Question Recovery in TWRP - Xiaomi 12

Hello. I have a problem and no matter what I do, I can't recover in TWRP. I have downloaded the 182MB vTVRP package. After several pitfalls, TWRP finally tells me that the recovery was successful. No red field. However, after rebooting the system, a bootloop appeared and the ROM no loaded. Can anyone advise? Thanks

Benoni1 said:
Hello. I have a problem and no matter what I do, I can't recover in TWRP. I have downloaded the 182MB vTVRP package. After several pitfalls, TWRP finally tells me that the recovery was successful. No red field. However, after rebooting the system, a bootloop appeared and the ROM no loaded. Can anyone advise? Thanks
Click to expand...
Click to collapse
What TWRP?
What rom are you flashing?

TWRP Hello. I have a problem and no matter what I do, I can't recover in TWRP. I have downloaded the 182MB vTVRP package. After several pitfalls, TWRP finally tells me that the recovery was successful. No red field. However, after rebooting the system, a bootloop appeared and the ROM loaded. Can anyone advise? Thanks

TWRP (boot) 3.6.2_12-Mi12_v5.1_A12-cupid-skkk.img 192MB and recovery ROM 13.0.24.0.SLCEUXM

Benoni1 said:
TWRP (boot) 3.6.2_12-Mi12_v5.1_A12-cupid-skkk.img 192MB and recovery ROM 13.0.24.0.SLCEUXM
Click to expand...
Click to collapse
Download this Fastboot rom and use Miflash(Read the instructions carefully).
Package Name: cupid_eea_global_images_V13.0.24.0.SLCEUXM_20220927.0000.00_12.0_eea_ca9a294f46.tgz​
https://xiaomifirmwareupdater.com/miui/cupid/stable/V13.0.24.0.SLCEUXM/
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/

NOSS8 said:
Stáhněte si tuto Fastboot rom a použijte Miflash (Přečtěte si pozorně pokyny).
Název balíčku: cupid_eea_global_images_V13.0.24.0.SLCEUXM_20220927.0000.00_12.0_eea_ca9a294f46.tgz​
https://xiaomifirmwareupdater.com/miui/cupid/stable/V13.0.24.0.SLCEUXM/
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Click to expand...
Click to collapse
Thank you

Related

Phone won't boot and can't do much from TWRP

Hi !
I installed TWRP to root my honor view 10 3/4 weeks ago.
Today I installed an update. And since then, the phone won't boot past TWRP (which I can access) or Huawei eRecovery mode.
When I land in the eRecovery mode it offers me to shutdown, reboot, or connect to wifi and do a factory reset. When I attempt the factory reset it tells me that downloading package info failed.
I tried to do a reset from TWRP without success gives me ERROR 9. I also tired to install the stock rom (update.zip) from TWRP and I also get ERROR 9.
I'm a complete noob when it comes to phones. Anyone have an idea of a solution ?
Thank you for reading !
Get a microsd card flash Dload file
aditya desai said:
Get a microsd card flash Dload file
Click to expand...
Click to collapse
Tried and it tells me system installation failed, maybe I have the wrong file ?
Thanks for your help!
ouamakavoula said:
Tried and it tells me system installation failed, maybe I have the wrong file ?
Thanks for your help!
Click to expand...
Click to collapse
Whats your model, if it is L09 then get the stock ramdisk image from magisk thread in development section and also search for recovery image. Flash it via fastboot and boot normally.
Never ever try ota on rooted phone.
shashank1320 said:
Whats your model, if it is L09 then get the stock ramdisk image from magisk thread in development section and also search for recovery image. Flash it via fastboot and boot normally.
Never ever try ota on rooted phone.
Click to expand...
Click to collapse
My model is L09, I flashed the stock ramdisk image and now I can no longer get into TWRP but I am unsure of what to do now ?
Thanks
ouamakavoula said:
My model is L09, I flashed the stock ramdisk image and now I can no longer get into TWRP but I am unsure of what to do now ?
Thanks
Click to expand...
Click to collapse
Able to boot to system now? You cam always flash twrp from fastboot. Avoid as of now and boot to stock rom first
shashank1320 said:
Able to boot to system now? You cam always flash twrp from fastboot. Avoid as of now and boot to stock rom first
Click to expand...
Click to collapse
When I try to boot the phone it displays the message that the phone in unlocked and should no be trusted, it shows the honor booting screen and after a few seconds shuts down and the process is repeating.
If i try to press the volume up key when booting it takes me to huawei eRecovery where I can either shutdown the phone or download recovery but it fails everytime.
Thanks
Try flash the No check recovery, boot into and wipe cache. Then reboot
Powered by View 10
Try this
1. Flash stock ramdisk img
2. Flash stock recovery img
3. Reboot to recovery with button combination ie; power and vol down together
4. Wipe data and cache
5. Reboot.
Hopefully it'll work if it doesn't flash system.img after 1 & 2 steps and follow the next steps
Hi please specify model
And what update you installed...
If the update was genuinely meant for phone I believe a data and cache partation format should fix this..
I hope you are atleast seeing the honor bootscreen...
Specify model so that we could point you to correct system.img
Also did twrp gave any errors formatting cache memory?
same here
BKL-L09

Teclast M89 problem installing TWRP

Hi folks. As the title suggest I'm having problems installing TWRP recovery on teclast M89 tablet. I've tried a few different tutorials with no success. When I do it with fastboot it says that its installed, after that when I try to reboot the device, I'm stuck in bootloop. I've tried to do it a few times and its always the same problem. Does anyone have a solution? Thanks.
Hello, the same for me with my M89, I'm going crazy.... Help us please!!!! Thanks!!!
Teclast M89 TWRP 3.3.1
Teclast M89 TWRP 3.3.1
TWRP 3.3.1 for Teclast M89
The archive includes:
ZIP file for flashing via stock recovery
IMG file for flashing via fastboot
TWRP source code
Teclast M89 uses well-known firmware signature Android keys (test keys), that's why you can flash TWRP without unlocking the bootloader and erasing user data.
Installation instruction is inside the archive.
https://www.androidfilehost.com/?fid=6006931924117883832
My small Teclast M89 website: https://teclast-m89.neocities.org/
M89 TWRP Worked!
ValdikSS said:
Teclast M89 TWRP 3.3.1
TWRP 3.3.1 for Teclast M89
The archive includes:
ZIP file for flashing via stock recovery
IMG file for flashing via fastboot
TWRP source code
Teclast M89 uses well-known firmware signature Android keys (test keys), that's why you can flash TWRP without unlocking the bootloader and erasing user data.
Installation instruction is inside the archive.
https://www.androidfilehost.com/?fid=6006931924117883832
Click to expand...
Click to collapse
This TWRP worked like a charm for me. I had already rooted via Magisk- but was really looking for a working TWRP for backing up before I really went crazy with mods.
Thanks so much!!
Jmlanner said:
This TWRP worked like a charm for me. I had already rooted via Magisk- but was really looking for a working TWRP for backing up before I really went crazy with mods.
Thanks so much!!
Click to expand...
Click to collapse
Make sure to backup nvram, nvdata, private partitions.
ValdikSS said:
Make sure to backup nvram, nvdata, private partitions.
Click to expand...
Click to collapse
Will do. I did bkk nvdata, will double check if I bkk privdata. again TK!
stuck
Hi, i tried this method but couldnt boot in system, only twrp all the time. after initial install this TWRP 3.3.1, it bootlooped in twrp but storage wasnt seen in pc, so i formatted data and restarted in twrp. from there it couldnt restart system anymore. actually i managed to flash magisk 19.3 . i flased another version of twrp 3.2.3 that seemed to work fine, to see if it was the version, and it bootloops (restarts until logo) all the time. Any hint please?
It says in little print "your device now unlocked...your device will boot in 5 seconds" but restart. Cant get it into fastboot by volume up; unresponsive at all. just bootloops in logo.
Any help is very much appreciated. thanks
voland34 said:
Hi, i tried this method but couldnt boot in system, only twrp all the time. after initial install this TWRP 3.3.1, it bootlooped in twrp but storage wasnt seen in pc, so i formatted data and restarted in twrp. from there it couldnt restart system anymore. actually i managed to flash magisk 19.3 . i flased another version of twrp 3.2.3 that seemed to work fine, to see if it was the version, and it bootloops (restarts until logo) all the time. Any hint please?
It says in little print "your device now unlocked...your device will boot in 5 seconds" but restart. Cant get it into fastboot by volume up; unresponsive at all. just bootloops in logo.
Any help is very much appreciated. thanks
Click to expand...
Click to collapse
Hi
I think you are going to have to reflash the original Rom using SPFlahtool. Then you must install Magisk Manage on tabletr. Copy the boot image from the ROM files to Your phone. Then use Magisk Manager to Patch the copied boot image. Transfer modified boot image to PC. Use fastboot to flash modified boot image back onto the tablet. The long and the short of it is - you need to find a way to patch the boot image with Magisk before any TWRP will work.
Right. The problem was accesing the tablet enough time as it stayed connected and recognized by pc only 3-5 secs, and then permanent unresponsive through buttons, but i used then sp flash to just flash boot, then preloader, then recovery from stock at every reboot. From there i could turn it off, It got out of the loop, and accesible to reflash whole stock rom. In the end i only flashed magisk through fastboot, as twrp is not so useful to me as no custom rom, so better no risks.
Thanks for your reply though
voland34 said:
Right. The problem was accesing the tablet enough time as it stayed connected and recognized by pc only 3-5 secs, and then permanent unresponsive through buttons, but i used then sp flash to just flash boot, then preloader, then recovery from stock at every reboot. From there i could turn it off, It got out of the loop, and accesible to reflash whole stock rom. In the end i only flashed magisk through fastboot, as twrp is not so useful to me as no custom rom, so better no risks.
Thanks for your reply though
Click to expand...
Click to collapse
I am glad you got your tablet running again. I had originally started out with just Magisk as root also. I do like to have a working TWRP for backing up though. You should be able now to flash the above mentioned TWRP now via SpFlashtool or fastboot.
voland34 said:
Hi, i tried this method but couldnt boot in system, only twrp all the time. after initial install this TWRP 3.3.1, it bootlooped in twrp but storage wasnt seen in pc, so i formatted data and restarted in twrp. from there it couldnt restart system anymore. actually i managed to flash magisk 19.3 . i flased another version of twrp 3.2.3 that seemed to work fine, to see if it was the version, and it bootloops (restarts until logo) all the time. Any hint please?
It says in little print "your device now unlocked...your device will boot in 5 seconds" but restart. Cant get it into fastboot by volume up; unresponsive at all. just bootloops in logo.
Any help is very much appreciated. thanks
Click to expand...
Click to collapse
It seems OEM unlock fills "para" partition with some data which forces it to boot into recovery. Stock recovery reads this data and perform data partition wipe or something similar, but TWRP does not handle this data and you get a boot loop. You can fix that by cleaning "para" partition. Execute the following command while booted into TWRP, either from TWRP terminal itself or from adb shell:
Code:
dd if=/dev/zero of=/dev/block/platform/mtk-msdc.0/11230000.MSDC0/by-name/para
ValdikSS said:
It seems OEM unlock fills "para" partition with some data which forces it to boot into recovery. Stock recovery reads this data and perform data partition wipe or something similar, but TWRP does not handle this data and you get a boot loop. You can fix that by cleaning "para" partition. Execute the following command while booted into TWRP, either from TWRP terminal itself or from adb shell:
Code:
dd if=/dev/zero of=/dev/block/platform/mtk-msdc.0/11230000.MSDC0/by-name/para
Click to expand...
Click to collapse
Ok, i'll try. Thanks!
Does anybody know if this guide also works for the new Teclast M89 PRO-model???
gizmo862 said:
Does anybody know if this guide also works for the new Teclast M89 PRO-model???
Click to expand...
Click to collapse
No, most probably it won't. PRO model has different SoC/CPU.
gizmo862 said:
Does anybody know if this guide also works for the new Teclast M89 PRO-model???
Click to expand...
Click to collapse
No. It won't. I bricked my ****ing tablet. It refuses to reboot once it's unlocked because (as the screen say) it is now untrusted. There is no way to relock the bootloader again and the the tablet is stuck in a bootloop.
Teclast is ****.
Hello i'm new in XDA, i have this tablet althougth i can't conect the hdmi port to the tv, the screen keep in black, i think it's because of the display format (4:3) can the root solve this problem?
Thank You!!
w1nst0n sm1th said:
No. It won't. I bricked my ****ing tablet. It refuses to reboot once it's unlocked because (as the screen say) it is now untrusted. There is no way to relock the bootloader again and the the tablet is stuck in a bootloop.
Teclast is ****.
Click to expand...
Click to collapse
The bootloop is not because you've unlocked the bootloader, but most probably because the firmware is designed to perform userdata partition setup in the recovery upon first boot, and you don't have stock recovery, that's why it can't finish formatting procedure.
This could be fixed by flashing stock recovery and booting once.
You can ask for a firmware from Teclast (I used to ask them on vkontakte because they didn't respond my mails), they will provide it.
OR you can write zeros to "para" partition using fastboot, it should do the trick too.
---------- Post added at 16:58 ---------- Previous post was at 16:56 ----------
Edgaralanmx said:
Hello i'm new in XDA, i have this tablet althougth i can't conect the hdmi port to the tv, the screen keep in black, i think it's because of the display format (4:3) can the root solve this problem?
Thank You!!
Click to expand...
Click to collapse
Try to unplug/plug again HDMI cable several times. It seems that the HDMI controller or drivers are buggy.
To change the resolution I use "SecondScreen" software (requires root).
Hi guys,
I´m looking for a working rooting method for my Teclast M89 Pro model ??
Any idea ?? What about the "One Click Root" Program ???
Thank´s a lot
The device was trying to root.
I get the following information when restarting:
orange state
the device has been unlocked and can't be trusted
your device will boot in 5 seconds
Click to expand...
Click to collapse
When I try TWRP via sideload or recovery menu I get the following:
Supported API:3
-- Install /sdcard/teclast_m89_twrp_311.zip ...
Finding update packacke ...
Opening update package ...
Verifying update package ...
Update package verification took 0.5 s (result 0).
Installing update ...
E:Failed to find META-INF/com/android/metadata in update package.
Installing Teclast M89 TWRP Recovery
script succeeded: result was [1.000000]
Install from SD Card complete.
Click to expand...
Click to collapse
But TWRP is not installed.
Where is the problem?
kumpi said:
But TWRP is not installed.
Where is the problem?
Click to expand...
Click to collapse
Are you trying to enter recovery right after flashing it, without booting the OS first? I think you need do enter TWRP right after flashing it.

Brick - only fastboot mode working

Hi, I bricked my phone(L29C432) and I don't know what I can do now.
I upgraded via Firmware Finder to EMUI 9. Then I flashed this twrp and flashed this RR rom. After that I did format data in twrp. I don't know what went wrong, but now I can't boot twrp, erecovery or the system. I'm stuck at the "Your device has been unlocked and can't be trusted." screen.
What I can do is enter fastboot mode and flash a recovery via fastboot, but it doesn't boot.
I tried every twrp I could find here. I extracted recovery_ramdis.img from update.app(both EMUI 9 and 8) and flashed it. Nothing will boot.
Can anyone help me please? I'm in despair :silly:
Thanks in advance
mallna said:
Hi, I bricked my phone(L29C432) and I don't know what I can do now.
I upgraded via Firmware Finder to EMUI 9. Then I flashed this twrp and flashed this RR rom. After that I did format data in twrp. I don't know what went wrong, but now I can't boot twrp, erecovery or the system. I'm stuck at the "Your device has been unlocked and can't be trusted." screen.
What I can do is enter fastboot mode and flash a recovery via fastboot, but it doesn't boot.
I tried every twrp I could find here. I extracted recovery_ramdis.img from update.app(both EMUI 9 and 8) and flashed it. Nothing will boot.
Can anyone help me please? I'm in despair :silly:
Thanks in advance
Click to expand...
Click to collapse
Try flashing back stock system from fastboot. System from the build you were on
Always factory reset from stock recovery, never twrp.
ante0 said:
Try flashing back stock system from fastboot. System from the build you were on
Always factory reset from stock recovery, never twrp.
Click to expand...
Click to collapse
Thanks for your reply, ante0.
I flashed system. img, kernel.img and recovery_ramdis.img, extracted from update.app. It doesn't boot.
Do I need to flash some other img files from update.app? (see attached image)

Can't factory reset my phone

Hello,
So in the first place I want to let you know, that I'm a total noob at this. (This is my first android phone after years of ios)
My problem is that I wanted to update my system from 9.5.7 to the newest 10.0.1. I was rooted, so I checked a few youtube videos how to update to have root after the process.
So anyway, I followed one of these videos. . There was a strange thing in the beginning too. When I hold the power button and then pressed the recovery mode, instead of twrp, the bootloader load up. So I fastbooted the twrp with my computer and did the thing that way. Now I have my phone on 10.0.1 with no magisk only the manager. If I try to fastboot twrp from computer the phone just stucks at fastboot text. I tried to do factory reset to have a clean system, but when I did it, it reboots and it boots into twrp, but that twrp says 0MB to storage and everything.
Sorry for my incompetence, I hope it is understandable.
The question is, how can I factory reset my phone?
Mondaji said:
Hello,
So in the first place I want to let you know, that I'm a total noob at this. (This is my first android phone after years of ios)
My problem is that I wanted to update my system from 9.5.7 to the newest 10.0.1. I was rooted, so I checked a few youtube videos how to update to have root after the process.
So anyway, I followed one of these videos. . There was a strange thing in the beginning too. When I hold the power button and then pressed the recovery mode, instead of twrp, the bootloader load up. So I fastbooted the twrp with my computer and did the thing that way. Now I have my phone on 10.0.1 with no magisk only the manager. If I try to fastboot twrp from computer the phone just stucks at fastboot text. I tried to do factory reset to have a clean system, but when I did it, it reboots and it boots into twrp, but that twrp says 0MB to storage and everything.
Sorry for my incompetence, I hope it is understandable.
The question is, how can I factory reset my phone?
Click to expand...
Click to collapse
Switch the slot in twrp then reboot
Then try factory reset.
twinnfamous said:
Switch the slot in twrp then reboot
Then try factory reset.
Click to expand...
Click to collapse
If I switch and reboot it stucks in bootloader :/
Mondaji said:
If I switch and reboot it stucks in bootloader :/
Click to expand...
Click to collapse
Have you got into twrp
twinnfamous said:
Have you got into twrp
Click to expand...
Click to collapse
What do you mean? With fastboot I can't because it stucks on the fastboot logo. If I try a factory reset then it boots into twrp, but that twrp is not very useful, because nothing works.
what version of twrp you have?
immppa said:
what version of twrp you have?
Click to expand...
Click to collapse
3.3.1-4 guacamole
Mondaji said:
3.3.1-4 guacamole
Click to expand...
Click to collapse
You need twrp 3.3.1-70 for Android 10. Also, did you disable all Magisk modules before updating the phone, updating while having modules enabled will cause a bootloop. You should check the forums more often as there are some guides for newbies.
Kaz205 said:
You need twrp 3.3.1-70 for Android 10. Also, did you disable all Magisk modules before updating the phone, updating while having modules enabled will cause a bootloop. You should check the forums more often as there are some guides for newbies.
Click to expand...
Click to collapse
Oh okay! Yes I not only disabled them, but removed them. Actually my phone isn't in bootloop it's working in android10 but cant factory reset. I hope that the twrp version is the cause! Thank you!!
Mondaji said:
3.3.1-4 guacamole
Click to expand...
Click to collapse
Mondaji said:
Oh okay! Yes I not only disabled them, but removed them. Actually my phone isn't in bootloop it's working in android10 but cant factory reset. I hope that the twrp version is the cause! Thank you!!
Click to expand...
Click to collapse
Yeah, twrp 3.3.1-4 doesnt support Android 10. Also np
Just flash all stock firmware with MSM tool

Problem with flashing custom ROM (error 255)

Hey guys,
after searching through different websites and guides you are my last resort to get a custom ROM running on my Redmi S2.
Everytime i try to flash a custom ROM i get the error 255. Here is what i tried until now (bootloader is unlocked):
- flashing twrp(twrp-3.2.1-0-ysl) to recovery using fastboot
- wiping phone (first wipe to disable encryption since miui puts some kind of password on the hard drive that i dont know, second wipe to ensure partitions are clean for new OS)
- mounting phone to pc to transfer OS image (tried Lineage and Havoc, both modified for S2 (ysl version)) and GApps
- finally, installing OS zip (after which i get error message 255, telling me that twrp wasnt able to install the zip file)
please help me out, ask away if something's not clear
flying_shitnugget said:
Hey guys,
after searching through different websites and guides you are my last resort to get a custom ROM running on my Redmi S2.
Everytime i try to flash a custom ROM i get the error 255. Here is what i tried until now (bootloader is unlocked):
- flashing twrp(twrp-3.2.1-0-ysl) to recovery using fastboot
- wiping phone (first wipe to disable encryption since miui puts some kind of password on the hard drive that i dont know, second wipe to ensure partitions are clean for new OS)
- mounting phone to pc to transfer OS image (tried Lineage and Havoc, both modified for S2 (ysl version)) and GApps
- finally, installing OS zip (after which i get error message 255, telling me that twrp wasnt able to install the zip file)
please help me out, ask away if something's not clear
Click to expand...
Click to collapse
change your recovery..
Baim alif said:
change your recovery..
Click to expand...
Click to collapse
Mind elaborating? What do you mean exactly?
flying_shitnugget said:
Mind elaborating? What do you mean exactly?
Click to expand...
Click to collapse
use this recovery
https://files.orangefox.download/OrangeFox-Stable/ysl/OrangeFox-R10.0-1-Stable-ysl.zip
Baim alif said:
use this recovery
https://files.orangefox.download/OrangeFox-Stable/ysl/OrangeFox-R10.0-1-Stable-ysl.zip
Click to expand...
Click to collapse
so... i first tried taking the recovery.img out of the zip and flashing it via fastboot, didnt worked. after that i tried first flashing my old twrp and then (after wiping) installing the whole zip. the install finished successfully, sayed it will restart to recovery in 5 seconds... aaaand got stuck on the android screen. now it wont boot to recovery at all anymore, unless i flash the old twrp again. suggestions?
flying_shitnugget said:
so... i first tried taking the recovery.img out of the zip and flashing it via fastboot, didnt worked. after that i tried first flashing my old twrp and then (after wiping) installing the whole zip. the install finished successfully, sayed it will restart to recovery in 5 seconds... aaaand got stuck on the android screen. now it wont boot to recovery at all anymore, unless i flash the old twrp again. suggestions?
Click to expand...
Click to collapse
try to boot recovery with power button and volume up
Baim alif said:
try to boot recovery with power button and volume up
Click to expand...
Click to collapse
yes, that's what i did. i also tried booting into from fastboot and still nothing.
flying_shitnugget said:
yes, that's what i did. i also tried booting into from fastboot and still nothing.
Click to expand...
Click to collapse
hmmm... try this bro..
https://androidfilehost.com/?fid=6006931924117927913
flying_shitnugget said:
yes, that's what i did. i also tried booting into from fastboot and still nothing.
Click to expand...
Click to collapse
Try this, you have to flash first this in fastboot https://files.orangefox.download/OrangeFox-Beta/ysl/ the R10.0-1 RC1 .img file
And THEN flash this https://orangefox.download/en/device/ysl once you are in the recovery.
Then it worked for me, finally, hope this helps.
celephrn said:
Try this, you have to flash first this in fastboot https://files.orangefox.download/OrangeFox-Beta/ysl/ the R10.0-1 RC1 .img file
And THEN flash this https://orangefox.download/en/device/ysl once you are in the recovery.
Then it worked for me, finally, hope this helps.
Click to expand...
Click to collapse
so i tried this approach. i first installed how you told me to (orangefox R10.0-1 RC1 .img first), but factory reset nor installing the second recovery img worked because of the encryption miui puts on the phone. So i flashed twrp, wiped memory, flashed first orange fox img and from then installed the second img (as a zip). until here everything worked, orange fox told me that he's going to reboot to new recovery -- and i got stuck on the boot logo again. :c
flying_shitnugget said:
so i tried this approach. i first installed how you told me to (orangefox R10.0-1 RC1 .img first), but factory reset nor installing the second recovery img worked because of the encryption miui puts on the phone. So i flashed twrp, wiped memory, flashed first orange fox img and from then installed the second img (as a zip). until here everything worked, orange fox told me that he's going to reboot to new recovery -- and i got stuck on the boot logo again. :c
Click to expand...
Click to collapse
Did you flash the firmware? https://github.com/XiaomiFirmwareUpdater/firmware_xiaomi_ysl/releases/tag/stable-16.03.2020
Other thing you could try is flash the other .img files from https://files.orangefox.download/OrangeFox-Beta/ysl/ and the flash in there the same .zip file you did as before.
celephrn said:
Did you flash the firmware? https://github.com/XiaomiFirmwareUpdater/firmware_xiaomi_ysl/releases/tag/stable-16.03.2020
Other thing you could try is flash the other .img files from https://files.orangefox.download/OrangeFox-Beta/ysl/ and the flash in there the same .zip file you did as before.
Click to expand...
Click to collapse
im currently on MIUI V.10.3.1.0.OEFMIXM | Stable 654M, is it important to flash newer firmware?
flying_shitnugget said:
im currently on MIUI V.10.3.1.0.OEFMIXM | Stable 654M, is it important to flash newer firmware?
Click to expand...
Click to collapse
Could solve the issue, I'd give it a shot!
celephrn said:
Could solve the issue, I'd give it a shot!
Click to expand...
Click to collapse
i suppose you flash it using MiFlash right? If so, i have a problem with flashing new roms using it because my Mi account isnt allowed to do that, i unlocked the bootloader using a tool (dont know if this has something to do with the custom rom problem)
flying_shitnugget said:
i suppose you flash it using MiFlash right? If so, i have a problem with flashing new roms using it because my Mi account isnt allowed to do that, i unlocked the bootloader using a tool (dont know if this has something to do with the custom rom problem)
Click to expand...
Click to collapse
As long as the bootloader is unlocked it should be fine. And no, you should flash the firmware just as you would flash the rom, i. e. from OrangeFox Recovery.
celephrn said:
As long as the bootloader is unlocked it should be fine. And no, you should flash the firmware just as you would flash the rom, i. e. from OrangeFox Recovery.
Click to expand...
Click to collapse
so i flashed the firmware as you said, now neither orangefox or twrp throw me the error "unable to locate storage device", i cant mount the storage to the pc and cant copy the custom rom stuff as well
celephrn said:
As long as the bootloader is unlocked it should be fine. And no, you should flash the firmware just as you would flash the rom, i. e. from OrangeFox Recovery.
Click to expand...
Click to collapse
UPDATE: i finally ****ing did it. So here are the steps that i took (incase anyone has to go through this **** as well)
1. flash MIUI on mobile device using MiFlash (at least i did this by shorting 2 pins on the back)
2. (VERY IMPORTANT!!!) instantly boot to fastboot using Power button + Volume down. this has to be before android starts setting up the phone
3. flash recovery with the image that celephrn provided in this thread
4.boot to recovery by holding Volume up + Power button
5. install the miui update that celephrn provided in this thread
6. reboot to recovery
7. install orange recovery zip that celephrn provided in this thread (phone reboots to recovery)
8. now you can reboot to system (Do NOT (!!!) set the phone up, just let it work its things until you see the MIUI setup screen)
9. Now, finally you can dirty flash your custom rom (and GApps)
10. after flashing the new rom android will throw you alot of errors so you will have to wipe Dalvik/Cache, System, Data and Internal Storage.
11. now you can flash your Rom clean and you're good to go
(huge thanks to celephrn, helped me out after me struggling for a few good weeks with this damn phone)
Baim alif said:
use this recovery
https://files.orangefox.download/OrangeFox-Stable/ysl/OrangeFox-R10.0-1-Stable-ysl.zip
Click to expand...
Click to collapse
bro please help me i have the same issue error 255 on 3.2.1-0 ysl twrp.please help
Farrellclay said:
bro please help me i have the same issue error 255 on 3.2.1-0 ysl twrp.please help
Click to expand...
Click to collapse
so far, what have you done

Categories

Resources