Phone won't boot and can't do much from TWRP - Honor View 10 Questions & Answers

Hi !
I installed TWRP to root my honor view 10 3/4 weeks ago.
Today I installed an update. And since then, the phone won't boot past TWRP (which I can access) or Huawei eRecovery mode.
When I land in the eRecovery mode it offers me to shutdown, reboot, or connect to wifi and do a factory reset. When I attempt the factory reset it tells me that downloading package info failed.
I tried to do a reset from TWRP without success gives me ERROR 9. I also tired to install the stock rom (update.zip) from TWRP and I also get ERROR 9.
I'm a complete noob when it comes to phones. Anyone have an idea of a solution ?
Thank you for reading !

Get a microsd card flash Dload file

aditya desai said:
Get a microsd card flash Dload file
Click to expand...
Click to collapse
Tried and it tells me system installation failed, maybe I have the wrong file ?
Thanks for your help!

ouamakavoula said:
Tried and it tells me system installation failed, maybe I have the wrong file ?
Thanks for your help!
Click to expand...
Click to collapse
Whats your model, if it is L09 then get the stock ramdisk image from magisk thread in development section and also search for recovery image. Flash it via fastboot and boot normally.
Never ever try ota on rooted phone.

shashank1320 said:
Whats your model, if it is L09 then get the stock ramdisk image from magisk thread in development section and also search for recovery image. Flash it via fastboot and boot normally.
Never ever try ota on rooted phone.
Click to expand...
Click to collapse
My model is L09, I flashed the stock ramdisk image and now I can no longer get into TWRP but I am unsure of what to do now ?
Thanks

ouamakavoula said:
My model is L09, I flashed the stock ramdisk image and now I can no longer get into TWRP but I am unsure of what to do now ?
Thanks
Click to expand...
Click to collapse
Able to boot to system now? You cam always flash twrp from fastboot. Avoid as of now and boot to stock rom first

shashank1320 said:
Able to boot to system now? You cam always flash twrp from fastboot. Avoid as of now and boot to stock rom first
Click to expand...
Click to collapse
When I try to boot the phone it displays the message that the phone in unlocked and should no be trusted, it shows the honor booting screen and after a few seconds shuts down and the process is repeating.
If i try to press the volume up key when booting it takes me to huawei eRecovery where I can either shutdown the phone or download recovery but it fails everytime.
Thanks

Try flash the No check recovery, boot into and wipe cache. Then reboot
Powered by View 10

Try this
1. Flash stock ramdisk img
2. Flash stock recovery img
3. Reboot to recovery with button combination ie; power and vol down together
4. Wipe data and cache
5. Reboot.
Hopefully it'll work if it doesn't flash system.img after 1 & 2 steps and follow the next steps

Hi please specify model
And what update you installed...
If the update was genuinely meant for phone I believe a data and cache partation format should fix this..
I hope you are atleast seeing the honor bootscreen...
Specify model so that we could point you to correct system.img
Also did twrp gave any errors formatting cache memory?

same here
BKL-L09

Related

URGENT Help Needed!! Suspected Brick (B110 to B136)

Hi Guys,
So I got my Mate 9 (MHA-L29C636B110) today and i unlocked bootloader and rooted it so I can restore my backups using Titanium Backup.
After I flashed TWRP and rooted, the updater in settings shows new update available, so i tried to download the OTA (MHA-L29C636B136) and update it.
But it can't be updated maybe due to TWRP installed, so I tried the following:
1) Flash stock recovery through fastboot from B136 update.app (Failed to update as well)
2) Unroot with SuperSU (Failed as well)
3) Flash boot.img, recovery.img, system.img from B136 (Failed as well)
But now the phone reboots everytime I type my PIN to unlock phone. I still can drag notification bar, and access to torch light function on lockscreen etc.
I have full zip and OTA zip update.app extracted. But I'm not sure what is my next step.
Anyone able to advise how to revert back to B110 or update manually to B136?
Thanks in advance!!!
Flash the full zip in twrp,you will get some error but you should be ok
gm007 said:
Flash the full zip in twrp,you will get some error but you should be ok
Click to expand...
Click to collapse
But I can't boot to TWRP even if fastboot shows it flashed successfully. Went to eRecovery all the time.
Also, I tried to flash the Full zip and OTA zip file with TWRP before I start trying to flash the img files seperately, they don't work...
To boot to twrp you have to hold vol up + power and release power when you see the logo while keeping volume up pressed.
gm007 said:
To boot to twrp you have to hold vol up + power and release power when you see the logo while keeping volume up pressed.
Click to expand...
Click to collapse
OK I managed to boot to TWRP, which file should I flash now to manually update to B136?
Thanks bro
The full firmware zip.
gm007 said:
The full firmware zip.
Click to expand...
Click to collapse
May I know where can I find the full firmware zip that i ready to be flashed?
I only able to get update.zip with update.app inside...
Flashing stock B136 with FunkyHuawei might be your best bet. Assuming funkyhuawei stays alive, this phone is pretty much un-brickable.
Goronok said:
Flashing stock B136 with FunkyHuawei might be your best bet. Assuming funkyhuawei stays alive, this phone is pretty much un-brickable.
Click to expand...
Click to collapse
I can only boot to TWRP for now, stuck in splash screen loop if boot normally, will funkyhuawei work?
You can find full firmware http://hwmt.ru/oth/HWFF/info/view.php?find_model=mha
Once you flash the update.zip reboot to recovery and factory reset.
try1231 said:
I can only boot to TWRP for now, stuck in splash screen loop if boot normally, will funkyhuawei work?
Click to expand...
Click to collapse
Yep. At the unlocked bootloader splash screen, hold the volume up button for 3 seconds to enter eRecovery. eRecovery downloads a stock build and flashes it automatically. Of course, you'll need to setup FunkyHuawei beforehand so that it'll download the version you want. (B136, etc)
gm007 said:
You can find full firmware http://hwmt.ru/oth/HWFF/info/view.php?find_model=mha
Once you flash the update.zip reboot to recovery and factory reset.
Click to expand...
Click to collapse
OK I'm downloading it now. So I place the file in SD Card and flash using TWRP, then factory reset. Correct?
I am now having bootloops so I have to wipe system, data, cache, dalvik with TWRP before flash right?
No don't wipe everything,just flash the zip reboot to recovery and factory reset.
Goronok said:
Yep. At the unlocked bootloader splash screen, hold the volume up button for 3 seconds to enter eRecovery. eRecovery downloads a stock build and flashes it automatically. Of course, you'll need to setup FunkyHuawei beforehand so that it'll download the version you want. (B136, etc)
Click to expand...
Click to collapse
So I have to connect to the Wifi that has DNS modified right? Because I'm having 5% update error with eRecovery everytime...
I'll try gm007's method first, if fails I'll have to use FunkyHuawei....
Thanks a lot!!
Yep, set DNS on router then pick your version on the FunkyHuawei site. Sounds intimidating but it's really pretty simple.
gm007 said:
No don't wipe everything,just flash the zip reboot to recovery and factory reset.
Click to expand...
Click to collapse
I'm unable to flash the update.zip file, it has the same content as my previous files: update.app, META-INF, full_mainpkg.tag
TWRP Error: Updater process ended with ERROR 7
What should I do with this zip file?
Goronok said:
Yep, set DNS on router then pick your version on the FunkyHuawei site. Sounds intimidating but it's really pretty simple.
Click to expand...
Click to collapse
I'm using my another phone as WIFI Hotspot, am I able to change DNS at my phone?
try1231 said:
I'm using my another phone as WIFI Hotspot, am I able to change DNS at my phone?
Click to expand...
Click to collapse
Now that, I don't know
try1231 said:
I'm unable to flash the update.zip file, it has the same content as my previous files: update.app, META-INF, full_mainpkg.tag
TWRP Error: Updater process ended with ERROR 7
What should I do with this zip file?
Click to expand...
Click to collapse
Can you copy the zip from sd card to internal memory? If so install from internal storage
gm007 said:
Can you copy the zip from sd card to internal memory? If so install from internal storage
Click to expand...
Click to collapse
Copied to Internal/data, same error, I believe it's the format of the files......I'll go with FunkyHuawei Method now. Thanks a lot for your help bro

US Honor 6x Unable to Boot TWRP Backup of Stock EMUI 5.0 (Help)

Hello there, I've been trying to return to stock EMUI after messing around with some AOSP-based ROMs, but my US model Honor 6x is unable to boot up the TWRP backup of it. And the dload method is unsuccessful, as it just says the firmware is incompatible with my device. Does anyone know a way to return back to stock EMUI and make my device as it was coming out of the factory?
Rommco05 said:
Hi, which is your model number...BLxLxxCxxx? Still you have access to twrp?
Click to expand...
Click to collapse
I believe it's the BLN-L24C567, since I have the US model of the Honor 6x.
Rommco05 said:
Ok, can you flash back twrp?
Click to expand...
Click to collapse
I still have TWRP and the backup of my original software, but it won't boot up. It just goes into a boot loop. I don't know what proper steps to take in order to get the software to boot up again.
Rommco05 said:
Ok, download this two zips and try flash via twrp. First small zip, right after big one. After go to reboot and make reboot recovery, now you will be in stock recovery and here tap factory reset, after normal reboot and should boot to rom
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1279/g104/v82815/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...24_hw_usa/update_data_full_BLN-L24_hw_usa.zip
Click to expand...
Click to collapse
Thank you so much; I'll do it. However, should I do a factory reset or format data in TWRP before flashing these ZIPs?
Rommco05 said:
No, no need be wiped anything
Click to expand...
Click to collapse
The update.zip (the bigger one) ended with "ERROR: 7" I'm not sure if this should have happened or not. Any idea?
Rommco05 said:
Try format data after reboot twrp and again format data now try flash zips.
If this doesn't help, u need this one:
-download Huawei Extractor from xda
-unzip big zip and extract from update.app, recovery.img
-flash recovery.img over fastboot (fastboot flash recovery recovery.img)
-now make update over dload method
(unzip both files and separately put to dload folder on sdcard, first big second small, but must be unzipped)
Click to expand...
Click to collapse
Okay, one more question: For the dload method, do I have both ZIPs in the dload folder and flash it at the same time, or do I flash one ZIP at a time in the stock recovery?
Rommco05 said:
Yes u need install both zips, becasue big one is system and small are apps. Flash stock recovery and after install big one (unzipped) after reboot (if phone boot to rom immediately turn him off) and install second one, same like first
Click to expand...
Click to collapse
My phone is currently installing the first UPDATE.app. Once I go back into the recovery, will my phone know to install UPDATE.APP(1) (the smaller one)? Or will there be a way to select the file? How exactly does it work?
Rommco05 said:
No you need deleted first one from dload and put in second one (small)
Click to expand...
Click to collapse
Sorry to keep asking questions, but how should I turn off the device once the first UPDATE.APP installs? It keeps trying to boot up.
Rommco05 said:
Leave him try boot to rom, should be boot in but rom will be incomplete and after turn him off
edit: if will be booting more like 10 min boot to recovery and here remove sdcard
edit1: hopefully will be all ok, I going slowly sleep
Click to expand...
Click to collapse
Thanks for those edits; I was a bit confused. Thank you for all your help; I'll update you if it works or not. Have a nice night.
I just wanted to leave a reply to let others know what I did:
1. Flashed stock recovery from the big update.zip file (I used the Huawei extractor to get it from the file)
2. Unzipped the big and little zip files
3. Made a folder called dload
4. Put the unzipped contents of the big zip in the dload folder
5. Held power and volume up + down buttons until it installed the big update file
6. I went into the recovery by holding volume up and power
7. I removed the SD card and deleted the contents of the big update and inserted the little update to the dload folder
8. I rebooted and used the same dload method to install the contents of the little update file
9. I went back into the recovery (power and volume up) and did a factory reset
10. I rebooted and everything worked!
11. Installed the intermediate package first and then the official 6.0 software through the dload method
12. Upgraded back to Nougat via the Marshmallow build
Rommco05 said:
Leave him try boot to rom, should be boot in but rom will be incomplete and after turn him off
edit: if will be booting more like 10 min boot to recovery and here remove sdcard
edit1: hopefully will be all ok, I going slowly sleep
Click to expand...
Click to collapse
Thank you for all your help! Seriously, I couldn't have done it without you!
Rommco05 said:
Leave him try boot to rom, should be boot in but rom will be incomplete and after turn him off
edit: if will be booting more like 10 min boot to recovery and here remove sdcard
edit1: hopefully will be all ok, I going slowly sleep
Click to expand...
Click to collapse
The only unfortunate thing was that I received a Nougat beta built, but I think I'll be able to find a finalized version online.
Rommco05 said:
You stuck in beta version? Now you have already instaled stable version
Click to expand...
Click to collapse
I just installed the files from Honor's site (the intermediate package and the 6.0 firmware) and went back to the official Marshmallow build and then upgraded to the official Nougat release. Everything is all good now!
That's good

Honor 8 brick, bootloop, work only fastboot

I have European honor8 32gb b389
i install lineage os 7.1.2 but dont like it and wont do restore backup with twrp, but after restore the phone blocked on honor screen.
i tried everything, and now i have a lot of confusion, i tried dload, but nothing happened when i turn on with +-power. I try with huawai extractor to flash boot system cust and recovery but nothing device go in bootloop. if i flash recovery from b131 firmware i can go in dload but freeze at 5%
what i can do? sorry for my English, i speak Italian and Russian if somebody want to help me in pm.
crn4 said:
I have European honor8 32gb b389
i install lineage os 7.1.2 but dont like it and wont do restore backup with twrp, but after restore the phone blocked on honor screen.
i tried everything, and now i have a lot of confusion, i tried dload, but nothing happened when i turn on with +-power. I try with huawai extractor to flash boot system cust and recovery but nothing device go in bootloop. if i flash recovery from b131 firmware i can go in dload but freeze at 5%
what i can do? sorry for my English, i speak Italian and Russian if somebody want to help me in pm.
Click to expand...
Click to collapse
Are you sure you're using the rollback package before? You can download it from honor official website, then you move the firmware file in a dload folder on your sdcard. Boot up using both + and - buttons and the power button in the same time and the phone will force the flashing of the rollback ( package needed to go back from android 7 to android 6) file. Then you have to download the android 6 firmware for your device from the honor official website again and flash it with the same process of the rollback package. If you can't undestand i can try to explain it in italian
davide.melkior said:
Are you sure you're using the rollback package before? You can download it from honor official website, then you move the firmware file in a dload folder on your sdcard. Boot up using both + and - buttons and the power button in the same time and the phone will force the flashing of the rollback ( package needed to go back from android 7 to android 6) file. Then you have to download the android 6 firmware for your device from the honor official website again and flash it with the same process of the rollback package. If you can't undestand i can try to explain it in italian
Click to expand...
Click to collapse
thnx , i know this method, i tried it yesterday but don't worked, now i retry and reply to you the results
ok, i tried now the first update.app to rollback but device freeze (Your device is booting now)
i think i need to flash from fastboot stock recovery from b389 firmware before do this
crn4 said:
thnx , i know this method, i tried it yesterday but don't worked, now i retry and reply to you the results
Click to expand...
Click to collapse
Unless you flash the rollback package you can't flash older version. Not sure if rollback package for your model os released
---------- Post added at 03:50 PM ---------- Previous post was at 03:49 PM ----------
crn4 said:
thnx , i know this method, i tried it yesterday but don't worked, now i retry and reply to you the results
ok, i tried now the first update.app to rollback but device freeze (Your device is booting now)
i think i need to flash from fastboot stock recovery from b389 firmware before do this
Click to expand...
Click to collapse
Ofcourse you need to flash the stock recovery. Are you trying in twrp?
davide.melkior said:
Are you sure you're using the rollback package before? You can download it from honor official website, then you move the firmware file in a dload folder on your sdcard. Boot up using both + and - buttons and the power button in the same time and the phone will force the flashing of the rollback ( package needed to go back from android 7 to android 6) file. Then you have to download the android 6 firmware for your device from the honor official website again and flash it with the same process of the rollback package. If you can't undestand i can try to explain it in italian
Click to expand...
Click to collapse
shashank1320 said:
Unless you flash the rollback package you can't flash older version. Not sure if rollback package for your model os released
---------- Post added at 03:50 PM ---------- Previous post was at 03:49 PM ----------
Ofcourse you need to flash the stock recovery. Are you trying in twrp?
Click to expand...
Click to collapse
yes i tried to flash twrp with fastboot but cant reboot the phone in twrp recovery
crn4 said:
yes i tried to flash twrp with fastboot but cant reboot the phone in twrp recovery
Click to expand...
Click to collapse
Flash stock recovery and try
shashank1320 said:
Flash stock recovery and try
Click to expand...
Click to collapse
yes i tried a lot of times, i have huawei tool, i tried now another time, but with the tool can't reboot in twrp, and with power and+ also
crn4 said:
yes i tried a lot of times, i have huawei tool, i tried now another time, but with the tool can't reboot in twrp, and with power and+ also
Click to expand...
Click to collapse
Are you able to get into the bootloader?
shashank1320 said:
Are you able to get into the bootloader?
Click to expand...
Click to collapse
what do you mean?
in fastboot (- and pw) i have PHONE unlocked and FRP unlocked
crn4 said:
what do you mean?
in fastboot (- and pw) i have PHONE unlocked and FRP unlocked
Click to expand...
Click to collapse
Just flash the stock recovery there in fastboot. And reboot. Shutdown the phone and use dload method
Basically you missed one thing before restoring stock backup. You should have performed a full factory reset using the second recovery and then restored your TWRP backup.
Your device being stuck on Honor screen is because you forgot to enable encryption (that is done by performing a factory wipe through second recovery).
shashank1320 said:
Just flash the stock recovery there in fastboot. And reboot. Shutdown the phone and use dload method
Click to expand...
Click to collapse
I tried flash stock recovery from different firmwares and after try with dload, but dont work, the device freeze e dont wont boot dload, with recovery from b131 firmware (MM) the dload go on but freeze at 5%, now i try with b389 (Nougat) fw, within 15 minutes I tell you the result
hackslash said:
Basically you missed one thing before restoring stock backup. You should have performed a full factory reset using the second recovery and then restored your TWRP backup.
Your device being stuck on Honor screen is because you forgot to enable encryption (that is done by performing a factory wipe through second recovery).
Click to expand...
Click to collapse
Ahhh ok, and now for recover my phone what i need to do ?
now i flashed boot, cust , recovery and system from b389 firmware but nothing, the phone dont boot, dont want to dload, i dont know what to do....
crn4 said:
Ahhh ok, and now for recover my phone what i need to do ?
Click to expand...
Click to collapse
Follow my guide here https://forum.xda-developers.com/honor-8/how-to/guide-flashing-unapproved-firmwares-t3668306
Before you do it, flash stock Nougat recovery (if you were on EMUI 5) and perform a factory reset. Then flash TWRP again through Fastboot.
Use the TWRP method since you are unable to boot to EMUI. Chose any firmware you want, whether it be Marshmallow or Nougat.
hackslash said:
Follow my guide here https://forum.xda-developers.com/honor-8/how-to/guide-flashing-unapproved-firmwares-t3668306
Before you do it, flash stock Nougat recovery (if you were on EMUI 5) and perform a factory reset. Then flash TWRP again through Fastboot.
Use the TWRP method since you are unable to boot to EMUI. Chose any firmware you want, whether it be Marshmallow or Nougat.
Click to expand...
Click to collapse
i flashed stock recovery from you guide but i cant boot in recovery, i flashed different recoverys, from MM to Nougat but nothing i think this is bootloader problem
edit:
in fastboot i see this
ap_s_abnormal na
what is the signification?
crn4 said:
i flashed stock recovery from you guide but i cant boot in recovery, i flashed different recoverys, from MM to Nougat but nothing i think this is bootloader problem
edit:
in fastboot i see this
ap_s_abnormal na
what is the signification?
Click to expand...
Click to collapse
Are you following the steps exactly as mentioned?
You need to flash TWRP first then setup your device to install the firmware. Read the TWRP section again and follow it exactly as mentioned.
Nothing to worry about that Fastboot status. It is normal.
SOLVED!!!!!! thanks at all people, and very sorry for my English,
i relock end unlock boot loader many times and i flash every is flashable from firmware b131 (boot, system......) and whola!!!! the system dont boot but the dload after this has been restored to work, now i update to last fw and root and dont touch more nothing =D
crn4 said:
SOLVED!!!!!! thanks at all people, and very sorry for my English,
i relock end unlock boot loader many times and i flash every is flashable from firmware b131 (boot, system......) and whola!!!! the system dont boot but the dload after this has been restored to work, now i update to last fw and root and dont touch more nothing =D
Click to expand...
Click to collapse
Damn. I forgot you could simply flash files from Fastboot.
In the future only flash system, cust, vendor, boot and recovery. Do not attempt to flash any other file.
Still, if you want to update to the latest OTA, my guide is always there to help you out.
hackslash said:
Damn. I forgot you could simply flash files from Fastboot.
In the future only flash system, cust, vendor, boot and recovery. Do not attempt to flash any other file.
Still, if you want to update to the latest OTA, my guide is always there to help you out.
Click to expand...
Click to collapse
now i have another problem, i tried to update with stock updator, but from 6 to 7 go wrong, device boot but dont work right, the keyboard dont exist and other lags, try to factory reset but error. after this i flash twrp and format data but see this : failed to mount /cust /system /data; repair or change file system do the same.
if i flash with dload b131 the phone freeze on honor screen

Brick - only fastboot mode working

Hi, I bricked my phone(L29C432) and I don't know what I can do now.
I upgraded via Firmware Finder to EMUI 9. Then I flashed this twrp and flashed this RR rom. After that I did format data in twrp. I don't know what went wrong, but now I can't boot twrp, erecovery or the system. I'm stuck at the "Your device has been unlocked and can't be trusted." screen.
What I can do is enter fastboot mode and flash a recovery via fastboot, but it doesn't boot.
I tried every twrp I could find here. I extracted recovery_ramdis.img from update.app(both EMUI 9 and 8) and flashed it. Nothing will boot.
Can anyone help me please? I'm in despair :silly:
Thanks in advance
mallna said:
Hi, I bricked my phone(L29C432) and I don't know what I can do now.
I upgraded via Firmware Finder to EMUI 9. Then I flashed this twrp and flashed this RR rom. After that I did format data in twrp. I don't know what went wrong, but now I can't boot twrp, erecovery or the system. I'm stuck at the "Your device has been unlocked and can't be trusted." screen.
What I can do is enter fastboot mode and flash a recovery via fastboot, but it doesn't boot.
I tried every twrp I could find here. I extracted recovery_ramdis.img from update.app(both EMUI 9 and 8) and flashed it. Nothing will boot.
Can anyone help me please? I'm in despair :silly:
Thanks in advance
Click to expand...
Click to collapse
Try flashing back stock system from fastboot. System from the build you were on
Always factory reset from stock recovery, never twrp.
ante0 said:
Try flashing back stock system from fastboot. System from the build you were on
Always factory reset from stock recovery, never twrp.
Click to expand...
Click to collapse
Thanks for your reply, ante0.
I flashed system. img, kernel.img and recovery_ramdis.img, extracted from update.app. It doesn't boot.
Do I need to flash some other img files from update.app? (see attached image)

Problem with flashing custom ROM (error 255)

Hey guys,
after searching through different websites and guides you are my last resort to get a custom ROM running on my Redmi S2.
Everytime i try to flash a custom ROM i get the error 255. Here is what i tried until now (bootloader is unlocked):
- flashing twrp(twrp-3.2.1-0-ysl) to recovery using fastboot
- wiping phone (first wipe to disable encryption since miui puts some kind of password on the hard drive that i dont know, second wipe to ensure partitions are clean for new OS)
- mounting phone to pc to transfer OS image (tried Lineage and Havoc, both modified for S2 (ysl version)) and GApps
- finally, installing OS zip (after which i get error message 255, telling me that twrp wasnt able to install the zip file)
please help me out, ask away if something's not clear
flying_shitnugget said:
Hey guys,
after searching through different websites and guides you are my last resort to get a custom ROM running on my Redmi S2.
Everytime i try to flash a custom ROM i get the error 255. Here is what i tried until now (bootloader is unlocked):
- flashing twrp(twrp-3.2.1-0-ysl) to recovery using fastboot
- wiping phone (first wipe to disable encryption since miui puts some kind of password on the hard drive that i dont know, second wipe to ensure partitions are clean for new OS)
- mounting phone to pc to transfer OS image (tried Lineage and Havoc, both modified for S2 (ysl version)) and GApps
- finally, installing OS zip (after which i get error message 255, telling me that twrp wasnt able to install the zip file)
please help me out, ask away if something's not clear
Click to expand...
Click to collapse
change your recovery..
Baim alif said:
change your recovery..
Click to expand...
Click to collapse
Mind elaborating? What do you mean exactly?
flying_shitnugget said:
Mind elaborating? What do you mean exactly?
Click to expand...
Click to collapse
use this recovery
https://files.orangefox.download/OrangeFox-Stable/ysl/OrangeFox-R10.0-1-Stable-ysl.zip
Baim alif said:
use this recovery
https://files.orangefox.download/OrangeFox-Stable/ysl/OrangeFox-R10.0-1-Stable-ysl.zip
Click to expand...
Click to collapse
so... i first tried taking the recovery.img out of the zip and flashing it via fastboot, didnt worked. after that i tried first flashing my old twrp and then (after wiping) installing the whole zip. the install finished successfully, sayed it will restart to recovery in 5 seconds... aaaand got stuck on the android screen. now it wont boot to recovery at all anymore, unless i flash the old twrp again. suggestions?
flying_shitnugget said:
so... i first tried taking the recovery.img out of the zip and flashing it via fastboot, didnt worked. after that i tried first flashing my old twrp and then (after wiping) installing the whole zip. the install finished successfully, sayed it will restart to recovery in 5 seconds... aaaand got stuck on the android screen. now it wont boot to recovery at all anymore, unless i flash the old twrp again. suggestions?
Click to expand...
Click to collapse
try to boot recovery with power button and volume up
Baim alif said:
try to boot recovery with power button and volume up
Click to expand...
Click to collapse
yes, that's what i did. i also tried booting into from fastboot and still nothing.
flying_shitnugget said:
yes, that's what i did. i also tried booting into from fastboot and still nothing.
Click to expand...
Click to collapse
hmmm... try this bro..
https://androidfilehost.com/?fid=6006931924117927913
flying_shitnugget said:
yes, that's what i did. i also tried booting into from fastboot and still nothing.
Click to expand...
Click to collapse
Try this, you have to flash first this in fastboot https://files.orangefox.download/OrangeFox-Beta/ysl/ the R10.0-1 RC1 .img file
And THEN flash this https://orangefox.download/en/device/ysl once you are in the recovery.
Then it worked for me, finally, hope this helps.
celephrn said:
Try this, you have to flash first this in fastboot https://files.orangefox.download/OrangeFox-Beta/ysl/ the R10.0-1 RC1 .img file
And THEN flash this https://orangefox.download/en/device/ysl once you are in the recovery.
Then it worked for me, finally, hope this helps.
Click to expand...
Click to collapse
so i tried this approach. i first installed how you told me to (orangefox R10.0-1 RC1 .img first), but factory reset nor installing the second recovery img worked because of the encryption miui puts on the phone. So i flashed twrp, wiped memory, flashed first orange fox img and from then installed the second img (as a zip). until here everything worked, orange fox told me that he's going to reboot to new recovery -- and i got stuck on the boot logo again. :c
flying_shitnugget said:
so i tried this approach. i first installed how you told me to (orangefox R10.0-1 RC1 .img first), but factory reset nor installing the second recovery img worked because of the encryption miui puts on the phone. So i flashed twrp, wiped memory, flashed first orange fox img and from then installed the second img (as a zip). until here everything worked, orange fox told me that he's going to reboot to new recovery -- and i got stuck on the boot logo again. :c
Click to expand...
Click to collapse
Did you flash the firmware? https://github.com/XiaomiFirmwareUpdater/firmware_xiaomi_ysl/releases/tag/stable-16.03.2020
Other thing you could try is flash the other .img files from https://files.orangefox.download/OrangeFox-Beta/ysl/ and the flash in there the same .zip file you did as before.
celephrn said:
Did you flash the firmware? https://github.com/XiaomiFirmwareUpdater/firmware_xiaomi_ysl/releases/tag/stable-16.03.2020
Other thing you could try is flash the other .img files from https://files.orangefox.download/OrangeFox-Beta/ysl/ and the flash in there the same .zip file you did as before.
Click to expand...
Click to collapse
im currently on MIUI V.10.3.1.0.OEFMIXM | Stable 654M, is it important to flash newer firmware?
flying_shitnugget said:
im currently on MIUI V.10.3.1.0.OEFMIXM | Stable 654M, is it important to flash newer firmware?
Click to expand...
Click to collapse
Could solve the issue, I'd give it a shot!
celephrn said:
Could solve the issue, I'd give it a shot!
Click to expand...
Click to collapse
i suppose you flash it using MiFlash right? If so, i have a problem with flashing new roms using it because my Mi account isnt allowed to do that, i unlocked the bootloader using a tool (dont know if this has something to do with the custom rom problem)
flying_shitnugget said:
i suppose you flash it using MiFlash right? If so, i have a problem with flashing new roms using it because my Mi account isnt allowed to do that, i unlocked the bootloader using a tool (dont know if this has something to do with the custom rom problem)
Click to expand...
Click to collapse
As long as the bootloader is unlocked it should be fine. And no, you should flash the firmware just as you would flash the rom, i. e. from OrangeFox Recovery.
celephrn said:
As long as the bootloader is unlocked it should be fine. And no, you should flash the firmware just as you would flash the rom, i. e. from OrangeFox Recovery.
Click to expand...
Click to collapse
so i flashed the firmware as you said, now neither orangefox or twrp throw me the error "unable to locate storage device", i cant mount the storage to the pc and cant copy the custom rom stuff as well
celephrn said:
As long as the bootloader is unlocked it should be fine. And no, you should flash the firmware just as you would flash the rom, i. e. from OrangeFox Recovery.
Click to expand...
Click to collapse
UPDATE: i finally ****ing did it. So here are the steps that i took (incase anyone has to go through this **** as well)
1. flash MIUI on mobile device using MiFlash (at least i did this by shorting 2 pins on the back)
2. (VERY IMPORTANT!!!) instantly boot to fastboot using Power button + Volume down. this has to be before android starts setting up the phone
3. flash recovery with the image that celephrn provided in this thread
4.boot to recovery by holding Volume up + Power button
5. install the miui update that celephrn provided in this thread
6. reboot to recovery
7. install orange recovery zip that celephrn provided in this thread (phone reboots to recovery)
8. now you can reboot to system (Do NOT (!!!) set the phone up, just let it work its things until you see the MIUI setup screen)
9. Now, finally you can dirty flash your custom rom (and GApps)
10. after flashing the new rom android will throw you alot of errors so you will have to wipe Dalvik/Cache, System, Data and Internal Storage.
11. now you can flash your Rom clean and you're good to go
(huge thanks to celephrn, helped me out after me struggling for a few good weeks with this damn phone)
Baim alif said:
use this recovery
https://files.orangefox.download/OrangeFox-Stable/ysl/OrangeFox-R10.0-1-Stable-ysl.zip
Click to expand...
Click to collapse
bro please help me i have the same issue error 255 on 3.2.1-0 ysl twrp.please help
Farrellclay said:
bro please help me i have the same issue error 255 on 3.2.1-0 ysl twrp.please help
Click to expand...
Click to collapse
so far, what have you done

Categories

Resources