Database Info

Samsung J2 Prime TWRP + ROOT

Rooting And TWRP for Samsung J2 Prime SM-G5325
By: Aldous M.C
https://forum.xda-developers.com/member.php?u=7506444
warning: not for noobs who dont know anything about odin/flashing/rooting
I found this in 4pda.ru forums i could not really understand even the page was translated from russian to english. though i figured out how they did this
The concept was to create a odin package with a patched boot.image of samsung a3 with twrp recovery.img inside odin package then flashing it thru odin and after that flashing back the stock boot.img of Samsung J2 Prime then booting directly to recovery to flash SuperSU to patch the Stock Boot.img to make TWRP stick and not be replaced by stock recovery or giving a SEAndroid enforing error when booting to TWRP
So this is how you do it. First you need A full official firmware of Samsung SM-G532G (J2 Prime) Odin, and a Tar-Tool to convert boot.img from firmware to a odin package
WHAT YOU NEED (download links below)
1. Download latest firmware for J2 prime
2. Open Firmware file open the AP file, inside you will see folders and the boot.img. extract the boot image by draging it out from the AP file
3. Download tar-tool and extract folder to deskop or anywhere then Place boot.img inside TAR-Tool
4. then run the ImgToTar.MD5.bat file and you will see a boot.tar.md5 file appear. (do not rename it to anything else odin will not recognize this as boot.img and will not flash)
5. Now you have a Odin flashable boot.img from your original firmware. place it somewhere you can easily access we will use it later.
FLASHING THE TWRP
1. on your phone go to developer options and enable usb debbuging and toggle oem unlock to ON
2. power of your phone
3. Open odin on pc and click AP then select/browse the A3 boot img+TWRP odin package select it.
4. then go to options tab uncheck the auto reboot and do not check anything else just the auto-reboot
5. Open your phone to ODIN mode Press and hold home key + Volume down then power
6.Plug in your phone to your pc and press volume up to continue download
7. in PC start the download in Odin if it says pass go to next step
8. at this point you cannot power off the device all you have to do is remove the battery and put it back in BUT DO NOT TURN IT ON YET!
9. Go to ODIN mode again on your phone and the flash the stock boot.img you created with the TAR-Tool (REMEMBER TO ALWAYS UNCHECK AUTO-REBOOT in Odin so you will not end up with a reboot after a succesful flash. again you cannot turn off the phone, just pull the battery and put it back in. Do not turn it on yet dont boot it else your TWRP recovery will be replaced by stock or put you in a boot loop
10. Now Go to Recovery mode, while phone is powered off Press and hold home key + volume up + power key.
11, Tadaa, you have your TWRP recovery booted, now you can flash SUPERSU (use flashable SuperSU 2.79 or latest)
[almost forgot before doing all this place the SuperSU flashable zip on both storages internal and sdcard]
12. now the stock boot.image is patched by SuperSU and it will now hold the TWRP even after reboot.
13. Your done turn your phone on and you have a rooted Samsung J2 Prime.
DOWNLOADS
https://yadi.sk/d/zsYDiUSk3FJHPX - A3+TWRP odin package
https://forum.xda-developers.com/showthread.php?t=2446269 - TAR-Tool
https://drive.google.com/uc?id=0B4fZWSYgVIIOR2kxSVBsYTdmWFE - SAMSUNG J2 Prime FIRMWARE (SM-G532G) you can also find other sources with updated firmwares for your region.
BIG thanks to:
Mk.Mourad for the Tar-Tool script
A Russian comrade JacobN of 4pda,ru forum for the A3+twrp odin package
i am not responsible for anything that happens to your phone while doing this. tested by me and will work if you follow carefully all procedures.
Aldous M.C

twrp keep read only ....
thanks it's worked
but my phone stuck on bootloop samsung logo......it won't start up .......
e : failed to mount / efs (invalid argument )
e : failed to mount / efs (invalid argument )
e : failed to mount / efs (invalid argument )
dm-variety failed...........
how to fix it ...
please help me
thanks

thanks for this. my phone's AP is G532GDXU1AQC1 will this work?. BL is G532GDXU1AQC1 and CP is G532GDXU1AQA3. thank yo:good:u!. i've been waiting for someone speaking in english to make a root for j2 prime. it seems that the forum in 4pda only supports g532f variant of j2 prime.

room4two said:
thanks for this. my phone's AP is G532GDXU1AQC1 will this work?. BL is G532GDXU1AQC1 and CP is G532GDXU1AQA3. thank yo:good:u!. i've been waiting for someone speaking in english to make a root for j2 prime. it seems that the forum in 4pda only supports g532f variant of j2 prime.
Click to expand...
Click to collapse
i am already rooted. thanks for this method!. no problems at all

Can I use this with Baseband version AQA3 and Build number AQC1 ?

does this work on dual sim version? SM-G532G/DS?
and if by chance, you could post pictures
thanks!

chalermla said:
Can I use this with Baseband version AQA3 and Build number AQC1 ?
Click to expand...
Click to collapse
ive tried this and it worked for aqa3 aqc1

room4two said:
ive tried this and it worked for aqa3 aqc1
Click to expand...
Click to collapse
Is your phone also the dual-sim version? Thanks anyway, :good::good:

thanks bro, this method is done, sorry my english
Phone: samsung j2 prime (SM-G532M)
Pais: Bolivia
Empresa: VIVA
Compilacion: MMB29T.G532MUMU1AQD2
Para los de habla hispana remarco lo importante en el procedimiento desmarcar en odin el reseteo automatico y no tocar nada mas
para salir del menu download quiten la bateria y la colocan de nuevo, por nada del mundo prendan el telefono hasta realizar todo el procedimiento
resumen:
1.- entrar al menu download y flashear con odin el A3_boot_twrp_recovery.tar.md5. Quitar bateria y volver a colocarla
2.- entrar al menu donwload y flashear con odin boot.tar.md5 creado por ustedes en base del original. Quitar bateria y volver a colocarla
3.- entrar al menu de twrp con vol+,menu,power e instalar super su (SuperSU-v2.82-201705271822.zip)
4.- encender normalmente y vuala root 100%

Thanks
OHHHHH WAOOOOW.....
THANKS a Lot Man....You Are Great.....
Finally, I have found for which i was searching since i bought my j2 prime....
Finally,i have Rooted the latest firmware of my Grand Prime+/j2 prime g532f available on Samsung website...Now I have TWRP and Have installed Xposed....Now I Can Download Direct Files Into SD Card From Uc Browser and have full access to sd card....
I Can Instal Large Games In SD Card.....
Wow I am very Happy and Satisfied with my Mobile now....

help me
hey help me plz, give me ur official boot.img and recovery.img my galaxy j2 prime is bootloop

ajireza said:
hey help me plz, give me ur official boot.img and recovery.img my galaxy j2 prime is bootloop
Click to expand...
Click to collapse
Flash a stock firmware...it will be okay...

Procedure continues to apply Magisk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Following the procedure given in the first post, Magisk can also be installed. I'll continue with a new step 10:
10) If you followed the original thread and installed SuperSU, you'll need to uninstall it in order to proceed. Unroot your phone using this unSU script. If you haven't yet, ignore this.
11) To install latest Magisk, DOWNLOAD the following:
Latest Magisk
Latest Magisk Manager
(Verify you're downloading the latest versions in this thread here.)
Place these downloads in your SD Card and also extract the stock boot.img from your firmware AP file, as described before. We'll need it.
12) Now press and hold Vol Up + Home + Power will boot usa into TWRP. Now we need to first install the stock boot.img. This is done because Magisk installer will complain if it detects this patched boot.img we used in earlier steps to boot TWRP and thus fail. Installing the stock boot.img will let us install Magisk successfully. SO in TWRP, go to Install / Install Image and browse to the boot.img file; then select "Select Partition to Flash Image: Boot" and flash it.
13) Go back to TWRP home and proceed to install Magisk Zip file. The installer should end without any errors.
14) Reboot your Samsung to system, and you can now install Magisk Manager (allow unknown sources, you know this already). Once done, open it. You'll be greeted with beautifil green ticks :good:
TWRP will still be there when you need it.
ENJOY!!!!
Thanks to a lot to @4ld0u5 for the original thread.

Hello, I'm helping a friend root his/her SM-G532G/DS
Is this method will work for the stock rom mentioned below (link) or is this stock rom legit for SM-G532G/ds ?
thank you very much.
http://updato.com/firmware-archive-select-model?record=10D3009C4CAA11E7963AFA163EE8F90B

metafaniel said:
Following the procedure given in the first post, Magisk can also be installed. I'll continue with a new step 10:
10) If you followed the original thread and installed SuperSU, you'll need to uninstall it in order to proceed. Unroot your phone using this unSU script. If you haven't yet, ignore this.
11) To install latest Magisk, DOWNLOAD the following:
Latest Magisk
Latest Magisk Manager
(Verify you're downloading the latest versions in this thread here.)
Place these downloads in your SD Card and also extract the stock boot.img from your firmware AP file, as described before. We'll need it.
12) Now press and hold Vol Up + Home + Power will boot usa into TWRP. Now we need to first install the stock boot.img. This is done because Magisk installer will complain if it detects this patched boot.img we used in earlier steps to boot TWRP and thus fail. Installing the stock boot.img will let us install Magisk successfully. SO in TWRP, go to Install / Install Image and browse to the boot.img file; then select "Select Partition to Flash Image: Boot" and flash it.
13) Go back to TWRP home and proceed to install Magisk Zip file. The installer should end without any errors.
14) Reboot your Samsung to system, and you can now install Magisk Manager (allow unknown sources, you know this already). Once done, open it. You'll be greeted with beautifil green ticks :good:
TWRP will still be there when you need it.
ENJOY!!!!
Thanks to a lot to @4ld0u5 for the original thread.
Click to expand...
Click to collapse
Thanks

Can you upload stock boot.img for j2 prime g532f ....i am waiting...i have no computer.... ??

I'm sorry. I couldn't understand this part..
2. Open Firmware file open the AP file, inside you will see folders and the boot.img. extract the boot image by draging it out from the AP file
Please assist. TQ..

i already followed step by step . but after i reboot i need to enter password that i don't know i had. please help me asap

i have the problem with my twrp . are u already solve the problem u faced?
pheak28 said:
thanks it's worked
but my phone stuck on bootloop samsung logo......it won't start up .......
e : failed to mount / efs (invalid argument )
e : failed to mount / efs (invalid argument )
e : failed to mount / efs (invalid argument )
dm-variety failed...........
how to fix it ...
please help me
thanks
Click to expand...
Click to collapse
I have the same problem with my twrp too sir . just like yours. can anyone help me?

Hello brother. Im already rooted with SuperSU. I want to try Magiisk. Is it okay if I flash my J2 Prime with the stock rom and then root it directly using Magisk?

[STOCK] [OFFICIAL EU UNTOUCHED] [MULTI] LeEco Le2 X527 5.9.21s

Hello
i make dump and convert it to recovery rom
it can be flashed by TWRP
this is last official EU version of Le2 x52x rom
this rom have complete translation (without english or chinese untranslated parts) of all EU languages
best way how to flash it if you havent got twrp
0. download rom https://webshare.cz/file/363v61oM3d/x527-5-9-21s-rar
1. extract downloaded package
2. go to bootloader by pressing and hold volume down and power button
3. open command promt and run:
3.1 fastboot oem unlock-go
3.2 fastboot boot twrp.img
4. now you are rebooted to twrp
5. copy rom (X527-5_9_21S.zip) to the phone
6. flash rom
7. wipe data factory reset
8. reboot phone
9. you are in official EU rom with stock recovery

veisen said:
Hello
i make dump and convert it to recovery rom
it can be flashed by TWRP
this is last official EU version of Le2 x52x rom
this rom have complete translation (without english or chinese untranslated parts) of all EU languages
best way how to flash it if you havent got twrp
0. download rom https://webshare.cz/file/363v61oM3d/x527-5-9-21s-rar
1. extract downloaded package
2. go to bootloader by pressing and hold volume down and power button
3. open command promt and run:
3.1 fastboot oem unlock-go
3.2 fastboot boot twrp.img
4. now you are rebooted to twrp
5. copy rom (X527-5_9_21S.zip) to the phone
6. flash rom
7. wipe data factory reset
8. reboot phone
9. you are in official EU rom with stock recovery
Click to expand...
Click to collapse
Can you make the same with the x522? I want to get stock again

nabelar82 said:
Can you make the same with the x522? I want to get stock again
Click to expand...
Click to collapse
yes you can

Thanks! Thats exactly what im looking for! Pefect stock ROM! Easy to install with twrp, working perfect in my x520.

veisen said:
yes you can
Click to expand...
Click to collapse
I mean if you can I don't have the stock backup I deleted by mistake

nabelar82 said:
I mean if you can I don't have the stock backup I deleted by mistake
Click to expand...
Click to collapse
you can flash this rom it is compatible

veisen said:
you can flash this rom it is compatible
Click to expand...
Click to collapse
The ROM is really good but i Tried everything to pass through safetynet but i cant do it.

Can I install regularly via stock update, w/o twrp? What's is date of security patch? Can you put homescreen there?
I'm on 5.9.021s for x526. I have x527.

google Drive
Can you upload it on google Drive and share the link please , cause google drive is faster and easier way to download
Owing all gratitude towards you

svsavic said:
Can I install regularly via stock update, w/o twrp? What's is date of security patch? Can you put homescreen there?
I'm on 5.9.021s for x526. I have x527.
Click to expand...
Click to collapse
You can not update it via stock recovery bcs leeco never release this rom it is installed on europe (Czech branded phones) i cannot post screen bcs im change phone i have Essential ph-1 for now

Can i flash it as a secondary rom (multirom)?

Does anyone have the stock modem for x527? because my signal keeps coming on and off constantly in every eui rom so I can't go back to stock, strangely I can use it on Nougat and Oreo. I've flashed this stock rom but no solution.

Hi @veisen !
Thanks for the ROM.
However - how can it be an official ROM if it shows a 'Le X527' but with a 'Snapdragon 820' (when it should be a Snapdragon 652)?
Cheers, raimerik

raimerik said:
Hi @veisen !
Thanks for the ROM.
However - how can it be an official ROM if it shows a 'Le X527' but with a 'Snapdragon 820' (when it should be a Snapdragon 652)?
Cheers, raimerik
Click to expand...
Click to collapse
Thats a bug with official rom itself. This rom is official, so chill

veisen said:
5. copy rom (X527-5_9_21S.zip) to the phone
Click to expand...
Click to collapse
can't copy X527-5_9_21S.zip (2,1GB) to /sdcard. Copy always stops after copying 140MB or so. I copy mounting USB storage from TWRP, and then through the file administrator with copy-paste (Ubuntu 16.04, linux). Filesystem is ok. I've done a factory reset before. What can I do?

xe7um said:
can't copy X527-5_9_21S.zip (2,1GB) to /sdcard. Copy always stops after copying 140MB or so. I copy mounting USB storage from TWRP, and then through the file administrator with copy-paste (Ubuntu 16.04, linux). Filesystem is ok. I've done a factory reset before. What can I do?
Click to expand...
Click to collapse
Try pushing it through adb
Rename the file to update.zip
Open terminal
cd "directory of the zip folder"
adb push update.zip /sdcard/
Wait for few minutes, it should be done.

bonsai.14 said:
Try pushing it through adb
Rename the file to update.zip
Open terminal
cd "directory of the zip folder"
adb push update.zip /sdcard/
Wait for few minutes, it should be done.
Click to expand...
Click to collapse
I've tried it already:
Code:
[email protected]:~/LeeecoLe2X527$ adb push -p X527-5_9_21S.zip /sdcard/Varis
Transferring: 15335424/2096207546 (0%)
Hanged up

xe7um said:
can't copy X527-5_9_21S.zip (2,1GB) to /sdcard. Copy always stops after copying 140MB or so. I copy mounting USB storage from TWRP, and then through the file administrator with copy-paste (Ubuntu 16.04, linux). Filesystem is ok. I've done a factory reset before. What can I do?
Click to expand...
Click to collapse
You can Sideload it enable sideload on twrp and use command
adb sideload "/your_dir/your_file.zip"

veisen said:
You can Sideload it enable sideload on twrp and use command
adb sideload "/your_dir/your_file.zip"
Click to expand...
Click to collapse
Ok, @veisen I'll try it. But do you have any reasonable explanation of why adb push stops copying?

Any one using this rom? How's battery life n camera ?
If possible post some screenshots

[how to] install pixel experience (all working) [pie] [9.0] gsi

Hello guys, in this thread i will make guide about how to install Pixel Experience (or another GSI with TWRP, and all works on GSI) in Mi A2 Lite
What you NEEDED?
Twrp >>>>>https://mega.nz/#!WEhEXKpY!RdyqEgYyj80K9PAvIS6yXA1Hh8GiLSSde2i219DxRy0 (thanks to @Seryioo)
TWRP FIX>>>> https://androidfilehost.com/?fid=11410963190603893418 (thanks to @mac12m99)
GSI IMG>>>> https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
ABOOT 9.6.4>>> https://androidfilehost.com/?fid=11410963190603884024 (thanks to @mac12m99)
(P)ROM: http://bigota.d.miui.com/V10.0.3.0....0.PDLMIXM_20190114.0000.00_9.0_e8d8d4a6d0.tgz
(O)ROM: http://bigota.d.miui.com/V9.6.4.0.O...0.ODLMIFF_20180724.0000.00_8.1_4afd3431a2.tgz
Vendor from OREO ROM- Extract on Downloaded (O rom) (9.6.4 is better)
Modem from OREO ROM- Extract on Downloaded (O rom) (9.6.4 is better)
Custom kernel>>> https://androidfilehost.com/?fid=1395089523397900247 (Thanks to @AhmedHady)
Fix Sim Card Swipe>>>>https://forum.xda-developers.com/attachment.php?attachmentid=4704476&stc=1&d=1550012435 (thanks to @eremitein)
1- Extract PIE stock and OREO stock in any folder
2- Copy vendor and Modem.img from Oreo Stock to Pie Stock
3- Copy GSI image to folder Pie Stock and rename to system.img and replace it
4- Copy twrp img and twrp installer and Kernel zip and aboot_9.6.4.img, and modemfix zip to adb and fastboot Folder. If you no have adb, download in here: https://androidfilehost.com/?fid=962187416754459552
5- Go to Pie Rom folder and execute flash_all.bat (your phone in fastboot mode)
6- after finish, reboot to fastboot again and open adb and fastboot e paste this command: fastboot boot twrp-3.2.3-0-daisy_zero.img
7- hit cancel encryption in twrp, and enable adb sideload in advanced menu
8- paste this command: adb sideload CAF-Kernel-daisy-20190223-2158.zip
9- enable adb sideload again and paste this command: adb sideload fixed-twrp-installer-daisy.zip
10- enable adb sideload again and paste this command: adb sideload modemfix_daisy__zero.zip
10- NOT REBOOT SYSTEM, tap reboot and Bootloader in twrp
11- paste this command: fastboot flash aboot aboot_9.6.4.img
12- reboot to twrp and go to wipe>>advanced>> format data and type yes. After, resize partition of system and data.
13- That's All
ScreenShots
https://imgur.com/a/b2msFTV

Basic English leangue tell me pls.
Don't have a full package? I want to handle it in one and simpler way.
I want to use pixel experiance (android pie)

factor19300 said:
Basic English leangue tell me pls.
Don't have a full package? I want to handle it in one and simpler way.
I want to use pixel experiance (android pie)
Click to expand...
Click to collapse
There is no one click installment for this phone if you wanna use a custom rom. If you want it simple in basic English language just flash the latest stock rom with miflash.
Sent from my Phh-Treble vanilla using Tapatalk

Are there regular updates to the rom (like security updates)? If yes, is it just an easy to update OTA or do you have to go through all these steps again?

downloadonlyaccount said:
Are there regular updates to the rom (like security updates)? If yes, is it just an easy to update OTA or do you have to go through all these steps again?
Click to expand...
Click to collapse
maybe it's easy, because is the same rom. Idk

Vitor00 said:
maybe it's easy, because is the same rom. Idk
Click to expand...
Click to collapse
lmao, no offense, but if you don't know it, why do you reply then ?

downloadonlyaccount said:
lmao, no offense, but if you don't know it, why do you reply then ?
Click to expand...
Click to collapse
no offense either, but questions were asked to be answered, and the "do not know" is an answer to the question too

downloadonlyaccount said:
Are there regular updates to the rom (like security updates)? If yes, is it just an easy to update OTA or do you have to go through all these steps again?
Click to expand...
Click to collapse
ota not supported in gsi
for update you need only do this "fastboot flash system system.img"

downloadonlyaccount said:
Are there regular updates to the rom (like security updates)? If yes, is it just an easy to update OTA or do you have to go through all these steps again?
Click to expand...
Click to collapse
GSIs don't get updated often but when they do you can just flash it over your system. :good:

Cara tudo bem?
Pode me dizer a diferença dessa rom para o pie atual?
(desculpa a pergunta besta)

I did everything the same as the guide and it did not work. does not start the system

Vitor00 said:
Hello guys, in this thread i will make guide about how to install Pixel Experience (or another GSI with TWRP, and all works on GSI) in Mi A2 Lite
...
4- Copy twrp img and twrp installer and Kernel zip and aboot_9.6.4.img, and modemfix zip to adb and fastboot Folder. If you no have adb, download in here: https://androidfilehost.com/?fid=962187416754459552
10- enable adb sideload again and paste this command: adb sideload modemfix_daisy__zero.zip
ScreenShots
https://imgur.com/a/b2msFTV
Click to expand...
Click to collapse
I think you forgot to mention the URL for modemfix_daisy__zero.zip file on your "What you NEEDED?" list.

BJumperBR said:
I think you forgot to mention the URL for modemfix_daisy__zero.zip file on your "What you NEEDED?" list.
Click to expand...
Click to collapse
this is it
Fix Sim Card Swipe>>>>https://forum.xda-developers.com/att...1&d=1550012435 (thanks to @eremitein)

[Help] Kali Nethunter installation on One Plus 6

I am new to linux (as expected) and tried installing Kali NetHunter on my android device [One Plus 6]. I was successful in installing with Android 8 but my phone keeps bricking when attempted with Android 9/10. I referred to these instructions and followed these steps:
I am looking for help and also any explanations for my understanding of the process is also appreciated very much!
1) Start developer mode, enable oem unlocking and usb debugging, and restart in fastboot mode > then from Powershell: fastboot oem unlock
Phone gets wiped so again start developer mode, usb debugging.
2) Now I download the twrp .img and zip files, also the Magisk.apk from github then rename the apk to .zip (as instructed in their documentation). Finally move these files to the internal storage of the phone.
3) Restart phone in Fastboot mode > from Powershell: fastboot boot twrp-3.x.x-x-enchilada.img (version according to android 8 or 10 respectively)
4) Now that I am temporary booted into twrp I install the twrp .zip file from here and reboot into recovery mode (TWRP that was installed).
Now I flash install the Magisk.zip and reboot the OS > Install the magisk.apk that shows up.
Following the kali nethunter documentation linked above no extra steps are needed for android 8. So I just install the Nethunter zip from Magisk app (click the modules [puzzle piece] icon and select nethunter zip). This works perfectly!!! Ps: if i flash nethunter from TWRP it says successful but bricks the phone and doesn't reboot. Don't know why but if you do please let me know or hint what i should look into to understand better.
****[NEED HELP HERE]****
FOR ANDROID 10: The Kali documentation says for disabling encryption we need to first flash Universal DM-Verity, ForceEncrypt Disabler. So I download the zip and move it to internal storage, from what I understand for my requirement I do not need to change anything in file naming. If I flash this zip using Magisk or TWRP the result is just a bricked phone that gets stuck on "The bootloader is unlocked" warning message.
If I skip this step then it bricks if I flash nethunter through TWRP and if I flash as a module using Magisk then it works fine.
According to nethunter documentation without the Universal DM-Verity, SSH capabilites should not work but on my phone it works just fine if I open the NetHunter app > Kali services > SSH (don't know an extensive way to test this or if any other functionality has been compromised without the ForceEncrypt Disabler). Am I understanding this part wrong? or in my case I do not need to flash Universal DM-Verity, ForceEncrypt Disabler? This step is what confuses me and I have tried countless times via different ways over the past summer.
The Kernel is shows is 4.9.179-perf+ with Android 10.
The reason i wanted to update to Android 10 from 8 is because I am having compatibility issues with RTL8814AU and none of the drivers I find seem to work (Android 8 kernel is 4.9.65-perf+).
Thank you for your time to read and respond!

Friend when you install magisk and disable verity and turn on your phone install the magisk app and checker root then give the necessary permissions and start the recovery mode in twrp and then install install the nethunter ZIP again what happens to me it worked like this
Amigo cuando instales magisk y disable verity y encienda tu teléfono instala la app de magisk y checker root luego da los permisos necesarios e inicia el modo recovery en twrp y luego instala instala el ZIP de nethunter de nuevo haber que pasa a mi me funcionó así

How to install LineageOs 19 on A51?

Hi there,
I tried following this guide: [HOWTO]/[ROM] [UNOFFCIAL] How to Flash Lineage OS 19.0
However the LineageOs link is broken, so I tried searching by the name and came here: Andy Yan's personal builds // GSI Files
But I'm not sure if this would work or that I would need a special patched version or something.
Would I also need to install Android 12 beforehand?
Thanks in advance!
P.S. If someone can help me out, then I would be happy to write an updated guide!
​

Just flashed this 5mins ago. My rom was latest samsung. One UI40
A12. Works fine

Works perfectly fine for me too, only problem is that magisk complains about a wrong su version and i can't get rid of it.

Oh, and somehow, google drive won't pick my google account, can't use it somehow, everything else works.

OK..solved those 2 problems. I installed the latest google drive apk from apkmirror. I don't know if it's just a bad version on play store or if the device is identified as whatever and get's the wrong version.
To get rid of the stupid su that doesn't come from magisk, you can adb shell to device, su, and then execute /sytem/bin/phh-securize.sh. It will throw some errors, but remove the stuff and magisk doesn't complain anymore and still works flawlessly.

nEUTRon666 said:
OK..solved those 2 problems. I installed the latest google drive apk from apkmirror. I don't know if it's just a bad version on play store or if the device is identified as whatever and get's the wrong version.
To get rid of the stupid su that doesn't come from magisk, you can adb shell to device, su, and then execute /sytem/bin/phh-securize.sh. It will throw some errors, but remove the stuff and magisk doesn't complain anymore and still works flawlessly.
Click to expand...
Click to collapse
Thanks for the info, finally got magisk to work properly after running phh-securitize!

Hi it's my first time in a forum, sorry for my bad English, but I want to root my A51 with magisk and flash the lineage OS 19 ROM and install twrp on my phone, but I don't know exactly how to do, and which file of lineage OS I have to choose here are they all working for a51 android 12 ??

Hello,
my problem is: I can not install the TWRP-11-3.6.2-a51-20220602-0515.img. The SM-A515F will not boot in to the latest TWRP. Only the version twrp-a51-3.5.0_10-1_ianmacd.tar will be installed an I can enter in to it.
Then I select the image of the Lineagos 19 for this phone to install, and I got this error messages:
Error opening: /data/bootchart (Permission denied), /data/misc (Permission denied) etc ...
@shanman-2
In your signature, you have an SM-A515F with LineageOS 19 and TWRP-11... installed
What has you done, for this installation?
Thanks for your help.

Greenatic said:
Salve è la mia prima volta in un forum, scusate il mio pessimo inglese, ma voglio fare il root del mio A51 con magisk e flashare la ROM di lineage OS 19 e installare twrp sul mio telefono, ma non so esattamente come fare, e quale file del sistema operativo di lignaggio devo scegliere qui funzionano tutti per a51 Android 12?
Click to expand...
Click to collapse
You have to download this (lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bgS-vndklite.img), if you are going to use this guide in the top of this Page (https://forum.xda-developers.com/t/howto-rom-unoffcial-how-to-flash-lineage-os-19-0.4423111/) you wil understand all of it

tiptel170 said:
Hello,
my problem is: I can not install the TWRP-11-3.6.2-a51-20220602-0515.img. The SM-A515F will not boot in to the latest TWRP. Only the version twrp-a51-3.5.0_10-1_ianmacd.tar will be installed an I can enter in to it.
Then I select the image of the Lineagos 19 for this phone to install, and I got this error messages:
Error opening: /data/bootchart (Permission denied), /data/misc (Permission denied) etc ...
@shanman-2
In your signature, you have an SM-A515F with LineageOS 19 and TWRP-11... installed
What has you done, for this installation?
Thanks for your help.
Click to expand...
Click to collapse
So here is the latest update:
Code:
1. Download here this ROM:
https://samfw.com/firmware/SM-A515F/DTM/A515FXXS5FVI2
2. Unpack the zip-files
for ZIP in $(ls *.zip); do yes | unzip $ZIP; done
3. Rename from m5 to tar
for MD5 in $(ls *.md5 |sed -e "s/.md5//"); do mv $MD5.md5 $MD5; done
4. Unpack the tar files
for TAR in $(ls *.tar); do tar -xvf $TAR; done
5. Unpack the lz4 files
LZ4 in $(ls *.lz4); do yes | lz4 $LZ4; done
6. Flashing the img files to the phone
heimdall flash --SUPER super.img --BOOT boot.img --CACHE cache.img --DTBO dtbo.img --METADATA metadata.img --OMR omr.img --PRISM prism.img --RECOVERY recovery.img --USERDATA userdata.img --VBMETA vbmeta.img --VBMETA_SAMSUNG vbmeta_samsung.img
7. Flashing the bin files to the phone
heimdall flash --CM cm.bin --KEYSTORAGE keystorage.bin --RADIO modem.bin --CP_DEBUG modem_debug.bin --BOOTLOADER sboot.bin --UH uh.bin --UP_PARAM up_param.bin
8. Unlock the bootloader in the download mode ( keep pressing together Vol+ and Vol- and conecting to the USB-port of the computer ). And then keep Vol+ for 2 sec. for unlocking.
9. Boot the phone
10. Connect the phone with the USB-cable to the computer
11. Preparing the phone for the devoling mode, and accept all the avsings in the phone.
12. Computer: adb shell
13. a51:/ $ reboot download
14. Use this: TWRP-11-3.6.2-a51-20220602-0515, this will working with the new stockrom
The I made this steps:
Code:
3.3 Flashing Sequence:
In TWRP Follow this sequence:
3.3.1. Wipe data, dalvik, cache
3.3.2. flash disable_dm_verity
3.3.3. flash multidisabler
3.3.4. Wipe internal storage (Backup might be advisable, if you didn't format data anyways)
3.3.5. reboot recovery
3.3.6. flash chondone with lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bgS-vndklite.img in the same folder renamed to system.mg
3.3.7. Wipe data
3.3.8. Reboot
This is from: DerTopher
Source:
[link] https://forum.xda-developers.com/t/howto-rom-unoffcial-how-to-flash-lineage-os-19-0.4423111/ [/link]
Than I will boot the LOS 19.1, but there is no booting up, only start - restart - start etc....
Only I can enter in to the TWRP.
Is there an solution? I made an "heimdall print-pit" but this not work.
Thank you for the support...

How to change quantity of slots in home to 3 slots ?

Update 01/29/2023:
Whit this version of the android it will function well.
You have to download this version: lineage-20.0-20230115-UNOFFICIAL-arm64_bvS-vndklite.img.xz
This step is verry importand!
Code:
3.3.6. flash chondone with lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bgS-vndklite.img in the same folder renamed to system.mg
The correct form:
Code:
3.3.6.1 rename lineage-20.0-20230115-UNOFFICIAL-arm64_bvS-vndklite.img in to system.img and keep it in the same folder likes the chondone zip-file!
3.3.6.2 Then flash the chondone zip-file, and don't worry about the error massege "can not find the /oem ..."
Thanks for the help and the support for me Hy gays - this an grate jop - keep doing.
The Samsung Android Version 12 is on this phone slow, and has a lot of bolt apps inside.