Hi!
I tried to bypass frp of MatePad 11 Huawei but i canno't because devices was blocked by owner, after i tried lots of things with adb ... Fastboot.. Tool... But that doesn't worked , i was despair, well i looked background of pad but at one time, a chinese voice appears ( very brutal). I was scared but i looked screen and its was pogram for kids with multiples applications ( all chinese ) (like i was entering into bios) The voices was very high well i tried to reboot pad asap because i was scared and reboot successfully. When program with multiples applications appears with chinese voice assistant it was after hard reset ( moment when i was lock ) . But i dont touch buttons of device just looked surface. Its was strange, if someone have explications Thanks in advance !View attachment 5719235 Its screen before something look like bios appears with high chinese voices (not me on pic')
Related
First of, I have a problem getting into the bootloader as I've said in my post: forum . xda-developers . com / showthread.php?t=759279
I've been using Kostas244's ROM -> www . forum . xda-developers . com / showthread.php?t=554071 for a few months now, no problems until now.
What happened: The touchscreen began to not respond to my input, slowly and gradually for a few days. I clicked on a few things, something else was triggered. So I figured I only had to reboot the phone. Now I can't get even use my phone.
My phone activies: Calls, SMS, Alarm, Play Solitaire, Taking Photos. That's about it. Nothing else.
Now I can't seem to enter the bootloader (Camera Hold + Power) during startup, can't get into the system cause the slider reacts just once and then it hungs up. Freezes for a while, then after I shut down the screen and turn it on again it simply does not respond at all.
First time I could enter my security code, but then I couldn't enter my PIN code so I took out my SIM CARD - then I couldn't enter my security code and nothing seems to be working.
Right now my phone ask me to enter a code due to "several bad atempts to get into the phone" and I could only press q (whatever I would input, it simply gave me a q and then nothing) and that doesn't do me any good.
Just a few minutes ago I tried forum . xda-developers . com / showthread.php?t=636170&highlight=bricked+my+cruise&page=2 on the thread ( forum xda-developers com / showthread.php?t=636170&highlight=bricked+my+cruise&page=2 ) who seemed to have a similiar problem as mine - the touchscreen isn't working.
But I don't have Windows XP (if that's the case it's not working) and the guides seems to point that it has to be in RGB mode (bootloader) and that is not working either.
Does anyone have any ideas or solutions I could try? This just happened out of the blue, I hadn't done anything with the phone for a whole day and it just began acting like this. No damage to the phone has been made or anything out of the ordinary. So it sounds like a software problem, but I can't seem to get past it.
I use Linux 64 and Windows 7 64 if there's solution to connect to the device on either Operating Systems.
Thanks anyway.
To enter the bootloader screen press the camera button an the reset button at the bottom of your phone 'the little hole next to the usb'.
You could try hard reset press and hold both bottom buttons and reset 'you will lose your contacts sms ect' so back up using pimbackup.
If your digitizer is not working 'doesn't respond to touch' try sync your phone and install mymobiler/,then you can browse you phone and backup to sd card before hard reset.
Already tried that, as I included in my previous post about getting access to the bootloader. I can't get into the bootloader with Camera Hold + Reset. Nothing happens, it's as if the buttons don't respond correctly.
Hold down both "bottom buttons"? You mean GPS and IE buttons? Tried that too. Tried a few others. And I'm certain this worked before. Like I said in my post, nothing has happened to the phone recently - it just started acting this way. So I'm guessing it's more a software problem than a hardware problem. Since I have HARD SPL and a homecooked OS the chances of it being that is a probability.
I have nothing that needs to be backed up, so I don't need to do anything about that.
Hi
I have same problem. Screen doesn't react (only if press hard), and i can't enter bootloader and make HR.
Also, I had same problem 2 month ago. But I managed to revive it - made a lot of try of HR and one of them was successful. but now it is dead again and I don't know what to do...
Hello XDA Developers ,
Recently , I was testing out the Power Control Widget on my Nextbook Premium 7 . When I pressed it after it was fully bright , the screen went completely black . Now it is connected to my PC thanks to my memory of how to connect it to the PC . ( I touched the button about USB ) Can anyone help ? Any solutions from ADB commands to guessing on the screen . To be honest , it happened again 2 months ago , I solved by guessing with silent off , I can hear sounds and its on its stock launcher.
Solutions Tried
1. ADB commands posted on the Web according to Google
2. Guessing on the Screen ( It's hard since the device is in silent mode )
3. Contacting NextbookUSA ( Suggested Return )
XTAndroid,
I start to face this problem on my Nextbook Premium 7 too few days ago. Have you found any solutions yet?
same issue here... still no one can help huh
Hello, Im new guy here. Im using LG P880 4x (Android version 4.0.3) HD phone and I have these problems. Hope someone can help me.
Actually I have three questions, but two of them is assigned to the first Topic
First:
Noticed that I am using version 4.0.3 - a little old, and there is a problem when I try to update phone with LG updater it shows that I have the newest update. But it's a lie I think. It shows that i thas never updated my phone. Thats one thing, thats not so imortant.
Secont thing about version update is about bootloader. I have red a lot of tutorials and other articles about "How to unlock bootloader" but nothing happens, with that adb command, i think it was like this "adb restart oem-install" well something like that. And i tryed a lot of other adb commands from tutorials. For this (adb restart oem-install) it just restarted my phone and nothing happaned. Another thing about his. when I acces that hiden menu 3845#*880# (i think it was like that). Tutorials showed that there I can see my bootloader status (lets say staus, dont know how to name it), but when I open this menu, There's not menu called Bootloader. So I cant install cyanogenmod, because everywhere in tutorials it was sayed that i need to unlock bootloader.
Second:
Its about lock screen. I want to change lock screen from default to another. Right now Im using LockerPro. Everything works i thing good, but that original lock screen is messing everything. Sometimes when i lock screen and then unlock in shows my original lockscreen - sometimes it shows original lock screen and then after like 2 secs shows thad LockerPro, but sometimes it shows original nad when I unlock screen it then again shows that LockerPro lockscreen and I need to unlock phone again. That a little bit annoying.
Hope to get some help, atleast with second problem..
Hi everyone,
i have just recieved my Meizu mx4 pro 16GB from Fastcardtech and the version was instaled is 4.2.8.1A version .and the model number is :M462U.
when i tried to set the fingerprint reader it does not work it tell me place your finger on home button and when i do nothing happend ,well it is supposed to take me on this screen (look image bellow ) when i palce my finger on the home button:
https://www.aivanet.com/wp-content/uploads/2014/12/meizu-mx-4-pro-unboxing-aa-12-of-16-710x399.jpg
but it always stuck on this screen :
http://blog.flosmall.com/wp-content/uploads/2015/04/4-5.jpg
no matter what i do nothing work,but here what i did :
1 - tried all my 10 fingers and my wife’s and son’s fingres . (same problem)
2 - reboot . (same problem)
3 - clear data and factory reset. (same problem)
4 - i installed those version ( 4.1.1.2A and 4.1.1.1A and 4.5.7.1.A ) and repeated all the tries above but the problem remain.
the phone came new and it does looks new to me.and the main reason that i bought this phone is that because it was a flagship and have a fingerprint reader.i still didn’t contacted the resseler ( FastCardTech) .i wan’t to confirm first if this problem is sofware or hardware side.
please anyone can help me . :frowning:
Edit 2 :
After third time re-install my conclusion is it happens when adding extra languages.
So the Superlocale was the trigger but not the cause as it happened without having either of the 2 mentioned apps installed.
The only "special" thing i did was using adb to get rid of some pre-installed stuff like Google Youtube, Keep, Films etc (some more than i did in the past. Wonder if that could be causing the "stuck on flashing unlock screen"?
Edit : allready managed to enter Oppo recovery and resetted my phone.
BTW it wasn't the Insular app but SuperLocale to quickly switch languages. After granting the special permission the same thing happened again and i had to do another reset again .... ouch.
I've been playing around with the Insular app yesterday (which creates a sandbox envorinment by means of the Android work profile) and this morning I found the phone flashing at the unlock screen.
Guess the app really messed up. But even worse is;
- I cannot unlock the phone
- I cannot power down the phone
- I cannot enter recovery
I can use the Power + Vol+ combo but it just restarts the phone leaving it flashing at the unlock screen without any means to unlock
Meaning I cannot factory reset the phone....
What else is there I can try to get my phone back?
Oppo Find X2 Pro