Development [ROM][UNOFFICIAL][GAPPS] Evolution X 7.8

Development [ROM][UNOFFICIAL][GAPPS] Evolution X 7.8 - Motorola Moto G100 / Edge S

Evolution X 7.x for the Moto edge S / Moto g100 [nio]
Code:
/*
* Your warranty is void. Or valId, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modifications, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Keep Evolving
Pixel UI, customization, and more, we are Evolution X!
- Team Evolution X -
@joeyhuab
@RealAkito
@AnierinB
Reach us on Twitter! @EvolutionXROM
Just flash and check "The Evolver". We have tons of features combined together from different ROMs.
You tell me
DO NOT FLASH GAPPS, ALREADY INCLUDED
From another custom rom:
1. Download copyparts zip and ROM zip and place in your adb folder on pc
2. Reboot to recovery
3. Select apply update from adb and in a cmd window type:
adb sideload copyparts.zip
4. Select apply update from adb again and type:
adb sideload (rom filename).zip
5. Factory reset in recovery after installation
From stock rom:
1. Download rom.zip, copyparts.zip and recovery.img and place in your adb folder on pc
2. Reboot to bootloader and install recovery:
fastboot flash boot recovery.img
3. Then use the volume buttons and power to navigate to and enter recovery
4. Select apply update from adb and in a cmd window type:
adb sideload copyparts.zip
5. Select apply update again once finished and type:
adb sideload (rom filename).zip
6. Factory reset in recovery after installation.
Dirty Flash from previous Evolution X 7.x version:
1. Download rom.zip and place in your adb folder on pc
2. Reboot to recovery
3. Select apply update from adb and in a cmd window type:
adb sideload (filename).zip
4. Reboot, Profit
DOWNLOAD
DONATE
DEVICE SUPPORT

Android OS version: 13
Security patch level: April 2023
Build author: Beetle84
Source code: https://github.com/Evolution-X
Kernel Source code: https://github.com/LineageOS/android_kernel_motorola_sm8250/tree/lineage-20
ROM Developer: Joey Huab
XDA: DevDB Information
Evolution X, ROM for the Moto edge S / Moto g100
ROM OS Version: Android 13
ROM Kernel: Linux 4.19.157
Based On: AOSP
Special thanks to William (@menorziin) and Maicon (@MaiconHenriquee) from telegram for their assistance.

reserved

Oh, this is awesome!
THX for your hard work!
BTW, I heard that we can update from Evo 6.7 to 7.0 with dirty-flash method.
Can I try it with official build?
And/or should I flash the new recovery image too?

michael_hamada said:
Oh, this is awesome!
THX for your hard work!
BTW, I heard that we can update from Evo 6.7 to 7.0 with dirty-flash method.
Can I try it with official build?
And/or should I flash the new recovery image too?
Click to expand...
Click to collapse
You can try to dirty flash it, i havent tried personally, but someone said its working fine.
And you wont need the recovery, its the same one as you have already

Magisk will cause a bootloop if installed, i'll look into it

Beetle84 said:
Magisk will cause a bootloop if installed, i'll look into it
Click to expand...
Click to collapse
Wow, that's too bad. I can't live without Magisk
THX for the info anyway.

michael_hamada said:
Wow, that's too bad. I can't live without Magisk
THX for the info anyway.
Click to expand...
Click to collapse
WEird - never heard of Magisk killing anyone before

Beetle84 said:
Evolution X 7.x for the Moto edge S / Moto g100 [nio]
Code:
/*
* Your warranty is void. Or valId, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modifications, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
Keep Evolving
Pixel UI, customization, and more, we are Evolution X!
- Team Evolution X -
@joeyhuab
@RealAkito
@AnierinB
Reach us on Twitter! @EvolutionXROM
Just flash and check "The Evolver". We have tons of features combined together from different ROMs.
Magisk will cause a bootloop... Dont install for now
You tell me
DO NOT FLASH GAPPS, ALREADY INCLUDED
From custom rom:
1. Download copyparts zip and ROM zip and place in your adb folder on pc
2. Reboot to recovery
3. Select apply update from adb and in a cmd window type:
adb sideload copyparts.zip
4. Select apply update from adb again and type:
adb sideload (rom filename).zip
5. Factory reset in recovery after installation
From stock rom:
1. Download rom.zip, copyparts.zip and recovery.img and place in your adb folder on pc
2. Reboot to bootloader and install recovery:
fastboot flash boot recovery.img
3. Then use the volume buttons and power to navigate to and enter recovery
4. Select apply update from adb and in a cmd window type:
adb sideload copyparts.zip
5. Select apply update again once finished and type:
adb sideload (rom filename).zip
6. Factory reset in recovery after installation.
DOWNLOAD
DONATE
DEVICE SUPPORT

Android OS version: 13
Security patch level: August 2022
Build author: Beetle84
Source code: https://github.com/Evolution-X
Kernel Source code: https://github.com/LineageOS/android_kernel_motorola_sm8250/tree/lineage-19.1
ROM Developer: Joey Huab
XDA: DevDB Information
Evolution X, ROM for the Moto edge S / Moto g100
ROM OS Version: Android 13
ROM Kernel: Linux 4.19.157
Based On: AOSP
Special thanks to William (@menorziin) and Maicon (@MaiconHenriquee) from telegram for their assistance.
Click to expand...
Click to collapse
Insrtall underway!!!! I can live without Magisk

Headphone jack doesn't seem to work. Atleast when I use it as AUX out. Really really smooth running ROM so far

hawki said:
So far, so great!!! No "Black" mode from what i can find. Will post as i notice other thing. Thank you do much!!!!
Click to expand...
Click to collapse
Not added yet, the devs are adding things daily so hopefully wont be long.

hawki said:
Headphone jack doesn't seem to work. Atleast when I use it as Aux out. Really really smooth runningROM so far
Click to expand...
Click to collapse
Hmm, i'll have to try it, thanks

As a work around for now, you can adb sideload magisk v23 (rename the .APK to .zip).
After that you can update the manager to 25.2, but DONT UPDATE MAGISK ITSELF, or you WILL bootloop.
Release Magisk v23.0 · topjohnwu/Magisk
This release is focused on fixing regressions and bugs. Note: Magisk v22 is the last major version to support Jellybean and Kitkat. Magisk v23 only supports Android 5.0 and higher. Bug Fixes [App]...
github.com

so hmm do we really need the recovery and also can someone confirm if we can just update from 6.7?

BLUEPOP said:
so hmm do we really need the recovery and also can someone confirm if we can just update from 6.7?
Click to expand...
Click to collapse
Maybe I will find out tomorrow....

Also does recovery mean fastboot? I'm a bit confused

BLUEPOP said:
Also does recovery mean fastboot? I'm a bit confused
Click to expand...
Click to collapse
Maybe not.
'Cause these zip files won't be flashed by fastboot command.

michael_hamada said:
Maybe not.
'Cause these zip files won't be flashed by fastboot command.
Click to expand...
Click to collapse
So we need twrp for this?

BLUEPOP said:
so hmm do we really need the recovery and also can someone confirm if we can just update from 6.7?
Click to expand...
Click to collapse
If you are coming from stock firmware or another rom, yes you need it.
If you are on evo x v6.7, you already have the same recovery installed.
You can try to update without the factory reset, no guarantees though.

Beetle84 said:
If you are coming from stock firmware or another rom, yes you need it.
If you are on evo x v6.7, you already have the same recovery installed.
You can try to update without the factory reset, no guarantees though.
Click to expand...
Click to collapse
I don't remember doing anything with recovery all I did was flash the ROM zip with fastboot, also could u maybe put the adb you use in the downloads?

Related

[ROM][UNOFFICIAL] LineageOS 18.0 for Sharp Aquos S2 [SS2] [11.0]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android 11.x (R),
which is designed to increase performance and reliability over stock Android for your device.
All the source code for LineageOS is available in the LineageOS GitHub repo.
And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Official LineageOS website : http://lineageos.org
About LineageOS Legal : http://lineageos.org/legal/
Important Information
1. For VoLTE, you need to enable it on stock firmware, then flash this modem via fastboot. Download link
Code:
fastboot flash modem_a modem.img
fastboot flash modem_b modem.img
Downloads Links
LineageOS 18.0:
Unofficial-build: Link
LineageOS 17.1:
Unofficial-build: Link
Notice: For LineageOS 17.1, if you doesn't have signal, please flash heineken78's treble 5.3 and my modem. REMEMBER, you need to get singal on treble 5.3 at first, then flash LineageOS 17.1.
Google Applications (optional):
You need to find the one for Android 11.
Flashing and updating
How to flash
Make sure you upgraded to Official Android 8.1 from Sharp
Unlock bootloader is necessary.
You could flash 20201010 version via fastboot.
Root access:
Flash Magisk in recovery via adb sideload.
XDA:DevDB Information
Lineage 18.0 for Sharp S2, ROM for the Sharp S2
Thanks for heineken78's work of camera blobs on his LineageOS 17.1 build.
Source
Source Code: https://github.com/LineageOS
Device-tree: https://github.com/sharp-sdm660
ROM OS Version: Android 11
ROM Kernel: Linux 4.4
ROM Firmware Required: Official Android 11.0 firmware
Based On: LineageOS
Version Information
Status: Testing
Created 2020-10-10
Last Updated 2020-11-13

FEATURES AND ISSUES
Code:
- Boot: Ok
- Bluetooth: Ok
- WiFi: Ok
- WiFi Hotspot: Ok
- Wireless display: Not-tested
- RIL - Phone - Data: Ok
- VoLTE: Ok
- GPS: Ok
- Camera: Ok
- Camcorder: Ok
- Lights: Ok
- MicroSD: Not-tested
- Accelerometer: Ok
- Compass: Ok
- Gyroscope: Ok
- QTI sensors: Ok
- Touchscreen: Ok
- FM Radio: NA
- Fingerprint: Ok
- Vibrator: Ok
- Microphone: Ok
- Audio & music: Ok
- Bluetooth audio: Ok
- NFC: Ok
- Kernel: Ok
- Graphics: Ok
- 3D Rendering: Ok
- Clock: Ok
- DRM: Widewine L3
- Offline Charging: No
- USB: Ok
- USB Tethering: Ok
- USB OTG: Ok
- Encryption: Ok
- SEPolicies: Enforce

Bluetooth audio: connect to the headphones but doesn't work

stillka said:
Bluetooth audio: connect to the headphones but doesn't work
Click to expand...
Click to collapse
Thanks for feedkback, this should be because of LineageOS 18.0' source is not completed. I will check it when compile again.

@Sjll, thank you for LOS 18. Am noting some comments about it on the largest Sharp S2 4pda.ru forum, particularly compared to the widely used @heineken78 LOS 17.1. Integrating TWRP recovery would be appreciated.
Usual TWRP recovery is missing
Recovery is different. It is necessary to put something like a gaps through a fastboot
recovery is similar to stock
Can someone sew custom recovery into the bottle from Los 18? In the Los 18 boot stock recovery.
just need to put the boot from LOS 17.1, the firmware has a standard recovery
Click to expand...
Click to collapse
Google Pay not working
Google playmarket error constantly: the device is not certified
If you make a format after installing gaps, it starts, but the device does not write certified
Click to expand...
Click to collapse

paulzie said:
@Sjll, thank you for LOS 18. Am noting some comments about it on the largest Sharp S2 4pda.ru forum, particularly compared to the widely used @heineken78 LOS 17.1. Integrating TWRP recovery would be appreciated.
Usual TWRP recovery is missing
Google Pay not working
Click to expand...
Click to collapse
No problem, For twrp, I think there is a hot-boot version if you googled it. Link
If necessary, I will build one for S2.
Try
Code:
fastboot boot twrp.img
About Gpay and other bugs, we need to wait for LineageOS fix them.
BTW, if someone could catch a log on SAT(sdm660), I will try to fix LineageOS 18.0 on it.
Method:
1. Flash LineageOS 18.0 by fastboot.
2. Hot-boot into twrp, then format data.
3.
Code:
adb push adbkey.pub /data/misc/adb/adb_keys
For Linux, adbkey.pub is in
Code:
cd ~/.android
For Windows, it is in
Code:
C:\Users\<YOUR USER NAME>\.android
4. Reboot, catch a full log
Code:
adb logcat -b all > sat.txt

Sjll said:
About Gpay and other bugs, we need to wait for LineageOS fix them.
Click to expand...
Click to collapse
Hi there is no Lineage fixes for Gpay.
Gpay has dependencies from props and selinux status, even official Lineage will fail Gpay checks.
Gpay is only for locked device and stock rom or look for solution with Magisk.

heineken78 said:
Hi there is no Lineage fixes for Gpay.
Gpay has dependencies from props and selinux status, even official Lineage will fail Gpay checks.
Gpay is only for locked device and stock rom or look for solution with Magisk.
Click to expand...
Click to collapse
KK, other people told me Gpay is supported if we could pass safetynet. But I could not test it because Gpay is not available for me.

Sjll said:
KK, other people told me Gpay is supported if we could pass safetynet. But I could not test it because Gpay is not available for me.
Click to expand...
Click to collapse
Hello, I installed your firmware. I tried to put google through bitegapps, the device is not certified. You can solve the problem with google to further study the firmware.

Noticed a new lineage-18.0-20201019-UNOFFICIAL-SS2.zip (Oct-19) download is available. Any feedback for the developer?

heineken78 said:
Hi there is no Lineage fixes for Gpay.
Gpay has dependencies from props and selinux status, even official Lineage will fail Gpay checks.
Gpay is only for locked device and stock rom or look for solution with Magisk.
Click to expand...
Click to collapse
Hi. I flashed your Lineage 17.1 rom for Sharp S3 from scratch, without any fixes and so on, just flashed Gapps and Gpay works without any problems. No magisk or any tools are installed. Is this fine?

@Angel_666, there is a dedicated thread you may consider directing your @heineken78's LOS17.1 query to:
Lineage 17.1 *UNOFFICIAL* for FIH (SAT/SS2/HH1/HH6/HD1/DRG)

New version uploaded.
@stillka Bluetooth-audio fixed. :

@Sjll , thank you for the new build. Are there any other changes here for previous mentioned issues?
- integrated TWRP recovery
- Gapps "not certified" fix
- Gpay working?
- SAT (SDM660 6/128GB) support

Sjll said:
New version uploaded.
@stillka Bluetooth-audio fixed. :
Click to expand...
Click to collapse
Hi,
the ROM is packaged in .zip, inside is "payload.bin", HOW should I flash it?!
Thank you.

paulzie said:
@Sjll , thank you for the new build. Are there any other changes here for previous mentioned issues?
- integrated TWRP recovery
- Gapps "not certified" fix
- Gpay working?
- SAT (SDM660 6/128GB) support
Click to expand...
Click to collapse
Hi, for twrp, there is a standalone one, after I solved some issues left, I will release it. If you need built-in twrp. You could install it manually.
For gapps, you need to ask other people, I do not know the meaning.
For SAT, I only have a sdm630 S2, I will try to solve it if I have time.
stillka said:
Hi,
the ROM is packaged in .zip, inside is "payload.bin", HOW should I flash it?!
Thank you.
Click to expand...
Click to collapse
Flash the old fastboot version.
Enable adb debug, then run
Code:
adb reboot recovery
You will boot into Lineage rec.
Choose apply update, then adb sideload the new zip.

Sjll said:
Flash the old fastboot version.
Enable adb debug, then run
Code:
adb reboot recovery
You will boot into Lineage rec.
Choose apply update, then adb sideload the new zip.
Click to expand...
Click to collapse
I downloaded older version but its same format, can you give me link for that oldest initial version (which I tested first time..)
Sent from my Mi MIX 2S using Tapatalk

stillka said:
I downloaded older version but its same format, can you give me link for that oldest initial version (which I tested first time..)
Sent from my Mi MIX 2S using Tapatalk
Click to expand...
Click to collapse
The oldest version is v20201010-fastboot.

Sjll said:
The oldest version is v20201010-fastboot.
Click to expand...
Click to collapse
Hi, thanks, I am on latest release now, but I was not able to find gapps which can be flashed using adb sideload and works, can you recommend working gapps version?
(or how to flash gapps?)
p.s: I had to flash gapps again because first time it flashed to wrong slot (_a/_b), now I have gapps, I am getting to test the rom...

So, I cant use google store - This device isn't play protect certified.....

[RECOVERY][OFFICIAL][Cereus][v3.0.0] Pitch Black Recovery [TWRP 3.4.0]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.4.0
PitchBlack version: 3.0.0
For device: Cereus
Maintainer/Authors build: Erwin Abs
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
Kernel: https://github.com/xiaomi-mt6765
PitchBlack Team: @rezaadi0105, @shovon, @manjot.gni, @androiabledroid, sagar
Features
Fully native android like UI
Supports Treble and non-Treble ROMs
Up-to-date kernel, built from sources
Full dark theme with changeable accents
Reorganized menus
MIUI OTA support
Disable DM Verity
Use AromaFM as default file manager
Various tools are include
Universal flash-able file for all variant of a device
Many bug fixes & optimization & much more
Click to expand...
Click to collapse
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
From PC
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP zip
Goto fastboot mode in your device
Flash the recovery.img by fastboot flash recovery.img
Boot into PBRP
Copy the zip to internal storage
Flash it
Enjoy
Changelog
PBRP Side Changelog
Code:
v3.0.0
- Fully Redesigned UI
- Added new Keychecks While Flashing PBRP or recovery.img or Ramdisk
- Fully Redesigned Website https://pitchblackrecovery.com
- New Android like Power Menu (Activated via power key hold)
- Flashlight toggled by Vol up(+) on hold
- New Scrollable Advanced menu
- Totally Redesigned Icons
- Removed old unnecessary Theming Stuff
- Tested on almost all handy Resolutions
- Flashlight toggle on Lockscreen
- More checks for SAR/Non-SAR
- New Navbar
- Support on almost all Android version (5.0+)
- Update ozip decrypt
- Fix up ozip print logs & take all paths
- Update FUNDING.yml
- Fixed encrypted removal checks & buttons
- Add Flag for disabling treble compatibility by default
- Is_Data_Wiped: Simplify function signature
- Unified AB_OTA_UPDATER
- Change AB device log storage to /data/recovery
- Delay start if specified in board
- Optimize touchscreen driver initialization delay.
v3.0
- Update kernel
- Update DM Verity Logic
- Update magisk
- Update unroot magisk
- Some bug fixed
Device Side Changelog
Code:
Bugs
- You tell me!
Downloads
Flashable zip
https://pitchblackrecovery.com/cereus
XDA:DevDB Information
PitchBlack Recovery Project, Tool/Utility for the Xiaomi Redmi 6
Contributors
Erwin Abs
Version Information
Status: Stable
Created 2020-10-29
Last Updated 2020-10-30

Notes: specifically in miui based on android 9!! (not recommended on oreo base firmware)
If you were on Twrp before Just Install flashable zip and press volume up for automatic reboot

I want process to flash the recovery to my device. My phone got Hard bricked because of arb protection. Can i get help? Please

Aadharsh.1 said:
I want process to flash the recovery to my device. My phone got Hard bricked because of arb protection. Can i get help? Please
Click to expand...
Click to collapse
Flash recovery.img stock miui oreo from fastboot

Erwin Abs said:
Flash recovery.img stock miui oreo from fastboot
Click to expand...
Click to collapse
No. I mean that i got hard bricked. No recovery, no fastboot, dead screen with constantly vibration (non stop). I got repaired my phone from the service centre since edl was blocked. I want do not want to get bricked again. I just want to know how do you flash it. Some says to flash it normally (fastboot flash recovery.img), some says to flash dummy.img for arb bypass, some says to boot the recovery(fastboot boot recovery.img) and flash the recovery from the recovery itself. I am just confused here. I don't want to get bricked again. I just want to know how did you flash without any problem. ARB protection is the main problem here. I tried to flash PB recovery. The fastboot command says it was successful and when i reboot to recovery, only stock recovery was there. So i tried to flash twrp(official one from twrp page), i got bricked cause of arb.

Can I install twrp on miui 11.0.5.0 android 9. I am afraid the phone will get bricked

sayad1 said:
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.2.3
PitchBlack version: 2.9.0
For device: tulip
Maintainer/Authors build: @rezaadi0105 @sayad1
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
Device tree: https://github.com/rezaadi0105/android_device_xiaomi_tulip-twrp
[*]Kernel: Give kernel link here, remove this line if you are using prebuilt kernel
[*]PitchBlack Team: @rezaadi0105, @firewolfxda, @manjot.gni, @androiabledroid, Arbaz Khan
Features
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
from PC (Windows & Linux)
Download PBRP PC Installer zip from bellow
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP PC installer zip & copy the flashable zip to the installer folder
Goto fastboot mode in your device
Windows users open pbinstaller.bat file
Linux users execute pbinstaller.sh in a terminal
Follow the introductions on the installer from there
Enjoy
(LInux users will need unzip, adb & fastboot installed on their system)
changelog
Code:
v2.9.0
- Update kernel
- Update DM Verity Logic
- Update magisk
- Update unroot magisk
- Some bug fixed
flashable zip
download link here
2019.1.27
https://sourceforge.net/projects/pi...lip-2.9.0-20181211-1618-OFFICIAL.zip/download
Telegram :- https://t.me/tulipofficial
pC INSTALLER
https://sourceforge.net/projects/pi...ller/PB_Installer_20181014_ALPHA.zip/download
Click to expand...
Click to collapse
Erwin Abs said:
Flash recovery.img stock miui oreo from fastboot
Click to expand...
Click to collapse
Erwin Abs said:
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.4.0
PitchBlack version: 3.0.0
For device: Cereus
Maintainer/Authors build: Erwin Abs
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
Kernel: https://github.com/xiaomi-mt6765
PitchBlack Team: @rezaadi0105, @shovon, @manjot.gni, @androiabledroid, sagar
Features
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
From PC
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP zip
Goto fastboot mode in your device
Flash the recovery.img by fastboot flash recovery.img
Boot into PBRP
Copy the zip to internal storage
Flash it
Enjoy
Changelog
PBRP Side Changelog
Code:
v3.0.0
- Fully Redesigned UI
- Added new Keychecks While Flashing PBRP or recovery.img or Ramdisk
- Fully Redesigned Website https://pitchblackrecovery.com
- New Android like Power Menu (Activated via power key hold)
- Flashlight toggled by Vol up(+) on hold
- New Scrollable Advanced menu
- Totally Redesigned Icons
- Removed old unnecessary Theming Stuff
- Tested on almost all handy Resolutions
- Flashlight toggle on Lockscreen
- More checks for SAR/Non-SAR
- New Navbar
- Support on almost all Android version (5.0+)
- Update ozip decrypt
- Fix up ozip print logs & take all paths
- Update FUNDING.yml
- Fixed encrypted removal checks & buttons
- Add Flag for disabling treble compatibility by default
- Is_Data_Wiped: Simplify function signature
- Unified AB_OTA_UPDATER
- Change AB device log storage to /data/recovery
- Delay start if specified in board
- Optimize touchscreen driver initialization delay.
v3.0
- Update kernel
- Update DM Verity Logic
- Update magisk
- Update unroot magisk
- Some bug fixed
Device Side Changelog
Code:
Bugs
- You tell me!
Downloads
Flashable zip
https://pitchblackrecovery.com/cereus
XDA:DevDB Information
PitchBlack Recovery Project, Tool/Utility for the Xiaomi Redmi 6
Contributors
Erwin Abs
Version Information
Status: Stable
Created 2020-10-29
Last Updated 2020-10-30
Click to expand...
Click to collapse
Please reply soon for my problem i have posted already. I am depending on your method

Aadharsh.1 said:
introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.2.3
PitchBlack version: 2.9.0
For device: tulip
Maintainer/Authors build[email protected]
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
Device tree: https://github.com/rezaadi0105/android_device_xiaomi_tulip-twrp
Kernel: Give kernel link here, remove this line if you are using prebuilt kernel
PitchBlack Teamrezaadi0105, @firewolfxda, @manjot.gni, @androiabledroid, Arbaz Khan
Features
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
from PC(Windows & Linux)
Download PBRP PC Installer zip from bellow
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP PC installer zip & copy the flashable zip to the installer folder
Goto fastboot mode in your device
Windows users open pbinstaller.bat file
Linux users execute pbinstaller.sh in a terminal
Follow the introductions on the installer from there
Enjoy
(LInux users will need unzip, adb & fastboot installed on their system)
changelog
Introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.4.0
PitchBlack version: 3.0.0
For device: Cereus
Maintainer/Authors build: Erwin Abs
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
Kernel:https://github.com/xiaomi-mt6765
PitchBlack Teamrezaadi0105, @shovon, @manjot.gni, @androiabledroid, sagar
Features
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
From PC
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP zip
Goto fastboot mode in your device
Flash the recovery.img by fastboot flash recovery.img
Boot into PBRP
Copy the zip to internal storage
Flash it
Enjoy
Changelog
PBRP Side Changelog
Please reply soon for my problem i have posted already. I am depending on your method
Click to expand...
Click to collapse
Just install zip, only for firmware miui Pie

tranluc123 said:
Can I install twrp on miui 11.0.5.0 android 9. I am afraid the phone will get bricked
Click to expand...
Click to collapse
This has been tested on Miui Pie firmware

Aadharsh.1 said:
No. I mean that i got hard bricked. No recovery, no fastboot, dead screen with constantly vibration (non stop). I got repaired my phone from the service centre since edl was blocked. I want do not want to get bricked again. I just want to know how do you flash it. Some says to flash it normally (fastboot flash recovery.img), some says to flash dummy.img for arb bypass, some says to boot the recovery(fastboot boot recovery.img) and flash the recovery from the recovery itself. I am just confused here. I don't want to get bricked again. I just want to know how did you flash without any problem. ARB protection is the main problem here. I tried to flash PB recovery. The fastboot command says it was successful and when i reboot to recovery, only stock recovery was there. So i tried to flash twrp(official one from twrp page), i got bricked cause of arb.
Click to expand...
Click to collapse
if you are on twrp LR mod just install zip and press volume up to reboot into auto recovery

Erwin Abs said:
Flash recovery.img stock miui oreo from fastboot
Click to expand...
Click to collapse
Erwin Abs said:
if you are on twrp LR mod just install zip and press volume up to reboot into auto recovery
Click to expand...
Click to collapse
I am on stock rom. Does nothing happenes if i just flash normally? Also do i need to flash any zips like disable force encryption, lazyflasher,etc after successfully flashed PB

Erwin Abs said:
This has been tested on Miui Pie firmware
Click to expand...
Click to collapse
Then can you root android 9 miui 11.0.5.0?

Beta Build UP
Changelog:
- Initial Unified Redmi 6/6A
- Add Arm64 Support
- Drop Critical Partitions
- Based on TWRP 3.5.2
- Decrypt Need TEST.
https://sourceforge.net/projects/pbrp/files/cactus/PBRP-cactus-3.1.0-20210817-0331-BETA.zip/download

Aadharsh.1 said:
No. I mean that i got hard bricked. No recovery, no fastboot, dead screen with constantly vibration (non stop). I got repaired my phone from the service centre since edl was blocked. I want do not want to get bricked again. I just want to know how do you flash it. Some says to flash it normally (fastboot flash recovery.img), some says to flash dummy.img for arb bypass, some says to boot the recovery(fastboot boot recovery.img) and flash the recovery from the recovery itself. I am just confused here. I don't want to get bricked again. I just want to know how did you flash without any problem. ARB protection is the main problem here. I tried to flash PB recovery. The fastboot command says it was successful and when i reboot to recovery, only stock recovery was there. So i tried to flash twrp(official one from twrp page), i got bricked cause of arb.
Click to expand...
Click to collapse
I also facing this issue now. I flash two different ROMs and no one boot up, so i think if it is related to recovery issue, and i downloaded twrp.img and flash it via PB and restart to new recovery. And now it keeps vibration. I'll try to find a way to maye it survive, but i cant stop it from vibrating. its really noisy.

Jackboy2 said:
I also facing this issue now. I flash two different ROMs and no one boot up, so i think if it is related to recovery issue, and i downloaded twrp.img and flash it via PB and restart to new recovery. And now it keeps vibration. I'll try to find a way to maye it survive, but i cant stop it from vibrating. its really noisy.
Click to expand...
Click to collapse
Even when I flashed twrp in Redmi Y2/S2, the phone got bricked. But the phone can boot twrp successfully. So i just flashed a custom rom.
Anyways, i gave up both the phones and bought a new one. I flashed xiaomi.eu and I'm satisfied with that.

Jackboy2 said:
I also facing this issue now. I flash two different ROMs and no one boot up, so i think if it is related to recovery issue, and i downloaded twrp.img and flash it via PB and restart to new recovery. And now it keeps vibration. I'll try to find a way to maye it survive, but i cant stop it from vibrating. its really noisy.
Click to expand...
Click to collapse
Well, idk but i think the only way to revive the phone is to flash the rom in edl mode with sp flash tool. Just remove your back cover, disconnect the fingerprint and battery. Now open the sp flash tool and select the rom to be flashed and it will wait for the device to connect.
Now hold volume down and connect the usb to enter into edl mode.
But the problem is, Xiaomi blocked the access for edl flashing. You'll require an auth file and authorised mi account.
I tried this tutorial a way long back. Maybe now there could be a way to bypass with a modified auth file.

Jackboy2 said:
I also facing this issue now. I flash two different ROMs and no one boot up, so i think if it is related to recovery issue, and i downloaded twrp.img and flash it via PB and restart to new recovery. And now it keeps vibration. I'll try to find a way to maye it survive, but i cant stop it from vibrating. its really noisy.
Click to expand...
Click to collapse
There was a crack available for snapdragon phones which disables mi account to flash the rom.
But the mediatek phones are hopeless. You have to take it to the service centre.

Aadharsh.1 said:
There was a crack available for snapdragon phones which disables mi account to flash the rom.
But the mediatek phones are hopeless. You have to take it to the service centre.
Click to expand...
Click to collapse
Something interesting, after it vibrate til battery dead, i connect it to PC and try to flash it via SP, and it boot up, also can go to fastboot.
So i flash PB back and flash Los, now its working perfectly.
Thanks for your reply

[ROM][10.0.0][Hima] crDroid 6.16 [Unofficial]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 21.0 or newer for root (after first boot) - (Download from here)
First time installation:
You need Unlocked bootloader for install
step 1 Download crDroid from the link, if you want root then download Magisk also and copy it all to your Phone internel or external your choice.
step 2 Go to recovery when you didnt installed it already download it from the listed link, go in fastboot with all 3 keys pressed hold then select with volume keys Download mode and hit power button,
When youre on Windows download adb minimal and fastboot here in https://forum.xda-developers.com/showthread.php?t=2317790 install it , open the shortcut on your desktop if one was created when not just serch in Windows for minimal and you will find it.
step 3 Type in the opened command prompt in minimal adb and fastboot: adb devices to check if device was recognized, when not download here the drivers to make sure it works fine https://downloadmirror.co/1LnA/HTC_Driver_v4.17.0.001.zip?pt=SCTaNyN4GCn3NIchsd7q3hM7hBYxuFbGvjQe9voyZY4= run it let it install then type again fastboot devices make sure you see some numbers like FA53WYJ13710 then it works fine and can start flashing.
step 4 Go to your download folder and search for twrp-3.4.0-0-hima.img rename it to twrp.img to make it easier for you to flash. copy the renamed twrp.img to C:/Program Files (x86)/minmal adb and fastboot/
step 5 Type in your Minimal adb Fastboot prompt: flash recovery twrp.img after OK type fastboot reboot bootloader and select with volume keys recovery and hit power button, congrats youre in TWRP recovery
step 6 Now you can make A backup of all your stuff when you have enough Disk space on your Internal or External storage when not make space on your SDcard or Internal storage and copy all your stoff on your Computer to make Space for a backup of your Data =apps and settings System = current Android. when you have Done that part go to install and select the Download Rom install it and if you want root then also The Magisk.zip props go out to https://forum.xda-developers.com/member.php?u=4470081 thanks to him for for his Makgisk root solution :good: and after all installed hit Reboot
Update installation:
You can dirty flash it if youre on android 10 and youre lucky it will start without apps crashing.
If you dont want to get Dirty then you youre fomat Data and System in TWRP and flash the Rom also you can make a Backup current Rom if you want.
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/AICP/kernel_htc_msm8994
Download:
ROM https://www.mediafire.com/folder/gvfujacrh306y/crDroid_10
Version 6.12 is Claymore style version, 6.16 is my style, maybe more performance on cost of battery.
Known issues:
None, tell me
Visit official website @ crDroid.net
crDroid Community Telegram
Donate to help our team pay server costs
Here some pics
Edit: The rom is newer then the pics, this are just Sampels i created a while ago
https://ibb.co/BjCbGCV
https://ibb.co/HXNCPTh
Thanks to:
- Claymore 1297 and his Team for the work on the M9, without him it wouldn't be possible!
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
ROM OS Version Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: 4.x
Based On: Lineage
Version Information
Status: Stable
Created 2020-11-23
Last Updated 2021-05-13

The download link of suggested twrp is here.

tombbb said:
The download link of suggested twrp is here.
Click to expand...
Click to collapse
Its already included in flashing instructions

I clean installed your ROM on my M9, and it's nice!! Thank you!

May I ask will there be build 6.1.3 for m9?

tombbb said:
May I ask will there be build 6.1.3 for m9?
Click to expand...
Click to collapse
I think yes , i will build lastest release and then iam aiminng for Crdroid 7. But for now i have to wait to get my Notebook fixed...

Hi, I try the rom and it's great, all works but signal operator. My broadband comapny is Fastweb (Italy) and the sim is ok, not broken (tested on another HTC One M9). What can it be? Any suggestion?
Thanks in advance
Update (15 Feb 2021)
weird is when I run the phone it ask me for the SIM passoword, so it seems that it seeing by the system but, if I try make a call it say: cellular broadband network not available

Marko Indaco said:
Hi, I try the rom and it's great, all works but signal operator. My broadband comapny is Fastweb (Italy) and the sim is ok, not broken (tested on another HTC One M9). What can it be? Any suggestion?
Thanks in advance
Update (15 Feb 2021)
weird is when I run the phone it ask me for the SIM passoword, so it seems that it seeing by the system but, if I try make a call it say: cellular broadband network not available
Click to expand...
Click to collapse
Ah bro when you want sigal go to APN write something save it , and then it work , its a bug in generell

platinumthis said:
Ah bro when you want sigal go to APN write something save it , and then it work , its a bug in generell
Click to expand...
Click to collapse
I already try it without success. I'll try again in a few hours but I'm feeling that dont works. I wonder what could be. I mean, I use ViperOneM9 on another HTC OneM9 and it's always works fine. No need to set APN or whatever. Even after flash/dirty flash, changing roms and then reisntall ViperOne... the signal always works perfect in this case.
Thank you for reply anyway

Changelog
* Updated to lastest Crdroid and Lineage base
* Tweaked some Performance
* ViperFX Works Out of the Box

Such a good news ! Thank you !
Is dirty flash from 6.12 to 6.16 suggested ?

It has to work when you flash

tombbb said:
Such a good news ! Thank you !
Is dirty flash from 6.12 to 6.16 suggested ?
Click to expand...
Click to collapse
Indeed

platinumthis said:
Indeed
Click to expand...
Click to collapse
I upgraded to 6.16, it is great and stable.

platinumthis said:
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 21.0 or newer for root (after first boot) - (Download from here)
First time installation:
You need Unlocked bootloader for install
step 1 Download crDroid from the link, if you want root then download Magisk also and copy it all to your Phone internel or external your choice.
step 2 Go to recovery when you didnt installed it already download it from the listed link, go in fastboot with all 3 keys pressed hold then select with volume keys Download mode and hit power button,
When youre on Windows download adb minimal and fastboot here in https://forum.xda-developers.com/showthread.php?t=2317790 install it , open the shortcut on your desktop if one was created when not just serch in Windows for minimal and you will find it.
step 3 Type in the opened command prompt in minimal adb and fastboot: adb devices to check if device was recognized, when not download here the drivers to make sure it works fine https://downloadmirror.co/1LnA/HTC_Driver_v4.17.0.001.zip?pt=SCTaNyN4GCn3NIchsd7q3hM7hBYxuFbGvjQe9voyZY4= run it let it install then type again fastboot devices make sure you see some numbers like FA53WYJ13710 then it works fine and can start flashing.
step 4 Go to your download folder and search for twrp-3.4.0-0-hima.img rename it to twrp.img to make it easier for you to flash. copy the renamed twrp.img to C:/Program Files (x86)/minmal adb and fastboot/
step 5 Type in your Minimal adb Fastboot prompt: flash recovery twrp.img after OK type fastboot reboot bootloader and select with volume keys recovery and hit power button, congrats youre in TWRP recovery
step 6 Now you can make A backup of all your stuff when you have enough Disk space on your Internal or External storage when not make space on your SDcard or Internal storage and copy all your stoff on your Computer to make Space for a backup of your Data =apps and settings System = current Android. when you have Done that part go to install and select the Download Rom install it and if you want root then also The Magisk.zip props go out to https://forum.xda-developers.com/member.php?u=4470081 thanks to him for for his Makgisk root solution :good: and after all installed hit Reboot
Update installation:
You can dirty flash it if youre on android 10 and youre lucky it will start without apps crashing.
If you dont want to get Dirty then you youre fomat Data and System in TWRP and flash the Rom also you can make a Backup current Rom if you want.
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/AICP/kernel_htc_msm8994
Download:
ROM https://www.mediafire.com/file/gcpqv6fou03pag9/crDroidAndroid-10.0-20210512-hima-v6.18.zip/file
Known issues:
None, tell me
Visit official website @ crDroid.net
crDroid Community Telegram
Donate to help our team pay server costs
Here some pics
Edit: The rom is newer then the pics, this are just Sampels i created a while ago
https://ibb.co/BjCbGCV
https://ibb.co/HXNCPTh
Thanks to:
- Claymore 1297 and his Team for the work on the M9, without him it wouldn't be possible!
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
ROM OS Version Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: 4.x
Based On: Lineage
Version Information
Status: Stable
Created 2020-11-23
Last Updated 2021-05-13
Click to expand...
Click to collapse
Hello, i want revert back version 6.16. It is possible?
6.18 is doing random restarts.

Sure its possible, i wil invetigate and will make a new one when i have time, lets say 10 Days

platinumthis said:
Sure its possible, i wil invetigate and will make a new one when i have time, lets say 10 Days
Click to expand...
Click to collapse
Or use only 6.16 and get there security updates. This version was really crazy in battery life. I remember also some little graphics glitches, mostly with recents, but in overall BEST custom rom for this device.

tombbb said:
I upgraded to 6.16, it is great and stable.
Click to expand...
Click to collapse
Hi Do you have v6.16 of this ROM? If yes, could you please share with us? Thanks

Arsenik013 said:
Hi Do you have v6.16 of this ROM? If yes, could you please share with us? Thanks
Click to expand...
Click to collapse
I once checked last time someone asked, but I don't have it anymore...
I don't see any bad of 7.12, maybe you try sometime?

[DISCONTINUED][R][20210314][ROM][UNOFFICIAL] LineageOS 18.1 for Xperia 5 II

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
NOTICE:
This is the last update before i sold this phone.
[Please make sure you updated to 58.1.X (Which is Android11)]
+ Camera key and Assist Key Fix
+ Update to R based
+ Fix the issue about 5Ghz hotspot
+ March Security Update
About LineageOS:
LineageOS is a free, community built, aftermarket firmware distribution of Android 11.x (R),
which is designed to increase performance and reliability over stock Android for your device.
All the source code for LineageOS is available in the LineageOS GitHub repo.
And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Official LineageOS website : http://lineageos.org
About LineageOS Legal : http://lineageos.org/legal/
Important Information:
1. This ROM has nothing related to ODM images! So you don't need to ask/install anything like that, just follow the instructions.
2. This ROM will never work with any versions of Google Camera (GCam)!
3. You need to flash Stock Android 11 before flashing this ROM.
4. For VoLTE, you need to boot into stock firmware and enable it before flashing this ROM!
5. If you came from SODP ROMs, you need to go back to official Android 11 firmware, and boot into launcher.
6. Please make sure you are using Android 11 Stock ROM [Version > 58.1.X] before flash this.
7. Still in developing. May have some unexpected bugs.
Downloads Links
LineageOS 18.1:
Unofficial-build: Link (MEGA)
Looking For CinemaPro And PhotoPro:
Click Here
Google Applications (optional):
NikGApps: https://nikgapps.com
Information: Flash the GApps before the first boot. If not, a clean flash is recommended.
Flashing and updating
How to flash
Make sure you upgraded to Official Android 11 from Sony
Unlock bootloader is necessary.
Download latest platform-tools from google
1. Install fastbootd drivers, guidance
2. Put your device into fastboot by volume up key.
3. Enter fastbootd:
Code:
fastboot reboot fastboot
4. Flash LineageOS:
Code:
fastboot set_active a
fastboot flash boot boot.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system vbmeta_system.img
fastboot erase metadata
fastboot flash system system.img
fastboot flash product product.img
5. If you are first time to flash LineageOS, Wipe the old userdata:
Code:
fastboot erase userdata
GApps:
Download my OrangeFox Recovery then flash it
Root access:
Flash Magisk in recovery.
SD CARD Notice:
Format you sdcard into 'FAT32' if your sdcard can NOT be use in this system
Issues and reports:
Report issues only if you are using the ROM kernel
If an additional mod is installed, make sure it's unrelated, and mention it
Make sure the issue wasn't discussed earlier in the threads
Share a log of the error with Logcat for example
Bugs:
LDAC (Not sure)
FP Not working in Third Apps
Also thanks to:
BBN Shion Sjll
nezorflame (This build won`t come out so fast without his server)
The LineageOS Team
The CyanogenMod Team
Source:
Kernel Source
Device vendor
Device Tree
Feel free to donate me:
Paypal
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Oh wow it was quick lol thanks a lot for this build once again. Fortunately, there are developers like you.
I have a few questions though :
1. Which version of Magisk will work for root on this build?
2. Can I install full or stock NikGapps without any issues?
3. Does the issue with the sd card mentioned in the post about LOS 17.1 been fixed?
Have a beautiful day.

Stuck on boot on Lineage logo. Have already upgraded to A11 before this, so it might be connected.
Will try to grab logcat.

flyl0 said:
Oh wow it was quick lol thanks a lot for this build once again. Fortunately, there are developers like you.
I have a few questions though :
1. Which version of Magisk will work for root on this build?
2. Can I install full or stock NikGapps without any issues?
3. Does the issue with the sd card mentioned in the post about LOS 17.1 been fixed?
Have a beautiful day.
Click to expand...
Click to collapse
Both Nik's and OpenGApps latest packages should be fine, but you may have issues regarding the size - I wasn't able to install our stock package due to insufficient space.

Nezorflame said:
Stuck on boot on Lineage logo. Have already upgraded to A11 before this, so it might be connected.
Will try to grab logcat.
Click to expand...
Click to collapse
Nezorflame said:
Both Nik's and OpenGApps latest packages should be fine, but you may have issues regarding the size - I wasn't able to install our stock package due to insufficient space.
Click to expand...
Click to collapse
Damn so we can't install full or stock Gapps/NikGapps on LOS 18.1 ?
Anyway i can stay on A10 and flash this rom right ?

As OP said, yeah.

ken442266 said:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android 11.x (R),
which is designed to increase performance and reliability over stock Android for your device.
All the source code for LineageOS is available in the LineageOS GitHub repo.
And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Official LineageOS website : http://lineageos.org
About LineageOS Legal : http://lineageos.org/legal/
Important Information
1. This ROM has nothing related to ODM images! So you don't need to ask/install anything like that, just follow the instructions.
2. This ROM will never work with any versions of Google Camera (GCam)!
3. You need to flash Stock Android 10 before flashing this ROM.
4. For VoLTE, you need to boot into stock firmware and enable it before flashing this ROM!
5. If you came from SODP ROMs, you need to go back to official Android 10 firmware, and boot into launcher.
6. You don`t need to upgrade to R vendor (58.1.X).Just stay at Q vendor 58.0.X will be fine.
7. Still in developing. May have some unexpected bugs.
Downloads Links
LineageOS 18.1:
Unofficial-build: Link (AFH)
Google Applications (optional):
NikGApps: https://nikgapps.com
Information: Flash the GApps before the first boot. If not, a clean flash is recommended.
Flashing and updating
How to flash
Make sure you upgraded to Official Android 10.0 from Sony
Unlock bootloader is necessary.
Download latest platform-tools from google
1. Install fastbootd drivers, guidance
2. Put your device into fastboot by volume up key.
3. Enter fastbootd:
Code:
fastboot reboot fastboot
4. Flash LineageOS:
Code:
fastboot set_active a
fastboot flash boot boot.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system vbmeta_system.img
fastboot erase metadata
fastboot flash system system.img
fastboot flash product product.img
5. If you are first time to flash LineageOS, Wipe the old userdata:
Code:
fastboot erase userdata
GApps:
Download Lineage Recovery
Flash and boot into Recovery then choose Apply update - Apply from ADB, then sideload the gapps package on your PC with adb tool:
Code:
adb sideload <PATH OF GAPPS>
Root access:
Flash Magisk in recovery.
Issues and reports:
Report issues only if you are using the ROM kernel
If an additional mod is installed, make sure it's unrelated, and mention it
Make sure the issue wasn't discussed earlier in the threads
Share a log of the error with Logcat for example
Bugs:
LDAC (Not sure)
Also thanks to:
BBN Shion Sjll
The LineageOS Team
The CyanogenMod Team
Source:
Kernel Source
Device vendor
Device Tree
Screenshots:
View attachment 5194147View attachment 5194149View attachment 5194151
Click to expand...
Click to collapse
Awesome!, did you manage to get the SD card working?

Nezorflame said:
Stuck on boot on Lineage logo. Have already upgraded to A11 before this, so it might be connected.
Will try to grab logcat.
Click to expand...
Click to collapse
The OP says you should use the stock android 10 firmware as a basis, so I'd imagine thats your issue.

Jayram2000 said:
The OP says you should use the stock android 10 firmware as a basis, so I'd imagine thats your issue.
Click to expand...
Click to collapse
Not really - the first post states that "You don`t need to upgrade to R vendor (58.1.X)", that doesn't imply that with R vendor the phone won't boot. If that's the case, then the initial quote is kinda misleading.
In any case, I'll just try Q vendor as well and see how it goes.

So I've been testing different vendor setups and yes, using R vendor will render the ROM not to boot - it doesn't get past the initial boot animation loop.
So I guess it'd be better to correct the first post stating that users MUST use Q vendor in order to be able to boot.

Apparently the sd card bug is still there too..

flyl0 said:
Apparently the sd card bug is still there too..
Click to expand...
Click to collapse
Yup, it doesn't get detected as properly formatted, OS wants me to reformat it.

Nezorflame said:
So I've been testing different vendor setups and yes, using R vendor will render the ROM not to boot - it doesn't get past the initial boot animation loop.
So I guess it'd be better to correct the first post stating that users MUST use Q vendor in order to be able to boot.
Click to expand...
Click to collapse
Thanks for correct. Yeah, You have to use Q vendor.

It's a shame because I will not use this build if my sd card is not recognized

So about sd card issue. I`m not sure what cause this issue. And when i trying to solve this.
It just works fine on my sd card. So i do not know how to solve it as i can`t get some details on it.
So if anybody can provide logcat for format && access sd card that can be great.
By the way. PixelExperience Eleven is on the way.

ken442266 said:
So about sd card issue. I`m not sure what cause this issue. And when i trying to solve this.
It just works fine on my sd card. So i do not know how to solve it as i can`t get some details on it.
So if anybody can provide logcat for format && access sd card that can be great.
By the way. PixelExperience Eleven is on the way.
View attachment 5194959View attachment 5194961
Click to expand...
Click to collapse
I have a 128gb SDXC card from Samsung, I can try again. How can I capture the logcat for the SD?

TIP 1 : If you have an sd card and want to use it on this build you have to format the sd card to fat32, then it will work just fine.
TIP 2 : If you want Gapps on LOS, make sure to choose the core gapps or basic gapps only.

my apologies if this has been answered somewhere. What prevents GCAM from running on xperia devices with either stock or custom roms?

teostar said:
my apologies if this has been answered somewhere. What prevents GCAM from running on xperia devices with either stock or custom roms?
Click to expand...
Click to collapse
The answer is : "SONY"

Works well so far with the SD card formatted to FAT32. Now I have another device for my OpenGApps build testing
Let's hope exFAT support comes soon <3 great work!

[ROM][A13] RiceDroid 10.1 | Obbattu UNOFFICIAL [AOSP] Pixel4/4Xl - [Flame|Coral]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ricedroid for Pixel4/4XL [Flame/Coral]
What is riceDroid?
* RiceDroid is an opensource android operating system that aims to bring the necessary system modifications while being neat, stable and fast.
What is RiseUI?
* RiseUI is the name for our firmware skin/user interface.
Terminology
* The RICE in the project refers to rice(food) itself, but in a sense it is indeed the term RICING in linux.
Based on Android 13 | Obbattu
What's working?
Almost everything
What's working? aka Firmware issues
FIX "Device Health Services Adapter keeps stopping"
Please root and delete the old apk version on your device, then change and download the latest apk to work properly
DeviceHealthService_1.25.0.apk
Tell Me
DOWNLOAD LINKS : RiceDroid
First Time Install / Clean Flash from Another ROM
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6.FORMAT DATA . (Requires full backup of internal storage) ignore any error
7. Reboot to System and #KeepRiceDroid
Update / Dirty Flash
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6. Reboot to System and #KeepRiceDroid
Android OS version: 13.0.0_r20
Security patch level: January 2023
Build author/Device Maintainer: Bolaramy
Device source code: https://github.com/RiceDroid-devices
Firmware source code: github.com
Firmware created by: The riceDroid Team
Thanks 🅣🅞🅝🅨 donate to maintain the server to build this ROM
More: Our Telegram Channel

Dev_Member said:
riceDroid for Pixel4/4XL [Flame/Coral]
What is riceDroid?
* RiceDroid is an opensource android operating system that aims to bring the necessary system modifications while being neat, stable and fast.
What is RiseUI?
* RiseUI is the name for our firmware skin/user interface.
Terminology
* The RICE in the project refers to rice(food) itself, but in a sense it is indeed the term RICING in linux.
Based on Android 13 | Obbattu
What's working?
Almost everything
What's working? aka Firmware issues
Tell Me
Download links: GoogleDriver
First Time Install / Clean Flash from Another ROM
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6.FORMAT DATA . (Requires full backup of internal storage) ignore any error
7. Reboot to System and #KeepRiceDroid
Update / Dirty Flash
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6. Reboot to System and #KeepRiceDroid
Android OS version: 13
Security patch level: 28/01/2023
Build author/Device Maintainer: BolAalex
Device source code: BolAalex
Firmware source code:https://github.com/ricedroidOSS
Firmware created by: The riceDroid Team
Click to expand...
Click to collapse
What are the benefits of running this compared to say... Pixel Experience or CrDroid?

LuckyTheCoder said:
What are the benefits of running this compared to say... Pixel Experience or CrDroid?
Click to expand...
Click to collapse
Let's try according to each person's feelings

I will try my best thanks for type this theard in xda

BolAalex said:
I will try my best thanks for type this theard in xda
Click to expand...
Click to collapse
Nice bro you is my best

Dev_Member said:
riceDroid for Pixel4/4XL [Flame/Coral]
What is riceDroid?
* RiceDroid is an opensource android operating system that aims to bring the necessary system modifications while being neat, stable and fast.
What is RiseUI?
* RiseUI is the name for our firmware skin/user interface.
Terminology
* The RICE in the project refers to rice(food) itself, but in a sense it is indeed the term RICING in linux.
Based on Android 13 | Obbattu
What's working?
Almost everything
What's working? aka Firmware issues
Tell Me
Download links: GoogleDriver
First Time Install / Clean Flash from Another ROM
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6.FORMAT DATA . (Requires full backup of internal storage) ignore any error
7. Reboot to System and #KeepRiceDroid
Update / Dirty Flash
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6. Reboot to System and #KeepRiceDroid
Android OS version: 13
Security patch level: 28/01/2023
Build author/Device Maintainer: BolAalex
Device source code: BolAalex
Firmware source code: https://github.com/ricedroidOSS
Firmware created by: The riceDroid Team
BIG THANK YOU
Bolaalex build this rom
TonyDubai1999 donate to maintain the server
Click to expand...
Click to collapse
File rom will soon uploading ggdriver

Dev_Member said:
riceDroid for Pixel4/4XL [Flame/Coral]
What is riceDroid?
* RiceDroid is an opensource android operating system that aims to bring the necessary system modifications while being neat, stable and fast.
What is RiseUI?
* RiseUI is the name for our firmware skin/user interface.
Terminology
* The RICE in the project refers to rice(food) itself, but in a sense it is indeed the term RICING in linux.
Based on Android 13 | Obbattu
What's working?
Almost everything
What's working? aka Firmware issues
Tell Me
Download links: GoogleDriver
First Time Install / Clean Flash from Another ROM
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6.FORMAT DATA . (Requires full backup of internal storage) ignore any error
7. Reboot to System and #KeepRiceDroid
Update / Dirty Flash
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6. Reboot to System and #KeepRiceDroid
Android OS version: 13
Security patch level: 28/01/2023
Build author/Device Maintainer: BolAalex
Device source code: BolAalex
Firmware source code: https://github.com/ricedroidOSS
Firmware created by: The riceDroid Team
BIG THANK YOU
Bolaalex build this rom
TonyDubai1999 donate to maintain the server
More: Our Telegram Channel
Click to expand...
Click to collapse
Initial impressions:
Slick and more robust than CrDroid
Adds some features that I'm digging
Loving the look and feel of the UI
Issues:
Getting a "Device Health Services Adapter keeps stopping" pop-up often, though this can be solved by rooting, removing the application, and installing the latest version from Apkmirror.
Incorrect padding on the status bar; essentially clips the time off the screen (and the carrier on the lock screen) ever so slightly, can easily be solved.
Fails safety-net

Dev_Member said:
riceDroid for Pixel4/4XL [Flame/Coral]
What is riceDroid?
* RiceDroid is an opensource android operating system that aims to bring the necessary system modifications while being neat, stable and fast.
What is RiseUI?
* RiseUI is the name for our firmware skin/user interface.
Terminology
* The RICE in the project refers to rice(food) itself, but in a sense it is indeed the term RICING in linux.
Based on Android 13 | Obbattu
What's working?
Almost everything
What's working? aka Firmware issues
Tell Me
Download links: GoogleDriver
First Time Install / Clean Flash from Another ROM
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6.FORMAT DATA . (Requires full backup of internal storage) ignore any error
7. Reboot to System and #KeepRiceDroid
Update / Dirty Flash
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6. Reboot to System and #KeepRiceDroid
Android OS version: 13
Security patch level: 28/01/2023
Build author/Device Maintainer: BolAalex
Device source code: BolAalex
Firmware source code: https://github.com/ricedroidOSS
Firmware created by: The riceDroid Team
BIG THANK YOU
Bolaalex build this rom
TonyDubai1999 donate to maintain the server
More: Our Telegram Channel
Click to expand...
Click to collapse
Check and down file

THANK U DEV, Hope we go deeper on This....Uniqueness on our P4s Active edge, back double tap Features are missing and RICE The BOOT animation too

LuckyTheCoder said:
What are the benefits of running this compared to say... Pixel Experience or CrDroid?
Click to expand...
Click to collapse
new unique ui...A lot of customization

musp7 said:
THANK U DEV, Hope we go deeper on This....Uniqueness on our P4s Active edge, back double tap Features are missing and RICE The BOOT animation too
Click to expand...
Click to collapse
Source not not stable yet

LuckyTheCoder said:
Initial impressions:
Slick and more robust than CrDroid
Adds some features that I'm digging
Loving the look and feel of the UI
Issues:
Getting a "Device Health Services Adapter keeps stopping" pop-up often, though this can be solved by rooting, removing the application, and installing the latest version from Apkmirror.
Incorrect padding on the status bar; essentially clips the time off the screen (and the carrier on the lock screen) ever so slightly, can easily be solved.
Fails safety-net
Click to expand...
Click to collapse
FIX "Device Health Services Adapter keeps stopping"
Please root and delete the old apk version on your device, then change and download the latest apk to work properly
DeviceHealthService_1.25.0.apk
drive.google.com

Wifi calling toggle fails.

toddmax said:
Wifi calling toggle fails.
Click to expand...
Click to collapse
i will update and fixx soon thanks feeback

This ROM is very smooth

Is this status bar based on los common problem？

such a great work !! great customization and smooth !! @Dev_Member Since there are no updates for 3months i guess this PRoject is Dead :S

dukat0s said:
such a great work !! great customization and smooth !! @Dev_Member Since there are no updates for 3months i guess this PRoject is Dead :S
Click to expand...
Click to collapse
Am Developer of this rom @Dev_Member is my friend who's posted it for me and yes project dead cause no server , unfortunately :⁠-⁠\

Dirty flashed form EvoX and everything just works fine!

Please add app Lock skip manual confirmation option,

Database Info

welcome