SM-S908B/DS (O2 UK)
Model: SM-S908B
Region: EUB
Model name: SM-S908B / Galaxy S22 Ultra
Model full name: SM-S908BZWDEUB
I cannot find the original firmware anywhere. When I connect Smart Switch it says failed to connect to the device.
Any help please I just want to reset the phone to factory default.
Check Windows Event Viewer for error messages. Try another port/cable.
Roll back or update the driver.
Access the phone through Disk Management and see if it will connect there, it should.
blackhawk said:
Check Windows Event Viewer for error messages. Try another port/cable.
Roll back or update the driver.
Access the phone through Disk Management and see if it will connect there, it should.
Click to expand...
Click to collapse
I should add, the device is stuck in "An error has occurred while updating the device software" and I also have the message "debore : on_fail_block_custom_bin_oem"
kacsa420 said:
I should add, the device is stuck in "An error has occurred while updating the device software" and I also have the message "debore : on_fail_block_custom_bin_oem"
Click to expand...
Click to collapse
You're in over my head, sorry. Hopefully someone here can help you.
blackhawk said:
You're in over my head, sorry. Hopefully someone here can help you.
Click to expand...
Click to collapse
https://i.redd.it/r0yc1fj9hhl91.jpg
kacsa420 said:
https://i.redd.it/r0yc1fj9hhl91.jpg
Click to expand...
Click to collapse
Can you still access the boot menu via the buttons?
blackhawk said:
Can you still access the boot menu via the buttons?
Click to expand...
Click to collapse
No, if I use the side buttons it just restarts back to this screen ;/
Hold power volume down until screen goes black while device is connected to computer if you are stuck on a certain screen. If device boots back to Emergency screen it's OK you can still flash from that screen. Just keep device connected to computer, hold power volume down until screen goes black. Then quickly hold volume up and down at same time. Again if it boots to Emergence screen, device should still be recognized by modified Odin. Flash stock firmware
Samsung Galaxy S22 Ultra Firmware Download SM-S908B Free Download
Samsung Galaxy S22 Ultra Firmware Download SM-S908B Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
butchieboy said:
Samsung Galaxy S22 Ultra Firmware Download SM-S908B Free Download
Samsung Galaxy S22 Ultra Firmware Download SM-S908B Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
Click to expand...
Click to collapse
I think I'm ****ed,
Model: SM-S908B
Region: EUB
Model name: SM-S908B / Galaxy S22 Ultra
Model full name: SM-S908BZWDEUB
When I search SamFW I cannot find an EUB version, I don't know what to do
Usually the firmware is the same it just provisions to your Sim. I know with United States Snapdragon I can flash any carrier firmware as long as the build number is in line with my carrier.
It appears they all have same build number AVH9
Wait hold off on that
I'm checking with Mohammad...hold tight
What was the actual build number you were on and bootloader? If your bootloader updated to revision 2 you can't flash back to revision 1
Once you find out what build number you have you should be able to flash
butchieboy said:
Once you find out what build number you have you should be able to flash
Click to expand...
Click to collapse
S908BXXU2AVH9
Then you can use any of them from link I sent from Samfw.
As long as it's XXU2AVH9 should be fine. The firmware will provision to you sim
If it fails, don't factory reset just get back to download mode and flash again. Sometimes a second flash of firmware is common
Related
Another fine ROM For other variant of Galaxy S 4 - Korean Version (SHV-E300S), this rom is provided by Samsung-Updates.com, and thanks for the Sammobile who first found this release
Latest:
Device: SHV-E300S (Galaxy S 4 - Korean)
Region: SKT (Korea)
Android: 4.2.2 (Jelly Bean)
ChangeList: 507268
Build Date: 19.04.2013
PDA: E300SKSUAMDK
CSC: E300SSKTAMDK
MODEM: E300SKSUAMDI
Download Firmware (E300SKSUAMDK, SKT) Here
Download Kernel (E300SKSUAMDK, SKT) Only
Download Odin 3.07 (Flashing Program) Here
You will be able to get all the versions as soon as Samsung releases it at: SHV-E300S Firmware Repository Page from Samsung-Updates.com
Enjoy!
AL
PS: This download is powered by Samsung-Updates.com , Sammobile and Samsung's KIES !
Unfortunately I bought a SHV-E300S (32GB).
AT&T and T-Mobile puts this phone on the GPRS slow lane.
this i shv-300s )
SKT Hidden Menu helped me. I'm on T-Mobile 3G now.
T-Mo is bring their 4G network online today. Maybe.....4G for the SHV-E300S is coming.
soundping said:
SKT Hidden Menu helped me. I'm on T-Mobile 3G now.
T-Mo is bring their 4G network online today. Maybe.....4G for the SHV-E300S is coming.
Click to expand...
Click to collapse
Hey there, how did you get the shv e300s imported to you? I am in the UK and I cant seem to find anyone importing the phone here. How did you get yours? Thanks for your help
I bought mine from ebay. It came from S. Korea factory unlocked and preset to english.
Looks like the seller isn't selling this model now.
video call
soundping said:
I bought mine from ebay. It came from S. Korea factory unlocked and preset to english.
Looks like the seller isn't selling this model now.
Click to expand...
Click to collapse
I also bought this 1. the problem is that I can't make normal video call.
when I press video call, it says "video call is not supported in international roaming area"...
the same sim used on my s2 was ok before.
any chance to get custom rom to fix this?
plz help....
how can i factory unlock my SHV-300S and remove all the bloatware? Can i uninstall them all?? I am a noob,help please!
avishaan said:
how can i factory unlock my SHV-300S and remove all the bloatware? Can i uninstall them all?? I am a noob,help please!
Click to expand...
Click to collapse
Where did you get your SHV-300S ? if you imported in then it should be automatically factory unlocked.. Also if you wanna remove the bloatware use this app Link2SD and by the way be carfeful what you remove as you can brick your device just make a full rom backup and save it some where before you proceed.....
N1NJATH3ORY said:
Where did you get your SHV-300S ? if you imported in then it should be automatically factory unlocked.. Also if you wanna remove the bloatware use this app Link2SD and by the way be carfeful what you remove as you can brick your device just make a full rom backup and save it some where before you proceed.....
Click to expand...
Click to collapse
Look.. I got my mobile from china,it showed on the model number that it was GT-I9505,it was already factory unlocked,i wanted to remove chinese bloatware by downloading another firmware,but when i got on the download mode,it showed korean language and showed that it was shv-e300s. then i had to download korean firmware because the mobile did not go past the samsung logo. after flashing,it was fine,but there are loads of korean bloatware,atleast 15
it is also factory locked,and there is the SK telecom boot animation that shows when restarting or shutting down,i would like to remove this also and replace it with the official samsung logo.
how to factory unlocked? i have rooted the phone already.
avishaan said:
Look.. I got my mobile from china,it showed on the model number that it was GT-I9505,it was already factory unlocked,i wanted to remove chinese bloatware by downloading another firmware,but when i got on the download mode,it showed korean language and showed that it was shv-e300s. then i had to download korean firmware because the mobile did not go past the samsung logo. after flashing,it was fine,but there are loads of korean bloatware,atleast 15
it is also factory locked,and there is the SK telecom boot animation that shows when restarting or shutting down,i would like to remove this also and replace it with the official samsung logo.
how to factory unlocked? i have rooted the phone already.
Click to expand...
Click to collapse
i got the same model as you, its got the same boot up screen as you the SK Telecom full hd.. But mines factory unlocked ??? Also im pretty sure you dont have to flash the kernel if you am flashing a rom, i could be wrong. here try this post it got everything you need for your e300s http://forum.xda-developers.com/showthread.php?t=2284543
New xda user SOS!!
Hi, do you have a link that has the E300S Firmware,Kernel and Odin for flashing i.e. E300SKSANMH3_E300SSKTMHK3_SKT zip file .with a faster file transfer rate coz sammobile's terafile link is downloading at 10kbps it will take me 3 days to download it. I need help. Thanks.
I'm a beginner trying to upgrade/flash a S7 from China to have access to Google apps, but with no success so far (Secure check fail: Boot). In Odin mode "Product Name SM-G930F" is shown, but in Settings->About device->Model number = SM-G9300. How can I determine which ROM to use?
Boot the phone into download mode (Volume Down & Home & Power)
Whatever model is shown there is the correct model, firmware has likely been faked to sell the phone as the G930F - very common
*Detection* said:
Boot the phone into download mode (Volume Down & Home & Power)
Whatever model is shown there is the correct model, firmware has likely been faked to sell the phone as the G930F - very common
Click to expand...
Click to collapse
Thanks for the information. Then I can assume that it is a G930F which is shown as Product Name in Odin/Download mode and that it has been flashed with a G9300 firmware. It would then be safe to flash it with a G930F ROM.
danlid01 said:
Thanks for the information. Then I can assume that it is a G930F which is shown as Product Name in Odin/Download mode and that it has been flashed with a G9300 firmware. It would then be safe to flash it with a G930F ROM.
Click to expand...
Click to collapse
If it says G930F in Download Mode then yep you need to flash a G930F ROM, not sure why anyone would flash a G9300 ROM to a G930F S7 though, it's usually always the other way around
*Detection* said:
If it says G930F in Download Mode then yep you need to flash a G930F ROM, not sure why anyone would flash a G9300 ROM to a G930F S7 though, it's usually always the other way around
Click to expand...
Click to collapse
Sorry, my mistake. It actually says "G930V" in Download Mode, but on the back cover of the phone it says "G930U" (fake phone?). It was loaded with G9300 firmware which would make sense for the Chinese market. I've flashed it with a Verizon stock ROM and it seems to work. Just wondering if there is any "cleaner" firmware (G930U?) with less bloatware and the possibility to change the language completely and to get rid of the "Sim card not from Verizon" notification? Without rooting...
danlid01 said:
Sorry, my mistake. It actually says "G930V" in Download Mode, but on the back cover of the phone it says "G930U" (fake phone?). It was loaded with G9300 firmware which would make sense for the Chinese market. I've flashed it with a Verizon stock ROM and it seems to work. Just wondering if there is any "cleaner" firmware (G930U?) with less bloatware and the possibility to change the language completely and to get rid of the "Sim card not from Verizon" notification? Without rooting...
Click to expand...
Click to collapse
Not a fake phone, just modded to look like a different model, you can flash the G930U firmware to the G930V iirc
Yea looks like it's been faked to look different, common with the G930V's.
https://www.sammobile.com/firmwares/search/g930u/ those G930U firmwares should work, basically any snapdragon firmware would work on any snapdragon S7 I thought.
Another resource is updato.
I have an UK Exynos S22+ And every ota update I try on this phone less than 900mb fails with ODIN MODE (SVB Fail)! Or just fails at 25%
I have tried to reflash clean and from the Odin mode screen to recover it multiple times and to make the error stop but it hasn't worked and every OTA update I attempt still fails.
After reaching 49% it goes back to 25% and fails after which it acts like it's rebooting and then shows the odin mode screen. Or it goes back to the old firmware after failing at 25% outright. It’s getting tiring now.
I also get random reboots on this phone not sure why but every so often the phone just crashes and then restarts.
Anyone have an idea of what I could do? I think giving it to samsung is the only way to get it fixed but what do I tell them about me flashing the phone through odin to recover it?
Yup, take it to Samsung to fix it. It shouldn't be crashing like that
raul6 said:
Yup, take it to Samsung to fix it. It shouldn't be crashing like that
Click to expand...
Click to collapse
Will they still take it under warranty if I tell them I recovered the phone by flashing through odin? Because the phone was effectively bricked otherwise.
I think they will. Get in contact with them, saying what is not working, and they will guide you through the process. No need to mention what you did before
Download this firmware
Download Galaxy S22 SM-S906B (EUX) S906BXXS2AVHD in Samfw - Samsung firmware download
Galaxy S22 SM-S906B (EUX - European Union) S906BXXS2AVHD S(Android 12) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
And load Ap to Ap , BL to BL etc etc...and flash it again !!!
You end up like this because you dont flash the ota with odin ... flash the full firmware that has more than 4gb.
salbaticu said:
Download this firmware
Download Galaxy S22 SM-S906B (EUX) S906BXXS2AVHD in Samfw - Samsung firmware download
Galaxy S22 SM-S906B (EUX - European Union) S906BXXS2AVHD S(Android 12) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
And load Ap to Ap , BL to BL etc etc...and flash it again !!!
You end up like this because you dont flash the ota with odin ... flash the full firmware that has more than 4gb.
Click to expand...
Click to collapse
I am flashing the whole 7gb firmware through odin. The problem I have is with updates via wifi. Those updates keep failing for me which forces me to flash the whole firmware every time to unbrick the phone.
raul6 said:
I think they will. Get in contact with them, saying what is not working, and they will guide you through the process. No need to mention what you did before
Click to expand...
Click to collapse
I will have to try that thank you
So if I do the soft reset by holding volume down and power button it just restarts and comes to that brick download screen. It's all blue with a white arrow that says dont move away from target (something like that). If I continue to hold that in it just loops that cycle. if I manage to get it into recovery (its hard to time it with it immediately restarting) it will bring up the android guy and flash "error" under it and immediately restart. If I'm still holding in the recovery command buttons it continues that loop. It does show the Samsung screen at the very beginning. If I put it on a slower charge (say from a 12vdc car plug) it will show a black screen with red letters stating an error fail to read bota partition.
I am a complete noob with tech. So keep that in mind. I tried offering as much info as I can. I have some pics and a vid.
looks like failed update, vbmeta is older than boot. download stock ROM according to your region code (CSC) install usb drivers and flash from Odin3 in proper slots.
BL_*.tar.md5
AP_*.tar.md5
CP_*.tar.md5
HOME_CSC_*.tar.md5
G970USQS8IVL1
aIecxs said:
looks like failed update, vbmeta is older than boot. download stock ROM according to your region code (CSC) install usb drivers and flash from Odin3 in proper slots.
BL_*.tar.md5
AP_*.tar.md5
CP_*.tar.md5
HOME_CSC_*.tar.md5
G970USQS8IVL1
Click to expand...
Click to collapse
I am very noob. Is there much info on how to do this somewhere you can link me? I am very sure this did happen when the phone tried to update (I kept postponing it) while in my pocket during class.
Will it be able to install without boot up? From what I'm understanding at this point the usb just recognizes the phone as a battery. The thing I'm trying to do is recover my data. I could care less about the phone itself
Rooting, ODIN, Firmware, CSC Information And Myths Debunked / Noob's Guide To Samsung Devices
Since a lot of people will have their Galaxy S22 Ultra soon and I myself am thinking about either getting an S21 Ultra or S22 Ultra, I wanted to summarise a lot of information I found out during researching as Samsung devices are quite different...
forum.xda-developers.com
the phone is already in proper download mode (blue screen). however there is a certain timeout, if you can't install drivers then just do what you did in video.
(BST) Boost (CCT) Xfinity (CHA) Spectrum (SPR) Sprint (TMB) T-Mobile (TMK) MetroPCS (USC) US Cellular (VMU) Virgin (VZW) Verizon
https://tsar3000.com/list-of-samsung-csc-codes-samsung-firmware-csc-codes
aIecxs said:
Rooting, ODIN, Firmware, CSC Information And Myths Debunked / Noob's Guide To Samsung Devices
Since a lot of people will have their Galaxy S22 Ultra soon and I myself am thinking about either getting an S21 Ultra or S22 Ultra, I wanted to summarise a lot of information I found out during researching as Samsung devices are quite different...
forum.xda-developers.com
the phone is already in proper download mode (blue screen). however there is a certain timeout, if you can't install drivers then just do what you did in video.
(BST) Boost (CCT) Xfinity (CHA) Spectrum (SPR) Sprint (TMB) T-Mobile (TMK) MetroPCS (USC) US Cellular (VMU) Virgin (VZW) Verizon
https://tsar3000.com/list-of-samsung-csc-codes-samsung-firmware-csc-codes
Click to expand...
Click to collapse
This seems to be pretty common with Samsung updates. Throughout time. I've had a friend that manages a T-Mobile tell me that after an update on two of his phones it came up with a moisture detected in charging port error. I think he said a soft reset fixed those.
Downloading the csc patch just fixes the firmware and would keep my data intact?
aIecxs said:
looks like failed update, vbmeta is older than boot. download stock ROM according to your region code (CSC) install usb drivers and flash from Odin3 in proper slots.
BL_*.tar.md5
AP_*.tar.md5
CP_*.tar.md5
HOME_CSC_*.tar.md5
G970USQS8IVL1
Click to expand...
Click to collapse
sorry for not knowing any of this, but how do i know which roms to download and where would i find them? SM-G970U on t-mobile usa
click on the link you just have quoted. click on TMB. download G970USQS8IVL1. extract the zip.
I want do downgrade this latest version:
Download Galaxy S23 SM-S916B (EUX) S916BXXU1AWC8 in Samfw - Samsung firmware download
Galaxy S23 SM-S916B (EUX - European Union) S916BXXU1AWC8 T(Android 13) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
With the out of the box one:
Download Galaxy S23 SM-S916B (EUX) S916BXXU1AWA6 in Samfw - Samsung firmware download
Galaxy S23 SM-S916B (EUX - European Union) S916BXXU1AWA6 T(Android 13) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
I come from a xiaomi mi 9t pro so I am kind of a noob when it comes to new Samsung stuff.
To me it seems that Samy still makes its phones run slower with every update so I want to revert back and debloat it.
Also is there any other steps that I need to follow if I can flash it besides the :
Turn on USB debugging - Reboot into download mode - Connect cable - Select BL - Ap - CSC.... Corresponding files, In Odin - Start?
Any help would be appreciated.
As long as it's signed firmware and the significant digit is the same or higher than the bootloader version, you can flash it.
Thx a lot for your help.
I checked the bootloader number and everything went OK.
I took the original firmware from Sammobile and flashed it with Odin.