finish binary check, then simply press start and wait.
The phone should restart a few times. When this is done you're rooted!
All props go to [user=631273]@Chainfire[/user] for providing Supersu and CF-Autoroot. He is simply the best![/QUOTE]
[SIZE="1"]-Edited by Neoony, tiny changes to links and formatting.[/SIZE]
Thanks to Chainfire
All credits go to him
--
Hoping to see custom ROMs, so Iam trying to let everybody know that it was rooted by this thread. And to make things clear.
--
G903F XDA Forum User Thread: http://forum.xda-developers.com/galaxy-s5/general/galaxy-s5-neo-sm-g903f-user-thread-t3207909
-----
Common problems and solutions:
Code:
-Titanium backup reporting "Mounting the partition namespace may not work correctly in some platforms" / Unable to copy app, because of "No storage space available"
+Go to superSU settings and disable "Mount namespace separation"
NEW! TWRP Recovery: https://twrp.me/devices/samsunggalaxys5neoexynos.html
NEW! Xposed Framework: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Use these versions with Xposed framework: xposed-v79.0-sdk22-arm-custom-build-by-wanam-20151217.zip / xposed-uninstaller-20151217-arm.zip
"How to" can be found in the above links.
-------------------
EDIT: For all the mods, roots, custom roms, MM, recoveries or similar things follow this thread by WILMANS2M:
[HOW TO][SM-G903F][26/09-Firmware, Custom Rom, Kernel, Recovery...]

Can you please write that you MUST enable OEM unlock to being able to flash these files.
If you don't enable OEM unlock you will get a FAP lock and it will end up in failure of flashing
2.nd is to not "relock" the oem unlock since if you might trigger something that tries to boot into a "custom" recovery it will stay on boot loop into a "FAP" binary info on S5 Neo Screen

I wrote a little guide on how to root Samsung Galaxy S5 Neo SM-G903F with this new CF-Autoroot files. Should work with SM-G903M too, you just need to download the file for the M variant.
Note that this will trip KNOX to 0x1! You, and only you, are responsible for what you do with your device. When something goes wrong no one from XDA can held responsible. Do this at your own risk!
First make sure you have the latest Samsung USB drivers.
Then simply follow these steps:
1. Download the CF-Autoroot zip file for your phone from here.
2. Extract it to desired location.
3. Enable USB debugging and OEM-Unlock in developer options of S5 Neo. If you don't know how to do this or what this is, you'll most probably should stop right here and leave your phone as it is
4. Open Odin.exe from extracted folder.
5. Power down your phone and boot into download mode by pressing and holding Vol. down + Home + Power. Confirm by pressing Vol. Up.
6. Connect your phone to your PC and wait for Odin to state "added".
7. Click on AP button and select "CF-Auto-Root-s5neolte-s5neoltexx-smg903f.tar.md5"
8. Wait for Odin to finish binary check, then simply press start and wait.
The phone should restart a few times. When this is done you're rooted!
All props go to @Chainfire for providing Supersu and CF-Autoroot. He is simply the best!

OP updated.
Thanks for suggestions and all.
LastStandingDroid said:
Can you please write that you MUST enable OEM unlock to being able to flash these files.
If you don't enable OEM unlock you will get a FAP lock and it will end up in failure of flashing
2.nd is to not "relock" the oem unlock since if you might trigger something that tries to boot into a "custom" recovery it will stay on boot loop into a "FAP" binary info on S5 Neo Screen
Click to expand...
Click to collapse
I have disabled OEM unlock after flash of the root.
No problems, with such thing. Its still off.
But good to know there might be a danger.

Neoony said:
OP updated.
Thanks for suggestions and all.
I have disabled OEM unlock after flash of the root.
No problems, with such thing. Its still off.
But good to know there might be a danger.
Click to expand...
Click to collapse
Little back story
How I noticed this
Used root tools and re disabled OEM unlock.
Tested to create a backup with flashfire and it failed and got me stuck on s5 neo with custom recovery binary FAP lock message
Ended up power down phone upon powering up same thing happened booting into stock recovery worked but didn't help not even if I wiped cache or factory reset.
Ended up in restoring whole system to make it work again.
So don't re lock the OEM unlock option it will end up bad if you try to do even if you don't have a custom recovery yet.

Thnx for writing the guide!
Verstuurd vanaf mijn GT-I9301I met Tapatalk

Thank you for the guide. Happy new year to everyone ☺
Sent from my SM-G903F using Tapatalk

G903M DS work?

sachs said:
G903M DS work?
Click to expand...
Click to collapse
According to:
https://autoroot.chainfire.eu/
you have to use another file for G903M. Should work however.

It is called try at your own risk proceed with caution. It isn't ment for your device and might render some stuff useless. Chainfire haven't made one specific for m variant but it might work.
Again you try it with your own risk. Chainfire doesn't being held responsibility for your actions.
Regards
Sent from my SM-G903F using Tapatalk

I thought the question is, that there are 2 variants of G903M, one is with dual sim (DS) one is without. I guess.
And there is root for M variant too.
Just check the OP again. Or chainfire. It was there since F.
EDIT: or the M means DS and thats the difference between those neo variants? Im not sure here xD
EDIT2: Yeah, then I guess all g903M are dual sim. http://www.phonemore.com/compare/ph...mds-vs-samsung-galaxy-s5-neo-sm-g903f/2917321
Then nvm I guess.

Neoony said:
I thought the question is, that there are 2 variants of G903M, one is with dual sim (DS) one is without. I guess.
And there is root for M variant too.
Just check the OP again. Or chainfire. It was there since F.
EDIT: or the M means DS and thats the difference between those neo variants? Im not sure here xD
EDIT2: Yeah, then I guess all g903M are dual sim. http://www.phonemore.com/compare/ph...mds-vs-samsung-galaxy-s5-neo-sm-g903f/2917321
Then nvm I guess.
Click to expand...
Click to collapse
There will never be any logic in thus numbers
Sent from my SM-G903F using Tapatalk

Will ROOTING my SM-G903F allow me to remove Region Lock?
Hi everyone, and first of all thanks for providing this information!
I just got my S5 NEO, and unfortunately found out that it was Region Locked, so I am not able to use it with my local SIM.
My only interest in rooting the device at this time is to remove the region lock.
So naturally, my question is, will rooting actually allow me to do this?
Would really appreciate a clarification on this!
Thanks guys!

nanquan said:
Hi everyone, and first of all thanks for providing this information!
I just got my S5 NEO, and unfortunately found out that it was Region Locked, so I am not able to use it with my local SIM.
My only interest in rooting the device at this time is to remove the region lock.
So naturally, my question is, will rooting actually allow me to do this?
Would really appreciate a clarification on this!
Thanks guys!
Click to expand...
Click to collapse
Depends chainfire made a region unlock tool not sure if it'll work though
Sent from my SM-G903F using Tapatalk

Well, I know there were some files for unlock, flashable by ODIN, way before root. Also lots of users reporting success. It was on gsm hosting forums, but now all I can find is this: http://forum.gsmhosting.com/vbb/f94...laxy-s5-neo-fast-safe-unlockunit-com-1992423/
Maybe they removed it, to sell that service.
But anyway, you can try doing it over https://chimeratool.com/ they got a trial you can use, if you already didnt use it. They should also provide unlock.
But I have no idea if it will work or not, so do it on your own risk. Root shouldnt be needed.
Also dont forget to enable "OEM unlock" and USB Debugging.
But really at your own risk.

Neoony said:
Well, I know there were some files for unlock, flashable by ODIN, way before root. Also lots of users reporting success. It was on gsm hosting forums, but now all I can find is this: http://forum.gsmhosting.com/vbb/f94...laxy-s5-neo-fast-safe-unlockunit-com-1992423/
Maybe they removed it, to sell that service.
But anyway, you can try doing it over https://chimeratool.com/ they got a trial you can use, if you already didnt use it. They should also provide unlock.
But I have no idea if it will work or not, so do it on your own risk. Root shouldnt be needed.
Also dont forget to enable "OEM unlock" and USB Debugging.
But really at your own risk.
Click to expand...
Click to collapse
Why not http://forum.xda-developers.com/showthread.php?t=2470551 if it's region locked ?
Sent from my SM-G903F using Tapatalk

Thanks for the replies guys, but I ended up purchasing an IMEI unlock code for $29 and that did the trick.
Got it from "Unlock Base"... great service and fast delivery in case anyone else is interested!
Good luck to everyone else with this problem!

I've found that "speedhack" apps like "Xmodgames" and "Oozhushou" don't work on my rooted SG5 Neo. Does anyone know how to fix this? I can't find any solution and I barely have any programming knowledge.

Does anyone know if this works on a Canadian SM-G903W (G903WVLU1AOJ9) with Android 5.1.1 ?
Thanks!

nanquan said:
Thanks for the replies guys, but I ended up purchasing an IMEI unlock code for $29 and that did the trick.
Got it from "Unlock Base"... great service and fast delivery in case anyone else is interested!
Good luck to everyone else with this problem!
Click to expand...
Click to collapse
Then it was Sim locked?
Navish123 said:
I've found that "speedhack" apps like "Xmodgames" and "Oozhushou" don't work on my rooted SG5 Neo. Does anyone know how to fix this? I can't find any solution and I barely have any programming knowledge.
Click to expand...
Click to collapse
Hmm does it require busybox?
escape75 said:
Does anyone know if this works on a Canadian SM-G903W (G903WVLU1AOJ9) with Android 5.1.1 ?
Thanks!
Click to expand...
Click to collapse
What you reefer to? The kernel or
Sent from my SM-G903F using Tapatalk

Hard bricking Galaxy S7

I wrote in separate thread 10 days ago.
I got the rooted Galaxy S7 (SM-G930F) which if I try to boot to recovery gives an error: dm-verity verification need to check drk first.
Then following step by step instructions I installed TWRP.
And flashed custom rom SuperMan-Rom V1.6.5
Rom worked fine until I rebooted the device for the first time. Then I got message:
Code:
Custom Binary Blocked By FRP
Maybe I accidentally turned off OEM unlock in Developer settings, but I honestly don't remember I did that.
And after that I got the hard brick. This is confirmed by @CuBz90 in this thread
So my question is:
1. After the Galaxy S7 is rooted/custom recovery is installed, the DRK is damaged and dm-verity verification will fail if stock rom is installed, right?
2. If user accidentally turn off OEM Unlock the device will be hard bricked, right?
Is that two steps one way ultimate bricking?
I'm asking that because I'm thinking of buying new Galaxy S7 to replace the bricked one, but if hard bricking is that easy, than I'm not really sure I will buy it again.

Dude, try to kill him completly ( nothing on screen ) then send him to warranty, you got nothing to lose.

NeoDJW said:
Dude, try to kill him completly ( nothing on screen ) then send him to warranty, you got nothing to lose.
Click to expand...
Click to collapse
It's not possible since I bought it second hand.
Even if I had a warranty, in my country (Serbia) warranty for smartphones doesn't mean much, I think I could write PhD thesis easier than to make seller replace/fix smartphone with warranty

mss1988 said:
I wrote in separate thread 10 days ago.
I got the rooted Galaxy S7 (SM-G930F) which if I try to boot to recovery gives an error: dm-verity verification need to check drk first.
Then following step by step instructions I installed TWRP.
And flashed custom rom SuperMan-Rom V1.6.5
Rom worked fine until I rebooted the device for the first time. Then I got message:
Code:
Custom Binary Blocked By FRP
Maybe I accidentally turned off OEM unlock in Developer settings, but I honestly don't remember I did that.
And after that I got the hard brick. This is confirmed by @CuBz90 in this thread
So my question is:
1. After the Galaxy S7 is rooted/custom recovery is installed, the DRK is damaged and dm-verity verification will fail if stock rom is installed, right?
2. If user accidentally turn off OEM Unlock the device will be hard bricked, right?
Is that two steps one way ultimate bricking?
I'm asking that because I'm thinking of buying new Galaxy S7 to replace the bricked one, but if hard bricking is that easy, than I'm not really sure I will buy it again.
Click to expand...
Click to collapse
Maybe you can find the solution here:
http://androidforums.com/threads/custom-binary-block-by-frp-lock.977734/

Erik1805 said:
Maybe you can find the solution here:
http://androidforums.com/threads/custom-binary-block-by-frp-lock.977734/
Click to expand...
Click to collapse
Thanks but this will not fix my problem.

Have you tried this: http://pangu.in/frp.error.html

Bright.Light said:
Have you tried this: http://pangu.in/frp.error.html
Click to expand...
Click to collapse
No I didn't but the fact is it will not work.
There is currently no way to fix that. The only way would be to unlock FRP by some box, but it isn't released yet.
What I am asking here is true that Galaxy S7 could be hard bricked that easy? By steps I wrote in my first post.

My questions are partially answered in this article
But I still don't understand what's the problem with dm-variety if I flashed stock rom?
Is there are any other parts of the NAND that are not original/signed and that's why dm-verity fails?
If that's the case can they be backed up then reflashed with the Odin if I get into same problem with new phone?
Thanks

@mss1988 Even if you get message as locked because of FRP, just use Smart switch with Emergency recovery mode and you will get the device back to its original state. This works even if the device is rooted or Twrp'd

harshang2007 said:
@mss1988 Even if you get message as locked because of FRP, just use Smart switch with Emergency recovery mode and you will get the device back to its original state. This works even if the device is rooted or Twrp'd
Click to expand...
Click to collapse
Thanks, but Smart Switch Emergency Recovery is basically the same thing as Kies Firmware update. Which I already tried and that didn't fixed my problem.

mss1988 said:
Thanks, but Smart Switch Emergency Recovery is basically the same thing as Kies Firmware update. Which I already tried and that didn't fixed my problem.
Click to expand...
Click to collapse
@mss1988 I have personally faced this issue on Samsung J7 and J5 and later I had to use Smart Switch's Emergency recovery functionality by enter my Serial number and Device Model Number and Successfully finished flashing the stock ROM. Yes, This works.

harshang2007 said:
@mss1988 I have personally faced this issue on Samsung J7 and J5 and later I had to use Smart Switch's Emergency recovery functionality by enter my Serial number and Device Model Number and Successfully finished flashing the stock ROM. Yes, This works.
Click to expand...
Click to collapse
I don't have the phone anymore to confirm or to deny this. But the whole procedure in Kies and Smart Switch is the same. There are other people with the same problem too in this thread too, and they still didn't found the way to unbrick their devices.

mss1988 said:
I wrote in separate thread 10 days ago.
I got the rooted Galaxy S7 (SM-G930F) which if I try to boot to recovery gives an error: dm-verity verification need to check drk first.
Then following step by step instructions I installed TWRP.
And flashed custom rom SuperMan-Rom V1.6.5
Rom worked fine until I rebooted the device for the first time. Then I got message:
Code:
Custom Binary Blocked By FRP
Maybe I accidentally turned off OEM unlock in Developer settings, but I honestly don't remember I did that.
And after that I got the hard brick. This is confirmed by @CuBz90 in this thread
So my question is:
1. After the Galaxy S7 is rooted/custom recovery is installed, the DRK is damaged and dm-verity verification will fail if stock rom is installed, right?
2. If user accidentally turn off OEM Unlock the device will be hard bricked, right?
Is that two steps one way ultimate bricking?
I'm asking that because I'm thinking of buying new Galaxy S7 to replace the bricked one, but if hard bricking is that easy, than I'm not really sure I will buy it again.
Click to expand...
Click to collapse
I went through this procedure: http://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516 which gives a link to downloading the factory binary (of either version). It reinstated my IMEI which had been turned to a string of zeroes. I will say that when you reboot after flashing the factory binary it's pretty different looking so be prepared for that. I then went to Sammobile and downloaded the appropriate stock ROM for my s7 and flashed that with Odin. I flashed TWRP, formatted internal data when given the opportunity, flashed the no-verity-opt-encrypt.zip, and I was able to use my s7 again. At any rate, you might follow the guide at the link I gave you and see if it helps. As always, no guarantee is given or implied. It's just what I did.

Thanks man, but I can't flash the Factory binary, my FRP is unfortunately ON.

E pa brate nemoj se više onda igrati sa telefonom, nije to za svakoga,...
Mod Edit: Please post in English only:
Well, the brothers do not come then play with the phone, it's not for everyone

now phone detect usb ? i mean adb devices

mss1988 said:
I wrote in separate thread 10 days ago.
I got the rooted Galaxy S7 (SM-G930F) which if I try to boot to recovery gives an error: dm-verity verification need to check drk first.
Then following step by step instructions I installed TWRP.
And flashed custom rom SuperMan-Rom V1.6.5
Rom worked fine until I rebooted the device for the first time. Then I got message:
Code:
Custom Binary Blocked By FRP
Maybe I accidentally turned off OEM unlock in Developer settings, but I honestly don't remember I did that.
And after that I got the hard brick. This is confirmed by @CuBz90 in this thread
So my question is:
1. After the Galaxy S7 is rooted/custom recovery is installed, the DRK is damaged and dm-verity verification will fail if stock rom is installed, right?
2. If user accidentally turn off OEM Unlock the device will be hard bricked, right?
Is that two steps one way ultimate bricking?
I'm asking that because I'm thinking of buying new Galaxy S7 to replace the bricked one, but if hard bricking is that easy, than I'm not really sure I will buy it again.
Click to expand...
Click to collapse
wild guess....
Install dm-verity and force encryption disabler
Wipe Cache
install custom kernel

chandarakk said:
now phone detect usb ? i mean adb devices
Click to expand...
Click to collapse
There's no adb/fastboot access from Samsung recovery or Samsung download mode, as far as I know.

Just get your phone into downloadmode and then flash the stock firmware witch you can find on sammobile. I got also this problem, and then everything will be fine ?

did you try use Kies or Smart swticher to factory restore the phone ?
because as far as i know , even FRP is on , you can still flash stock firmware.
and , try local shop to find any place have z3x box or Octopus box .

[Completed] Help changing ROM on Samsung Note 3 SM-N900V from Verizon

I have a Samsung Galaxy Note 3 SM-N900V from Verizon and I have been trying to change it to the DarkLord ROM that is a Modded Mix between Note 7 & Edge ROM.
I at first had problems rooting the phone with Odin (it always failed) so I search and search and found a tool called ArabicTool which took care of it and finally I rooted my phone, after that I tried adding TWRP so I could change the ROM but every time I added the recovery tool I got the message saying that the “System software not authorized by Verizon Wireless has been found on your phone” and then had to do an emergency restoration using Kies3 and the cycle began again with other methods but always the same result.
I would like to know if anyone has a way to change the ROM on a SM-N900V from Verizon, I have seem some guides that claim the process works with the SM-N900V but every time I try to do them I get the message of software not authorized when I install the recovery app TWRP and then I have to do an emergency restore in Kies3.
Please help anyone it would be really appreciated.

anrabaro said:
I have a Samsung Galaxy Note 3 SM-N900V from Verizon and I have been trying to change it to the DarkLord ROM that is a Modded Mix between Note 7 & Edge ROM.
I at first had problems rooting the phone with Odin (it always failed) so I search and search and found a tool called ArabicTool which took care of it and finally I rooted my phone, after that I tried adding TWRP so I could change the ROM but every time I added the recovery tool I got the message saying that the “System software not authorized by Verizon Wireless has been found on your phone” and then had to do an emergency restoration using Kies3 and the cycle began again with other methods but always the same result.
I would like to know if anyone has a way to change the ROM on a SM-N900V from Verizon, I have seem some guides that claim the process works with the SM-N900V but every time I try to do them I get the message of software not authorized when I install the recovery app TWRP and then I have to do an emergency restore in Kies3.
Please help anyone it would be really appreciated.
Click to expand...
Click to collapse
Greetings and welcome to xda. I am not sure the rom you mentioned is compatible with your device and I think your bootloader may also be locked. This thread here
http://forum.xda-developers.com/showthread.php?t=2517610
should help you with a custom recovery and I found this rom which is a s7 port for your device
http://forum.xda-developers.com/ver...ent/rom-aryamod-port-s7edge-portv6-5-t3506144
Good Luck
Sawdoctor

This ROm
sawdoctor said:
Greetings and welcome to xda. I am not sure the rom you mentioned is compatible with your device and I think your bootloader may also be locked. This thread here
http://forum.xda-developers.com/showthread.php?t=2517610
should help you with a custom recovery and I found this rom which is a s7 port for your device
http://forum.xda-developers.com/ver...ent/rom-aryamod-port-s7edge-portv6-5-t3506144
Good Luck
Sawdoctor
Click to expand...
Click to collapse
This is teh ROM i was trying to use but the main problem I'm having is trying to install a recovery tool everytime I do the phone gets stock on the software not authorized screen.
How do I know if teh bootloader is locked and if it is is there a way i can unblocke it?
http://forum.xda-developers.com/galaxy-note-3/development/darklord-s7-edge-port-6-0-1-mm-t3382954

anrabaro said:
This is teh ROM i was trying to use but the main problem I'm having is trying to install a recovery tool everytime I do the phone gets stock on the software not authorized screen.
How do I know if teh bootloader is locked and if it is is there a way i can unblocke it?
http://forum.xda-developers.com/galaxy-note-3/development/darklord-s7-edge-port-6-0-1-mm-t3382954
Click to expand...
Click to collapse
That rom may not be compatible with your device, the verizon variant is different to the other note 3's. I'm pretty sure the verizon note 3 is locked bootloader but if you ask your questions here
http://forum.xda-developers.com/verizon-galaxy-note-3/help
the experts there will be able to confirm this for you
Good Luck
Sawdoctor

Finally found how to install the ROM
So I finally found the solution on how to change the ROM on my SM-900V Verizon Wireless Note 3.
>>>>1) First Step How to Root the phone:
Activate USB debugging, download ArabicTool.exe.
I follow this youtube Vid to do it:
https://www.youtube.com/watch?v=GtuOPhSlymg
>>>>2) Unblock boot loader:
I follow this link:
http://forum.xda-developers.com/ver...l/official-note-3-verizon-bootloader-t3359370
>>>>3) Install TWRP (Using Flashly):
Download Flashly from the Android Play Store then download a recovery img using Flashly I picked TWRP.
>>>>4) Install the ROM:
I follow this link:
http://forum.xda-developers.com/galaxy-note-3/development/darklord-s7-edge-port-6-0-1-mm-t3382954
and
https://www.youtube.com/watch?v=-i6DsGKTsJc
So happy

Samsung j3 2017 root

Hey I'm new to the world of rooting. Wanna do it to get past the network tethering thing. I pay for hotspot. But even planet didn't stop my 8gigs from being used up. So I've started searching for how to keep going with my hotspot.
I have no idea how to do anything past basics. So the more detailed and lamen the answers the easier.
I guess to root the Samsung j3 with nougat on it is first get past unlocking it.
Any helpful tip to get the unlock code for free?
Next is rooting it. A lot of techno babble baffled me all night long. So yeah that's what I'm trying to get help with.
Thanks for the time you guys may spend

Bandcamp said:
Hey I'm new to the world of rooting. Wanna do it to get past the network tethering thing. I pay for hotspot. But even planet didn't stop my 8gigs from being used up. So I've started searching for how to keep going with my hotspot.
I have no idea how to do anything past basics. So the more detailed and lamen the answers the easier.
I guess to root the Samsung j3 with nougat on it is first get past unlocking it.
Any helpful tip to get the unlock code for free?
Next is rooting it. A lot of techno babble baffled me all night long. So yeah that's what I'm trying to get help with.
Thanks for the time you guys may spend
Click to expand...
Click to collapse
I also have a Samsung J3 running Nougat that I would like to root. Mine is a Samsung J3 Unlocked (SM-327U) running Android 7.0 with May 1, 2017 patches. I've enabled the "OEM unlock" under Developer Options but I can't find a tutorial or TWRP image that supports this version. I want to install SuperSU but I'm stuck without TWRP support. I've already tried both OneClickRoot and Kingo, both of which state that the device is unsupported. I'm assuming that under the hood they are just scripting out the process but still using the same Odin/TWRP/etc process.
Any ideas? Is there a way to translate the changes necessary from another version of the J3 (e.g. SM-327YZ) to this firmware or are we stuck waiting for supported to be added to these (awesome) tools?
Thank you!

After unlock
After the phone is unlocked it should be easier to root it. I have a few more days in my service cycle till I reach the phone active 90 days to get the free unlock. After that I'll start trying to figure out how to flash it again

Hello,
like you'll see I'm new here. My problem is, that i can't root my european Galaxy J3 (2017).
Model-No is SM-J330F/DS.
Is it just me or is every single root-method actually a fake for this device?

Bandcamp said:
After the phone is unlocked it should be easier to root it. I have a few more days in my service cycle till I reach the phone active 90 days to get the free unlock. After that I'll start trying to figure out how to flash it again
Click to expand...
Click to collapse
My J727T is carrier unlocked because i bought it outright at full retail. I dont know how an carrier unlocked device would change anything. Our bootloader is locked which has nothing to do with being carrier unlocked...

Sorry for Hijacking Thread...
Maybe I will buy SM-J330F in Germany as it is cheap... 200 Euro...
and seems no Fingerprint Sensor. :good:
For Germany DBT I found latest Firmware:
Code:
J330FXXU1[B]AQH2[/B]
Please.
Can I root SM-J330F
If yes, how?
Maybe somebody can please give Link to Instruction...
Thanx in advance.
Best Regards

if you want to bypass the 8gb hotspot limit you have to use foxfi and enable proxy in the app. if you set it correctly on your pc or gaming console it will not use data. no root is required anymore. i downloaded a full game on my ps4 using my hotspot and it hasn't used any data except my normal data and that doesn't matter since i have unlimited lte data.

uhlsam2017 said:
Hello,
like you'll see I'm new here. My problem is, that i can't root my european Galaxy J3 (2017).
Model-No is SM-J330F/DS.
Is it just me or is every single root-method actually a fake for this device?
Click to expand...
Click to collapse
HTML:
4pda.ru/forum/index.php?showtopic=838223&view=findpost&p=64546187

n00bhat said:
I also have a Samsung J3 running Nougat that I would like to root. Mine is a Samsung J3 Unlocked (SM-327U) running Android 7.0 with May 1, 2017 patches. I've enabled the "OEM unlock" under Developer Options but I can't find a tutorial or TWRP image that supports this version. I want to install SuperSU but I'm stuck without TWRP support. I've already tried both OneClickRoot and Kingo, both of which state that the device is unsupported. I'm assuming that under the hood they are just scripting out the process but still using the same Odin/TWRP/etc process.
Any ideas? Is there a way to translate the changes necessary from another version of the J3 (e.g. SM-327YZ) to this firmware or are we stuck waiting for supported to be added to these (awesome) tools?
Thank you!
Click to expand...
Click to collapse
I successfully rooted my J327U witb Chainfire's CF Autoroot (the T-Mobile variant J327T) via Odin.
After Root I installed Flashfire ( also by xda-developer Chainfire). I'm still playing with the app's various features but so far it is pretty awesome definitely an app I'll be making a donation to this next paycheck) you'll be able to make a backup of your device with it. Hope this helps.

Cold Inferno said:
I successfully rooted my J327U witb Chainfire's CF Autoroot (the T-Mobile variant J327T) via Odin.
After Root I installed Flashfire ( also by xda-developer Chainfire). I'm still playing with the app's various features but so far it is pretty awesome definitely an app I'll be making a donation to this next paycheck) you'll be able to make a backup of your device with it. Hope this helps.
Click to expand...
Click to collapse
if i used the CFauto root would that allow me to root the tmobile variant?

Kaiwaters said:
if i used the CFauto root would that allow me to root the tmobile variant?
Click to expand...
Click to collapse
It wont work. The tmobile variant and even the metropcs variant is bootloader locked therefore you cannot flash anything. I have a metropcs variant and everyone else in another thread has also. Me and a few others have tried for months to get root and it failed miserably. I suggest buying the sm-j327u. You can get it on samsung.com

Hello guys!
I've spent my day trying to root my J330FN without any succes.. I've found an option in developer menu to allow OEM to be unlocked.
I only need root, not custom recovery...
Please do you have a suggestion?
Thanks

dr.lube said:
Hello guys!
I've spent my day trying to root my J330FN without any succes.. I've found an option in developer menu to allow OEM to be unlocked.
I only need root, not custom recovery...
Please do you have a suggestion?
Thanks
Click to expand...
Click to collapse
Rooting shouldn't be a problem for this device
Post some specifics on what you have tried and the reason for failure.
I should be able to get something up if you post the details above and your firmware details.

ashyx said:
Rooting shouldn't be a problem for this device
Post some specifics on what you have tried and the reason for failure.
I should be able to get something up if you post the details above and your firmware details.
Click to expand...
Click to collapse
Thank you for the kind reply! This evening I'll try to summarize everything! Thanks
Inviato dal mio FRD-L09 utilizzando Tapatalk

dr.lube said:
Hello guys!
I've spent my day trying to root my J330FN without any succes.. I've found an option in developer menu to allow OEM to be unlocked.
I only need root, not custom recovery...
Please do you have a suggestion?
Thanks
Click to expand...
Click to collapse
https://desktop.firmware.mobi/ this should help. the firmware for the device is here: https://www.sammobile.com/firmwares/SM-J330FN/ make sure to choose your carrier along with the correct country. the cf autoroot for the j330f is on the firmware.mobi site it should work if you use odin. if it fails to flash or something goes wrong you should have your stock firmware.

Kaiwaters said:
if i used the CFauto root would that allow me to root the tmobile variant?
Click to expand...
Click to collapse
Sorry it's taken so long to reply back to you, I live right in the middle of the northbay California winecountry wildfires that devistated Santa Rosa, CA. so it's been somewhat crazy here.
The CF Autoroot that I used on my J327U is for the T-Mobile (J327T). I'm not sure if they started locking down their bootloaders, so you'll have to perform due dilligence on that end. If you do decide to give it a go, make sure you enable USB debugging and OEM unlock under developer options.

uhlsam2017 said:
Hello,
like you'll see I'm new here. My problem is, that i can't root my european Galaxy J3 (2017).
Model-No is SM-J330F/DS.
Is it just me or is every single root-method actually a fake for this device?
Click to expand...
Click to collapse
Well then look over here
4pda.ru/forum/index.php?showtopic=838223&st=40

thepcwiz101 said:
if you want to bypass the 8gb hotspot limit you have to use foxfi and enable proxy in the app. if you set it correctly on your pc or gaming console it will not use data. no root is required anymore. i downloaded a full game on my ps4 using my hotspot and it hasn't used any data except my normal data and that doesn't matter since i have unlimited lte data.
Click to expand...
Click to collapse
Or pda app thing thing...thats what i use when people ask for unrestricted hotspot, it also uses bluetooth as tether that does not use any of your 8 GB

bobbyp1086 said:
Or pda app thing thing...thats what i use when people ask for unrestricted hotspot, it also uses bluetooth as tether that does not use any of your 8 GB
Click to expand...
Click to collapse
I used the same app and used proxy but just saying if you use your ps4 (setup for the proxy on pdanet or foxfi) it will only work for soo long because depending on what your doing on the internet with your ps4 it may or may not count data. I have past 8gb on my hotspot and i mostly just updated games and my ps4 system software and watched videos on youtube.

J330FN (dont know if its DS variant)
I have tried the CF-AUTOROOT website and can't for the life of me, to get it to work.
I dont want to double post, so here is my reply in the firmware.mobi thread: ==>Click here <==
If i figure it out, or someone has succesfully helped me in rooting this monster of a phone, i will post back to help others.

New easy way to root ALL Samsung devices 100%

Hello everyone
Here is new method to root all Samsung devices,twrp not needed.
First you need to download EFTSU tool: https://mega.nz/file/34lDEBqB#7mSv2SeYKP2kReheBk7q5AU582TZUdsJy6GL5sd7O-I
Then you need file from this website where you can find for your device and download it : https://eftsu.com/
After you downloaded this file put your samsung device in download mode *need oem unlock* then flash your file with eftsu tool.
Your device will reboot it and it will during boot ask to reset ,then reset it.
When it comes to system you need to download and install eftsu manager: https://mega.nz/file/Oo1yCSiQ#rWlMbcBiBHSzv5oMioyGxQZ0ynxqaeqz_Nfm4ze240c
And you are done.
You can also install root checker to see if it rooted.

jasmin811 said:
root all Samsung devices
...
*need oem unlock*
Click to expand...
Click to collapse
US/CA Sammys: hmmm...
The rest are rather easy to root with Magisk anyway.

AndyYan said:
US/CA Sammys: hmmm...
The rest are rather easy to root with Magisk anyway.
Click to expand...
Click to collapse
There is more supported devices besides samsung that will work just look at the website above eftsu.com
If there is no device model supported in the list,just tell me an will add it.

if you need any help with it,I can help you.
What I'm looking for is twrp working for M105G,because with M105F is also working but during boot it ask for password,even if i format data in twrp.

I have note10 plus SM-N975U Snap dragon that has the OEM toggle missing and tried everything to make it appear but no luck and without that i can't install anything or unlock the bootloader......Any tools or ideas to overcome my situation?

if no oem in developer option than you have to wait for 7 days .

Hello! I want to root my Samsung Galaxy A01 with firmware A015MUBS3ATL8, I found all the files that I should download, but no way to unlock the bootloader, I did all the guides and when it asks me for confirmation on the bootloader screen to unlock it, I affirm and the phone is formatted and it reboots, but when re-entering the bootloader it is still blocked
Sorry for my bad English, I'm using Google Translate

Please help.
My phone is SM-G955F with Exynos processor. Hungarian XEH code. The latest PIE is running on it. OEM does not allow unlocking. The slider can be turned on, but it also turns off immediately after enabling. What can I do to make OEM resolution work?
Thank you.

jasmin811 said:
Hello everyone
Here is new method to root all Samsung devices,twrp not needed.
First you need to download EFTSU tool: https://mega.nz/file/34lDEBqB#7mSv2SeYKP2kReheBk7q5AU582TZUdsJy6GL5sd7O-I
Then you need file from this website where you can find for your device and download it : https://eftsu.com/
After you downloaded this file put your samsung device in download mode *need oem unlock* then flash your file with eftsu tool.
Your device will reboot it and it will during boot ask to reset ,then reset it.
When it comes to system you need to download and install eftsu manager: https://mega.nz/file/Oo1yCSiQ#rWlMbcBiBHSzv5oMioyGxQZ0ynxqaeqz_Nfm4ze240c
And you are done.
You can also install root checker to see if it rooted.
Click to expand...
Click to collapse
Hi
Samsung Galaxy Note 10+ not supported?

OEM unlock still doesn't work.

bautigarzabal said:
Hello! I want to root my Samsung Galaxy A01 with firmware A015MUBS3ATL8, I found all the files that I should download, but no way to unlock the bootloader, I did all the guides and when it asks me for confirmation on the bootloader screen to unlock it, I affirm and the phone is formatted and it reboots, but when re-entering the bootloader it is still blocked
Sorry for my bad English, I'm using Google Translate
Click to expand...
Click to collapse
you need to ulock developer option in setting-about phone-build info and tap 7 times in it.

Ptreki said:
OEM unlock still doesn't work.
Click to expand...
Click to collapse
activate also usb debbuging

fazi78 said:
Hi
Samsung Galaxy Note 10+ not supported?
Click to expand...
Click to collapse
check if there is file for you model in website

jasmin811 said:
usb debbuging-ot
Nem, nem, nem, nem, nem
I activated it too, but nothing happens.
Click to expand...
Click to collapse

I have a samsung galaxy j4 +
I got it from a friend today.
The phone is after a hard reset (some dumbass did it)
Unfortunately, there is no access to google accounts because the accounts were from her husband and he died.
I keep searching and trying but can't root. Because Debug Usb doesn't go on.
And the computer doesn't read the phone after all.
Yes, I have drivers installed, various Odins, I also took your EFTSU, Fastboot and I do not read my phone anywhere. Nothing else is just loading.
Yup i trying Hard reset many many times...

Jerry3Tears said:
I have a samsung galaxy j4 +
I got it from a friend today.
The phone is after a hard reset (some dumbass did it)
Unfortunately, there is no access to google accounts because the accounts were from her husband and he died.
I keep searching and trying but can't root. Because Debug Usb doesn't go on.
And the computer doesn't read the phone after all.
Yes, I have drivers installed, various Odins, I also took your EFTSU, Fastboot and I do not read my phone anywhere. Nothing else is just loading.
Yup i trying Hard reset many many times...
Click to expand...
Click to collapse
try to frp unlock your phone,you have here on xda tuts how to do it,just search for it.

what do you mean nothing happened?

I can't unlock the OEM with either method.

did you follow the guide i wrote above?
First you need file downloaded from the website and with the eftsu tool flash it in download mode,the when phone is reseted and comes in system install eftsu manager and root checker and in root checker you have to see if it's rooted or not.