Hello Guys Presenting unbrick tool for Realme GT Neo 2..
Feature:
wipe data (bypass pattern lock)
firmware flash via edl
Steps:
Download attached file
extract zip
Install qcom 9008 EDL driver on your computer
Run tool, Connect phone in EDL Mod
once com detected click Connect device by selecting any one method
then use Factory Reset button for Pattern wipe and Download button for firmware flash, for firmware flash locate extract ofp folder then click download button
Note:
you have to merge super.img using simg2img.exe
if header data of super image is not valid it will reject it in this condition use twrp dumped super image or from OTA
don't flash full firmware because it will wipe IMEI too, to fix bootloop edit rawprogram from extracted ofp and keep these partitions boot, recovery, super, vbmeta & dtbo, save modified file, delete all other rawprogram & patch files from firmware folder and load it in tool..
I am not responsible for any nvdata loss, process only after efs and qcn backup
Related
Ported TWRP recovery, only USB-OTG/adb/external SD card not working while inside TWRP. The rest is working fine.
Root obtained tested with all functions working with SuperSU 2.82 flashable zip.
TWRP: Flash this with SP Flashtool v5.1720 "Download only" mode
http://bit.ly/l551twrp
Messed it up and need the stock ROM?
http://bit.ly/l551stock
SP Flashtool 5.1720
http://bit.ly/spft51720
Latest Mediatek All in one USB Flash/ADB/CDC Driver package (Required to flash)
http://bit.ly/mtkdriveraio51632
Summary of instructions
Install drivers, extract flash tool, extract TWRP flash package zip, open flashtool.exe, point “Scatter-loading file” to file containing the word “scatter” located in TWRP flash package extracted folder. After scatter loads, you may uncheck all files except recovery inside SP Flashtool. Please make sure the mode is “Download only” from pull down menu. Press the green download arrow icon then plug in the unit from a completely off state.
It works good, thanks.
Help my plz
I want a rout to phone posh l551
This tool has been heavily modified for the zte max pro, it was originally posted as the axon 7 tool. Not all features have been included as not all work as of yet for the pro.
ZTE Zmax Pro EDL Tool
BAT-program for Flash / Backup / Restore / Unlock the phone in EDL mode
Qualcomm HS-USB QDLoader 9008 (COM ...)
!!! Whatever you do, you do at your own risk !!!"
!!! If you are not sure of yourself do not use this program !!!
Special requirements (read first) !!!
1. The program must be unpacked
2. Before using the program, make sure that:
- It is desirable to copy the program to the root of the disc, for example: C:\ZTE_Zmax_Pro_edl\ or D:\ZTE_Zmax_Pro_edl
- You launched this program as administrator
- You have drivers installed, preferably original for ZTE Zmax Pro
3. Read carefully what the program displays on the screen (I specially wrote the tips, the information is very useful, many questions disappear)
Features of the program:
1. Automatically reboot the phone into EDL mode
2. Finds the connected phone and forces the COM-port speed to 115200
3. Can flash , backup, restore
4. Analyzes folders for missing required files
5. and others ...)))
Structure of program folders:
1. Folder flash - in this folder you need to copy the files you want to flash
Subfolders:
folder full - if you want to flash full firmware (official, adapted for EDL mode), then in this folder you need to put all the files from the firmware for EDL mode:
its name usually looks like this: A2017 _......._ FULL_EDL
folder boot - if you want to flash your kernel file, you need to put a file named: boot.img in this folder (the file name must be exactly that!)
folder recovery - if you want to flash your recovery file, you need to put a file named: recovery.img in this folder (the file name must be exactly that!)
folder modem - if you want to flash your modem file, you need to put a file named: NON-HLOS.bin in this folder (the file name must be exactly that!)
folder splash - if you want to flash your splash file, you need to put a file named: splash.img in this folder (the file name must be exactly that!)
2. Folder backup - the folder contains backup copies of the phone partitions created by the program
Subfolders:
folder all - this folder contains backups of all partitions, except userdata
folder full - this folder contains backup of all partitions included in the FULL EDL firmware
folder boot - this folder contains a backup of the boot partition
folder recovery - this folder contains a backup of the recovery partition
folder modem - this folder contains a backup of the modem partition
folder splash - this folder contains a backup of the splash partition
folder efs - this folder contains backup of the efs partition
3. Folder unlock - contains all the necessary files to unlock (do not touch it!)
4. Folder logs - contains all the logs of the program
5. Folder tools - contains all the necessary files for the program (do not touch it!)
For those who still do not understand how to flash (FAQ):
Question: I want to flash a patched or original boot, how to do this ???
Answer: Download the boot you need, rename it to boot.img and place it in the folder ZTE_Zmax_Pro_edl\flash\boot\. Run the program ZTE_Zmax_Pro_edl.bat and select Flash -> Flash Boot
Question: I want to flash TWRP, how to do this ??? !!! Only for those who unlocked the bootloader !!!
Answer: Download official TWRP or TWRP by @NFound, rename it to recovery.img and place it in the folder ZTE_Zmax_Pro_edl\flash\recovery\. Run the program ZTE_Zmax_Pro_edl.bat and select Flash -> Flash Recovery
Question: I want to flash the modem, how to do this ???
Answer: Download or take the NON-HLOS.bin file from firmware and put it in the folder ZTE_Zmax_Pro_edl\flash\modem\. Run the program ZTE_Zmax_Pro_edl.bat and select Flash -> Flash Modem
Question: I want to flash the splash, how to do this ???
Answer: Download or take the splash.img file from firmware and put it in the folder ZTE_Zmax_Pro_edl\flash\splash\. Run the program ZTE_Zmax_Pro_edl.bat and select Flash -> Flash Splash
!!! Download !!!
View attachment ZTE_Zmax_Pro_edl.zip
Hi loonycgb2. I have a question. I want flash a full firmware but there in not the optionin the app. Can you help me?
How do you unlock the bootloader on z981?
How do you unlock the bootloader on z981?
fastboot oem unlock command does not work.
the efs backup feature throws an error where it cannot find persist.bin. it also cant restore the backup for the same reason. all done according to instructions
Hi everyone,
I just got a cheap chinese tablet with android 9.0, i tried to root it with the available tools but no success, so i'm thinking of making my own twrp image, therefor this question: is it safe to readback the recovery.img file using spfalsh tool (and since all the scatter files of its chip MT6580 have the same address and length for the recovery.img file), then make my own twrp, flash it, and if it fails, reflash the "original" recovery i extracted? will this work?
fateh.ah said:
Hi everyone,
I just got a cheap chinese tablet with android 9.0, i tried to root it with the available tools but no success, so i'm thinking of making my own twrp image, therefor this question: is it safe to readback the recovery.img file using spfalsh tool (and since all the scatter files of its chip MT6580 have the same address and length for the recovery.img file), then make my own twrp, flash it, and if it fails, reflash the "original" recovery i extracted? will this work?
Click to expand...
Click to collapse
You can backup the recovery file using MTK Droid Tools, yes, but you must install a custom recovery that can fit into the recovery partition. You can find the recovery partition size on the scatter file. If you want a bigger custom recovery, you must edit EBR{1,2} and MBR files.
efec said:
You can backup the recovery file using MTK Droid Tools, yes, but you must install a custom recovery that can fit into the recovery partition. You can find the recovery partition size on the scatter file. If you want a bigger custom recovery, you must edit EBR{1,2} and MBR files.
Click to expand...
Click to collapse
MTK Droid Tools does not work properly with this tablet, it gives me this error
--- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
Click to expand...
Click to collapse
so, will spflash tool by itself suffice?
Hello I Port TWRP 3.3.1. and Magisk Manager v23 for rooting BV9900 with Firmware BV9900_EEA_S900AA_V1.0_20200522V12_user_20200523-0035!
If you have Firmware BV9900_EEA_S900AA_V1.0_20191225V08_user_20200103 Update to BV9900_EEA_S900AA_V1.0_20200522V12_user_20200523-0035.
instructions:
You must follow a procedure!
Make Backup because your data will be wiped!
Unlock Botloader!
Flash Firmware BV9900_EEA_S900AA_V1.0_20191225V08_user_20200103 with SP Flash tool -Includet Scatter File
Offical Firmware:
MEGA
MEGA provides free cloud storage with convenient and powerful always-on privacy. Claim your free 20GB now
mega.nz
Boot system
Connect wifi internet
Make system update to version BV9900_EAA_S900AA_V1.0_20200522V12_20200523-0035 - Normal Update in the Phone
Run on PC adb Tool and flash Vbmeta.imf from TWRP Folder:
adb devices
adb reboot-bootloader
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Power on Mobile
Power off Mobile
Run Sp Flash tool and Flash:
(RECOVERY)TWRP-Recovery 3.3.1.img and
(BOOT)-Boot-Magisk23.img with SP Flash Tool
Disconect Phone from PC
HOLD KEY UP and POWER. Then click Recovery.In TWRP-Recovery Slide "Swipe to Allow Modifications"
Go "Mount" Vendor and nvada
////If you cant mount Data Partition in TWRP-Recovery:
Format Data Partition In TWRP Recovery - You must Formating data not Wipe
Wipe Dalvik/Cache
Reboot to Recovery (check now if you can mount data)
/////
Copy File from BV9900 TWRP&Magisk/fstab/Vendor/etc to vendor/etc
Copy File from BV9900 TWRP&Magisk/fstab/nvdata to nvada
Reboot to System
Instal magisk apk from your launcher....Click ok and restart phone.
Now you can login to google acount.
If you have problem with loading Widgets find build.prop file in mobile or download from Playstore BuildProp Editor
This problem is solved very easily with root access. You just need to fix one line in the build.prop file:
ro.freeme_freemanager=1
ro.hct_autostart_manager=1
In these lines you need to change 1 to 0
Magisk manager works without TWRP great
In TWRP recovery dos not work mtp
And big problem with TWRP is if you formating data then mobile can not recognize sim card (IMEI null,baseband unkown)
If anybody have solution thanks.
Android 10?
Android 9
How remove Chinese text? Thank You.
i need super.img backup file, the device stuck at fastboot, you can backup using this tool (root needed) https://forum.xda-developers.com/t/tool-root-adb-partition-backup-restore-tool-for-windows.4512231/
Download the firmware files from redmagic's support site and use Fastboot Enhance to flash the payload
Bricked my phone couple of hours ago fixed this way