Related
I was at my local Best Buy today looking at phone accessories when I came across this case and holster for the Nexus One. As I looked closer at it, it looked very similar to the Seidio case and holster, only it was branded Platinum. Upon further inspection, I noticed on the bottom of the packaging in small letters that it was indeed a Seidio product. What really surprised me though was that it was only $10, instead of $35 like the other cases and holsters around it, so I snatched it up right then and there.
Since all the other Platinum brand case/holster were still full price, I can only assume that they are discontinuing this in the stores. I looked on their website and it's still listed for $35. So if you've been looking to get this case and holster, I'd suggest you hit your local Best Buy and hope they still have them in stock before their gone.
I got the same one from the local best buy by me. Solid case and holster for $10. Well made and has all the needed openings for microphones, ports, ect. Phone fits face in or face out in the holster.
Appears to be a rebranded Siedo Innocaseā¢ II Surface Combo - Black which retails for $50 on the Siedo website.
Only problem is (like other cases) you have to remove it to fit it into the desk/car dock. Still a good value.
I picked one up yesterday and tried to put it on. First off, as I was sliding the top part in slowly, it took the screen protector off with it on the upper left side. Then the rubbery material on the inside of the case peeled off as well. I had to replace the screen protector. I took it back today to exchange it. I got it on this time, but again, the upper left side of my screen protector began bubbling really badly so I took it off immediately. Now, my screen protector has these scratch lines where the case overlaps the screen and glides on when sliding on the phone. I'm glad I had a screen protector on or else the case might've scratched my actual screen. I've always had a problem with the seidio case and I was hoping this one would be different, but its not.
bskim23 said:
I picked one up yesterday and tried to put it on. First off, as I was sliding the top part in slowly, it took the screen protector off with it on the upper left side. Then the rubbery material on the inside of the case peeled off as well. I had to replace the screen protector. I took it back today to exchange it. I got it on this time, but again, the upper left side of my screen protector began bubbling really badly so I took it off immediately. Now, my screen protector has these scratch lines where the case overlaps the screen and glides on when sliding on the phone. I'm glad I had a screen protector on or else the case might've scratched my actual screen. I've always had a problem with the seidio case and I was hoping this one would be different, but its not.
Click to expand...
Click to collapse
I don't use a screen protector myself, I've had the case on and off a handful of times since I got it and it doesn't appear to be scratching the screen. I do agree though that the little rubber pieces on the inside do tend to move around a bit, but I've found that if you squeeze the case in as you slide it onto and off the phone, it minimizes the chances of the rubber moving.
Overall, I've always been very happy with Seidio's holster clips, but have to have a case on my phone cause I've very tough on phones, so I'd say the Innocase is perfect.
Now I just need to rig up a way to use the phone in the official car and home dock without having to remove the phone from the case. Gonna have to whip out the Dremel tool, soldering iron and some wood. If I get really ambitious, I may even cast some plastic molds of the phone.
Thanks for the heads up on the case. I went to my local best buy and they did not have it on display. I had to ask one of the cellphone associates to get it for me out of the back. Their SKU is: 9943421 for $9.99 regular price $34.99.
I've been using the Case-Mate tough case exclusively since I purchased the phone in March. All I can say is I'm amazed at how thin this case is. It feels as if there really is no cover on the phone. The addition of a secure belt clip is a HUGE plus in my book. My only gripe so far is I don't think this case will do much good in protecting the phone from a drop out of your pocket or coat.
Funny you should say that, I too just switched from the Tough Case as well. I did love the CM case for the combination of shock absorbing rubber and hard plastic shell, but it made the phone too bulky. As for the Seidio, it may be thin and not offer as much protection as the CM case, but take into account that the shell of the phone itself is metal and hard plastic and comes into direct contact with the screen. Any drop is going to transfer from the shell and into the screen most likely causing it to break. A case on the phone, even a thin one, is still more flexible than the phones shell and absorb most impacts. Even if the case itself breaks in a fall, better a $10/$35 case then a $579 phone.
garfnodie said:
Funny you should say that, I too just switched from the Tough Case as well. I did love the CM case for the combination of shock absorbing rubber and hard plastic shell, but it made the phone too bulky. As for the Seidio, it may be thin and not offer as much protection as the CM case, but take into account that the shell of the phone itself is metal and hard plastic and comes into direct contact with the screen. Any drop is going to transfer from the shell and into the screen most likely causing it to break. A case on the phone, even a thin one, is still more flexible than the phones shell and absorb most impacts. Even if the case itself breaks in a fall, better a $10/$35 case then a $579 phone.
Click to expand...
Click to collapse
After a few hours of using it, I switched back to my tough case. I just can't get over how "under protected" the phone feels. I did however use the Seido case when I had to wear a suit earlier this week. I like having my phone on my belt in those cases. For 10$ its a nice option to have.
Now if there was only a way to get the Seido holder to hold the n1 with the tough case on it.....
No joy at my local best buy - but I found an open-package one on Ebay for $7.99 with free shipping - same item.
Open package is no big deal to me though...
Thanks for opening my eyes to this product!
just got this as my seido case was getting really messed up.
the only difference i see is that the inside is rubber rather than seido's felt interior
krazichinaman said:
After a few hours of using it, I switched back to my tough case. I just can't get over how "under protected" the phone feels. I did however use the Seido case when I had to wear a suit earlier this week. I like having my phone on my belt in those cases. For 10$ its a nice option to have.
Now if there was only a way to get the Seido holder to hold the n1 with the tough case on it.....
Click to expand...
Click to collapse
Sound's to me like what you need is the Seidio rugged case. It's similar to the Tough case in that you get a thick rubber wrap with a plastic shell around it, and then that fit's into a special spring holster.
http://www.seidioonline.com/product-p/bd4-hkr4hnx1.htm
I'm sticking with the regular case/holster as that will more than protect the phone from even a tall drop.
what is the best epic 4g case? post yours...
I bought the Black Samsung one from the Sprint store for $19.99. It works great and does what I want.
Yeah, I know. I'm boring
TheCraigJ said:
I bought the Black Samsung one from the Sprint store for $19.99. It works great and does what I want.
Yeah, I know. I'm boring
Click to expand...
Click to collapse
haha the sprint cases are fin & your not boring..
I'm using the Seidio Innocase Surface case/holster combo. Nice tactile feel on the case, and the secure spring-clip holster does really well, especially with my clumsy arse...
Sent from my SPH-D700 using XDA App
Definition of the "best" case would be different for every person because it depends on personal preferences, how you use your phone, and how you carry it. Personally, I like the feeling of a naked phone and with my Touch Pro 2 I mostly used Forte leather case (although I tried Seidio Surface for a short period). The advantage of a leather pouch is that you don't have any permanent thickness added to your phone, but disadvantages are that you need to take the phone out of the case to see the screen and you can still drop the phone while out of the case - which is exactly what happened to me a few times. Now when I got Epic, it is thinner then TP2 so I wanted to get a snap-on case for it. Here is my mini-review of a few cases I tried:
1) Seidio Active - it is the case that (among other snap on cases) would definitely provide the best protection if the phone is dropped, it looks good, and made well. The soft gel provides a nice cushion and the plastic skeleton strategically positions hard coverage over areas that could be most impacted during the fall. It seems that the recently found Fishbone case on Amazon is very similar in the design so I would expect it to provide the same protection. Unfortunately, Seidio Active was a bit too thick to my liking and since I usualy take good care of my phones, I didn't feel that the extra protection would justify the added thickness for my needs.
2) Seidio Surface - this is probably the thinnest snap on case you can get. I really like the fact that it adds very little to the overall size of the phone and I thought that it would be the perfect case for me when I bought it and put it on. However, maybe the fact that it is so thin contributed to the fact that it feels a bit flimsy when on the phone. There is a tiny bit of play on both the top and bottom parts (when you squeeze them with your fingers on the sides) and sometimes when you push power button the phone tends to slide open a bit based on how I hold it in my hand. The case seems to fit like a glove but it is not as tight as I would like it to be and it is VERY easy to remove the top part with almost no effort whatsoever. Some may consider it a plus, but I consider it a minus because I am pretty sure that if the phone is dropped, the top part will most likely fall off after the first bump leaving the top unprotected (this actually did happen when I used Seidio Surface case on my Touch Pro 2 and dropped from about 3 feet onto hardwood floor).
3) Sprint Case with rubber back - to me this turned out to be the "best" case, at least for now. In terms of added thickness it is somewhere in between Seidio Active and Surface cases. It fits very snug and tight. I like the rubber backing a lot, it is not slippery, feels very nice in hand, and looks good (at least in black). Some people mentioned that the rubber has a tendency to peel off - I've had this case for a month now and it looks like new and I have no peeling issues; but even if I do, I am sure that a carefully placed drop of crazy glue will take care of this issue permanently. I have removed the case several times and I don't see any scratches left on the phone as was posted in one thread. The only drawback may be that the case is a bit harder to remove then Seidio, but to me it is not an issue and means that it will stay on during the fall. I rarely remove the top part, but I am a heavy phone user so I swap extra battery often and don't have any issues removing the bottom part after getting used to it. There were some reports of snaps breaking off - I have not experience that at all and I hope I won't since this is a perfect case for me at this point.
In terms of price - all three cases are around $20 bucks so price is not a factor. All three cases do not interfere with the sliding mechanism and make the phone feel a bit tighter with less screen play and no more squeaking from the battery door. I also tried one of those invisible shield things which is basically a screen protector over the entire phone. Two issues I found with those: a) no matter what brand you get, they will eventually start peeling and will attract dirt on the edges looking like crap after a while; b) although they provide scratch protection, they won't do much if the phone is dropped.
Hope you'll find your best case.
Cheers.
My sprint case has all the tab breaking off after about a month and a half of use. YMMV.
Geekybiker said:
My sprint case has all the tab breaking off after about a month and a half of use. YMMV.
Click to expand...
Click to collapse
I wonder if this has to do with how different people remove/put it on. I usualy pick the two corner clips on the charger side with my nail and it removes pretty easily after that (just slide it off). When I put it back I do it in reverse order - I slide the bottom two clips on first and then snap the top ones on. So far it's been working well for me.
I'm using a black Seidio Innocase (regular not active) with the spring clip holster and I love it. I originally had the body glove case and it was just too big.. felt like I was carrying a brick in my pocket. The Innocase doesn't add much bulk and gives a bit of protection from random bumps and scratches. Has a pleasant lip around the screen too so laying the epic flat on its face keeps the screen from contacting a surface.
Sent from my SPH-D700 using XDA App
My experience with case durability is completely different from gorby911's, so it's all YMMV. My Sprint case completely fell apart in 1.5 months of use, what with the clips breaking off, and 2 corners of the rubber backing peeling away. Even after Gorilla-gluing one of the corners, it peeled off again within a week! Just got a Seidio Surface and it fits very snugly and no play.
The downside of the Surface is that its rubberized texture is actually quite slippery, vs. the grippy texture on the Sprint case (especially with its rubber backing). It slightly twists and slips around in my hand that supports it while I'm swiping around with my other hand. But it's got a much thinner profile with what I feel appears to be the same amount of protection.
I hope it lasts more than 1.5 months long.
So the sedio active is the slimmest case? May have to check that out, thanks for the info.
ranchosteve said:
So the sedio active is the slimmest case? May have to check that out, thanks for the info.
Click to expand...
Click to collapse
Seidio innocase should be the thinnest.
I've been using the BodyGlove that has a the smoked chrome. Stylish and strong. Dropped it a few times and everything's still fine. Sprint Direct/Indirect stores have them available.
gorby911 said:
I wonder if this has to do with how different people remove/put it on. I usualy pick the two corner clips on the charger side with my nail and it removes pretty easily after that (just slide it off). When I put it back I do it in reverse order - I slide the bottom two clips on first and then snap the top ones on. So far it's been working well for me.
Click to expand...
Click to collapse
I have both the Innocase Surface and the black Sprint case and I too have had no problems with my Sprint case - I take off the back of the case exactly as you have described. Not a single scratch on my phone yet (knock on wood). I prefer the Sprint case over the Innocase as it seems to offer better protection.
For those who are curious, the black Sprint case fits in the Seidio Innocase Holster (the one designed for the Innocase Surface at least). I bought the $40 Innocase/holster combo at Best Buy, but am using the holster with my Sprint case.
I'm using this one. Got it off fleabay for $8.99. Really nice OEM leather case that fits great. I can't stand a phone in my pocket so I have mine on my belt.
Hey guys,
Just bought the Incipio Feather case and wanted to share my thoughts in case some people were thinking about buying.
The case is definitely very light weight and pretty thin (Incipio states that it is less than 1 mm thin). It's an "ultra light, ultra strong polymer" hard case that is smooth to the touch while having a slightly rubbery feel to it. The case itself has very clean edges with no trace of any manufacturing defects. There are cutouts for the power and volume buttons, hdmi port (it's covered in the pictures on their site, but there is indeed a cutout for this), usb port, camera, microphone, headphone jack, and speakerphone. With the exception of the battery, everything is easily accessible through these cutouts.
As for protection, this is where I've been disappointed. First off, the side of the case does not rise above the side of the phone, so when you put the phone face down, the screen will be touching the surface (they provide a screen protector, but I don't think that's enough). Secondly, the case does not completely wrap around the phone, so both the top and, more importantly, the bottom of the phone are exposed. The bottom is important because on a straight drop, the pointed part of the phone will take all of the impact because it protrudes beyond the corner parts of the case. The top isn't as bad because it's flatter, so the corner portions of the case will ideally take the impact. Granted, you aren't purchasing a "feather" or "barely there" case for its protective qualities, but I think that had Incipio manufactured the case to fully wrap around the phone, both the protection and aesthetics of the case would have been enhanced.
In regards to the aesthetics, I purchased the case to avoid the bulkiness of other cases so that I could enjoy the look of the phone. However, the cutouts and the fact that the case doesn't fully wrap around the phone cause the Feather case to "break" the smooth lines of the phone. I would definitely prefer the look of a case that fully wraps around the phone.
Overall, I would not purchase this case again. At $25, even with the screen protector and microfiber cloth, I think that a case like the Androidified case that I previously reviewed provides better value with more protection. With the TPU case, my phone experienced no damage after I accidentally dropped the phone while getting out of a car. I can't say that the Feather case would provide the same sort of protection.
Thanks for the review, this was my favorite case when I had my Atrix. I noticed it on the site the day it went up but did not buy it because an employee confirmed over live chat that there was no hdmi cutout. Now that I know it is there I am placing an order now. I just bought the otterbox and I like it but its just too much for me.
This is almost the same exact case as this:
http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&accessoryId=47557
But yours is probably a tiny bit thinner. And this one has a pull out stand which is awesome. They tried to sell this hardcore when i bought the phone, and I got it then.
Syn Ack said:
This is almost the same exact case as this:
http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&accessoryId=47557
But yours is probably a tiny bit thinner. And this one has a pull out stand which is awesome. They tried to sell this hardcore when i bought the phone, and I got it then.
Click to expand...
Click to collapse
The Incipio also doesn't have those rubber ridges. I had one of these cases on my Thunderbolt and I hated it because I keep my phone in my pocket. Went with a Case-Mate Barely There case which seems to be similar to the Incipio.
It reminds me of an ultra light 1 piece Seidio innocase. It has a similar feel but its lighter and thinner.
After using this case for a few days I have to agree. This case is not worth it at all. The feather used to be my choice but incipio did not do well with this one.
I'm really hoping case-mate jumps on it and makes a barely there case for the Charge.
http://feedback.case-mate.com/forum...867323-samsung-droid-charge-barely-there-case
immaage said:
I'm really hoping case-mate jumps on it and makes a barely there case for the Charge.
http://feedback.case-mate.com/forum...867323-samsung-droid-charge-barely-there-case
Click to expand...
Click to collapse
Yeah same here. I went back to my Otterbox case but I just ordered the Trident Aegis today. I would rather have a thin light case but this feather is just plain terrible.
Why you going with Trident Aegis..instead of just using the Otterbox?
Just curious on your thoughts on the Otterbox..did you get the Trident? How is it?
The Otterbox is a good case but I am not too sold on having the buttons on the bottom covered. The Trident case shipped today and I will post pics and a review of the Aegis when it comes.
Okay guys I'll start this off by saying that I am not impressed with the current case selection for this phone. Now, let's begin with the review.
1.The first case I'll start with will be my Rearth Ringke Fusion hybrid case. I loved this case to death when I first received it on the same day I got my phone, and it has been my favorite case since I got my new one (more on that in a minute ). It feels great in the hand, as it's completely ergonomically similar to the phone itself, and the button feedback is a dream. The clear plastic back has much to be desired, however. The plastic smudges, smears and attracts fingerprints like no other. It also is slippery. VERY slippery. Keep in mind that I have hands that are almost always moist in some form or fashion, so the back plastic of this thing felt like butter. All in all, a very good case and I highly recommend it, except for those with moist hands!
2. Next is my replica Google official bumper. (Replica is perfectly identical to the actual one.) I bought this bumper in conjunction with a carbon fiber dbrand skin, (I still have that on, props to dbrand for making the best skin in the world!) and I was honestly a little disappointed. The stippled texture that bands the sides and sandwiches the fake aluminum plastic piece together feels amazing in the hand. My moist sweaty hands had no problems gripping this bumper, except for the fake aluminum plastic piece that I just mentioned. It's not totally matte, but it's not totally glossy either, it's an odd mixture that feels great to touch, but for me it was a tad slick. It wasn't nearly as bad as the Ringke Fusion case but it was enough for me to take it off sometimes. The buttons clicked with pride and although it did add quite a bit of width to the phone, it had an awesome fitment, no flex or peeling of materials found on this bumper! I would still definitely recommend this case despite the negatives.
3. The other day, (Friday), I received my Mercury TPU case (black), and boy let me tell you something. My hands promptly said NOPE right when I got it on the phone. For some reason I must've been on some crazy drug and bought the thing thinking that it would be some grippy, sticky rubber case. WRONG. All I'm going to say on this one is, misaligned speaker and microphone cutouts, super slippery and the finish on the face of the skin where you see it almost all the time has an orange peel look to it, almost like a ZAGG screen protector. However, the sparkles on the back really made me want to play some funky music!
4. Today, (about 15 minutes before I wrote this), I got my Ringke Slim case in the mail. One complaint: I got an older version, the one with the loose volume slot, but it's not a big deal as I can't really hear any creaking. Other than that minor mishap, for the fifteen minutes I've been using this thin case, and it is EXTREMELY thin, I'm proud to say that this is my favorite case thus far. The matte finish has a soft-touch coating on it that feels like heaven, the button cutouts and speaker, mic cutouts are spot on and without flaws. Most people don't notice it, but this case actually has four little feet on the screen side on the case that allows you to set the phone on it's face and not get the screen scratched. Nice!
The complete lack of top coverage is nice FOR ME because I can finally put my ATH-M50's in my phone without having to remove the case! :good:
Keep in mind that the Slim is a totally different case than the other three, most similar to the bumper however.
Here are links to each of the cases on their respective websites, (if such site exists).
1. http://www.rearthusa.com/google-nexus-4-hybrid-fusion-case
2. https://play.google.com/store/devices/details/Nexus_4_Bumper_Black?id=nexus_4_bumper_black&feature=accessories#?t=W251bGwsMSwyLDExMSwiZGV2aWNlLW5leHVzXzRfYnVtcGVyX2JsYWNrIl0.
3. http://www.amazon.com/Mercury-Flexible-Google-Nexus-Black/dp/B00AOW8ICQ/ref=sr_1_1?ie=UTF8&qid=1369864701&sr=8-1&keywords=nexus+4+mercury
4. http://www.rearthusa.com/google-nexus-4-ringke-slim-case
I've been in search of a case i'll actually like. Been thinking about getting the ringke slim but i'm just afraid of the lack of protection. I've never dropped my n4 but for that one time that i do, it'll be great to have the protection.
I also have the ringke fusion, it's a nice case but the back gets dirty and gross pretty easy. The official bumper just feels bulky and my headphones don't fit.
got my Ringke Slim 4 days after i got my n4, had the official bumper ordered with the phone but it just made it too bulky for my taste.
Had my ringke the rest of the time and never looked back. it IS the best case i've ever used on a phone. this comiing from a person who doesnt like to put cases on phone but with this phone just wanted that extra protection. its very slim and doesnt add any bulk what so ever. going on 6 months with the slim and still rocking it.
I own three of the four cases that op reviewed. Exactly my same thoughts for the most part. Pretty well done review. Kudos. Although I would be semi cautious about the official bumper as its known to cracking on the bottom of the usb port. The slim is a really nice case but if covering the back isn't your thing then it isn't the case for you.
Sent from my Nexus 4 using Tapatalk 4 Beta
Tempist305 said:
3. The other day, (Friday), I received my Mercury TPU case (black), and boy let me tell you something. My hands promptly said NOPE right when I got it on the phone. For some reason I must've been on some crazy drug and bought the thing thinking that it would be some grippy, sticky rubber case. WRONG. All I'm going to say on this one is, misaligned speaker and microphone cutouts, super slippery and the finish on the face of the skin where you see it almost all the time has an orange peel look to it, almost like a ZAGG screen protector. However, the sparkles on the back really made me want to play some funky music!
Click to expand...
Click to collapse
I would be tempted to request another one, mine is an absolute perfect fit with all the cut outs being in the correct places. Regarding its slippyness after a couple of days use it starts to get more grippy.
Out of the 4 cases i have bought for the Nexus 4 this is the only one i have kept lol
The Rinke Slim i had was the worst of the lot, made my phone really slippy and offered zero protection.
Honestly I'm surprised there aren't more people using/reviewing the Acase Superleggera pro. I've tried a hatful of cases and by far the Acase is perfect for me. The only complaint that people have for it is that it's bulky, but for me that's a pro. I want my pocket to feel slightly heavy (like 40 grams more than the phone?) to know that my phone is still there, and then I can avoid those mini heart attacks that you get when you think you've lost your phone.
The protection is the best out there,it looks great, isn't slippery at all, feels premium in your hand, button feedback is excellent, not too much of a fingerprint magnet and doesn't interfere with my screen protector.
The only downside is that the back isn't transparent but you get over that initial fascination of showing off the back soon anyway.
I like the Acase pretty well. The amount of lint that it picks up bothers me more than anything. I think it would be nice if the inner case was a light - medium grey, so the lint is less apparent. I have the Mercury, Superleggera, Ringke Slim, and Poetic bumper. I change them out all of the time because I'm not completely satisfied with any of them.
Sent from my Nexus 4
since you have protection on the back and you are using the Rinke slim which is made to fit precisely, do you feel like it is adding too much pressure to the phone? I have a feeling that may have happened to mine and when i squeeze the top part of my phone it creaks. I'm not sure if this was the cause, but if yours has zero creaks then I will assume it is safe to have the skin on the back along with the case.
Mohit12 said:
Honestly I'm surprised there aren't more people using/reviewing the Acase Superleggera pro. I've tried a hatful of cases and by far the Acase is perfect for me. The only complaint that people have for it is that it's bulky, but for me that's a pro. I want my pocket to feel slightly heavy (like 40 grams more than the phone?) to know that my phone is still there, and then I can avoid those mini heart attacks that you get when you think you've lost your phone.
The protection is the best out there,it looks great, isn't slippery at all, feels premium in your hand, button feedback is excellent, not too much of a fingerprint magnet and doesn't interfere with my screen protector.
The only downside is that the back isn't transparent but you get over that initial fascination of showing off the back soon anyway.
Click to expand...
Click to collapse
I ordered one of these yesterday after reading many reviews. Looks like the best bang for the buck and some decent drop protection, which many of the other cases don't have. I also like the fact that the measurements have it only slightly more bulky than the Diztronics case I have, so it will fit in my leather holster perfectly.
Bumper
Tempist305 said:
Okay guys I'll start this off by saying that I am not impressed with the current case selection for this phone. Now, let's begin with the review.
1.The first case I'll start with will be my Rearth Ringke Fusion hybrid case. I loved this case to death when I first received it on the same day I got my phone, and it has been my favorite case since I got my new one (more on that in a minute ). It feels great in the hand, as it's completely ergonomically similar to the phone itself, and the button feedback is a dream. The clear plastic back has much to be desired, however. The plastic smudges, smears and attracts fingerprints like no other. It also is slippery. VERY slippery. Keep in mind that I have hands that are almost always moist in some form or fashion, so the back plastic of this thing felt like butter. All in all, a very good case and I highly recommend it, except for those with moist hands!
2. Next is my replica Google official bumper. (Replica is perfectly identical to the actual one.) I bought this bumper in conjunction with a carbon fiber dbrand skin, (I still have that on, props to dbrand for making the best skin in the world!) and I was honestly a little disappointed. The stippled texture that bands the sides and sandwiches the fake aluminum plastic piece together feels amazing in the hand. My moist sweaty hands had no problems gripping this bumper, except for the fake aluminum plastic piece that I just mentioned. It's not totally matte, but it's not totally glossy either, it's an odd mixture that feels great to touch, but for me it was a tad slick. It wasn't nearly as bad as the Ringke Fusion case but it was enough for me to take it off sometimes. The buttons clicked with pride and although it did add quite a bit of width to the phone, it had an awesome fitment, no flex or peeling of materials found on this bumper! I would still definitely recommend this case despite the negatives.
3. The other day, (Friday), I received my Mercury TPU case (black), and boy let me tell you something. My hands promptly said NOPE right when I got it on the phone. For some reason I must've been on some crazy drug and bought the thing thinking that it would be some grippy, sticky rubber case. WRONG. All I'm going to say on this one is, misaligned speaker and microphone cutouts, super slippery and the finish on the face of the skin where you see it almost all the time has an orange peel look to it, almost like a ZAGG screen protector. However, the sparkles on the back really made me want to play some funky music!
4. Today, (about 15 minutes before I wrote this), I got my Ringke Slim case in the mail. One complaint: I got an older version, the one with the loose volume slot, but it's not a big deal as I can't really hear any creaking. Other than that minor mishap, for the fifteen minutes I've been using this thin case, and it is EXTREMELY thin, I'm proud to say that this is my favorite case thus far. The matte finish has a soft-touch coating on it that feels like heaven, the button cutouts and speaker, mic cutouts are spot on and without flaws. Most people don't notice it, but this case actually has four little feet on the screen side on the case that allows you to set the phone on it's face and not get the screen scratched. Nice!
The complete lack of top coverage is nice FOR ME because I can finally put my ATH-M50's in my phone without having to remove the case! :good:
Keep in mind that the Slim is a totally different case than the other three, most similar to the bumper however.
Here are links to each of the cases on their respective websites, (if such site exists).
1. http://www.rearthusa.com/google-nexus-4-hybrid-fusion-case
2. https://play.google.com/store/devices/details/Nexus_4_Bumper_Black?id=nexus_4_bumper_black&feature=accessories#?t=W251bGwsMSwyLDExMSwiZGV2aWNlLW5leHVzXzRfYnVtcGVyX2JsYWNrIl0.
3. http://www.amazon.com/Mercury-Flexible-Google-Nexus-Black/dp/B00AOW8ICQ/ref=sr_1_1?ie=UTF8&qid=1369864701&sr=8-1&keywords=nexus+4+mercury
4. http://www.rearthusa.com/google-nexus-4-ringke-slim-case
Click to expand...
Click to collapse
I bought a Minisuit (transparent) for protection when going camping, beach, or a very wet day. And I also bought the Poetic bumper. The minisuit is great, the only problem is that the power button sometimes is hard to press. With the Poetic I had problems with the first unit they send me, it broke in a week. I called poetic and they replaced the bumper with (2) new ones, they told me that they had problems with the first batch they ordered, but they assured me that the new one was perfect, today it's been 4 months since I'm using the Poetic and I can say is been great, no pealing, no plastic coming off, and I still have a replacement new one just in case.
I got a white color of ringke slim case. the material is too slippery. never like it. plus the corners feel really sharp by touching it it may scratch my N4.
I ordered Incipio feather case. It may not be slim as ringke but it feels really good.
Last year for the Note 8 and even the S8 and S9, Samsung released cases that they called, "Clear Covers." They were hard plastic cases that gave a really snug fit, kept the slim profile, and added grip. It isn't meant for drop protection but does provide some (I dropped my Note 8 on marble and the case corner cracked but phone was fine).
Samsung didn't make them this year for the Note 9 but I found a generic one online. Ordered 10+ clear cases to try to find one that was similar to the OEM Clear Cover and was able to find one.
You can see in the video how I have the phone vertically and it is still stuck to my fingers and doesn't slip.
https://www.youtube.com/watch?v=sjRea7mmBYs
I get a bit apprehensive with clear cases because I worry about them yellowing after a while. As far as trying to get something reliable but very thin, Spigen has always been my choice. These two options are pretty thin. What I really like about Spigen is they give you a healthy amount of lip across the top and bottom face so you can lie down the phone face down without any worry. The other great thing about them is the buttons (for the cases that wrap all the war around the edges) are very CLICKY. I have using a case with mushy buttons.
Anyway, that's my two cents on it.
https://www.amazon.com/Spigen-Liquid-Galaxy-Durable-Samsung/dp/B07FLZJ57M
https://www.amazon.com/Spigen-Galaxy-Durable-Profile-Samsung/dp/B07FN5WJVT
I've been using Mnml case https://mnmlcase.com/products/samsung-galaxy-note-9-mnml-case
And anccer https://www.amazon.com/Galaxy-Note-...ds=anccer+note+9&dpPl=1&dpID=31+QUAn2cBL&ref=