Phone is Poco F2 Pro, beyond economical repair
Windows 10 can see it via bluetooth but can't receive files
Have tried various data recovery trials but none can overcome non ADB
Have tried installing Qualcomm Drivers & ADB (but go error code 10) on PC
Mi Suite sees phone but asks me to update the phone (which I can't do)
Is there anyway to get a video out or get over the ADB limitation?
strocky said:
Phone is Poco F2 Pro, beyond economical repair
Windows 10 can see it via bluetooth but can't receive files
Have tried various data recovery trials but none can overcome non ADB
Have tried installing Qualcomm Drivers & ADB (but go error code 10) on PC
Mi Suite sees phone but asks me to update the phone (which I can't do)
Is there anyway to get a video out or get over the ADB limitation?
Click to expand...
Click to collapse
If the screen is cracked and you can see the interface and you can connect the mouse to a usb, you will also have the option of installing MyPhoneExplorer Client. You have a chance to watch the phone screen in MyPhoneExplorer for PC and manage the backup.
MyPhoneExplorer Client starts automatically after installation, even after a system restart and is always ready to connect to MyPhoneExplorer.
ze7zez said:
If the screen is cracked and you can see the interface and you can connect the mouse to a usb, you will also have the option of installing MyPhoneExplorer Client. You have a chance to watch the phone screen in MyPhoneExplorer for PC and manage the backup.
MyPhoneExplorer Client starts automatically after installation, even after a system restart and is always ready to connect to MyPhoneExplorer.
Click to expand...
Click to collapse
Unfortunately the screen & touch functions are totally dead (my daily alarm has been playing on a loop this morning lol)
I'm going to try and boot into custom recovery mode and use ADB via CMD to access my files (doubt this will work as I have the standard ROM om the machine (4m34s into the video below)
I've edited the thread title as I can see it was misleading, thanks for the reply though much appreciated
So hitting a brick wall, I assume with a stock Poco ROM I won't have access to an ADB enabled boot?
Would it be possible to flash a custom ROM and gain ADB access that way?
Or is a replacement or donor screen & digitiser the only way fwd?
In my opinion, you can do nothing without access to the screen or enabled usb debugging in the system.
Decide for yourself about the profitability of replacing the display, taking into account that it will be done carefully and nothing else will be spoiled.
Related
My Oneplus One had water damage and the screen shorted. It appears to still be working behind the scenes - I can turn it off and on, it makes sounds and lights for notifications, etc. - but the screen is completely black and unusable. Luckily, most of my stuff was backed up to the cloud, but I still have a few files I'd like to get off it if I can. Does anyone have any idea how?
I had ADB, etc. set up on my Win 7 work computer, so I was going to use that, but whenever I plug it in, the computer wants to download and install an MTP driver, fails to do so, and leaves me unable to access the phone. I tried plugging it into my Win 10 personal computer and it shows up as a "functioning" MTP device in Device Manager, but not in Windows Explorer, so I'm not sure how to access anything on it. I installed the Samsung ADB drivers but it won't let me update the drivers for my MTP device at all, so I don't know how to associate them with the phone.
After reinstalling some drivers I can get it to connect as MTP. However, I'm not trying to download videos or photos. I'd primarily like to download some saved game files, and see what text messages I may have missed in the 3 weeks or so it took me to get a new phone (I had a temp phone with a different number during that time). Does anyone have any idea how I can do this? Is there a way to use the computer to switch the connected mode or to pull this info while in MTP?
Hi all,
someone bought me a damaged (screen cracked and not usable) phone, and they want to get their photos off the device. But in order for me to even interact with the phone via terminal, or use any recovery app on computer, the adb option must be enabled! now this is where the problem is, cuase how can i enable the adb option when i am flying blind with no screen?!
SO my question is this. Is there a way to connect the phone via the cable and push a command to the phone to enable adb option?
The other problem when connecting the phone is that all that comes up when you connects to the computer is the drive to install the drivers, and not the other drives for the system. SO maybe even a way to send a commnad to the phone to enable data connection so can get access to phone internal memory?
I'm helping a friend who needs backup of her broken phone for an upcoming court case.
I need to extract all photos (camera, snapchat etc) and text messages (sms/mms).
The phone seems to be working other than the screen and touch controls.
Replacing/repairing the screen isn't an option as we both have minimal funds, and my friend has a new phone already)
i have "access" to the phone, but neither USB Debughing nor MTP is enabled so i cannot access any files.
I'm able to unlock it with a keyboard connected (i hear the little unlock click after entering the pin, and the "turn off screen" click when i press the power button.) But i have to navigate blindly, and any guide i find seems arbitrary how to get to settings, it says to press win+n (same as pulling down the quick settings menu from home) and press tab an arbitrary number of times to get to the settings gear in the corner. i tried doing this on my own working note 10 plus with the external keyboard, but i see it scrolls through every notification, so unless you know the number of notifications, hitting the gear is just pure luck.
I have also tried hooking up a usb-c to hdmi dongle (which works and starts dex on my n10+) but it says no signal on the A80, so external monitor seems out of the question.
Is there a consistent way to enter settings, or any way to enable the following settings:
* enable voice assistant (accessibility settings so i can hear where i am and navigate using voice/sound)
* enable USB MTP (or similar so i atleast can access files from a computer)
* enable USB debugging (to use ADB to screenmirror and/or etc)
* alternatively clear notifications so entering settings should become consistant with number of keypresses
I have tried some apps like dr fone but it doesnt support backup from this model, and any other settings wants to wipe the phone.
I have tried holding both volume buttons to enable google voice assist, but also unsure if this ever worked
The phone is not on wifi and i am not 100% sure if wifi is enabled at the moment, nor if it has the current wifi password my friend uses, but i can try do do things from there if internet access will help.
I dont think google now nor bixby (if this phone has that) is enabled as i dont get any reply or voice ding while pressing the win key (home button normally on working android)
I think i can enter recovery and download modes, i got COM5 on odin, but I'm unsure if i ever get into recovery menu.. but even then, is there any custom recovery firmware that will enable usb mtp access at all for this device?
Also, I'm not able to have a computer connected at the same time as a keyboard as I'm using a wired keyboard with OTG adapter.
Tl;dr:
Have:
* A80 with broken unresponsive screen.
* Have access blindly through otg keyboard
Need:
* Need to enable mtp and/or usb debug (alt. Voice assist)
* Need consistent way to access settings
Both MUST be done using only wired otg keyboard.
Tried:
* Hdmi out (no signal)
* computer recovery software (no dice)
* having computer and keyboard connected simultaneously (keyboard works, pc doesnt recognize, could be dongle)
Hope someone can help me (us) fast.
enter adb
almeria53 said:
enter adb
Click to expand...
Click to collapse
please read the post.
Changis said:
Tl;dr:
Have:
* A80 with broken unresponsive screen.
* Have access blindly through otg keyboard
Need:
* Need to enable mtp and/or usb debug (alt. Voice assist)
* Need consistent way to access settings
Both MUST be done using only wired otg keyboard.
Tried:
* Hdmi out (no signal)
* computer recovery software (no dice)
* having computer and keyboard connected simultaneously (keyboard works, pc doesnt recognize, could be dongle)
Hope someone can help me (us) fast.
Click to expand...
Click to collapse
have you been able to verify that the MTP device actually works with other phones?
those things can be picky
youdoofus said:
have you been able to verify that the MTP device actually works with other phones?
those things can be picky
Click to expand...
Click to collapse
USB MTP is just file tranfer?
F.ex. if i use smartswitch on pc, it first tells me to unlock the phone, if i unlock the phone with the otg keyboard and reconnect it it says i cannot tranfer files because MTP is not enabled in settings.
Changis said:
USB MTP is just file tranfer?
F.ex. if i use smartswitch on pc, it first tells me to unlock the phone, if i unlock the phone with the otg keyboard and reconnect it it says i cannot tranfer files because MTP is not enabled in settings.
Click to expand...
Click to collapse
sorry man, i meant MHL adapter.
As far as i found out, A8 does not support MHL/HDMI out..
guess ill spend the weekend to try to get voice assist working by blind trail and error :/
If anyone could provide screenshots of the settings menu and/or recovery menu (and if its possible to enter without touching the screen, and if so how) that would be greatly appreciated.
The phone should be mostly completely stock set up, but home icons might have moved and menu icons might not be in the same place, but i think the pull down menu should be the same as any stock setup, so a screenshot of that would be nice too
Hi
As far as Android goes, by unlocking the phone and plugging it into a computer then you should be able to view the files on the phone from the PC like any USB drive. What you can also do is use Samsung Smart Switch and do a backup of the phone on a PC as this will be able to pull all text messages, photos, etc into a backup folder. Then you can restore any part of that backup on another Samsung phone, including messages.
There may be a few things that will not transfer over. As far as viewing the photos and other files, you can navigate to the backup folder on the PC and check everything there. This is all provided that the phone actually works and is unlocked.
Havok_2k said:
Hi
As far as Android goes, by unlocking the phone and plugging it into a computer then you should be able to view the files on the phone from the PC like any USB drive. What you can also do is use Samsung Smart Switch and do a backup of the phone on a PC as this will be able to pull all text messages, photos, etc into a backup folder. Then you can restore any part of that backup on another Samsung phone, including messages.
There may be a few things that will not transfer over. As far as viewing the photos and other files, you can navigate to the backup folder on the PC and check everything there. This is all provided that the phone actually works and is unlocked.
Click to expand...
Click to collapse
As stated in my original post, usb-MTP (file transfer) is not enabled by default, and my friend never connected the phone to a computer, so i have to enable it to be able to access anything.
The phone connects and seems to work fine except the display, smart switch says to enable mtp pn the phone to transfer files after i unlock it, so my problem is activating talkback so i have aural navigation help so i can turn on usb/mtp for file transfer(and hopefully adb) or to turn on usb directly, but i think talckback is the highest priority as it will help me navigate the phone and be sure of where i am, an accidental keypress on can ruin a long sequence and i would have to start again from scratch as i cannot know if im in the same location.
Hi.
Any update on this? I have exactly the same problem and no solution so far...
Thanks
Hi,
Basically I have a Samsung S7 Edge (SM-G935F) which the screen is completely smashed on (no display no touch). When I connect it to the PC it detects the phone but it doesn't show the folders inside (can only assume its got a prompt to accept PC or USB debugging isn't enabled).
After a lot of testing with OTG cables keyboards/mouse etc the furthest I got was putting the phone into Recovery Mode (PWR, VOL UP & HOME) then selected APPLY UPDATE ADB.
When I run the ADB in Powershell and run "adb devices" it finds the device ID and says "sideload".
Is there any command I can run to pull the files off my internal DCIM folder (thats all I really need)?
I did read up the only way this could be possible is to install a custom rom (TWP with ODIN?) and then pull files off.
Is this possible and would installing a custom rom delete my internal files as that would render this pointless.
Sorry im new to a lot of this so all my knowledge is just what ive read recently.
Thanks
1. To pull user data USB-debugging must got enabled. May be this method works for you to enable it:
2. To flash TWRP it's required device's bootloader got unlocked - what requires OEM unlock must got enabled . Note: Unlocking bootloader erases all user data.
jwoegerbauer said:
1. To pull user data USB-debugging must got enabled. May be this method works for you to enable it:
2. Once you unlock device's bootloader - what is required to flash TWRP - all user data get lost.
Click to expand...
Click to collapse
Thanks for the reply,
Ok so my only option is the "blind" method.
I have the app installed via Google Play Store on my PC to the device however when I hold down the home button to ask google I hear no reply from her, is there any hotkey to use for this device to ask google or any alternative methods to open this app?
I can see the S7 Edge is connected to my WIFI as it shows on the Sky Hub and IPScanner.
Also is there a way to tell what android interface version I have so I can follow someone on Youtube going into Settings or Apps etc to open the app.
I feel like I am so close to getting these photos off the phone but its just a blind guess at the moment.
I managed to get a hold of a friends S7 Edge, using this I mapped out some keyboard functions to turn on developers options then usb debuggings.
What I have noticed is now when I connect the phone via USB to the PC and run ADB DEVICES it shows up the ID then unauthorised as the status, so I can only assume this means I have USB DEBUGGING ENABLED.
Is this correct?
If so why when I open the Samsung Galaxy in Windows does it still not show the folders, is there another setting I need to turn on/off?
Rowan88 said:
I managed to get a hold of a friends S7 Edge, using this I mapped out some keyboard functions to turn on developers options then usb debuggings.
What I have noticed is now when I connect the phone via USB to the PC and run ADB DEVICES it shows up the ID then unauthorised as the status, so I can only assume this means I have USB DEBUGGING ENABLED.
Is this correct?
If so why when I open the Samsung Galaxy in Windows does it still not show the folders, is there another setting I need to turn on/off?
Click to expand...
Click to collapse
you are confuse you want to view phone content and sd card? you need to change from charging to MTP connection from drop-down notification bar of your device
ineedroot69 said:
you are confuse you want to view phone content and sd card? you need to change from charging to MTP connection from drop-down notification bar of your device
Click to expand...
Click to collapse
I want the internal storage contents of DCIM on the phone.
I followed the steps on my "donor" phone to go into Developer Options > USB Configuration > MTP but all that happens is the phone detects on Windows but wont show me the contents of it.
I also tried changing to PTP but same issue.
I know there is a pop-up that shows on the phone asking to ALLOW THE PC TO ACCESS FILES but I cannot have the USB DATA CABLE and OTG/KEYBOARD plugged in at the same time (and I also tried two OTG adapters both came up MOISTURE DETECTED when using).
So unless anyone knows of a OTG SPLITTER that 100% works with S7 EDGE then I need to find a way to either bypass the ALLOW MESSAGE or manually add my PC to its allow list.
Rowan88 said:
I want the internal storage contents of DCIM on the phone.
I followed the steps on my "donor" phone to go into Developer Options > USB Configuration > MTP but all that happens is the phone detects on Windows but wont show me the contents of it.
I also tried changing to PTP but same issue.
I know there is a pop-up that shows on the phone asking to ALLOW THE PC TO ACCESS FILES but I cannot have the USB DATA CABLE and OTG/KEYBOARD plugged in at the same time (and I also tried two OTG adapters both came up MOISTURE DETECTED when using).
So unless anyone knows of a OTG SPLITTER that 100% works with S7 EDGE then I need to find a way to either bypass the ALLOW MESSAGE or manually add my PC to its allow list.
Click to expand...
Click to collapse
Followed steps again and changed to PTP and FILES ARE NOW SHOWING!!
Happy man!
Thanks for all the help
Rowan88 said:
I want the internal storage contents of DCIM on the phone.
I followed the steps on my "donor" phone to go into Developer Options > USB Configuration > MTP but all that happens is the phone detects on Windows but wont show me the contents of it.
I also tried changing to PTP but same issue.
I know there is a pop-up that shows on the phone asking to ALLOW THE PC TO ACCESS FILES but I cannot have the USB DATA CABLE and OTG/KEYBOARD plugged in at the same time (and I also tried two OTG adapters both came up MOISTURE DETECTED when using).
So unless anyone knows of a OTG SPLITTER that 100% works with S7 EDGE then I need to find a way to either bypass the ALLOW MESSAGE or manually add my PC to its allow list.
Click to expand...
Click to collapse
fully charge your phone and hopefully the heat generated from charging process remove the moisture detected warning or you can also use hair blower to heat your charging port area
also don't put your device on microwave oven unless you want to see some fireworks
I believe this topic should be mostly device agnostic but for details I'm working with a Fire Tablet 10, a year or two old or so, not sure exact revision but OS and recovery are stock and it is not rooted.
In the past I have connected to this tablet over ADB from my PC (device/connection authorized). The screen and digitizer recently broke. I was still able to connect via ADB and I could even use scrcpy to remote in from my PC. I was having trouble inputting the screen unlock because the digitizer was constantly registering inputs all over the screen nonstop. I was able to unlock the screen with adb input text but as soon as I did, the tablet started opening apps, swiping the top panel, etc. I disconnected a few seconds later but in that short time something happened and now I can't get back in with ADB. My PC does recognize the tablet as being connected but can not even access typical files and folders (no files or folders show up at all). I suspect that one of the registered inputs was in the top panel like changing the usb mode to charge-only or even worse; disabled usb debugging. I have since opened it up and disconnected the screen and digitizer to prevent this from happening again.
I know the topic is asked a million times 'can I get back in if I never enabled usb debugging' but I can't find any answers for my situation where my computer should still be in the authorized devices list on the tablet, just lacking the debug interface being enabled (or something similar). I am not against buying some hardware/adapter to connect to an external display but I haven't found anything yet that will be plug-and-play out-of-the-box (all I've found so far need ADB or an app installed).
My question is: Can I do anything to re-enable standard ADB/USB debugging (or maybe ADB over IP) to get back in if I have a computer that should still be authorized?
Thank you all in advance for any advice or suggestions.
you could try to inject init.rc service
Code:
settings put global adb_enabled 1
or edit default.prop in boot (if not symlink to /system)
Code:
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
you can modify boot with AIK and flash with mtkclient or SP Flash Tool.
In any case, do a full ROM dump first. Do not try to unlock bootloader, encryption keys are bonded to bootloader lock state (some people claim it's possible to unlock bootloader without data loss, I don't believe).