Related
Hello, I have a soft bricked (hopefully thats the case) Samsung Galaxy S6 SM-G920F xme region (Malaysia) with android 6.0.1 latest stock rom.
It started when my device suddenly restarted and got stuck at the samsung logo (first screen).
I am able to boot it into Download Mode, tried reflashing with a fresh stock rom MM 6.0.1 with odin, flashing proccess was completed with no fail but it still stuck at the same screen.
I can't even boot into recovery mode so i can't wipe the cache partition, i noticed the Reactivaction Lock status is ON, i suspect that might be the culprit?
The things i tried so far:
1- Reflash with the latest stock firmware. Ticking the NAND erase all and repartition it with pit file also didn't work.
2- Samsung Smart Switch and Kies3. Flash completed but no effect.
3- Flashing any recovery files returns with "Custom binary(recovery) Blocked by R/L".
4- Sent it to my nearest Samsung service centre, they did try to repair it but only to be told that my S6 need a new motherboard the next day, which is out of my budget limit. But i am still hoping to find some other way to fix it, i believe this is just a "soft-brick" not a hard brick device.
Ideas guys? thanks.
Try to re flash stock odin firmware with erase all ticked ok ,
Good luck ,,
thereassaad said:
Try to re flash stock odin firmware with erase all ticked ok ,
Good luck ,,
Click to expand...
Click to collapse
Already tried that, still no luck..
mrkage said:
Hello, I have a soft bricked (hopefully thats the case) Samsung Galaxy S6 SM-G920F xme region (Malaysia) with android 6.0.1 latest stock rom.
It started when my device suddenly restarted and got stuck at the samsung logo (first screen).
I am able to boot it into Download Mode, tried reflashing with a fresh stock rom MM 6.0.1 with odin, flashing proccess was completed with no fail but it still stuck at the same screen.
I can't even boot into recovery mode so i can't wipe the cache partition, i noticed the Reactivaction Lock status is ON, i suspect that might be the culprit?
Ideas guys? thanks.
Click to expand...
Click to collapse
Try Samsung Smart Switch, it has some recovery features that can automate the process for you.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Droidriven said:
Try Samsung Smart Switch, it has some recovery features that can automate the process for you.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
Thank you for taking a look at my problem here, i forgot to mention that i did try Samsung Smart Switch and Kies3, both managed to succesfully flashed the stock firmware, it reboots my device and still stuck at the same first screen.
mrkage said:
Thank you for taking a look at my problem here, i forgot to mention that i did try Samsung Smart Switch and Kies3, both managed to succesfully flashed the stock firmware, it reboots my device and still stuck at the same first screen.
Click to expand...
Click to collapse
I believe it is doing that because you have a locked bootloader. Normally that shouldn't be a problem unless you're trying to flash a firmware that is older than what you had.
What stock firmware version/build number did your device have? What firmware version/build number is what you are flashing? If what you're flashing is older it might be downgrading your bootloader, bootloader can't be downgraded on most locked bootloader Samsung devices these days.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Droidriven said:
I believe it is doing that because you have a locked bootloader. Normally that shouldn't be a problem unless you're trying to flash a firmware that is older than what you had.
What stock firmware version/build number did your device have? What firmware version/build number is what you are flashing? If what you're flashing is older it might be downgrading your bootloader, bootloader can't be downgraded on most locked bootloader Samsung devices these days.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
Don't remember the build number, but it was a 6.0.1 firmware, i flashed it with the same stock firmware version.. but maybe the build number didn't match.
I read somewhere about the engineering bootloader, i know it is not so easy or even possible at the moment to find one for my current firmware version, but let's say if i have it, will it be possible for me to use it to remove the RL on my device?
mrkage said:
Don't remember the build number, but it was a 6.0.1 firmware, i flashed it with the same stock firmware version.. but maybe the build number didn't match.
I read somewhere about the engineering bootloader, i know it is not so easy or even possible at the moment to find one for my current firmware version, but let's say if i have it, will it be possible for me to use it to remove the RL on my device?
Click to expand...
Click to collapse
Did you flash a firmware from a different g920 series device? Or did you flash the firmware for your specific model number and your and carrier?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Droidriven said:
Did you flash a firmware from a different g920 series device? Or did you flash the firmware for your specific model number and your and carrier?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
Only did for my specific model number and carrier
mrkage said:
Only did for my specific model number and carrier
Click to expand...
Click to collapse
Let me backtrack. Do you know if USB debugging is on?
Did you flash TWRP with a locked bootloader before this happened? Is that what caused the issue?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Droidriven said:
Let me backtrack. Do you know if USB debugging is on?
Did you flash TWRP with a locked bootloader before this happened? Is that what caused the issue?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
USB debugging and Developer Mode was never turned on that device.
Negative, i did try flashing TWRP but it was after it got stuck at the logo screen and only able to boot into Download Mode, the flashing came back failed with "Custom Binary (recovery) Blocked by RL" message.
Flashing it with the latest stock recovery i found online also gave me the same error message.
mrkage said:
USB debugging and Developer Mode was never turned on that device.
Negative, i did try flashing TWRP but it was after it got stuck at the logo screen and only able to boot into Download Mode, the flashing came back failed with "Custom Binary (recovery) Blocked by RL" message.
Flashing it with the latest stock recovery i found online also gave me the same error message.
Click to expand...
Click to collapse
Just out of curiosity, have you tried booting to safe mode? If any of the apps that you installed before this happened were causing an issue or bootloop before you flashed are still there, it/they could still be causing the bootloop. Remember, I said that it doesn't wipe data unless you are upgrading or downgrading bootloader/baseband, what you flashed wasn't an upgrade or a downgrade so your data is there. Boot to safe mode and disable/uninstall the apps that might be causing the issue.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Droidriven said:
Just out of curiosity, have you tried booting to safe mode? If any of the apps that you installed before this happened were causing an issue or bootloop before you flashed are still there, it/they could still be causing the bootloop. Remember, I said that it doesn't wipe data unless you are upgrading or downgrading bootloader/baseband, what you flashed wasn't an upgrade or a downgrade so your data is there. Boot to safe mode and disable/uninstall the apps that might be causing the issue.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
Didn't try that... but nevermind. I accidentally damaged my screen while trying to dissasemble it last night, a very stupid mistake from me.
Thank you for trying to help me mate. Forum mods can close this thread now. Thanks all.
problem
i have too but with A/L
My Fried gave this phone to me (SM-N915G) which is stuck at Powered by Android, and told me to fix it.
He said that when he update to MM from LP without KIES or Odin, the phone suddenly restarted and stuck there getting HOT
He had no experiece to repair it so he asked me to fix it.
So for 3 days lately, i have tried many ways to fix it but wihout any progress, as follow :
1. Flashing Official MM wby using Odin -> still stuck
2. Downgrading Flash Official LP using Odin -> still stuck
3. Installed TWRP, and flasing CFW Micky387_MM_V3.0 for 915F/FY/G (flashing Bootloader and modem as required) -> still stuck with set warranty bit : kernel
4. After Flashing Micky CFW and Failde, i try to flash Emotion Kernel -> still stuck with Kernel is Seandroid Enforcing
5. Redoing Flash Micky CFW with other CSC -> Still Stuck (even i tried with 915F and 915FY as in the aroma installer)
6. Never failed during flash procedure with Odin or TWRP, everything is smooth
7. When stuck, the device is getting Hot slowly but and when left as long as 15 minutes, the HH is getting HOT (TWRP read 72 degree at most)
**Update
8. Tried using Official SmartSwitch sucessfully but the result is still the same -> Still Stuck and getting hot as usual T.T
Last Download Mode status is :
Odin Mode (High Speed)
Product name: SM-N915G
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: Off
Knox warranty void: 0x1 (2)
Quallcomm secureboot : Enable (CSB)
RP SWREV: S1, T1, R1, A1, P1
Secure Download: Enable
UDC START
I am now thinking, should i flash another Kernel or PIT or Bootloader? but i still cant decide what to do next to revive this Phone
Please help, any suggestion is greatly appreciated, thank you.
Please give some help, thank you.
Help Please anyone?
This is Hard Brick or Soft Brick?
Any suggestion or Opinion please
Thank you
wingz17 said:
Help Please anyone?
This is Hard Brick or Soft Brick?
Any suggestion or Opinion please
Thank you
Click to expand...
Click to collapse
Have you tried a reinstall using KIES?
The Radius Kid said:
Have you tried a reinstall using KIES?
Click to expand...
Click to collapse
Yes i have try to recover but not using KIES, but using smartswitch...
Is it diffrent by using KIES or SmartSwitch?
Thank you.
wingz17 said:
Yes i have try to recover but not using KIES, but using smartswitch...
Is it diffrent by using KIES or SmartSwitch?
Thank you.
Click to expand...
Click to collapse
I can tell you that Kies and NOT Kies 3 was what worked for me when I downloaded/installed Marshmallow from Samsung's website.
Figure that one out.
That was also using a 64 bit version of Windows 7 Pro.
The Radius Kid said:
I can tell you that Kies and NOT Kies 3 was what worked for me when I downloaded/installed Marshmallow from Samsung's website.
Figure that one out.
That was also using a 64 bit version of Windows 7 Pro.
Click to expand...
Click to collapse
Thank you for the suggestion,
I will try that one out and let you know.
wingz17 said:
Thank you for the suggestion,
I will try that one out and let you know.
Click to expand...
Click to collapse
The Radius Kid said:
I can tell you that Kies and NOT Kies 3 was what worked for me when I downloaded/installed Marshmallow from Samsung's website.
Figure that one out.
That was also using a 64 bit version of Windows 7 Pro.
Click to expand...
Click to collapse
Sorry For the long response, i have tried flasing using KIES but still stuck on the android, and no progress.
Right now i am run out of option, please help, thank you.
wingz17 said:
Sorry For the long response, i have tried flasing using KIES but still stuck on the android, and no progress.
Right now i am run out of option, please help, thank you.
Click to expand...
Click to collapse
I'm going to guess that you've tried installing MM using Kies directly from Sammobile?
If so,have you tried turning off your computer's antivirus when you download/install?
It sounds like the bootloader is looking for something and can't find it.....kind of like what happened to me when I totally ripped KNOX out of my phone.
Restore time!
Good thing I did CWM backups.
In your case,your computer's anti virus could be seeing something in the download and ripping it out.
I've seen my browsers do that when I download stuff....pain in the....
Have you tried a different battery?
Maybe a search of the forums to see if anyone else has had this problem and solved it?
I kind of remember seeing something like this a while back.
The Radius Kid said:
I'm going to guess that you've tried installing MM using Kies directly from Sammobile?
If so,have you tried turning off your computer's antivirus when you download/install?
It sounds like the bootloader is looking for something and can't find it.....kind of like what happened to me when I totally ripped KNOX out of my phone.
Restore time!
Good thing I did CWM backups.
In your case,your computer's anti virus could be seeing something in the download and ripping it out.
I've seen my browsers do that when I download stuff....pain in the....
Have you tried a different battery?
Maybe a search of the forums to see if anyone else has had this problem and solved it?
I kind of remember seeing something like this a while back.
Click to expand...
Click to collapse
Thank you for the response,
I was using KIES 2.64 that downloaded from Samsung website to fix the phone as your suggestion (tools->firmware upgrade and initialisation) but still fail to fix it.
Nope, the antivirus still active when KIES download the FW and Flash it into the phone, but it is new to me that antivirus will intercept ongoing dowloaded files, if so i think the antivirus will give some notification or warning about the content of the file that being downloaded and in my case, my antivirus is still cool and no notification whatsoever.
The bad thing is i do not have any cwm backup and since this is my friend phone and not mine, well... we dont have any backup for this phone.
Regarding the battery, i admit that i havent try other battery, since i dont see any connecton between it, in my opinion, the phone works well, the charging animation working, and no sign of weak battery... but i will try to do it if i can get some other battery
I have surfed many forums and websites, but almost 90% can be fixed with simple flashing from odin or just by clearing up cache and data from recovery.
Other that that, wither, no one respond to the problem, or just some discussion without conclusion, really frustrating.
I even go further to read about android booting sequence to identify whats wrong with the boot sequence, but still confused...
But i have some question if you would to answer :
1 . Stuck at Android logo, bootloader or kernel problem?
2 . Is it possible that one of the mainboard chip that have some part in booting process is malfunctioning? But if so, the phone will be dead bricked right?
3. How about the booting process is halted due some hardware failure? ex : some chip (other than chip that have part in booting process) is bad and so the bootloader init is halted
4. The Worst guess, is it possible that the phone is fake? (the serial number behind the baterry is accepted by kies though)
Thank you very much, you are the only one who still response to my problem. :good:
As it seems you use the wrong Bootlaoder. Is his phone N915P or N915G? When you flash N915G Bootloader to N915P, it will not boot but the bootloader will work correctly. Try to flash the N915P bootloader.
I have N915FY phone but did not know first if I had N915F or FY. I flashed the N915F bootloader version, which flashed successfully, but was not booting. Bootloader said that my phones model is N915F. After flashing the FY Bootloader version, it successfully booted to system.
Bordo_Bereli51 said:
As it seems you use the wrong Bootlaoder. Is his phone N915P or N915G? When you flash N915G Bootloader to N915P, it will not boot but the bootloader will work correctly. Try to flash the N915P bootloader.
I have N915FY phone but did not know first if I had N915F or FY. I flashed the N915F bootloader version, which flashed successfully, but was not booting. Bootloader said that my phones model is N915F. After flashing the FY Bootloader version, it successfully booted to system.
Click to expand...
Click to collapse
Thank you for the Response,
First, his phone is N915G (according to the box and the information in the battery compartment)
(Really sorry for the mistake i made at the thread title)
And regarding bootloader, that is also my concern at first, i think maybe i was flasing wrong region and bootloader, and so i search the way to find out the real version of the phone, but after trying many ways described on the net (by imei or serial number) , i still cannot found out the way.
But one instance when i try using KIES, and KIES asked for the version and serial number when device upgrade and initialisation, i entered the exact version and serial number that is found behind the phone in battery compartment. KIES immediately confirms that the version and serial number is valid, (i still wonder though, is KIES check it online at Samsung server or there are some serial number database embedded in the KIES) and continue to run trough the official fw download and installation by KIES but at the end still no success.
Is it possible that the version and serial number is wrong ? if so, how to determine the correct one?
and is it safe to try flasing another bootloader?
Thank you very much
Hello, there is no bootloader related to serial number or something. There are different bootloaders for different models and android version. When you flash MM-Version, you need to be sure that you use the right bootloader and baseband files for MM. If you flash different region-locked firmware/bootloader, it will not affect btw. not solve the boot-stuck problem.
http://samsung-updates.com/device/?id=SM-N915G Try to flash 6.0.1 firmware that is related to your region if you still want to try to flash different region-firmware.
Maybe download the XSA 6.0.1 Firmware with the pit file XSA http://gsm-firmware.com/index.php?a=browse&b=file-info&id=15892.
Then flash XSA 6.0.1 and TBLTE_SEA_XSA.pit together in odin. Under Odin 3 V3.12 ticke the re-partition at option-tab and select TBLTE_SEA_XSA.pit under pit-tab.
Bordo_Bereli51 said:
Hello, there is no bootloader related to serial number or something. There are different bootloaders for different models and android version. When you flash MM-Version, you need to be sure that you use the right bootloader and baseband files for MM. If you flash different region-locked firmware/bootloader, it will not affect btw. not solve the boot-stuck problem.
http://samsung-updates.com/device/?id=SM-N915G Try to flash 6.0.1 firmware that is related to your region if you still want to try to flash different region-firmware.
Maybe download the XSA 6.0.1 Firmware with the pit file XSA http://gsm-firmware.com/index.php?a=browse&b=file-info&id=15892.
Then flash XSA 6.0.1 and TBLTE_SEA_XSA.pit together in odin. Under Odin 3 V3.12 ticke the re-partition at option-tab and select TBLTE_SEA_XSA.pit under pit-tab.
Click to expand...
Click to collapse
Thanks for the reply!
Although there is no bootloader related to serial number, but if we put the serial number in KIES, it will identify what CSC and region, which can be use as a guide to choose the correct FW or let KIES do the Flashing according to the inputted serial number, and as long as the serial number is correct one, that is my opinion but please CMIIW.
When flashing MM, if i use the MM that has been downloaded, the bootloader and baseband is included in the MM image right? or shouuld i flash it separately?
i have tried your suggestion but with no sucess, i have dowloaded the PIT and the FW, flash it trough odin which was sucess, but still stuck.
I do not tick auto restart at Odin, so i manually restart the phone, but i encounter an event which at 20% installing system update (below the greed droid guy) the progress bar is vanished and replaced with erasing, and after that the phone stuck again at the same spot.
Do you have any idea why?
Thank you very much.
Just thinking, should i erase the NAND in ODIN?
If so, how to restore it?
I think that if i backup the NAND using custom recovery and restore it later, it just bring back the same problem, if the NAND causing all this.
Do anyone have some NAND backup that i could use? or any other suggestion?
Thank you
Can you boot to recovery? if yes, try to wipe data and cache.
If it still not working, try to backup your efs with a custom recovery (ex. TWRP), or better the entire System like data, system, boot, efs, modem and save it to your computer.
After saving the backup, try to flash the firmware with pit file while checked NAND erase all.
When its finished and your device boots up, you can flash back your custom recovery and recover only the efs-partition.
If its not working, then there is maybe problems with your eMMC. But be aware using nand erase all. It is the last riskfully option left after trying several things.
I have a backup of my resurrection rom. If you want it I can upload it.
Hi all,
I'm having a nightmare of a time with my Galaxy S7... For some unknown reason I decided to root my phone about 2 months ago using CF Auto Root.. worked great.. This morning, was having bad lag issues, so I restarted the phone.. as soon as the Samsung logo came up, I got a red message at the top of the screen saying "Custom Binary locked by FRP".. kind of freaked out and booted the phone into Recovery mode.. wiped Cache and wiped phone (to go back to factory setting I guess).. restarted... since then, I had no boot.. it did loop for a while as I was trying to charge the phone.. but that's it.
Now, the only way the phone will power on is if I plug it into my computer in Download Mode. I am trying to flash the ROM, custom or stock, but Odin fails almost as soon as it starts the sboot.bin and the phone screen shows "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 6, BINARY: 1".. Also, When I try to power on the phone, it HAS to be plugged in to my computer or charger cable and it just loops with a message at the top of the screen.
I can't do anything with this phone and cant find any solutions online... please help! :crying:
PM me for images of all screens please
I had the some problem while playing with my handset I switched off OEM unlock for some reason under developer option..
Next time i reset my handset it stuck on that warning
You need to download combination file, flash it with odin, then unlock developer mode, toggle OEM unlock, than flash back your current firmware, or if you have full twrp back up restore it
JayMor81 said:
Hi all,
I'm having a nightmare of a time with my Galaxy S7... For some unknown reason I decided to root my phone about 2 months ago using CF Auto Root.. worked great.. This morning, was having bad lag issues, so I restarted the phone.. as soon as the Samsung logo came up, I got a red message at the top of the screen saying "Custom Binary locked by FRP".. kind of freaked out and booted the phone into Recovery mode.. wiped Cache and wiped phone (to go back to factory setting I guess).. restarted... since then, I had no boot.. it did loop for a while as I was trying to charge the phone.. but that's it.
Now, the only way the phone will power on is if I plug it into my computer in Download Mode. I am trying to flash the ROM, custom or stock, but Odin fails almost as soon as it starts the sboot.bin and the phone screen shows "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 6, BINARY: 1".. Also, When I try to power on the phone, it HAS to be plugged in to my computer or charger cable and it just loops with a message at the top of the screen.
I can't do anything with this phone and cant find any solutions online... please help! :crying:
PM me for images of all screens please
Click to expand...
Click to collapse
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
cooltt said:
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
Click to expand...
Click to collapse
Dammit.. I tried to put as much detail as possible in there lol.. obviously I forgot some.. My mistake the Galaxy s7 that I am using is a Rogers Mobile (Canada) SM-G930W8. As for not signing out before modification, omfg, that makes perfect sense.. didn't even think of doing that before rooting.. I appreciate the help!! I will give this a go and see what outcome I get.. Thanks!
[/COLOR]That was nice of you to respond so helpfully, despite you having seen the scenario posted over and over.
cooltt said:
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
Click to expand...
Click to collapse
Can't make or receive calls
Please I need help my I rooted my S7 (flat) flashed the original OS with odin Installed Twrp flashed Andriod 9 and since then I can't make or receive calls wifi seems fine. Someone please come to my rescue:crying:
Cesilina said:
Please I need help my I rooted my S7 (flat) flashed the original OS with odin Installed Twrp flashed Andriod 9 and since then I can't make or receive calls wifi seems fine. Someone please come to my rescue:crying:
Click to expand...
Click to collapse
The S7 didn't receive Android 9 so the ROM is a custom one. Any issues with custom ROM's should be asked on the ROM thread itself where you got the ROM from. It's quite normal for custom ROM'S to have bugs.
You can try flashing the ROM (Android 9 Pie) again to see if it works. If not there are several different A9 ROM's to choose from.
cooltt said:
The S7 didn't receive Android 9 so the ROM is a custom one. Any issues with custom ROM's should be asked on the ROM thread itself where you got the ROM from. It's quite normal for custom ROM'S to have bugs.
You can try flashing the ROM (Android 9 Pie) again to see if it works. If not there are several different A9 ROM's to choose from.
Click to expand...
Click to collapse
Thank you for reply. I have tried atleast 4 different custom ROMs but to avail
Cesilina said:
Thank you for reply. I have tried atleast 4 different custom ROMs but to avail
Click to expand...
Click to collapse
Do you still have an imei number listed in settings?
Can't make or receive calls
cooltt said:
Do you still have an imei number listed in settings?
Click to expand...
Click to collapse
Yes please I still have an IMEI number
Tried to root using a method that involved 4 odin files which I guess is most methods nowadays. Im used to old root methods were there is only one file I need to flash so I only flashed one file and it failed I don't have snapdragon chip set I don't think I googled my IMEI number and it said I didn't. Now my phone is stuck in Bootloop I tried flashing stock firmware I got from Sammobile and other sites making sure it was the latest version and it didn't work. I went into Maintenance recovery and tried factory reset it gave me the erasing screen but would still not boot up. I can still enter download mode and recovery but nothing seems to work please help.
Tried flashing ENG boot although I have no clue what it is but it made no difference. Tried also flashing TWRP I got error: SECURE CHECK FAIL: recovery. I did some research and apparently I might have a locked bootloader.
I just want to boot into my phone whatever it takes please help
Last OS update I got was either may or june
IMEI: 358166076487955
If your phone is model SM-G935V, aka Verizon, you have a Snapdragon chip. Therefore, there is no TWRP. And, depending on the bootloader version you had prior to attempting root, you might be out of luck.
What was your firmware version BEFORE you attempted root? (For example, mine is: G935VVRS4CRI1). The 5th digit from the right is the important one.
SkylineDriver said:
If your phone is model SM-G935V, aka Verizon, you have a Snapdragon chip. Therefore, there is no TWRP. And, depending on the bootloader version you had prior to attempting root, you might be out of luck.
What was your firmware version BEFORE you attempted root? (For example, mine is: G935VVRS4CRI1). The 5th digit from the right is the important one.
Click to expand...
Click to collapse
Thank you for your help but i figured it out. Finally found my specific firmware and got it to boot. the thing is I googled my IMEI and it says I dont have a snapdragon I have an exynos chipset. Did some more digging and it confirmed I had an exynos chipset. Problem is fixed though thank you for the help.
If you have Exynos then it is not a Verizon branded phone. Your phone might be working on the Verizon network, but....
Either way, thanks for the update. Glad you got it sorted.
My mobile had an update before a month probably an security patch update for Android 10. A week before my mobile just turned off and got stuck in a bootloop and didn't turn on. Now I didn't reset it because I thought I'd try to get my data back. So yesterday I downloaded the OTA and followed a procedure (https://www.samsungsfour.com/tutorials/how-to-manually-install-stock-rom-on-galaxy-m30s.html) from online to flash it on the mobile. Now it's just always on the galaxy m30s logo screen. It doesn't even reboot to the bootloader menu.
Priyaaaa said:
My mobile had an update before a month probably an security patch update for Android 10. A week before my mobile just turned off and got stuck in a bootloop and didn't turn on. Now I didn't reset it because I thought I'd try to get my data back. So yesterday I downloaded the OTA and followed a procedure (https://www.samsungsfour.com/tutorials/how-to-manually-install-stock-rom-on-galaxy-m30s.html) from online to flash it on the mobile. Now it's just always on the galaxy m30s logo screen. It doesn't even reboot to the bootloader menu.
Click to expand...
Click to collapse
The instructions linked are looking good IMO.
Flashing with Odin was successful?
Or was there an error?
Maybe you should check that the downloaded firmware is for your exact device and region. Keep in mind that if you are flashing another CSC (other than Home_CSC), a factory reset is needed.
Maybe you have to flash the firmware again.