Database Info

[HELP NEEDED] Camera2 Api cannot be enabled in my Redmi Note 6 Pro.

Hello everyone!
My problem is I cannot enable Camera2 Api on my Redmi note 6 Pro in any method I've tried so far. (I didn't try rooting and editing the build prop cuz I don't want to root my device yet.) I'm not an expert in these cases guys but I watched and read many tutorials about this and tried almost all methods but the camera2 api is still not enabled for my device for some reason.
*Yes! my bootloader is unlocked!
*Yes! I have set up all the usb drivers and adb on my PC!
*No! I haven't installed any custom recovery permanently!
Firstly I tried enabling it by adb using the following commands (While TWRP image is booted);
adb shell
setprop persist.vendor.camera.HAL3.enabled 1
this didn't give me any error but after I restarted the phone and checked, Camera2 Api wasn't enabled.
Then I tried to flash a zip file to enable it. I've tried many different zip files but none worked. ( I copied the zip files to my SD card and selected them from there because when I temporarily booted into TWRP, it didn't recognize any file in my internal storage. It just showed my internal storage is 0MB! then I mounted my SD card then TWRP recognized the zip files in there.) First I flashed a "Disable DM Verity Force Encrypt" zip and it gave me "Successful!". Then I tried to flash the "Camera2 Api" zip but it gave me "Failed!". I tried 5-6 different zips from the Internet (meant for my device) but every one of them gave an error.
So..yup..that's my problem. I really really want to install G Cam on my device but I can't understand where is the error. Everyone seems to success with this process but for some reason it doesn't work for me. I'm afraid to do anything which breaks OTA updates either. I don't know this area a lot so any help on this means a lot to me. Sorry for the long post guys. Thanks a lot in advance!
Have a nice day everyone!
(P.S. - Please find the attached images for more info. Thanks!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

thats my idea:
last month i try like that...first write hal3=1 to the buildprop.than restart..
than disable again (hal3=0).restart..
finally enable again hal3=1 than restart..its worked for me like that.Interested solution ... some users (mi 8 lite) tryed my solution but didn't work.Someones tryed magisk module 2-3 times than worked no any issue

[email protected] said:
thats my idea:
last month i try like that...first write hal3=1 to the buildprop.than restart..
than disable again (hal3=0).restart..
finally enable again hal3=1 than restart..its worked for me like that.Interested solution ... some users (mi 8 lite) tryed my solution but didn't work.Someones tryed magisk module 2-3 times than worked no any issue
Click to expand...
Click to collapse
Thanks for the reply!
I haven't rooted my phone yet so I'm unable to try this solution at the moment friend since I can't edit the build.prop. But if there aren't any other solution I will definitely root my device and try this!
Thanks again for your concern!

Charith Lekamge said:
Thanks for the reply!
I haven't rooted my phone yet so I'm unable to try this solution at the moment friend since I can't edit the build.prop. But if there aren't any other solution I will definitely root my device and try this!
Thanks again for your concern!
Click to expand...
Click to collapse
try with root solution.(with magisk). You can unistall it. buildprop solution better than others.

[email protected] said:
try with root solution.(with magisk). You can unistall it. buildprop solution better than others.
Click to expand...
Click to collapse
Hello again!
I tried editing build.prop my friend and it worked!! Just as you said I firstly set the prop value to 0 and restart and then again set it to 1 and restart and it worked magically! Thank you so much for your help friend!

you are welcome

[email protected] said:
you are welcome
Click to expand...
Click to collapse
Hello there can you help me eneble the camera2api on miui V10.3.3.0

Rei Shu said:
Hello there can you help me eneble the camera2api on miui V10.3.3.0
Click to expand...
Click to collapse
its easy.if ur bootloader unlocked:first install twrp on ur device.than install magisk apk on your system or install with twrp(flash zip).Than install buildprop app on the app store.Open app.Than search hal3=0 word on the buildprop app. thats it
You can install magisk app on the apk like this.install magisk app-open app-than click download zip.You can install that zip on the twrp interface or search on the google (magisk.zip)

[email protected] said:
its easy.if ur bootloader unlocked:first install twrp on ur device.than install magisk apk on your system or install with twrp(flash zip).Than install buildprop app on the app store.Open app.Than search hal3=0 word on the buildprop app. thats it
You can install magisk app on the apk like this.install magisk app-open app-than click download zip.You can install that zip on the twrp interface or search on the google (magisk.zip)
Click to expand...
Click to collapse
It was my first time unlokcing my phone and installing twrp etc. Last phone which I was rooting swtiching to roms was the legendary HTC HD2.
I did what you explain to this person I swtich hal3=1 to 0 and than again to 1 and it worked

Rei Shu said:
It was my first time unlokcing my phone and installing twrp etc. Last phone which I was rooting swtiching to roms was the legendary HTC HD2.
I did what you explain to this person I swtich hal3=1 to 0 and than again to 1 and it worked
Click to expand...
Click to collapse
last xiaomi update was **** dude.hal3=1 but nothing works on gcam.my solution works every redmi note 6 phone without no problem.
but you r trying first time.You can install gcam without any problem while hal3=1

[email protected] said:
last xiaomi update was **** dude.hal3=1 but nothing works on gcam.my solution works every redmi note 6 phone without no problem.
but you r trying first time.You can install gcam without any problem while hal3=1
Click to expand...
Click to collapse
Xiaomi could make this device run a lot more smoother.. still the full screen gestures are lagging kinda :/ I was planning on installing some rom but from what im reading all of them are full of bugs etc.
Btw what version of Gcam you using I found some version where night mode works on front camera and the back camera without any problem but when HDR is off its not taking pictures until i turn it on :/

Rei Shu said:
Xiaomi could make this device run a lot more smoother.. still the full screen gestures are lagging kinda :/ I was planning on installing some rom but from what im reading all of them are full of bugs etc.
Btw what version of Gcam you using I found some version where night mode works on front camera and the back camera without any problem but when HDR is off its not taking pictures until i turn it on :/
Click to expand...
Click to collapse
MGC_6.2.024_BSG_Arnova-based_v.0.2_TlnNeun.apk
im using this version without any problem.night sight and hdr works good.

Dolby Atmos™ for OOS - Closed

Due to complaints that the addon does not work, I have now removed it from the forum.
Unfortunately, I can not understand that it does not run, because I had no problems on two devices.
If someone still wants to test or has questions he can send me a PN.
The topic may be closed.
With kind regards
Ramme
Spoiler: Old Guide
Use on your own risk.
Hello everyone, I found a post on the OnePlus8Pro forum about Dolby Atmos.
There sirioo posted a Magisk file which adds the full Dolby Atmos to the system. (Made for the OP8Pro!)(Thanks for this!).
I tested this on my OnePlus 8T and found that Dolby Atmos works fine.
For those who would also like to have the full program, I now share my experience.
Instructions: (Root(Magisk) required + Audio Modification Library + USB debugging enabled) !!!
Step 1: Download "SDK Platform Tools", unpack it. Go to the folder and type "CMD" in the top bar. Now your console will open.
Step 2: Make sure that your phone has USB debugging enabled and allowed to the computer (can be enabled in the developer options). Now type the following command: (The Phone must stay ON during the process!)
adb shell pm uninstall --user 0 com.oneplus.sound.tuner
#This removes the Dolby Atmos tuner present on your device.#
Info: After the command (Step:2) you can check in the Settings>Sound&Vibration>> under "Sound effects and modes", there should be now the Dolby-setting disappeared.
Step 2.1: Restart your Phone.
Step 3: Now Download "DolbyAtmosOOS" and put it on your device. (or download the file from my attachment.) Now open Magisk and load the file from your storage and restart your device. Voilà Dolby Atmos can now be enjoyed to the fullest.
How do I get back to the default? > Uninstall the Magisk addon, restart your device.
Tested on OP8T - OOS 11.0.7.10.KB05BA (EU) - 03.20.2021
Tested on OP8T - OOS 11.0.8.12.KB05BA (EU) - 04.11.2021
A little video from me to show that Dolby works under OOS 11.0.8.12.KB05BA !
Pros of DolbyAtmos Full?
More and more detailed setting options than with the system's own.
Spoiler: Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit: 04.11.2021
In the meantime changed my ROM back and forth a few times. (for testing purposes on my part), I repeated today (04.11.2021) the installation of DolbyAtmos according to my instructions and it worked successfully. I am currently on OP8T OOS 11.0.8.12.KB05BA (Model: KB2003)
To the ones who say it doesn't work, I can only say that you not exactly following the instructions or you are on a custom rom.

Uforuently mine did not flash and said failed in Magisk.
OnePlus 7T Pro 5G Running AOSIP

Dopewaffles said:
Uforuently mine did not flash and said failed in Magisk.
OnePlus 7T Pro 5G Running AOSIP
Click to expand...
Click to collapse
think it's because you're running AOISP?

Is this working together with V4a?

vibrantliker said:
think it's because you're running AOISP?
Click to expand...
Click to collapse
Could very well be.either way it screwed it up :/

My instructions are only for the Official OOS, to all other custom roms I can not say anything, the 8Pro forum which I linked above in the text is only for information where I got the Magisk file.
I have performed the procedure according to my instructions on two OnePlus8T, on both devices DolbyAtmos works successfully.
For custom roms based on OOS-vendor, there is also an alternative here in the forum.
@vibrantliker
Yes, it runs together with Viper4Android.

Dopewaffles said:
Could very well be.either way it screwed it up :/
Click to expand...
Click to collapse
did it brick your phone or just not flash in Magisk?

vibrantliker said:
did it brick your phone or just not flash in Magisk?
Click to expand...
Click to collapse
So I installed it and everything was just fine. After finding out it did not work (kept crashing) I decided to remove it from Magisk and then when my phone rebooted it got stuck in a bootloop. Eventually I dirty flashed my ROM back and got everything going again after doing more tweeks, but that was the extent of that.

But 8T already has Dolby Atmos. Am I missing something here?

Unfortunately I can't install this on OOS11. Anyone with the same problem?

Adityaveer Rathee said:
But 8T already has Dolby Atmos. Am I missing something here?
Click to expand...
Click to collapse
Whether you miss something I can not answer, but I can tell you that they do not have the same level of accuracy (setting options) in the official DolbyAtmos.
HubertGT said:
Unfortunately I can't install this on OOS11. Anyone with the same problem?
Click to expand...
Click to collapse
Did you follow my steps exactly?
Unfortunately, I did not create the package myself and cannot provide any support in this regard.

i did all of these steps and it installed but there is no problem i dont think it works correctly. when i disable dolby i didnt notice any difference (7T Pro OOS 11 , Stable)

This app has been reported multiple times as NOT working. I don't suggest anyone download it.

Dopewaffles said:
This app has been reported multiple times as NOT working. I don't suggest anyone download it.
Click to expand...
Click to collapse
Yep, can confirm.
The app is not working as it should. Don't install it.

Dopewaffles said:
This app has been reported multiple times as NOT working. I don't suggest anyone download it.
Click to expand...
Click to collapse
epr said:
Yep, can confirm.
The app is not working as it should. Don't install it.
Click to expand...
Click to collapse
If you could at least tell me how the app doesn't work, I could at least help.
Since all I hear is that it doesn't work, I can't do anything.
The next question would be to clarify what kind of smartphone you use? What version of OOS are you on?
I have so far only read out that it does not work on a 7tpro and on a custom rom, but from OOS I have heard nothing?
*
Attached I have just made the trouble to create a small video, which shows that Dolby works.
I mention again that I did not create the Magisk Dolby file, but only found out that it works with the OnePlus8T on OOS!

Ramme said:
If you could at least tell me how the app doesn't work, I could at least help.
Since all I hear is that it doesn't work, I can't do anything.
The next question would be to clarify what kind of smartphone you use? What version of OOS are you on?
I have so far only read out that it does not work on a 7tpro and on a custom rom, but from OOS I have heard nothing?
*
Attached I have just made the trouble to create a small video, which shows that Dolby works.
I mention again that I did not create the Magisk Dolby file, but only found out that it works with the OnePlus8T on OOS!
Click to expand...
Click to collapse
I am using KB2003, OOS 11.0.8.12 KB05BA
Yes, it looks like it's working. I can move the sliders and set the different modes BUT no matter what I do, it makes absolutely no difference to the sound. And the volume controls are no longer working, volume keeps at one fixed level, the sliders are moving but nothing happens. Demo mode is also not working.
Besides this I don't see any advantages against the built-in Dolby Atmos except the equalizer which is also not very useful because there is no option to save the settings as a preset.

Mine is working on H2OS system, thank you.

epr said:
I am using KB2003, OOS 11.0.8.12 KB05BA
Yes, it looks like it's working. I can move the sliders and set the different modes BUT no matter what I do, it makes absolutely no difference to the sound. And the volume controls are no longer working, volume keeps at one fixed level, the sliders are moving but nothing happens. Demo mode is also not working.
Besides this I don't see any advantages against the built-in Dolby Atmos except the equalizer which is also not very useful because there is no option to save the settings as a preset.
Click to expand...
Click to collapse
Yep, you are right, I installed it successfully and it was not working when I changed the configurations, and after I put it into background application and it was stuck.

Edited

not working on oos 11 8t

[ROM] [Unofficial] [11] RevengeOS 4.0 Stable

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RevengeOS is an operating system based on Android Open Source Project, built with a unique look and performance in mind. It's daily usage ready, lightweight and elegant.​
FEATURES
RevengeOS exclusive features:
- Battery health checker
- Brand new RevengeUI, built to be different, built to be elegant (Best when i can get Official)
- Brand new media controller
- Systemwide gradients
- New lock screen clock styles
General features:
- In call haptic-feedback
- Kill app button
- Toggle battery percentage in status bar
- Resume media from Quick Settings
- Playback control from volume buttons
- Wake up with volume buttons
- Quick camera launch from sleep
- 3-button navigation system
- Pill navigation system
- Swipe to screenshot
- Wake on charge
- Proximity sensor check when waking up
- Systemwide sensor block
- And so much more!
DOWNLOADS
SourceForge
INSTALLATION
1. Flash ofox_universal.img through qfil on boot_a & boot_b OR fastboot boot <drag and drop ofox_universal.img over the cmd>
2. Format Data ( Go to Trash Icon in ofox -—> format data —-> type yes )
3 .Flash the rom using adb sideload ( go to 3 lines in the bottom right corner and select adb sideload then swipe, now you go in adb tools open the cmd and type adb sideload < drag and drop the zip over the cmd> )
4. Flash ofox zip the same way through adb sideload, it will automatically reboot to ofox after flashing done
- Optional: flash NikGApps (Basic recommended)
- Reboot
- Optional: flash Magisk (if you want to root your device as well) (it's recommended to flash Magisk post first boot)
Telegram Support
Important
Hi guys, we're posting this message today to talk about RevengeOS. We want to talk about the developers of our project.
There are just three developers that hard-worked every day for you, to deliver optimization, exclusive RevengeUI, media controller, etc. We want to make this project more and more exclusive, and we want to improve everything. And lastly, we want their users to be happy while using it. But there is a problem, three developers can't do much. So, we're here to ask if you - if you're a developer, and if you want to join us, you may do so. We have the following requirements:
Knowledge of Android and Java
Desire to be innovative
Be mad
Think you're good enough? Contact us via email!
Email: [email protected]

Thanks for the rom but can make calls but can't hear nothing on the receiver or phone speaker. Does it require certain firmware for this rom? I'm using ULM converted to N 30g.

sinkoo1979 said:
Thanks for the rom but can make calls but can't hear nothing on the receiver or phone speaker. Does it require certain firmware for this rom? I'm using ULM converted to N 30g.
Click to expand...
Click to collapse
Based on DotOS trees, I would say the recommended firmware is 30f, anyway i'll see if is a recurrent problem and try to fix, thanks man

sinkoo1979 said:
Thanks for the rom but can make calls but can't hear nothing on the receiver or phone speaker. Does it require certain firmware for this rom? I'm using ULM converted to N 30g.
Click to expand...
Click to collapse
Bro HOW TO CONVERRT ULM TO N?

AbboSSoft said:
Bro HOW TO CONVERRT ULM TO N?
Click to expand...
Click to collapse
follow this guide https://forum.xda-developers.com/t/...g7-g7-dual-sim-thinq-except-t-mobile.3915303/

this ROM is very good on games, but the phone signal is suddenly lost, and comes back after hours.
i use the canadian 30d rom.

Google Pay works without Magisk?

Astur13 said:
Google Pay works without Magisk?
Click to expand...
Click to collapse
it wont

Shykan003 said:
this ROM is very good on games, but the phone signal is suddenly lost, and comes back after hours.
i use the canadian 30d rom.
Click to expand...
Click to collapse
did you use airplane mode ? if yes then its a visual bug what's happening with signal, in fact you do have signal. if its not that then maybe try another firmware, check dotos thread for the recommended firmwares.

EmanuelCN said:
it wont
Click to expand...
Click to collapse
Thanks! I supposed it. I used to use Magisk long time ago but at present, does it fails often when SafetyNet update? When happens, does it take too much time until Magisk fix it? It is crucial for me knowing about this, thanks you a lot. Excuse me the off topic

Astur13 said:
Thanks! I supposed it. I used to use Magisk long time ago but at present, does it fails often when SafetyNet update? When happens, does it take too much time until Magisk fix it? It is crucial for me knowing about this, thanks you a lot. Excuse me the off topic
Click to expand...
Click to collapse
Enable magisk hide in magisk settings and its fixed. Also do not use magisk to check for safetynet use Safetynet Evaluation on playstore. Magisk's checker is broken it will show not passing no matter what, which is because the checker itself its broken not safetynet.

Hi. I built CherishOS using the same dotOS device tree, but I had mobile data not working issue. Do you have any idea?

Sorry that i have few knowlege...
The question is: How can I extract boot.img?
For now I am struggling installing magisk. I was warned by xda gudiance that the method of magisk in recovery is abandoned, and the method of re-package boot.img is recommended. Is it same with official stock? or should I use recovery.img instead?
Sorry I am not good as English as well, and sincerely thanks for your efforts!

I need a new rom. Can anyone give advice?

USB Tethering working ?

i think this is the best rom for our lg. thank you for you work

Development [CLOSED][ROM][OFFICIAL] AOSPK - The Kraken Project [Android 11][vayu/bhima]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Project Proposals
Based on AOSP with improvements from many other projects! GApps included! The proposal is to provide the best experience in using a pure Android with only basic customizations. Focused on battery stability and fluidity.
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Lights
Sound/vibration
Known issues
You tell me
D O W N L O A D
Install Instructions:​
​First time installation / from MIUI:
Remove any fingerprint, PIN, or password in MIUI.​
Unlock the bootloader.​
Transfer ROM to internal storage or SD Card.​
Flash latest TWRP.​
Flash ROM zip file + (Optional) Gapps + (Optional) Magisk.​
Format Data > type "yes" and press enter. (different from the "wipe data" option)
Reboot to system.
Flashing Instructions from any custom ROM:
Backup all your data.​
Boot/reboot to latest TWRP.​
Flash recommended MIUI stock ROM (12.5.X.X). You can find them here. If you're already on it, you can skip this step.​
Flash ROM zip file + (Optional) Gapps + (Optional) Magisk.​
Format Data > type "yes" and press enter. (different from the "wipe data" option)​
Reboot to system.​
Source code: https://github.com/AOSPK
Kernel Source: https://github.com/kleidione/kernel_xiaomi_vayu
ROM Developer: kleidione

08/08/2021
Changelog
August Security Patch
Requires MIUI 12.5 firmware (any region)
These builds include custom vendor
Update blobs from V12.5.3.0.RJUINXM
Address denials and cleanup unneeded policies
Fix crackling sound on some loud ringtones
Address slow charging text issue, now it should show rapid charging with stock charger
Further debloat power and camera drivers in kernel
Fix screen selection issue on touching fp sensor
Misc changes and improvements
Thanks @kubersharma for tree and kernel

Reserved

Anyone tried it?

0b4 said:
Anyone tried it?
Click to expand...
Click to collapse
Yep.

DarthJabba9 said:
Yep.
Click to expand...
Click to collapse
Well, can you share your thoughts and experiences pls?

0b4 said:
Well, can you share your thoughts and experiences pls?
Click to expand...
Click to collapse
I only used it for a about an hour (while flashing a zillion ROMs to see what they look and feel like). It was as good as any other (ie, no obvious issue or problem, during the short period that I had it).
However, I must have been very impressed by it, because I made a backup of it (I didn't make a backup of any other, save the stock MIUI).

Dude, the custom ROM is freaking awesome, the best battery life i have seen so far, buttery smooth, and it is the smoothest ROM I have tried for games, I have tried Conquer OS, Arrow OS, Paranoid OS, Evolution X, Havoc, Android 12 beta 4 and 3, Corvus and PixelPlusUI, but AOSPK is the best of all.
Thanks for this great ROM mate.

Forgive my ignorance. Is it necessary or a good idea to unlock (Mi unlock) the device first? I just got my device this morning. First device not running Android One in my case. Appreciate your help.

madfade35 said:
Forgive my ignorance. Is it necessary or a good idea to unlock (Mi unlock) the device first? I just got my device this morning. First device not running Android One in my case. Appreciate your help.
Click to expand...
Click to collapse
Necessary for non-official adjustments.
Read my guide for informations:
https://forum.xda-developers.com/t/4288121/

pl1992aw said:
Necessary for non-official adjustments.
Read my guide for informations:
https://forum.xda-developers.com/t/4288121/
Click to expand...
Click to collapse
Thanks the help. Are wait times always a week? Seems completely arbitrary to me. Guess I'll have to debloat for now and use the phone.

madfade35 said:
Thanks the help. Are wait times always a week? Seems completely arbitrary to me. Guess I'll have to debloat for now and use the phone.
Click to expand...
Click to collapse
Always, once you unlocked bootloader follow the guide https://forum.xda-developers.com/t/...-custom-roms-root-xiaomi-poco-x3-pro.4288121/

k3lcior said:
Always, once you unlocked bootloader follow the guide https://forum.xda-developers.com/t/...-custom-roms-root-xiaomi-poco-x3-pro.4288121/
Click to expand...
Click to collapse
Thanks! Going to start the debloat process now and then wait for the timer to run down.

thanks for this great rom, working flawlessly so far!
i have a question about something that happened during flash. The same red colored messaged showed up on the screen saying something similar to "unable to mount cache" or something like that. Should i reflash the rom or is there no problem?
edit: fixed by wiping cache through twrp
another question tho. is there a way to auto accept pin code when unlocking screen? there's nothing in screen lock options. miui had this and i'm finding this to be very annoying

emaz1ng said:
another question tho. is there a way to auto accept pin code when unlocking screen? there's nothing in screen lock options. miui had this and i'm finding this to be very annoying
Click to expand...
Click to collapse
That's actually a convenience feature of Miui, but since i'm using fingerprint so there's no need for auto log in anyway.
Btw does anyone knows a way to access Android/data? My favourite app to manage files is X-plore and new AOSP roms seems to restricted this app from accessing Android/data. Miui don't have this problem.
I already know many apps that can do that like Root Explorer but i kinda wanna stick with X-plore.
Also i'd love it if you could get rid of the restriction in the first place.

Interesting, will follow this project too since it have vanilla. Is possible to have a list of system apps installed in the vanilla version? It have the two tap to wake up issue too? SD card work or i'm forced to format it to be recognized?
I'm on vanilla ArrowOS atm, need really to install MIUI stock before flash it or i can simply flash over ArrowOS and then format data? Just wondering if is mandatory the MIUI and TWRP installation (since MIUI will overwrite TWRP with stock revovery). Thank you mate for your work.

Timuela said:
Btw does anyone knows a way to access Android/data?
Click to expand...
Click to collapse
Check permissions for X-plore. I added "files & media" manually. I'm not sure if this is enough, since I already granted access to data/ folder and X-plore can browse without this permission.

Hello,i am experiencing laggy scrolling in the play store and in chrome,and sometimes in the settings menu and in the ui in general,i ve not tweaked anything besides installing magisk,also tried 2 other roms and did not have this problem,battery life is the best on this one,but the scrolling issue is a big annoying,it feels like its not hardware accelerated,any way i can enable smooth scrolling myself or something like that?

type c otg telling me to format the device
Between it's working on the TWRP and others phone

Download link is dead "download.aospk.org/vayu"

How To Guide How to enable Motion Mode (Action Pan and Long Exposure in Gcam) on your Pixel 6a

Hi to all my fellow Pixel 6a users. As you know, Google thing is to develop awesome tools and then to only allow a handful of people to use them. But I don't like that, so here's a way to enable Motion Mode, i.e. Action Pan and Long Exposure, and also Audio Zoom on your Pixel 6a. It's pretty simple but I couldn't find any guides online.
Requirements :
- Magisk
- the MagiskHide Props Config module
- a terminal emulator app, Termux is great
Steps :
- Flash the module in Magisk Manager and reboot
- Open your terminal, type "su" and then "props"
- First, change device fingerprint to Pixel 6 : type successively "1", "f", "7", "28" and finally "y". Reboot.
- Once your device restarted, go back to your terminal, type "su" and then "props". Type "3" to go to Device Simulation, and then "2,3,5,10". Nothing else, else your phone may bootloop !
- Reboot and enjoy !
You may need to delete Gcam data.
I did this on my Pixel one week ago and everything still work for me (wide angle, slow motion, safety net...). You still may need to disable everything before updating your phone.
Edit :
As pointed out by sebasgc, the custom Gcam by BigKaka enables Motion Mode on all devices (tried with AGC 8.4.300.18_V_9.3).

It doesn't work for me. I do not see motion mode in the application after applying the modification. Are you using the latest official camera app for this?

That's strange, it works with the lastest stable of the play store on my pixel.
Is "Device simulation" enabled in MagiskHide Props Config ?
Did you try rebooting and erasing Gcam data ?

Yes, I tried rebooting and wipe gcam app data. It's my settings in module
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Followed your guide, and got it working really easily! Thanks a lot!

I tried this guide again and it started work for me. Idk where I made mistake before. Thank you!

@Papipoulpe Hi, thank you for the work but is not working for me, I made a video.
I'm on build TP1A.221105.002, MVK Kernel, Magisk 25.2, MargiskHide Props Config v6.1.2-v137
EDIT: With stock kernel now working

charly30 said:
@Papipoulpe Hi, thank you for the work but is not working for me, I made a video.
I'm on build TP1A.221105.002, MVK Kernel, Magisk 25.2, MargiskHide Props Config v6.1.2-v137
video
Click to expand...
Click to collapse
It is possible that it is the MVK kernel that is causing the tutorial to not work. The first time (with MVK kernel) it didn't work for me, I made a second attempt already with stock kernel and the tutorial started working. However, this is only my theory. Someone would have to confirm if it works for them on the MVK kernel

Nice, worked for me on the latest beta! Thx

Will this prevent you from taking OTA updates, or will there be other negative side effects from having a Pixel 6 fingerprint on your 6a?

Wont work for me, im on latest december update

Madseb said:
Wont work for me, im on latest december update
Click to expand...
Click to collapse
for me works

charly30 said:
for me works
Click to expand...
Click to collapse
After last step where you have to put the "2,3,5,10"... I got a new window where you have to select 1 for enable, 2 dissable, 3 exit i select enable and the reboot im doing thia correctly?

What option do i have to choose after this i put enable and wont work

Yep, not working for me also on Dec update. Could anyone who got it working share this screen shot?

Madseb said:
Wont work for me, im on latest december update
Click to expand...
Click to collapse
i finally got it working. all i did was add an extra step. but before redoing all those steps, i did reset the props and gcam data once.
Once your device restarted, go back to your terminal, type "su" and then "props". Type "3" to go to Device Simulation, and then "2,3,5,10". Nothing else, else your phone may bootloop !
Click to expand...
Click to collapse
before this step, on the terminal, need to enable the emulation first, which is "s" and enter. and after this just follow the step on the terminal and reboot. open camera apps, and there is motion mode. yay

koax88 said:
i finally got it working. all i did was add an extra step. but before redoing all those steps, i did reset the props and gcam data once.
before this step, on the terminal, need to enable the emulation first, which is "s" and enter. and after this just follow the step on the terminal and reboot. open camera apps, and there is motion mode. yay
Click to expand...
Click to collapse
Now is working, thanks mate!

sadly, i found a bug, potrait mode, at 1x is not working. 2x and front face is working. and i did noticed the processing took a bit longger than usual.
edited : well,potrait mode is still working at 1.1x , not much different, i can live with it.

Hi,
Can you please share a screenshot of the stock Gcam app where this option (Motion Mode) appears?
Is it the same things as "Cinematic Pan" ??
UPDATE: I got it working now, it is a different option that appears below the shutter button! Thanks for sharing!!

You can install BigKaka's gcam too, i got it working on that way.