Database Info

need help with cradle setting up

hi there need help i bought a serial cradle for xda II (2020) for the life of me i can't get it to conect to active sync .. i borrowed a friends usb craddle and it conected straight away is there a secret to conecting the serial craddle ??
thanks

if picking the comport1 the serial cradle is connected to in activesync's connection setup is not enough i dont know really

stussy006 said:
hi there need help i bought a serial cradle for xda II (2020) for the life of me i can't get it to conect to active sync .. i borrowed a friends usb craddle and it conected straight away is there a secret to conecting the serial craddle ??
thanks
Click to expand...
Click to collapse
Through observation and constant trial and error, I found out that pc windows firewall should be turned off or at least uncheck the don't allow exemption option because this has something to do with the connection from pc and ppc via active sync.
Hope this helps you.

" uncheck the don't allow exemption option"
that should always be the case for people who dont like to
mess with their firewall setting every time they get a program which
try to do any kind of network action

Big Trouble with USB :(

...first of all, my configuration:
G3 Wizard (i-mate branded)
- IPL/SPL 2.18
- radio 2.37.11
- NBD 7.4 touch
my phone works perfect all time but 1 hour ago I've connected it to my pc and SURPRISE: no power light and no charging....
O__o i've changed my usb cable but...nothing!
I've tried to connect to power usb cable (original shipped with my wiz...): nothing at all....PANIC!!!!
hard reset....no solution!
i've tried to connect cable very slowly and...now it's charging but....
...NO ACTIVESYNC!!!
i've tried to connect/disconnect some times and power charging is perfect but NO activesync...
ANY IDEA????
------
extra info: last efficient connection is via WM5torage to a customer notebook...and it works ok
now...also via WM5torage NO DATA TRANSFERT
in bootloader mode it connects...and i downgraded succesfully to last official wm5 italia i-mate rom.
...but no connection

did you try another computer? or the power adapter that plugs into the wall?

yes, of course!
pr0naLd said:
did you try another computer? or the power adapter that plugs into the wall?
Click to expand...
Click to collapse
...it's a good question: too many times it's a joke...but not now.
i've tried in 3 computers...and the response is the same: NO connection, no "usb error"...nothing...only power charging....
If I put (with camera button and softreset) in bootloader mode it's ok...
"bip" on computer and USB un the bottom of the tuchscreen.
I've upgraded anothet time to NBD 7.4 but...
NO CONNECTION

This doesnt really belong in the wm6 forum i think. but maybe you also got a bad activesync on the computer, just start everything fresh again

...usb activesync now works!
after 7 (seven) downgrade and upgrade wm6 -> wm5 -> xda6 -> wm5 -> xda6r2 -> wm5 & so on....
ACTIVESYNC NOW WORKS!!!!
(obviously SAME computer, same Activesync 4.5, same USB port/cable)
i don't know why....but...
I'm HAPPY
thanks to all!
tommaso
TauRho said:
...first of all, my configuration:
G3 Wizard (i-mate branded)
- IPL/SPL 2.18
- radio 2.37.11
- NBD 7.4 touch
my phone works perfect all time but 1 hour ago I've connected it to my pc and SURPRISE: no power light and no charging....
O__o i've changed my usb cable but...nothing!
I've tried to connect to power usb cable (original shipped with my wiz...): nothing at all....PANIC!!!!
hard reset....no solution!
i've tried to connect cable very slowly and...now it's charging but....
...NO ACTIVESYNC!!!
i've tried to connect/disconnect some times and power charging is perfect but NO activesync...
ANY IDEA????
------
extra info: last efficient connection is via WM5torage to a customer notebook...and it works ok
now...also via WM5torage NO DATA TRANSFERT
in bootloader mode it connects...and i downgraded succesfully to last official wm5 italia i-mate rom.
...but no connection
Click to expand...
Click to collapse

I had a problem like that once, I discovered it was my firewall blocking me out of active sync. I had outpost firewall, I disabled it and it connected perfectly

tphan2k3 said:
I had a problem like that once, I discovered it was my firewall blocking me out of active sync. I had outpost firewall, I disabled it and it connected perfectly
Click to expand...
Click to collapse
Yeah I use Cisco VPN for my work, and it screws up ActiveSync at times. Sometimes allows my phone to connect with no problem, and othertimes won't allow activesync to see my phone. Usually turning off the enhanced check box in the USB to PC connections settings will get around it, but not always.

USB port not working
Hello,
I have similar problem.
My I-Mate K-Jam NOT connecting via Active SYNC.
and When i put my device in BOOTLOADER mode there is no appear "USB" below the screen
But only it is charging WITH WALL CHARGER and WITH COMPUTER when i attach to PC
And therefore i can not upgrade my device with usb cable. Can you help me?
HOW CAN I CHANGE MY ROM WITHOUT USB CABLE??
I have tried a few search on this forum but i couldnt find a solve about that.
Sorry for my poor English. I hope i told well. Thanks your advance.
-------------------------
I-Mate K-JAM
IPL : 2.16.0001
SPL : 2.16.0001
GSM : 02.07.10
OS : 2.16.9.1
-------------------------

try this....
loverbadi said:
Hello,
I have similar problem.
My I-Mate K-Jam NOT connecting via Active SYNC.
and When i put my device in BOOTLOADER mode there is no appear "USB" below the screen
But only it is charging WITH WALL CHARGER and WITH COMPUTER when i attach to PC
And therefore i can not upgrade my device with usb cable. Can you help me?
HOW CAN I CHANGE MY ROM WITHOUT USB CABLE??
I have tried a few search on this forum but i couldnt find a solve about that.
Sorry for my poor English. I hope i told well. Thanks your advance.
Click to expand...
Click to collapse
i don't know if this one is a real solution...but...try this (no risk):
- first of all: try to change usb cable (with an old cable my kjam cannot connect....)
- try to plug usb cable SLOOOOOWLY: i've found that my kjam "communicates better" with my old pc il cable is "half-connected" (not tottally plugged in....
and...i don't know if it's possible to upgrade rom without usb connection....i'm sorry
(and sorry form my real poor english)
tommy

Similar problem
This may possibly not be the solution but I had a similar problem. I have an O2 xda mini s and after several days searching I discovered the problem. I opened up the xda and discovered that where the mini usb was soldered to the board, one of the solder points had come loose. The usb was not loose enough to stop the xda charging. By pressing down on the loose solder point the xda immediately showed up and syncing with my pc. I have now resoldered the usb back down and it works fine.
I hope that this is not the problem as it is damned fiddly soldering it back in place.
Hope this helps

I solved my problem
Hello Friends..
I have solve my problem,
I opened the k-jam and renewed the point of usb port with solder machine.
Now it is well working. Charging and sync.
If you have similar problem so i think you can try this one.
But i think you must very carefully.
Solder machine must be very thin.

loverbadi said:
Hello Friends..
I have solve my problem,
I opened the k-jam and renewed the point of usb port with solder machine.
Now it is well working. Charging and sync.
If you have similar problem so i think you can try this one.
But i think you must very carefully.
Solder machine must be very thin.
Click to expand...
Click to collapse
Have you been using some kind of holder for your wizard on your car?
I have seen several USB connectors with a bad attachment to the PCB because it has been used with car Holders that had the USB fixed.

[q] help me. Usb!

i rencetly bought the htc touch pro but when i connect trough usb on pc the pc does not reconize. it's not showing nothing on phone i try severel usb's and diferent pc's with diferent operating system. the phone charges but it not recognize. i only can syncronize trouhg bluetooh.
i did all the step's i find in the forum and in the internet. and i'm getting the same results.
Please anyone can help me ???? tnks.
Sory for my english.

Are you running stock or a custom ROM? I haven't had that issue(yet) but I am trying to help troubleshoot.

viBranZeOS-2.0-WWE this is the rom that i'm using. and i try alredy 2 other roms, and its the same.

I honestly have no idea what the issue is nor a fix/work-around. However, what I am attempting to deduce is if you had a stock ROM I wouldn't be of much assistance because I only run the ROM in my sig/signature, which is a custom ROM. Now, I'm not 100% on if your ROM has this option but I know the ROM in my sig has an option to change the behavior of the USB connection, from mass storage to active sync. What I am attempting to figure out is if one of those modes has been enabled and the registry is just not accepting or if the usb port is stuck on only charging. I have no clue on how you would find out as I've never heard of that ROM. By the way, what version of TP do you have, GSM or CDMA and is it a RAPH100, RAPH110 or what ever is showing above the imei behind the battery. You should see a bar code and just above that are four (4) letters followed by three (3) numbers. Let us know what you have and maybe someone else can chime in.

EnergyROM 29018 w/CHT2.0&.sencity this is your rom ??? i can give it a try. how can i see if is GSM or CDMA ???? my phone is RAPH100.
tnks in advance.
p.s i'v had the phone charging for 2 hours and it's only 2 risks. :s

Clarification: It's not my ROM but it is a ROM that I use most often. GSM/CDMA depends on your carrier/service provider. Looks like you may have a GSM device but I'm not a 100%.
Additionally, what happens when you turn off(shut down your phone completely) and charge?

well i'm using vodafone. and the phone is unlock from factory. it was that the guy told me. i am giving a try with that rom. whit the phone shut down and usb turn on the home buton stay's whit the light. i'n the 3 color screen when i conect the usb it's allways saying serial and don't change to usb.

Not exactly sure that is what I am asking. So do this for me: remove the battery, then put it back in and without turning on the device, plug in your phone to a charger(not USB cable) and tell me if you see an LED circle around the center button slowly light up and then disappear.

yes is that what it happens. and it happens this to with the usb plug in. whit the phone on or off.

So let me guess here, does it still take forever to charge from 30% and still get hot when the device is completely off and plugged in. If so, it still seems like it could be a battery issue to me. I don't know how to confirm if it is the device or the battery but I'd start there if you haven't already.
Additionally, if you are getting to the multicolor screen, then connecting the device to your computer and not seeing the change from Serial to USB and you've already tried changing the USB port, USB cable and computer then it is possible that your device's USB port is somehow broken(for the lack of a better word).

"if you are getting to the multicolor screen, then connecting the device to your computer and not seeing the change from Serial to USB and you've already tried changing the USB port, USB cable and computer then it is possible that your device's USB port is somehow broken(for the lack of a better word)."
you are right i go the multicolor screen and not change from serial to usb. but i didn't try in other computers. i will tell you when i try.

[Q] USB OTG and Charge device

Hello!
Tell me, if such a configuration?
I found this scheme. Is it possible connection?
http ://w w w.supp ortituk.co.uk/#/ima ges/4562009987

Hi!
It is possible, but with slow charge (like from PC USB) and with MTK Application notification displayed.

Will clarify the issue
Will clarify the issue. Can the unit be charged in OTG mode?
USB Host:
(1,3,4,5)
Charge:
7,8 = +5 Power
15-16 = Gnd. Power
ID:
13 = RID_USB_OTG_MODE into GND

Hello,
I am reviving this thread and trying to understand more about it. I have done a chain of resistors, each with 10kOhm. Following USB BC 1.2 FINAL manual, it says that if I put in the 13 pin a resistor with 122-126 it should work, but with a friend worked 66-68. But for me, none is working, not even the 22..26 (?)kOhm one. None is giving me OTG capability. I am takin a wire from pin 13 to the resistors and then connect the other end to ground. Should I connect it only to pin 13? But if I do this, it will became ground later, as this pin is grounded, or not?
Really appreciate some help arround here guys!
Thanks in advance!

USB-C to Ethernet adapter for Mate 9

Hello all,
I'm looking for a USB-C to Ethernet adapter for the Mate 9. I've been searching online to no avail. Can't find one guaranteed to work on Android 7.0. Any suggestion?
Thanks

I've got a Belkin one permanently plugged in on my desk, I'll plug it into my Mate 9 tomorrow and let you know.

Can't see any way to configure it anywhere, and the only indication it's working is a tiny indicator in the status bar, but it does indeed work. Can browse the web and access network shares while in airplane mode.

Thanks, I will give it a try.
mitchello said:
Can't see any way to configure it anywhere, and the only indication it's working is a tiny indicator in the status bar, but it does indeed work. Can browse the web and access network shares while in airplane mode.
Click to expand...
Click to collapse

Would something like this work on the Mate 9? I suspect the Ethernet will but not sure about the USB ports..
Type C 3 Ports Hub with Ethernet Network LAN Adapter USB3.1 With USB 3.0 Ports Fine Workmanship White Cable Free Shipping
http://s.aliexpress.com/aYvQJrYV
(from AliExpress Android)

I ordered this one.
https://www.amazon.com/gp/product/B00ZZ6NW5E/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Thought I would give it a try. It works perfectly. You do have to put the phone in airplane mode just like you said.
MeeMk said:
Would something like this work on the Mate 9? I suspect the Ethernet will but not sure about the USB ports..
Type C 3 Ports Hub with Ethernet Network LAN Adapter USB3.1 With USB 3.0 Ports Fine Workmanship White Cable Free Shipping
http://s.aliexpress.com/aYvQJrYV
(from AliExpress Android)
Click to expand...
Click to collapse

anything special you did for it to work? mine is not working. HELP!
mitchello said:
Can't see any way to configure it anywhere, and the only indication it's working is a tiny indicator in the status bar, but it does indeed work. Can browse the web and access network shares while in airplane mode.
Click to expand...
Click to collapse

Literally just plugged it in, and within moments it received an IP address and was connected.
Just tried it with my P10 Plus, same thing.

USB-C to RJ45 using phone as uplink via cellular to wired client
Just wondering about operation in the reverse direction. Would anyone be so kind as to try it with their USB-C to Ethernet dongle for me?
My use case is to have the phone connected to cellular data, and share the internet connection to a wired computer connected to the RJ45 port.
thanks
Neil

Is there a solutions ?
I connect my Mate 9 over ethernet but i have no connection.
Airplane Mode is enabled.

skyhigh_71 said:
Just wondering about operation in the reverse direction. Would anyone be so kind as to try it with their USB-C to Ethernet dongle for me?
My use case is to have the phone connected to cellular data, and share the internet connection to a wired computer connected to the RJ45 port.
thanks
Neil
Click to expand...
Click to collapse
Hey, did you find out anything about this, I want to do the same thing

Not sure if you can, but wouldn’t it just be easier to do it over WiFi with hotspot? A USB WiFi adaptor for the computer is really cheap if it doesn’t have one.