Related
This is another placeholder thread!
Case + Scratch Guard
Hi Team,
Since SGR doesnt sport a Gorilla Glass display, which is the best combination of Case + Scratch Guard to protect it?
I've already ordered case mate barely there. Quality of CM is usually very high.
About screen protectors- so I haven't seen/tested any good one. All of them are cheap, self-adhesive **** impossible to apply and avoid bubbles. Either Zagg or Copter doesn't support our device yet, but maybe some of you found a decent one?
EDIT: I've just given a shot to this:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150684872722#ht_1976wt_1026
According to users' opinions it gives a decent protection for perfect price.
m.kochan10 said:
I've already ordered case mate barely there. Quality of CM is usually very high.
About screen protectors- so I haven't seen/tested any good one. All of them are cheap, self-adhesive **** impossible to apply and avoid bubbles. Either Zagg or Copter doesn't support our device yet, but maybe some of you found a decent one?
EDIT: I've just given a shot to this:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150684872722#ht_1976wt_1026
According to users' opinions it gives a decent protection for perfect price.
Click to expand...
Click to collapse
I only buy matte screen protectors off eBay.
Usually i got for the cheapest **** there. I cannot tell the difference between a $20 and a $1 screen protector.
The best way to put on the protector is to apply it right after removing the original protector that comes when u buy the phone brand new.
I know i know.....Most of u buy the protectors AFTER u buy the phone.
I've always bought the protectors and case before i buy the phone hahaha.
Nevermind this.
Next, never use the microfibre cloth **** they provide for free.
Usually the cheap yellow cloth they give is useless.
I have 1 from Ray Ban, 1 from Swarowksi, 1 from Oakley.
Use the best u can afford. The difference is great !
Wipe down the entire phone.
Careful never to touch the screen.
Some ppl apply a few drops of water on the screen for moving it after applying.
I dun.
Make sure no dust or specks.
If any, use a sticky tape.
Dun peel of the whole screen protector.
Follow this method....
This is similar to how i do it.
http://www.youtube.com/watch?v=AZTFd-9xWbE
Cheers !
Thanks a lot mate!
I've usually followed all steps you wrote but always some small piece of **** goes under the film and as a result I get unremovable bubble, so I don't trust those self-adhesive protectors. I've already used 5 of them (cheap **** between 2 and 7 USD) and never succeeded I've always had better luck with zagg's invisible shield, i mean those applicable with water.
So you have to buy a Swarovski Crystal for 1000US$ to get the cloth and then be able to clean the screen.
hehe... just joking....
Good guide.
I used Vikuiti screen protectors in the past and found them very good
I don't see the ones i used before, but they have several ones for the Galaxy R
http://www.protectionfilms24.com/search.html?searchfield=Samsung+I9103+Galaxy+R&geraet=6345
m.kochan10 said:
Thanks a lot mate!
I've usually followed all steps you wrote but always some small piece of **** goes under the film and as a result I get unremovable bubble, so I don't trust those self-adhesive protectors. I've already used 5 of them (cheap **** between 2 and 7 USD) and never succeeded I've always had better luck with zagg's invisible shield, i mean those applicable with water.
Click to expand...
Click to collapse
If u get **** under the film just before setting it down, lift up the film and use sticky/celo tape and pick it up. then continue laying down the film.
Only release the film down completely when u cannot see any dirt specks between screen n film.
User a tooth pick/hook/pin....anything that will not leave stain or grease.
our fingers are grease magnets.
buy those 10 sheets for under $5-8 from eBay and practice.
U will become Master Screen Protector Installer !
---------- Post added at 05:20 PM ---------- Previous post was at 05:15 PM ----------
legion1911 said:
So you have to buy a Swarovski Crystal for 1000US$ to get the cloth and then be able to clean the screen.
hehe... just joking....
Good guide.
Click to expand...
Click to collapse
U can pick some off eBay for cheap.
Just need to look.
Cheers !
s4sixty said:
buy those 10 sheets for under $5-8 from eBay and practice.
U will become Master Screen Protector Installer !
Click to expand...
Click to collapse
hehehe that was good
Thanks you Guys..
Agreed that CaseMate is one of the best quality for cases. Which type would be good enough to withstand accidental drops? Rubber/Jelly/Hard Case?
Also, is there a suggested brand for the screen protectors? I require one that is scratch & fingerprint-resistant.
Read online that Matt-type protectors make the screen look dim! Is it true?
Thanks in advance,
Bharath K
snbkumar said:
Thanks you Guys..
Agreed that CaseMate is one of the best quality for cases. Which type would be good enough to withstand accidental drops? Rubber/Jelly/Hard Case?
Also, is there a suggested brand for the screen protectors? I require one that is scratch & fingerprint-resistant.
Read online that Matt-type protectors make the screen look dim! Is it true?
Thanks in advance,
Bharath K
Click to expand...
Click to collapse
For accidental drops, I've found TPU and Leather cases the best.
They stay on the phone after the phone drops.
Hard cases, either plastic(coloured type) or polycarbonate(transparent type) with pop off the phone when dropped.
Matte protectors are finger-print resistant but allows about 80%(just my guess....so dun sue me if found otherwise) of light to pass through.
Clear screen protectors allow almost all the light(99% my guess) to pass through from the screen output.
The worst is mirror screen protector which allows about 60%(my guess again) of light.
All the figures are based on the fact the screen brightness is at maximum n only an assumption.
So it all depends on ur requirements and needs.
Cheers !
I received my CM barely there today, and it fits perfect!
Screen guard
Any one using the screen guards availabe at flipkart.com (INDIA) ?
m.kochan10 said:
I received my CM barely there today, and it fits perfect!
Click to expand...
Click to collapse
Whats the price and where did u buy from. Pls post pics
Sent from my GT-I9103 using xda premium
zerocool_rkl said:
Any one using the screen guards availabe at flipkart.com (INDIA) ?
Click to expand...
Click to collapse
I was using the Rainbow one. It was good. I have 2 more left. XD. I switched it for the Capdase one when my case came.
Sent from my GT-I9103 using XDA App
m.kochan10 said:
Thanks a lot mate!
I've usually followed all steps you wrote but always some small piece of **** goes under the film and as a result I get unremovable bubble, so I don't trust those self-adhesive protectors. I've already used 5 of them (cheap **** between 2 and 7 USD) and never succeeded I've always had better luck with zagg's invisible shield, i mean those applicable with water.
Click to expand...
Click to collapse
Dude. All screen protectors are applicable with water. Its what I always do. No air bubbles.
Sent from my GT-I9103 using XDA App
I am also using the rainbow screen guards...Really good and serves the purpose well.
Sent from my GT-I9103 using XDA App
AbShake96 said:
I was using the Rainbow one. It was good. I have 2 more left. XD. I switched it for the Capdase one when my case came.
Sent from my GT-I9103 using XDA App
Click to expand...
Click to collapse
I am thinking to buy it in the next time.
AbShake96 said:
Dude. All screen protectors are applicable with water. Its what I always do. No air bubbles.
Sent from my GT-I9103 using XDA App
Click to expand...
Click to collapse
Sure you can apply water to everything...but some of protectors just won't work (known from my own experience)
Some of them are applicable with water some of them (mostly the cheapest) are not. I tried to apply the latter with water anyway...and they ended up in a thrash can
hapticc said:
Whats the price and where did u buy from. Pls post pics
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I bought it here
http://www.mytrendyphone.se/shop/samsung-i9103-galaxy-65699p.html
Nokia BH-505
I purchased this !!!
awesome sound quality, you will be lost
I am seeing a lot of screen protectors coming out on amazon, that are from small companies, was wondering if anybody has ever tried them and which one is the best one? Should I go try some of them out or wait for Zagg to come out of one of their own for the Moto Z/Z force?
Never felt like paying the premium for Zagg stuff; I've been using Skinomi protectors on my last three phones (it's the same material as Zagg/GadgetGuard etc). Have the TechSkin on my Z Force and it fits PERFECTLY, right up to the edge. Tried the MatteSkin once, but found it de-contrasted my screen way too much.
AngDR01D said:
I am seeing a lot of screen protectors coming out on amazon, that are from small companies, was wondering if anybody has ever tried them and which one is the best one? Should I go try some of them out or wait for Zagg to come out of one of their own for the Moto Z/Z force?
Click to expand...
Click to collapse
I have just ordered 4 or 5 of them from the small companies that I have never heard of. I'm planning to review them. They start arriving this weekend and my moto z arrives on Tuesday. Can't wait to get started as I tried the phone in BestBuy answer was really impressed.
emcdow said:
I have just ordered 4 or 5 of them from the small companies that I have never heard of. I'm planning to review them. They start arriving this weekend and my moto z arrives on Tuesday. Can't wait to get started as I tried the phone in BestBuy answer was really impressed.
Click to expand...
Click to collapse
Thanks! Leave a link here for the reviews to show other people which one to get as well!
emcdow said:
I have just ordered 4 or 5 of them from the small companies that I have never heard of. I'm planning to review them. They start arriving this weekend and my moto z arrives on Tuesday. Can't wait to get started as I tried the phone in BestBuy answer was really impressed.
Click to expand...
Click to collapse
Highly interested in what some thoughts are. Please post opinions.
Sent from my XT1254 using XDA Free mobile app
Well crap. I thought it was the Force that had the 2.5D screen edges. We aren't ever going to get a decent glass screen protector for this phone. My S7 was just like this and as popular as it is doesn't have a good glass screen protector.
Anybody tried Nillkin H+ Pro? They offer discount today.
http://nillkin.org/smartphones-acce...o-z-accessories/nillkin-motorola-moto-z-h-pro
olegfusion said:
Anybody tried Nillkin H+ Pro? They offer discount today.
http://nillkin.org/smartphones-acce...o-z-accessories/nillkin-motorola-moto-z-h-pro
Click to expand...
Click to collapse
I've ordered one... it seems a good product to me. Still waiting for it... :fingers-crossed:
enetec said:
I've ordered one... it seems a good product to me. Still waiting for it... :fingers-crossed:
Click to expand...
Click to collapse
Nice, I think I will order it too.:good:
olegfusion said:
Nice, I think I will order it too.:good:
Click to expand...
Click to collapse
Received today. Great package! It includes a protection for Moto Z back too. For free.
enetec said:
Received today. Great package! It includes a protection for Moto Z back too. For free.
Click to expand...
Click to collapse
how is the fit?
I wish I would have come across this thread before I bought the IQ Shield Tempered Glass protector. Clarity and feel are amazing but the edges don't seal!! It really grinds my gears.
Just bought a generic tempered glass (I highly doubt it is real tempered glass, maybe just some plastic). It is really cheap, not prone to fingerprints, and it makes the screen look great. Adhesion is nice, no abnormal lifts from the sides. Here are some pictures and the price tag.
I'm jealous, that seal looks perfect! I paid twice as much and mine is lifted on the left, right, and bottom edges.
treyy said:
how is the fit?
Click to expand...
Click to collapse
Installed today... The front screen protector is of good quality and attach perfectly on screen even if it is a bit small in size in all directions in my opinion. Great transparency and print resistance too...
The back one is like old screen protections and it's impossible to fit it without a lot of bubble...
Too much for me so I removed... It's a pity since it had a good print resistance too... that was really needed.
Anyone found a screen protector that covers the entire front?
enetec said:
Installed today... The front screen protector is of good quality and attach perfectly on screen even if it is a bit small in size in all directions in my opinion. Great transparency and print resistance too...
The back one is like old screen protections and it's impossible to fit it without a lot of bubble...
Too much for me so I removed... It's a pity since it had a good print resistance too... that was really needed.
Click to expand...
Click to collapse
Did you try a mod on the back with the screen protection on? Did it still work?
---------- Post added at 10:42 AM ---------- Previous post was at 10:29 AM ----------
nole4ever said:
Anyone found a screen protector that covers the entire front?
Click to expand...
Click to collapse
I bought this one and they claim full coverage.
https://www.amazon.com/gp/product/B01GUKLPRK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I get it and will install in on Monday. I can let you know.
corerwh said:
Did you try a mod on the back with the screen protection on? Did it still work?
---------- Post added at 10:42 AM ---------- Previous post was at 10:29 AM ----------
I bought this one and they claim full coverage.
https://www.amazon.com/gp/product/B01GUKLPRK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I get it and will install in on Monday. I can let you know.
Click to expand...
Click to collapse
Thanks!
corerwh said:
Did you try a mod on the back with the screen protection on? Did it still work?
Click to expand...
Click to collapse
Yes, with no problem at all... but I removed it because of bubbles....
corerwh said:
I bought this one and they claim full coverage.
https://www.amazon.com/gp/product/B01GUKLPRK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I get it and will install in on Monday. I can let you know.
Click to expand...
Click to collapse
Looking at the pic it seems so. :fingers-crossed:
nole4ever said:
Thanks!
Click to expand...
Click to collapse
So the link I posted last week, I realized that was for the Moto Z Force and I just have the Moto Z/Moto Z Droid. So I purchased this one and will be returning the other one.
https://www.amazon.com/gp/product/B01GUKL5W0/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Here are some photos to show how much it covers the phone: https://goo.gl/photos/fokxXnJzSq58zKAU6
I didn't get it on exactly perfect but if I did then I think it would have been pretty close to full coverage. I'm considering pull it off and replacing it. Also, I bought a full body protector so that I could put something on the back to protect from scratches and some finger prints. When I pulled it out and looked at it before applying it to the phone then I noticed there was no hole for the gold connection pins to pass through. I was very disappointed. Here is a link to the full body protector.
https://www.amazon.com/gp/product/B01GUKL5Y8/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
I am unable to find a suitable screen guard for max pro m1, if any member has found one then please reply with the link of product. I had already bought one online from Flipkart but it doesn't stick from the sides , which makes it look terrible. Please help.
Abby 244 said:
I am unable to find a suitable screen guard for max pro m1, if any member has found one then please reply with the link of product. I had already bought one online from Flipkart but it doesn't stick from the sides , which makes it look terrible. Please help.
Click to expand...
Click to collapse
It is because of 2.5 D glass on the phone. You will get an halo effect.
There are videos demonstrating using oil to remove this effect but that might cause issue with mic if oil enters there accidentally so better keep it as is.
.A.V.i.n.a.S.h. said:
It is because of 2.5 D glass on the phone. You will get an halo effect.
There are videos demonstrating using oil to remove this effect but that might cause issue with mic if oil enters there accidentally so better keep it as is.
Click to expand...
Click to collapse
I did see those videos and to be honest found those to be stupid . I am seeking for a more prominent method to save my screen. P. S. What are you using to safeguard your mobile's screen?
Abby 244 said:
I did see those videos and to be honest found those to be stupid . I am seeking for a more prominent method to save my screen. P. S. What are you using to safeguard your mobile's screen?
Click to expand...
Click to collapse
Totally agree .. putting oil on your phone is kinda dumb.
I use https://www.flipkart.com/flipkart-s...CCF4GCKGV6ZSZQY&lid=LSTACCF4GCKGV6ZSZQYQVVCSB which I brought along with the phone.
It has the halo effect ( edges not sticking to the screen ) but I got used to it.
Technically .. flat screen protector is better as it does not have weak edges .. screen protector which is curved on the edges will have weak points. So I will keep using this one.
No screenguard + flip cover is the way 2 go. Wonder why u idiots are so into this screen protector. There are many videos / articles bothfor and against these dumb add-ons. Ergo, go without, but have something 2 cover/ protect the screen, when not in use.
You can try this website https://www.gadgetshieldz.com/?currency=INR
They have m1 screen protector.
I think 5D screen protector is needed for our phone to get front protected perfectly... There are 5D tempered glass for other phones out there... i really wish some manufacture make one for our wonderful phone too...
Cookie Ninja said:
No screenguard + flip cover is the way 2 go. Wonder why u idiots are so into this screen protector. There are many videos / articles bothfor and against these dumb add-ons. Ergo, go without, but have something 2 cover/ protect the screen, when not in use.
Click to expand...
Click to collapse
Well we idiots like these dumb add ons as they protect the screen of a device from scratches , without making the device bulky unlike WOMEN CLUTCHES looking flipcovers . You can change a screen guard after every 2-3 months but you cannot get your screen replaced after every 2-3 months . I use my device for atleast 8 months and don't like to see a scratched screen , thus a screen protector is must for my device .
Anyways thanks for your eye-opening advice. Now I understand all these tech giants like Samsung , oneplus , honor etc . simply loot us by providing expensive screen guards.
Well I am using mi note 5 pro screen guard on my mobile as it fits perfect .
Give it a try .......
piku2008 said:
Well I am using mi note 5 pro screen guard on my mobile as it fits perfect .
Give it a try .......
Click to expand...
Click to collapse
No halo effect on sides!?? Please share the link if possible. :fingers-crossed:
Abby 244 said:
No halo effect on sides!?? Please share the link if possible. :fingers-crossed:
Click to expand...
Click to collapse
Well till now there is no halo effect .... its working perfectly fine .
Before this I have tried to order screen guard from flipkart but that screen guard was comparatively small then the current screen size of the mobile so I just visited a local mobile vendor and got a mi note 5 pro screen guard which covers the whole screen without any halo effect ......
So give it a try
piku2008 said:
Well till now there is no halo effect .... its working perfectly fine .
Before this I have tried to order screen guard from flipkart but that screen guard was comparatively small then the current screen size of the mobile so I just visited a local mobile vendor and got a mi note 5 pro screen guard which covers the whole screen without any halo effect ......
So give it a try
Click to expand...
Click to collapse
Thanks for the information, will try it soon.
Can you post a picture of your mobile , as for Note 5 Pro there are several types of screen guards available , I too am using a N5 pro screen guard as of now and it is giving Halo effect.
Abby 244 said:
I am unable to find a suitable screen guard for max pro m1, if any member has found one then please reply with the link of product. I had already bought one online from Flipkart but it doesn't stick from the sides , which makes it look terrible. Please help.
Click to expand...
Click to collapse
Try gadgetshieldz screen guard. It is a bit complex to apply as it is a wet type screen guard. It is on a bit of expensive side but totally worth it. It is self healing and the screen guard itself doesnt need a replacement. I found it really good and only screen guard for my galaxy s7 edge.
It feels a bit like a silicon surface and obviously there is no halo effect. If you manage to get it right, trust me you wont need to remove it until you discard your phone. Mine is on my phone for more than a year and it is almost new.
akash220 said:
Try gadgetshieldz screen guard. It is a bit complex to apply as it is a wet type screen guard. It is on a bit of expensive side but totally worth it. It is self healing and the screen guard itself doesnt need a replacement. I found it really good and only screen guard for my galaxy s7 edge.
It feels a bit like a silicon surface and obviously there is no halo effect. If you manage to get it right, trust me you wont need to remove it until you discard your phone. Mine is on my phone for more than a year and it is almost new.
Click to expand...
Click to collapse
By screen guard you mean tempered glass,right?
Btw, there's sale going on gadgetshieldz(10% off).
Mr.Ak said:
By screen guard you mean tempered glass,right?
Btw, there's sale going on gadgetshieldz(10% off).
Click to expand...
Click to collapse
They are not tempered glass. They are wet type screen protectors. Watch on youtube what wet screen protectors are. They are plastic+silicone tear resistant and self healing. And they are a lot more difficult to apply than a normal screen protector. I guess rhino shield has a similar product or invisible shield sells these kind of protectors abroad. Gadgetshieldz is Indian brand. Even their skinnova skins are awesome quality wise. Tried a lot of skins from ebay and other sellers, but found them and I'm satisfied.
Please, I'm not associated with them but I have tried their products. They seem to be on higher side but quality wise, they offer the best among all options available in India.
akash220 said:
They are not tempered glass. They are wet type screen protectors. Watch on youtube what wet screen protectors are. They are plastic+silicone tear resistant and self healing. And they are a lot more difficult to apply than a normal screen protector. I guess rhino shield has a similar product or invisible shield sells these kind of protectors abroad. Gadgetshieldz is Indian brand. Even their skinnova skins are awesome quality wise. Tried a lot of skins from ebay and other sellers, but found them and I'm satisfied.
Please, I'm not associated with them but I have tried their products. They seem to be on higher side but quality wise, they offer the best among all options available in India.
Click to expand...
Click to collapse
But does this wet type protector protects the screen from a fall?
Mr.Ak said:
But does this wet type protector protects the screen from a fall?
Click to expand...
Click to collapse
I don't think so. It won't do much. I haven't dropped my s7 yet to test that but I think it won't do much. I love this for no hallo effects on my screen and no scratches. For drops, a protective case is what I recommend.
Generally what I do is apply this on screen for scratches, a skinnova skin on back and then a ringke fusion transparent case. I find the phone beautiful to look at and secure too, but I have rarely dropped my phone. Honestly I have booked my zenfone, ordered that shield protector, and now just looking for a good case to go along with a skin.
i think this is the one we're looking for
Hey check this out,
but i don't see any possible shipping methods to India
http://dlix.manufacturer.globalsour...ull-Cover-Tempered-glass-Screen-Protector.htm
akash220 said:
They are not tempered glass. They are wet type screen protectors. Watch on youtube what wet screen protectors are. They are plastic+silicone tear resistant and self healing. And they are a lot more difficult to apply than a normal screen protector. I guess rhino shield has a similar product or invisible shield sells these kind of protectors abroad. Gadgetshieldz is Indian brand. Even their skinnova skins are awesome quality wise. Tried a lot of skins from ebay and other sellers, but found them and I'm satisfied.
Please, I'm not associated with them but I have tried their products. They seem to be on higher side but quality wise, they offer the best among all options available in India.
Click to expand...
Click to collapse
can we use the wet method on our phone? Our phone is not water resistant...
ujilraj said:
can we use the wet method on our phone? Our phone is not water resistant...
Click to expand...
Click to collapse
That's why they recommend soap water. A bit of water resistance comes with every phone. I have used it on s7 edge, mi a1 and iPhone 6 and nothing happened. I recommend going through the installation process which they recommend strongly aswell. The phone is yours and the decision too, since someone asked, I just recommended them, since I find the product really good and most importantly with no hollow effect on sides.
Update :
Go to page 3, i included some photos + black silicone case
Samsung Clear Cover Note 9 Transparent
FYI..
Actually samsung did it with Note9, found it by luck in one of our local online stores here in Dubai. I don't think its available on Amazon anywhere (US, UK & CANADA) YETTTT...
Sharing it here so if others are interested, they can keep an open eye around waiting for it.
This is mostly a plastic snap on case, not a tpu.
Ordered it, & i didn't receive it yet, will update this upon receiving it. If any is interested.
The local online store doesn't ship internationally, so am not sharing it here.
I want this. Keep me updated OP
I’m really looking forward to this case. It is the only one of the official cases that appears to be out of stock everywhere. I had this hard case for my Note 8 and even though it doesn’t seem to offer that much protection it provides a perfect grip and make the withd of the phone ideal to not slip at all from the hand.
Doesnt it come with the phone?
Bolardito2912 said:
I’m really looking forward to this case. It is the only one of the official cases that appears to be out of stock everywhere. I had this hard case for my Note 8 and even though it doesn’t seem to offer that much protection it provides a perfect grip and make the withd of the phone ideal to not slip at all from the hand.
Click to expand...
Click to collapse
Exactly why am getting it, had it also for the note8, specially if you skin your phone with a nice color.. Will update the post once i receive it..
kebabs said:
Doesnt it come with the phone?
Click to expand...
Click to collapse
What comes with the phone is a tpu cover, this one is hard plastic with a very thin profile and the best grip..
My note 8 came with the hard plastic case like that which you described.
Amjad.AbdulGhani said:
this one is hard plastic with a very thin profile and the best grip..
Click to expand...
Click to collapse
The product's package says it is soft?
civciv said:
The product's package says it is soft?
Click to expand...
Click to collapse
Will find out when i receive it tomorrow.. Looks hard plastic though..
I found this on eBay,a 10-pack of unbranded clear PC cases for less than $15:
https://www.ebay.com/itm/10-Pack-Wh...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
Mobilefun.com will have this case in stock soon, and you can pre order, for what it's worth.
Sent from my SM-N960U using Tapatalk
I've bought it today. It looks very nice and slim. Of course it fits like glove. It has a grippy feeling which is good for me. And it is soft not a hard case. I'm glad I've bought it Hope it does not turn to yellow soon.
Could you please upload some pictures? I wonder if it is the same case that came in the box ?
Looks like they tinted it slightly blue/gray which should reduce the yellowing effect.
I want the hard plastic case like they had for the Note 8. Felt like you didnt even have a case on it. Oh well.
Semantics said:
I want the hard plastic case like they had for the Note 8. Felt like you didnt even have a case on it. Oh well.
Click to expand...
Click to collapse
I bought this generic one on 8/15, it delivered today:
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/292656916441
Real nice fit, ultra slim profile & no rainbow effect.
FWIW, it does not have the raised corners (or any raised edges) like the PC OEM Case for the Note 8.
Protection is as minimal as it gets, top & bottom are fully exposed, oversized cutouts for the buttons.
IMHO, perfect......
@Semantics
EDIT:
Seems the selller has updated/substituted what I purchased.
The one in the link is not what I have,SMH,sorry about that........
@Semantics
EDIT #2
Here's one that closely resembles what I ordered:
https://www.ebay.com/itm/Galaxy-Not...-Cover-Clear/163216970699?hash=item26007d53cb
It has a bit more coverage,but,the buttons are still cut out,vs the protuding button coverage on most cases.
Yeah,a bit pricier than the one I originally linked,but,it's cheaper than the OEM Samsung one & actually available now.
Sent from my SM-N960U using XDA Labs
KOLIOSIS said:
I found this on eBay,a 10-pack of unbranded clear PC cases for less than $15:
Click to expand...
Click to collapse
Some one say group buy? :laugh:
civciv said:
I've bought it today. It looks very nice and slim. Of course it fits like glove. It has a grippy feeling which is good for me. And it is soft not a hard case. I'm glad I've bought it Hope it does not turn to yellow soon.
Click to expand...
Click to collapse
That will be a waste of money on my side, as my phone already came with the tpu clear case.. Will see when i revive it..
Amjad.AbdulGhani said:
That will be a waste of money on my side, as my phone already came with the tpu clear case.. Will see when i revive it..
Click to expand...
Click to collapse
You wll have a spare one when the included one turns yellow
Howdy XDA,
As the new #Pixel4 was announced today we are already in production of Pixel 4 screen protectors. We hit it out of the park this time with full coverage, 3D, and full glue models.
As always, we have a special deal just for XDA where you can get 50% any Pixel 4 or Pixel 4 XL screen protector, just use coupon code Pixel4Sale.
Any thoughts or concerns, just let us know as always and we'll take care of you.
Thanks!
intelliARMOR
intelliARMOR said:
Howdy XDA,
As the new #Pixel4 was announced today we are already in production of Pixel 4 screen protectors. We hit it out of the park this time with full coverage, 3D, and full glue models. ...
Click to expand...
Click to collapse
Is the PRO in this link Full adhesive?
blcklab said:
Is the PRO in this link Full adhesive?
Click to expand...
Click to collapse
Yes - full adhesive on both models. And 3D glass
Are the cutouts actual holes, or clear glass? I've had proximity sensor issues in the past, and am concerned about that an issues for the radar sensors.
Ordered one for the XL. Hopefully it is as good as your old school flat screen phone models.
So the tempered glass you're making are going to only be like the picture above? I'm not a fan of tempered glass where is just sticky around the edges. Are you making regular ones too?
Sent from my [device_name] using XDA-Developers Legacy app
skyman631 said:
Are the cutouts actual holes, or clear glass? I've had proximity sensor issues in the past, and am concerned about that an issues for the radar sensors.
Click to expand...
Click to collapse
Yes, we have cutouts - no issues with proximity sensors
MRFERRARI23 said:
So the tempered glass you're making are going to only be like the picture above? I'm not a fan of tempered glass where is just sticky around the edges. Are you making regular ones too?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yes, our glass is full adhesive. We are not fans of the ones with sticky around the edges either.
If it's full glass adhesion, why the black trim?
dmarden said:
If it's full glass adhesion, why the black trim?
Click to expand...
Click to collapse
The black trim is 3D molded to accommodate the Pixel's curved screen. The full adhesion gives superior performance and feel over models without.
Thanks!
Do you have a retailer in Europe?
okay, ordered, what the hey-..
I've learned the hard way.. gotta protect the screen asap.
I had an intelliglass on my pixel Xl. .that was fine..
but curved edges was a disaster on the pixel 2xl..
lets see what the pixel 4 xl is like.. (totally skipped pixel 3.. i was notchblocked)
been a fan since nexus 6p days. Will you be making a blue light version? also way some other company have a installation tray for align not sure how useful one would be to have precise install.
Looking forward to getting on my pixel 4 xl when i order!
intelliARMOR said:
The black trim is 3D molded to accommodate the Pixel's curved screen. The full adhesion gives superior performance and feel over models without.
Thanks!
Click to expand...
Click to collapse
Well, I ordered two of them... will hope for the best. Thanks!
Robati said:
Do you have a retailer in Europe?
Click to expand...
Click to collapse
I have been looking but not found anything. Looking to get one delivered to the UK.
dmarden said:
Well, I ordered two of them... will hope for the best. Thanks!
Click to expand...
Click to collapse
I believe you will be quite happy with the design
xxnoelziexx said:
I have been looking but not found anything. Looking to get one delivered to the UK.
Click to expand...
Click to collapse
We have some distribution in Europe, but no retailer in the UK yet. If you can tell us the retailer you'd prefer we can work on getting them setup.
This is stellar. Actual interaction with a product distributor, rather than just ordering something, hoping it works out and if it doesn't, moving on to the next protector without actually having any realtime knowledge of the product ? I got burned so many times with OP protectors, this is quite appealing. Think I'm gonna grab a couple friday, along with the spigen crystal clear case. That will be a killer setup. It will be...oh so badass ?
ZeroKool76 said:
This is stellar. Actual interaction with a product distributor, rather than just ordering something, hoping it works out and if it doesn't, moving on to the next protector without actually having any realtime knowledge of the product I got burned so many times with OP protectors, this is quite appealing. Think I'm gonna grab a couple friday, along with the spigen crystal clear case. That will be a killer setup. It will be...oh so badass
Click to expand...
Click to collapse
You bet! That's one of the reasons we love XDA, we can speak directly to our customers. Also, we have a satisfaction guarantee, so if you are not happy with any of our products you can just let us know and we'll take care of you. :good:
Ordered.