Hello All,
I'm facing a weird issue on my S10e. After connecting the USB cable to the Windows PC for data transfer, the device will stop responding to data transfer after a minute, unless I restart it again. Get the error 0x80070141 which refers to the device not responding.
I have tried installing updated drivers, run the 'Hardware and Devices' troubleshooter, changed the USB cable and port, restarted the PC. however it does the same, works for a minute and then I cannot transfer anything to and from the PC. it also then stops showing up on Device Manager. Please help me out.
Related
Hello.
Short story: my phone was a little wet and i have some issues with it, mostly i want to get a mass storage to get working. (cant root)
Basically at first the phone didn't even want to charge, when i connected it to the PC windows was giving me an error that the device cannot be recognized, and couldn't install the drivers. (i had Kies installed)
I dried it completely, now the phone turns on without any problem, when i connect it to the pc the phone is recognizing connection (i hear sound + the button backlights are firing up for a sec)
Homever, windows is not detecting any USB device at all, and in about phone/info it says the phone is connected to the AC instead of USB.
When i connect it with USB there is no dropdown in notification to choose from charging, storage etc.
There is also manual usb storage mounting under settings/communication/usb settings , when i'm trying to mount here it just says to connect the phone with usb cable (not detecting connection, homever the backlight + sound is here after connecting, and it's charging)
I tried connecting it with usb debugging on/off even tried to fiddle with in service menu (*#7284#) but nothing.
And since i cannot get the usb storage working basically i cannot flash anything or root it.
Also the USB cable is not a Samsung but an HTC one, could this be a problem? (people in different thread said those cables are the same so it shouldnt be a problem, same amperage, same stick etc.)
Even tried to install MountUSB Widget from market, but it doesn't work when im trying to start the app it's force closing, when i make widget on desktop and press it the phone just vibrate for 1 sec and nothing happens.
When i connect phone with Kies AIR and it works, i mean it shows the storage information, also recognize the phone model correctly, how much free space i have on internal and on SD card but i cannot click "show in explorer" it's greyed out.
Any experts out there could help me? :crying:
Just a blind guess, try a USB cable which supports your device. If it doesn't help, I'm afraid it's a hardware problem and you will have to consult some hardware expert.
Hello everyone.
I am having issues with my Note being detected by my PC, I have installed Kies 3 and when the Note is connected the connection process starts but fails ( I tried using camera mode instead of MTP and Kies says It must be MTP so something is connecting), Also the device is detected in the device manager of the PC and the Note itself says its connected by USB 3.0.
I have updated, un-installed re-installed, all the drivers and Kies. I have also used a standar USB 2 cable and most of the ports on my PC.
Does anyone know what's going on? could it be a USB 3 issue with Windows?
Any help would be appreciated.
Cheers
Gav
I've been having consistent issues connecting with the tablet through adb, on both linux (2 separate installs), and windows 8.1. Sometimes it just will not detect it. It gets detected as mtp storage fine, but adb devices returns nothing. Ill triple check all the relevant settings, make sure the computer has been authorized by the tablet etc. It will literally work just fine, and then 10 minutes later without even disconnecting the cable to using the tablet, it will no longer be detectable by adb.
I'm hoping it's just bugs in the release firmware that haven't been ironed out yet, and will disappear with future upgrades or with the flashing of a custom rom.
I've also had it refuse to charge through my laptops USB ports, even the special "faster charging" port.
It turns out my issue was the unit itself I took it back to JB-HiFi and the staff checked it out and it wouldn't connect to any of their PCs, we tried the Demo unit and it worked fine, So i exchanged it and it works perfectly..
Thanks for your reply though
Cheers
Gav
Hi,
I would like to see if I can get anyones assistance with solving my problem. I have lost the ability to connect my Nexus 5 to my computer via USB. I had previously been able to connect the phone without any problems.
Connecting my phone to PC charges the phone but no drivers are loaded, nothing changes in device manager and I cannot see a change in windows explorer to view the memory card.
So far I have tried the following:
searches on various sites
rebooting phone, starting in safe mode, wiping all data, performing a hard reset
connecting other phones to usb cable to check that it is not a charge only cable, also trying several other USB cables
connecting phone to other computers
connecting other phones (HTC) to load drivers (then uninstalling drivers)
displaying all hidden devices in device manager and removing all drivers that resemble something to do with mobile phones
uninstalling programs I no longer require on the PC
using "wugs nexus root toolkit" to uninstall and re-install drivers
checking & unchecking MTP, PTP, developer options, USB debugging in various combinations to elicit a response from the computer.
I have also tried to visually check the connections of the USB port on the phone wondering is there is a break but I cannot see very well.
does anyone have any further suggestions to get this phone connected to a PC?
my only last thought is to attempt to open the phone and check the resistance of the plug connections.
Have you tried enabling and disabling usb debugging while plugged in?
Sent from my Nexus 5 using Tapatalk
I just did it, no change in Device manager or explorer
tropicalchills said:
I just did it, no change in Device manager or explorer
Click to expand...
Click to collapse
Are you sure you're using a data usb cable and the usb port is good?
Same Issue
same thing happened to me today when i connected the device to PC.
Mine says unknown device on PC under other devices. so i hope my USB port is ok.but im not using the original SUB cable. i wonder that's is the issue. but it didn't bother me until today. my original cable is at my friend's house.
Tried updating drivers manually. But following error message occurs once i select the drivers folder and hit ok.
Windows was unable to install your unknown device
Please help.
so, not really a solution but while at work my phone fell on to a nice rock cracking the screen. I have replaced the phone and the new phone connects to the pc fine, drivers come up without a problem (I will put this down to a fault with the phone)
Thank you for your assistance
Hello,
My Galaxy S6 seems to have trouble with being a storage device, thus not allowing me to sync my files to my phone. I connect it to my phone as a media device, but I keep getting the "this device is currently busy and its contents may not be fully displayed error". I have tried restarting the phone, and plugging the usb cable to a different port. Both have not worked.
Anyone know where the fault could be if at the time I connect my device on the PC neither the connection on the phone nor on the PC appears, I have tried to connect and disconnect on different ports and if it recognizes it but soon it disconnects and tries to connect again but no longer recognizes it
Check device manager while the phone is connected and see if shows up and what it shows up as. You might not have the correct drivers installed, or a bad cable.
bobsright said:
Check device manager while the phone is connected and see if shows up and what it shows up as. You might not have the correct drivers installed, or a bad cable.
Click to expand...
Click to collapse
The problem was due to the cable, I bought a new one and I recognized it without problems