CyanogenMod 11 is a free, community built distribution of Android 4.4 (KitKat) which greatly extends the capabilities of your phone.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh really hard at you.
*/
Hey Guys,
So I was searching for a CyanogenMod Rom for the Galaxy ACE 3 the Broadcom model (3G) and after searching for some long time i found out that a CyanogenMod 11 Rom is actually available but it wasn't on XDA Forums so i thought of sharing it with you guys, of course i am not the developer of this Rom. Full credits goes to ZIM555. I just wanted to share it with everyone (I hope there is no problem with that if so please close this thread). The source from where i have discovered it from is in Russian so ill just translate it for you guys.
Pre-requisites:
*ClockworkMod Recovery https://yadi.sk/d/uUlc7MzTbfVuY
Installation (first time/new users):
*Flash and install the New CWM recovery
*In order to install the New CWM recovery (Open the old CWM Install it from sdcard then Reboot Recovery under Advanced)
*Do a Nandroid backup!
*Do a wipe data/factory reset
*Install the ROM from sdcard
*Reboot
Working:
*Audio
*Bluetooth
*Bluetooth tethering
*Camera
*USB Mass Storage
*USB tethering
*Wi-Fi Hotspot
*GPS
*Wi-Fi
*Lights
*Sensors
*Telephony - calling, messaging, mobiledata
*Touchscreen (multitouch)
*Camcorder
*OMX encoders/decoders
Not working:
*offline charging
Downloads:
CyanogenMod 11 (28.12.2014) https://yadi.sk/d/s6aCKPsSdgAPf
Note:
Here is the actual source : http://4pda.ru/forum/index.php?showtopic=486975&st=3560
GitHub: https://github.com/ZIM555
Thanks to:
[email protected] (The Original Developer)
thread updated please take a backup of your efs partition now
you can install it on dual sim variant as well
here is a video for this rom and if you want to install it follow my steps in this video https://www.youtube.com/watch?v=0EPRwEbFh7w
Thanks for making this ROM available in English.
The original Russian thread has added 70 pages since this link was posted. Is there an updated ROM in one of the newer posts? Has the offline charging problem been fixed? By offline charging, I presume you mean billing, not battery charging.
Status says Bluetooth is working, but on my phone the toggle won't stay on. After sliding it to the "on" position, it quickly retracts to the "off" position. Has anyone else had this problem?
I need a google cloud platform account. I can't port Lineage 14.1 with my slow connection and pc. Just give me any account that registered there. I will start porting.
Another port of LineageOS for the Homtom HT10. I finally managed to make it work. All credits go to the user "Verevka", who posted the LOS 14.1 rom for the Vernee Apollo Lite that I used to make this port and to this porting guide, which helped me get Android 7.1.1 to the Homtom HT10.
I am not responsible for any damage done to you, your device or anything that might be caused by downloading or flashing this rom to your device. Therefore this disclaimer:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Do a factory reset before flashing the rom. The first boot
after flashing always takes some time. Don't interrupt the booting process and go make yourself a cup of coffee in the meantime.
Use arm64 Gapps for 7.1.
What works:
- Camera
- Wifi
- Cellular
What doesn't work:
-Bluetooth
- Magisk (root is built in, flash the zip from the LOS downloads page and enable it in the developer settings)
Download Link
This guide is based on information posted here:
GUIDE
A8 GSI by prashantp01
All credits for ozontec, and for prashantp01 for creating GSI for A8+
AOSP PIE GSI on A750FN
I'm not responsible for whatever damage this can cause to your device
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
How to:
Update to latest official firmware (tested on ARIC and ARL4)
Make full boot at least once
Make sure you have a TWRP installed, follow *click me for TWRP*
Boot once after installing TWRP
Download the latest AOSP GSI
Boot into recovery
Perform a Factory Reset, don't touch System or any other partitions
Flash Magisk
Flash AOSP image as System
Flash Camera Fix *click me for fix*
First boot may take up to 10 minutes
Download:
AOSP GSI - Pick arm64 one with "aonly", rest is up to you!
If anything went wrong, flash stock firmware with ODIN!
What is working:
-Calls
-Wifi, Bluetooth, NFC
-Camera
-SD Card
-Dual Sim
-Vibrations, Speaker, Microphone, Sensors
-Everything but...
What is not working:
-USB to PC
-VoLTE / VoWiFi
-NFC menu is laggy, very laggy...
Remember to say "thank you" to those people:
Credits:
@ozontec for creating raw guide
@prashantp01 for creating GSI for A8/A8+
@ashyx for TWRP
Screenshots soon
compatibility
does it work for A750FNXXU1ARK2/ARK4?
Which file do I need to flash, vanilla, floss or gapps?
NickDeveloper said:
does it work for A750FNXXU1ARK2/ARK4?
Which file do I need to flash, vanilla, floss or gapps?
Click to expand...
Click to collapse
It should work with EVERY firmware on FN, but I simply was not able to try it out this way. Vanilla don't have gapps, use gapps imo.
This is awesome, thanks. Would there be a way to use stock camera app for wide lens support?
hhadi said:
This is awesome, thanks. Would there be a way to use stock camera app for wide lens support?
Click to expand...
Click to collapse
Only way to do it would be porting default camera app together with libs/drivers :c
Finger print option is not there in the settings for me. Is this a /vendor problem?
It sucks to be a a750gn user right now
Bootloop after flashing (help)
Erecik said:
This guide is based on information posted here:
GUIDE
A8 GSI by prashantp01
All credits for ozontec, and for prashantp01 for creating GSI for A8+
AOSP PIE GSI on A750FN
I'm not responsible for whatever damage this can cause to your device
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
How to:
Update to latest official firmware (tested on ARIC and ARL4)
Make full boot at least once
Make sure you have a TWRP installed, follow *click me for TWRP*
Boot once after installing TWRP
Download the latest AOSP GSI
Boot into recovery
Perform a Factory Reset, don't touch System or any other partitions
Flash Magisk
Flash AOSP image as System
Flash Camera Fix *click me for fix*
First boot may take up to 10 minutes
Download:
AOSP GSI - Pick arm64 one with "aonly", rest is up to you!
If anything went wrong, flash stock firmware with ODIN!
What is working:
-Calls
-Wifi, Bluetooth, NFC
-Camera
-SD Card
-Dual Sim
-Vibrations, Speaker, Microphone, Sensors
-Everything but...
What is not working:
-USB to PC
-VoLTE / VoWiFi
-NFC menu is laggy, very laggy...
Remember to say "thank you" to those people:
Credits:
@ozontec for creating raw guide
@prashantp01 for creating GSI for A8/A8+
@ashyx for TWRP
Screenshots soon
Click to expand...
Click to collapse
Am I the only one who is having a bootloop after flashing? (I did everything exactly like in the instructions.) Can anyone help me?
limeswift said:
This guide is based on information posted here:
GUIDE
A8 GSI by prashantp01
All credits for ozontec, and for prashantp01 for creating GSI for A8+
AOSP PIE GSI on A750FN
I'm not responsible for whatever damage this can cause to your device
Am I the only one who is having a bootloop after flashing? (I did everything exactly like in the instructions.) Can anyone help me?
Click to expand...
Click to collapse
Same here, I spent whole day on this thing and tried it 5+ times and lo luck. Maybe because I was trying it on A750F varient
I try to install 4 times. SM-A750FN
2 times got boot without network, ROM detects 2 SIM cards but unknown, cant search for networks, no phone numbers, only WiFi works.
Erecik said:
This guide is based on information posted here:
GUIDE
A8 GSI by prashantp01
All credits for ozontec, and for prashantp01 for creating GSI for A8+
AOSP PIE GSI on A750FN
I'm not responsible for whatever damage this can cause to your device
How to:
Update to latest official firmware (tested on ARIC and ARL4)
Make full boot at least once
Make sure you have a TWRP installed, follow *click me for TWRP*
Boot once after installing TWRP
Download the latest AOSP GSI
Boot into recovery
Perform a Factory Reset, don't touch System or any other partitions
Flash Magisk
Flash AOSP image as System
Flash Camera Fix*click me for fix*
First boot may take up to 10 minutes
Download:
AOSP GSI - Pick arm64 one with "aonly", rest is up to you!
If anything went wrong, flash stock firmware with ODIN!
What is working:
-Calls
-Wifi, Bluetooth, NFC
-Camera
-SD Card
-Dual Sim
-Vibrations, Speaker, Microphone, Sensors
-Everything but...
What is not working:
-USB to PC
-VoLTE / VoWiFi
-NFC menu is laggy, very laggy...
Remember to say "thank you" to those people:
Credits:
@ozontec for creating raw guide
@prashantp01 for creating GSI for A8/A8+
@ashyx for TWRP
Screenshots soon
Click to expand...
Click to collapse
A7 2018 is released with Oreo,So It's support A/B Partition
a750fn android pie
in my a750fn with this firmware A750FNPUU1BSC4, the aosp gsi rom not work. The only custom rom work for me is Android P (PR1) sGSI that is unofficial rom and it is google pixel rom but data not work! please can you help me?
I followed all the instructions.... Bootloop on SM-A750GN.
This Havoc OS version is working on my 750FN
https://forum.xda-developers.com/showthread.php?p=79267026
I've updated to newest Pie One UI Firmware first.
I had Havoc OS at my Xperia XZ and its a very light rom.
And I like the customization features.
With GApps aroma you can pixelfy it very well.
Camera is also working.
In my opinion the battery drain is more less than Stock Samsung ROM (and i installed a lot Google stuff with GApps aroma).
There are two annoying bugs;
-In windows no Drives appaer with usb connection (MTP device is present in device manager)
-No auto brightness.
Maybe someone could help with this two bugs.
It dose not work on my A750F Pie version. The build number is A750FNPUU1BSC4. I tried this rom to flash but I faced with bootloop every time, I tried other versions of GSI also but not worked yet!
Is there any solition? Plz help me!
As you can see in my post, it's for A750FN!
Erecik said:
As you can see in my post, it's for A750FN!
Click to expand...
Click to collapse
Can you tell me why it will work only for A750FN and not other firmware version like GN etc.
blazzer12 said:
Can you tell me why it will work only for A750FN and not other firmware version like GN etc.
Click to expand...
Click to collapse
It's not firmware difference. GN, FN, F, G, etc are different HARDWARE versions, so some minor changes are present in every version of phone. That makes it works only on FN
Erecik said:
It's not firmware difference. GN, FN, F, G, etc are different HARDWARE versions, so some minor changes are present in every version of phone. That makes it works only on FN
Click to expand...
Click to collapse
Thank you for clearing that up for me.
Hijacks said:
This Havoc OS version is working on my 750FN
https://forum.xda-developers.com/showthread.php?p=79267026
I've updated to newest Pie One UI Firmware first.
I had Havoc OS at my Xperia XZ and its a very light rom.
And I like the customization features.
With GApps aroma you can pixelfy it very well.
Camera is also working.
Click to expand...
Click to collapse
Sorry to ask that annoying question, but do you know if VoLTE and or WiFi Calling are working on any of the GSI ROMs?
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this TREBLE
* SUPPORT before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Alright so this is only done on user demand since GSI's were not booting with stock and custom rom vendor images
Install Instruction:
* Flash OFFICIAL TWRP
* Format /system, /data and /cache
* Flash vendor zip:
https://sourceforge.net/projects/arrow-os/files/EXTRAS/X01BD/P-GSI-Vendor.zip/download
* Flash boot.img:
https://sourceforge.net/projects/arrow-os/files/EXTRAS/X01BD/boot_permissive.img/download
* Install any Pie GSI system image using TWRP (Install image -> choose your system.img -> select system partition)
* Reboot
Known issues:
You tell me
Bug report:
All bug reports without any logs will just be ignored.
Where can i find GSI?
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Working GSI's:
* PhhAOSP pie
* ArrowOS GSI 9.x
* AOSiP GSI pie
Lemme know and I'll update it here!
Contributors
@kubersharma, @bauuuuu
(GPL kernel source: https://github.com/ArrowOS-Devices/...tree/9e41580d6c9fb2d5d896fef5ac5403a12d882d00 for the bootimge (kernel inside) linked)
PS: Generic System Image are made to support all treble devices but do not expect it to work as perfectly as a device specific build nor expect to have everything working!
ENJOY
reserved
reserved
Is it for real?
Will sGsi roms boot.?
Anubhav_singh said:
Will sGsi roms boot.?
Click to expand...
Click to collapse
This is basically for properly made GSI (built from sources for example: the one from phhusson or based on his sources)
I am not sure if OEM ported (sGSI) will boot
But we will see what we can do. Thanks
Wow, thanks for this. You and Bauuuuu always surprise us.
Will android q gsi boot
reverseflash said:
Wow, thanks for this. You and Bauuuuu always surprise us.
Click to expand...
Click to collapse
+1
@kubersharma the vendor image does not seem to work with OEM ported GSIs. I've tested MIUI but that got stuck on Asus logo, didn't reach the bootanimation.
I've attached a zip (2 logs), one was tested with the vendor image on this thread and second with default Arrow vendor.
As the OP says it's for source built pie GSIs
There is a huge background story on how messed the treble is in our device right now thanks to Asus, for having too much blob dependency on system.
If someone wants to try Q GSI dp6 (Generic or Pixel) should give a try after flashing my latest (20190812) LineageOS 16.0 build
https://sourceforge.net/projects/ku...12-UNOFFICIAL-X01DB-user-release.zip/download
kubersharma said:
If someone wants to try Q GSI dp6 (Generic or Pixel) should give a try after flashing my latest (20190812) LineageOS 16.0 build
https://sourceforge.net/projects/ku...12-UNOFFICIAL-X01DB-user-release.zip/download
Click to expand...
Click to collapse
I tried pixel gsi but that didn't even reach bootanimation. Did you flash any additional patches?
Edit: I flashed permissiver and fix_zygote.
Thank you kuber and bauuua for your work for our device
Please make one too for X00RD. Plz ?
Need of Vendor For Android 10 OOS
Need vendor for android 10 Oxygen OS ...it's time you havent updated vendors Dev's...thanks in advance
Hi, @kubersharma. Sorry for the off-topic question but I have an Asus Zenfone 4 (ZE554KL) on which with the Oreo and Pie upgrade ASUS standardized BLOBs but does not created a dedicated vendor partition, so no official treble support. I wish I could flash the GSIs on it. The part of creating the vendor partition is no problem, but would you have any tips or tutorials on how to properly move the files from /system/vendor to /vendor in a functional way and the boot img hack needed to boot? Thank you very much!
does it work on android 10??
hi thank you for the rom. Can you make one for zs551kl(zenfone 4 pro) thank you very much
Updated (10/2/2021):
Starting from now, every custom ROM that I modified or collected is now in other topics: Samsung Galaxy Core 2 ROMs, Kernels, Recoveries
Link: https://forum.xda-developers.com/f/samsung-galaxy-core-2-roms-kernels-recoveries.6988/
Disclaimer:
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I'm sorry if my English is bad as it's not my native language.
On this thread, I'm going to share a custom ROM that I like best for my Galaxy Core 2: Resurrection Remix.
ROM Information:
ROM Name: Resurrection Remix
ROM Version: v5.4.2
Based on: Android 5.1.0 Lollipop
Compatibility: For all Galaxy Core 2 model (SM-G355H/SM-G355M/SM-G355HN)
Features:
* Based on the original custom ROM made by @Ih24n.
* Removed some unnecessary apps.
* This is an odexed ROM, so it will save your storage and it will boot faster.
* All fix made by @Ih24n are intergrated.
* Built-in root is intergrated (Original custom ROM doesn't have built-in root).
* Updated v2:
- All fixes are integrated with an adblock host file.
- Fixed bug that cause bootloop after installing some apps.
* Added some tweaks in build.prop.
Bugs:
- SystemUI might restart sometimes.
- The screen might be glitched, but don't worry. There's no problem with that.
- Tell me if you have issues when using this ROM.
Requirements:
- A Galaxy Core 2 device (Your device must be in AOB1 firmware).
- Custom recovery (You should use TWRP).
How to install? (Updated in 25/8/2021)
1. Reboot your device to recovery mode.
2. Wipe: Dalvik-cache, Cache, Data, System.
3. Choose Install.
4. Choose file "RR_v5_Modified.zip"
5. Swipe to Install.
6. Flash GApps (optional).
7. Restart to System.
More information about this ROM:
http://www.sandroidteam.com/2016/10/custom-rom-resurrection-remix-rr-542.html
Download links (Updated in 25/8/2021):
ROM: Here
GApps: https://opengapps.org/
Kernel source: Here