Database Info

[ROM]InfoTM X220 (Flytouch II, WOWpad, SuperPAD)

It is the latest release for SuperPad as well as FLYTOUCH2 and contained the GMS(vending, gmail, gtalk, etc..).
1. prepare:
Please download the burn tools(for windows):
www .megaupload.com/?d=QCPV7V9D
the latest images:
dl.dbank.com/c0px0ishux
that contained fives images: system.img, userdata.img, uImage, ramdisk.img and recovery_rd.img
2. burn new rom:
(1)Open the flash tools
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(2)unzip the download images files. Press "Setting" button and choose the files.
(3)Connect SuperPAD with PC via USB cable, using the first usb socket of the PAD, and press MENU + POWER to bring up PAD to Flash mode. You will see the first device status block become to GREEN.
(4)Press "Start" menu to begin flash ROM.
(5)Burn successfully
3. press "reset" to reboot.

Anyone tried this?

is this custom rom or official?

strazicic said:
is this custom rom or official?
Click to expand...
Click to collapse
It's the official ROM

Ok, thanks,
so it is the last update - I allredy have it on the pad, works good.

What verison is this ?
1001?
1170?
Does wifi work?

it is 1170
Sent from my deb using XDA App

Can I use the same for WOWPAD? Also if anything goes wrong Can I get back to previous factory setting?
Model # dory
FW Version 2.1-update1
Kernel Ver # 2.6.32.9 [email protected] #1
Build # dory-r2.1.925

I just ran this on my wowpad that was stuck at the green wowpad screen. Now it is getting to a calibration option and resetting over and over. I guess that is progress. Is there a different version of the update around for the wowpad? I have another pad that works, is there any way to pull an image from the working device?

Just updated my wowpad to 1170 with full update (using burntool). Everything seems very fast. Top wifi switch now works. Wifi connected without any trouble. Could not browse through ADSL (Ethernet) lan connection. It is showing connected but no browsing. It worked with previous .925 version. Try it tomorrow. Still asking for the license number. Can anyone help me with a license number. I probably threw it away with the box.
[email protected]

My email: [email protected]

I tried it on my other wowpad and it is working fine. It does seem faster and wifi is working like before, I haven't tried much else yet. My second pad froze while playing angry birds and after reboot kept getting stuck on the green screen also so I was forced to try to reflash it. I guess my first one has some hardware problem.

My inglish is very bad ....
Please can you send burntools - v07.5? I don´t search in internet. Anysearch bruntool v07.2.
My tablet is off. My email is [email protected]
Thanks If you don´t send burntools please Link download

Hi singingdrop, any chance in telling me where you found the v07.5 burntool, looked everywhere but no luck, cheers

megaupload.com/?d=QCPV7V9D
you could get the burntools 7.5v from the upper location.

You can have very good instruction and process to upgrade from this "Spanish" site. Just translate it to english. Just add http// @ the beganing. I'm not yet allowed to post link. Delete space after http.
http : / / movileschinos.com/zona-de-charla/tablets-pc/7140-pad-infotm-x220-flytouch-ii-wowpad-superpad-actualizaciones-trucos-apps-etc.html

Upgrade for WOWPad?
Greetings:
I just purchased and received two "wowpads" via DHGATE.com seller and am pleased for the most part with the hardware.
I use OruxMaps to view maps relative to the current position. My goal is to use it in an airplane for background reference against the aeronautical charts that have been scanned and can be cached on the SDCard by using a program Mobile Atlas Creator from live map services for a region of interest.
My only concerns are with the brightness - it is difficult to use with much sunlight and also the lack of ability to turn on and off the GPS receiver. Certain apps will turn it on, and it slowly does find the satellites for positioning - up to 15 mins to triangulate. Then although I can shutdown the calling app for the mapping, it does not turn off the GPS. I tried a widget from the Market to
control the GPS, but it does not respond.
Does anyone know whether the ROM upgrade will fix the GPS on/off control?
Is there an official 2.2 ROM coming?
Doug.

Just updated this way on a flytouch2, it's a bit faster now and wifi works also.
I've updated from version 925 in wich my license code (I had to ask for at the place I bought my device) wasn't accepted. But when I tried to register after this update and filled in my license code everything worked great????????? even my license code was accepted
THNX for all the work you guys do

official?
Drazix said:
It's the official ROM
Click to expand...
Click to collapse
How do you know it is the official?
It seems to differ markedly from my original factory setup (but not necessarily in a bad way...). If we don't know where this came from, is it safe to install from?
btw, it seems to work great

QUESTION:
Some friends reported AFTER FLASH:
MARKET BROKEN
ETHERNET PORT DOESNT WORK
Anyone ?????

9003 blacklight reboots

as the title says my 9003 started rebooting for no reason and no while i have it plugged in on the charger it shows a blacklight every couple of seconds... while it was operational i was on the tweaks menu and pressed something about a autoboot fix and a kernel scheduler... that's why it crashed... i'm on stock xxkpu and although it somehow goes into download mode it doesn't go to recovery menu... in download mode my pc doesn't recognize it so i can format it... any help would be appreciated... thank you in advance

nickargas said:
as the title says my 9003 started rebooting for no reason and no while i have it plugged in on the charger it shows a blacklight every couple of seconds... while it was operational i was on the tweaks menu and pressed something about a autoboot fix and a kernel scheduler... that's why it crashed... i'm on stock xxkpu and although it somehow goes into download mode it doesn't go to recovery menu... in download mode my pc doesn't recognize it so i can format it... any help would be appreciated... thank you in advance
Click to expand...
Click to collapse
plz help me i think i have bricked my phone...

try doing hard reset. If you cant go to recovery mode, open your cover, between the camera and speaker there is tiny hole. Use pointed object to push this while doing download mode combo. You probably need an assistance of a brother or sister lol. Then in recovery mode, Try if your pc can detect your phone again. Then try flashing stock firmware.

that's what i'm trying to do... and something to know there is no button there... that's where the plastic was poured through tiny holes in the mold cavity that made the chassis... if you don't believe me there is another one right beneath the battery...

nickargas said:
that's what i'm trying to do... and something to know there is no button there... that's where the plastic was poured through tiny holes in the mold cavity that made the chassis... if you don't believe me there is another one right beneath the battery...
Click to expand...
Click to collapse
Lol, are you sure you have the standard international version of i9003?
There would be a small pin hole sort of thing between the camera and the speaker after opening the back flap.
You need to goto the download mode by using a pin. Press the pub hole with a sharp object(not too sharp). Then press the volume down key, then home button. Holding these all, then press the power key for about 4 seconds. You'd see the Samsung boot animation. At this point leave the power key, keep holding other buttons until you see the download mode.
Then connect to a PC to see if it's connected in com port
Press thanks if helped
Sent from my GT-i9003 running on RemICS 1.3
CF-root by amit.bagaria
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

it's ok if you don't believe me bro... my screen is shatered and i will make a tutorial these days on how to replace it and i will show you there's not a button there... trust me i've opened my samsung a couple of times in order to clean it...
iAmBalvinder said:
Lol, are you sure you have the standard international version of i9003?
There would be a small pin hole sort of thing between the camera and the speaker after opening the back flap.
You need to goto the download mode by using a pin. Press the pub hole with a sharp object(not too sharp). Then press the volume down key, then home button. Holding these all, then press the power key for about 4 seconds. You'd see the Samsung boot animation. At this point leave the power key, keep holding other buttons until you see the download mode.
Then connect to a PC to see if it's connected in com port
Press thanks if helped
Sent from my GT-i9003 running on RemICS 1.3
CF-root by amit.bagaria
Click to expand...
Click to collapse

nickargas said:
it's ok if you don't believe me bro... my screen is shatered and i will make a tutorial these days on how to replace it and i will show you there's not a button there... trust me i've opened my samsung a couple of times in order to clean it...
Click to expand...
Click to collapse
Dude as u said no button near camera and speaker.. But there is a button near the Sim card slot, just above the battery.. Try to get into recover using that button..
Sent from my fingers to your face using xda premium.!

OnePlus 6 hard bricked. Need help.

I belive my 1+ 6 somehow got bricked. I didn't root it, I didn't unlock the boatloader, I didn't put any custom ROMs, everything was stock. I went to bed like usual, and left the phone charging. Around 1 hour later, I woke up, the screen was on
Your device is corrupt. It can't be trusted and may not work properly. Visit this link on another device: g.co/ABH
PRESS POWER KEY TO CONTINUE.
I was half asleep, I restarted the phone, everything was back to normal and I thought that was the end of it. Woke up late in the morning, confused, because my alarm didn't ring. My phone was dead, wasn't turning on, it wasn't doing anything. It was charged when I restarted it last night (75%). I tried every single combination of buttons, I couldn't get it to boot into Fast Boot, nothing was working.
In the morning, I tried using the Msm tool, but it always got stuck at 'Memory size: 119.19G' after 13 seconds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I gave up, and tried to turn on the phone a few hours later. It turned on, and I got that message again, that your device is corrupt. Pressed the power key, and it started just fine. It restarted afterwards, and was booting to fast boot menu. No matter what I tried, it was always going to the fast boot menu.
I tried the Msm tool, and this time I got past that stage. But, this time around, it got stuck at downloading system.img to system_a (I left it there for 40 minutes), until I closed everything and tried to restart the procedure.
Now I'm back to square 1, phone won't turn on, won't vibrate and will be stuck at Memory size stage.
Please help me out, I'm really desperate...

try other rom in msmdownloadtool, i give you a link to OxygenOS 9.0.2 MSMDownloadTool v.4.058:
https://mega.nz/#!NEEEgCCJ!Wuo2tw3ehnnKhcGQEc5fMXPNZdqJO_IT5suVrCHD1UY
drivers:
https://androidfilehost.com/?fid=24052804347798730

This is what I am getting now

Do you have another usb to type-c cable for try?

Tried 3 more cables, and 2 other USB ports, same results. Will have to try it tomorrow, again, on a different machine, but I am doubtful it's going to make any difference.
Any other ideas? Thank you!

try disabling the sha256 check, perhaps you can flash it with errors but your phone boot, seems an internal damage, i never had issues with msmdownloadtool

try a different version of the program and see if a reboot works. This program saved my phone also 2 weeks ago and i thought i was hard bricked also because my phone showed there was no recovery/fastboot and bootloader and at first the program didn't work like it should and after a reboot of the pc and then starting the app and then do the correct button combination so that the led light on the phone will turn yellow i believe and then start the process.

This sounds like a hardware failure, send the phone to oneplus.

Try to contact OnePlus service, I had a very similar problem to my 5T and they solved it via remote desktop.

Press volume up for 5 seconds then plug the device into your laptop. It should be detected as COM3 and the MSM download tool should detect the device.

dragos281993 said:
Press volume up for 5 seconds then plug the device into your laptop. It should be detected as COM3 and the MSM download tool should detect the device.
Click to expand...
Click to collapse
The device, as mentioned in the initial post, is detected by the MSM tool, however, after I press start, I get hit with an error every time
I have contacted OnePlus, and they said that they no longer do remote fixes, as they used to.

For my past experience, You have to log in EDL mode instead fastboot for flashing through msntool.

DurDom said:
The device, as mentioned in the initial post, is detected by the MSM tool, however, after I press start, I get hit with an error every time
I have contacted OnePlus, and they said that they no longer do remote fixes, as they used to.
Click to expand...
Click to collapse
Sir, did you solve the problem?

Sounds like an actual hardware issue if this happened on a stock device out of the blue. Contact OnePlus and hopefully they can make it right.

SOCOM-HERO said:
Sounds like an actual hardware issue if this happened on a stock device out of the blue. Contact OnePlus and hopefully they can make it right.
Click to expand...
Click to collapse
It was a stock device. Apparently the memory went bad out of nowhere, and the motherboard had to be replaced.

Did they replace MoBo for free? I have the same issue

Did you manage to get your phone working again? My onePlus 6 died on me last week too.
It was updated to 11.1.1 a few weeks ago.
Last week while idly scrolling social media, the phone froze, turned off, and when it turned back on, it displayed Qualcomm crashdump mode.
I've been running the MsmDownloadTool, and for the past 55 minutes it's been stuck in "Downloading system.img to system_a".
Not sure how to proceed from here.

Question Waiting for flashing full ramdump....

I am stuck on this. Tried many of the suggestions on the forum still not getting anywhere.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mikeychsia said:
I am stuck on this. Tried many of the suggestions on the forum still not getting anywhere.
View attachment 5401871
Click to expand...
Click to collapse
Not sure if this helps, In some devices, ramdump mode means that the system can't deal with some determined process, for example an over exposure charging time. You should try to reboot it pressing the three buttons for about 12 seconds, and it should be fine.

SubwayChamp said:
Not sure if this helps, In some devices, ramdump mode means that the system can't deal with some determined process, for example an over exposure charging time. You should try to reboot it pressing the three buttons for about 12 seconds, and it should be fine.
Click to expand...
Click to collapse
Thanks for this tried this and no change still same message.

mikeychsia said:
Thanks for this tried this and no change still same message.
Click to expand...
Click to collapse
This used to happen many years ago, was kinda normal, but it's strange actually with such powered devices, you should find a combination key to power off device (time ago worked pressing the three buttons about 30 seconds) and then restart from there, device has to reboot normally, ramdump state creates a complete log/report that take some time and usually is nothing more than that, something like this https://www.askmefast.com/How_can_i_reset_my_phone_its_on_RAMDUMP_MODEarm9_mode-qna1311373.html if the over exposition didn't lead to a hardware issue with the EMMC itself then it has to be fixable.

SubwayChamp said:
This used to happen many years ago, was kinda normal, but it's strange actually with such powered devices, you should find a combination key to power off device (time ago worked pressing the three buttons about 30 seconds) and then restart from there, device has to reboot normally, ramdump state creates a complete log/report that take some time and usually is nothing more than that, something like this https://www.askmefast.com/How_can_i_reset_my_phone_its_on_RAMDUMP_MODEarm9_mode-qna1311373.html if the over exposition didn't lead to a hardware issue with the EMMC itself then it has to be fixable.
Click to expand...
Click to collapse
I tried all this too no change. I been trying all sorts of combinations for 4 days now each results in the same no change.

Phone won't boot to Android, stuck on ramdump
Hi there, My ZenFone 8 suddenly turned off randomly today, while playing music on YouTube. I held the power button for 15 or so seconds, and now the phone is stuck on what I assume to be a ramdump. It lists various boot stages, and has green...
forum.xda-developers.com

twistedumbrella said:
Phone won't boot to Android, stuck on ramdump
Hi there, My ZenFone 8 suddenly turned off randomly today, while playing music on YouTube. I held the power button for 15 or so seconds, and now the phone is stuck on what I assume to be a ramdump. It lists various boot stages, and has green...
forum.xda-developers.com
Click to expand...
Click to collapse
I tried all this today again still no change same error

mikeychsia said:
I tried all this today again still no change same error
Click to expand...
Click to collapse
Still just want to say thanks for the response. It feels like its a hardware issue and so I will just have to send it back to HK for repair or replacement.

mikeychsia said:
Still just want to say thanks for the response. It feels like its a hardware issue and so I will just have to send it back to HK for repair or replacement.
Click to expand...
Click to collapse
Unfortunately I don't know the exact combination keys for your device but at least I could give you a clue, in the meantime if you want to keep trying a solution till to take it to a repair center, you should visit more threads regarding this specific searching; "How to get out of RAMdump mode Android"

SubwayChamp said:
Unfortunately I don't know the exact combination keys for your device but at least I could give you a clue, in the meantime if you want to keep trying a solution till to take it to a repair center, you should visit more threads regarding this specific searching; "How to get out of RAMdump mode Android"
Click to expand...
Click to collapse
Thanks for the advise I will give it a go

Today it popped up after installing the module in the manager magiskl restarting the phone in romdump But now it works normally

thieftime1980 said:
Today it popped up after installing the module in the manager magiskl restarting the phone in romdump But now it works normally
Click to expand...
Click to collapse
Good for you. I have had no such luck. I sent the phone back to the manufacturer who confirmed that the hardware was indeed faulty so they are going to replace the whole thing.

thieftime1980 said:
Today it popped up after installing the module in the manager magiskl restarting the phone in romdump But now it works normally
Click to expand...
Click to collapse
For the audience, How did you get it out of RAM dump mode? Which button keys did you press or something else?

SubwayChamp said:
For the audience, How did you get it out of RAM dump mode? Which button keys did you press or something else?
Click to expand...
Click to collapse
Hold all three physical buttons until it reboots

just hold the power button for about 20 seconds

Question Triying to revive a black screen SM-R890

Hi, this is the first time i post, I'm a newby and just want to start experimenting with these devices.
I have a Samsung Galaxy watch 4 classic (SM-R890) with a faulty back button, so i bougth a dead watch on ebay to change the buttons and now I want to see if i'm able to bring life back to the ebay bircked watch.
The screenof the bricked device wotks fine (Just tested the screen on my good watch) and also the battery hold charge.
Pressing the two butons while charging doesn't work, (it was the first thing I tried as soon as I get the watch from ebay)
after reading some post here, I tried to connect to the this pins on the bottom of the main board in order to stablish a usb connection
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the soldering is not pretty but it works. (also the photo was taked before cleaning the board)
pin order is as follow
5v | Not conected | green | white | gnd
also there is no bridge between the pads, I just tested that with a multimeter.
after installing the samsung usb driver and connected the cable, I saw for and instant the message saying "installing exynos driver" or some messages like that, but after that nothing.....
Now it sound like when you plug a usb device and after a few seconds it sounds like when you discconet the device. but it doesn´t show on device managen neither in odin software.
to "force the connection" on windows I have to press the ON button on the watch and it sound like connecting an usb device again.
i've also tested on linux with "./odin4 -l" command but also no luck.
I just want to know if i'm missing some crucial step in order to connect the watch to the pc via usb.
Hope you can help me bringing back life to this watch.
Thanks in advance.

installing exynos driver
Click to expand...
Click to collapse
This sounds for me like dead Bootloader sboot.bin is "erased"...
So your Adventure is in this Direction...
Creating correct cfg
Howdy. a man with a good heart God help you I locked my samsung note 10 plus phone I used a wrong cfg taken from a website and I need a person who knows how to create a correct cfg I have sboot.bin extracted from firmware correctly but I don't...
forum.xda-developers.com
I have no better thread/link for now...
But I hope it is little bit clear now.
I can try to help you....
But limited time...
Best Regards

Thanks, but the problem is that i can't stablish comunication between the watch and the pc. is there something I can do?
Here's a video showing what happend when i connect the usb cable to the pc on winldows. on linux is the same thing, can't see the device using lsusb command.
when I connect the usb cable I can hear the connecting sound on windows, but after a few seconds it sounds like it disconnects, then I press the red button on the watch and it sounds like connecting again but not for long, I repeat this process a few times and that's why those sounds repeats in the video.

Please look at this post:
Firmware and Combination Firmware and FOTA Delta and CSC change and...
Looks like it could be harder since Tizen... A Stock Firmware for netOdin/Odin not available yet... B Combination Firmware not available yet C FOTA Delta File for study I have...
forum.xda-developers.com
Try to check if same info:
Code:
VID_04E8&PID_1100&MI_00
The bad... it is possible you need special Key Combination... timing...
But we have only 2 Hardware Keys...
AND/or you need Tweezers to establish stable Connection...
Because many things ae secured...
Or only special Hardware allow stable Connection... maybe special Resistors required... like this Hardware can offer:
Firmware and Combination Firmware and FOTA Delta and CSC change and...
Looks like it could be harder since Tizen... A Stock Firmware for netOdin/Odin not available yet... B Combination Firmware not available yet C FOTA Delta File for study I have...
forum.xda-developers.com
Out this point... you at your own....
Maybe you find by luck what to do... as proper instruction not leaked...
I will try to find example for Tweezers... I can remember dead boot repair on GT-I9300 for instance required Tweezers...
Best Regards

For Tweezer example i have nothing better found as this old GT-I9300...
[Galaxy S III][IMPORTANT] GT-I9300 Hard Brick Fix
- I have not done this before and have not tested this method, do this at your own risk!!! We've made it to the XDA Portal! (link below) http://www.xda-developers.com/android/fix-your-soft-bricked-galaxy-s-iii-samsungs-way/ Hi, A few months...
forum.xda-developers.com
Only as example that it is possible GW4 is secured AGAINST easy boot recovery...
And you need additional knowledge about correct procedure...
Best Regards