Warning: Do this at your own risk, I'm not responsible for any damages this may do on your device
This is a tutorial on how to flash Pixel Experience to your Redmi 10X 5G (atom)
Requirements:
- ADB
- Unlocked Bootloader
- vbmeta.img to disable android verified boot, which you can get here: <https://drive.google.com/file/d/1ifnXCIdkqKnk_a1HII9RqQd5CVFWz1xR/view>
- Pixel Experience Rom File, Get it at original thread which is in here: <https://forum.xda-developers.com/t/gsi-unofficial-12-pixel-experience.4354695/>
- Miui Stable Fastboot (V13.0.2.0.SJHCNXM), Get it at original thread which is in here: <https://forum.xda-developers.com/t/miui-updates-tracker-redmi-10x-5g-atom.4266977/>
How to install:
- Reboot the phone to fastboot mode
- Extract Miui Stable Fastboot Rom, then open FlashAll.bat (I'm assuming you use windows here)
- Wait for it to finish
- Do fastboot --disable-verification flash vbmeta vbmeta.img
- Do fastboot reboot fastboot (this should go to fastbootd with blue font on your phone, if not try again)
- Do fastboot erase system
- Do fastboot delete-logical-partition product
- Do fastboot flash system the_name_of_the_pixel_system_image_you_downloaded.img then wait
- Do fastboot reboot recovery to reboot to the stock recovery
- Select the second option in recovery, then select the second option again, then select the second option again (this would do a factory reset)
- Select the first option, then the first option again (this would reboot the system)
Notes:
- I used the version 12.1 v415.1 of pixel experience in this tutorial
- No TWRP needed, as I think the current recoveries we have only supports A11
- What I tested working: WiFi, Headphone Jack, Auto Brightness, Mobile Data, System Stability
- What I tested not working: Fingerprint Sensor
- If I didn't mention something that is working or not, means I haven't tested it enough
- To fix the status bar, Go to Settings -> Phh Treble Settings -> Misc Features -> Set rounded corners diameter -> Type 90 -> Reboot | Alternatively, if you have magisk, you can install the module in the 2nd post
<https://forum.xda-developers.com/t/tutorial-gsi-rom-12-pixel-experience.4485779/#post-87359281>
- If Bluetooth has issues, try to set the bluetooth workarounds at Misc Features to mediatek
- My Misc Features settings is also inlcuded at the screenshots below
- Other than that, feel free to share your experience and experimentation in this thread
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My Misc Features Config:
Update: Aug 29, 2022 (You need Magisk for this)
Until my PR on vendor_hardware_overlay which is in: https://github.com/phhusson/vendor_hardware_overlay/pull/631 (it will reflect on the next builds of the rom)
You can fix the padding and notch by using this magisk module which contains the new files I made which is attached in this comment.
support you
Hello! Have a 10X Pro 5G (bomb) and successfully flashed PE ROM following your tutorial. I wrote the process in my blog post, including screenshots and some problems I encountered. Thank you for your work!
红米 Redmi 10X Pro 5G (bomb) 刷入 Pixel Experience for GSI 教程
kaai.dev
Hi ~ flash success thank you for the tutorial, btw how can I root the phone? I keep bootlooping everytime I tried the twrp & orangefox kindly help me. Thanks!
kurosaberex said:
Hi ~ flash success thank you for the tutorial, btw how can I root the phone? I keep bootlooping everytime I tried the twrp & orangefox kindly help me. Thanks!
Click to expand...
Click to collapse
patch the boot image then flash it via fastboot `fastboot flash boot <name of boot>.img`
Related
HELLO EVERYONEToday I decided to install a GSI on my J4 Core and realized that there are several problems to do this...
After several attempts I was able to install a GSI, so I decided to share here with you.
What you need:
1 - Galaxy J4 Core
2 - USB Cable
3 - PC (Windows or Linux [I use Windows])
4 - Odin (I use v3.13)
5 - GSI Rom (I have tested Phh AOSP Pie and Phh AOSP Android 10, works )
6 - Patience to follow steps
Steps:
1 - Unlock the bootloader on developer options (I think everyone knows how to do that, so I won't give details, ok?)
2 - Download the Force-Encrypt disabler for J4 Core (Google Drive)
3 - Put the phone on download mode (Shutdown, turn on holding Vol+, Reboot to bootloader)
4 - Extract Disable Force-Encrypt J4 Core.tar.xz and flash it on Odin (AP and flash)
* Now your userdata has no force encrypt *
5 - Flash your GSI and Enjoy :highfive:
How to flash a GSI using ODIN, Wilame???
1 - Download your prefered GSI (GSI List)
(I recommend to download the PhHusson Official GSIs)
2 - Download 7zip if you not have
3 - Rename the GSI file .img to system.img.ext4 (the file need to have this exactly name to flash via Odin)
4 - Pack your system.img.ext4 to .tar with 7zip
5 - Flash the .tar file with Odin with AP mode
6 - Enjoy the GSI Rom :fingers-crossed:
*If the system ask a password to boot, make data wipe on recovery or just touch on erase all data if show this on screen*
Printscreens of GSI Running on J4 Core
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
all the gsi that i installed on my j410G have problems with calls from the operator's chips, i don't hear and the person on the other side doesn't hear me. did you face this at your core j4?
Download force encriptação disable nota works, error 404
GDrive File isnt there anymore to download
The gdrive file isnt there anymore can you reupload it? I made a boot.img from my own firmware based region (Argentina) and disabled the encryptation with the magisk patching function but it didnt boot the GSI system i tried many from Phh but no success. Any help will be apreciated and if u reupload the file that might help
Qual imagem
Translated by GT: What image
The guide didn't work for me, only AOSP 8.1 working otherwise it keep boot into download mode
So i search few other guide and finally found the working one
{GUIDE} How install GSI on Any Samsung
REQUIRED CONDITION: YOUR PHONE MUST SUPPORT Project Treble (if you don't know if your phone supports project treble , download Treble Check on Play Market) i installed android 12 gsi on my A70 (a70q) 1) download GSI...
forum.xda-developers.com
1. Unlock bootloader
2. Flash twrp
3. Advanced wipe Dalvik + System + Data + Cache
4. Install GSI image (System image)
5. Install Permissiver_v5.zip file
6. Reboot and enjoy!
This is Master Thread of Doogee N100 Here, I'm sharing everything related to Doogee N100. If I missed anything comment plz.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What's Working:
- Everything
Known Bugs:
- None! (Except for GSI Night light)
-Though you can tell me if you find any.
Patched:
-AVM/Verity-Removed-Boot
-Custom-Recovery-TWRP
-ForceEncrypt-Removed-Vendor
Instructions:
Using the SP Flash tool
- Open flash_tool.exe from sp flash tool folder ( you can download it from here)
- Choose MT6763_Android_scatter.txt from Stock or Patched rom.
- Choose files according to partition, you want to flash. (Every available thing should be deleted automatically. So, you won't have to really select anything).
- Click on Download and Power off your Phone and plug your USB cable.
-Wait to finish and enjoy!
Using Fastboot ( You need Unlocked bootloader & Fastboot to do that)
- Boot up to Fastboot
- Execute:
"fastboot flash boot boot.img"
"fastboot flash recovery recovery.img"
"fastboot flash vendor vendor.img"
- Wait to Finish And Execute "fastboot reboot recovery"
- Enjoy
Downloads:
Stock Rom: Here
Patched Stock;
Boot
Recovery
Vendor
Note: No modification to system or frp in 'Patched' if you want them, download them from stock.
SP Flash Tool link: Here
[You can use SP Flash Tool to flash Patched or stock img with scatter file, provided with both Stock and Patched Rom]
GSI:
Select any GSI you want from Here
[Just select Arm64-A/B Variant]
XDA:DevDB Information
Dogee N100 all ROM patches with Stock, ROM for all devices (see above for details)
Contributors
Cyberavater
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2020-06-20
Last Updated 2020-06-20
Reserved
Reserved 2
I am thinking of buying this cell phone. It, in android 10 gsi, the battery lasts longer than in stock rom?
caikehenrique said:
I am thinking of buying this cell phone. It, in android 10 gsi, the battery lasts longer than in stock rom?
Click to expand...
Click to collapse
I'ven't tested it's full charge life in single rom let alone multiple (it takes a long time to finish its full charge). But in theory, the stock should last more as it's specifically built for the device (same goes for any device).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Im am not responsible for any bugs / damages caused by flashing gsi . Im just making a guide so that users can benefit. Always take backup of your data for safety.
Click to expand...
Click to collapse
Downloads :
GSI ( download Arm64 AB ) : https://forum.xda-developers.com/pr...e-development/havoc-os-3-3-gsi-archs-t4076903
Vbmeta : https://drive.google.com/file/d/1myIdmmJXzM8YqrZjbcIKWIZ7Q8eOukQX/view?usp=drivesdk
How to flash gsi on realme 6 pro :
1) Firstly, Enter the fastboot mode ,
From adb , type the following command,
Code:
adb reboot fastboot
This will reboot into recovery(fastbootd) mode . Press OK.
2) After entering fastbootd mode ,
Code:
fastboot flash system gsifile.img
fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
fastboot reboot bootloader
fastboot -w
fastboot reboot
Warning : fastboot -w will wipe entire phone storage. So take a backup before doing anything
Done. Now enjoy android 10 gsi on realme 6 pro
Screenshots
F.A.Q
•
Bugs
• Volte
Enable device specific features :
By default, some of our device features come disabled, lets change it
• Go to Settings
• Open Phh Treble Settings
• Open Oppo features
- Select Enable DT2W (Double tap to wake)
- Select Enable Game Mode
- Select Enable USB OTG
• Open Misc features
- Select Expose Aux cameras
- Select Force Enable Camera2API HAL
Enable 90HZ :
• Go to Settings
• Open Phh Treble Settings
• Open Misc features
• Select Force FPS
-Choose 90.0 (or 60.0 if you don't want 90hz)
Good job!!
Can i skip adb reboot fastboot command if my phone is visible in fastboot devices
app clone
is the app clone available?
muzes said:
is the app clone available?
Click to expand...
Click to collapse
What did you mean?
App clone feature as in realme ui ??
If that's the case, aosp won't have it. You need to use third party apps from playstore.
https://play.google.com/store/apps/details?id=com.polestar.super.clone
This is what I use. You can create multiple clones of an app
Does anyone tried this rather than the Author?
Did it work?
How's the camera, does it supports 64 mp?
Thanks in advance.
if i flash this gsi can i root my phone and will my fingerprint still be working?
mohsinmughal011 said:
if i flash this gsi can i root my phone and will my fingerprint still be working?
Click to expand...
Click to collapse
Not likely since twrp flash isn't working...
can we install other gsi
like this
My realme 6 Pro says it's A only
what is volte bug ? is that mean we cant use 4g connection ?
no one has tried this other than the author because the instruction are unclear
gogobo1 said:
no one has tried this other than the author because the instruction are unclear
Click to expand...
Click to collapse
So far so late, yet, it doesn't works anyways, and a little too buggy and has no vivid option for screen color.
Yasahiro24 said:
So far so late, yet, it doesn't works anyways, and a little too buggy and has no vivid option for screen color.
Click to expand...
Click to collapse
I wish it was working because realme ui kinda sucks
hey bro same here from indonesia, can i use your vbmeta to my RM Narzo?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OrangeFox Recovery for the Xiaomi Mi Mix 3 [perseus]
Mi MIX 3 Telegram Global Community
Spoiler: --Warranty Advice--
_________________________________________________________
Your warranty is void.
I am not responsible for bricked devices or
thermonuclear war caused by you following
these directions. YOU are choosing to make these modifications.
_________________________________________________________
OrangeFox Recovery is one of the most popular custom recoveries, with amazing additional features, fixes and a host of supported devices.
-IMG Method-
1. Download the OrangeFox Recovery img on your PC.
2. Reboot your phone to bootloader (adb reboot bootloader).
3. Enter this command: fastboot flash recovery recovery.img.
4. Reboot to recovery.
Enjoy.
-Flashable zip method-
1. Download the OrangeFox Recovery flashable zip on your PC.
2. Reboot your phone to recovery.
3. Locate and flash the zip.
4. Reboot to recovery.
Enjoy.
OrangeFox version: r11
For device: Xiaomi Mi Mix 3 [perseus]
Maintainer/Authors build: Jopii
OrangeFox Source Code: https://gitlab.com/OrangeFox
Device tree: https://github.com/TeamWin/android_device_xiaomi_perseus
Credits to:
@PriNcEFuL
@mauronofrio
Twrp Team
Last Updated 2021-03-22
---------------------------------------------------
Recovery changes :
==============================
r11
- Merged R10.2 changes
- Merged latest TWRP changes
- Match Android Q design guidelines
- Gesture navigation
- Multiselection: supports copying, moving, deleting multiple files
- View size and date of files in file explorer
- Show backup size when selecting partitions and predicted average time of backup
- Tap on title in file manager to open storage menu
- Tap 3-dot icon to access multiselection and file manager settings
- Gray theme replaced with theme from Google Clock
- New fonts: MI LanPro (MIUI Font), Euclid, Fira Code, Exo 2
- Font weight customization
- Full screen console
- Add brightness slider and flashlight to console
- Quickly add Magisk when installing ZIPs
- Use checkboxes to input chmod permissions like in Android file managers
- Splash redesign, simple splash customizator
- Fancy decryption page
- Better UX while searching
- Generate digests after backup
- Advanced security: ADB and MTP unaccessible during boot (on some devices)
- Ability to flash ramdisk/kernel and fix recovery bootloop (for AB devices)
- Magisk improvements, removed Magisk v18 support
- Added hints
- Many others UI/UX fixes and improvements
==============================
---------------------------------------------------
Reserved
I've already compiled it for personnal use and never thought I could share it. Well now it's done, potentially better than I did (where's the thanks button tho ?)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void!!!
*
* If sh!t happens, i am not responsible for your bricked device.
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications,
* Do at your own risk!!!
*/'
Team Win Recovery Project 3.7.0 forRealme Narzo 30 Pro 5GIntroduction:Team Win Recovery Project, is an open-source software custom recovery
image for Android-based devices. It provides a touchscreen-enabled
interface that allows users to install third-party firmware and back up the
current system which are functions often unsupported by stock recovery.Version and device Information:
Status -Stable Unofficial
Based on TWRP version: 3.7.0
Device: Realme Narzo 30 Pro 5G
Codename: athensb/athensc/athensd
Android version: android-12+, RUI 3
Release Date: 09 May 2023
Last Updated:
Maintainer: Shibu Shaji
Installation:1.Disable verified boot first (optional)
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
'Which is extracted from current stock rom ozip file.'
2. Flash twrp build.
Code:
fastboot flash recovery <twrp-image>.img
3. Reboot to recovery
Code:
fastboot reboot recovery
List of features working:• Support Decryption for Android 12 (tested and works with stock firmware and some available GSI roms)
• External SD Card & USB-OTG[
• Successful installation of flashable .zips, Magisk (Custom rom not tested as it is not available now)
• Additional features such as close AVB2.0. (disabled-verify on vbmeta)
• Working mounting/unmounting of Dynamic partitions (r/o only)
• Fully functional Backup/Restore of all partitions.
• ADB/MTP/fastbootd.Features not working:-Test and tell meh.Note:• If you got 'unable to mount /data' error or Bootloop after flashing a ROM or having done a Format Data do the below.
Boot to bootloader and:
Code:
fastboot devices
fastboot -w
fastboot reboot
Changelogs:
• Updated sources
Click to expand...
Click to collapse
Downloads:
twrp-3.7.0_12-Stable-Unofficial-RMX2117.img
Credits:• The TWRP Team
128 MB file on MEGA
mega.nz
Hello.
I tried this and everything went smoothly ... ,
but my device is not supporting the Twrp Recovery. It is showing some glitched display.
I can boot my device normally but I can't enter normal recovery mode.
Can you guide me to fix it please. I just want to restore my recovery mode to default !