In the box comes a USB-c port adapter. But it's got another name. It's an OTG ( on the go ) adapter. What's that ? Think you're in trouble with that measly 128GB phone storage ? So . . . ( wait for it ) . . . Plug in the OTG adapter and then plug in a trusty old USB-a 'flash drive'. What's that spec on the pixel port ? What ? It's 3.2 speed. Nice.
.
Wow, these flash drives don't cost much at all !
Used to use those to flash custom roms and other things on my Nexuses.
Plugged in two different FLASH drives and they worked. I tried a Samsung and a SanDisk. Samsung states 3.1 on its packaging. Pixel functionality looks good. Reading and writing files.
.
I went to play store and downloaded USB Host Test and it dumps out all that spec mumbo jumbo . Hmm, version says 2.1 Well is that the destination capability ?
Related
Has anyone here used any of these multi usb sd card connectors on ebay and amazon?
http://www.amazon.com/OEM-Connectio...KK/ref=sr_1_19?ie=UTF8&qid=1337138991&sr=8-19
http://www.amazon.com/Samsung-Galax...X2/ref=sr_1_28?ie=UTF8&qid=1337138991&sr=8-28
They look like they are Shanzhai (Chinese knockoffs) rather than Samsung made, but if they worked as they advertise, it'd be good price. I just don't want to spend 30-40 dollars on the official connection kit.
Amazon reviews are mixed, so I was hoping somepne on XDA had tried them. All feedback would be appreciated. Thanks!
The one like that I got from IDS does not work.
This one does: http://www.amazon.com/New-Samsung-Reader-Galaxy-EPL-1PREBEGXAR/dp/B007PTWPDY
Jnn1 said:
Has anyone here used any of these multi usb sd card connectors on ebay and amazon?
http://www.amazon.com/OEM-Connectio...KK/ref=sr_1_19?ie=UTF8&qid=1337138991&sr=8-19
http://www.amazon.com/Samsung-Galax...X2/ref=sr_1_28?ie=UTF8&qid=1337138991&sr=8-28
They look like they are Shanzhai (Chinese knockoffs) rather than Samsung made, but if they worked as they advertise, it'd be good price. I just don't want to spend 30-40 dollars on the official connection kit.
Amazon reviews are mixed, so I was hoping somepne on XDA had tried them. All feedback would be appreciated. Thanks!
Click to expand...
Click to collapse
I have one and it works, However they have a switch to change between SD and USB so you cant use both at the same time
Do they work with custom roms as well?
I have this one www_dot_dealextreme_dot_com/p/multifunctional-card-reader-usb-hub-for-samsung-galaxy-tab-10-1-black-max-16gb-109775?item=48
(replace "_dot_" by the "." Engine of the forum do not allow to me post the normal links). Works very well! If you connect it to the AC adapter (it has short cable for the USB AC adapter) you can use SD CARD and USB Bar/keyboard/mouse at the same time! If you do not connect it to AC you can use any one port because of the device power limitation.
DX accesoires sometimes tight fit
Maximsu said:
I have this one www_dot_dealextreme_dot_com/p/multifunctional-card-reader-usb-hub-for-samsung-galaxy-tab-10-1-black-max-16gb-109775?item=48
(replace "_dot_" by the "." Engine of the forum do not allow to me post the normal links). Works very well! If you connect it to the AC adapter (it has short cable for the USB AC adapter) you can use SD CARD and USB Bar/keyboard/mouse at the same time! If you do not connect it to AC you can use any one port because of the device power limitation.
Click to expand...
Click to collapse
I have ordered an extra USB cable and a cable to USB port (for gamepad connection), the extra cable was a very tight fit. Had to force it to much in my opinion. How's that with this accessorie?
I have an official samsung one that has never been opened that I probably will never use that I'm looking to get rid of for $10 shipped. I exclusively use my tablet in the car so its docked 100% of the time and therefore can't really use an accessory that relies on the docking port
please email me at agasthya at gmail dot com if you're interested.
Hello, anybody here with an Idol 3 that keeps ejecting flash drives plugged into the micro usb using a USB OTG cable? I have used 2 flash drives and 3 OTG cables and it still keeps on ejecting by itself. Thanks.
Are those flash drives within spec? If they draw more than 500 mA @ 5V, then they are NOT in spec and hence why the drives keep dropping out. Typically that means a USB 2.0 drive should be used. Or a OTG USB drive (I have one) since those have to be in spec otherwise their OTG usefulness goes out the window).
The same flash drives and otg cables worked with all my other phones so I don't think there's any problem with them. I ended up returning the phone since I was also having problems with crappy photos in low light. I have a zenfone 2 which is pretty comparable to this phone and the photos are better in low light plus no noticeable lag unlike with the idol 3. The only thing I really liked with the idol 3 were the stereo speakers which I'm missing right now.
I dont think this phones kernel supports otg. Says USB host diagnostics. BUELLER?
I tried otg also, in 9 of 10 cases, phone reject usb, in one case connections was achieved, and i can copy files from usb. But, even in that case, after some time, connection brakes. Annoying.
5.5 idol 3 android 5.0.2 .. I have used this phones OTG with flash drive, copy move paste all work and other usb devices also work.
My 5.5 idol 3 android 5.0.2 keeps ejecting USB disk CONFIRM
The Samsung T3 external SSD is USB type C and is extremely fast. Using the stock cord that came with my phone I can make a twrp backup faster than to the internal storage.
Anyone else use one?
Bluemgt06 said:
The Samsung T3 external SSD is USB type C and is extremely fast. Using the stock cord that came with my phone I can make a twrp backup faster than to the internal storage.
Anyone else use one?
Click to expand...
Click to collapse
That's because your phone has to read and write from flash at the same time. My OTG cable and USB 3.0 drive i've had for 2 years os still faster than backing up internally also. But I agree, the T3 would probably super tots.
The T3 is also very fast with the computer. Transfers 5gb in seconds
Link
Sent from my Nexus 6P using Tapatalk
This is the one I have (250GB) they have up to a 2TB.
http://smile.amazon.com/Samsung-Por...TF8&qid=1457975173&sr=1-3&keywords=samsung+t3
Gytole said:
That's because your phone has to read and write from flash at the same time. My OTG cable and USB 3.0 drive i've had for 2 years os still faster than backing up internally also. But I agree, the T3 would probably super tots.
Click to expand...
Click to collapse
I've tried hooking up my otg micro USB cable with flash drive. But 6p isn't reading. I figured it can't transmit data micro USB style. Is that why its not reading it? Have you tried that @Gytole?
dontbeweakvato said:
I've tried hooking up my otg micro USB cable with flash drive. But 6p isn't reading. I figured it can't transmit data micro USB style. Is that why its not reading it? Have you tried that @Gytole?
Click to expand...
Click to collapse
Can't day I have trird it but i'm surprised it doesnt work! I have a coyple old otg cables laying around i'll see if I can conjur up something with my 6P anf see what happens. I just use my USB C to USB otg with my Silicon Power fladh drives. Works fantastatiddies
Gytole said:
Can't day I have trird it but i'm surprised it doesnt work! I have a coyple old otg cables laying around i'll see if I can conjur up something with my 6P anf see what happens. I just use my USB C to USB otg with my Silicon Power fladh drives. Works fantastatiddies
Click to expand...
Click to collapse
I used micro usb otg cable, then micro USB to type c adapter, into 6p. Im saying I used a type c adapter and I think that's why it wasn't connecting to the flash drive but either way whatever happened it was not connecting and I tried numerous times I even tried apps like stickmount
Whether the nexus 6p works with exfat or NTFS formatted drive
Please confirm
3rd party app will mount exFAT-formatted T3
dontbeweakvato said:
I used micro usb otg cable, then micro USB to type c adapter, into 6p. Im saying I used a type c adapter and I think that's why it wasn't connecting to the flash drive but either way whatever happened it was not connecting and I tried numerous times I even tried apps like stickmount
Click to expand...
Click to collapse
I just took another pass at getting my 6P to work with my exFAT-formatted T3, and this time around (Android 7.1.2) saw multiple paths to success.
Firstly, this time, when I plugged in my device, the system presented a notification, which led to a dialog asking if I wanted to "format the device for mobile data storage" – which would have meant reformatting to FAT32. Not what I wanted, but pretty cool that it was an option and I didn't have to go digging.
Secondly, a quick googling turned up a third-party app that will mount exFAT volumes. It's called Paragon exFAT/NTSF (I don't have permission to post urls here yet). I had to pay $5 for exFAT support, and it wanted Total Commander (free) to browse and operate on the files.
Hello,
before I begin explaining my issue, I would like to apologie for my bad english.
I sometimes like to use my phone like notebook: connect mouse and keyboard to it. Z3 have OTG capability, so it(s fine. But one thing is not: ethernet adapters after updating to 6.0.1 using this doesn't seems to work.
First of all: i've thought, that you either have OTG or not. Not just for some devices. That it works like regular USB. It seems not. I have USB 3.0 powered hub conected to OTG cable and to the hub I've connected keyboard and mouse and tried to cennect already 5 different USB 3.0 gigabit ethernet adapters. They didn't work. On Android 5.1.1 worked my (all in one) USB OTG ethernet hub (3 USB 2.0, ethernet connector, micro USB wit OTG), but it was not powered, so I decided to upgrade.
Why? Simple. Power. I do this because for few day in near future I will be without my notebook (dedicated GPU is broken, i will have new one). I've been like this already for 3 days. And if i've been using my phone with keyboard and mouse (only use, which is comfortable for long time), I've noticed that is not possible to run this on battery. So my idea was to take as much as i can from the phone: controls and internet connection, and power that externally. And in addition buy the docking station and use the dock charging port. I've did all of this. And it works like magic: phone is powered from charger. All the time you might ask, why the hell I just don't use built in WiFi. Energy. That is the reason. WiFi just eat too much: if I pull up brightness of display and actually DO something on that phone, even wit plugged in docking charger, it just drain power faster, than charger charging (measured). For some reason the dock charging give about 0,45 A, not full 1,5 or something like that. Keyboard and mouse eats about 0,3 A, with some ethernet adapter it would be about 0,5 A. SO…a lot of power.
Android is based on Linux, so I have question (and I pretty much know the answer): is there ANY way how to install drivers for ethernet adapter on Z3? I obviously have root, I know about some terminal apps. But if I google this, it gives me only how to install drivers for phone on PC. That is not very helpful. I thing that this is most likelly impossible.
So I've searched something like list of supported devices. No suprise there: no relevant results. Sony Z3 AND Android 6.0.1 AND OTG device list, is probably too specific question.
Another idea what I had is try to use USB 2.0 adapters. You see, I wanted USB 3.0 (even though Z3 have only 2.0 (I still don't get it. Why the hell?)), because they have 1 Gb networks and I could use this adapter sometimes later for different device, like super thin notebook (if I ever would need some light device for travels). Another thing is the fact that 100 Mb is slow for large file transfer (movies and so on, so I have some entertainment, when I will not have my ntb). USB 2.0 can handle up to 480 Mb (in real life more like 300 Mb tops), which is still more than that network. But at this point I just gived up on this, and I will be happy if any ethernet adapter will work.
SO…do you know about any custom ROM, which would handle that? OTG USB ethernet support. Because not even that thing, which worked under 5.1.1 doesn't work under 6.0.1.
Sorry for long post, I needed to give you lot of informations, and why's.
Update
Update 0: OTG USB ethernet adapters doesn't work only on 6.0.1 or on this based ROM's. USB 3.0 doesn't work at all, but USB 2.0 works just fine on 5.1.1.
So…5.1.1 is most likelly the version, which I will be using. 6.0.1 has certain advantages, sure, but to me it seems like completely stupid to remove support for OTG USB ethernet adapters. More devices should be supported in nwer version, not less. And the inablity to remove bloatware even with root… No, this is just wrong. SO I buy my phone, but I have to have some apps, which I don't want and don't use? Ehm…no?
Update 1: I've decided doing it little bit differently. I've installed this ROM. I like how debloated it is, and many other things. USB ethernet adapter doesn't work (obviously), OS doesn't even know that something like ethernet exist. So I decided to try build my own drivers (by compiling source code) or app, or something. Any help is welcome.
Update 2: I currently have this thing. It's just USB 2.0 and 100 Mb/s, but…whatever. Tested on 5.1.1, transfers was 3× faster than on Wi-Fi and batery-enery-usage free (this is why I do this). Now, as stated before, I am on 6.0.1. That ethernet adapter has source code drivers available here. But here is the thing: they keep saing that
the support of this function must be included by the manufacturer directly in the particular Android device
Click to expand...
Click to collapse
(source) and the source code page saying that it is supported up to Android 5. So…what has changed in Android 6? Why the support is gone? And what will happend if I will try do something in Android studio?
Hello do you have z3 or z3+? I used to Havre z3 and with Lollipop ethernet became broke after 5.1.x I think so I had to reroll kitkat..I gave it away and now I am thinking to buy one z3+ but was fearing Ethernet won't work because it comes delivered with lollipop but now your post gives hope that it is still available. Other phones also have Ethernet capabilities but I found Sony best ... only the loudspeakers are not clear enough for me ... here you find a list with models that support Ethernet
http://plugable.com/products/usb2-otge100/
mrkapqa said:
Hello do you have z3 or z3+? I used to Havre z3 and with Lollipop ethernet became broke after 5.1.x I think so I had to reroll kitkat..I gave it away and now I am thinking to buy one z3+ but was fearing Ethernet won't work because it comes delivered with lollipop but now your post gives hope that it is still available. Other phones also have Ethernet capabilities but I found Sony best ... only the loudspeakers are not clear enough for me ... here you find a list with models that support Ethernet
http://plugable.com/products/usb2-otge100/
Click to expand...
Click to collapse
Hello, I have also tested ethernet adapter and it does not work with 6.01 on xperia z1, huawei p9 lite, lenovo yoga 3 tablet.
In xperia z1 with 5.1.1 it works correctly. Something has happened with 6.01 but anyway not all phones or tablets with 5.1.1 work because lenovo yoga 3 with 5.1.1 does not recognize the ethenet adapter.
I think the manufacturer is responsible for not working when it does not integrate the necessary drivers and does not support ethernet. It is the conclusion I came to verify that not all 5.1.1 recognize ethernet adapter and in 6.01 I read that some if you comment that the adapter works (especially in nexus and motorola).
What would be interesting is what comrade BiPentHexium says to be able to include in our room the ethernet support being root.
---------- Post added at 01:09 PM ---------- Previous post was at 01:01 PM ----------
On the list of models that support the ethernet adapter, it only refers to the Plugable brand adapter and is based on the reports of its customers. But in that list does not appear the xperia z1 and I can confirm that it works correctly with ethernet adapter (I do not have the plugable)
Anyone know of any good adaptors similar to the OTG which would allow to connect USB memory sticks via the USB-C port.
Shah1989 said:
similar to the OTG
Click to expand...
Click to collapse
Huh?G I'm using the Note 7 adapter. According to another site some OTG cables don't work with the Z so beware.
Found this on Google store. May go for it unless anyone's already tried with no luck. https://store.google.com/product/usb_type_c_to_usb_standard_a_adapter
fr4nk1yn said:
Huh?
Click to expand...
Click to collapse
Not sure if the actual term for it is OTG as that's what the adaptor was called for Microusb to USB A connection.
https://www.amazon.com/gp/aw/d/B01COOQIKU/ref=yo_ii_img?ie=UTF8&psc=1
This is the one recommended to me on another thread and I use it reguarly.
LeeMullinsII said:
https://www.amazon.com/gp/aw/d/B01COOQIKU/ref=yo_ii_img?ie=UTF8&psc=1
This is the one recommended to me on another thread and I use it reguarly.
Click to expand...
Click to collapse
Thanks but that's from the U.S. I'm in the uk
I havent used them but some companies are making flash drive with usb c and usb a if all you want it for is a flash drive you can get a flash drive that works without an adapter
Be careful of hard adapters, they (Ha Ha, YOU) will break themselves or your port
Edit, these may not be OTG also. Yet similar OTG 90* adapters have similar drawbacks/ benefits.
There are 2 like this on Amazon.
https://www.amazon.com/gp/product/B01N3SINB9/ref=ox_sc_sfl_title_2?ie=UTF8&psc=1&smid=A33YL1HODFD2CL
I am going to get this soon.
This right angle horizontal, is not yet reviewed, but a sister item with right angle (up) is.
Frys usually stocks this style in micro, maybe a C version is there?
I have used one! The one I use works only with USB flash drives that are fat32 format! The brand of mine is belkin and I bought it from best buy!
Very nice to use this for watching movies and not having to use up storage on the device.
Only drawback is that the usb-c port does not allow you to use wired headphones at the same time! So, I had to go wireless Bluetooth headset!
Kd
Sent from my XT1650 using Tapatalk
Curious question. Since this is one of the first phones where the add-on option comes into play (mods), couldnt one devise an external ssd drive moto mod? Either that or one of those all-in-one adapter mods where i can plug in older tech? Im always skeptical about destroying the one & only port on the phone anyway.
In case anyone only wants flash storage I purchased the Sandisk Dual ultra and it works great, usb c and a usb a connector.
Also only have to carry one thing as opposed to two. I bought mine with 128gb storage, preformatted to fat32, was simply plug and play.