Related
Today I tried to finally update to the latest version of crDroid, but ended up having a bunch of issues doing so, and after a lot of troubleshooting and trying to fix it, I ended up putting it into a bootloop of some sort instead.
I'm pretty sure the last thing I tried was installing a different version of TWRP to see if that version would let me properly install the rom, and stop my phone from always rebooting into recovery mode.
Trying to turn it on normally or boot into TWRP leaves it hanging on the "Redmi" boot screen, it can boot into fastboot mode though.
I'm guessing that the only way to recover my phone at this point is to flash the Official MIUI rom back onto the phone, but that also involves wiping Data and losing pretty much everything I've put on the phone.
I was smart enough to make a TWRP of the Data folder, but while making the backup, the console said it doesn't include all personal files or something.
How much of my personal data and files can I rescue from the phone in this state, and how can I do that before it gets wiped when fixing it?
Also, I think I really need some help in actually restoring my phone and flashing the custom rom properly.
No matter how much effort I put into figuring out how to do this stuff, unexpected issues always seem to happen, and turns something that initially seemed so simple into multiple hours of troubleshooting.
The only way I think i've gotten rom flashing to work at all was by wiping everything and installing the official MIUI rom, but I don't want to be losing my data every month when an update comes out.
So, could someone please help me get my phone working again?
Edit: I ended up fixing my own issue by ADB flashing on a different release of TWRP, and then installing fcrypt disabler after the rom but before everything else.
Sanarise said:
Today I tried to finally update to the latest version of crDroid, but ended up having a bunch of issues doing so, and after a lot of troubleshooting and trying to fix it, I ended up putting it into a bootloop of some sort instead.
I'm pretty sure the last thing I tried was installing a different version of TWRP to see if that version would let me properly install the rom, and stop my phone from always rebooting into recovery mode.
Trying to turn it on normally or boot into TWRP leaves it hanging on the "Redmi" boot screen, it can boot into fastboot mode though.
I'm guessing that the only way to recover my phone at this point is to flash the Official MIUI rom back onto the phone, but that also involves wiping Data and losing pretty much everything I've put on the phone.
I was smart enough to make a TWRP of the Data folder, but while making the backup, the console said it doesn't include all personal files or something.
How much of my personal data and files can I rescue from the phone in this state, and how can I do that before it gets wiped when fixing it?
Also, I think I really need some help in actually restoring my phone and flashing the custom rom properly.
No matter how much effort I put into figuring out how to do this stuff, unexpected issues always seem to happen, and turns something that initially seemed so simple into multiple hours of troubleshooting.
The only way I think i've gotten rom flashing to work at all was by wiping everything and installing the official MIUI rom, but I don't want to be losing my data every month when an update comes out.
So, could someone please help me get my phone working again?
Click to expand...
Click to collapse
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Simoom Sadik said:
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Click to expand...
Click to collapse
Unfortunately, I can't.
Trying to boot into TWRP just gets stuck on the 'Redmi' boot logo.
I just remembered that you can install TWRP over ADB, and that Peter's one says it works even when the system partition is empty, so maybe the issue is the TWRP I installed and could possibly undo this part of the issue over ADB.
It won't fix the issue preventing my from updating my rom, but recovery only is still better than a soft brick.
Edit: That worked, i've put Peter's TWRP back on, and it's launching into recovery mode/TWRP again now
twrp not boot after successfully flash in this rom
Sanarise said:
Unfortunately, I can't.
Trying to boot into TWRP just gets stuck on the 'Redmi' boot logo.
I just remembered that you can install TWRP over ADB, and that Peter's one says it works even when the system partition is empty, so maybe the issue is the TWRP I installed and could possibly undo this part of the issue over ADB.
It won't fix the issue preventing my from updating my rom, but recovery only is still better than a soft brick.
Edit: That worked, i've put Peter's TWRP back on, and it's launching into recovery mode/TWRP again now
Click to expand...
Click to collapse
flash latest twrp download from github, install twrpbuilder img twrp ,it boot fine and you will copy your data to pc and then install any other twrp img which u want , dont wipe anything from phone before phone boot.flash only original twrp builder 3.2.3.1 official,it boot only on latest updates.
Why nobody use orangefox?
is your issue solve or not tell,
Simoom Sadik said:
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Click to expand...
Click to collapse
if your problem is not solve then tell me you need to flash a fastboot rom first with save user data.bat file and when it installed then you can install twrp builder 3.2.1. and then boot to twrp this methods working fine,if you recently flashed any android 10 rom then first you need to flash a miui fastboot rom,or flash it via command mode direct only 3 files
first click on extract a fastboot rom and copy boot system and vender file with flash.all bat file and make a new folder then click on flash.bat save user data file to flash these images
or you can do this manually
fastboot flash system system.img
fastboot flash vender vender.img
fastboot flash boot boot.img
then reboot device to fastboot again
now flash latest official twrp builder 3.2.3.1 img twrp and take all your data backup,
in fastboot flash latest miui do not downgrade direct otherwise you lost your data,
after this if you sucess then you can flash your old rom which is running before issue of boot loop of redmi logo
it will deincrypt your data safely and then root device and boot normally, if you lost anything then contact me with mail or whatsapp i will help you,7009197673 india
and this twrp work on all version from chines to global beta stable and indian stable
joke19 said:
Why nobody use orangefox?
Click to expand...
Click to collapse
In the end, I did try orangefox, and it might have been part of why it worked.
However, the crDroid installation instructions specifically mentions using Peter's TWRP, so I initially used that one.
anmoltinder said:
if your problem is not solve then tell me you need to flash a fastboot rom first with save user data.bat file and when it installed then you can install twrp builder 3.2.1. and then boot to twrp this methods working fine,if you recently flashed any android 10 rom then first you need to flash a miui fastboot rom,or flash it via command mode direct only 3 files
Click to expand...
Click to collapse
Thank you for the effort you put into typing up a guide to help me, but I ended up fixing my own problem.
I was able to use fastboot to flash on a better TWRP release, and then get the rom to install properly by installing fcrypt-disabler just after it.
Sanarise said:
Today I tried to finally update to the latest version of crDroid, but ended up having a bunch of issues doing so, and after a lot of troubleshooting and trying to fix it, I ended up putting it into a bootloop of some sort instead.
I'm pretty sure the last thing I tried was installing a different version of TWRP to see if that version would let me properly install the rom, and stop my phone from always rebooting into recovery mode.
Trying to turn it on normally or boot into TWRP leaves it hanging on the "Redmi" boot screen, it can boot into fastboot mode though.
I'm guessing that the only way to recover my phone at this point is to flash the Official MIUI rom back onto the phone, but that also involves wiping Data and losing pretty much everything I've put on the phone.
I was smart enough to make a TWRP of the Data folder, but while making the backup, the console said it doesn't include all personal files or something.
How much of my personal data and files can I rescue from the phone in this state, and how can I do that before it gets wiped when fixing it?
Also, I think I really need some help in actually restoring my phone and flashing the custom rom properly.
No matter how much effort I put into figuring out how to do this stuff, unexpected issues always seem to happen, and turns something that initially seemed so simple into multiple hours of troubleshooting.
The only way I think i've gotten rom flashing to work at all was by wiping everything and installing the official MIUI rom, but I don't want to be losing my data every month when an update comes out.
So, could someone please help me get my phone working again?
Edit: I ended up fixing my own issue by ADB flashing on a different release of TWRP, and then installing fcrypt disabler after the rom but before everything else.
Click to expand...
Click to collapse
help.I woke up yesterday and I turned on my phone and it is stuck on the Mi logo.All i can do is get it to fastboot thing.It seems like you and I have the same problem and I would love to have some help from you
Fcsubxrhi said:
help.I woke up yesterday and I turned on my phone and it is stuck on the Mi logo.All i can do is get it to fastboot thing.It seems like you and I have the same problem and I would love to have some help from you
Click to expand...
Click to collapse
If you can access fastboot, then flash TWRP.... Enter recovery, wipe your system partitions and then flash the Stock MIUI ROM or use the MiFlash tool. Make sure you aren't flashing an older version of the ROM than the onle already installed.
CongestedHangman said:
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Click to expand...
Click to collapse
I have the same problem that stated after installing the update for derpfest and I can boot into twrp. Any solution for me?
Well, not fully bricked, but it's completely non-working just the same.
I've had the K1 for a few years now and have been fine with the standard, stock OTA updates. Recently though I've been seeing constant notifications that I'm short on ram and after uninstalling apps, deleting old files, it would work ok for a few days and then start complaining about low memory again. So I figured that something must be corrupt and now is a good a time as any to root and see about flashing a new rom.
I've owned many android devices over the years and have rooted and patched most of them. so I'm familiar with the tools.
This time however, I think I must have crossed something up somewhere.
What I did was this:
Grabbed the minimal ADB package and fastboot drivers.
Booted into the bootloader and ran the fastboot oem unlock. No problem.
From the nVidia site, I then grabbed and flashed the latest stock image and recovery, just to ensure I was on a clean slate. No problem.
Flashed the latest TWRP for the device. No problem.
Flashed SuperSU. No problem.
Booted into the stock system to make sure everything was still working and it was. But, this is the start of where I maybe hosed things up(?).
While running stock, I converted the SD card to internal memory, just so I wasn't having to mess with it later, not thinking that I'd have to do it again anyway after flashing a new rom.
Rebooted back to TWRP and proceeded to flash the new rom (AOSP Extended (AEX) 5.8).
I flashed it by way of the sideload method rather than from a zip file sitting on the SD card. This all seemed to work just fine.
Next I went ahead and flashed OpenGapps Mini. This resulted in an error 70 and after reading about it, it was a simple matter of going into the advanced settings in TWRP and extending the system partition. Did that and OpenGapps then flashed with no problem.
Finally I wrapped it up by flashing tegra124-tn8-p1761-1270-a04-e-battery.dtb and rebooted.
... Nothing. Now I know that when flashing a new rom, the first boot can take some time, but I let it sit for about 2 hours with no result. It didn't appear to be boot looping, but instead just stuck on the nVidia boot screen. Forced it to boot back to the bootloader and brought up TWRP. I obviously did something wrong, so I prepared to reflash the stock image.
Did the wipe, flashed the files and rebooted. Again, nothing.
This time however, not only can I not boot to the system, I now also can't get back into recovery.
No matter how many times I reboot, or attempt to reflash anything, it hangs on the boot screen when attempting to get back into recovery.
So I'm stuck. I've tried reflashing TWRP, stock recovery and stock system, with the SD card in and out, a number of times, all with no joy.
I can access the bootloader, so I can at least run fastboot commands, but that's all I can do. Without being in recovery, I can't access an ADB shell if I need to repair anything.
If you're still with me after this rambling mess, do I have any hope at all in recovering this thing?
Hi,
I think the problem is in the modified .dtb try flash the original file.
Or : https://forum.xda-developers.com/showpost.php?p=82359331&postcount=39
greetings
kozaqu said:
Hi,
I think the problem is in the modified .dtb try flash the original file.
Or : https://forum.xda-developers.com/showpost.php?p=82359331&postcount=39
greetings
Click to expand...
Click to collapse
That got me in the right direction and I can at least get back into recovery now. Thanks! :good:
Also in the same boat
mkhopper said:
Well, not fully bricked, but it's completely non-working just the same.
I've had the K1 for a few years now and have been fine with the standard, stock OTA updates. Recently though I've been seeing constant notifications that I'm short on ram and after uninstalling apps, deleting old files, it would work ok for a few days and then start complaining about low memory again. So I figured that something must be corrupt and now is a good a time as any to root and see about flashing a new rom.
I've owned many android devices over the years and have rooted and patched most of them. so I'm familiar with the tools.
This time however, I think I must have crossed something up somewhere.
What I did was this:
Grabbed the minimal ADB package and fastboot drivers.
Booted into the bootloader and ran the fastboot oem unlock. No problem.
From the nVidia site, I then grabbed and flashed the latest stock image and recovery, just to ensure I was on a clean slate. No problem.
Flashed the latest TWRP for the device. No problem.
Flashed SuperSU. No problem.
Booted into the stock system to make sure everything was still working and it was. But, this is the start of where I maybe hosed things up(?).
While running stock, I converted the SD card to internal memory, just so I wasn't having to mess with it later, not thinking that I'd have to do it again anyway after flashing a new rom.
Rebooted back to TWRP and proceeded to flash the new rom (AOSP Extended (AEX) 5.8).
I flashed it by way of the sideload method rather than from a zip file sitting on the SD card. This all seemed to work just fine.
Next I went ahead and flashed OpenGapps Mini. This resulted in an error 70 and after reading about it, it was a simple matter of going into the advanced settings in TWRP and extending the system partition. Did that and OpenGapps then flashed with no problem.
Finally I wrapped it up by flashing tegra124-tn8-p1761-1270-a04-e-battery.dtb and rebooted.
... Nothing. Now I know that when flashing a new rom, the first boot can take some time, but I let it sit for about 2 hours with no result. It didn't appear to be boot looping, but instead just stuck on the nVidia boot screen. Forced it to boot back to the bootloader and brought up TWRP. I obviously did something wrong, so I prepared to reflash the stock image.
Did the wipe, flashed the files and rebooted. Again, nothing.
This time however, not only can I not boot to the system, I now also can't get back into recovery.
No matter how many times I reboot, or attempt to reflash anything, it hangs on the boot screen when attempting to get back into recovery.
So I'm stuck. I've tried reflashing TWRP, stock recovery and stock system, with the SD card in and out, a number of times, all with no joy.
I can access the bootloader, so I can at least run fastboot commands, but that's all I can do. Without being in recovery, I can't access an ADB shell if I need to repair anything.
If you're still with me after this rambling mess, do I have any hope at all in recovering this thing?
Click to expand...
Click to collapse
I'm also sort of in the same boat i had a custom rom installed and decided to go back to stock os and now i'm stuck at either the Nvidia Logo or the Fastboot menu there's nothing else it let's me do i'd take any advice at this point. I can use Fastboot commands and I've tried Flashing Twrp.img and also flashing all the stock os which goes through with no problems i reboot the device and it's just stuck at the Nvidia logo
Ps: how did you manage to get back into recovery
Hello.
I think i had the same Problem.
I Flashed a Custom Rom, MiniGapps and the tegra...Battery file and since then i had boot loop an the NVidia Logo.
The Problem was: i flashed the tegra-Battery.ZIP file!!!
I noticed that i have to unzip it and flash teh tegra-..battery.DTP file.
since then it booted up again.
the OpenGappMini was buggy. it worked with the Nano!
Hope this helps for you as well!
OMG you guys. I did the exact same damn thing. Flashed the ZIP instead of the DTP file. 100 million thanks to you. I'm going to give it a shot now.
It worked! I wonder how many other folks didn't realize it wasn't a zip to flash to dtb and bricked their devices.
Hi everyone,
I've been trying to get TWRP to stick for a while now, but still haven't been able to get it to install. A while ago I managed to flash Resurrection Remix using Lineage recovery which does work, but since Lineage recovery is quite limited, I really wanted to get TWRP to work. Since TWRP 3.5.0 released yesterday, I gave it another shot hoping that they fixed the issue, to no success.
I can get into TWRP just fine by temp booting it with fastboot, but after flashing the installer zip, any recovery that was previously installed gets wiped and the device will reboot when trying to get into recovery. I can still boot my phone otherwise.
The steps I took to get to this point:
Unlocked bootloader
fastboot boot twrp.img
Decrypt using screen pattern (successfully)
Flashed twrp installer zip (no error messages, process finishes successfully)
Reboot into recovery (both from twrp and bootloader at a later point)
Things I've tried:
Use a different TWRP version. Same problem as described above on both 3.4.x and 3.5.x, can't get it to decrypt on lower versions due to Android 10.
Install to recovery ramdisk, this just breaks things even more, probably because it's an A/B device?
Try a different recovery. Lineage recovery works just fine, but it's very very limited. Would really like to get TWRP working.
Trying to flash the zip results in no error messages, but any previously installed recovery gets wiped and magisk is uninstalled, which leads me to believe that it has done at least something to the boot img.
Thank you in advance.
EDIT 25.02.2021:
- Attached TWRP log
EDIT 12.03.2021:
- Log didn't want to attach, they can be found here: https://pastebin.com/awnhHDBU
Same question here. It seems that you can only boot from TWRP, not install it.
Tried installing again today, to no avail. However, I was smart enough to save the log this time. I have attached it to the main post, would be much appreciated if someone could check it out.
I have a Redmi note 8 with MIUI 12 installed. Bootloader is unlocked and the phone is rooted.
When I try to flash TWRP recovery in fastboot mode using my PC, it successfully flashes and boots into the TWRP recovery. TWRP does not ask for any password for decrypting the files, and when I go to install>sdcard then the storage is all in random letters, completely unrecognizable.
I have tried a lot of tutorials on youtube but none of them worked. I tried flashing the latest version of TWRP, didn't work. I tried formatting all data and rebooting back into recovery mode, didn't work. (if you reboot to system after installing TWRP, the phone automatically deletes TWRP and the next time you open recovery mode you just get the default MI recovery, and you have to flash TWRP again to open TWRP recovery.) I tried almost everything on the internet but none of it worked. Is there any way I can make it ask for the decryption password? or have my files decrypted? I just need the TWRP for a one-time-use to install a custom ROM. I don't need it to be installed permanently, but no problem even if it does get installed permanently. I just want my custom ROM.
Please help
does that work?:
Boot into twrp, then
Code:
adb shell
twrp decrypt myPassword
(myPassword is your user password)
User699 said:
does that work?:
Boot into twrp, then
Code:
adb shell
twrp decrypt myPassword
(myPassword is your user password)
Click to expand...
Click to collapse
It didnt work, "failed to decrypt data" i typed the right password
#JKTheBaskieBoy said:
It didnt work, "failed to decrypt data" i typed the right password
Click to expand...
Click to collapse
Okay, interessting. What's the exact error?
However, since you only want to use twrp to flash a custom OS, you could try to boot twrp (without flashing)
Code:
fastboot boot twrp.img
and then wipe data via twrp and then install your custom OS. You can use sideload which should be located under "advanced" I guess.
Code:
adb sideload myCustomOS.zip
EDIT: Don't boot out of twrp before sideloading, since your os should encrypt everything again after wiping which makes it unpossible for twrp to decrypt again (at least in your case, since it failed for some reason).
If you booted out of twrp, just wipe again and then sideload.
the correct and recommend way to install TWRP is
Flash TWRP
Erase userdata partition <~ it's important to do this as soon as possible since booting your device would just encrypt everything again
Format userdata partition
by doing this you would be able to access data partition files and folder would not be random letters.
User699 said:
Okay, interessting. What's the exact error?
However, since you only want to use twrp to flash a custom OS, you could try to boot twrp (without flashing)
Code:
fastboot boot twrp.img
and then wipe data via twrp and then install your custom OS. You can use sideload which should be located under "advanced" I guess.
Code:
adb sideload myCustomOS.zip
EDIT: Don't boot out of twrp before sideloading, since your os should encrypt everything again after wiping which makes it unpossible for twrp to decrypt again (at least in your case, since it failed for some reason).
If you booted out of twrp, just wipe again and then sideload.
Click to expand...
Click to collapse
Sorry for the late reply. Earlier i just gave up on installing the custom ROM and continued with my stock from. Today a tried again, installed TWRP and turns out it is not showing random letters now. its all regular storage. i didn't even do anything to decrypt it lol it just fixed itself. Now I will install the room myself. Thank you for your help though
Ah sh** here we go again. So i installed the custom rom successfully and everything worked fine, the TWRP too. but when I tried to flash a magisk patched image (the image that I used to root my phone in MIUI) then it got stuck in the boot screen. I had to flash the stock fastboot rom again.. And as expected from my piece of **** that xiaomi calls a phone, TWRP will show encrypted folders, and does not ask for a password. Same problem. Rooted my phone again, using the magisk root image, and it worked like usual, the phone rooted. Now i am stuck again in this bs. I guess I will wait for about 4-5 days and continue using the phone like normal. Maybe it will work again this time. I will try your method here first
User699 said:
Okay, interessting. What's the exact error?
However, since you only want to use twrp to flash a custom OS, you could try to boot twrp (without flashing)
Code:
fastboot boot twrp.img
and then wipe data via twrp and then install your custom OS. You can use sideload which should be located under "advanced" I guess.
Code:
adb sideload myCustomOS.zip
EDIT: Don't boot out of twrp before sideloading, since your os should encrypt everything again after wiping which makes it unpossible for twrp to decrypt again (at least in your case, since it failed for some reason).
If you booted out of twrp, just wipe again and then sideload.
Click to expand...
Click to collapse
Okay i tried wiping the data, cache and dalvik but it shows a huge essay of "error opening xxx/xxxx" in red text. Data wipe failed.
See you after like 4-5 days... hopefully
Update. I finally found a solution. It took literal hours of experimenting to find this.
-Flashed the fastboot ROM of the phone
-Rooted the phone by flashing magisk patched image
-Flashed Inception kernel via FK kernel manager
-Rebooting after flashing the kernel, It will get stuck in a black screen with no text whatsoever (probably a bootloop)
-Installed TWRP (This time TWRP does not show encrypted letters), Wiped all data, Transferred the custom ROM zip to the phone (while in TWRP) and flashing the rom
-The rom is flashed successfully. On the first reboot you get greeted with another bootloop. Fortunately the phone booted into TWRP. This time the folders are encrypted again.
-Successfully wiped the data (advanced>wipe data). No errors in data wiping this time.
-A fully working Corvus OS setup appears on rebooting.
I think the whole TWRP problem was fixed by the custom kernel. Anyways I am finally done with this now. You probably enjoyed seeing all this xD
#JKTheBaskieBoy said:
Update. I finally found a solution. It took literal hours of experimenting to find this.
-Flashed the fastboot ROM of the phone
-Rooted the phone by flashing magisk patched image
-Flashed Inception kernel via FK kernel manager
-Rebooting after flashing the kernel, It will get stuck in a black screen with no text whatsoever (probably a bootloop)
-Installed TWRP (This time TWRP does not show encrypted letters), Wiped all data, Transferred the custom ROM zip to the phone (while in TWRP) and flashing the rom
-The rom is flashed successfully. On the first reboot you get greeted with another bootloop. Fortunately the phone booted into TWRP. This time the folders are encrypted again.
-Successfully wiped the data (advanced>wipe data). No errors in data wiping this time.
-A fully working Corvus OS setup appears on rebooting.
I think the whole TWRP problem was fixed by the custom kernel. Anyways I am finally done with this now. You probably enjoyed seeing all this xD
Click to expand...
Click to collapse
I like that you keep trying and finding a solution, even though you had to invest hours to make it work!
Let's hope it will work if you update the OS though – I'd actually suggest a backup of all of your data before you do an update in the future, just to be safe!
#JKTheBaskieBoy said:
I have a Redmi note 8 with MIUI 12 installed. Bootloader is unlocked and the phone is rooted.
When I try to flash TWRP recovery in fastboot mode using my PC, it successfully flashes and boots into the TWRP recovery. TWRP does not ask for any password for decrypting the files, and when I go to install>sdcard then the storage is all in random letters, completely unrecognizable.
I have tried a lot of tutorials on youtube but none of them worked. I tried flashing the latest version of TWRP, didn't work. I tried formatting all data and rebooting back into recovery mode, didn't work. (if you reboot to system after installing TWRP, the phone automatically deletes TWRP and the next time you open recovery mode you just get the default MI recovery, and you have to flash TWRP again to open TWRP recovery.) I tried almost everything on the internet but none of it worked. Is there any way I can make it ask for the decryption password? or have my files decrypted? I just need the TWRP for a one-time-use to install a custom ROM. I don't need it to be installed permanently, but no problem even if it does get installed permanently. I just want my custom ROM.
Please help
Click to expand...
Click to collapse
tell me how to turn off a smartphone with a non-working sensor?
you can still use adb push command from pc to transfer files to your phone :
adb push "nameoffile" /sdcard
(place the file in your adb folder) I was able to root a phone that had this issue using this technique.
I think u should flash dm verity becoz when i flashed the rom and flashed dm verity it worked fine
Hello everyone! Thanks in advance for taking a look at this thread.
I recently upgraded from a Pixel 2 to a Pixel 5 and decide to root my old phone and mess around with that before doing the same with my new phone. It's been several years since I've messed around with rooting a device, so I've spent some time this week refreshing myself on how to do so.
I've already unlocked my bootloader, but the main issue that I'm running into is when I try to install TWRP or Magisk. For some reason, when I try to flash TWRP (version 3.3.0.0), I've managed to install it properly but loading into recovery mode just leaves me stuck at the TWRP splash screen, while booting directly into it doesn't allow me to backup my data (kicking out an error 255 each time). It would be nice to have TWRP to be able to back up rather than starting from scratch each time, even if I've gotten quick at flashing the stock image when I screw up later.
As for Magisk, I've tried flashing the patched boot image through TWRP and received errors (size of image is larger than target device) as well as the .zip file which just caused a bootloop. I know you can install Magisk without TWRP, so I've tried doing that as well. I've been working with both Magisk 23.0 and the Canary build with no luck; after patching the boot image and attempting to flash it using fastboot flash boot magisk_patched.img, I just repeatedly get an error showing "FAILED (remote: 'Error flashing partition')".
So far I've not really been able to find any solutions on how to fix this, so I feel a bit stuck at this point (and definitely questioning my ability to just follow directions). Any advice on how I might get around these errors?
Hello mate,
With regards to installing twrp, I think there is a workaround in the official twrp thread to get twrp installed with working decryption and working pin by rolling back to a pie build prior to encryption being broken for twrp. Personally I just fastboot it when needed to flash anything but sadly twrp back ups don't work (I'm on A11).
It sounds as if you have tried to install magisk a few ways but I found the simplest way was to install the latest magisk.apk then rename it to magisk.zip and flash it via fasbooted twrp.
It sounds as if you tried patching the image etc so may pay to reflash the stock boot.img and then do the APK/zip method to get magisk running.
Lastly, if you don't mind losing your data it may well pay to reflash a full stock.img and then try magisk again. It's solved a few dramas for me when stuff didn't seem to work first time round.