Related
I updated the CWM to 6.x and tried to install KitKat 4.4.4 on my P500 and now, it stuck at bootloaded. Tried different ROMs but still stuck at bootloader.
I am able to open CWM recovery, install zip even can mount USB or /system and run adb shell. Able to connect it in emergency mode (PC detects it), but KDZ does not recognize the phone.
I tried the LG support tool, that told me that the software is already up-to-date. When I try to update recovery, it stuck at 11% and says there is some issue in PC communication.
Can this be an issue of baseband? I am not sure what to try next.
***Have removed the sd-card also to see if that helps.
*** also tried on different machines with xp, win 7, win 8.
Can anyone help?
shubhz1987 said:
I updated the CWM to 6.x and tried to install KitKat 4.4.4 on my P500 and now, it stuck at bootloaded. Tried different ROMs but still stuck at bootloader.
I am able to open CWM recovery, install zip even can mount USB or /system and run adb shell. Able to connect it in emergency mode (PC detects it), but KDZ does not recognize the phone.
I tried the LG support tool, that told me that the software is already up-to-date. When I try to update recovery, it stuck at 11% and says there is some issue in PC communication.
Can this be an issue of baseband? I am not sure what to try next.
***Have removed the sd-card also to see if that helps.
*** also tried on different machines with xp, win 7, win 8.
Can anyone help?
Click to expand...
Click to collapse
If you can boot to recovery then do the following:
1) Wipe dalvik-cache
2) Wipe cache
3) Format /system
4) Format /userdata or /data
5) Reinstall ROM
6) Reinstall GApps
7) Reboot
When upgrading or changing between major versions, ie; JellyBean to KitKat, it's highly recommended to format your system and userdata partitions.
Done This
shinobisoft said:
If you can boot to recovery then do the following:
1) Wipe dalvik-cache
2) Wipe cache
3) Format /system
4) Format /userdata or /data
5) Reinstall ROM
6) Reinstall GApps
7) Reboot
When upgrading or changing between major versions, ie; JellyBean to KitKat, it's highly recommended to format your system and userdata partitions.
Click to expand...
Click to collapse
Thanks shinobisoft, but I have done these in the same order.
help
shubhz1987 said:
Thanks shinobisoft, but I have done these in the same order.
Click to expand...
Click to collapse
Hello Guys...
Any help....
shubhz1987 said:
Hello Guys...
Any help....
Click to expand...
Click to collapse
you didn't say wich rom/thread etc, however
could you try this:
take this cwm the january's
take this rom the 7.1 version.
enter in recovery mode
flash the above cwm
flash the rom :fingers-crossed:
after that if you want to flash a kitkat, if it's an OS2SD or not use twrp 2.7.0.1 multi (bigsupersquid's & HardLight's twrp for p500)
this version have tls enabled
Now stuck at LG boot logo infinite loop
xdema said:
you didn't say wich rom/thread etc, however
could you try this:
take this cwm the january's
take this rom the 7.1 version.
enter in recovery mode
flash the above cwm
flash the rom :fingers-crossed:
after that if you want to flash a kitkat, if it's an OS2SD or not use twrp 2.7.0.1 multi (bigsupersquid's & HardLight's twrp for p500)
this version have tls enabled
Click to expand...
Click to collapse
I flashed both of these zips and now I am stuck at LG boot logo infinite loop. CWM is updated by the above zip.
shubhz1987 said:
I flashed both of these zips and now I am stuck at LG boot logo infinite loop. CWM is updated by the above zip.
Click to expand...
Click to collapse
Did you make the format /system /androidsecure /data etc..?
change the SD card, re-download the rom 7.1 & the twrp 2.7.0 multi, and retry (corrupted data/download problem?)
else go back to older cwm v5 and try older ics based rom.
i don't want to suggest to you to use LGMDP or KDZ because with that you can really break the phone. take that as last chances
i've a p500 for test, i've seen a lot of "black after LG logo", but everytime when i had possibility to enter the recovery, a new flash (recovery, rom or both) solved problems
To wipe clean 100% and install a new rom
Select “wipe data/factory reset
Select “yes”
Go to “mounts and storage”
Select “format /boot”
Select “yes”
Select “format /system”
Select “yes”
Back out of that menu to the main one again and select “advanced”
Select “Wipe Dalvik Cache”
Select “yes”
xdema said:
Did you make the format /system /androidsecure /data etc..?
change the SD card, re-download the rom 7.1 & the twrp 2.7.0 multi, and retry (corrupted data/download problem?)
else go back to older cwm v5 and try older ics based rom.
i don't want to suggest to you to use LGMDP or KDZ because with that you can really break the phone. take that as last chances
i've a p500 for test, i've seen a lot of "black after LG logo", but everytime when i had possibility to enter the recovery, a new flash (recovery, rom or both) solved problems
To wipe clean 100% and install a new rom
Select “wipe data/factory reset
Select “yes”
Go to “mounts and storage”
Select “format /boot”
Select “yes”
Select “format /system”
Select “yes”
Back out of that menu to the main one again and select “advanced”
Select “Wipe Dalvik Cache”
Select “yes”
Click to expand...
Click to collapse
It's also good to check the Md5 sums of the recovery and rom.zip, if Md5 sums don't match, you will have a corrupt download.
-boot
-system image
-vendor image
which one do i pick
edit: the instructions for the rom state
03. Flash ROM.zip + TWRP_installer/boot.img ramdisk method
is ramdisk method one of these three?
A/B devices doesn't have a recovery partition, so you need to boot twrp img first and then install a recovery installer.
- in CMD you need to type fastboot boot [filename].img
I have the same question.
When trying to flash Magisk-v25.1.zip in "Install image", I get a dialogue "Select partition to flash image:"
- system image
- ventor image
- recovery
- boot
- modem
I tried "boot" but after flashing it gave me an error after restart: "the sistem has been destroyed" - I solved this with flashing CarbonROM in TWRT. My heart almost stopped
Until now, TWRP never gave me this dualogue to select partition. Until now, after every CarbonROM update Magisk has been deleted, so I always downloaded Magisk-vX.apk from github, renamed it to .zip and flashed it via TWRP. Simple. But no it shows "Select partition to flash image:" and I do not know what to select.
Please help
*I have also tried to install Magisk via Magisk android app, but when I "select and patch a file boot.img", the insllation is successfull, but Magisk app still shows MAGISK INSTALLED N/A.
i have same problem, someone ?
xdaslo said:
I have the same question.
When trying to flash Magisk-v25.1.zip in "Install image", I get a dialogue "Select partition to flash image:"
- system image
- ventor image
- recovery
- boot
- modem
I tried "boot" but after flashing it gave me an error after restart: "the sistem has been destroyed" - I solved this with flashing CarbonROM in TWRT. My heart almost stopped
Until now, TWRP never gave me this dualogue to select partition. Until now, after every CarbonROM update Magisk has been deleted, so I always downloaded Magisk-vX.apk from github, renamed it to .zip and flashed it via TWRP. Simple. But no it shows "Select partition to flash image:" and I do not know what to select.
Please help
*I have also tried to install Magisk via Magisk android app, but when I "select and patch a file boot.img", the insllation is successfull, but Magisk app still shows MAGISK INSTALLED N/A.
Click to expand...
Click to collapse
Hello! You should change the file extension to .zip and install it as a .zip, The same thing happened to me but with a rom (PixelExperience) on my samsung galaxy s9
l0lc9re said:
Hello! You should change the file extension to .zip and install it as a .zip, The same thing happened to me but with a rom (PixelExperience) on my samsung galaxy s9
Click to expand...
Click to collapse
If I change it shows that the file zip is corrupted
I would like to install TWRP and after that Lineage OS on my Samsung S8+ (Exynos). So i tried flashing TWRP with Odin (Dream2lte version 3.3.1.0). But i ran into a FRP lock so i googled and try to solve this, but so far i am unable to.
I have the password to my Google account, so i removed the Google account from the phone and removed the phone from my Google account. After factory reset i am still getting an error FRP lock when flashing.
Shouldn't the FRP lock be gone after removing google account and doing a factory reset? I have tried a couple of YT Howto's but they don't seem to work.
How do i remove the FRP lock so that i am able to install TWRP and Lineage OS?
Like i said i know the password to my Google account and i 100% own the phone
(Bypass probably isn't the correct word, i am simply trying to turn it off )
Got exactly the same problem, hence like you, ended up here for help.
Well i fixed my problem (Disable USB debug and OEM unlock, couple of reboots and enabled them and it worked). But after that i broke my phone
I am stuck at the screen saying: An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.
I know this is meant to scare me (is kinda working...), but i also know that Odin is still working. So as far as i know i have to flash the original firmware now to fix this. But i keep getting the error: Invalid magic string. When i try to also flash a BL file i get the error: ""Secure CHECK FAIL: (BOOTLOADER)" The option Re-Partition in Odin is switched OFF, as far as i know this is okee... right?
I have tried 3 different versions (Android 9/8/7):
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXU1AQC9/128974/
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXU4DSBA/259612/
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXS4CSA4/256485/
This zip files contain a BL/AP/CP/CSC file, i have tried them all at the same time in Odin as well as the AP and BL files seperate. (from one zip file, NOT different version files together of course)
I tried using Smart Switch 4.1 to do the emergency procedure using model nummer SM-G955F with my serial number but before it does anything it tells me this is not possible with an SM-G955F.
They all give me the same result.
Does anybody know how to fix this?
TheGeneral said:
Well i fixed my problem (Disable USB debug and OEM unlock, couple of reboots and enabled them and it worked). But after that i broke my phone
I am stuck at the screen saying: An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.
I know this is meant to scare me (is kinda working...), but i also know that Odin is still working. So as far as i know i have to flash the original firmware now to fix this. But i keep getting the error: Invalid magic string. When i try to also flash a BL file i get the error: ""Secure CHECK FAIL: (BOOTLOADER)" The option Re-Partition in Odin is switched OFF, as far as i know this is okee... right?
I have tried 3 different versions (Android 9/8/7):
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXU1AQC9/128974/
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXU4DSBA/259612/
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXS4CSA4/256485/
This zip files contain a BL/AP/CP/CSC file, i have tried them all at the same time in Odin as well as the AP and BL files seperate. (from one zip file, NOT different version files together of course)
I tried using Smart Switch 4.1 to do the emergency procedure using model nummer SM-G955F with my serial number but before it does anything it tells me this is not possible with an SM-G955F.
They all give me the same result.
Does anybody know how to fix this?
Click to expand...
Click to collapse
Secure check fail on bootloader is your flashing a older firmware than on the device. Look at the builds 5th from last digit. You need to flash that equal or greater than.
The error screen you see for emergency recovery is ok. It's like a modified version of download mode. Kind of. You can still flash Odin files from said screen. Ii see you've flashed a bit 1. And two bit 4 firmwares. So you must be on a 5 or greater. I don't know the exy bit number but like snapdragon is at or near 7 or 8. I can explain better if you need. But not an exynos expert
TheMadScientist said:
Secure check fail on bootloader is your flashing a older firmware than on the device. Look at the builds 5th from last digit. You need to flash that equal or greater than.
The error screen you see for emergency recovery is ok. It's like a modified version of download mode. Kind of. You can still flash Odin files from said screen. Ii see you've flashed a bit 1. And two bit 4 firmwares. So you must be on a 5 or greater. I don't know the exy bit number but like snapdragon is at or near 7 or 8. I can explain better if you need. But not an exynos expert
Click to expand...
Click to collapse
Thanks for your reply! I am in the normal "Downloading...." screen is there anywhere i can check which number i am at?
But i have just tried this one: G950FXXS7DTA6_G950FOXM7DTA6_PHN and it is not working. But this is the newest one available on sammobile. Still the same bootloader error.
I have tried TWRP 3.3.1.0 and that worked, now i am in the TWRP menu but i don't have the LineageOS 17 + GoApps copied to the root. So i cannot install LineageOS now. What do i do now? My computer sees a SM-G955F but it is not showing any storage, if i can fix this i could copy the LineageOS files to the root...right?
TheGeneral said:
Thanks for your reply! I am in the normal "Downloading...." screen is there anywhere i can check which number i am at?
But i have just tried this one: G950FXXS7DTA6_G950FOXM7DTA6_PHN and it is not working. But this is the newest one available on sammobile. Still the same bootloader error.
I have tried TWRP 3.3.1.0 and that worked, now i am in the TWRP menu but i don't have the LineageOS 17 + GoApps copied to the root. So i cannot install LineageOS now. What do i do now? My computer sees a SM-G955F but it is not showing any storage, if i can fix this i could copy the LineageOS files to the root...right?
Click to expand...
Click to collapse
1. If you are on an S8+ flashing firmware for the S8 will cause you issues. Download firmware for the S8+ only. ie: 955f not 950f.
2. If you can't get into the system but can get into download mode there should be a line saying
AP SWREV: B:? K:? S:?
The B:? Is your bootloader version number. You will need to flash the same or higher.
3. How did you install TWRP?
If you don't have an SD card to store files on then after the Format Data stage you can then copy files from pc to phones internal storage.
spawnlives said:
1. If you are on an S8+ flashing firmware for the S8 will cause you issues. Download firmware for the S8+ only. ie: 955f not 950f.
2. If you can't get into the system but can get into download mode there should be a line saying
AP SWREV: B:? K:? S:?
The B:? Is your bootloader version number. You will need to flash the same or higher.
3. How did you install TWTP?
If you don't have an SD card to store files on then after the Format Data stage you can then copy files from pc to phones internal storage.
Click to expand...
Click to collapse
I am a bit embarrassed, it looks like i have been trying to flash the wrong ROMs last night 950 instead of 955, i am downloading the correct files now and wil try again. Sorry for this dumb mistake!
Just to be sure, i am trying to do this:
https://www.getdroidtips.com/lineage-os-17-samsung-galaxy-s8/
(I do know that this site says S8, but i picked the right files this time and thought the process would be the same)
But i first Flash TWRP with Odin, otherwise i cannot reach the TWRP recovery menu right?
But when i look bullet 5 (not number 5) it looks like i need to flash TWRP from within the TWRP menu. But that is not correct right?
I have placed these zip files on the phone:
lineage-17.1-20200211-UNOFFICIAL-dreamlte.zip
open_gapps-arm64-10.0-pico-20200303.zip
As a zip and unpacked, but when i am in the TWRP menu and i go to install, i cannot find the zip files. I placed them in the highest folder level possible. Why can't i find them now?
TheGeneral said:
I am a bit embarrassed, it looks like i have been trying to flash the wrong ROMs last night 950 instead of 955, i am downloading the correct files now and wil try again. Sorry for this dumb mistake!
Just to be sure, i am trying to do this:
https://www.getdroidtips.com/lineage-os-17-samsung-galaxy-s8/
(I do know that this site says S8, but i picked the right files this time and thought the process would be the same)
But i first Flash TWRP with Odin, otherwise i cannot reach the TWRP recovery menu right?
But when i look bullet 5 (not number 5) it looks like i need to flash TWRP from within the TWRP menu. But that is not correct right?
I have placed these zip files on the phone:
lineage-17.1-20200211-UNOFFICIAL-dreamlte.zip
open_gapps-arm64-10.0-pico-20200303.zip
As a zip and unpacked, but when i am in the TWRP menu and i go to install, i cannot find the zip files. I placed them in the highest folder level possible. Why can't i find them now?
Click to expand...
Click to collapse
I don't use custom roms yet.
Try searching for you device S8+ for installation instructions. Had a quick look the firmware is for S8 only not S8+. Need dream2lit for S8+
Try in separate stages instead of all at once.
I would sort out your stock firmware first get it up and running.
Then install TWRP. Install for S8+ from
http://twrp.me/Devices/Samsung/
They are many guides for this
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
If you need rmm bypass zip
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
Get that up and running properly.
Then you can install custom roms,root etc.
In regards to transferring files to phone they need to be a zip file ( .zip ) or an image ( .img ) files to flash in TWRP.
Maybe select internal storage then from menu select sdcard folder check if file is there.
spawnlives said:
I don't use custom roms yet.
Try searching for you device S8+ for installation instructions. Had a quick look the firmware is for S8 only not S8+. Need dream2lit for S8+
Try in separate stages instead of all at once.
I would sort out your stock firmware first get it up and running.
Then install TWRP. Install for S8+ from
http://twrp.me/Devices/Samsung/
They are many guides for this
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
If you need rmm bypass zip
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
Get that up and running properly.
Then you can install custom roms,root etc.
In regards to transferring files to phone they need to be a zip file ( .zip ) or an image ( .img ) files to flash in TWRP.
Maybe select internal storage then from menu select sdcard folder check if file is there.
Click to expand...
Click to collapse
I am using dream2lit.
I have the correct factory stock ROM (now), so i can always go back now. But i agree, my preparation wasn't good enough.
I will look at the links, but for now like i said my problem is that i cannot see my files in TWRP. But maybe that will be addressed in one of your links
With regards to your first link, i used the "Odin Method" so as far as i can tell i did this the right way(https://twrp.me/samsung/samsunggalaxys8plus.html):
Odin Install Method (No Root Required):
You will need to download and install Odin on your PC. Once you have Odin installed, download the proper .tar file for your device from the download link above. Power off your device. Turn on your device using the proper key combo to get into download mode and attach the device to your computer via a USB cable. Use the PDA tab or button to browse to and select the tar file that you downloaded and flash the device.
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
TheGeneral said:
I am using dream2lit.
I have the correct factory stock ROM (now), so i can always go back now. But i agree, my preparation wasn't good enough.
I will look at the links, but for now like i said my problem is that i cannot see my files in TWRP. But maybe that will be addressed in one of your links
With regards to your first link, i used the "Odin Method" so as far as i can tell i did this the right way(https://twrp.me/samsung/samsunggalaxys8plus.html):
Odin Install Method (No Root Required):
You will need to download and install Odin on your PC. Once you have Odin installed, download the proper .tar file for your device from the download link above. Power off your device. Turn on your device using the proper key combo to get into download mode and attach the device to your computer via a USB cable. Use the PDA tab or button to browse to and select the tar file that you downloaded and flash the device.
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
Note: Samsung don't have fastboot commands. Have to use button configurations to enter recovery or download modes.
What stage are you at?
It will give me a better idea to be able to help more.
spawnlives said:
Note: Samsung don't have fastboot commands. Have to use button configurations to enter recovery or download modes.
What stage are you at?
It will give me a better idea to be able to help more.
Click to expand...
Click to collapse
Well i installed Lineage OS 17.1 and Open Apps (lineage-17.1-20200211-UNOFFICIAL-dream2lte and open_gapps-arm64-10.0-pico-20200303) with an OTG plug and an USB stick. After installing i removed the USB Stick. But now i am having a new problem...
When the phone boots it asks: "To start Android, enter your password"
Which password is this? When i enter a password i often use it works but then:
"Decryption unsuccessful
The password you entered is correct, but unfortunately your data is corrupt. (Which is no problem)
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google account.
(Button) Erase ALL DATA"
Of course i erase the data. Look at the attachment to see what happens then.
I will not give up, will get Lineage OS on this phone, and after that on my Tablet S2 and maybe even on my primairy phone (S10+)
What should i do now? Many thanks for all the help so far, and for help finishing this proces
TheGeneral said:
Well i installed Lineage OS 17.1 and Open Apps (lineage-17.1-20200211-UNOFFICIAL-dream2lte and open_gapps-arm64-10.0-pico-20200303) with an OTG plug and an USB stick. After installing i removed the USB Stick. But now i am having a new problem...
When the phone boots it asks: "To start Android, enter your password"
Which password is this? When i enter a password i often use it works but then:
"Decryption unsuccessful
The password you entered is correct, but unfortunately your data is corrupt. (Which is no problem)
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google account.
(Button) Erase ALL DATA"
Of course i erase the data. Look at the attachment to see what happens then.
I will not give up, will get Lineage OS on this phone, and after that on my Tablet S2 and maybe even on my primairy phone (S10+)
What should i do now? Many thanks for all the help so far, and for help finishing this proces
Click to expand...
Click to collapse
Mounting data errors in twrp generally ( but not always ) means your device is encrypted/re-encrypted when booting into system. Twrp has issues with encrypted devices.
What version twrp are you using?
Have you flashed the no-verity-opt-encypt zip in twrp. This zip file will prevent device from re-encrypting when booting phone back into the system ( after the Format Data stage / reboot back into twrp)
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
What is your process of installing twrp?
If you have any passwords etc. installed delete them until after setting up you phone.
spawnlives said:
Mounting data errors in twrp generally ( but not always ) means your device is encrypted/re-encrypted when booting into system. Twrp has issues with encrypted devices.
What version twrp are you using?
Have you flashed the no-verity-opt-encypt zip in twrp. This zip file will prevent device from re-encrypting when booting phone back into the system ( after the Format Data stage / reboot back into twrp)
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
What is your process of installing twrp?
If you have any passwords etc. installed delete them until after setting up you phone.
Click to expand...
Click to collapse
I am using version twrp-3.3.1-1-dream2lte and no i have not flashed that no-verity-opt-encypt zip. I assume i should flash this one the same way flash the Lineage ROM right?
No passwords used on the phone.
My process:
i put the phone in download mode (POWER+BIXBY+VOL DOWN)
I use ODIN to flash twrp-3.3.1-1-dream2lte, and when the phone reboot i press POWER+BIXBY+VOL UP to enter TWRP menu,
Then i go to WIPE and Advanced Wipe and i select the data, system and davlik cache. Then swipe to wipe it.
Then i go to INSTALL and flash lineage-17.1-20200211-UNOFFICIAL-dream2lte and open_gapps-arm64-10.0-pico-20200303
TheGeneral said:
I am using version twrp-3.3.1-1-dream2lte and no i have not flashed that no-verity-opt-encypt zip. I assume i should flash this one the same way flash the Lineage ROM right?
No passwords used on the phone.
My process:
i put the phone in download mode (POWER+BIXBY+VOL DOWN)
I use ODIN to flash twrp-3.3.1-1-dream2lte, and when the phone reboot i press POWER+BIXBY+VOL UP to enter TWRP menu,
Then i go to WIPE and Advanced Wipe and i select the data, system and davlik cache. Then swipe to wipe it.
Then i go to INSTALL and flash lineage-17.1-20200211-UNOFFICIAL-dream2lte and open_gapps-arm64-10.0-pico-20200303
Click to expand...
Click to collapse
To install TWRP
1. Flash twrp with odin - reboot straight into twrp
2. In wipe menu select Format Data ( bottom right )
Type yes to format
3. Reboot back into twrp ( use twrp menu )
4. Flash no-verity-opt zip and if needed rmm bypass zip ( using install button in twrp ).
5. Reboot back into twrp then reboot to system using twrp menu.
6. From system reboot back into twrp.
To check if device is un-encrypted use backup menu - check data storage size ( If reading 0mb then device is still encrypted ).
Note: If all ok I would do a complete twrp backup at this stage ( keep backup on a separate storage device ).
Then you can install custom Rom's as per the installation guide of that Rom.
spawnlives said:
To install TWRP
1. Flash twrp with odin - reboot straight into twrp
2. In wipe menu select Format Data ( bottom right )
Type yes to format
3. Reboot back into twrp ( use twrp menu )
4. Flash no-verity-opt zip and if needed rmm bypass zip ( using install button in twrp ).
5. Reboot back into twrp then reboot to system using twrp menu.
6. From system reboot back into twrp.
To check if device is un-encrypted use backup menu - check data storage size ( If reading 0mb then device is still encrypted ).
Note: If all ok I would do a complete twrp backup at this stage ( keep backup on a separate storage device ).
Then you can install custom Rom's as per the installation guide of that Rom.
Click to expand...
Click to collapse
how do i make a complete TWRP backup? and what is rmm bypass and how do i know if it is neccessary to install this zip file?
TheGeneral said:
how do i make a complete TWRP backup? and what is rmm bypass and how do i know if it is neccessary to install this zip file?
Click to expand...
Click to collapse
In twrp main menu
Select backup menu - select ( all ) partitions - select storage location ( bottom left of screen ) - then swipe to backup.
Note:
1. If backing up to internal storage copy/move backup to an external storage ie: PC, sd card.etc.
2. Since you want a custom rom backup of the EFS partition is important.
Rmm state can be found in download mode. It will have a line ( near the top ) saying RMM state. It will either say prenormal or normal /disappeared.
It won't hurt to flash it just in case.
See OP in the thread I sent before:
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
spawnlives said:
To install TWRP
1. Flash twrp with odin - reboot straight into twrp
2. In wipe menu select Format Data ( bottom right )
Type yes to format
3. Reboot back into twrp ( use twrp menu )
4. Flash no-verity-opt zip and if needed rmm bypass zip ( using install button in twrp ).
5. Reboot back into twrp then reboot to system using twrp menu.
6. From system reboot back into twrp.
To check if device is un-encrypted use backup menu - check data storage size ( If reading 0mb then device is still encrypted ).
Note: If all ok I would do a complete twrp backup at this stage ( keep backup on a separate storage device ).
Then you can install custom Rom's as per the installation guide of that Rom.
Click to expand...
Click to collapse
I am really trying to do what you are saying...but when i try to "Format Data" (Step 2) it shows an error "Failed to mount '/preload' (Invalid argument). When i try to install no-verity-opt zip (step 4) at the end it shows the same error "Failed to mount '/preload' (Invalid argument). Which is probably because format data failed?
I am installing the zip from an USB stick with an USB-C to USB-A Converter. I don't think that could be the problem?
As Expected the "Data (excl. storage) is still showing 0MB.
TheGeneral said:
I am really trying to do what you are saying...but when i try to "Format Data" (Step 2) it shows an error "Failed to mount '/preload' (Invalid argument). When i try to install no-verity-opt zip (step 4) at the end it shows the same error "Failed to mount '/preload' (Invalid argument). Which is probably because format data failed?
I am installing the zip from an USB stick with an USB-C to USB-A Converter. I don't think that could be the problem?
As Expected the "Data (excl. storage) is still showing 0MB.
Click to expand...
Click to collapse
Failed to mount preload seems to affect some users.
You could try after the format data and reboot back into twrp ( using twrp 3.3.1.1 ):
Select wipe menu
Select advanced wipe
Select Preload
Swipe to wipe
Reboot back into twrp
Then try flashing no-verity/rmm zips files - reboot back into twrp.
Normally, for me , after this stage If i still get 0mb I will reboot into the Android system and then back into twrp. Then check in backup menu storage. If ok then try to flash custom rom.
spawnlives said:
Failed to mount preload seems to affect some users.
You could try after the format data and reboot back into twrp ( using twrp 3.3.1.1 ):
Select wipe menu
Select advanced wipe
Select Preload
Swipe to wipe
Reboot back into twrp
Then try flashing no-verity/rmm zips files - reboot back into twrp.
Normally, for me , after this stage If i still get 0mb I will reboot into the Android system and then back into twrp. Then check in backup menu storage. If ok then try to flash custom rom.
Click to expand...
Click to collapse
Yes Yes!! After doing the Preload i am able to flash no-verity/rmm zips file.
But Data is still showing 0MB.....
I thought why not give the lineage OS rom flashing another try. That worked, but now the phone seems to hang on a Lineage OS logo with a small circle moving around not straight line.
So i wiped everything again and flashed no-verity/rmm zip file, and will wait what for some advice and what do to next.
TheGeneral said:
Yes Yes!! After doing the Preload i am able to flash no-verity/rmm zips file.
But Data is still showing 0MB.....
I thought why not give the lineage OS rom flashing another try. That worked, but now the phone seems to hang on a Lineage OS logo with a small circle moving around not straight line.
So i wiped everything again and flashed no-verity/rmm zip file, and will wait what for some advice and what do to next.
Click to expand...
Click to collapse
Have you tried to reboot into system through twrp ie: reboot menu - system. Let it start normally, reboot into twrp, then check storage size. ( This is after the flashing of the no-verity/rmm zip and rebooting back into twrp ).
As I said I' m not familiar with custom ROMs. I do know that some custom ROMs do take some time to boot up on installation.
But out of curiosity I have a spare S8 and will give it a go.
My new Xiaomi Poco X3 Pro is showing an error screen after some time, like in this post:
https://forum.xda-developers.com/t/cant-load-android-system-lineageos.4314035/
It reads "Can't load Android system. Your data may be corrupt. If you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device"
This happened so far:
I just unlocked the boot loader of my new phone after week of waiting.
I followed the official lineage instructions to install the OS: https://wiki.lineageos.org/devices/vayu/install
Everything worked including the sideloading via db.
I downloaded those two files for the LineageOS-Site:
- Recovery via fastboot: lineage-18.1-20211203-recovery-vayu.img (recovery works, I can still boot into recovery)
- System via adb: lineage-18.1-20211203-nightly-vayu-signed.zip
I also added Gapps via adb: "open_gapps-arm64-11.0-nano-20211204.zip"
Both adb transfers exited successfully.
After the first error screen
- I tapped Try again,
- When the error occurred again, I tapped "Factory data reset," but the error still occurred. The phone is new, no user data is on the phone.
- I booted into recovery and reset all the data I could. When I tap "Format system partition" it throws an error "E: Failed to open /dev/block/dm-0: No such file or directory. System wipe failed."
- Then I repeated the adb sideload. The error occurs again.
- I removed the SIM card, as someone in the forum suggested this could be a problem source. The error still occurs.
What can I do now?
----
Update [2021-12-05 Sun 20:09]
It seems to be a Problem with the GApps Version.
What I did Try so far is:
- Install 03-12-LOS and latest GApps via LOS recovery (didn't work)
- Install 03-12-LOS and latest GApps via TWRP recovery (didn't work)
- install LOS Build from 26-11-2021 without GApps (works)
- Install LOS Build from 26-11-2021 with latest GApps (didn't work)
- Install LOS Build form 26-11-2021 with GApps from 25-11-2021 (works)
Just use TWRP, flash ROM and AFTER flashing ROM Format Data where you have to type "yes". (Format, not Wipe)
Xiaomi Poco X3 Pro
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
Thanks for the Idea. At the moment it has not solved the problem.
This is what I did:
- Flash TWRP
Code:
fastboot flash recovery TWRP-3.5.2-vayu-Nebrassy-2.img
- copy lineage-18.1-20211203-nightly-vayu-signed.zip and "open_gapps-arm64-11.0-nano-20211204.zip" to the Poco device
- install via "install" option, wipe cache at the end of installation
- Format files (via "Wipe" -> "Format Data" -> type "yes")
- Reboot
After some time of the animated Lineage OS logo, the phone reboots into TWRP.
To me this seems very similar to the Lineage recovery before.
Any ideas what could be wrong?
You probably wiped System or Vendor partition or something, you are not supposed to do that.
Most likely you have to reflash MIUI now first. Make sure it's atleast version 12.5.X.X.
Flashing instructions are really simple, this apply to all ROM's.
FIRST INSTALL?:
Remove any fingerprint, PIN, or password in MIUI
Unlock the bootloader
Transfer ROM to internal storage
Install any suitable recovery
Flash ROM zip file
Do a data wipe in recovery (format data)
Reboot to the system, wait and enjoy
FLASHING UPDATES?:
Download via OTA Updater and let it automatically install; OR
Download an update, transfer to internal/external storage (always check file sha256)
Flash ROM zip and reboot.
Do not wipe anything else or add any additional steps. (maybe except Gapps if ROM doesn't have them included)
ps.
In first post there is no mention if you did Format Data or not and when you did it. Like i said before - you have to Formata DATA AFTER flashing ROM . Not before.
This happened so far:
I just unlocked the boot loader of my new phone after week of waiting.
I followed the official lineage instructions to install the OS: https://wiki.lineageos.org/devices/vayu/install
Everything worked including the sideloading via db.
I downloaded those two files for the LineageOS-Site:
- Recovery via fastboot: lineage-18.1-20211203-recovery-vayu.img (recovery works, I can still boot into recovery)
- System via adb: lineage-18.1-20211203-nightly-vayu-signed.zip
I also added Gapps via adb: "open_gapps-arm64-11.0-nano-20211204.zip"
Both adb transfers exited successfully.
Click to expand...
Click to collapse
k3lcior said:
In first post there is no mention if you did Format Data or not and when you did it. Like i said before - you have to Formata DATA AFTER flashing ROM . Not before.
Click to expand...
Click to collapse
I followed the LOS Install Guide: https://wiki.lineageos.org/devices/vayu/install But this procedure does not seem to bee the cause (see below).
Download the LineageOS installation package that you would like to install or build the package yourself.
Optionally, download an application package add-on such as Google Apps (use the arm64 architecture).
If you are not in recovery, reboot into recovery:
With the device powered off, hold Volume Up + Power. When Xiaomi/POCO/Redmi splash appears, release Power and keep pressed Volume Up until recovery appears.
Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition (if you have one).
Return to the main menu.
Sideload the LineageOS .zip package:
On the device, select “Apply Update”, then “Apply from ADB” to begin sideload.
On the host machine, sideload the package using: adb sideload filename.zip.
Click to expand...
Click to collapse
Okay so this is what I did (the part that works):
- I downloaded the latest possible stock ROM from https://www.xda-developers.com/down...ut-several-xiaomi-redmi-mi-poco-devices/#vayu The fastboot ROM is more than 5GB.
- Extract the file "vayu_eea_global_images_V12.5.3.0.RJUEUXM_20211015.0000.00_11.0_eea_05cc38de43.tgz"
- then connect the phone via USB cable in fastboot mode and:
Bash:
cd ~/Downloads/vayu_eea_global_images_V12.5.3.0.RJUEUXM_20211015.0000.00_11.0_eea
/bin/bash ./flash_all.sh
- The default MIUI starts flawless, as it dit the first time I turned on the phone. So far so good.
What didn't work:
1. I installed the LOS Recovery again and flashed the OS and Gapps. Only after that I did step 3 - formating. The result ist the same bootloop as in the beginning.
2. I flashed the stock MIUI ROM again (which woks fine). Then I flashed TWRP, transfered the OS and GApps file and installed. I did not wipe anything, just used "format data" like above.
In both cases the OS does not start. After a while displaying the LOS-logo the phone reboots to recovery.
What did work:
I downloaded lineage-18.1-20211126-nightly-vayu-signed.zip, one version before the latest verion and the corresponding recovery lineage-18.1-20211126-recovery-vayu.img
I flashed only the OS, and no GApps -- and it launched successfully. Installing with the latest GApps failed again.
Install older gapp, not all gapp is compatible
Phone OS: OxygenOS 11 EU
PC OS: Windows 11 x64
I'm trying to unlock the bootloader so that I could debloat my phone, install some magisk modules, and GCam.
While ADB normally sees my phone without issues, it's not recognized in Fastboot mode. In the Devices Manager window, the phone is shown as a generic Android device with the yellow warning sign (only during Fastboot, correctly detected as OP7Pro otherwise).
I tried installing ADB from multiple sources, and even used mauronofrio's Tool All In One to no avail. The guides to unlock bootloader don't make any mentions of this issue, and online I've only managed to find very old unsolved threads for other phones.
So, your system doesn't recognize the phone in fastboot mode ?
Did you tried to uninstall the device in the device manager, then plug it back ?
draentor said:
So, your system doesn't recognize the phone in fastboot mode ?
Did you tried to uninstall the device in the device manager, then plug it back ?
Click to expand...
Click to collapse
Good news, not sure why but today it was recognized, and installing TWRP and Magisk seemed to go smoothly.
I now have another question: this post (from 2019) mentions that I should've not installed Magisk the way I did.
I did the following:
1. unlock bootloader via Tool All In One
2. update OxygenOS via the notification I received, then reboot
3. install TWRP via Tool All In One
4. install Magisk via the TWRP menu and app (using the recommended choice)
What instead the guide says is: after TWRP and Magisk installed, update without rebooting, then install TWRP A/B Retention Script, then install Magisk to Inactive Slot and not the recommended Direct Install.
Could I have issues of any kinds, maybe update related, with these premises? If yes, what can I do to fix them?
Nevermind, phone's dead now. I will open another thread about it.
I think this guide is outdated.
That's what worked for me (Read everything before beginning) :
Unlock the bootloader
Update to the last OxygenOS version
Use Oxygen Updater app to be really up-to-date
Install TWRP
To do so, get the latest TWRP .img file here : https://twrp.me/oneplus/oneplus7pro.html
Get the latest twrp-installer.zip file too
It's ready for Android 11, maybe Android 12, I didn't tried
Don't forget to check "Developer options" in system settings
With your phone plugged in your computer, use adb commands and reboot to fastboot with "adb reboot bootloader"
Then, load TWRP with "fastboot boot twrp.img". Of course, you need to put the latest TWRP image file previously downloaded in the same folder and rename it "twrp.img"
In TWRP, go to Advanced then press "Flash Current TWRP"
Done !
Then, follow those instructions :
Wipe -> Factory Reset + : Wipe Data, System, Cache and Dalvik Cache
Install -> Flash ROM : Use the install function and install the ROM
Install -> Flash TWRP Installer : Don't reboot, go back and install as the previous step
Reboot -> Recovery : Reboot TWRP and it automatically load the other slot
Wipe -> Format Data : Click and type yes
Reboot -> System : Just reboot and it should load the installed ROM
Reboot to recovery
Install -> Magisk
Reboot -> System
Install -> Whathever you want
Reboot -> System
draentor said:
I think this guide is outdated.
That's what worked for me (Read everything before beginning) :
Unlock the bootloader
Update to the last OxygenOS version
Use Oxygen Updater app to be really up-to-date
Install TWRP
To do so, get the latest TWRP .img file here : https://twrp.me/oneplus/oneplus7pro.html
Get the latest twrp-installer.zip file too
It's ready for Android 11, maybe Android 12, I didn't tried
Don't forget to check "Developer options" in system settings
With your phone plugged in your computer, use adb commands and reboot to fastboot with "adb reboot bootloader"
Then, load TWRP with "fastboot boot twrp.img". Of course, you need to put the latest TWRP image file previously downloaded in the same folder and rename it "twrp.img"
In TWRP, go to Advanced then press "Flash Current TWRP"
Done !
Then, follow those instructions :
Wipe -> Factory Reset + : Wipe Data, System, Cache and Dalvik Cache
Install -> Flash ROM : Use the install function and install the ROM
Install -> Flash TWRP Installer : Don't reboot, go back and install as the previous step
Reboot -> Recovery : Reboot TWRP and it automatically load the other slot
Wipe -> Format Data : Click and type yes
Reboot -> System : Just reboot and it should load the installed ROM
Reboot to recovery
Install -> Magisk
Reboot -> System
Install -> Whathever you want
Reboot -> System
Click to expand...
Click to collapse
Thanks, I'll save it for next time. Unfortunately the phone's dead and I'm not sure how I got there, nor how or if I can recover it. I made a thread here https://forum.xda-developers.com/t/op7pro-dead-black-screen-wont-turn-on.4387537/