Related
Hello, in december, one day suddenly i was in the car and i was driving through a zone with a low signal, from that moment, my S6, losed the signal, and died (?). Today, are 2 months that i don't have signal. I have also tried different sim cards, but nothing. After i had this problem, i did a factory reset from the phone, i put a different sim card in the phone and it worked, i saw the carrier, and i received the sms with the internet configuration, after 1 minute i lose the signal, after that, again, the phone didn't wanted to receive signal. i also tried with a romanian SIM (i am from Italy), but nothing, i see the R near the signal bars. if i go in settings and i search the network operators, the phone finds all, but i can't connect (the SIMs in another S6 works). my phone originally had a brand ROM (WIND Italy), so first through Odin i re-flashed it, but nothing. i also tried to flash the fw with no-brand, but nothing. I've tried absolutely all, i did reboot, flight mode, factory reset, Odin, changed sim, i don't know what to do. my model it's the SM-G920F, i have the 5.1.1, i never did root or flashed custom ROMs, the IMEI it's okay. if i go in ''SIM card status'', in Signal strength, the signal moves, but in Service state it displays "Out of service". The curious fact is that, before this happens, the phone worked for 6/7 months normal, without network problems, after i started using this operator (WIND), after a few weeks, it started that crazy story. what can i do? :crying::crying:
Check your imei *#06#
and whats your model
and knox is it still 0x0 or 0x1
tazaga said:
Check your imei *#06#
and whats your model
and knox is it still 0x0 or 0x1
Click to expand...
Click to collapse
checking the IMEI in the keypad, it's the same of the box, my model it's the SM-G920F, my Knox counter it's 0x0
alex3105_ said:
checking the IMEI in the keypad, it's the same of the box, my model it's the SM-G920F, my Knox counter it's 0x0
Click to expand...
Click to collapse
All i see is updating to official marshmallow and hope for the best or visite samsung for fix dont root keep your knox alive...i recommand to visite samsung to fix it because if you try something you can loose knox and you may not fix it after all...viste samsung they will fix it
tazaga said:
All i see is updating to official marshmallow and hope for the best or visite samsung for fix dont root keep your knox alive...i recommand to visite samsung to fix it because if you try something you can loose knox and you may not fix it after all...viste samsung they will fix it
Click to expand...
Click to collapse
thanks, should i wait for the italy Marshmallow update or install the other already existing? because here in Italy, Vodafone has released the update, should i install this one, or maybe the UK or another? i am on the no brand fw.
Flash any stock 6.0.1 from Sammobile(it won't change Your knox counter) and if it doesn't work take it to Your carrier seller or samsung service repair center. They both will either fix it for free of give You a new one. Mostly odin reflash fixes all problems.
ProtoDeVNan0 said:
Flash any stock 6.0.1 from Sammobile(it won't change Your knox counter) and if it doesn't work take it to Your carrier seller or samsung service repair center. They both will either fix it for free of give You a new one. Mostly odin reflash fixes all problems.
Click to expand...
Click to collapse
okay, in past, the flashes i did, i just flashed on Odin without doing factory reset (from system or recovery), or deep clean, should i this time? because updating the fw, it updates the modem part, so i think that i don't have to reset it (?), i don't know, also after i did the update, if the network doesn't works, can i downgrade back to 5.1.1 simply flashing again the fw?
Just make sure you are updating the right rom for your model...dont use another rom for another model...this can get you problems after some times...lets say you flashed vod rom on XEF this will give you ptoblems later mybe loosing imei or signal....and if update ota you get updates for VOD not XEF...its just not right...my advice update right rom for you model look sammobile
tazaga said:
Just make sure you are updating the right rom for your model...dont use another rom for another model...this can get you problems after some times...lets say you flashed vod rom on XEF this will give you ptoblems later mybe loosing imei or signal....and if update ota you get updates for VOD not XEF...its just not right...my advice update right rom for you model look sammobile
Click to expand...
Click to collapse
i chose the French unbranded one, i'm waiting the download to finish
alex3105_ said:
i chose the French unbranded one, i'm waiting the download to finish
Click to expand...
Click to collapse
Let us know how it goes...i have the same problem and didnt had any succes with MM XEF .... the phone works only on 2g and cant connect on 3g or 4g
vraciu4you said:
Let us know how it goes...i have the same problem and didnt had any succes with MM XEF .... the phone works only on 2g and cant connect on 3g or 4g
Click to expand...
Click to collapse
sorry man, it's the same, but at least you have 2G network, i don't have any, i can't connect, i have "only emergency calls". now i'm on the XtreStoLite 3.0 MM rom, but it's always the same. i'm so sad, i will use this phone as tablet
alex3105_ said:
sorry man, it's the same, but at least you have 2G network, i don't have any, i can't connect, i have "only emergency calls". now i'm on the XtreStoLite 3.0 MM rom, but it's always the same. i'm so sad, i will use this phone as tablet
Click to expand...
Click to collapse
i think the problem could be the antennas inside...but i guess the fix is to replace the entire motherboard and that is expensive
vraciu4you said:
i think the problem could be the antennas inside...but i guess the fix is to replace the entire motherboard and that is expensive
Click to expand...
Click to collapse
i don't know, but it's really strange, because when i updated to MM, i had signal for 1min, but i rebooted it immediatly thinking "if it works, works even after the reboot", but it doesn't. i'm sorry, i hope you will resolve your problem
Hi,
This is my first post but, I'm an avid lurker. I am having some issues with my girlfriends 920i. It received an OTA update to marshmallow and ever since it won't read the Sim card. I've tried to flash the official fw through Odin and still having the same problem. Because it doesn't read my Sim card, I have zero access to any mobile network settings.
I am wondering if when they updated the marshmallow, I lost unlock capability.
Also, her imei and sn still match. Most of the problems I see people have are mismatched numbers, and her phone seems fine.
Any help would be greatly appreciated.
So, I checked the firmware that I flashed and it was INS which seems to be the locked version.
I flashed the INU firmware this morning but still not reading my SIM.
I'm out of options at this point, I'm going to go back to lollipop and see how that goes.
Hi,
I am having this issue for my SM G-920I since 2/3 Jan, 2017. I am using fine on US Tmobile network since Oct 2015, but all of a sudden got the no SIM, emergency calls only and continues to stay like this.. I am curious to know if you resolved the issue and how. Thanks for any feedback!
Help me please
I'm having the same issue. Just flashed INS 6.0.1 firmware on my brand new G920I and now i can't get any mobile signal or data. Tried to flash ZTO firmware for my country, but same issue. My phone was fine before flashing INS firmware. IMEI it's fine too. Recovery shows: Applied multi-csc. What can i do? ((((((((((
Kyoo x said:
I'm having the same issue. Just flashed INS 6.0.1 firmware on my brand new G920I and now i can't get any mobile signal or data. Tried to flash ZTO firmware for my country, but same issue. My phone was fine before flashing INS firmware. IMEI it's fine too. Recovery shows: Applied multi-csc. What can i do? ((((((((((
Click to expand...
Click to collapse
Do you also see: " No SIM, Emergency calls only" after rebooting the phone? What's the baseband version ?
upengan78 said:
Do you also see: " No SIM, Emergency calls only" after rebooting the phone? What's the baseband version ?
Click to expand...
Click to collapse
Thank you so much for helping me. Baseband version shows: G920IDVU3EPIF
I see only Emergency Calls Only message
Kyoo x said:
Thank you so much for helping me. Baseband version shows: G920IDVU3EPIF
I see only Emergency Calls Only message
Click to expand...
Click to collapse
Try to connect to Wi-Fi only and once connected, check if there are updates for Software/Firmware.
upengan78 said:
Try to connect to Wi-Fi only and once connected, check if there are updates for Software/Firmware.
Click to expand...
Click to collapse
Already updated and tried to downgrade to 5.1.1, but no sucess. I don't think it's a hw problem, cause it was working before the INS firmware flash, and IMEI number still shows right, no matter what rom i flash (now on MIUI). Can i clean EFS partition and try to flash ZTO firmware again, or i might lost my IMEI and get more problems? Also, wondering if advanced wipe with everything checked on TWRP can help. (data, internal storage, system, sbfs, cache, dalvik cache)
Can you open the phone dialer and enter this code *#*#4636#*#* then clikc Phone Information, and send a screenshot of what you see in the screen (Make sure no IMEI in the screenshot, before you post it here) ? Also check if Radio is OFF or ON.
upengan78 said:
Can you open the phone dialer and enter this code *#*#4636#*#* then clikc Phone Information, and send a screenshot of what you see in the screen (Make sure no IMEI in the screenshot, before you post it here) ? Also check if Radio is OFF or ON.
Click to expand...
Click to collapse
Codes on my dialer doesn't work, but i'm sure the IMEI is right cause it's showing in phone information. Also, radio is on cause when i search for mobile networks the carriers of my country appears on the screen but when i click on then, just appears a message saying that can't connect
Same problem, any solutions?
I had same issue for over a year, you can check details in my thread, resolved by factory warranty motherboard replacement (free of charge, even thou knox was tripped when I bought it, and I told lady in authorised repair shop that i don`t have warranty).
Forgot to mention that I also tried to repair it via Octoplus box, both by me and some other people (wanted a second opinion), DRK fixed, few new certs written, etc.), not only by flashing fw via Odin or Smart Switch.
And I was 99% sure it was hw, turns I was right.
P.S. country dependable: - in some countries they will probably want to sell you a new motherboard in Samsung (happened to me), but in other factory warranty will be accepted (probably, if the phone is not older than 3 yrs I guess)
HI,
I have been on MM for a while and wanted to upgrade my phone to the latest nogut firmware.
So I downloaded latest firmware from sammobile, then did a factory reset, and flashed the phone via odin.
Everything went great, except I can not call or use data.
It shows "Not registered on network."
Can anyone please help fix this?
For your information, the phone was sent to me from Vietnam by a relative.
I downloaded a firmware of my region, Bangladesh from sammobile.
But it is now showing INS as the CSC instead of BNG
Could this be a reason? Do I need to download firmware from Vietnam region instead?
I actually don't remember what was the csc code before upgrading.
Thanks for any kind of input.
Reported lost or stolen, IMEI blocked maybe
*Detection* said:
Reported lost or stolen, IMEI blocked maybe
Click to expand...
Click to collapse
Why would it be reported stolen after all this time?
moreover, My relative sent it with original box, charger cable headset etc with it.
I guess you can't steal a phone with all those accessories.
Anyway I still checked both of the IMEI's here.
http://www.imeipro.info/
both reported clean. Nor sure how authentic this site is though.
The problem appeared as soon as I upgraded the firmware.
If it was reported, then why was it working before?
sorry for the questions, I don't really know much about these.
If anyone else have this issue, I needed to take the phone to a repair shop, where they used octoplus v 2.5.7
A simple click on "network repair" fixed the issue.
Sent from my Nexus 7 using Tapatalk
Hello,
I got the s8+ 1 week ago from a friend, i`m in Romania with romanian sim card and i did not get any ota update.
The phone is unlocked.
I`ve searched the forum and found nothing.
I`m doing somthing wrong?
Olynth said:
Hello,
I got the s8+ 1 week ago from a friend, i`m in Romania with romanian sim card and i did not get any ota update.
The phone is unlocked.
I`ve searched the forum and found nothing.
I`m doing somthing wrong?
Click to expand...
Click to collapse
Manually checking for an OTA update also does nothing?
The latest firmware for ROM is AQK7 with the Nov patch, so it's strange as to why you're not receiving any updates.
Try doing a factory reset, but make sure your SIM card is inserted while the phone is being reset, then go through setup and check for an OTA again.
Thanks, i will try that.
LE: I did a factory reset , i did a manual update and it says i`m on the lastest software (AQJ5 - october)
Anyone else faced this ?
Olynth said:
Thanks, i will try that.
LE: I did a factory reset , i did a manual update and it says i`m on the lastest software (AQJ5 - october)
Anyone else faced this ?
Click to expand...
Click to collapse
Is your Knox warranty counter tripped to 0x1 by any chance?
Also, if you really want the Nov update, you can always flash AQK7 using Odin and you should be getting OTAs after that.
Sent from my SM-G955F
murtaza02 said:
Is your Knox warranty counter tripped to 0x1 by any chance?
Also, if you really want the Nov update, you can always flash AQK7 using Odin and you should be getting OTAs after that.
Sent from my SM-G955F
Click to expand...
Click to collapse
I just checked, knox ix 0x0, system status official, i called samsung trough smart tutor app, they are gonna connect later to the phone and see what`s wrong.
If they dont solve it, i will flash through odin.
It`s very strange, i can`t find anyone with this problem
Thanks !
Olynth said:
I just checked, knox ix 0x0, system status official, i called samsung trough smart tutor app, they are gonna connect later to the phone and see what`s wrong.
If they dont solve it, i will flash through odin.
It`s very strange, i can`t find anyone with this problem
Thanks !
Click to expand...
Click to collapse
Hello,
Did you ever solve this? I have the exact same problem, also an S8 with OXM csc stuck on November 2017 update
What did you end up doing?
Kind Regards,
Erwin
Erwin1976 said:
Hello,
Did you ever solve this? I have the exact same problem, also an S8 with OXM csc stuck on November 2017 update
What did you end up doing?
Kind Regards,
Erwin
Click to expand...
Click to collapse
Yes i`ve solved it.
You need to manualy flash lastest firmware for the region you are in, then you will get updates.
I did not get the updates because phone was bought from italy and when i inserted the romanian sim card, the firmware from italy was different from the firmware from romania.
I used this guide to manualy flash :
https://forum.xda-developers.com/galaxy-s8+/how-to/official-stock-firmware-update-odin-t3582175
Hope this helps, it helped me.
Olynth said:
Yes i`ve solved it.
You need to manualy flash lastest firmware for the region you are in, then you will get updates.
I did not get the updates because phone was bought from italy and when i inserted the romanian sim card, the firmware from italy was different from the firmware from romania.
I used this guide to manualy flash :
https://forum.xda-developers.com/galaxy-s8+/how-to/official-stock-firmware-update-odin-t3582175
Hope this helps, it helped me.
Click to expand...
Click to collapse
I'm having the same problem with not getting OTA. The phone is a grey import from India. I'm living in Thailand, my region is Thailand, my sim is Thai. Do I have to CLEAN flash the THL firmware or can I dirty flash on top of the firmware from India? I would hate to lose all my data...
Sorru error
Hello peeps, i have installed the latest firmware for the SM-G930F from Belgium (G930FXXS3ERL4_G930FVFG3ERJF_PRO) but somehow the carrier apps from vodafone get installed when booting into the system even though the Proximus app should be installed... I have tried to reinstall it multiple time and still have the same outcome? had this problem with my S6 Edge in the past too but i fixed it somehow (I didn't fix it but it fixed itself tho XD)
VoidedKN0X said:
Hello peeps, i have installed the latest firmware for the SM-G930F from Belgium (G930FXXS3ERL4_G930FVFG3ERJF_PRO) but somehow the carrier apps from vodafone get installed when booting into the system even though the Proximus app should be installed... I have tried to reinstall it multiple time and still have the same outcome? had this problem with my S6 Edge in the past too but i fixed it somehow (I didn't fix it but it fixed itself tho XD)
Click to expand...
Click to collapse
There is only one reason this happens, the firmware is not an unbranded international version.
Complete waste of time messing about with Belgian, French,German version etc just Download the BTU firmware from sammobile or direct from Samsung. It's says United Kingdom but it's basically western Europe unbranded.
cooltt said:
There is only one reason this happens, the firmware is not an unbranded international version.
Complete waste of time messing about with Belgian, French,German version etc just Download the BTU firmware from sammobile or direct from Samsung. It's says United Kingdom but it's basically western Europe unbranded.
Click to expand...
Click to collapse
So if i download and install the BTU version what will be different rom the belgian software? Like i remember with my s4 i used to install BTU firmware all the time because there wasn't one for belgium, but didn't notice anything different with my sim card... so i hope this will be the same that i still have the functionallity like i had before i flashed custom roms
VoidedKN0X said:
So if i download and install the BTU version what will be different rom the belgian software? Like i remember with my s4 i used to install BTU firmware all the time because there wasn't one for belgium, but didn't notice anything different with my sim card... so i hope this will be the same that i still have the functionallity like i had before i flashed custom roms
Click to expand...
Click to collapse
The BTU stock holds all the csc codes, base bands, network functions for all of the European region which means once it connects to the network in your country, it automatically detects which system files to use so you "don't notice anything different" than if you had installed country specific like Belgian.
There is always one stock which hold everything for a region, in Europe its the UK unbranded, generic, international, BTU version. It works everywhere in Europe.
okay so i've installed the btu version and it worked just fine, except it was a little slower and idk why. but when i tried to use mobile networks it wouldn't work so i checked my apn settings and my provider wasn't in there so i had to add it manually wich for me turned into an even slower experience on my phone... I really don't know what i did wrong or what happend, so is it possible to get a detailed instruction to flash the stock oreo rom? and also a how to for rooting stock oreo with magisk? because my guess would be that something went wrong when rooting
VoidedKN0X said:
okay so i've installed the btu version and it worked just fine, except it was a little slower and idk why. but when i tried to use mobile networks it wouldn't work so i checked my apn settings and my provider wasn't in there so i had to add it manually wich for me turned into an even slower experience on my phone... I really don't know what i did wrong or what happend, so is it possible to get a detailed instruction to flash the stock oreo rom? and also a how to for rooting stock oreo with magisk? because my guess would be that something went wrong when rooting
Click to expand...
Click to collapse
Hello well unfortunately Belgium isn't important enough country to have your own unbranded stock firmware.
APN settings should install automatically when you connect to mobile network in your country.
There is a specific guide to follow to root S7 on Oreo, please google and follow it exactly.
Also BTU is a stock Oreo ROM.