Hi, I would like to know if someone has tried DSU with A22 5g. I found that is possible with DSU Sideloader and Unlocked Bootloader. Thank you for the answers
You can try it by using the dsu sideloader thi g
It's a opensource apk
Yes, I've tried using pe's built in dsu loader android 14 and it worked. I've also tried dsu loader app with Flyme os, miku ui, crdroid, lineage and miui. Everything worked but miui
Related
Dear devs, I have been trying so hard to flash Phusson's Treble GSI image into my Sailfish and I managed to do it without any problem. But, when it boots, it stayed stuck at the android splash screen and couldn't boot into the system. I've tried flashing Magisk, it didn't work. Tried flashing the AVB for Pixel 2 just to try my luck, no luck in that area as well. I'm not very good with the whole thing and I could only run some basic fastboot and adb commands. So far, if I flash a custom ROM using TWRP, it does work. Just for some weird reason, any Treble GSI image just won't boot on my phone.
Help appreciated.
working GSi Roms
just pushing this up. i recently got a cheap pixel 1 and thought tinker around with it. my xperia 10 camera is really not that good....so i think about using a pixel for snapshots in daily life.
just wonder why i cannot find much informations about sailfish treble supported roms. with my sony its quiet easy. but i have also this problem. all GSi roms i flash stuck at bootlogo...not even reboot....just stuck there. seems weird. i would say i know what i do....but i cannot figure out why there isnt a working GSI rom (android 10)
i read also in wiki of GSI-phh that people got some treble rom running.....but that was 8.1 or so.
just curious if there are people out there running a treble rom for on pixel 1?
Opened a ticket to try to get sailfish supported in the Android 10 Phusson Treble GSI images here: https://github.com/phhusson/treble_experimentations/issues/1161
I'm trying to install LOS 16.0 but it just won't work. I've tried using the TWRP 3.3.1-16 Q Unofficial by mauronofrio and it works that I can get into TWRP and can flash the rom and GApps, but then after that process once I try to boot into the OS it is just forever stuck in either fastboot or stuck on the bootloader unlocked warning screen. I did realize that I had to use fastboot flash boot twrp*.img because they disabled fastboot boot twrp*.img in the Android 10 update, but then am I supposed to reflash something on that boot partition now? The whole process is very confusing and the instructions from the LineageOS seem to not work at all. Is there anything I can do right now or is it just not possible to install this until TWRP, or OOS, or something I'm not knowledgeable enough to know about updates?
It's because you are using OOS 10.1 as a base (android 10) and you are trying to install Lineage OS 16 (android 9), so it's quite obvious why it isn't working. Try lineage OS 17 instead.
TheSproker said:
It's because you are using OOS 10.1 as a base (android 10) and you are trying to install Lineage OS 16 (android 9), so it's quite obvious why it isn't working. Try lineage OS 17 instead.
Click to expand...
Click to collapse
Lineage OS 17 won't work either. The developer intentionally used OOS 9 as base since fastboot boot command doesn't work yet on OOS 10. OP needs to downgrade to OOS 9 first, whichever of the two Lineage OS versions they wish to use.
remewer said:
Lineage OS 17 won't work either. The developer intentionally used OOS 9 as base since fastboot boot command doesn't work yet on OOS 10. OP needs to downgrade to OOS 9 first, whichever of the two Lineage OS versions they wish to use.
Click to expand...
Click to collapse
I tried this. I downgraded to 9.0.9 and still the fastboot boot command is not working. Apparently this has something to do with the bootloader image itself not being downgraded?
I give up now, my temp phone I was using for holding backups for chat data just randomly wiped itself on havocOS and I've just lost years of chats and stuff and it's got me really down right now. They did fix the fastboot boot issue with today's 10.3.0 update but still nothing is working from any tutorial to get this thing to work on lineage, it just won't boot to it and twrp keeps having errors during flashing. This used to be so much easier on my older phones and I've installed this OS on about 5 phones now but OnePlus 6 just doesn't seem to work no matter what. I'm just going to go back to OOS and hope LineageOS 17.0 will get these issues ironed out by the time it releases. Severely disappointing and a waste of 3 days now but oh well
In my opinion, this is the easiest way to downgrade everything to OOS 9, including bootloader https://forum.xda-developers.com/oneplus-6/how-to/op6-collection-unbrick-tools-t3914109
After that, just unlock the bootloader again like usual and follow the LOS16/17 page's install instructions and you should be good to go.
I tried to install Havoc 3.5 while i was on 10 Ob2, unlocked bootloader and installed patched twrp, then rom. Got stuck in fastboot mode. **** hell i messed everything, later i found fastboot recovery rom from xda, flashed it, thank god it saved me. For me, msm tool was not getting connected, got an error like sahara xyz something... Then after refering to multiple xda threads came to know that most of the present 10 custom roms are based on oos android 9. Then again i used downgrade package from community, reverted back to ob 25 oos (pie), then as usual installation process. So if you are interested in custom roms, downgrade to pie. And again i wanted to go back to complete stock from havoc but unfortunately msm was not responding and fastboot roms wont support upgradation (im not sure), i went to twrp and installed stable 9.0.9 to both partitions + twrp installer. Then 10 oos stable to both partitions + twrp. Then booted up and installed Ob2 again from system updater, lost twrp on that process, then locked bootloader, so mow completely stock ? lot of work for nothing ? oos is better for me.. infact i got used to that. maybe i should purchase another phone to continue the momentum of getting latest updates. crazy oos influence ?
i was thinking to try Dsu Loader on my M12. As its shipped with stock Android 11 so M12/F12 supports Dynamic Partition for sure. But someone tested Dsu loader on it? Any informations will be helpful for me.
Stock defiently doesn't have it, but it should work on my Lineage after I've picked a needed kernel commit.
Hello! Recently I decided to unlock my a51 boot loader and try something new. And I wanted to flash a GSI from Google, but I really don't know if is possible and if it is, should I flash it through TWRP? I guess I should use vmbeta.img from google as well.
And if it's not possible, what android 12 GSI could I try to flash on this device? Thanks!
I wolud like to change the Android version it's runing on the this chinese phone. I Try find some post or any informatin helping with it but i didn't find anything. Could you help me to change it? Do you know if is possible to change it
ro.product.system.brand - STYLO
ro.product.system.device - INKULU_PRO
ro.product.system.manufacturer - IMG
ro.product.system.model - INKULU_PRO
ro.product.system.name
A Custom ROM for this Unisoc ( Spreadtrum ) SoC based phone doesn't exists, AFAIK.
You need to unlock bootloader first. this might be the first challenge with the search button. just a hint here, sure there is better link somewhere.
not sure about the Android 10 Go version support DSU, but should be possible to build your own super.img with GSI as system partition.
DSU Sideloader for gaining temporary/permanent root, testing GSI's or installing GSI's Semi-permanently, pulling boot image, AND making your backups
Hello, I just wanted to post this as an answer to many questions regarding not being able to use DSU to install a GSI for testing or gaining root. The DSU install in developer options is NOT what we are using for installing GSI's temporarily for...
forum.xda-developers.com
alecxs said:
You need to unlock bootloader first. this might be the first challenge with the search button. just a hint here, sure there is better link somewhere.
not sure about the Android 10 Go version support DSU, but should be possible to build your own super.img with GSI as system partition.
DSU Sideloader for gaining temporary/permanent root, testing GSI's or installing GSI's Semi-permanently, pulling boot image, AND making your backups
Hello, I just wanted to post this as an answer to many questions regarding not being able to use DSU to install a GSI for testing or gaining root. The DSU install in developer options is NOT what we are using for installing GSI's temporarily for...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank you I will have a look