Hello guys,
My thermostat died and i really want to use my phone to fire up the heating.
I know i can't measure temps with my poco but maybe i can spoof a faketemp?
The first problem is connecting to the boiler ( intergas kompakt hre)
My honeywell thermostat connected through RF.
Would be very cool to connect my phone to the boiler without any smart meter in between.
Please let me know how to make this possible
my hardware :
https://www.feenstra.com/shop/cv-ke...-cw4.html#22862=65227&22863=65228&22864=65230 (boiler)
https://www.verwarmenperkamer.nl/ho...pk_campaign=evohome_shopping&pk_kwd=T87RF2025 ( thermostat)
Related
Hi there
I'm embarking on an ambitious project and i was wondering if anyone could help me by giving suggestions.
I am making my own home automation system, and I already have the necessary hardware to get it up and running, but I want to take it a step farther.
I have this (Use google translate lol) http://cba.sakura.ne.jp/kit01/kit_399.htm kit, which is basically a set of 8 relay switches that can be used to turn on and off mains devices (such as lights, powerpoints, ect) that are controlled by a computer through a DB25 printer port. I also have an old Dell D600 laptop that has said printer port, and the software needed to drive the circuit board. This is all well and good, as everything is working so far, but before I bother to install this thing in my roof and hook it up to control my lights, power points, ect, I was wondering if there is a way to use my android phone (HTC Legend, unrooted ) or tablet (Motorola xoom wifi rooted with Tiamat, o/c to 1.7ghz) to control this board through a computer.
I already have a client that remote controls the computer (splashtop remote), and I can achieve this with some difficulty by remote controlling the computer and using the PC software through my phone/tablet, but I was wondering if there is an android home automation program and its PC client service that supports DB25 printer port pinout settings, so I could directly control the circuit board through the app, like the leading home automation apps already available (minus the extremely expensive proprietary hardware that you need with them). If not, has anyone else considered developing one? If anyone could give me any help on this it would be greatly appreciated.
Hi There,
Wondering if someone could help. I had my Mk808b for a while , is rooted and worked very well , until yesterday.
Now doesn t seems to switch on , it was power up with a usb travel charger ( the one I received when I bought it see attachment)
I tried another television that I use as a monitor for my pc and when I connect the usb cable to the pc to power it , it does work , but if I connect it to other power supplies it doesn t .
I truly don t understand why
Hello everyone,
I am having a problem, my android (Overmax Vertis 4510 EXPI) can't connect to computer. I think the problem is fast charging (AC), but this phone doesnt have off button for fast charging, so I downloaded a program that disables fast charging. It requires root, and there is almost none root for this phone, only through computer, and how you know i can't connect my phone to computer...
Any help would be appreciated.
Sry for bad English.
I've been keeping my battery alive by using Battery Pro app but you have to monitor it 24/7. So I bought a couple of CHARGIE devices - a hardware controller that goes between the cord and charge block to turns charging on and off via an app.
My phone connected to the device only once during many tests. I've been trying various settings and suggestions by the company. They insist it will work with Android v6 so maybe the phone is the problem. Device requires bluetooth "ble" so I turned on full location options (GPS, Wi-fi, bluetooth, cellular networks). I turned on setting to display all ble devices - shows a printer from a neighbour's house but not a Chargie 2 feet away! Ideas or information welcome...
Bluetooth is required for basic communication with the Chargie device, but if your particular phone's Bluetooth doesn't work, you can use another phone to configure Hardware Limiter and use it on the 1st phone without the app. Location Access is unfortunately required by Android's device scan library. Chargie doesn't use it (no purpose). iOS doesn't request that, for example.
If that particular Chargie doesn't work at all, on any phone, please contact [email protected] and it will be replaced for free.
Thank you so much for the info. The Chargies work (I have 3), just not reliably or quickly. I can plug in my phone right beside the Chargie and the app says it isn't in "range". Or it continually says the BLUE Chargie isn't in range even when plugged into the RED one! I had all radios including GPS on during the testing but GPS isn't needed. Still not sure how Airplane mode with Bluetooth turned on affects it. BTW my Oneplus One has Bluetooth 4.0.
Getting the phone connected takes so long, it's hardly worth the time to figure out the "hardware limiter" option with a Windows laptop. Not much documentation on it. I certainly don't want to leave my phone beside the device while charging. I was getting some answers via email until I asked how to return the devices. I may have to just accept that the device works 'sometimes'.
I'm a Newbie, recently bought AETOOL box with ISP connector, hoping to unlock A3s Oppo cph1853 passcode.
i make ISP jumper for CLK, D0,CMD,GND and VCCQ.... i use internet pic for ISP jumpers,,,, connected 4 jumpers to AEtool without connecting VCCQ...... the tool didn't recognise my phone after all...... i turn voltage to 1.8... is it necessary for the green light to show?
any idea as to why this happen?
see screen shots.......