Hi,
Could someone tell me the default values under the Light Sensor option? I accidentally changed it and now I can't remember the default values
Thanks
This is the default values on my TD2:
- Light sensor polling: Disabled
- Light sensor polling interval: 0
- Light sensor threshold: 0
- Light sensor threshold to turn screen off: 0
Thanks a lot!!!!!!!!
Hi,
My Nexus-S colors are bugged (browned colors (pb with red value)).
I'm looking for a list of kernels with pre-2.3.3 color drivers.
voodoo color drivers is an option but it didn't work on all luminosity values (green tint on low luminosity, or bad color at certain luminosity).
for info my voodoo colors imperfect tweak :
# Settings with no green tint, but with bad colors at low luminosity :
echo "-80" > /sys/class/misc/voodoo_color/red_v1_offset
echo "-15" > /sys/class/misc/voodoo_color/green_v1_offset
echo "0" > /sys/class/misc/voodoo_color/blue_v1_offset
# Other setting option (better colors but green tint at low luminosity):
echo "-102" > /sys/class/misc/voodoo_color/red_v1_offset
echo "-54" > /sys/class/misc/voodoo_color/green_v1_offset
echo "-52" > /sys/class/misc/voodoo_color/blue_v1_offset
Click to expand...
Click to collapse
List of found kernels with pre-2.3.3 colors as of now :
- Lucid Nexus : The CM7.1 version is fine, but the ics one is instable. This kernel doesn't seem to be in active developement.
- Matrix Patched : not tested for now, don't know if he is in active dev (patched version : 15, non-patched version 22).
- to be continued ...
Thanks for your help !
joobi said:
Hi,
My Nexus-S colors are bugged (browned colors (pb with red value)).
I'm looking for a list of kernels with pre-2.3.3 color drivers.
voodoo color drivers is an option but it didn't work on all luminosity values (green tint on low luminosity, or bad color at certain luminosity).
for info my voodoo colors imperfect tweak :
List of found kernels with pre-2.3.3 colors as of now :
- Lucid Nexus : The CM7.1 version is fine, but the ics one is instable. This kernel doesn't seem to be in active developement.
- Matrix Patched : not tested for now, don't know if he is in active dev (patched version : 15, non-patched version 22).
- to be continued ...
Thanks for your help !
Click to expand...
Click to collapse
Your colors are that garbled?? I'd take that phone to repair if you have to set the red value this low. This is also why you're getting a green tint on low brightness settings. If your rom supports it you could also change the default lowest brightness settings so you never get to see the green tint, except when you turn the phone on for a few miliseconds.
As far as I'm aware CM9 based roms support it, cannot talk about others.
Yes my colors are that garbled (but zero pbs with pre-2.3.3 divers).
Maybe an hardware pb ? But I'm not the only one having trouble with colors.
I've got this phone for free because of the garbled colors, I can't take it to repair.
In my experience the green tint come from the green offset (less than -34 => green tint)
For me pre-2.3.3 driver is the best option : work out of the box, with no-tuning/tweaks.
joobi said:
Yes my colors are that garbled (but zero pbs with pre-2.3.3 divers).
Maybe an hardware pb ? But I'm not the only one having trouble with colors.
I've got this phone for free because of the garbled colors, I can't take it to repair.
In my experience the green tint come from the green offset (less than -34 => green tint)
For me pre-2.3.3 driver is the best option : work out of the box, with no-tuning/tweaks.
Click to expand...
Click to collapse
The green tint is in direct correlation with the gamma to brightness ratio, not just the gamma. So pre 2.3.3 drivers without any setting and your colors are fine? Or you mean pre 2.3.3 colors with manual settings?
So pre 2.3.3 drivers without any setting and your colors are fine?
Click to expand...
Click to collapse
yes that's it !
joobi said:
yes that's it !
Click to expand...
Click to collapse
That is strange! :|
Stock ICS kernel is not good, yet pre 2.3.3 colors without setting anything works. Are you sure it's not just an issue with Voodoo colors?
Yes i'm sure it's not a voodoo issue, I've started with stock ics (no voodoo, no pre-2.3.3 drivers) and the colors was brownish.
Hi
First Sorry for my bad Englisch.
Is it Possible to chance the Disyplay Contrast and Color Saturate.
Stock Room 4.1.2 with Root.
The Display on the 511 ist Washed Out.
Screen Adjuster not Help. The Minimum Contrast are 0. I Need - Values?
And here is not to Set Color Saturate.
Anybody manage to create a custom colour profile for srgb mode? I prefer the less saturated and slightly cooler colours but the whites are too reddish /yellowish.
Using Elementalx kernel and manager. Currently set as RGB 225/220/255
Currently set as RGB 246/226/256
Try mine, but it's not sRGB though
Red - 237
Green - 242
Blue - 256
Saturation - 20
Value - 129
Contrast - 143
Hue - 0
Hello all,
I am using the ElementalX kernel for the custom color control (RGB 255,0,0 at night is my life). On the OP7t however the fingerprint sensor does not work with custom colors.
I know that I can find the "is scanning fingerprint" status using tasker and would like to disable custom colors for 500ms while it scans. I can't find any way however to control ElementalX custom colors through a shell command.
Does anyone have an idea how to approach this?
Ps. I wanted to post in the development/modding board but have no post count.