Hello, in december, one day suddenly i was in the car and i was driving through a zone with a low signal, from that moment, my S6, losed the signal, and died (?). Today, are 2 months that i don't have signal. I have also tried different sim cards, but nothing. After i had this problem, i did a factory reset from the phone, i put a different sim card in the phone and it worked, i saw the carrier, and i received the sms with the internet configuration, after 1 minute i lose the signal, after that, again, the phone didn't wanted to receive signal. i also tried with a romanian SIM (i am from Italy), but nothing, i see the R near the signal bars. if i go in settings and i search the network operators, the phone finds all, but i can't connect (the SIMs in another S6 works). my phone originally had a brand ROM (WIND Italy), so first through Odin i re-flashed it, but nothing. i also tried to flash the fw with no-brand, but nothing. I've tried absolutely all, i did reboot, flight mode, factory reset, Odin, changed sim, i don't know what to do. my model it's the SM-G920F, i have the 5.1.1, i never did root or flashed custom ROMs, the IMEI it's okay. if i go in ''SIM card status'', in Signal strength, the signal moves, but in Service state it displays "Out of service". The curious fact is that, before this happens, the phone worked for 6/7 months normal, without network problems, after i started using this operator (WIND), after a few weeks, it started that crazy story. what can i do? :crying::crying:
Check your imei *#06#
and whats your model
and knox is it still 0x0 or 0x1
tazaga said:
Check your imei *#06#
and whats your model
and knox is it still 0x0 or 0x1
Click to expand...
Click to collapse
checking the IMEI in the keypad, it's the same of the box, my model it's the SM-G920F, my Knox counter it's 0x0
alex3105_ said:
checking the IMEI in the keypad, it's the same of the box, my model it's the SM-G920F, my Knox counter it's 0x0
Click to expand...
Click to collapse
All i see is updating to official marshmallow and hope for the best or visite samsung for fix dont root keep your knox alive...i recommand to visite samsung to fix it because if you try something you can loose knox and you may not fix it after all...viste samsung they will fix it
tazaga said:
All i see is updating to official marshmallow and hope for the best or visite samsung for fix dont root keep your knox alive...i recommand to visite samsung to fix it because if you try something you can loose knox and you may not fix it after all...viste samsung they will fix it
Click to expand...
Click to collapse
thanks, should i wait for the italy Marshmallow update or install the other already existing? because here in Italy, Vodafone has released the update, should i install this one, or maybe the UK or another? i am on the no brand fw.
Flash any stock 6.0.1 from Sammobile(it won't change Your knox counter) and if it doesn't work take it to Your carrier seller or samsung service repair center. They both will either fix it for free of give You a new one. Mostly odin reflash fixes all problems.
ProtoDeVNan0 said:
Flash any stock 6.0.1 from Sammobile(it won't change Your knox counter) and if it doesn't work take it to Your carrier seller or samsung service repair center. They both will either fix it for free of give You a new one. Mostly odin reflash fixes all problems.
Click to expand...
Click to collapse
okay, in past, the flashes i did, i just flashed on Odin without doing factory reset (from system or recovery), or deep clean, should i this time? because updating the fw, it updates the modem part, so i think that i don't have to reset it (?), i don't know, also after i did the update, if the network doesn't works, can i downgrade back to 5.1.1 simply flashing again the fw?
Just make sure you are updating the right rom for your model...dont use another rom for another model...this can get you problems after some times...lets say you flashed vod rom on XEF this will give you ptoblems later mybe loosing imei or signal....and if update ota you get updates for VOD not XEF...its just not right...my advice update right rom for you model look sammobile
tazaga said:
Just make sure you are updating the right rom for your model...dont use another rom for another model...this can get you problems after some times...lets say you flashed vod rom on XEF this will give you ptoblems later mybe loosing imei or signal....and if update ota you get updates for VOD not XEF...its just not right...my advice update right rom for you model look sammobile
Click to expand...
Click to collapse
i chose the French unbranded one, i'm waiting the download to finish
alex3105_ said:
i chose the French unbranded one, i'm waiting the download to finish
Click to expand...
Click to collapse
Let us know how it goes...i have the same problem and didnt had any succes with MM XEF .... the phone works only on 2g and cant connect on 3g or 4g
vraciu4you said:
Let us know how it goes...i have the same problem and didnt had any succes with MM XEF .... the phone works only on 2g and cant connect on 3g or 4g
Click to expand...
Click to collapse
sorry man, it's the same, but at least you have 2G network, i don't have any, i can't connect, i have "only emergency calls". now i'm on the XtreStoLite 3.0 MM rom, but it's always the same. i'm so sad, i will use this phone as tablet
alex3105_ said:
sorry man, it's the same, but at least you have 2G network, i don't have any, i can't connect, i have "only emergency calls". now i'm on the XtreStoLite 3.0 MM rom, but it's always the same. i'm so sad, i will use this phone as tablet
Click to expand...
Click to collapse
i think the problem could be the antennas inside...but i guess the fix is to replace the entire motherboard and that is expensive
vraciu4you said:
i think the problem could be the antennas inside...but i guess the fix is to replace the entire motherboard and that is expensive
Click to expand...
Click to collapse
i don't know, but it's really strange, because when i updated to MM, i had signal for 1min, but i rebooted it immediatly thinking "if it works, works even after the reboot", but it doesn't. i'm sorry, i hope you will resolve your problem
Related
Hi everyone,
I flashed the leaked ROM I9505XXUFNA5 to my GT-I9505 LTE back in January when it came out, all went fine. However, now when I try to flash the official Android 4.4.2, say I9505XXUFNB8, via odin v3.09 the process will fail after 20 seconds and I have to flash the leaked ROM again in order to have a functioning phone. My phone is carrier free and it is not rooted.Can anyone help me please !
Thank you in advance,
MaximusDacicus
MaximusDacicus said:
Hi everyone,
I flashed the leaked ROM I9505XXUFNA5 to my GT-I9505 LTE back in January when it came out, all went fine. However, now when I try to flash the official Android 4.4.2, say I9505XXUFNB8, via odin v3.09 the process will fail after 20 seconds and I have to flash the leaked ROM again in order to have a functioning phone. My phone is carrier free and it is not rooted.Can anyone help me please !
Thank you in advance,
MaximusDacicus
Click to expand...
Click to collapse
You just killed your EFS :/
You still got a chance:
you can stay with the leaked rom, but you will have to install the latest "modem" (included in rom failed to install) while you keep the romactually installed
thats the only way it can be lucky and may be EFS get back to work may be. I suppose you dont have any EFS backup, so if restoring it fails that way --> you will have to get it repaired. Will be at least 40$ i think...
There a many posts on xda about EFS, but once gone, it is gone. Feel free to read some hours about it
LS.xD said:
You just killed your EFS :/
You still got a chance:
you can stay with the leaked rom, but you will have to install the latest "modem" (included in rom failed to install) while you keep the romactually installed
thats the only way it can be lucky and may be EFS get back to work may be. I suppose you dont have any EFS backup, so if restoring it fails that way --> you will have to get it repaired. Will be at least 40$ i think...
There a many posts on xda about EFS, but once gone, it is gone. Feel free to read some hours about it
Click to expand...
Click to collapse
1. IMEI code is not messed up (it's the same as the one on on the package);
2. I still have carrier signal;
3. I can lock the sim card by pin code
Do you know other signs that would lead to the conclusion that the EFS file is broken ?
MaximusDacicus said:
1. IMEI code is not messed up (it's the same as the one on on the package);
2. I still have carrier signal;
3. I can lock the sim card by pin code
Do you know other signs that would lead to the conclusion that the EFS file is broken ?
Click to expand...
Click to collapse
Mohahah "My phone is carrier free " <-- thought you can-'t get carrier signal anymore lol.
So you're fine i suppose
sry for making trouble. I just missunderstood your writing.
Means you just want to get "back to the root" ?
LS.xD said:
Mohahah "My phone is carrier free " <-- thought you can-'t get carrier signal anymore lol.
So you're fine i suppose
sry for making trouble. I just missunderstood your writing.
Means you just want to get "back to the root" ?
Click to expand...
Click to collapse
Carrier free it means that my phone it's not sim locked in any network. My phone is working fine. I just want to install an official ROM not to stay with the leaked one. I want to install the one for my country so that when I connect to samsung kies via PC the csc and pda of my phone to match up in order to receive updates or to simply for KIES to recognise my phone. The bottom line is that I find it strange that I can't flash 4.4.2 product code COA (Romania) I9505XXUFNB8.
MaximusDacicus said:
Carrier free it means that my phone it's not sim locked in any network. My phone is working fine. I just want to install an official ROM not to stay with the leaked one. I want to install the one for my country so that when I connect to samsung kies via PC the csc and pda of my phone to match up in order to receive updates or to simply for KIES to recognise my phone. The bottom line is that I find it strange that I can't flash 4.4.2 product code COA (Romania) I9505XXUFNB8.
Click to expand...
Click to collapse
what region is the leaked fw for?
It's from the Sammobile, It seems I can't post links.
Country more likely Germany
MaximusDacicus said:
It's from the Sammobile, It seems I can't post links.
Country more likely Germany
Click to expand...
Click to collapse
Thats due to its a branded rom you tried to install (COA = cosmote branded).
Here is the unbranded version you need (ROM = unbranded for your country):
--> http://samsung-updates.com/details/24878/Galaxy_S_4_Snapdragon/GT-I9505/ROM/I9505XXUFNB9.html
The provider specific SIM menu is available, but the tablet shows no signal. Even when it shows one, the signal disappears the moment I try to make a call or am about to receive one. The caller can still hear ringing while the tablet lists the call as missed call.
My father's Galaxy Tab 2 7" automatically tried updating through wifi but failed (I presume), and the SIM functions stopped working.
After many attempts I updated it through OTA to the latest firmware, shown as PDA:NA3 / PHONE:LK1 / CSC:NB1 (INU) in Kies, and the Android version was listed as 4.1.2., but the problem persisted.
I tried to wipe cache. It didn't sort the problem.
Then I Installed CWM 6.0.7 and Cyanogenmod 10.1 (JB 4.2.2) using this tutorial: wiki.cyanogenmod.org/w/Install_CM_for_p3100
Still it can't make or receive calls.
Baseband version is listed as p3100ddclk1
What to do?
Is this a hardware or firmware problem?
Hey brother,
Even I am facing the same order on my tab but in a different way. I can recieve signal for the carrier Tata Docomo but other carrier are showing any sign of life
But sometimes while on tata docomo , I lost signals while using data or when I got a call. And one more thing, I was on a trip to a hill station and there I was getting signals from Vodafone perfectly (my main service provider). But when I came back from there I ain't receiving any peice of signals from vodafone and Docomo is working as usual with few network losses during the day.
PS.- I ain't received any solution yet, still sticking up with that problem.
PPS.- The tab I brought is in used condition with the fact that the tab has that problem in it. (I need not to pay much lol)
Btw I think if we can flash new firmware (official) with odin with modem file, It may sokve our problem. TRY FLASHING FIRMWARE, I cant as I am low on speed
xanubhavx said:
Hey brother,
Even I am facing the same order on my tab but in a different way. I can recieve signal for the carrier Tata Docomo but other carrier are showing any sign of life
But sometimes while on tata docomo , I lost signals while using data or when I got a call. And one more thing, I was on a trip to a hill station and there I was getting signals from Vodafone perfectly (my main service provider). But when I came back from there I ain't receiving any peice of signals from vodafone and Docomo is working as usual with few network losses during the day.
PS.- I ain't received any solution yet, still sticking up with that problem.
PPS.- The tab I brought is in used condition with the fact that the tab has that problem in it. (I need not to pay much lol)
Btw I think if we can flash new firmware (official) with odin with modem file, It may sokve our problem. TRY FLASHING FIRMWARE, I cant as I am low on speed
Click to expand...
Click to collapse
@xanubhavx Where can I download the modem file for P3100?
asraf5285 said:
@xanubhavx Where can I download the modem file for P3100?
Click to expand...
Click to collapse
I am not sure about the Model file alone but you can download whole firmware from sammobile.com, they have firmware of all Samsung devices region wise, just login to enjoy better speed.
Hope this helps.
xanubhavx said:
I am not sure about the Model file alone but you can download whole firmware from sammobile.com, they have firmware of all Samsung devices region wise, just login to enjoy better speed.
Hope this helps.
Click to expand...
Click to collapse
i already download the firmware for Malaysia and how to get the modem file from it? Should I extract it and search in?
First of all, sorry if this has been answered here, I simply can't find a definitive answer for our S6, let me explain better.
As you may know, I'm not a newbie here or in other forums, I've rooted most of my phones (Not this one) and have installed custom roms dozens of times to all of them, BUT, I'm definitely a newbie about what I need here, I'm trying to see if I can change my SM-G920i region from XSA (Australia) to any other one, India in this case. I have read tons of threads and posts and that's what is confusing me, in some threads there are people saying that they did it and is working great, in that same threads there are people saying that they did it but Knox got tripped, there are others that say that the device is soft bricked and others are saying that they have read somewhere that changing the CSC from it's original one may brake future Samsung pay.
So, this phone is paid by my office, they allow me to do what I want to it while I'm able to just put it back as it came from factory, so that means that I can root it if it doesn't trip Knox, that I can install anything while I can simply go back anytime they need me to, and obviously, Samsung pay works when it finally comes. With this in mind, can somebody answer me a couple of questions?
1-) I know it's possible to do it, but is it true that by doing this I'll have Samsung pay issues? I doubt that knox will be tripped if I do it with odin, but besides knox, is there any possibility that Samsung Pay will not work in certain regions (India in this case) and that's why some are saying that it will break it?
2-) If I download the firmware and flash it via Odin, I'm reading that it won't brick the phone is done via Odin, but in worst case scenario I assume that I can always go back to original one and it gets factory reset, am I right?
3-) If I flash it correctly as I expect an it doesn't brick, does this means that it will change PDA and CSC versions all together, that it will basically become a device from the new flashed region? So if I flash the India one to my XSA (Australia) now it will work completely as an India device and should get future OTA like the rest?
Again, sorry if this has been asked and answered but going back a lot of pages here can't give me definitive answer, thanks in advance for those of you kind enough to answer to this.
Flash a G920i ROM via odin other than your own region/country:
http://www.sammobile.com/firmwares/database/SM-G920I/
roydok said:
Flash a G920i ROM via odin other than your own region/country:
http://www.sammobile.com/firmwares/database/SM-G920I/
Click to expand...
Click to collapse
Thanks.
In another thread that I have posted (Brazilian one) I was replied to, so because of that I decided to do it, so far everything is working great as expected. Mine was an Australian baseband (XSA), only thing you I noticed is that when I connect it to Smart Switch app for PC or MAC it will still detects the Original CSC, I was curious about it and installed Phone info apk and it shows correctly the information, both PDA and CSC are now from India but it shows that the Original CSC was XSA (In my case), Firmware's CSC code is INU (India) and Active CSC code it says XSA/INU, so I'm assuming that it's showing multiple CSC.
Does somebody know if having the Active CSC showing XSA/INU causes future OTA issues?
After flashing a ROM its good practice to go to recovery mode and do a full wipe of cache and full reset to change CSC to the default of the ROM you flashed.
roydok said:
After flashing a ROM its good practice to go to recovery mode and do a full wipe of cache and full reset to change CSC to the default of the ROM you flashed.
Click to expand...
Click to collapse
Well, in that case I think I will pass for now, as I did a Full wipe cache and Full reset before the Flash but just did a Wipe cache after I flashed it.
The issue is that I basically just finish setting everything back as it was before (about 3 hours and I still haven't set my Contacts Ringtones and Accounts links) so begin again it's a PITA. Once I finish this I'll do a full nandroid backup to have everything as I want, but if I do the Wipe Data/Full Reset and then restore from the Full backup, does this put everything as it was including CSC again? I've been always confused about how deep this restore goes in the system files. Do you know about it?
Thanks.
Try restoring from your backup after the full wipe from recovery. If everything works then you should be ok. Otherwise start from scratch and reinstall everything one by one.
Will try that later today, thanks.
Goodluck.
roydok said:
Goodluck.
Click to expand...
Click to collapse
I tried that and nothing, still the same, then I decided to remove the Re-activation Lock in Find My Mobile settings, and after that and enter to recovery mode, it changed the CSC to India, so for those of you with same issues, remember about Re-activation lock.
Thanks for your help.
Did you have a SIM card inserted when you flashed your ROM with removed reactivation lock?
I had the SIM card on the phone today all the time as I forgot to bring with me the SIM removal tool and didn't have anything to open the Sim card tray, but last night I didn't have the Sim card installed when I flashed the ROM.
So today after I did the Wipe cache Partition and Data and saw that it still had the same issue, I flashed a UK ROM into a SM-G925f that had some African country ROM (have never heard of it before in my life but for the name it sounded like an African country), anyways I did that and everything went great, so that's when I thought what was different between the devices and then I remember that I had turned on the Reactivation lock in my S6 and not in the S6 Edge, so I turned it off, then went to Recovery mode and for my surprise the CSC was already changed without any other reset or anything.
erasat said:
I had the SIM card on the phone today all the time as I forgot to bring with me the SIM removal tool and didn't have anything to open the Sim card tray, but last night I didn't have the Sim card installed when I flashed the ROM.
So today after I did the Wipe cache Partition and Data and saw that it still had the same issue, I flashed a UK ROM into a SM-G925f that had some African country ROM (have never heard of it before in my life but for the name it sounded like an African country), anyways I did that and everything went great, so that's when I thought what was different between the devices and then I remember that I had turned on the Reactivation lock in my S6 and not in the S6 Edge, so I turned it off, then went to Recovery mode and for my surprise the CSC was already changed without any other reset or anything.
Click to expand...
Click to collapse
can you post a screen of CSC page of Phone ** info ** just for reference?
I see you said that CSC changed to India, but Active CSC or also Original CSC?
What I mean is that, now I have a S6 which has Original, Active CSC as MRU...I'd like to put a European fw on it since I'm based in Europe (got this Middle East / Africa phone just because Dual sim it's not available in europe) but I'm in doubt if putting an european fw will still show that CSC has changed from original one and maybe OTA updates won't work.
thanks
Changing csc!!!
I succesfully installed a G920I indian INU rom in my device which had a XSA rom but when i go to recovery it still shows as XSA ....How do i change that to INU?
Hi i am using a galaxy s6edge+ and i am really struggling with the region lock. I have tried a few options of the factory full reset changing the Apn's to the ones needed and using different sim cards.when it used to go into emergency mode "h+" now it won't connect to any internet at all. Can i possibly have any basic assistance with the rom and resetting options to change the csc when i do a hard reset the csc says it's 'multi'. what does that mean? Any region unlocking help would be appreciated so much!
Thanks guys
Hi,
This is my first post but, I'm an avid lurker. I am having some issues with my girlfriends 920i. It received an OTA update to marshmallow and ever since it won't read the Sim card. I've tried to flash the official fw through Odin and still having the same problem. Because it doesn't read my Sim card, I have zero access to any mobile network settings.
I am wondering if when they updated the marshmallow, I lost unlock capability.
Also, her imei and sn still match. Most of the problems I see people have are mismatched numbers, and her phone seems fine.
Any help would be greatly appreciated.
So, I checked the firmware that I flashed and it was INS which seems to be the locked version.
I flashed the INU firmware this morning but still not reading my SIM.
I'm out of options at this point, I'm going to go back to lollipop and see how that goes.
Hi,
I am having this issue for my SM G-920I since 2/3 Jan, 2017. I am using fine on US Tmobile network since Oct 2015, but all of a sudden got the no SIM, emergency calls only and continues to stay like this.. I am curious to know if you resolved the issue and how. Thanks for any feedback!
Help me please
I'm having the same issue. Just flashed INS 6.0.1 firmware on my brand new G920I and now i can't get any mobile signal or data. Tried to flash ZTO firmware for my country, but same issue. My phone was fine before flashing INS firmware. IMEI it's fine too. Recovery shows: Applied multi-csc. What can i do? ((((((((((
Kyoo x said:
I'm having the same issue. Just flashed INS 6.0.1 firmware on my brand new G920I and now i can't get any mobile signal or data. Tried to flash ZTO firmware for my country, but same issue. My phone was fine before flashing INS firmware. IMEI it's fine too. Recovery shows: Applied multi-csc. What can i do? ((((((((((
Click to expand...
Click to collapse
Do you also see: " No SIM, Emergency calls only" after rebooting the phone? What's the baseband version ?
upengan78 said:
Do you also see: " No SIM, Emergency calls only" after rebooting the phone? What's the baseband version ?
Click to expand...
Click to collapse
Thank you so much for helping me. Baseband version shows: G920IDVU3EPIF
I see only Emergency Calls Only message
Kyoo x said:
Thank you so much for helping me. Baseband version shows: G920IDVU3EPIF
I see only Emergency Calls Only message
Click to expand...
Click to collapse
Try to connect to Wi-Fi only and once connected, check if there are updates for Software/Firmware.
upengan78 said:
Try to connect to Wi-Fi only and once connected, check if there are updates for Software/Firmware.
Click to expand...
Click to collapse
Already updated and tried to downgrade to 5.1.1, but no sucess. I don't think it's a hw problem, cause it was working before the INS firmware flash, and IMEI number still shows right, no matter what rom i flash (now on MIUI). Can i clean EFS partition and try to flash ZTO firmware again, or i might lost my IMEI and get more problems? Also, wondering if advanced wipe with everything checked on TWRP can help. (data, internal storage, system, sbfs, cache, dalvik cache)
Can you open the phone dialer and enter this code *#*#4636#*#* then clikc Phone Information, and send a screenshot of what you see in the screen (Make sure no IMEI in the screenshot, before you post it here) ? Also check if Radio is OFF or ON.
upengan78 said:
Can you open the phone dialer and enter this code *#*#4636#*#* then clikc Phone Information, and send a screenshot of what you see in the screen (Make sure no IMEI in the screenshot, before you post it here) ? Also check if Radio is OFF or ON.
Click to expand...
Click to collapse
Codes on my dialer doesn't work, but i'm sure the IMEI is right cause it's showing in phone information. Also, radio is on cause when i search for mobile networks the carriers of my country appears on the screen but when i click on then, just appears a message saying that can't connect
Same problem, any solutions?
I had same issue for over a year, you can check details in my thread, resolved by factory warranty motherboard replacement (free of charge, even thou knox was tripped when I bought it, and I told lady in authorised repair shop that i don`t have warranty).
Forgot to mention that I also tried to repair it via Octoplus box, both by me and some other people (wanted a second opinion), DRK fixed, few new certs written, etc.), not only by flashing fw via Odin or Smart Switch.
And I was 99% sure it was hw, turns I was right.
P.S. country dependable: - in some countries they will probably want to sell you a new motherboard in Samsung (happened to me), but in other factory warranty will be accepted (probably, if the phone is not older than 3 yrs I guess)
Hi Guys
First of all, i´m sorry my english is not very good and i have to use a Translator.
I recently bought a used SM-G930F. The previous owner had flashed before so although everywhere says SM-G930F in settings in "model information" says "SM-G930FD". Also when a SIM is inserted the "DualSIM Administrator" appears. Had Mashmallow installed and worked perfectly.
I wanted to try flashing the new NOUGAT BTU firmware stock. I did it through ODIN. The process had no errors. When the phone restarted I see that it has no signal. It recognizes that you have a SIM card inserted but "emergency calls only" appears.
The IMEI was not deleted.
Immediately I downloaded a stock firmware from my country ARGENTINA to go back to MARSHMALLOW and I installed it but the same thing is still happening. Then I tried to download another stock firmware from my country and my operator CLARO ARGENTINA, but the same thing is still happening.
I read in forums that the problem may be the modem, but I understand that is modified in the box "CP" of ODIN when flashing.
I honestly do not know what else to do. I also do not remember what firmware I had before doing the whole process.
I understand I should have backed up everything but I did not.
So I ask you please if you can help me.
Thank you very much
dhg2015 said:
Hi Guys
First of all, i´m sorry my english is not very good and i have to use a Translator.
I recently bought a used SM-G930F. The previous owner had flashed before so although everywhere says SM-G930F in settings in "model information" says "SM-G930FD". Also when a SIM is inserted the "DualSIM Administrator" appears. Had Mashmallow installed and worked perfectly.
I wanted to try flashing the new NOUGAT BTU firmware stock. I did it through ODIN. The process had no errors. When the phone restarted I see that it has no signal. It recognizes that you have a SIM card inserted but "emergency calls only" appears.
The IMEI was not deleted.
Immediately I downloaded a stock firmware from my country ARGENTINA to go back to MARSHMALLOW and I installed it but the same thing is still happening. Then I tried to download another stock firmware from my country and my operator CLARO ARGENTINA, but the same thing is still happening.
I read in forums that the problem may be the modem, but I understand that is modified in the box "CP" of ODIN when flashing.
I honestly do not know what else to do. I also do not remember what firmware I had before doing the whole process.
I understand I should have backed up everything but I did not.
So I ask you please if you can help me.
Thank you very much
Click to expand...
Click to collapse
try flashing the specific modem and bootloader of your phone. you might want to try mashmallow modem.
You say I try flash only the modem and bootloader that come included in stock firmware from other countries? Must I only check the boxes "BL" and "CP" from ODIN? Thats correct?
dhg2015 said:
You say I try flash only the modem and bootloader that come included in stock firmware from other countries? Must I only check the boxes "BL" and "CP" from ODIN? Thats correct?
Click to expand...
Click to collapse
I also tested Firmware flash from several countries in America and others, for example Chile, Colombia, Brazil, Mexico, Germany, Portugal. I also tested with some G930FD firmware from Vietman, Singapore, but there was no case. The only thing that stands out is that with Vietnam although no signal, "allowed" the band 4G, did not allow it in all previous cases, do not know if something to see.
u have any issues with wi-fi?? it looks like a modem problwm to me..
Try flashing the stock rom back with the samsung kies program so it will flash back the original stock rom that came with the phone and see if you then have your connection back. If that works then try to flash the BTU.
RiTCHiE007 said:
Try flashing the stock rom back with the samsung kies program so it will flash back the original stock rom that came with the phone and see if you then have your connection back. If that works then try to flash the BTU.
Click to expand...
Click to collapse
Thanks very much for your answer, I tried it as you indicate, but unfortunately it does not work, it still has no signal
lekou said:
u have any issues with wi-fi?? it looks like a modem problwm to me..
Click to expand...
Click to collapse
Hi!
No, the Wi-Fi works fine
Phone is likely IMEI blocked (reported stolen)
Is it possible? I'll find out and tell you. Thank you
dhg2015 said:
Is it possible? I'll find out and tell you. Thank you
Click to expand...
Click to collapse
You're right, I took the phone to a technician and repaired it. Thank you very much for your help.
a.
Or maybe simlock
dhg2015 said:
You're right, I took the phone to a technician and repaired it. Thank you very much for your help.
a.
Click to expand...
Click to collapse
:good: