Hi everyone,
i have a issue with my oneplus 8.
after i tried to root my one plus 8 and failed in doing so,
it's gone in to a fastboot mode loop.
the phone has 2 modes now:
- Off
- fastboot mode
i tried using the MSM tool, here's what i have done:
- downloaded the latest Qualcomm drivers (Qualcomm HS-USB QDLoader 9008)
- downloaded the firmware for oneplus 8 with the MSM tool included in the firmware download.
(i've tried 2 different version of the firmware "instantnoodle_15_E.34_210201" and instantnoodle_15_E.30_200930
- put windows 10 in test mode
- run MSM a administrator
- tried different usb ports and 2 usb cables (my pc only has usb 3.0)
but i keep having the same problem:
i can get the phone in edl mode by turing it off and holding the volume buttons for a few seconds and the plugging it to the pc.
in device manager i can see the phone as QDloader 9008.
in the MSM app the correct port shows up in the list, but it never connects.
it keeps saying waiting for device and status connecting is N/A.
also after a few seconds the phone exits out of edl mode en goes back to fastboot mode.
can anyone advice me of what the issue could be?
i'm at a loss here and i hope my phone isn't broken/lost.
thank you!
cruz03 said:
Hi everyone,
i have a issue with my oneplus 8.
after i tried to root my one plus 8 and failed in doing so,
it's gone in to a fastboot mode loop.
the phone has 2 modes now:
- Off
- fastboot mode
i tried using the MSM tool, here's what i have done:
- downloaded the latest Qualcomm drivers (Qualcomm HS-USB QDLoader 9008)
- downloaded the firmware for oneplus 8 with the MSM tool included in the firmware download.
(i've tried 2 different version of the firmware "instantnoodle_15_E.34_210201" and instantnoodle_15_E.30_200930
- put windows 10 in test mode
- run MSM a administrator
- tried different usb ports and 2 usb cables (my pc only has usb 3.0)
but i keep having the same problem:
i can get the phone in edl mode by turing it off and holding the volume buttons for a few seconds and the plugging it to the pc.
in device manager i can see the phone as QDloader 9008.
in the MSM app the correct port shows up in the list, but it never connects.
it keeps saying waiting for device and status connecting is N/A.
also after a few seconds the phone exits out of edl mode en goes back to fastboot mode.
can anyone advice me of what the issue could be?
i'm at a loss here and i hope my phone isn't broken/lost.
thank you!
Click to expand...
Click to collapse
did u click enum on msm tool?
thattechguy_69 said:
did u click enum on msm tool?
Click to expand...
Click to collapse
Yes, i did.
i also put it in EU mode and tried it in target mode.
cruz03 said:
Yes, i did.
i also put it in EU mode and tried it in target mode.
Click to expand...
Click to collapse
Refer to this guide
-- Reinstall Qualcomm HS-USB QDLoader 9008 drivers
-- Bear in mind that EDL mode will timeout after a few seconds of no activity.
rodken said:
Refer to this guide
-- Reinstall Qualcomm HS-USB QDLoader 9008 drivers
-- Bear in mind that EDL mode will timeout after a few seconds of no activity.
Click to expand...
Click to collapse
That's the guide i used, i also already installeld those drivers.
my phone shows up as QDloader 9008 in device manager.
the MSM tool just won't recognize / connect my phone before it exits edl mode.
used the IN21BA tools from the guide.
i tried it with the OOS 11.0.4.4 and the OOS 11.0 with no luck.
rodken said:
Refer to this guide
-- Reinstall Qualcomm HS-USB QDLoader 9008 drivers
-- Bear in mind that EDL mode will timeout after a few seconds of no activit
Click to expand...
Click to collapse
That's the guide i used, i also already installeld those drivers.
my phone shows up as QDloader 9008 in device manager.
the MSM tool just won't recognize / connect my phone before it exits edl mode.
used the IN21BA tools from the guide.
i tried it with the OOS 11.0.4.4 and the OOS 11.0 with no luck.
Click to expand...
Click to collapse
-- ONLY use an original OnePlus red cable to connect to PC. This is the recommended cable for data transfer.
-- Try to use a USB 2.0 port if your PC has one [USB 3.0 ports will yield some issues]
-- ALWAYS run the MSM.exe in administrator mode.
-- Check the system BIOS and see that you have a checkbox to disable legacy USB devices.
-- Enter your Microsoft Windows's Hardware Setup Utility and simply disable the Internal USB 3.0 Controller.
rodken said:
-- ONLY use an original OnePlus red cable to connect to PC. This is the recommended cable for data transfer.
-- Try to use a USB 2.0 port if your PC has one [USB 3.0 ports will yield some issues]
-- ALWAYS run the MSM.exe in administrator mode.
Click to expand...
Click to collapse
i've used the original oneplus usb cable and run the tool in admin mode.
my pc does not have usb 2.0 only 3.0 anyway to solve this issue?
cruz03 said:
i've used the original oneplus usb cable and run the tool in admin mode.
my pc does not have usb 2.0 only 3.0 anyway to solve this issue?
Click to expand...
Click to collapse
Re-read the edits on my previous post.
i'm gonna try the advice from rodken out.
i'll update if it worked maybe it will help someone out.
the phone is fixed.
but i had it brought to a local repair shop a couple after hours i made this thread.
the repair shop fixed the phone but i don't know how they did it.
but i have feeling that the 2 tips from rodken would have solved the issue i was having.
because the phone was being recognized by the pc as QDloader 9008
but not by the MSM tool.
with a little program called TOSHIBA HWsetup you can change both the
disable legacy USB devices and the USB 3.0 settings.
hope this helps someone out in the future.
thank you all!
Thank you
I'm trying to downgrade my one plus 8 T-mobile from android 13 to 11 through msm tool but my msm tool isn't showing any port.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sidgotdis said:
I'm trying to downgrade my one plus 8 T-mobile from android 13 to 11 through msm tool but my msm tool isn't showing any port.View attachment 5922643
Click to expand...
Click to collapse
Your device is not communicating with the MSM Tool.
-- Try a different cable and/or USB Port.
when I try to put in on edl mode, I can see the qualcom driver pop up in device manager , I've tried different usb port ... just can't see anything in msm tool.
I don't think there's any issue with my USB port, might be with the cable, I've to buy another one then. but how can i be sure it's the cable? Does msm tool show ports for any other devices if connected?
Sidgotdis said:
when I try to put in on edl mode, I can see the qualcom driver pop up in device manager , I've tried different usb port ... just can't see anything in msm tool.
I don't think there's any issue with my USB port, might be with the cable, I've to buy another one then. but how can i be sure it's the cable? Does msm tool show ports for any other devices if connected?
Click to expand...
Click to collapse
MSM tool doesn't recognize your device. Therefore, if ADB works just fine, and the computer recognizes your phone in fastboot mode, you might want to consider if you need to reinstall the
Qualcomm USB Driver which allows you to connect devices having the Qualcomm Chipset to the Windows Computer.
If you are on Window 8 or later, you might need to disable driver signature verification.
Open Command Prompt on your PC
Type in the following code in the CMD window
Code:
bcdedit /set testsigning on
Now reboot your PC to enter Test Mode
After the installation process is over, you may exit the Test mode by entering the below code
Code:
bcdedit /set testsigning off
You might want to also consider purchasing a deep flash cable.
rodken said:
MSM tool doesn't recognize your device. Therefore, if ADB works just fine, and the computer recognizes your phone in fastboot mode, you might want to consider if you need to reinstall the
Qualcomm USB Driver which allows you to connect devices having the Qualcomm Chipset to the Windows Computer.
If you are on Window 8 or later, you might need to disable driver signature verification.
Open Command Prompt on your PC
Type in the following code in the CMD window
Code:
bcdedit /set testsigning on
Now reboot your PC to enter Test Mode
After the installation process is over, you may exit the Test mode by entering the below code
Code:
bcdedit /set testsigning off
You might want to also consider purchasing a deep flash cable.
Click to expand...
Click to collapse
Finally did it, downgraded it to 11. All thanks to you mate. Been stuck on this for days. Love you Bro!
Related
I'm wondering if anyone has a Nexus 5 D821 motherboard in working condition that they would like to get rid of. Or if anyone knows of a way to get into Qualcomm 9008 mode from LGE Android Platform USB Serial Port. The phone seems dead, doesnt react to button presses, Vol Up+Vol Down+ Power doesnt change anything, the phone restarts back into LGE Android Platform USB Serial Port mode. No download mode. From what I know my EMMC wasn't dead (passed all the Board Diag Tests). Phone died after I flashed SBL1 with boarddiag (Even though I was told not to...)
There is a guide in general forums.
wangdaning said:
There is a guide in general forums.
Click to expand...
Click to collapse
Any links? From what i know i have tried all of them (LG flash tool, Board diag) I just cant get the phone to show up as anything other than the LGE Android Platform USB Serial Port
Excudent said:
Any links? From what i know i have tried all of them (LG flash tool, Board diag) I just cant get the phone to show up as anything other than the LGE Android Platform USB Serial Port
Click to expand...
Click to collapse
I hard bricked my phone yesterday and was stressing out quite a bit! Luckily I found this guide: http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Note: I assume that you know what you are doing. Since you know about Qualcomm HS-USB QDLoader 9008 mode, you probably do, but you can do some serious harm with this mode.
Essentially, the gist of the guide comes down to installing the qualcomm drivers so that the phone becomes detected as a Qualcomm HS-USB QDLoader 9008. After this, you can use Boarddiag as you are used to to reflash the partitions. Note that for me, the phone was not in sahara dload mode and Boarddiag would not work. What I had to do was the following (these steps are done after the drivers are properly installed)
Unplug the Nexus 5 from your computer
Open the back cover and remove the 6 top screws holding the other protective cover
Disconnect the battery cable for 5 seconds. Reconnect it after
While holding the volume up and down button, plug it into your computer. It should now be in Sahara download mode and Boarddiag should work.
Let me know how everything goes!
Hi guys. I come here in search for help as I already tried possibly all the methods and unbrick solutions that I saw to fix my Oneplus One. Basically when I turn it on it gets stuck on "1+ powered by android" screen. I can't go to Recovery Mode and I can only enter the Fastboot mode if I'm not connected to PC. It doesn't get recognized when I connect it to PC unless I press the "Vol. up + Power" button combination. After this, it gets recognized on windows' device manager as "Qualcomm HS-USB QDLoader 9008" and the phone gets in a mode that doesn't show anything on the screen and apparently necessary to do what's described in this post. This was the last thing that I've tried after I tried several other solutions.
Thanks in advance to anyone who might help me. I love this phone and I hate just the thought of buying a new one.
Twody said:
Hi guys. I come here in search for help as I already tried possibly all the methods and unbrick solutions that I saw to fix my Oneplus One. Basically when I turn it on it gets stuck on "1+ powered by android" screen. I can't go to Recovery Mode and I can only enter the Fastboot mode if I'm not connected to PC. It doesn't get recognized when I connect it to PC unless I press the "Vol. up + Power" button combination. After this, it gets recognized on windows' device manager as "Qualcomm HS-USB QDLoader 9008" and the phone gets in a mode that doesn't show anything on the screen and apparently necessary to do what's described in this post. This was the last thing that I've tried after I tried several other solutions.
Thanks in advance to anyone who might help me. I love this phone and I hate just the thought of buying a new one.
Click to expand...
Click to collapse
Why not just enter into fastboot,install fastboot drivers in pc and connect device in fastboot mode to pc and flash cos13?
Mr.Ak said:
Why not just enter into fastboot,install fastboot drivers in pc and connect device in fastboot mode to pc and flash cos13?
Click to expand...
Click to collapse
I already intalled fastboot drivers and put the phone in fastboot mode. When I plug the phone to the PC it doesn't get recognized. Can you tell me how to install the fastboot drivers? Maybe I missed something.
Twody said:
I already intalled fastboot drivers and put the phone in fastboot mode. When I plug the phone to the PC it doesn't get recognized. Can you tell me how to install the fastboot drivers? Maybe I missed something.
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2588979
Which windows you're using?
Mr.Ak said:
https://forum.xda-developers.com/showthread.php?t=2588979
Which windows you're using?
Click to expand...
Click to collapse
Yes, that was the one I installed. I'm using windows 10 x64.
Twody said:
Yes, that was the one I installed. I'm using windows 10 x64.
Click to expand...
Click to collapse
Try using win7.
PS: did you launched the tool with administrator privileges?
I download the latest adb and fastboot drivers from Android Studio site under command line tools.
Here is a good Article on how to configure the drivers on your machine.https://www.xda-developers.com/adb-fastboot-any-directory-windows-linux/
I wanted to change my ROM from a xiaomi.eu ROM to Lineage OS 15.1 https://forum.xda-developers.com/mi-...-aqua-t3667638.
I had already rooted my phone and installed TWRP. I rebooted to TWRP and wiped cache, dalvik cache, data and system.
After that I installed the 8.5.1.0 firmware, that was done successfully. After that I tried to flash lineage-15.1-20180202-UNOFFICIAL-libra.zip in TWRP but I got an error message at an early stage. Eventually I switched off my phone through the menu of TWRP.
This was the last time I've seen my phone alive because no matter what I do, it doesn't respond at all.
I've tried to flash it through XiaoMiFlash, but my computer (nor my Macbook) doens't recognize my phone when I connect it through a USB cable
What to do guys?
Any possibilities that you've fully-drained your battery? Try to left your device charging on standard wall charger for at least 2 hours.
If it still bricked, you might wanna dissassemble the phone and disconnect the battery from the board and start flashing MiUi fastboot rom vie EDL mode.
kopter36 said:
Any possibilities that you've fully-drained your battery? Try to left your device charging on standard wall charger for at least 2 hours.
If it still bricked, you might wanna dissassemble the phone and disconnect the battery from the board and start flashing MiUi fastboot rom vie EDL mode.
Click to expand...
Click to collapse
I've never had any problems with the battery. And when I entered TWRP I saw the battery was 80%. But I'll try to charge my phone for at least 2 hours, just in case.
In order to perform flashing MIUI Fastboot via EDL mode, the computer should recognize the phone when it is connected through USB cable, right? If so, that's not the case with my phone. My computer is saying that an unknown device is connected to it. Do you think this will be different when I remove the battery?
MastaBlasta070 said:
My computer is saying that an unknown device is connected to it.
Click to expand...
Click to collapse
Perhaps the driver is missing? The next step will depend on the registered USB device ID, so please quote it. My Mi4C in emergency download mode displays the following:
Linux, command lsusb:
Code:
Bus 003 Device 003: ID 05c6:9008 Qualcomm, Inc. Gobi Wireless Modem (QDL mode)
or Windows, in Device Manager as Ports (COM & LPT) / Qualcomm HS-USB QDLoader 9008 (COM5):
Code:
USB\VID_05C6&PID_9008
You should see one of these: 9008, 9006, 0002, 0001 or similar.
MastaBlasta070 said:
I've never had any problems with the battery. And when I entered TWRP I saw the battery was 80%. But I'll try to charge my phone for at least 2 hours, just in case.
In order to perform flashing MIUI Fastboot via EDL mode, the computer should recognize the phone when it is connected through USB cable, right? If so, that's not the case with my phone. My computer is saying that an unknown device is connected to it. Do you think this will be different when I remove the battery?
Click to expand...
Click to collapse
Unknown device probably indicated missing driver for the QCom EDL mode as @k23m mentioned above. Try to install the driver first. If you are on Windows 8 and above, you might need to disable driver signature enforcement first.
If all going nicely, MiFlash should recognize your device based on COM port and not device id.
Need help. I was using Miracle Box to flash stock ROM, I don't know how but the phone (Micromax E453) is bricked now. I tried to start phone in Meta Mode (swiched off phone connected to PC by holding volume up button), it worked once, then following some tutorials I uninstalled (and checked, Delete the driver software for this device) MTK USB COM driver under port. Since then phone is not turning on and PC is not recognizing the device. Tired changing the USB cable and even tried it on another laptop, but no go. Kindly share what else I can try. PC has Windows 10 64 bit and MTK preloader vcom driver always has yellow exclamation mark (always installs with error code 10). I have disabled driver signature verificiation.
vnandwana said:
Need help. I was using Miracle Box to flash stock ROM, I don't know how but the phone (Micromax E453) is bricked now. I tried to start phone in Meta Mode (swiched off phone connected to PC by holding volume up button), it worked once, then following some tutorials I uninstalled (and checked, Delete the driver software for this device) MTK USB COM driver under port. Since then phone is not turning on and PC is not recognizing the device. Tired changing the USB cable and even tried it on another laptop, but no go. Kindly share what else I can try. PC has Windows 10 64 bit and MTK preloader vcom driver always has yellow exclamation mark (always installs with error code 10). I have disabled driver signature verificiation.
Click to expand...
Click to collapse
Did you have USB debugging enabled in the device's system settings before it got bricked? If not, you might not get it to connect via USB and be recognized.
Sent from my SM-S767VL using Tapatalk
Droidriven said:
Did you have USB debugging enabled in the device's system settings before it got bricked? If not, you might not get it to connect via USB and be recognized.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
Thank you for your response. Yes, USB debugging was enabled before it got bricked. I was able to successfully see my device when I ran adb -devices command. I was also able to run fastboot commands. Now its completely dead.
Hi,
My oneplus 8 is notshowing the Qualcomm HS-USB QDLoader 9008 in device manager,therefore i can't usethe unbrick tool,any help or advice please
Install the latest Qualcomm drivers
GraveDigger176 said:
Install the latest Qualcomm drivers
Click to expand...
Click to collapse
Where from please
stavros67 said:
Where from please
Click to expand...
Click to collapse
From this thread............https://forum.xda-developers.com/oneplus-8/how-to/op8-unbrick-tool-to-restore-device-to-t4085877
GraveDigger176 said:
From this thread............https://forum.xda-developers.com/oneplus-8/how-to/op8-unbrick-tool-to-restore-device-to-t4085877
Click to expand...
Click to collapse
Hi,
I press volume up & volume down together,insert cable to pc,the phone is not showing up on device manager,and sometimes the phone goes into fastboot mode?
USB debugging enabled on your phone ?
GraveDigger176 said:
USB debugging enabled on your phone ?
Click to expand...
Click to collapse
Yes,it will not show up Qualcomm HS-USB QDLoader 9008 in device manager,seems to make no difference what drivers i download,seem convinced there is something not right with the phone.
That's right what it shows QDLOADER 9800 what phone you tmo or international\india version
Use different pc or laptop
GraveDigger176 said:
That's right what it shows QDLOADER 9800 what phone you tmo or international\india version
Use different pc or laptop
Click to expand...
Click to collapse
I have the oneplus 8,i have tried a different pc,with the same results.Both pc's recognise the phone,and i can transfer files accross,it will just not show QDLOADER 9800 in device manager.
The phone must be completely shutdown before the cable is inserted.
1: power phone down
2: start your msm app and have it ready
3: hold both volume up and down at the same time and do not release
4: plug USB cable (that is already attached to the PC) into the phone
Your phone will not show any indication that it has powered but you should see it in the MSM tool as well as the device manager.
Juxto2010 said:
The phone must be completely shutdown before the cable is inserted.
1: power phone down
2: start your msm app and have it ready
3: hold both volume up and down at the same time and do not release
4: plug USB cable (that is already attached to the PC) into the phone
Your phone will not show any indication that it has powered but you should see it in the MSM tool as well as the device manager.
Click to expand...
Click to collapse
Have tried this countless times on two different pc's,it does not show up on msm or device manager.Also the when pressing and holding said buttons the phone will sometimes go into fastboot mode.
Try the following, power up your phone let it boot, if is finish with booting plug in your phone with the USB cable and look whether USB debugging is showing in status bar at the left bottom of the screen. If it shows USB debugging open CMD command window and type "adb reboot edl" and see what happens. Before you should start your msn tool that you can tap the enrum button maybe this works
Sorry,bottom of which screen
The phone shows in device manager when powered on and connect to the usb cable as " universal Serial Bus devices - IN2013,then when i try and go into edl mode the device manager does not see it's connected.