[ROM][10.0.0][Hima] crDroid 6.16 [Unofficial] - One (M9) Android Development

[ROM][10.0.0][Hima] crDroid 6.16 [Unofficial] - One (M9) Android Development

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 21.0 or newer for root (after first boot) - (Download from here)
First time installation:
You need Unlocked bootloader for install
step 1 Download crDroid from the link, if you want root then download Magisk also and copy it all to your Phone internel or external your choice.
step 2 Go to recovery when you didnt installed it already download it from the listed link, go in fastboot with all 3 keys pressed hold then select with volume keys Download mode and hit power button,
When youre on Windows download adb minimal and fastboot here in https://forum.xda-developers.com/showthread.php?t=2317790 install it , open the shortcut on your desktop if one was created when not just serch in Windows for minimal and you will find it.
step 3 Type in the opened command prompt in minimal adb and fastboot: adb devices to check if device was recognized, when not download here the drivers to make sure it works fine https://downloadmirror.co/1LnA/HTC_Driver_v4.17.0.001.zip?pt=SCTaNyN4GCn3NIchsd7q3hM7hBYxuFbGvjQe9voyZY4= run it let it install then type again fastboot devices make sure you see some numbers like FA53WYJ13710 then it works fine and can start flashing.
step 4 Go to your download folder and search for twrp-3.4.0-0-hima.img rename it to twrp.img to make it easier for you to flash. copy the renamed twrp.img to C:/Program Files (x86)/minmal adb and fastboot/
step 5 Type in your Minimal adb Fastboot prompt: flash recovery twrp.img after OK type fastboot reboot bootloader and select with volume keys recovery and hit power button, congrats youre in TWRP recovery
step 6 Now you can make A backup of all your stuff when you have enough Disk space on your Internal or External storage when not make space on your SDcard or Internal storage and copy all your stoff on your Computer to make Space for a backup of your Data =apps and settings System = current Android. when you have Done that part go to install and select the Download Rom install it and if you want root then also The Magisk.zip props go out to https://forum.xda-developers.com/member.php?u=4470081 thanks to him for for his Makgisk root solution :good: and after all installed hit Reboot
Update installation:
You can dirty flash it if youre on android 10 and youre lucky it will start without apps crashing.
If you dont want to get Dirty then you youre fomat Data and System in TWRP and flash the Rom also you can make a Backup current Rom if you want.
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/AICP/kernel_htc_msm8994
Download:
ROM https://www.mediafire.com/folder/gvfujacrh306y/crDroid_10
Version 6.12 is Claymore style version, 6.16 is my style, maybe more performance on cost of battery.
Known issues:
None, tell me
Visit official website @ crDroid.net
crDroid Community Telegram
Donate to help our team pay server costs
Here some pics
Edit: The rom is newer then the pics, this are just Sampels i created a while ago
https://ibb.co/BjCbGCV
https://ibb.co/HXNCPTh
Thanks to:
- Claymore 1297 and his Team for the work on the M9, without him it wouldn't be possible!
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
ROM OS Version Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: 4.x
Based On: Lineage
Version Information
Status: Stable
Created 2020-11-23
Last Updated 2021-05-13

The download link of suggested twrp is here.

tombbb said:
The download link of suggested twrp is here.
Click to expand...
Click to collapse
Its already included in flashing instructions

I clean installed your ROM on my M9, and it's nice!! Thank you!

May I ask will there be build 6.1.3 for m9?

tombbb said:
May I ask will there be build 6.1.3 for m9?
Click to expand...
Click to collapse
I think yes , i will build lastest release and then iam aiminng for Crdroid 7. But for now i have to wait to get my Notebook fixed...

Hi, I try the rom and it's great, all works but signal operator. My broadband comapny is Fastweb (Italy) and the sim is ok, not broken (tested on another HTC One M9). What can it be? Any suggestion?
Thanks in advance
Update (15 Feb 2021)
weird is when I run the phone it ask me for the SIM passoword, so it seems that it seeing by the system but, if I try make a call it say: cellular broadband network not available

Marko Indaco said:
Hi, I try the rom and it's great, all works but signal operator. My broadband comapny is Fastweb (Italy) and the sim is ok, not broken (tested on another HTC One M9). What can it be? Any suggestion?
Thanks in advance
Update (15 Feb 2021)
weird is when I run the phone it ask me for the SIM passoword, so it seems that it seeing by the system but, if I try make a call it say: cellular broadband network not available
Click to expand...
Click to collapse
Ah bro when you want sigal go to APN write something save it , and then it work , its a bug in generell

platinumthis said:
Ah bro when you want sigal go to APN write something save it , and then it work , its a bug in generell
Click to expand...
Click to collapse
I already try it without success. I'll try again in a few hours but I'm feeling that dont works. I wonder what could be. I mean, I use ViperOneM9 on another HTC OneM9 and it's always works fine. No need to set APN or whatever. Even after flash/dirty flash, changing roms and then reisntall ViperOne... the signal always works perfect in this case.
Thank you for reply anyway

Changelog
* Updated to lastest Crdroid and Lineage base
* Tweaked some Performance
* ViperFX Works Out of the Box

Such a good news ! Thank you !
Is dirty flash from 6.12 to 6.16 suggested ?

It has to work when you flash

tombbb said:
Such a good news ! Thank you !
Is dirty flash from 6.12 to 6.16 suggested ?
Click to expand...
Click to collapse
Indeed

platinumthis said:
Indeed
Click to expand...
Click to collapse
I upgraded to 6.16, it is great and stable.

platinumthis said:
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 21.0 or newer for root (after first boot) - (Download from here)
First time installation:
You need Unlocked bootloader for install
step 1 Download crDroid from the link, if you want root then download Magisk also and copy it all to your Phone internel or external your choice.
step 2 Go to recovery when you didnt installed it already download it from the listed link, go in fastboot with all 3 keys pressed hold then select with volume keys Download mode and hit power button,
When youre on Windows download adb minimal and fastboot here in https://forum.xda-developers.com/showthread.php?t=2317790 install it , open the shortcut on your desktop if one was created when not just serch in Windows for minimal and you will find it.
step 3 Type in the opened command prompt in minimal adb and fastboot: adb devices to check if device was recognized, when not download here the drivers to make sure it works fine https://downloadmirror.co/1LnA/HTC_Driver_v4.17.0.001.zip?pt=SCTaNyN4GCn3NIchsd7q3hM7hBYxuFbGvjQe9voyZY4= run it let it install then type again fastboot devices make sure you see some numbers like FA53WYJ13710 then it works fine and can start flashing.
step 4 Go to your download folder and search for twrp-3.4.0-0-hima.img rename it to twrp.img to make it easier for you to flash. copy the renamed twrp.img to C:/Program Files (x86)/minmal adb and fastboot/
step 5 Type in your Minimal adb Fastboot prompt: flash recovery twrp.img after OK type fastboot reboot bootloader and select with volume keys recovery and hit power button, congrats youre in TWRP recovery
step 6 Now you can make A backup of all your stuff when you have enough Disk space on your Internal or External storage when not make space on your SDcard or Internal storage and copy all your stoff on your Computer to make Space for a backup of your Data =apps and settings System = current Android. when you have Done that part go to install and select the Download Rom install it and if you want root then also The Magisk.zip props go out to https://forum.xda-developers.com/member.php?u=4470081 thanks to him for for his Makgisk root solution :good: and after all installed hit Reboot
Update installation:
You can dirty flash it if youre on android 10 and youre lucky it will start without apps crashing.
If you dont want to get Dirty then you youre fomat Data and System in TWRP and flash the Rom also you can make a Backup current Rom if you want.
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/AICP/kernel_htc_msm8994
Download:
ROM https://www.mediafire.com/file/gcpqv6fou03pag9/crDroidAndroid-10.0-20210512-hima-v6.18.zip/file
Known issues:
None, tell me
Visit official website @ crDroid.net
crDroid Community Telegram
Donate to help our team pay server costs
Here some pics
Edit: The rom is newer then the pics, this are just Sampels i created a while ago
https://ibb.co/BjCbGCV
https://ibb.co/HXNCPTh
Thanks to:
- Claymore 1297 and his Team for the work on the M9, without him it wouldn't be possible!
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
ROM OS Version Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: 4.x
Based On: Lineage
Version Information
Status: Stable
Created 2020-11-23
Last Updated 2021-05-13
Click to expand...
Click to collapse
Hello, i want revert back version 6.16. It is possible?
6.18 is doing random restarts.

Sure its possible, i wil invetigate and will make a new one when i have time, lets say 10 Days

platinumthis said:
Sure its possible, i wil invetigate and will make a new one when i have time, lets say 10 Days
Click to expand...
Click to collapse
Or use only 6.16 and get there security updates. This version was really crazy in battery life. I remember also some little graphics glitches, mostly with recents, but in overall BEST custom rom for this device.

tombbb said:
I upgraded to 6.16, it is great and stable.
Click to expand...
Click to collapse
Hi Do you have v6.16 of this ROM? If yes, could you please share with us? Thanks

Arsenik013 said:
Hi Do you have v6.16 of this ROM? If yes, could you please share with us? Thanks
Click to expand...
Click to collapse
I once checked last time someone asked, but I don't have it anymore...
I don't see any bad of 7.12, maybe you try sometime?

Related

[LINEAGE-OS][STABLE.V4.1][7.1.2][UNOFFICIAL]14/02/2020[all variant]OMSv7

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of android, which is designed to increase performance and reliability over stock android for your device.
All the source code for LineageOS is available in the LineageOS Github repo.
Important info:
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Linux 3.4
- Note: Warning! You are the only responsible of your actions, and especially of your use of your phone. Neither I, neither XDA, are responsible of your handling with your phone.
- Note: You must have unlock your bootloader on sony's page
- Note: You need to use the stock bootloader. If you switched to the Open Device Bootloader (D2203), please flash again the old bootloader. Here you have FTF file: (https://drive.google.com/file/d/0B07I-JdP5dQzSWs3SW1uYXVsWjg/view?usp=sharing). If you don’t remember the process, you can check it on Google.
Working
All
Almost working
Cameras are not fully working. You can take panorama pictures but no videos nor photos (with Snap app). In some other apps you can take them sometimes. In cameringo for example you can take everything. Fixed on V4!
Known issues
WiFi MAC address is a default address because TA is not being read yet. We are working to fix it. This only makes that some WiFi networks does not allow your phone to connect because another device with the same address is connected, but this is not usual so you shouldn't have problems with that. Fixed on V4!
Audio bugs:
Songs may pause randomly after some time and continue after some secs.
Some games might have a laggy audio problem (Pokémon Go for example).
Download
You have to download the latest version of boot.img, recovery.img and system.img or flashable zip from this link https://drive.google.com/drive/folders/0B07I-JdP5dQzM1FRbXY4bGt4VzQ?usp=sharing
For Google apps (Play Store, Google account...) go to http://opengapps.org/, choose Arm for Android 7.1 and select any variant you want. We recommend Pico variant as is the smalles one (you can choose stock if you want Pixel launcher).
Install
You need to install adb and fastboot. If you don’t know how to do that, click on the link down below.
https://forum.xda-developers.com/showthread.php?t=2588979
Then, in your file explorer, go to « This computer » and search for the file « adb ».
Next, put files in the folder « adb ». Hold shift and click (right click). Then click on « open terminal » or do « cd » (you need to find the location of your file « adb »).
Boot your phone in Bootloader/fastboot (this is the exact same thing but with different names depending on how you call it).
Before all, you have to start cleaning the device so do a wipe then:
In the terminal, type the command « fastboot devices »
You should see something like this for example :
Code:
CVH7N15B11004115 fastboot
If it isnt’t the case
go to Device Manager
Find your phone
Click on properties
Update the driver for your phone
Choose « Bootloader interface » and retry the command « fastboot device »
Now, you’ve done a big part of the work! You only have to type the following commands.
Commands
Code:
1. fastboot flash boot "name of boot".img
2. (Starting from V4 - 2020-01-23) fastboot flash FOTAKernel "name of recovery".img
[COLOR="SeaGreen"]3. Boot TWRP with Vol - and flash LineageOS zip[/COLOR]
[B][COLOR="Red"]IMPORTANT:[/COLOR] Only if Magisk was automatically installed after flashing LineageOS zip and after the first reboot the ROM is not booting:[/B] [COLOR="SeaGreen"]Flash again any boot.img with fastboot or TWRP (using "Install image" option)[/COLOR]
[COLOR="red"][STRIKE]fastboot –S 256M flash system "name of system".img[/STRIKE] (that was for v1 && v2 )[/COLOR]
You will boot into your new ROM.
IMPORTANT!
If your Xperia E3 model is D2202 or D2212 (3G-only single and dual SIM variants) you may need to flash an additional firmware zip in order to get SIM card working if it does not work after the first boot. Here you have the link:
https://drive.google.com/drive/folders/0B07I-JdP5dQzRG83U2d2aXBmUWM?usp=sharing
Note that there is a zip for each variant, but this is only to avoid confusion. Both are the same zip and you can flash any of them.
Extras
Now all you have to do is to flash the GAPPs in the recovery.
For Magisk go to https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
and download Magisk app and zip (ONLY FOR VERSIONS BEFORE V4: using the boot named Magisk) and its corresponding Magisk version.
Contributors
@rmnhg Ramón Hernández
@infus38 Thomas
@Konstantinosj77
@galaxyfreak
@adfad666
@vinay
@jerpelea
@Ｄｈｒｕｖ
@jpzex
@Nicklas Van Dam
@madcodez
Changelog
- note only last change will be post ( change log for v1 and v2 was remove )
New release 14/02/20 v4.1
Fixed a sensors bug introduced on V4. Now sensors should work as before.
New release 23/01/20 v4
Recovery is now independent from Boot partition! Now you should flash recovery image to FOTAKernel using fastboot or to "recovery" partition using TWRP. With this measure you can flash any Magisk version without waiting us to update boot.img.
Camera fully working now! Torch also works. The only thing you can't do is to enable Noise Reduction on Snap as it is not supported on Stock ROM
Bluetooth and WiFi addresses are now fine. They should be the same as the stock ones.
Compass may work better.
New release 06/01/18 v3
Tethering works now (in WiFi, BT and USB)
NFC works perfectly now
Now no user needs to flash additional firmware blobs This is not always working.
Camera working partially (I recommend you taking photos with panoramic mode and videos with other apps, like Instagram)
TWRP 3.2.1
Magisk v15.2 is now supported
Sony's framework is preinstalled, you are able to download Sony's Apps from Google Play
Safety net passed using Magisk+Magisk Hide
XDA:DevDB Information
LINEAGE-OS OMSv7, ROM for the Sony Xperia E3
Contributors
infus38, rmnhg
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: V4.1
Stable Release Date: 2020-02-14
Created 2018-03-23
Last Updated 2020-02-14

Screenshots, do you have? And steal in development?

eladiocesar said:
Screenshots, do you have? And steal in development?
Click to expand...
Click to collapse
Yes i have screenshots i can not now post them the rom work and is very stable you Can try

When I give the 2nd command, a list of commands shows up. What to do?
Edit: Resolved by @infus38 Thomas

First Of all Thanx Everyone Who Has Contributed in the making of this ROM i m glad that Dev Has not left the Users Of E3 in the dark.
So,I hv a Xperia E3 D2203 18.5.0.C.19 Currently i m on Cyanogen 11 ROM UNOFFICIAL.
I hv some questions regarding this ROM-
1-Does this ROM hv any Recovery Installed?
2-This ROM does not hv root access so if i want root cn i flash the SuperSU Zip 2.79?
3-Will u make a flashable Zip Package Of via Recovery for this ROM?
4-Do i need to perform a Wipe Data/Factory Reset in Recovery before flashing this ROM?
5-Are there any Special Features In this ROM?
6-Which Gapps Should i Flash with this ROM?
7-Does This ROM support Substrantum Theme Manager?
I think that's It.
Thanx In Advance.:fingers-crossed::fingers-crossed:

..

device dosn't boot only boot animation are show(D2202) please help.
edit-solved

priyesh9 said:
device dosn't boot only boot animation are show(D2202) please help .
Click to expand...
Click to collapse
We tested on each variant this rom without problem, you can quote me exactly what you did in private message pleas
I will take care of your problem do not worry
Edit now solved

UPDATE: now you have boot.img with latest TWRP included

Edit-Solved

Ali Haide 001 said:
First Of all Thanx Everyone Who Has Contributed in the making of this ROM i m glad that Dev Has not left the Users Of E3 in the dark.
So,I hv a Xperia E3 D2203 18.5.0.C.19 Currently i m on Cyanogen 11 ROM UNOFFICIAL.
I hv some questions regarding this ROM-
1-Does this ROM hv any Recovery Installed?
2-This ROM does not hv root access so if i want root cn i flash the SuperSU Zip 2.79?
3-Will u make a flashable Zip Package Of via Recovery for this ROM?
4-Do i need to perform a Wipe Data/Factory Reset in Recovery before flashing this ROM?
5-Are there any Special Features In this ROM?
6-Which Gapps Should i Flash with this ROM?
7-Does This ROM support Substrantum Theme Manager?
I think that's It.
Thanx In Advance.:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
1=For now no we have some problem,But later yes(edit The recovery has just been officially run from 18pm French time , You need to download the boot.img again to get the recovery if you have to download before )
2=Yes this ROM can be root now :flash this in recovery http://tiny.cc/latestmagisk and install apk http://tiny.cc/latestmanager
3=just with the bootloaderfor now you can flash the rom , not with the recovery (you will be able to read the topic all the same I gave myself trouble) ,for now 2 .img same aosp but follow the topic , soon the rom will be just a .zip we worked on
4=Yes you must all whyp but your sd card is not neccesaire of format
5=yes just lineage os
6=you can choos this for gapps http://opengapps.org/ choos arm 7.1 pico and flash in recovery (you can choos stock if you want pixel luncher)
7=This rom supports the substratum legacy theme soon the support of full omsv7
Thank you for your comment,If you have any other question you can ask them

infus38 said:
1=For now no we have some problem,But later yes(edit The recovery has just been officially run from 18pm French time , You need to download the boot.img again to get the recovery if you have to download before )
2=Yes this ROM can be root now :flash this in recovery http://tiny.cc/latestmagisk and install apk http://tiny.cc/latestmanager (If this does not work, wait for the next version of the boot.img it will have to include the root with magisk)
3=just with the bootloaderfor now you can flash the rom , not with the recovery (you will be able to read the topic all the same I gave myself trouble) ,for now 2 .img same aosp but follow the topic , soon the rom will be just a .zip we worked on
4=Yes you must all whyp but your sd card is not neccesaire of format
5=yes just lineage os
6=you can choos this for gapps https://www.androidfilehost.com/?w=files&flid=171931&sort_by=date&sort_dir=DESC
7=This rom supports the substratum legacy theme soon the support of full omsv7
Thank you for your comment,If you have any other question you can ask them
Click to expand...
Click to collapse
Two Question-
1-IS this Rom Support Substratum theme Manager at this Current Stage?
2-Can I flash Those SuperSU Addons Which Are Given On The Official Page Of LineageOS?
Thanks For Ur Help.:fingers-crossed::fingers-crossed:

Ali Haide 001 said:
Two Question-
1-IS this Rom Support Substratum theme Manager at this Current Stage?
2-Can I flash Those SuperSU Addons Which Are Given On The Official Page Of LineageOS?
Thanks For Ur Help.:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
1=This rom for now supports partially the substratum( just leagcy) but soon full omsv7 suport
2=for now the boot.img is in the process of modification because any method of root does not work, but in the next verssion the root will be included with magisk su (edit now at the time in french 19 pm new boot with root on cloud you can donwload :laugh: thanks @rmnhg )

rmnhg said:
UPDATE: now you have boot.img with latest TWRP included
Click to expand...
Click to collapse
Thank You Bro, Now We Hv TWRP Included :fingers-crossed::fingers-crossed::fingers-crossed:
Already Pressed The Thanks Button.
One Thing -
1-What Is The Version Of TWRP?
---------- Post added at 06:14 PM ---------- Previous post was at 06:08 PM ----------
infus38 said:
1=This rom for now supports partially the substratum( just leagcy) but soon full omsv7 suport
2=for now the boot.img is in the process of modification because any method of root does not work, but in the next verssion the root will be included with magisk su (edit now at the time in french 19 pm new boot with root on cloud you can donwload :laugh: thanks @rmnhg )
Click to expand...
Click to collapse
So, Now I don't Need To Flash The Files (For Root Access) Which You Hv Given Me Before
Thanx In Advance.
Downloading Now.

Ali Haide 001 said:
Thank You Bro, Now We Hv TWRP Included :fingers-crossed::fingers-crossed::fingers-crossed:
Already Pressed The Thanks Button.
One Thing -
1-What Is The Version Of TWRP?
---------- Post added at 06:14 PM ---------- Previous post was at 06:08 PM ----------
So, Now I don't Need To Flash The Files (For Root Access) Which You Hv Given Me Before
Thanx In Advance.
Downloading Now.
Click to expand...
Click to collapse
Yes just flahs lates boot_twrp_root.img ??

Ali Haide 001 said:
Thank You Bro, Now We Hv TWRP Included :fingers-crossed::fingers-crossed::fingers-crossed:
Already Pressed The Thanks Button.
One Thing -
1-What Is The Version Of TWRP?
Click to expand...
Click to collapse
You're welcome ?. TWRP is in it's latest version (3.1.1). Material design and multi language.

infus38 said:
We tested on each variant this rom without problem, you can quote me exactly what you did in private message pleas
I will take care of your problem do not worry
Click to expand...
Click to collapse
edit -solved

I was able to flash this ROM. I followed the instructions stated above but my d2203 was just stock at the LOS boot logo. I don't know what I did wrong. I came from stock KitKat rom before I flashed this. If that helps. HELP PLS! I really wanna try this ROM so badly
thanks @infus38 Thomas for helping me solve the problem

Screenshots
Note I'm using custom launcher and custom theme (flux substratum theme)
My review:- I'm using this ROM from 4 days and this ROM is totally awesome. Since I don't use Camera of this device that much I love this ROM.

infus38 said:
Yes just flahs lates boot_twrp_root.img
Click to expand...
Click to collapse
Hey,One More Thing-
1-Do I Need To Flash This ROM above Stock ROM Or It Does Not Matter Cause I Am On CM 11 Unofficial Flamingo?
---------- Post added at 09:55 AM ---------- Previous post was at 09:52 AM ----------
Ｄｈｒｕｖ said:
Screenshots
Note I'm using custom launcher and custom theme (flux substratum theme)
My review:- I'm using this ROM from 4 days and this ROM is totally awesome. Since I don't use Camera of this device that much I love this ROM.
Click to expand...
Click to collapse
So,You Have Flashed This ROM.
How Is The Battery Life?
Can You tell Me What are The Features In This ROM (By Features I mean The Features Which are in cm Roms Like Center Clock,Privacy Guard,Performance Profile,Etc)?
Is Substratum Theme Manager Working Fine?
Thanks In Advance.

[ROM] [ 8.1.0 ] Official madOS - Wiko Fever (and clones) [MT6753]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a Official Build of madOS ( based on AOSP Oreo ) for Wiko Fever (2gb ram and 3gb ram) with MTK 6753 SoC and its clones:
Micromax Canvas 5 E481
Blu Life One X
Myphone 36
Qmobilez10
madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
RIL (Calls /SMS, Data connection, etc)
Wifi
Bluetooth
FM Radio
All Sensors
Lights;
Both storages & MTP
HW de/encoding
Camera (photos and video)
GPS & aGPS
Audio
madOS Extras (the features ya'all used too), plus, some new features we added on Oreo)
Not working:
XDA:DevDB Information
madOS_O_FEVER, ROM for all devices (see above for details)
Contributors
DerTeufel1980, fire855, superdragonpt
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: unlocked bootloader, twrp
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2018-03-19
Created 2018-03-13
Last Updated 2018-03-22

First time Install Instructions
0) Preparation
0.1) Backup your important data to PC
0.2) Ensure you are running Wiko Fever Android 6 already (also/especially when your device is not wiko fever, but a clone). If you are not, please update to it, before continuing here (replace the preloader from the wiko rom with your stock one, then use 'firmware upgrade' mode in sp flashtool. NEVER use 'format all + download')
Extra steps, if you are on blu life one x:
https://forum.xda-developers.com/showpost.php?p=76003104&postcount=81
0.3) Download “twrp_wiko_fever_oreo.img“: [url]http://www.mediafire.com/file/e96x8ltlyka392e/twrp_wiko_fever_oreo.img[/URL]
0.4) Download “madOS_8.1.0_fever_2018xxyy.zip“ [url]https://www.facebook.com/MediatekAndroidDevelopers/[/URL]
0.5) Optional, Download “Google Apps (aka Gapps)“: [url]http://opengapps.org/[/URL]. Choose: “ARM64“, “Android 8.1“, “nano“ or “pico“ package
1) Unlock bootloader (if not done already):
1.1) Boot for first time your device. I recommend to NOT register/login/add Wifi/add accounts/etc., because the unlock process DELETES all your data in the device. So to go more fast, skip all, and go directly to SETTINGS. In section ABOUT DEVICE, enable the developer options with eight time picks over “Build number”. Then in SETTINGS/DEVELOPER OPTIONS, enable the option “OEM unlocking” and “USB debugging” (if not enabled already), and choose to alollow usb debugging in the popping up window.
1.2) Boot the device in the BOOTLOADER mode (using ADB: "adb reboot-bootloader"). Execute in your computer the command “fastboot oem unlock”, say YES with “vol+” and “power” buttons. Then select reboot. This ERASES completely your device (factory restore), but the bootloader will be UNLOCKED! Two reboots needed.
2) Flash the recovery and boot to it. (choose option a) if you don't have another TWRP already installed, else choose b))
2.1a) Boot in the BOOTLOADER mode (using ADB: "adb reboot-bootloader").
Then execute command “fastboot flash boot twrp_wiko_fever_oreo.img”;
and then “fastboot reboot” (this is a trick to directly bring you to the newly flashed recovery. You can't boot up your current/stock rom at this point anymore).
2.1b) Boot to your current TWRP. Choose install --> image, and select “twrp_wiko_fever_oreo.img“. Then choose “recovery“ as the target. After few seconds, and succesful installation, hit “back“ several times, then go to “reboot --> recovery“
3) Install
3.0) Optional, but recommended: Go to "Wipe --> Advanced Wipe", click "Cache" and then "Repair or Change File system". Then select "Change File system" and choose "F2FS". Swipe to confirm.
Hit "back" three times (you can again choose a partition to change now). Choose "Data" and do as above.
Hit "back" several times, to get back to the main menu. Choose "Reboot --> Recovery".
3.1) While already in recovery (TWRP), connect your phone to pc, and copy “madOS_8.1.0_fever_2018xxyy.zip“ and the Google Apps to your phone.
3.2) Go to "Wipe", and directly slide the slider to the right.
3.3) Get back to main menu with the "back" button
3.4) Go to "Install" and hit “madOS_8.1.0_fever_2018xxyy.zip“, then uncheck all boxes and hit "Add more zips", now choose the Google Apps.
Confirm installation by swiping the slider to the right.
3.5) Reboot System
Click to expand...
Click to collapse
Follow up Install Instructions
Download rom and gapps
boot to recovery
flash rom and gapps
optional: flash superSu/Magisk
reboot system
General F.A.Q.
Q: What the hell is madOS ?
A: madOS, (M.A.D. Team OS), is a ROM based on pure A.O.S.P. with extended capabilities and customizations made by or merge/adapted by M.A.D. Team.
Q: Which recovery should I use for this ROM?
A: Latest M.A.D. TWRP 3.2.1-0 recovery for OREO 8.1.0
Q: How do i flash new recovery ?
A:
1: You can flash it with a scatter file
2: You can simply flash it from the existing twrp recovery: Install> Install image> Select Oreo TWRP> Select "Recovery" as partition to flash.
Reboot to recovery to use new one
Q: Do i need to make full wipes?
A: YES, dont come crying at me, if you didn't .... ;p
Q: What is "full wipes" ?
A: To Wipe : Cache; System; DATA ...
Q: What should i use f2fs or ext4?
A: Both are supported, choose the one you desire
Q: Does this rom have any Theme support
A: Yup, We have working Theme Engine (madOS extras)
Update: On Oreo 8.1.0:
- We have extended Theme support even further ( madLauncher, messaging, etc)
- As well as many fixes
Q: Some translations are missing for my language, can I help?
A: Sure you can, please check our translations repo available here , you can either do a pull request, or if you don't know how to work with git, sent us the XML. Strings for your language ( Check Readme on repo).
Q: I want to report a bug(s) do you have an issue tracker?
A: Yeah... madOS issue tracker
Q: What's working ?
A: Check first Post for current status
Q: App "x" doesn't work, why?
A: Probably not compatible with OREO yet, feedback is welcome
Q: Is the rom rooted?
A: NO, But you can easily root with :
1: Magisk ( v14 onwards.)
2: Super SU ( v2.82 onwards)
IF there are problems in rooting, you need to report it to the root-threads...There's nothing we can do
Q: Should i root together with rom ?
A: Not advised.. mainly the Magisk that gives some weird issues...
Flash ROM and GAPPS (if you use gapps), after first boot get back to recovery and flash your desire rooting method
Q: Does xposed work?
A: Is there Xposed for O? ... then no ;p
Q: How is battery life with Oreo?
A: Pretty awesome
Q: Does this build support Vulcan?
A: No....duh! v
Q: Does doze work in this build?
A: Yup
Q: when will (feature/issue here) be fixed?
A: NO ETA , please
Porting F.A.Q.
No porting support, no port questions allowed on this thread, and porting PMs will be auto-deleted, porting replies will be reported as well
G.APPS F.A.Q.
Q:What GAPPS package should I use?
A: openGapps arm64 nano/pico
Q: How to properly install GAPPS?
A:Flash Rom + Flash Gapps at once
CREDITS and Thanks
madOS Team
Our translators, credits list here
A.O.S.P.
Pure Nexus
AOSPA
DU (Dirty Unicorns)
Omni
HELP supporting madOS
We do this on our free time, however we do have costs on maintaining this :/
Any donation is highly appreciated
You can donate by using
this link
If the above doesn't work in your country, then you can directly donate by using this e-mail adress: [email protected]
About madOS Proprietary Apps
You are NOT allowed by any means, to use our madOS apps on any other build, your rom
This is exclusively for OFFICIAL madOS ROM releases
@To Moderators: Feel free to clean the thread, whenever users start spamming, severe OT, or questioning about porting...

Changelog 19th March 2018:
fixed offline charging
fixed proximity and light sensor
fixed applying smartwake settings after reboot
Facebook release post: https://www.facebook.com/notes/mad/rom-810-official-mados-wiko-fever-mt6753/1640799096003857/

for whatever reason, devDB is not working (very well) at the moment...causing this thread to be shown up, hours after i created it....now it's finally here and updated...and can be used

Thank u so much sir...we owe you?

superdragonpt said:
Android Oreo released
https://forum.xda-developers.com/android/development/rom-official-mados-wiko-fever-clones-t3762804
Click to expand...
Click to collapse
superdragonpt said:
The ROM was made using an Wiko device in the bring up
I know very well this TINNO devices, that are rebranded to many OEMs
In case of baseband (ie: BLU,Qmobile, MMX, you should use your stock baseband modem and place it under vendor/etc)
Cheers
PS: can you, that have other clones ( non-wiko) send us your working baseband?
(This way, we could perhaps just made an flashable zip for baseband or so)
Click to expand...
Click to collapse
Here is firmware folder(baseband) from Life One X with MM update.

Opened an issue about some sensors
https://bitbucket.org/maadteam/mado.../103/some-sensors-light-proximity-not-working

mrmazak said:
Here is firmware folder(baseband) from Life One X with MM update.
Click to expand...
Click to collapse
FERRARI81 said:
Opened an issue about some sensors
https://bitbucket.org/maadteam/mado.../103/some-sensors-light-proximity-not-working
Click to expand...
Click to collapse
Great
This .zip is pushing to system/etc, so this .zip won't work here on Oreo, where everything is moved to vendor/etc
For the time being for the blu, you can either updated the updater-script to push to "vendor" instead of "system" or root it, and move your baseband manually to vendor/etc
About the alsps ( brightness ) what's the sensor used in blu?
We need to enabled it I suppose
Cheers

superdragonpt said:
Great
This .zip is pushing to system/etc, so this .zip won't work here on Oreo, where everything is moved to vendor/etc
For the time being for the blu, you can either updated the updater-script to push to "vendor" instead of "system" or root it, and move your baseband manually to vendor/etc
About the alsps ( brightness ) what's the sensor used in blu?
We need to enabled it I suppose
Cheers
Click to expand...
Click to collapse
So the sensor.lib from Blu?
I will pull it and share.

superdragonpt said:
About the alsps ( brightness ) what's the sensor used in blu?
We need to enabled it I suppose
Cheers
Click to expand...
Click to collapse
Ehm...I have not blue, I have original Wiko Fever
And...I'm noob ...in wich way I could check what's the sensor?

FERRARI81 said:
Ehm...I have not blue, I have original Wiko Fever
And...I'm noob ...in wich way I could check what's the sensor?
Click to expand...
Click to collapse
just because adaptive brightness is not working , does not mean it is the sensor.
If sensor was not working , there is another test (check) you can do.
make a call, then put phone to head and see if screen goes off.
I had before when light sensor was not set correctly, when making a call the screen went black as soon as start a call, then could not get screen back on till 30 seconds after other end hung up the call.
I am away from my LOX now and for few days , so cant give direct test of light sensor.
attached just in case is usefull here are sensor libs from BLU-LOX. They are in /system/lib/hw and /system/lib64/hw.
I believe on oreo they go into /vendor/

Can we flash it over stock Lollipop ROM of Micromax Canvas 5 ??
I have a question that Can I flash it over the stock Lollipop ROM ?? existing kernel is 3.10.65.
Thanks

mrmazak said:
just because adaptive brightness is not working , does not mean it is the sensor.
If sensor was not working , there is another test (check) you can do.
make a call, then put phone to head and see if screen goes off.
I had before when light sensor was not set correctly, when making a call the screen went black as soon as start a call, then could not get screen back on till 30 seconds after other end hung up the call.
Click to expand...
Click to collapse
It doesn't work in call too : the screen is always on.

QUIZILLA said:
I have a question that Can I flash it over the stock Lollipop ROM ?? existing kernel is 3.10.65.
Thanks
Click to expand...
Click to collapse
Please remove the quote of the whole FAQ. This is totally useless to ask your question...
You need to flash wiko mm rom first
FERRARI81 said:
It doesn't work in call too : the screen is always on.
Click to expand...
Click to collapse
I'll check it today

Hello, I write from Padova, Italy,
I have the WIKO FEVER 3GB,I have the problem that after upgrading to MM (Android 6.0), device not connects to PC and no charge. The device is recognized ONLY if it turns off.
Can I do this update procedure with this problem?
I can not connect to the PC because device is not recognized. Can you help me? Can I root through an app installed by the playstore without using pc? Thank you so much for the answers.
Riccardo
ianto:

Rikadoo said:
Hello, I write from Padova, Italy,
I have the WIKO FEVER 3GB,I have the problem that after upgrading to MM (Android 6.0), device not connects to PC and no charge. The device is recognized ONLY if it turns off.
Can I do this update procedure with this problem?
I can not connect to the PC because device is not recognized. Can you help me? Can I root through an app installed by the playstore without using pc? Thank you so much for the answers.
Riccardo
ianto:
Click to expand...
Click to collapse
Why root? To update to oreo, you don't need root... But you still need to copy the new rom to your phone, as well as unlock the bootloader and install the twrp recovery. This needs to be done in fastboot mode by pc. I'd suggest to just try it

Unfortunately I am not very experienced, but I am very interested in solving my problem. I want to install this ROM, but without having to connect the device to the PC.
If I copy the ROM on the SD card. Can I then install?

I am in process of installing new oreo twrp and MADOS.
During install of TWRP, I loose adb authorization. (adb session is "unathorized")
in "prop.default" it has
Code:
ro.secure=1
security.perf_harden=1
ro.adb.secure=1
ro.allow.mock.location=0
ro.debuggable=0
is this intentional?
additional question,
Adb authorize connection window comes up multiple times even after putting check mark on remember this choice.
I think the adb auth problem is my pc, my other phone just started to do this too.
edit:
I have tried couple times to use blu firmware inside vendor folder. But not able to get baseband to be known.
tried just adding blu files ontop of original rom files.
tried removing rom files and adding blu files
tried removing whole folder then adding blu folder
each time I get unknown baseband.
I checked permission and ownership each way I tried and I set it to rw:r:r and root:shell just like original rom version, but not working for me.

One and more questions,....
1. Our bootloader is blocked or already unlocked?
2. If is locked, to unlock the bootloader of our device wiko fever which app I have to install?
3 if isn't locked, how I install a custom recovery like twrp manager?
4 how I boot the custom recovery twrp manager? Maybe if I switch off the device and reboot it, starts automatically the custom recovery?
5 at the end, from twrp can I flash the ROM Oreo?
AHH , last question, can I flash this ROM from my phone with Android MM?

mrmazak said:
I am in process of installing new oreo twrp and MADOS.
During install of TWRP, I loose adb authorization. (adb session is "unathorized")
in "prop.default" it has
is this intentional?
additional question,
Adb authorize connection window comes up multiple times even after putting check mark on remember this choice.
I think the adb auth problem is my pc, my other phone just started to do this too.
edit:
I have tried couple times to use blu firmware inside vendor folder. But not able to get baseband to be known.
tried just adding blu files ontop of original rom files.
tried removing rom files and adding blu files
tried removing whole folder then adding blu folder
each time I get unknown baseband.
I checked permission and ownership each way I tried and I set it to rw:r:r and root:shell just like original rom version, but not working for me.
Click to expand...
Click to collapse
Someone already uploaded vendor files for his model... Was it you? If not, please upload it for us

[10] LineageOS 17.1 for z3c

OTA and TWRP recovery
Over the Air Updates
My upload script automatically pushed OTA updates to my GitHub.
If you want to make them visible through the Updater you can flash the attached magisk module LineageOS-17.1_z3c-OTA-v1.zip or add the line
Code:
lineage.updater.uri=https://raw.githubusercontent.com/ArianK16a/OTA/lineage-17.1/z3c.json
manually to your build.prop. You should use the recommended TWRP so that the updates flash fine.
TWRP recovery
TWRP 3.3.1 for our z3c with Android 10!
The TWRP for Android 10 is attached to this post.
Source is available at: https://github.com/z3c-pie/twrp_device_sony_z3c/tree/android-10.0
Changelog for twrp-3.3.1-1-z3c-20191212-sar.img
Improved System as root support, /system is a symlink to /system_root/system now
Changelog for twrp-3.3.1-1-A10.0-z3c.img
Added Bootlogo, booting from offline state will display the original sony logo now instead of nothing
Fixed fastboot boot
Updated kernel cmdline from 23.5.A.1.291
How to install this build:
Reboot to fastboot by holding volume up while connecting your device to your computer
Open a terminal and move to the directory with TWRP in it
Rename the downloaded image to twrp.img
Type
Code:
fastboot flash recovery twrp.img
Boot into TWRP while the device is powered off press the power and volume down button
Feel free to ask questions or give feedback about TWRP here .
Have a nice day!
Additional information about the recovery on this device:
First of all we should make the basics clear: On our Z3 Compact we have got a bootloader update which can boot a recovery from powered off state by pressing volume down and the power button. Because we haven't ever had this updated bootloader and not all sony devices received the update, there have been some intelligent people who brought a special init binary which can handle recovery boots during a normal boot. This means when using advanced reboot from the ROM or pressing a volume key while the sony logo appears at boot. https://github.com/LineageOS/android_device_sony_common/commits/lineage-16.0
To make this work there is this method to extract the ramdisk: https://github.com/LineageOS/androi...eage-16.0/extract_ramdisk/extract_ramdisk.cpp which uses zlib to decompress it. So far so good, zlib can decompress the default compression for recovery ramdisk which is gzip. However LZMA is more effective to reduce the size so we took it's advantage: https://github.com/omnirom/android_...mmit/885b01223a460d3f2500155ea415bdc8573679bc in order to fit recoverys compiled from recent environments (android-9.0 in my case) into our small FOTAKernel partition.
According to this change the init_sony can't handle the recovery boot anymore because it can't decompress the recovery's ramdisk so nailyk and Diewi (as far as i know) added support to decompress LZMA compressed ramdisk's with this chain: https://github.com/sonyxperiadev/device-sony-common-init/pull/20/commits
However these commits have never been merged into the LineageOS/android_device_sony_common nor the sonyxperiadev/device-sony-common-init. Since your ROM, CarbonROM, is using a fork of LineageOS/android_device_sony_common is missing these commits the recovery boot fails with a kernel panic, like this: https://del.dog/egawososux.htm
So you can either use a recovery which doesn't compress the ramdisk with LZMA (for example the one from here: https://forum.xda-developers.com/z3-compact/development/recovery-twrp-3-2-3-0-aries-t3837192 or ask your ROM developer to pick the according commits into the sony_common tree/use my fork of LineageOS's one https://github.com/z3c-pie/android_...mits/fa85dfcc07f42d73f9a1abf1f4c82d8bf0486a93 which would enable you to use recent TWRP builds with a LZMA compressed ramdisk.
I hope i presented it clearly and in the right way,
Have a nice day!
EDIT: Minimized patch for LZMA is available here: https://review.lineageos.org/c/LineageOS/android_device_sony_common/+/252923
Click to expand...
Click to collapse

The new build is up!
Get it from here: https://sourceforge.net/projects/ep...age-17.0-20191002-UNOFFICIAL-z3c.zip/download
Make sure to use the new TWRP from Post #2 because Android 10 introduces System-as-Root which can lead to weird behaviour in the old TWRP.
Note that there are not all features from LineageOS 16.0 ported over yet and there can be unexpected, yet unlisted bugs.
MY personal hardware support list can be found here: https://gist.github.com/ArianK16a/1e46c463a5c910efb322d9cf0e16c3c0 but as always, i can't guarantee you anything!
Happy flashing!

I will try, thx :>
but there are no opengapps for 10,
what about this? will be good?
https://www.cyanogenmods.org/download-gapps-for-android-10/

hah ok now I don`t know anything... ;/
still same problem with this freakin camera and torch exactly like in v16
all my steps:
1.
flashtool64 -> Stock Android 6.0.1 for D5803 - 23.5.A.1.291 - Unbranded - Baltic Generic (1288-5413)
https://forum.xda-developers.com/z3-compact/general/list-stock-firmwares-d5803-d5833-t2906706
2.
TWRP for 6.01 - with this https://forum.xda-developers.com/z3-compact/general/recovery-root-mm-575-lb-t3418714
Kernel .575 -> recovery for mm575 ->kernel .291
3.
installation of yours TWRP - twrp-3.3.1-A10.0-z3c
4. in twrp 3.3.1 wipe cache, dalvik cache, data and system, rom installation
5. camera and torch doesn`t working ;/ "camera keeps stopping" and torch is greyed out

NIce, thank you

hhpl said:
hah ok now I don`t know anything... ;/
still same problem with this freakin camera and torch exactly like in v16
all my steps:
1.
flashtool64 -> Stock Android 6.0.1 for D5803 - 23.5.A.1.291 - Unbranded - Baltic Generic (1288-5413)
https://forum.xda-developers.com/z3-compact/general/list-stock-firmwares-d5803-d5833-t2906706
2.
TWRP for 6.01 - with this https://forum.xda-developers.com/z3-compact/general/recovery-root-mm-575-lb-t3418714
Kernel .575 -> recovery for mm575 ->kernel .291
3.
installation of yours TWRP - twrp-3.3.1-A10.0-z3c
4. in twrp 3.3.1 wipe cache, dalvik cache, data and system, rom installation
5. camera and torch doesn`t working ;/ "camera keeps stopping" and torch is greyed out
Click to expand...
Click to collapse
I don't understand what you are doing after you flashed stock. Can you also format data within my twrp? I have recognised that the /data partition size has been set wrong in most older TWRP's.
hhpl said:
I will try, thx :>
but there are no opengapps for 10,
what about this? will be good?
https://www.cyanogenmods.org/download-gapps-for-android-10/
Click to expand...
Click to collapse
There are GApps: https://sourceforge.net/projects/opengapps/files/arm/beta/20190928/

NeoArian said:
I don't understand what you are doing after you flashed stock. Can you also format data within my twrp? I have recognised that the /data partition size has been set wrong in most older TWRP's.
Click to expand...
Click to collapse
ok I had something in my head that I needed first this marshmallow recovery... I don`t know why
but now I flashed once again 291 and then yours twrp and wiped all the stuff ofc included data and still torch and camera doesn`t work ;/

hhpl said:
I don't understand what you are doing after you flashed stock. Can you also format data within my twrp? I have recognised that the /data partition size has been set wrong in most older TWRP's.
ok I had something in my head that I needed first this marshmallow recovery... I don`t know why
but now I flashed once again 291 and then yours twrp and wiped all the stuff ofc included data and still torch and camera doesn`t work ;/
Click to expand...
Click to collapse
Format is not wipe. Make sure that twrp asks you to confirm by typing yes.

NeoArian said:
Format is not wipe. Make sure that twrp asks you to confirm by typing yes.
Click to expand...
Click to collapse
ok done, once again nothing new, still same situation

Can this ROM be installed on top of LineageOS 16 without wape?

Camera and Bluetooth are fine.
Flashing the only gapps for Android 10 I found made the navbar buttons not to work.
I guess we should wait for better gapps build.
Great anyway, thanks

marcogiannetta said:
Camera and Bluetooth are fine.
Flashing the only gapps for Android 10 I found made the navbar buttons not to work.
I guess we should wait for better gapps build.
Great anyway, thanks
Click to expand...
Click to collapse
Are you talking about the GApps I posted a few posts back? https://sourceforge.net/projects/opengapps/files/arm/beta/20190928/ If I remember correctly I didn't have problems while I tested them...

NeoArian said:
Are you talking about the GApps I posted a few posts back? https://sourceforge.net/projects/opengapps/files/arm/beta/20190928/ If I remember correctly I didn't have problems while I tested them...
Click to expand...
Click to collapse
No, I found a beta version on Google.
Gotta check again with the one you provided, I'll edit this post in a while
Edit: buttons don't work again

marcogiannetta said:
Camera and Bluetooth are fine.
Flashing the only gapps for Android 10 I found made the navbar buttons not to work.
I guess we should wait for better gapps build.
Great anyway, thanks
Click to expand...
Click to collapse
wow, so what I`m doing wrong... could you tell me how you install this rom step by step and what rom you had before? steps before installation and steps after or something, I have installed this rom 10 times and never got my camera work, that is crazy

hhpl said:
wow, so what I`m doing wrong... could you tell me how you install this rom step by step and what rom you had before? steps before installation and steps after or something, I have installed this rom 10 times and never got my camera work, that is crazy
Click to expand...
Click to collapse
The same basic steps you'll find in the OP

marcogiannetta said:
Camera and Bluetooth are fine.
Flashing the only gapps for Android 10 I found made the navbar buttons not to work.
I guess we should wait for better gapps build.
Great anyway, thanks
Click to expand...
Click to collapse
I've experienced the same issue after installing gapps - only back button works. Gesture navigation is working fine.
Other bugs I've noticed:
-battery icon style cannot be changed
-launching camera app with hardware button doesn't work
-system accent color cannot be changed (there is only one option listed)

Barciej33 said:
Other bugs I've noticed:
-battery icon style cannot be changed
-launching camera app with hardware button doesn't work
-system accent color cannot be changed (there is only one option listed)
Click to expand...
Click to collapse
You must read 1st to 3rd post.
LOS17 is just getting started.
Note that there are not all features from LineageOS 16.0 ported over yet and there can be unexpected
Click to expand...
Click to collapse

@NeoArian Any chance for a screen recording of how it runs?

JamesMars said:
@NeoArian Any chance for a screen recording of how it runs?
Click to expand...
Click to collapse
No? If you are interested you can test it yourself.
I have my holidays now anyway.

[ROM][11.0.0][Hima] crDroid 7.12 [Official] ViperFX ready, All M9s should be supported again [18.11.2021]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
crDroid.net - increase performance and reliability over stock Android for your device
official crDroid ROM blog
crdroid.net
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 21.0 or newer for root (after first boot) - (Download from here)
First time installation:
You need Unlocked bootloader for install
step 1 Download crDroid from the link, if you want root then download Magisk also and copy it all to your Phone internel or external your choice.
step 2 Go to recovery when you didnt installed it already download it from the listed link, go in fastboot with all 3 keys pressed hold then select with volume keys Download mode and hit power button,
When youre on Windows download adb minimal and fastboot here in https://forum.xda-developers.com/showthread.php?t=2317790 install it , open the shortcut on your desktop if one was created when not just serch in Windows for minimal and you will find it.
step 3 Type in the opened command prompt in minimal adb and fastboot: adb devices to check if device was recognized, when not download here the drivers to make sure it works fine https://downloadmirror.co/1LnA/HTC_Driver_v4.17.0.001.zip?pt=SCTaNyN4GCn3NIchsd7q3hM7hBYxuFbGvjQe9voyZY4= run it let it install then type again fastboot devices make sure you see some numbers like FA53WYJ13710 then it works fine and can start flashing.
step 4 Go to your download folder and search for twrp-3.4.0-0-hima.img rename it to twrp.img to make it easier for you to flash. copy the renamed twrp.img to C:/Program Files (x86)/minmal adb and fastboot/
step 5 Type in your Minimal adb Fastboot prompt: flash recovery twrp.img after OK type fastboot reboot bootloader and select with volume keys recovery and hit power button, congrats youre in TWRP recovery
step 6 Now you can make A backup of all your stuff when you have enough Disk space on your Internal or External storage when not make space on your SDcard or Internal storage and copy all your stoff on your Computer to make Space for a backup of your Data =apps and settings System = current Android. when you have Done that part go to install and select the Download Rom install it and if you want root then also The Magisk.zip props go out to https://forum.xda-developers.com/member.php?u=4470081 thanks to him for for his Makgisk root solution :good: and after all installed hit Reboot
Update installation:
You can dirty flash it if youre on android 10 and youre lucky it will start without apps crashing.
If you dont want to get Dirty then you youre fomat Data and System in TWRP and flash the Rom also you can make a Backup current Rom if you want.
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/Claymore1297/android_kernel_htc_msm8994
Download:
ROM crdroid.net
ViperFX Profile for Speaker
Unzip_me_not_flashabel
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
ViperFX is included and fully suporrted,
just disabel AudioFX or turn on legacy mode.
I dont recommand both together couse (loud bugs)
For those peopel who download over phone i suggest to turn Desktop Mode ON in Browser settings to be abel to Download directly.
Known issues:
Only FM not working, if found something
share log and we will see
Visit official website @ crDroid.net
crDroid Community Telegram
Donate to help our team pay server costs
Here some pics
Edit: The rom is newer then the pics, this are just Sampels i created a while ago
https://ibb.co/BjCbGCV
https://ibb.co/HXNCPTh
Thanks to:
- Claymore 1297 and his Team for the work on the M9, without him it wouldn't be possible!
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
ROM OS Version Android 11
ROM Kernel: Linux 3.x
ROM Firmware Required: 4.x
Based On: Lineage
Version Information
Status: Stable
Created 2021-05-11
Last Updated 2021-11-18

Thank you for the great work!
The gapp link is for android 10. Is it good to go on android 11?

Oh, yeah i replaced them. 10 from opengapps not work doe SDK. Nikgapps should work but remember when flash new rom also to flash Nikgapps again , in recovery it will say it will backup and install again but in the end it can lead to bootloop so after a New Build flash Nikgapps again or it will not start. i just looked at Opengapps they dont have 11 there. Or when you want to ungoogel go to /data/app and find vendig or venedig apk and delete it from Recovery in Advanced settings. So it should start without need to flash of Nikgapps

Does not boot for me, even on a clean flash, just reboots with a "TSENS reset" error
Edit : After flashing it like 10 times for whatever reason it booted up just fine, will use it some time and then give you my thoughts
Edit1: After trying to install gapps, the phone crashed on boot with the same error, like 5 reinstalls later, still doesnt work, maybe it could be because my phone is hot, i think TSENS means Temperature SENSor, ill let it cool off a bit.
Edit2: After cooling down the phone shows a different error "KP: EDAC cache: UE instance:cpu7 block L2 'A57 L2 Uncorrectable Error'
This was a very cool rom for the 30 minutes that it worked, i wish i could use it, hopefully you fix these issues.

I wiped everything, installed ROM, but always reboot after logo screen.
firmware 4.16.709.3
twrp 3.4.0.0

Seems very interesting, i tryed before upload and it worked fine by me , but i will now clean flash it and try by my self. I already have the newest build, build and will check these dont forget to thx Claymore to make this possibel

In this rom i have disabled some cores and set some Voltages to enlarge battery and normal performance.
Also i replaced the Camera app to OpenCamera couse this is just a better app for photos and sharpines, also 4k is supported in OpenCamera.

Realy looking forward to the new build, thanks!!
ps: I also flashed twrp3.5.2.9.0, NikGapps, BiTGApps, opengapp test builds...but no luck.

tombbb said:
Realy looking forward to the new build, thanks!!
ps: I also flashed twrp3.5.2.9.0, NikGapps, BiTGApps, opengapp test builds...but no luck.
Click to expand...
Click to collapse
What youre mean with no luck ?

Was it booting before Gapps ?
@tombbb

platinumthis said:
What youre mean with no luck ?
Click to expand...
Click to collapse
I mean the phone doesn't boot into system, keeping reboot.

platinumthis said:
Was it booting before Gapps ?
@tombbb
Click to expand...
Click to collapse
no, I tried only flash Rom, same reboot loop.

tombbb said:
no, I tried only flash Rom, same reboot loop.
Click to expand...
Click to collapse
I've literally just flashed with core nikgapps and using migrate-gpe to restore apps. Done in less than an hour, only error was migrate-gpe couldn't restore chrome. Everything else is flawless. I'd suggest starting over with a ruu firmware flash and start again from vanilla stock.

platinumthis said:
Was it booting before Gapps ?
@tombbb
Click to expand...
Click to collapse
yeah for me too, it did boot one time but after that it never booted again, with gapps or without.

pinckston said:
I've literally just flashed with core nikgapps and using migrate-gpe to restore apps. Done in less than an hour, only error was migrate-gpe couldn't restore chrome. Everything else is flawless. I'd suggest starting over with a ruu firmware flash and start again from vanilla stock.
Click to expand...
Click to collapse
Just FYI, I tried flash lineage 18.1 along with opengapps at last, and it booted normally. But I really want to try crDroid.

tombbb said:
no, I tried only flash Rom, same reboot loop.
Click to expand...
Click to collapse
I've literally just flashed with core nikgapps and using migrate-gpe to restore apps. Done in less than an hour, only error was migrate-gpe couldn't restore chrome. Everything else is flawless. I'd suggest starting over with a ruu firmware flash and start again from vanilla stock.
tombbb said:
Just FYI, I tried flash lineage 18.1 along with opengapps at last, and it booted normally. But I really want to try crDroid.
Click to expand...
Click to collapse
Crdroid worked first time here, no issues. I wipe cache, dalvik/art, data and system. Then line up the zips - rom, nikgapps core, magisk.zip and execute.
It booted first time, in less than 5 minutes. I then opened magisk and allowed it to complete and update. Then booted back to recovery and flashed my migrate-gpe zips and rebooted. No issues at all.
Are you wiping caches after install but before boot? If so, don't. Odexed roms (most are now, I believe) won't boot if caches are wiped, I think the rom needs the art cache to be precompiled and this is deleted with a cache wipe.
All I've got I'm afraid!

pinckston said:
I've literally just flashed with core nikgapps and using migrate-gpe to restore apps. Done in less than an hour, only error was migrate-gpe couldn't restore chrome. Everything else is flawless. I'd suggest starting over with a ruu firmware flash and start again from vanilla stock.
Crdroid worked first time here, no issues. I wipe cache, dalvik/art, data and system. Then line up the zips - rom, nikgapps core, magisk.zip and execute.
It booted first time, in less than 5 minutes. I then opened magisk and allowed it to complete and update. Then booted back to recovery and flashed my migrate-gpe zips and rebooted. No issues at all.
Are you wiping caches after install but before boot? If so, don't. Odexed roms (most are now, I believe) won't boot if caches are wiped, I think the rom needs the art cache to be precompiled and this is deleted with a cache wipe.
All I've got I'm afraid!
Click to expand...
Click to collapse
Also, if Lineage 18.1 boots, maybe try flashing CrDroid over Lineage (same base)? And, as a second-to-last resort (last resort is ruu flash) you could try format data in twrp. This is the bottom right button in the wipe menu - it WILL nuke your internal memory so make sure everything is backed up first. Using a pc you may then have to sideload the rom and gapps using adb, so I'd recommend an sd card. I've solved similar issues in this way.

pinckston said:
Also, if Lineage 18.1 boots, maybe try flashing CrDroid over Lineage (same base)? And, as a second-to-last resort (last resort is ruu flash) you could try format data in twrp. This is the bottom right button in the wipe menu - it WILL nuke your internal memory so make sure everything is backed up first. Using a pc you may then have to sideload the rom and gapps using adb, so I'd recommend an sd card. I've solved similar issues in this way.
Click to expand...
Click to collapse
Thanks for the useful suggestions ! I will first try flash crDroid on lineage and see if it works.
edit: flashed crDroid on lineage, then boot loop again.. I'll see what else I can do...

tombbb said:
Thanks for the useful suggestions ! I will first try flash crDroid on lineage and see if it works.
edit: flashed crDroid on lineage, then boot loop again.. I'll see what else I can do...
Click to expand...
Click to collapse
Did you tried to format /data and then install without gapps ? will this work ?

platinumthis said:
Did you tried to format /data and then install without gapps ? will this work ?
Click to expand...
Click to collapse
I always format data, wipe data,system,cache, install rom, gapp, magisk. But I will try again, maybe flash new build.
What I don't understand is why lineage ROM works?

Development [ROM][Android 11][OP9] crDroid v7 [21 DEC 2021]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
I built this from source because I love crDroid and our main camera doesn't work at all (and other various small nuisances) on the OnePlus 9 Pro crDroid rom. Proceed with caution, this is my first rom. However, things seem stable enough to call it weekly.
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
Pre-installation:
Download LOS recovery
Download Tiny ADB & Fastboot
Download arm64 gapps (tested with NikGapps Canary Core Gapps)
First time installation (clean flash):
It is recommended to come clean from latest OOS installation
Backup your data to PC, OTG flash drive
Reboot to bootloader (fastboot)
Run fastboot devices to confirm there is connection to the phone
Install LOS recovery with following command fastboot flash boot lineage-18.1-20211212-recovery-lemonade.img
Reboot to recovery with following command fastboot reboot recovery
Navigate with volume keys to Factory Reset -> Format data/factory reset and confirm format of data
Go back to main menu and choose Apply update and Apply from ADB
Now adb sideload latest crDroid package with adb sideload crDroid.zip
When asked to confirm flash, do confirm it
Now adb sideload latest gapps package with adb sideload gapps.zip
(if Gapps fails saying it could not mount system, boot to rom, then back to recovery and try sideloading Gapps again)
Sideload push will go up to 47% and fail - no worry is normal
Reboot to system
Update installation:
Through recovery:
Download latest crDroid zip and reboot to recovery
Choose Apply update and Apply from ADB
Now adb sideload latest crDroid package with adb sideload crDroid.zip
Sideload push will go up to 47% and fail - no worry is normal
Reboot to system
Built-in OTA (slower):
Might not work until we are official again.
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sm8350
Download:
ROM https://crdroid.net/lemonade
Changelog:
Changelogs from OP9Pro crDroid since last build should mostly apply:
Initial crDroid 7.13 code base
Updated to December 2021 security patches
Updated to clang 14.0.0
Updated SQLite
Updated libjpeg-turbo
TWRP is included
Some other small changes
Misc fixes and overall improvements
Updated translations
Known issues:
Flashing via USB C Thunderbolt 4 ports may brick your device to edl only mode requiring multiple msm restores to fix.
USB-OTG not working for me at least.
Looking for additional feedback to see.
Visit official website @ crDroid.net
crDroid Lemonade/Lemonadep Telegram
crDroid Community Telegram
Donate to help the crDroid team pay server costs
Donate to buy the maintainer a beer

Reserved

What is the way to go back to normal root 1.2.7.7 if I dont decide to revert back?
Do I still do ADB Sideload even with TWRP?

Don't use twrp for now, use lineageos recovery. When oneplus9 pro crdroid can flash from twrp I will make that ability available here.
If you have a backup made from twrp, I don't see why restoring from it wouldn't work.

Alright sounds good brother.

Glad to see this here for the 9 stoked. I ran on my Verizon variant op8 unlocked for a long time. Very nice.

audalics said:
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
I built this from source because I love crDroid and our main camera doesn't work at all (and other various small nuisances) on the OnePlus 9 Pro crDroid rom. Proceed with caution, this is my first rom.
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
Pre-installation:
Until TWRP is ready, this version of crDroid comes with prebaked core Gapps
Download LOS recovery
Download Tiny ADB & Fastboot
First time installation (clean flash):
It is recommended to come clean from latest OOS installation
Backup your data to PC, OTG flash drive
Reboot to bootloader (fastboot)
Run fastboot devices to confirm there is connection to the phone
Install LOS recovery with following command fastboot flash boot lineage-18.1-20210615-recovery-lemonadep.img
Power off and reboot to recovery by pressing VOL down + Power from shutdown state
Navigate with volume keys to Factory Reset -> Format data/factory reset and confirm format of data
Go back to main menu and choose Apply update and Apply from ADB
Now adb sideload latest crDroid package with adb sideload crDroid.zip
When asked to confirm flash, do confirm it
Sideload push will go up to 47% and fail - no worry is normal
Reboot to system
Update installation:
Through recovery:
Download latest crDroid zip and reboot to recovery
Choose Apply update and Apply from ADB
Now adb sideload latest crDroid package with adb sideload crDroid.zip
Sideload push will go up to 47% and fail - no worry is normal
Reboot to system
Built-in OTA (slower):
When ready
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sm8350
Download:
ROM https://www.dropbox.com/s/xkd5augxh37cfdk/crDroidAndroid-11.0-20210625-lemonade-v7.7.zip
Changelog:
Main camera sorta works
Camera cutout size and position corrected
Fingerprint hardware fixed
Fingerprint ui element fixed
Other various fixes for op9 vs op9pro
Known issues:
Camera app crashes when switching modes or to selfie camera.
Video recording not working.
Looking for additional feedback to see.
Visit official website @ crDroid.net
crDroid Lemonade Telegram
crDroid Community Telegram
Donate to help our team pay server costs
Click to expand...
Click to collapse
Hi why i have ' E:error 21
package is for product oneplus9 but expected oneplus9pro
Even when i have oneplus 9?

papad13 said:
Hi why i have ' E:error 21
package is for product oneplus9 but expected oneplus9pro
Even when i have oneplus 9?
Click to expand...
Click to collapse
You sure you sideloading correctly?

mattie_49 said:
You sure you sideloading correctly?
Click to expand...
Click to collapse
Yes but i flashed the oneplus 9 pro version of 'crdroid' in the begining .
And noew i see in the product name lahaina. I thing this is the oneplus 9 pro name ?

papad13 said:
Yes but i flashed the oneplus 9 pro version of 'crdroid' in the begining .
And noew i see in the product name lahaina. I thing this is the oneplus 9 pro name ?
Click to expand...
Click to collapse
Op9p is pro

papad13 said:
Hi why i have ' E:error 21
package is for product oneplus9 but expected oneplus9pro
Even when i have oneplus 9?
Click to expand...
Click to collapse
I have updated op to include instructions for resetting the device name if you've previously flashed a op9pro rom

I also have the same error. I tried it a hundred times.

illusiveairforce said:
I also have the same error. I tried it a hundred times.
Click to expand...
Click to collapse
Have you flashed the boot.img I added to the op? I also received this error in testing since I had flashed the OP9Pro crDroid build.

illusiveairforce said:
I also have the same error. I tried it a hundred times.
Click to expand...
Click to collapse
Your coming from aospa and it's built for op9 pro. So if you didn't msm between there is your issue.

mattie_49 said:
Your coming from aospa and it's built for op9 pro. So if you didn't msm between there is your issue.
Click to expand...
Click to collapse
I did msm already but no fix for the name

audalics said:
Have you flashed the boot.img I added to the op? I also received this error in testing since I had flashed the OP9Pro crDroid build.
Click to expand...
Click to collapse
Yep you are the man, Thanks. That worked

Yeah I guess I didnt msm. Now I kind of got all screwed up. I had to reset and wipe a bunch of times. fastboot the 1.2.7.7DA and then installed Magisk. Now my phone bootloops FOREVER but then finally gets to the homescreen. im talking like 15-20mins. It actually does the boot screen twice. I am lost. Can someone help me get back to square one?
Should I update local storage and do 1.2.7.7 all over again or what

illusiveairforce said:
Yeah I guess I didnt msm. Now I kind of got all screwed up. I had to reset and wipe a bunch of times. fastboot the 1.2.7.7DA and then installed Magisk. Now my phone bootloops FOREVER but then finally gets to the homescreen. im talking like 15-20mins. It actually does the boot screen twice. I am lost. Can someone help me get back to square one?
Should I update local storage and do 1.2.7.7 all over again or what
Click to expand...
Click to collapse
Msm now if one is available for your variant. Or use fastboot stock rom in the threads.

ok please help me out.
So I do adb devices and my device shows up.
i do adb reboot bootloader, works and goes to Fastboot, but then nothing i type works. I do fastboot boot patched_boot_11.2.7.7.LE25DA.img and it just waiting for device.
Now heres another. When I turn my game on, Pubg mobile. It says please enable permissions and I do it. But it still says media only. wont let me do files. i dont get it. Is it cause I accidently mounted system or something.
Please help

illusiveairforce said:
ok please help me out.
So I do adb devices and my device shows up.
i do adb reboot bootloader, works and goes to Fastboot, but then nothing i type works. I do fastboot boot patched_boot_11.2.7.7.LE25DA.img and it just waiting for device.
Now heres another. When I turn my game on, Pubg mobile. It says please enable permissions and I do it. But it still says media only. wont let me do files. i dont get it. Is it cause I accidently mounted system or something.
Please help
Click to expand...
Click to collapse
Make sure your instructions call for fastboot boot <img> instead of fastboot flash boot <img>, mixing up the two would cause issues.
As for the Pubg issue with permissions, I am unsure of what you mean.

Database Info

welcome