Database Info

[FLASH][ROOT]Android 4.3 Stock[Nexus 7 grouper/nakasi]

How to Flash Android 4.3 on your Nexus 7 nakasi/grouper (wifi only)
Code:
/*
* I am not responsible for bricked devices
* or something else you do with this toturial
*
* Every 60 Seconds In Africa A Minute Passes.
* Even for that I'm not responsible!!
*/
Needed:
Android SDK
Factory Image from Google
ChainFire SuperSU
ChainFire SuperSU [Uploaded.net Mirror]
TWRP Recovery
TWRP Touch Recovery v2.2.1 [Uploaded.net Mirror]
or
CWM Recovery
CWM Touch Recovery v6.0.3.1 [Uploaded.net Mirror]
Attention: Bootloader MUST be unlocked.
Step by Step Instructions flashing Rom without loosing Data:
Download the Stuff up there.
Unzip the Factory Image "nakasi-jwr66v-....tgz". In there you will find another Archive named like this "image-nakasi-jwr66v.zip". Unzip it.
Open file explorer on computer and change to the "Android SDK" directory and change to platform-tools folder
Press [SHIFT] + Right Click and click "Open Command Window Here", then Commandline should appear
Be sure all your data is backed up. If you don't have done already, do it NOW!!
Switch to the device and shut it down.
Press [POWER]+[VOL-] button to start into bootloader
Now switch to the PC again and in the command line type:
Code:
fastboot flash bootloader <path_to_bootloader-grouper-4.2.3>
But instead the <...> type the path to the bootloader!!
After that you can run following command
Code:
fastboot reboot-bootloader
Your device will reboot now with new bootloader.
After it write following commands
Code:
fastboot flash system <path_to_system.img>
fastboot flash boot <path_to_boot.img>
fastboot flash userdata <path_to_userdata.img>
Now you have flashed your Devices System, Kernel and Userdata partition.
Then
Code:
fastboot reboot
for rebooting your device into System (this could take a couple of minutes)
Step by Step Instructions Rooting Android 4.3:
Copy the ChainFire SuperSU (.zip) to the root of your sdcard
Shutdown device and boot into bootloader again. ([Power]+[Vol-] Buttons)
In Command Line now Type following command
Code:
fastboot flash recovery <path_to_TWRP.img_or_CWM.img
for flashing the Recovery.
After flashing the Recovery navigate to the "Start Recovery" Section with the Vol Up/Down keys.
Now the Recovery sould start.
For CWM Recovery do following steps:
Switch to the "Flash ZIP from sdcard" item and press power button one time in case you have the CWM Recovery without touch.
After that switch to "Select zip from sdcard" and press power button again.
Now select the ChainFire SuperSU zip file in the root of your sdcard, which you copied in step one.
The Recovery will now flash the .zip file. After flashing has finished, reboot into system.
For TWRP Recovery do following steps:
Tap the "Install" Button in the Recovery
After that you have to select the ChainFire SuperSU zip file in the root of your sdcard, which you copied in step one.
After that swipe to flash the zip file
The zip will be flashed and after that you can reboot into system again
Now you are done.
Have Fun

yeahhhh

Code:
fastboot flash data <path_to_userdata.img>
should be
Code:
fastboot flash userdata <path_to_userdata.img>

any idea how this comes?
Code:
F:\adt-bundle-windows-x86_64-20130717\adt-bundle-windows-x86_64-20130717\sdk\pla
tform-tools>fastboot flash bootloader F:\nakasi-jwr66v-factory-d341d356\nakasi-j
wr66v\bootloader-grouper-4.23
error: cannot load 'F:\nakasi-jwr66v-factory-d341d356\nakasi-jwr66v\bootloader-g
rouper-4.23': [B]No error[/B]
F:\adt-bundle-windows-x86_64-20130717\adt-bundle-windows-x86_64-20130717\sdk\pla
tform-tools>c

decat said:
any idea how this comes?
Code:
F:\adt-bundle-windows-x86_64-20130717\adt-bundle-windows-x86_64-20130717\sdk\pla
tform-tools>fastboot flash bootloader F:\nakasi-jwr66v-factory-d341d356\nakasi-j
wr66v\bootloader-grouper-4.23
error: cannot load 'F:\nakasi-jwr66v-factory-d341d356\nakasi-jwr66v\bootloader-g
rouper-4.23': [B]No error[/B]
F:\adt-bundle-windows-x86_64-20130717\adt-bundle-windows-x86_64-20130717\sdk\pla
tform-tools>c
Click to expand...
Click to collapse
The file extension is missing!!
Sent from my Nexus 7 using xda app-developers app

These instructions worked perfectly for me! Thanks for putting this guide together!

I've been trying for a while to get 4.3 installed and this finally worked.

trestevenson said:
These instructions worked perfectly for me! Thanks for putting this guide together!
Click to expand...
Click to collapse
So using these directions will preserve data? I thought when you flash userdata you are wiping your data partition?

Followed your instructions to the letter and everything worked great, however, my device is only showing I have 6GB of total space on a 32GB model! I've never run into this problem before with all the roms and restores that I've done. Any suggestions?

docangle said:
So using these directions will preserve data? I thought when you flash userdata you are wiping your data partition?
Click to expand...
Click to collapse
I just noticed the same. I'm going to see if rooting and doing a complete wipe helps.

my 16GB nexus 7 shows only 6 GB storage when I connect it to PC

cerisk said:
my 16GB nexus 7 shows only 6 GB storage when I connect it to PC
Click to expand...
Click to collapse
same here

docangle said:
same here
Click to expand...
Click to collapse
cerisk said:
my 16GB nexus 7 shows only 6 GB storage when I connect it to PC
Click to expand...
Click to collapse
I plugged mine in and it showed up as 4 gb left. I went through and deleted the old back ups that I had and I was back up to 10 or so free, or something like that.

I finally got my drive space back by running these commands before I flashed:
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
Now the only problem that I am having is that I am getting a supersu error: "there is no su binary installed, and supersu cannot install it." But I still have cwm recovery.

Reformatting through recovery fixed the showing only 6/27.5GB available.

I have the same "supersu error" problem as well.
Even after I wiped everything and flash a stock-rooted ROM (in another thread), this problem happens again ...
--edited--
Thanks @scoopman,
The "supersu error" problem is solved after I re-flash the whole ROM and answer "NO" on exiting CWM (NOT "YES")
calbrs said:
I finally got my drive space back by running these commands before I flashed:
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
Now the only problem that I am having is that I am getting a supersu error: "there is no su binary installed, and supersu cannot install it." But I still have cwm recovery.
Click to expand...
Click to collapse

icephreaq said:
Followed your instructions to the letter and everything worked great, however, my device is only showing I have 6GB of total space on a 32GB model! I've never run into this problem before with all the roms and restores that I've done. Any suggestions?
Click to expand...
Click to collapse
cerisk said:
my 16GB nexus 7 shows only 6 GB storage when I connect it to PC
Click to expand...
Click to collapse
docangle said:
same here
Click to expand...
Click to collapse
poda13 said:
I plugged mine in and it showed up as 4 gb left. I went through and deleted the old back ups that I had and I was back up to 10 or so free, or something like that.
Click to expand...
Click to collapse
Here Is The Answer!
I if you are paying attention during the flash you will notice the extra Partitioning.
http://forum.xda-developers.com/showthread.php?t=1781250

kevin0164 said:
I have the same "supersu error" problem as well.
Even after I wiped everything and flash a stock-rooted ROM (in another thread), this problem happens again ...
Click to expand...
Click to collapse
Okay I found this, don't know why this one works and the other doesn't. But try the link on this page https://plus.google.com/app/basic/st...l1aoor5ezninhc
I flashed a complete wipe which took out the root from the original 4.2.2 version. Installing the above link worked perfectly to get me root back on the 4.3 version.
All credit goes to danvee posting the link in section http://forum.xda-developers.com/showthread.php?p=43913405

3oudreaux said:
Here Is The Answer!
I if you are paying attention during the flash you will notice the extra Partitioning.
http://forum.xda-developers.com/showthread.php?t=1781250
Click to expand...
Click to collapse
I still got this problem after following the step:crying:

tommykwan222 said:
I still got this problem after following the step:crying:
Click to expand...
Click to collapse
same here. cwm says it can't open the zip file ???

[ROOT] Moto X Style - XT1572 BR - Marshmallow

Hello guys!
I make my own ROOT (systemless, thanks for Chainfire) images for Moto X Style with Marshmallow (build MPH24.49-18). Its use "experimental" systemless SuperSU version 2.56 - more info on http://forum.xda-developers.com/showpost.php?p=63197935&postcount=2. No need replace bootloader or recovery. Still need unlocked booloader.
Because TWRP didn't work in this version of bootloader (0xA048), I cooked "su.img" in a Linux box and used "/data/local/tmp" as bridge (accessible by ADB).
WARNING! I am not responsible for any harm on your phone. When you're not sure if you can do it, leave it!
For use, you need
1) unlocked bootloader.
2) if your bootloader not unlocked, make sure you have copy of your data, because this process will erase your device.
3) install ADB and FASTBOOT on your pc using minimal ADB or Android SDK.
4) install ADB drivers from Motorola or Universal ADB.
5) download provided files.
6) download SuperSU ver. 2.56 from http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344.
Steps:
1) extract files in a folder of your choice (su.img, boot.img).
2) extract Superuser.apk from SuperSU-v2.56-20151030013730.zip from common folder.
3) enable USB debugging on Android.
4) connect your device on pc.
5) open a command prompt in a new folder.
6) type "adb push su.img /data/local/tmp" without quotes.
7) type "adb install Superuser.apk" without quotes.
8) now reboot your device into fastboot mode by typing "adb reboot bootloader".
9) type "fastboot flash boot boot.img" without quotes.
10) type "fastboot reboot" without quotes.
And enjoy!
Now you have a rooted MotoX Style Marshmallow. To apply any OTAs, you only need reflash stock boot.
Ivan

Do I still need to unlock the bootloader in order to root this device

ivcarlos said:
2) write "boot.img" with fastboot.
Click to expand...
Click to collapse
What do you mean? Como assim?

Oh I see thanx partner

How can I copy "su.img"?
If no Root I can not copy into data/local/tmp.

Marccelllorzn said:
How can I copy "su.img"?
If no Root I can not copy into data/local/tmp.
Click to expand...
Click to collapse
Restart in bootloader
1) adb push su.img /data/local/tmp
2) fastboot flash boot boot.img
3) Install SuperSu ver 2.56 apk

would this work on xt1575 us? if not why?..... i mean .. why the indian MM would work 4 any variation and this one would not?

zittorb said:
would this work on xt1575 us? if not why?..... i mean .. why the indian MM would work 4 any variation and this one would not?
Click to expand...
Click to collapse
Yes, work with XT1575.

I dont test on another device, only on XT1572.
After 24h, no errors, work like a charm.
With this approuch you dont need to downgrade bootloader.

assuming that we need a "CLEAN", unrooted system for this as advised by @Chainfire in his instructional post regarding this experimental root method!
Instructions
You must absolutely re-flash your stock /system partition, or the separate root instances will interfere with each other. The installer for this experiment will not clean up old root files.
- Flash stock /system
- Flash the attached boot image
- Flash the attached SuperSU ZIP in TWRP
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=63197935&postcount=2
Also you should probably make a point of mentioning that this method is an experiment.
Aside from this, let me take my "high-visibility" jacket off, along with my "safety helmet" and say thank you very much for taking the time to do this for us all @ivcarlos! You are a gentleman!

Is Android pay confirmed working with this root method?
Sent from my XT1575 using Tapatalk

@bb12489
I dnt know because I dnt use this feature.
@Doktaphex
I dnt mentioned this - clean and unrooted system - because after apply OTA on XT1572, custom recovery (TWRP) didn't work anymore. By the way, I assume no root and clean system.
I know this method is "experimental", but it's best at this time, without downgrade bootloader (not safe).
Thanks for comments! I make this work because I need root and I dnt like to make heavy changes on smart...
In this way, I share for everyone.

ivcarlos said:
@bb12489
I dnt know because I dnt use this feature.
@Doktaphex
I dnt mentioned this - clean and unrooted system - because after apply OTA on XT1572, custom recovery (TWRP) didn't work anymore. By the way, I assume no root and clean system.
I know this method is "experimental", but it's best at this time, without downgrade bootloader (not safe).
Thanks for comments! I make this work because I need root and I dnt like to make heavy changes on smart...
In this way, I share for everyone.
Click to expand...
Click to collapse
Could you please give me the link that how you created modified boot.img ? I want to make it work on Indian XT1572

@gulshanstrider
I make boot image based on post of Chainfire (http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344), with applying steps:
1) unpack stock "boot.img";
2) patch sepolicy;
3) edit "init.rc" and "init.environ.rc";
4) edit "file_contexts";
5) repack "boot.img".
Use Chainfire generated images with model.
Without TWRP, I cooked "su.img" in a Linux box, and use "/data/local/tmp" with bridge.

ivcarlos said:
@gulshanstrider
I make boot image based on post of Chainfire (http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344), with applying steps:
1) unpack stock "boot.img";
2) patch sepolicy;
3) edit "init.rc" and "init.environ.rc";
4) edit "file_contexts";
5) repack "boot.img".
Use Chainfire generated images with model.
Without TWRP, I cooked "su.img" in a Linux box, and use "/data/local/tmp" with bridge.
Click to expand...
Click to collapse
wifi not working now please tell me how to revert everything back pleaseeee help !!!!

Shishir Singhal said:
wifi not working now please tell me how to revert everything back pleaseeee help !!!!
Click to expand...
Click to collapse
Your model is XT1575 or XT1572?

Shishir Singhal said:
wifi not working now please tell me how to revert everything back pleaseeee help !!!!
Click to expand...
Click to collapse
@Shishir Singhal
Whats your model and version?
I make this image for my XT1572 (BR, dual) and wifi working.
To revert back you must write back stock boot.img version. On first post I provided stock of XT1572 RETLA 6.0 (my base).
On my device no issues at all.

Not working on my XT1572
Didn't work on my XT1572 with Android 6.0.
Enable root option is disabled in SuperSU with a message saying that system-less root is currently not supported.

ivcarlos said:
@Shishir Singhal
Whats your model and version?
I make this image for my XT1572 (BR, dual) and wifi working.
To revert back you must write back stock boot.img version. On first post I provided stock of XT1572 RETLA 6.0 (my base).
On my device no issues at all.
Click to expand...
Click to collapse
Thank u for quick reply got it working by flashing NON-HLOS.bin now everything is working fine thank u soo much

roberto.marcal said:
Didn't work on my XT1572 with Android 6.0.
Enable root option is disabled in SuperSU with a message saying that system-less root is currently not supported.
Click to expand...
Click to collapse
What version of SuperSU you was installed?
You put "su.img" into "/data/local/tmp"?
If you enter in shell with ADB, ls command show "su" directory in root? Image was monted successfully?

Install any A1 Pie Custom Rom on 5X

Hi,
Finally I could find a solution to install Pie rom on mi 5x.
I try to install Pixys Os that find on A1 Page(This).
You Can follow this steps and install this rom on your Device.
1- Downlod Any A1 Pie custom rom.
2- Download payload_dumper-win64.zip From this link.
3. Extract system.img and boot.img from custom rom zip file by 2.
4.Unzip payload_dumper-win64.zip and then Unzip custom Rom and get payload.bin from extracted files then follow this stages in payload_dumper-win64 Folder.
a.Put payload.bin to "payload_input" folder
b.Run payload_dumper.exe
c.Successfully extracted img files are in "payload_output" folder
5- Download GApps: OpenGApps
6- Download and install this TWRP recovery modded treble support for tiffany.
7- copy system.img and boot.img that Extracted from 4 to your Device.
8- copy GApps zip file (from 2 ) to your device.
9- Boot to recovery .
10- Wipe the System, Cache, Data and ART/Dalvik cache.
11- Go to Install menu then press Install image on the bottom of page then Select system.img and flash it to system.
12- Then Select boot.img and flash it to boot.
13- Reboot to Fastboot.
14- Install Oreo Modded TWRP 3.2.1-0 from this link.
15 -Boot to recovery and Go to Terminal menu and run a1to5x command.
16- Reboot to Fastboot.
17- Again install this TWRP recovery modded treble support for tiffany. Unfortunately This version dont have a1to5x command. and we must install 9 for run this command.
18- Boot to recovery .
19- Install Gapps and Magisk.
20- Reboot your device.and Enjoy.

How's battery life on this rom?

zsolthajdu said:
How's battery life on this rom?
Click to expand...
Click to collapse
Good like Oreo Rom AEX.

does this rom must flash A1 Firmware or not?

Matt RJ said:
does this rom must flash A1 Firmware or not?
Click to expand...
Click to collapse
Yes. For fingerprint in all A1 roms you must flash A1 firmware.

I have bug when I swipe home buuton at the homescreen it's opening to the drawer.
did you face same problem with me?

Its rom stabil? Or have bug?

I'll be waiting till it fully stable and everything op said is fine , and easier to install . Currently I don't have a computer lol , cant risk . About purely installing .img file and I can't do anything fastboot thing atm, ....suck

Jackson EH said:
I'll be waiting till it fully stable and everything op said is fine , and easier to install . Currently I don't have a computer lol , cant risk . About purely installing .img file and I can't do anything fastboot thing atm, ....suck
Click to expand...
Click to collapse
Though its a good decision bro cz u've to flash recovery twice via cmd. bt in my case rom is 95% stable. facing only 1 bug tht whenever i want to enter into battery option it says force closes

ghtam said:
Though its a good decision bro cz u've to flash recovery twice via cmd. bt in my case rom is 95% stable. facing only 1 bug tht whenever i want to enter into battery option it says force closes
Click to expand...
Click to collapse
You have bug when you swipe up on homescreen?

RDFARHAN said:
You have bug when you swipe up on homescreen?
Click to expand...
Click to collapse
no bro. swiping up to home screen is absolutely perfect for me

ghtam said:
no bro. swiping up to home screen is absolutely perfect for me
Click to expand...
Click to collapse
I follow step by step from the instructions but the device not boot into system, stuck on mi Logo and reboot all the time, any solution?

am2000 said:
Hi,
Finally I could find a solution to install Pie rom on mi 5x.
I try to install Pixys Os that find on A1 Page(This).
Can i install the latest version of pixys-OS system & boot by following ur instruction?
Click to expand...
Click to collapse

ghtam said:
am2000 said:
Hi,
Finally I could find a solution to install Pie rom on mi 5x.
I try to install Pixys Os that find on A1 Page(This).
Can i install the latest version of pixys-OS system & boot by following ur instruction?
Click to expand...
Click to collapse
Yes, You can install any A1 Custom Pie rom by this solution.
But you must extract system.img and boot.img from custom rom.
Click to expand...
Click to collapse

am2000 said:
ghtam said:
Yes, You can install any A1 Custom Pie rom by this solution.
But you must extract system.img and boot.img from custom rom.
Click to expand...
Click to collapse
can i copy & paste system/boot from zip file to extract?
Click to expand...
Click to collapse

ghtam said:
am2000 said:
can i copy & paste system/boot from zip file to extract?
Click to expand...
Click to collapse
edit post 1 and describe how install any custom rom
Click to expand...
Click to collapse

امتحان نکردم ولی ایولا داری.خوشم اومد داداش

xp7 said:
امتحان نکردم ولی ایولا داری.خوشم اومد داداش
Click to expand...
Click to collapse
قربونت داداش

ایول مشتی
سلام. دمت گرم :good:واقعا عالی.
فقط یه سوال.
فقط اندروید پی یا اورو هم میشه؟

Pixel experience Rom [9.0]for mi 5x is out now, u can install like other custom ROMs.

[how to] install pixel experience (all working) [pie] [9.0] gsi

Hello guys, in this thread i will make guide about how to install Pixel Experience (or another GSI with TWRP, and all works on GSI) in Mi A2 Lite
What you NEEDED?
Twrp >>>>>https://mega.nz/#!WEhEXKpY!RdyqEgYyj80K9PAvIS6yXA1Hh8GiLSSde2i219DxRy0 (thanks to @Seryioo)
TWRP FIX>>>> https://androidfilehost.com/?fid=11410963190603893418 (thanks to @mac12m99)
GSI IMG>>>> https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
ABOOT 9.6.4>>> https://androidfilehost.com/?fid=11410963190603884024 (thanks to @mac12m99)
(P)ROM: http://bigota.d.miui.com/V10.0.3.0....0.PDLMIXM_20190114.0000.00_9.0_e8d8d4a6d0.tgz
(O)ROM: http://bigota.d.miui.com/V9.6.4.0.O...0.ODLMIFF_20180724.0000.00_8.1_4afd3431a2.tgz
Vendor from OREO ROM- Extract on Downloaded (O rom) (9.6.4 is better)
Modem from OREO ROM- Extract on Downloaded (O rom) (9.6.4 is better)
Custom kernel>>> https://androidfilehost.com/?fid=1395089523397900247 (Thanks to @AhmedHady)
Fix Sim Card Swipe>>>>https://forum.xda-developers.com/attachment.php?attachmentid=4704476&stc=1&d=1550012435 (thanks to @eremitein)
1- Extract PIE stock and OREO stock in any folder
2- Copy vendor and Modem.img from Oreo Stock to Pie Stock
3- Copy GSI image to folder Pie Stock and rename to system.img and replace it
4- Copy twrp img and twrp installer and Kernel zip and aboot_9.6.4.img, and modemfix zip to adb and fastboot Folder. If you no have adb, download in here: https://androidfilehost.com/?fid=962187416754459552
5- Go to Pie Rom folder and execute flash_all.bat (your phone in fastboot mode)
6- after finish, reboot to fastboot again and open adb and fastboot e paste this command: fastboot boot twrp-3.2.3-0-daisy_zero.img
7- hit cancel encryption in twrp, and enable adb sideload in advanced menu
8- paste this command: adb sideload CAF-Kernel-daisy-20190223-2158.zip
9- enable adb sideload again and paste this command: adb sideload fixed-twrp-installer-daisy.zip
10- enable adb sideload again and paste this command: adb sideload modemfix_daisy__zero.zip
10- NOT REBOOT SYSTEM, tap reboot and Bootloader in twrp
11- paste this command: fastboot flash aboot aboot_9.6.4.img
12- reboot to twrp and go to wipe>>advanced>> format data and type yes. After, resize partition of system and data.
13- That's All
ScreenShots
https://imgur.com/a/b2msFTV

Basic English leangue tell me pls.
Don't have a full package? I want to handle it in one and simpler way.
I want to use pixel experiance (android pie)

factor19300 said:
Basic English leangue tell me pls.
Don't have a full package? I want to handle it in one and simpler way.
I want to use pixel experiance (android pie)
Click to expand...
Click to collapse
There is no one click installment for this phone if you wanna use a custom rom. If you want it simple in basic English language just flash the latest stock rom with miflash.
Sent from my Phh-Treble vanilla using Tapatalk

Are there regular updates to the rom (like security updates)? If yes, is it just an easy to update OTA or do you have to go through all these steps again?

downloadonlyaccount said:
Are there regular updates to the rom (like security updates)? If yes, is it just an easy to update OTA or do you have to go through all these steps again?
Click to expand...
Click to collapse
maybe it's easy, because is the same rom. Idk

Vitor00 said:
maybe it's easy, because is the same rom. Idk
Click to expand...
Click to collapse
lmao, no offense, but if you don't know it, why do you reply then ?

downloadonlyaccount said:
lmao, no offense, but if you don't know it, why do you reply then ?
Click to expand...
Click to collapse
no offense either, but questions were asked to be answered, and the "do not know" is an answer to the question too

downloadonlyaccount said:
Are there regular updates to the rom (like security updates)? If yes, is it just an easy to update OTA or do you have to go through all these steps again?
Click to expand...
Click to collapse
ota not supported in gsi
for update you need only do this "fastboot flash system system.img"

downloadonlyaccount said:
Are there regular updates to the rom (like security updates)? If yes, is it just an easy to update OTA or do you have to go through all these steps again?
Click to expand...
Click to collapse
GSIs don't get updated often but when they do you can just flash it over your system. :good:

Cara tudo bem?
Pode me dizer a diferença dessa rom para o pie atual?
(desculpa a pergunta besta)

I did everything the same as the guide and it did not work. does not start the system

Vitor00 said:
Hello guys, in this thread i will make guide about how to install Pixel Experience (or another GSI with TWRP, and all works on GSI) in Mi A2 Lite
...
4- Copy twrp img and twrp installer and Kernel zip and aboot_9.6.4.img, and modemfix zip to adb and fastboot Folder. If you no have adb, download in here: https://androidfilehost.com/?fid=962187416754459552
10- enable adb sideload again and paste this command: adb sideload modemfix_daisy__zero.zip
ScreenShots
https://imgur.com/a/b2msFTV
Click to expand...
Click to collapse
I think you forgot to mention the URL for modemfix_daisy__zero.zip file on your "What you NEEDED?" list.

BJumperBR said:
I think you forgot to mention the URL for modemfix_daisy__zero.zip file on your "What you NEEDED?" list.
Click to expand...
Click to collapse
this is it
Fix Sim Card Swipe>>>>https://forum.xda-developers.com/att...1&d=1550012435 (thanks to @eremitein)

Question Custom recovery issue

So I am really new to custom roms and stuff but I recently flashed arrow os 12 after getting tired of miui but I can't access the interal storage on twrp and orange fox to install zip files, it says 0mb
Is there any solution?

Allahy3een said:
So I am really new to custom roms and stuff but I recently flashed arrow os 12 after getting tired of miui but I can't access the interal storage on twrp and orange fox to install zip files, it says 0mb
Is there any solution?
Click to expand...
Click to collapse
Yes, the easiest way is to sideload the zip from your computer. So:
- Connect your phone to your computer
- Run adb on your computer (adb devices will do)
- Reboot your phone into recovery
- Start sideload in recovery (in twrp it's under advanced, don't know about orangefox, not used it)
- Run cmd 'adb sideload {path to zip}'

dt_matthews said:
Yes, the easiest way is to sideload the zip from your computer. So:
- Connect your phone to your computer
- Run adb on your computer (adb devices will do)
- Reboot your phone into recovery
- Start sideload in recovery (in twrp it's under advanced, don't know about orangefox, not used it)
- Run cmd 'adb sideload {path to zip}'
Click to expand...
Click to collapse
Thanks man
can I downgrade to arrow os 11 using this method also?

Allahy3een said:
Thanks man
can I downgrade to arrow os 11 using this method also?
Click to expand...
Click to collapse
Yes, ensure you do a backup of any data you want to keep, then a data wipe via recovery before you flash a new ROM.

dt_matthews said:
Yes, ensure you do a backup of any data you want to keep, then a data wipe via recovery before you flash a new ROM.
Click to expand...
Click to collapse
Thanks

You can also use dfe zip files. After you flash the rom wipe data and flash dfe. It will leave data uneencrypted. Or use crdroid 8, it have disabled encryption of data

lsander said:
You can also use dfe zip files. After you flash the rom wipe data and flash dfe. It will leave data uneencrypted. Or use crdroid 8, it have disabled encryption of data
Click to expand...
Click to collapse
Thanks