Related
Hi All
I am on MIUI 10.3.1 Stock ROM and Recovery. I can download update, but when it is about to update, says something went wrong.
I tried to download the update zip file and tried to update using choose package, the same error.
I must tell you that in order to enable Camera2 API, I had installed TWRP_ZCX recovery temporarily and had flashed HAL3_Enable_MIUI_PIE a month before.
I am sure this error might have something to do with that recovery. Any help?
Will installing a stock recovery sort the error? If yes, where do I get it? But more importantly, will I lose all my data?
Download full recovery package and install
SunilSuni said:
Download full recovery package and install
Click to expand...
Click to collapse
Can you please explain slightly in detail? and Will I lose existing data?
My bootloader is unlocked
Download full recovery package and install
SunilSuni said:
Download full recovery package and install
Click to expand...
Click to collapse
I have got that far, any additional info like where do I get full recovery package etc would be much appreciated..
vu2pmc said:
I have got that far, any additional info like where do I get full recovery package etc would be much appreciated..
Click to expand...
Click to collapse
Mi community website
Download link for 10.3.2
http://bigota.d.miui.com/V10.3.2.0.PEIMIXM/miui_HMNote5Global_V10.3.2.0.PEIMIXM_7d750f3322_9.0.zip
SunilSuni said:
Mi community website
Download link for 10.3.2
http://bigota.d.miui.com/V10.3.2.0.PEIMIXM/miui_HMNote5Global_V10.3.2.0.PEIMIXM_7d750f3322_9.0.zip
Click to expand...
Click to collapse
Hi Sunil,
I tried this zip file in two ways, one is by using the system update and choosing package. It gave me the same error.
So i tried to use this file for Mi Flash tool, but says flash script not found.
Any more advice?
vu2pmc said:
Hi Sunil,
I tried this zip file in two ways, one is by using the system update and choosing package. It gave me the same error.
So i tried to use this file for Mi Flash tool, but says flash script not found.
Any more advice?
Click to expand...
Click to collapse
What's your device model ? Is it whyred or Vince ?? Doest it have dual camera or single camera ??
You need fastboot ROM package to flash in Mi Flash Tool
Link for fastboot ROM : http://bigota.d.miui.com/V10.3.2.0....XM_20190808.0000.00_9.0_global_3e234be300.tgz
ROM link shared here is for Redmi Note 5 Pro/Global
SunilSuni said:
What's your device model ? Is it whyred or Vince ?? Doest it have dual camera or single camera ??
You need fastboot ROM package to flash in Mi Flash Tool
Link for fastboot ROM : http://bigota.d.miui.com/V10.3.2.0....XM_20190808.0000.00_9.0_global_3e234be300.tgz
ROM link shared here is for Redmi Note 5 Pro/Global[/QUOTE
My device is an India version of Note 5 pro.
It's a dual camera version.
Model name mentioned is ME17S.
I'm downloading the fastboot Rom from the link you've mentioned..
I've the MIFLASH tool, now trying to see how I can keep my data intact..I got a few banking apps...
Click to expand...
Click to collapse
Hello,i think this is funny becquse igot the same error. But,I have locked bootloader no root, i was thinking about enabling camera2api ,but not tried it. Only flashed (via updater app) recovery roms (also tried dev. Versions of roms) , and in each rom version is the same error. So my OTA dont work anymore. Last update i must downloaded manually. Somthing ,somewhere is wrong.
Btw: (whyred global version phone,in EU)
Well, 10.3.2 fastboot also didnt flash properly. So I tried 10.3.1 Fastboot files using MI flash tool, after 10.3.1 zip file also failed. And 10.3.1 fastboot file flashed successfully and then it updated normally to 10.3.2. Guess my recovery image was corrupted for some reason.
If you tried flashing Pixel Experience or any other custom ROM and lost your mobile network then flash this stock ROM.
Downloads:
ROM
FLASH ALL COMMAND
Instructions:
1. Download both files
2. Extract them in the Minimum ADB folder
3. Run the Flash-All.bat file.
4. Wait till its all done and reboot.
It should be working now :highfive:
**NOTE: This is for the Indian Version Only, don't flash this on any other device**
**Also i'm not responsible for anything, flash it on your own risk**
Had this issue since October last year. Didn't try to fix it because i upgraded. Trying it now. Will share feedback shortly.
Also if anyone is confused about the instructions, Read below.
1. Download both files,
2. Copy the "Flash-All.bat" file to C:\Program Files (x86)\Minimal ADB and Fastboot (Or your default installation directory for ADB)
3. Extract the ZIP file directly to the same folder.
4. Reboot the phone into the bootloader and plug it in.
5. Double click and run "Flash-All.bat"
6. Reboot after done.
[Update] - It works! Thank you!
So, does this mean - Indian Moto X4 (XT1900-2) does not support any custom ROM? As missing SIM functionality is a huge disappointment.
This must be flashed before flashing custom roms. This updates the firmware to the latest stock firmware so that phone becomes custom rom compatible.
Ok, got it
ROM Link is not working, can you please re upload it?
Manish54 said:
If you tried flashing Pixel Experience or any other custom ROM and lost your mobile network then flash this stock ROM.
Downloads:
ROM
FLASH ALL COMMAND
Instructions:
1. Download both files
2. Extract them in the Minimum ADB folder
3. Run the Flash-All.bat file.
4. Wait till its all done and reboot.
It should be working now :highfive:
**NOTE: This is for the Indian Version Only, don't flash this on any other device**
**Also i'm not responsible for anything, flash it on your own risk**
Click to expand...
Click to collapse
Instead of this, Can I flash firmware of second post in Official Lineage OS thread?
pbu80 said:
ROM Link is not working, can you please re upload it?
Click to expand...
Click to collapse
Working for me.
pothaiahgari omkar said:
Instead of this, Can I flash firmware of second post in Official Lineage OS thread?
Click to expand...
Click to collapse
No idea
pothaiahgari omkar said:
Instead of this, Can I flash firmware of second post in Official Lineage OS thread?
Click to expand...
Click to collapse
That looks like a old firmware. You can flash the firmware in this thread.
hello. i want to convert my redmi k30 to poco x2 . my redmi k30 is currently bootloader unlocked.. can i flash poco x2 rom in it via mi flash tool ? is it safe? i mean ,any chance of accidental bootloader relock and bricking.? i will ofcourse select 'clean all and flash ' . is there any script to be modified for pheonix ? thanks in advance
Why would you want to do that? Is there any benefit? Just curious since as far as I know convert to Poco X2 the phone will lose NFC and gain nothing.
Never_Sm1le said:
Why would you want to do that? Is there any benefit? Just curious since as far as I know convert to Poco X2 the phone will lose NFC and gain nothing.
Click to expand...
Click to collapse
because sir, i live in bangladesh and i need google services to properly sync my contacts etc. in china roms, the google services doesnot work correctly , but it is very fast and smooth..i also flashed miui 11 stable EU roms. but those were not as smooth as china roms plus, lags and hiccups occur here and there.. so now i want to convert perfectly to poco x2 rom via mi flash. is it safe sir?
arifn82 said:
because sir, i live in bangladesh and i need google services to properly sync my contacts etc. in china roms, the google services doesnot work correctly , but it is very fast and smooth..i also flashed miui 11 stable EU roms. but those were not as smooth as china roms plus, lags and hiccups occur here and there.. so now i want to convert perfectly to poco x2 rom via mi flash. is it safe sir?
Click to expand...
Click to collapse
I think it's should be ok but I have used xiaomi EU 12 and notice no lags and hiccups at all. Or you could try an AOSP rom with Gapps like Havoc or MSM Xtended, this is much safer than trying to convert from 1 model to another.
Never_Sm1le said:
I think it's should be ok but I have used xiaomi EU 12 and notice no lags and hiccups at all. Or you could try an AOSP rom with Gapps like Havoc or MSM Xtended, this is much safer than trying to convert from 1 model to another.
Click to expand...
Click to collapse
flashed poco x2's (12.0.1) via latest TWRP and everything is fantastic.... just missing the notification LED....plz poco team, bring it back !
arifn82 said:
flashed poco x2's (12.0.1) via latest TWRP and everything is fantastic.... just missing the notification LED....plz poco team, bring it back !
Click to expand...
Click to collapse
how did you do it, i tried flashing x2 12.0.1 but i'm getting error in the twrp.
bongski09 said:
how did you do it, i tried flashing x2 12.0.1 but i'm getting error in the twrp.
Click to expand...
Click to collapse
edit the script from phoenixin to phoenix
arifn82 said:
edit the script from phoenixin to phoenix
Click to expand...
Click to collapse
How to do it.?
Hi Arif,
I am also from Bangladesh and I have Redmi K30 4G.I also Want to flash Poco X2 rom. But How to Do that?? Can you guide me through this process??? Kindly Give me you Facebook ID or Any Other Direct contact information.
My Facebook Profile URL:- facebook.com/imTheMehrab
imTheMehrab said:
Hi Arif,
I am also from Bangladesh and I have Redmi K30 4G.I also Want to flash Poco X2 rom. But How to Do that?? Can you guide me through this process??? Kindly Give me you Facebook ID or Any Other Direct contact information.
My Facebook Profile URL:- facebook.com/imTheMehrab
Click to expand...
Click to collapse
first of all, do it at your own risk.!!! have the latest twrp installed. get the twrp flashable indian stable rom zip downloaded. extract the zip file> META-INF>com>google>android>updater-script . open this updater script with notepad and edit the product name of first two lines from 'PHOENIXIN' to "PHOENIX" .do it for every PHOENIXIN ,for first two lines only. thats it. save the file and repack the zip again and flash.
arifn82 said:
first of all, do it at your own risk.!!! have the latest twrp installed. get the twrp flashable indian stable rom zip downloaded. extract the zip file> META-INF>com>google>android>updater-script . open this updater script with notepad and edit the product name of first two lines from 'PHOENIXIN' to "PHOENIX" .do it for every PHOENIXIN ,for first two lines only. thats it. save the file and repack the zip again and flash.
Click to expand...
Click to collapse
Can I Make this as a Fastboot File and Flash my Full rom with MI flash Tool ??? i mean i wanna do this like fastboot rom do.is it possible ??
imTheMehrab said:
Can I Make this as a Fastboot File and Flash my Full rom with MI flash Tool ??? i mean i wanna do this like fastboot rom do.is it possible ??
Click to expand...
Click to collapse
actually, i dont know much about mi flash tool or fastboot rom flashing. its dangerous and confusing. TWRP flashable zips are fully safe and easy ! as far as i know, you can only edit the flashable zip's script. mi flash tool method doesnot allow script editing as far as i know. better you make a post yourself at QnA ..thanks....
arifn82 said:
first of all, do it at your own risk.!!! have the latest twrp installed. get the twrp flashable indian stable rom zip downloaded. extract the zip file> META-INF>com>google>android>updater-script . open this updater script with notepad and edit the product name of first two lines from 'PHOENIXIN' to "PHOENIX" .do it for every PHOENIXIN ,for first two lines only. thats it. save the file and repack the zip again and flash.
Click to expand...
Click to collapse
Im from bangladesh, i want to install poco x2 rom in my redmi k30. After installing, did u get ota updates?
If ulocked bootloader, You can flash via fastboot mode. Just download fastboot/edl/factory files
i was on miui 11 then i installed twrp correctly and even used custom roms then i got bored of them and then installed eu miui 12 for redmi k30 which has some bugs and now i want to go back to official miui as it has lauched , so i downloaded miui 12 from xda the fastboot rom then tried flashing it with miflash but it shows crclist error i have adb and fastboot installed on my comp please help me go back to miui :crying:
update : i have also put the folder in my c drive and shortend the name to + edited the bat file to skip the anti-rollback function nothing is working
Did you try moving yor folder to the desktop?
tuskan_supa said:
Did you try moving yor folder to the desktop?
Click to expand...
Click to collapse
I was first doing it from desktop only it wasn't working so I put both mi flash and the fastboot ROM in the c drive .
It did not work
On Xiaomi.eu there's a table that show K30 does not have anti-rollback, so I don't think your problem is related to anti-rollback.
Never_Sm1le said:
On Xiaomi.eu there's a table that show K30 does not have anti-rollback, so I don't think your problem is related to anti-rollback.
Click to expand...
Click to collapse
I have the Indian variant maybe that has the anti-rollback
bewakoof said:
I have the Indian variant maybe that has the anti-rollback
Click to expand...
Click to collapse
Indian variant of K30? Isn't that just Poco X2? Otherwise K30 is a Chinese-only phone, no other variant.
Never_Sm1le said:
Indian variant of K30? Isn't that just Poco X2? Otherwise K30 is a Chinese-only phone, no other variant.
Click to expand...
Click to collapse
Yeah poco x2 and k30 are being treated as a different phone I think
bewakoof said:
Yeah poco x2 and k30 are being treated as a different phone I think
Click to expand...
Click to collapse
Can't say for sure but I think if K30 doesn't have anti-rollback then Poco X2 wouldn't too. Also have you install Qualcomm USB driver? This show up after I google "flash crclist error". Other solution is create a folder named "log" in MiFlash folder. Try these.
Never_Sm1le said:
Can't say for sure but I think if K30 doesn't have anti-rollback then Poco X2 wouldn't too. Also have you install Qualcomm USB driver? This show up after I google "flash crclist error". Other solution is create a folder named "log" in MiFlash folder. Try these.
Click to expand...
Click to collapse
I have installed all the drivers via miflash 5 times but I have not tried the log one . I will try this method on this coming Saturday and then update ( it would be very helpful if you shared the link as I have practically gone through every result and still couldn't find the 'log' folder one )
bewakoof said:
I have installed all the drivers via miflash 5 times but I have not tried the log one . I will try this method on this coming Saturday and then update ( it would be very helpful if you shared the link as I have practically gone through every result and still couldn't find the 'log' folder one )
Click to expand...
Click to collapse
That solution is shared by the Mi Vietnam community. I haven't encounter problems like yours so I don't know if it's work or not.
This is what I usually do: Install MiFlashPro on the E drive, extract the fastboot rom on the root of the drive (E:/ rom folder) then install. The install went smoothly.
Never_Sm1le said:
That solution is shared by the Mi Vietnam community. I haven't encounter problems like yours so I don't know if it's work or not.
This is what I usually do: Install MiFlashPro on the E drive, extract the fastboot rom on the root of the drive (E:/ rom folder) then install. The install went smoothly.
Click to expand...
Click to collapse
I didn't knew about the mi flash pro tool I was using miflash , anyway that tool looks kinda promising I'll definitely do the flash by Saturday and then update
Thank you so much for your help kind stranger .
bewakoof said:
i was on miui 11 then i installed twrp correctly and even used custom roms then i got bored of them and then installed eu miui 12 for redmi k30 which has some bugs and now i want to go back to official miui as it has lauched , so i downloaded miui 12 from xda the fastboot rom then tried flashing it with miflash but it shows crclist error i have adb and fastboot installed on my comp please help me go back to miui :crying:
update : i have also put the folder in my c drive and shortend the name to + edited the bat file to skip the anti-rollback function nothing is working
Click to expand...
Click to collapse
Crclist error is shown when the path of the rom is too long/complicated, move the rom to desktop then try.
bewakoof said:
i was on miui 11 then i installed twrp correctly and even used custom roms then i got bored of them and then installed eu miui 12 for redmi k30 which has some bugs and now i want to go back to official miui as it has lauched , so i downloaded miui 12 from xda the fastboot rom then tried flashing it with miflash but it shows crclist error i have adb and fastboot installed on my comp please help me go back to miui :crying:
update : i have also put the folder in my c drive and shortend the name to + edited the bat file to skip the anti-rollback function nothing is working
Click to expand...
Click to collapse
Hey download fastboot rom for your respective device then extract the zip folder then open flash_all.sh and the script gets executed.
I have successfully unlocked my bootloader with the Xiaomi Unlock tool. I am new here and I want to know how I can root my Poco X3 Pro (I have 8GB 256GB Global Variant)? Can someone share the working TWRP and Magisk? I just want to root my phone if someone has any working version of Magisk to flash from Fastboot mode it will be enough.
You don't need flash TWRP to install magisk. You have to download the firmware you are using and copy the boot.img to the internal storage. Then install the latest version of the magisk app and select "patch boot.img" as the installation method. The generated file must be flashed by fastboot ("fastboot flash boot boot.img"). Congrats! You're root.
Alkalinorap said:
You don't need flash TWRP to install magisk. You have to download the firmware you are using and copy the boot.img to the internal storage. Then install the latest version of the magisk app and select "patch boot.img" as the installation method. The generated file must be flashed by fastboot ("fastboot flash boot boot.img"). Congrats! You're root.
Click to expand...
Click to collapse
While searching on google to download the firmware I found 2 versions:
1. Fastboot version of the ROM
2. Recovery version of the ROM
To patch the boot.img which version I will need?
poco x3 pro said:
While searching on google to download the firmware I found 2 versions:
1. Fastboot version of the ROM
2. Recovery version of the ROM
To patch the boot.img which version I will need?
Click to expand...
Click to collapse
Fastboot version.
poco x3 pro said:
While searching on google to download the firmware I found 2 versions:
1. Fastboot version of the ROM
2. Recovery version of the ROM
To patch the boot.img which version I will need?
Click to expand...
Click to collapse
Could you provide a link to the firmware you found?
urbanman2004 said:
Could you provide a link to the firmware you found?
Click to expand...
Click to collapse
Click here to Download It's MIUI Global 12.0.4.0 (RJUMIXM)
In case you need Boot.img (Extracted from above ROM link)
poco x3 pro said:
Click here to Download It's MIUI Global 12.0.4.0 (RJUMIXM)
In case you need Boot.img (Extracted from above ROM link)
Click to expand...
Click to collapse
Do you know if there's a link available for the EU version
urbanman2004 said:
Do you know if there's a link available for the EU version
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=2188818919693771981
poco x3 pro said:
https://androidfilehost.com/?fid=2188818919693771981
Click to expand...
Click to collapse
I just made an account to remind: This is the Xiaomi.eu rom based on the chinese version
It is not the stock rom officially for the EU, the name of that would be "RJUEUXM"
I believe this is important, in case one wants to lock the bootloader again. From what I have read, unlocking a bootloader of a global/EU based Phone and downloading a chinese based rom and locking the bootloader will brick the phone. At least that's what I've read
Bootloader unlocked required???
ralok089 said:
Bootloader unlocked required???
Click to expand...
Click to collapse
ofcourse
Hello,
I'm stuck with rooting... I had:
-unlocked bootloader after 168 hours.
-downloaded the fastboot rom of 12.0.4.0(RJUEUXM)
-extracted boot.img
Magisk app:
Magisk
Installed N/A A/B No
Ramdisk Yes SAR Yes
App
Latest 22.1 (22100) (20)
Installed 22.1 (22100)
Package com.topjohnwu.magisk
When I select install, there is 1 method only: "Select and Patch a file"
I select the extracted "boot.img" from the phone storage, "LET'S GO" --->>
- Device platform: arm-v8a
- Installing: 22.1 (22100)
! Unable to extract files
! Installation failed
Could you help me?
lulzor said:
Hello,
I'm stuck with rooting... I had:
-unlocked bootloader after 168 hours.
-downloaded the fastboot rom of 12.0.4.0(RJUEUXM)
-extracted boot.img
Magisk app:
Magisk
Installed N/A A/B No
Ramdisk Yes SAR Yes
App
Latest 22.1 (22100) (20)
Installed 22.1 (22100)
Package com.topjohnwu.magisk
When I select install, there is 1 method only: "Select and Patch a file"
I select the extracted "boot.img" from the phone storage, "LET'S GO" --->>
- Device platform: arm-v8a
- Installing: 22.1 (22100)
! Unable to extract files
! Installation failed
Could you help me?
Click to expand...
Click to collapse
Upload and send me boot.img by pm, I'm going to try patch it to know if it is a problem with your magisk or the file.
it seems that Magisk 22.1 was the problem, uninstalled, and installed v22.0. This version was able to do its job.
lulzor said:
it seems that Magisk 22.1 was the problem, uninstalled, and installed v22.0. This version was able to do its job.
Click to expand...
Click to collapse
I can do it with 22.1, I think something strange happened with your phone.
Do we have to patch vbmeta also??
Has anybody had any luck flashing the EU 12.0.5.0 (RJUEUXM)? My bootloader is unlocked and I put my device in fastboot mode, extracted all the files in archived in the rom into my adb folder (which contains the adb repositories) and double-clicked "flash_all.bat" and let the process complete. However, my device does a constant boot loop of the POC splash screen. I thought what I did would be sufficient, or would I need to use the Mi Flash tool to proceed w/ this process instead?
i m waiting for the 6/128 variant. do i need a different firmware from the aforementioned one?
nikapos said:
i m waiting for the 6/128 variant. do i need a different firmware from the aforementioned one?
Click to expand...
Click to collapse
I don't think so
will i be receiving formal OTA updates if i just root the phone? (no custom rom, no custom recovery)
tried searching, but didnt find something relevant in this thread.