Database Info

Going from 11.0.15.0 to Poco X2 11.0.7.0

Could anybody share how can I move from MiUI EU ROM for K30 11.0.15.0 to Poco X2 official build 11.0.7.0?
I installed EU ROM as I found flashing ROM with TWRP was easier than using Mi Flash tool, in case we want to switch between ROM's. But, after I installed 11.0.15.0 I figured lot of the custom ROM's do not boot after flashing them and phone boots into fastboot mode (except couple of ROM's). So, I have been looking at how switch back EU MiUI ROM from 11.0.15.0 to Poco X2 11.0.7.0. The issue am facing while flashing using Mi Flash tool is that it gives error of ARB (Anti rollback error: 2, also I checked the same by issuing fastboot getvar anti, it says 2), and I am not sure how to get past this.
Could someone please help me with this?

I think your device is triggered with anti-rollback. So you cannot install any rom with build less than 11.0.15.0 that is poco x2 11.0.7.0 cant be flashed. So, you have to wait until new poco build greater than 11.0.15.0 and then flash it. Until then, flash your existing rom or some custom rom. Do it carefully and dont ever flash older roms from now, if something goes wrong, your device will hardbrick and you will have to go to service center where they have authorized EDL access to your device to flash things. Best of Luck.

You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)

eagle06 said:
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
Click to expand...
Click to collapse
Bro, but what about anti-rollback hardbrick?.. new miui wont allow downgrade right? he has very newer build than 11.0.7.

eagle06 said:
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
Click to expand...
Click to collapse
vivek12341 said:
Bro, but what about anti-rollback hardbrick?.. new miui wont allow downgrade right? he has very newer build than 11.0.7.
Click to expand...
Click to collapse
@eagle06 am worried about 11.0.15.0 > 11.0.7.0 which will trigger ARB as @vivek12341 has pointed out and it will hard brick the device, from what I have read around, hence this post if anybody knows a way out. There seemed to be workarounds initially when Xiaomi introduced ARB, I have not seen anybody mentioning such things in recent times especially for MiUI 11.
The reason why I moved to 11.0.15.0 is was, as it has no bloatware etc, and I did NOT know about ARB, now that I have 11.0.15.0 most of the custom ROMs are based on Poco X2 11.0.7.0 and I am facing issues flashing ROMs based on 11.0.7.0, as the format data from TWRP does not wipe properly + I see 98% of the time device goes to fastboot mode even if I flash Poco stock recovery and clear the data, seems like 11.0.15.0 is also an issue
May be I will have to wait till Poco releases updates > 11.0.15.0 or for MiUI 12. Actually I still dont know, not many know much on this subject.
crDroid works without any issues (which is what my current daily driver, its a very stable ROM), flashing on 11.0.15.0 after clearing data, also any ROM whose dev releases fastboot ROM's those also I can flash and boot without issues, rest all ROM's dont and end up back in fastboot mode

coolcorner said:
Could anybody share how can I move from MiUI EU ROM for K30 11.0.15.0 to Poco X2 official build 11.0.7.0?
I installed EU ROM as I found flashing ROM with TWRP was easier than using Mi Flash tool, in case we want to switch between ROM's. But, after I installed 11.0.15.0 I figured lot of the custom ROM's do not boot after flashing them and phone boots into fastboot mode (except couple of ROM's). So, I have been looking at how switch back EU MiUI ROM from 11.0.15.0 to Poco X2 11.0.7.0. The issue am facing while flashing using Mi Flash tool is that it gives error of ARB (Anti rollback error: 2, also I checked the same by issuing fastboot getvar anti, it says 2), and I am not sure how to get past this.
Could someone please help me with this?
Click to expand...
Click to collapse
You should flash back to China rom (V11.0.15.0.QGHCNXM) using miflash and install TWRP-3.4.1B-0322 using fastboot. After that you can flash all custom roms as normal. I have tried almost all the custom roms and they all work without any problem.

Lol.. Bro i am on miui 12 beta and went back to 11.0.0.7 via twrp flash...
Just download this http://bigota.d.miui.com/V11.0.7.0....NGlobal_V11.0.7.0.QGHINXM_9c232b802a_10.0.zip
Open that in pc, modify the script and rename device name to phoenix from phoenixin.
On twrp format data.. Then reboot to twrp again, tranfer that zip file and just flash. You will be back on stock global 11.0.0.7
Also crdroid as you mentioned has custom vendor which is different from china eu or global one.
If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error.

eagle06 said:
Lol.. Bro i am on miui 12 beta and went back to 11.0.0.7 via twrp flash...
Just download this http://bigota.d.miui.com/V11.0.7.0....NGlobal_V11.0.7.0.QGHINXM_9c232b802a_10.0.zip
Open that in pc, modify the script and rename device name to phoenix from phonenixin.
On twrp format data.. Then reboot to twrp again, tranfer that zip file and just flash. You will be back on stock global 11.0.0.7
Also crdroid as you mentioned has custom vendor which is different from china eu or global one. e
If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error.
Click to expand...
Click to collapse
1. Which script are you talking about? I could not find any script. check attached snapshot.
2. And to do this step from TWRP to flash 11.0.7.0, do I need to be on MIUI EU ROM or I can flash from any custom ROM too?
3. You were on MIUI 12 beta (official global) and changed devicename from phoenixin to phoenix and flashed using TWRP after formatting data, without hitting ARB issue? Wow!
4. You mentioned https://forum.xda-developers.com/showpost.php?p=82502389&postcount=3 Telegram/Github where we can get official vendor zip which we can flash from TWRP, any links to that?
5. Is there a Redmi K30 global ROM which I can use instead of Poco X2, they should be same right?
eagle06 said:
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
Click to expand...
Click to collapse
Please share telegram or github link for vendor.zip which I can flash using TWRP. As crDroid has custom vendor may be that is why it works for me on EU ROM and I see other custom ROMs do not have vendor installed while flashing using TWRP.
jngiag said:
You should flash back to China rom (V11.0.15.0.QGHCNXM) using miflash and install TWRP-3.4.1B-0322 using fastboot. After that you can flash all custom roms as normal. I have tried almost all the custom roms and they all work without any problem.
Click to expand...
Click to collapse
As a final resort will go to China ROM V11.0.15.0.QGHCNXM (this will be chinese right?) or this itself is global K30 ROM? Any links to global official MIUI K30 ROM, all I get is K30 chinese ROM
Sorry, I am asking too many questions, I do not want to brick phone in these times and go stand in queue at Mi service center during these times, when the servicing engineer will touch my phone all over

coolcorner said:
1. Which script are you talking about? I could not find any script. check attached snapshot.
Its in META-INF/com/google/android/ file name updater-script. Change getprop("ro.product.device") == "phoenixin" || this to getprop("ro.product.device") == "phoenix" || . Why we are doing this? because we are using k30 twrp.. there is no special twrp for poco x2. phoenix = k30, phoenixin=poco x2
2. And to do this step from TWRP to flash 11.0.7.0, do I need to be on MIUI EU ROM or I can flash from any custom ROM too? Any rom
3. You were on MIUI 12 beta (official global) and changed devicename from phoenixin to phoenix and flashed using TWRP after formatting data, without hitting ARB issue? Wow! Yes with twrp. When you flashed twrp recovery , your device is now treated as K30 in twrp space
4. You mentioned https://forum.xda-developers.com/showpost.php?p=82502389&postcount=3 Telegram/Github where we can get official vendor zip which we can flash from TWRP, any links to that?check Pm , cant post telegram links here
5. Is there a Redmi K30 global ROM which I can use instead of Poco X2, they should be same right?Theres no K30 global.., poco x2 rom is global, k30 roms is china and there is eu custom rom based on chinese roms
Please share telegram or github link for vendor.zip which I can flash using TWRP. As crDroid has custom vendor may be that is why it works for me on EU ROM and I see other custom ROMs do not have vendor installed while flashing using TWRP.
Whenever you want to use custom rom without vendor , you need to flash either 11.0.0.7 zip or 11.0.0.7 vendor zip before flashing that custom rom
As a final resort will go to China ROM V11.0.15.0.QGHCNXM (this will be chinese right?) or this itself is global K30 ROM? Any links to global official MIUI K30 ROM, all I get is K30 chinese ROM
Sorry, I am asking too many questions, I do not want to brick phone in these times and go stand in queue at Mi service center during these times, when the servicing engineer will touch my phone all over
Click to expand...
Click to collapse
Check my replies in blue

coolcorner said:
As a final resort will go to China ROM V11.0.15.0.QGHCNXM (this will be chinese right?) or this itself is global K30 ROM? Any links to global official MIUI K30 ROM, all I get is K30 chinese ROM
Sorry, I am asking too many questions, I do not want to brick phone in these times and go stand in queue at Mi service center during these times, when the servicing engineer will touch my phone all over
Click to expand...
Click to collapse
It is a chinese rom. You can select english as your default language. It really doesn't matter as you are going to wipe it anyway if your purpose is to use it for flashing custom roms.

[Deleted]

coolcorner said:
Just now I tried flashing V11.0.15.0.QGHCNXM using Mi Flash tool, and I hit Anti Roll back error again. Not sure what I am missing here I am on same version 11.0.15.0 EU ROM which has same Anti 2, not sure why the error this time?
Click to expand...
Click to collapse
Bro If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error. Connect device and enable usb debugging and proceed.
Mi flash tool doesnt work for poco.....you always get that rollback error.
For fastboot zips use above tool.
For recovery zips use twrp.
Both methods flash the same thing and twrp will be replaced with stock recovery.
---------- Post added at 08:36 AM ---------- Previous post was at 08:20 AM ----------
Vendor only zip.
[ fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
Size : 1.12 GiB
Download : fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
https://drive.google.com/uc?id=1-mIvf3EhtZwLl_rg1cFgZIp5Zz4QlQZu&export=download
Flash via twrp. If you get error 7/wrong device check updater script and change name

eagle06 said:
Bro If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error. Connect device and enable usb debugging and proceed.
Mi flash tool doesnt work for poco.....you always get that rollback error.
For fastboot zips use above tool.
For recovery zips use twrp.
Both methods flash the same thing and twrp will be replaced with stock recovery.
Click to expand...
Click to collapse
Thanks, really appreciate your quick revert. I am trying out with xiaomitool now. I know TWRP method is simple, just edit/change the devicename. But, I am **** scared after seeing ARB error so many times. So using xiaomitool as you mentioned use it to overcome ARB error. I will update how it goes.
I thought Xiaomi is dev/custom dev friendly, seeing all these errors, no wonder why people resent MiUI so much, of course the hardware + price is good. From my search even Google on their devices is not this harsh about ARB blocking after unlocking bootloader.

eagle06 said:
Bro If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error. Connect device and enable usb debugging and proceed.
Mi flash tool doesnt work for poco.....you always get that rollback error.
For fastboot zips use above tool.
For recovery zips use twrp.
Both methods flash the same thing and twrp will be replaced with stock recovery.
---------- Post added at 08:36 AM ---------- Previous post was at 08:20 AM ----------
Vendor only zip.
[ fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
Size : 1.12 GiB
Download : fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
https://drive.google.com/uc?id=1-mIvf3EhtZwLl_rg1cFgZIp5Zz4QlQZu&export=download
Flash via twrp. If you get error 7/wrong device check updater script and change name
Click to expand...
Click to collapse
Thanks for the vendor image link.
Oh! yeah I am back in Poco 11.0.7.0 image, xiaomitool worked without issues. Thanks to you!!

@eagle06 do you know in this entire image (attached file) list (from tgz file) which is fastboot file? The reason I ask is, in Poco X2 in fastboot mode I see a single deadpixel, whereas when I was in EU MIUI I never saw that dead pixel. I plan to replace that file with EU MIUI fastboot image file, so when am in fastboot, it is clean without any dead pixels.

That small white pixel in fastboot is normal. All users have it including me.

Pic

eagle06 said:
Pic
Click to expand...
Click to collapse
Yep right that is the one. When I was on EU Miui, that one did not have, hence asked which is the image file for fastboot, thought I would flash that or replace next time I flash Poco stock when I am installing new custom ROM.
Yes, its a trivial thing can be ignored, does not really bother or harm.
BTW, so now that I am back in Poco X2 stock (On top of that I have installed BlissROM), next time I have to flash I can use either TWRP or Xiaomitool/V2.
1. For TWRP, I need to rename devicename to phoenix from phoenixin in updater-script and flash it using TWRP after clearing data
OR
2. I can use Xiaomitool/V2 with ADB debugging on (same step as last time)

Just check fastboot getvar anti for my phone, it also says 2. There is no problem for me flashing china rom with miflash. I have successfully flashed it 4 times before.
Good to have another way of flashing - will try the xiaomitool next time. :good:

jngiag said:
Just check fastboot getvar anti for my phone, it also says 2. There is no problem for me flashing china rom with miflash. I have successfully flashed it 4 times before.
Good to have another way of flashing - will try the xiaomitool next time. :good:
Click to expand...
Click to collapse
Woah! Miflash tool kept throwing errors at me and you are saying it worked for you? Phew!!
If I had flashed using TWRP, I might have been holding a 200gm brick in my hands LOL. Got lucky by using Xiaomitool/v2 then Thanks to you. I will stick to Xiaomitool for flashing stock ROMs hence forth.

Miui 12 beta

Anyone know whats going on witth the china beta where into the 2nd week without a beta

Android 11 is coming and they fix Android 11 bugs

hardziol said:
Android 11 is coming and they fix Android 11 bugs
Click to expand...
Click to collapse
Do we gey android 11 soon? what you think..

Vihru said:
Do we gey android 11 soon? what you think..
Click to expand...
Click to collapse
Yes this week or next week should be a beta update with Android 11

hardziol said:
Yes this week or next week should be a beta update with Android 11
Click to expand...
Click to collapse
Thats nice..

http://bigota.d.miui.com/20.7.30/miui_LMI_20.7.30_2de74df6ca_11.0.zip Android 11 is here.
This can not be flashed with current TWRP. It requires stock recovery to decrypt data partition. I did manage to install it. If someone wants to know how to, let me know ill make a guide

reliot said:
http://bigota.d.miui.com/20.7.30/miui_LMI_20.7.30_2de74df6ca_11.0.zip Android 11 is here.
This can not be flashed with current TWRP. It requires stock recovery to decrypt data partition. I did manage to install it. If someone wants to know how to, let me know ill make a guide
Click to expand...
Click to collapse
how to install it? and its multi language? thx

Warning! Please back up everything. You will loose data partition if something goes wrong. You have been warned. This was tested on K30 pro zoom edition with Chinese beta rom 20.7.9.
Requirements: pc with fastboot files.
Usb otg cable and USB stick at least 4gb.
Full tgz fastboot rom miui 12.0.x.x
20.7.9 and 20.7.30 recovery Chinese rom
Drawbacks with Android 11. No TWRP support. No magisk. No root.
1. Download full tgz Chinese rom miui 12. Extract it and flash stock recovery. You can skip this step if you have stock recovery already.
2. Fastboot boot into TWRP recovery using fastboot.exe. Do not flash or replace stock recovery. Phone will restart into TWRP.
3. Download 20.7.9 and extract file META-INF/com/google/android/update-binary and replace inside 20.7.30 rom.
4. I used USB otg cable with USB stick to flash in TWRP the patched rom.
5. Wait little as first boot is long.
Edit: this should be obvious, it is a Chinese rom so only English is supported.

Cc9pro to global rom

I have a xiaomi cc9 pro Chinese that is on 12.0.2 and want to convert it to global note 10.
I'm waiting for the bootloader to be unlocked until the waiting hours finish.
I'm not sure what steps to follow, kindly help.
I've also downloaded the latest global rom form miui.com but its a zip file and I can't figure out how to install this.
Tried updating through settings but it won't accept the package.
Attachment are the screenshots of the file I've downloaded.

BN37 said:
I have a xiaomi cc9 pro Chinese that is on 12.0.2 and want to convert it to global note 10.
I'm waiting for the bootloader to be unlocked until the waiting hours finish.
I'm not sure what steps to follow, kindly help.
I've also downloaded the latest global rom form miui.com but its a zip file and I can't figure out how to install this.
Tried updating through settings but it won't accept the package.
Attachment are the screenshots of the file I've downloaded.
Click to expand...
Click to collapse
HI there..
You have to download the fastboot ROM and extract it. After that you can boot your phone in fastboot mode, and just run the flash_all.bat file from the extracted ROM. That's everything what you have to do, but just keep it in mind, don't relock the bootloader otherwise you'll brick the phone.
Best
Adnan

m_adnan said:
HI there..
You have to download the fastboot ROM and extract it. After that you can boot your phone in fastboot mode, and just run the flash_all.bat file from the extracted ROM. That's everything what you have to do, but just keep it in mind, don't relock the bootloader otherwise you'll brick the phone.
Best
Adnan
Click to expand...
Click to collapse
Can you share the link for fastboot rom which is global and on latest version. I'm only able to find this room that I've attached.

Bootloop Problem?

I have an interesting problem. I was using a11 stable beta official. I wanted to go back to aosp rom. I know it's impossible. But before, I was installing the official A10 rom global then install a11 aosp rom. It was working. But now, When I try to install Official rom by fastboot or recovery or mi flash tool, it stucks on boot. But interesting, I can install Abhix Rog edition rom and A11 official stable beta rom. I can't figure out this problem. I'm using orange fox recovery, also tried with TWRP. Whatever I tried that didn't work. Is there any advice for solution? Thanks in advance.
NOTE : Before, in recovery there are two folders sdcard and scard1.But now even I do format data, I only see only sdcard folder, there's no sdcard1 folder.

I solved the problem. I re-partition sdcard then format data. Then install 12.0.8.0 fw. Install havoc os 4.3 then flash dm-verity disabled then flash permissiver_v5...Boom works

hucar13 said:
I solved the problem. I re-partition sdcard then format data. Then install 12.0.8.0 fw. Install havoc os 4.3 then flash dm-verity disabled then flash permissiver_v5...Boom works
Click to expand...
Click to collapse
Hello! i am having the same problem. can you please help me with the repartitioning?

First Download the below files
1. TWRP
2. MIUI Firmware( Region wise)
3. Download Recovery Rom.
3. Download Fastboot Rom.
4. Download Mi Global Flash Tool.
5. Boot into Fastboot.
6. Flash TWRP. Install MIUI Firmware( would be around 80MB -100 MB Only) zip file.
7. install the Recovery Rom zip file. Format Data.
8. Reboot in to Bootloader.
9. Now open the Mi global flash tool and select the extracted Fastboot rom and click flash..
Hope this will solve the Problem

Question How to root Poco X3 Pro?

I have successfully unlocked my bootloader with the Xiaomi Unlock tool. I am new here and I want to know how I can root my Poco X3 Pro (I have 8GB 256GB Global Variant)? Can someone share the working TWRP and Magisk? I just want to root my phone if someone has any working version of Magisk to flash from Fastboot mode it will be enough.

You don't need flash TWRP to install magisk. You have to download the firmware you are using and copy the boot.img to the internal storage. Then install the latest version of the magisk app and select "patch boot.img" as the installation method. The generated file must be flashed by fastboot ("fastboot flash boot boot.img"). Congrats! You're root.

Alkalinorap said:
You don't need flash TWRP to install magisk. You have to download the firmware you are using and copy the boot.img to the internal storage. Then install the latest version of the magisk app and select "patch boot.img" as the installation method. The generated file must be flashed by fastboot ("fastboot flash boot boot.img"). Congrats! You're root.
Click to expand...
Click to collapse
While searching on google to download the firmware I found 2 versions:
1. Fastboot version of the ROM
2. Recovery version of the ROM
To patch the boot.img which version I will need?

poco x3 pro said:
While searching on google to download the firmware I found 2 versions:
1. Fastboot version of the ROM
2. Recovery version of the ROM
To patch the boot.img which version I will need?
Click to expand...
Click to collapse
Fastboot version.

poco x3 pro said:
While searching on google to download the firmware I found 2 versions:
1. Fastboot version of the ROM
2. Recovery version of the ROM
To patch the boot.img which version I will need?
Click to expand...
Click to collapse
Could you provide a link to the firmware you found?

urbanman2004 said:
Could you provide a link to the firmware you found?
Click to expand...
Click to collapse
Click here to Download It's MIUI Global 12.0.4.0 (RJUMIXM)
In case you need Boot.img (Extracted from above ROM link)

poco x3 pro said:
Click here to Download It's MIUI Global 12.0.4.0 (RJUMIXM)
In case you need Boot.img (Extracted from above ROM link)
Click to expand...
Click to collapse
Do you know if there's a link available for the EU version

urbanman2004 said:
Do you know if there's a link available for the EU version
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=2188818919693771981

poco x3 pro said:
https://androidfilehost.com/?fid=2188818919693771981
Click to expand...
Click to collapse
I just made an account to remind: This is the Xiaomi.eu rom based on the chinese version
It is not the stock rom officially for the EU, the name of that would be "RJUEUXM"
I believe this is important, in case one wants to lock the bootloader again. From what I have read, unlocking a bootloader of a global/EU based Phone and downloading a chinese based rom and locking the bootloader will brick the phone. At least that's what I've read

Bootloader unlocked required???

ralok089 said:
Bootloader unlocked required???
Click to expand...
Click to collapse
ofcourse

Hello,
I'm stuck with rooting... I had:
-unlocked bootloader after 168 hours.
-downloaded the fastboot rom of 12.0.4.0(RJUEUXM)
-extracted boot.img
Magisk app:
Magisk
Installed N/A A/B No
Ramdisk Yes SAR Yes
App
Latest 22.1 (22100) (20)
Installed 22.1 (22100)
Package com.topjohnwu.magisk
When I select install, there is 1 method only: "Select and Patch a file"
I select the extracted "boot.img" from the phone storage, "LET'S GO" --->>
- Device platform: arm-v8a
- Installing: 22.1 (22100)
! Unable to extract files
! Installation failed
Could you help me?

lulzor said:
Hello,
I'm stuck with rooting... I had:
-unlocked bootloader after 168 hours.
-downloaded the fastboot rom of 12.0.4.0(RJUEUXM)
-extracted boot.img
Magisk app:
Magisk
Installed N/A A/B No
Ramdisk Yes SAR Yes
App
Latest 22.1 (22100) (20)
Installed 22.1 (22100)
Package com.topjohnwu.magisk
When I select install, there is 1 method only: "Select and Patch a file"
I select the extracted "boot.img" from the phone storage, "LET'S GO" --->>
- Device platform: arm-v8a
- Installing: 22.1 (22100)
! Unable to extract files
! Installation failed
Could you help me?
Click to expand...
Click to collapse
Upload and send me boot.img by pm, I'm going to try patch it to know if it is a problem with your magisk or the file.

it seems that Magisk 22.1 was the problem, uninstalled, and installed v22.0. This version was able to do its job.

lulzor said:
it seems that Magisk 22.1 was the problem, uninstalled, and installed v22.0. This version was able to do its job.
Click to expand...
Click to collapse
I can do it with 22.1, I think something strange happened with your phone.

Do we have to patch vbmeta also??

Has anybody had any luck flashing the EU 12.0.5.0 (RJUEUXM)? My bootloader is unlocked and I put my device in fastboot mode, extracted all the files in archived in the rom into my adb folder (which contains the adb repositories) and double-clicked "flash_all.bat" and let the process complete. However, my device does a constant boot loop of the POC splash screen. I thought what I did would be sufficient, or would I need to use the Mi Flash tool to proceed w/ this process instead?

i m waiting for the 6/128 variant. do i need a different firmware from the aforementioned one?

nikapos said:
i m waiting for the 6/128 variant. do i need a different firmware from the aforementioned one?
Click to expand...
Click to collapse
I don't think so

will i be receiving formal OTA updates if i just root the phone? (no custom rom, no custom recovery)
tried searching, but didnt find something relevant in this thread.