Database Info

[ROM][PRA-LX1][11/05/2018]CodeOfHonor's AOSP 7.1.2 R36 for Huawei P8 Lite 2017

The Android Source Code
Android is an open source software stack created for a wide array of devices with different form factors. The primary purposes of Android are to create an open software platform available for carriers, OEMs, and developers to make their innovative ideas a reality and to introduce a successful, real-world product that improves the mobile experience for users.
We also wanted to make sure there was no central point of failure, where one industry player could restrict or control the innovations of any other. The result is a full, production-quality consumer product with source code open for customization and porting.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]All devices that use hi6250 chipset and use kernel 4.1.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP.
C432B161 firmware, restore it before flash the rom from here.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
Installation Guide:
Make sure to the stock backup saved on pc, I'm not responsible for any bricked or damage.
Reboot to TWRP.
Go to Wipe.
Choose Advance Wipe.
Check on Data and change file system to EXT4, will not ever boot with F2FS.
Wipe cache, data, dalvik and system.
Flash the rom.
Reboot and have fun then.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
Dual sim might will not work all variants, so don't waste your time by asking me to fix it.
You don't like it?, easy revert to Emui 5.x.
Downloads:
**02/01/2018**
aosp_7.1.2_r29-UNOFFICIAL-01022018-hi6250.zip
**03/01/2018**
aosp_7.1.2_r36-UNOFFICIAL-01032018-hi6250.zip
**25/01/2018**
aosp-7.1.2-20180125-Haky86-hi6250.zip
**04/02/2018**
Uploaded by Gabe Chan, thanks man.
**11/05/2018**
aosp_hi6250-7.1.2-N2G48H-20180510-CodeOfHonor.zip
Changelogs:
**02/01/2018**
Initial build
Android 7.1.2_r29
**03/01/2018**
Android 7.1.2_r36.
Fix USB & memories.
Security Patches: 5 October 2017
**25/01/2018**
Camera SHOULD work on every hi6250 now, so you have no excuse to say "it's not working with your builds/roms"
Fix audio on P10 Lite.
Add support to for Vulkan
**04/02/2018**
fix Magisk 15.3
Security Patches: January 2018
**11/05/2018**
boot up with f2fs by default
Source Code:
Device Tree:
https://github.com/codeofhonor-dev/android_device_huawei_hi6250
Kernel GPL:
https://github.com/codeofhonor-dev/android_kernel_huawei_hi6250
Vendors:
https://github.com/codeofhonor-dev/android_vendor_huawei_hi6250
Contributors
@haky 86
Source Code: https://github.com/codeofhonor-dev
Credits
Special thanks to @Meticulus for the immense work on hi6250 platform
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Linux 4.1.x
ROM Firmware Required: Emui 5.x
Based On: AOSP
Version Information
Status: stable
Created 2018-01-01
Last Updated 2018-01-02

** Reserved **

I will test it right now. Where can i find the TWRP?

karasoulas said:
I will test it right now. Where can i find the TWRP?
Click to expand...
Click to collapse
if you get the error 7, just follow the fix guide
https://forum.xda-developers.com/p8...n/recovery-twrp-huawei-p8-lite-2017-t3591762/

haky 86 said:
if you get the error 7, just follow the fix guide
https://forum.xda-developers.com/p8...n/recovery-twrp-huawei-p8-lite-2017-t3591762/
Click to expand...
Click to collapse
Boot and its amazing. The only problem is the camera. its not customizable. anyway thanks man , much love <3

karasoulas said:
Boot and its amazing. The only problem is the camera. its not customizable. anyway thanks man , much love <3
Click to expand...
Click to collapse
Will start release LineageOS based roms from tomorrow, just wait..actually better than nothing..
:good:

sadly, there is no way to fix the second bug

What a legend @haky 86 , thanks a lot

Any chance to get it for PRA devices ?
Thanks for your continous work on those phones.
Do we have any chance getting one of the PRA devices or does this hi6250 image works on them too ?
Thanks for your precious time,
Erwan,

Thanks for your work on this, got it to boot and it runs perfectly.
How do you suggest I root this rom, I tried magisk but it wouldn't boot afterwards.
My only other issue was that my SD card isn't usable and Android fails to format it.

also sd card doesnt work and video recording doesnt work. I didnt find any other bugs

karasoulas said:
also sd card doesnt work and video recording doesnt work. I didnt find any other bugs
Click to expand...
Click to collapse
sorry but video recording is fine for me, for sdcard I forget to add the fix for my kernel.
please wait next update

front video working. back video is says cant connect camera

karasoulas said:
front video working. back video is says cant connect camera
Click to expand...
Click to collapse
Here front & back video recording
might your variant is missed in the source. my one is pra-lx1 try with Footej and tell us more

pra-lx1 footej works fine. The stock app doesnt work tho.

stock camera working fine here. PRA-LX1 dual sim variant

Iocere said:
stock camera working fine here. PRA-LX1 dual sim variant
Click to expand...
Click to collapse
yep, I've pra-lx1 and it's fully works.

cian hackett said:
Thanks for your work on this, got it to boot and it runs perfectly.
How do you suggest I root this rom, I tried magisk but it wouldn't boot afterwards.
My only other issue was that my SD card isn't usable and Android fails to format it.
Click to expand...
Click to collapse
Install Magisk v14.0 via TWRP

Iocere said:
Install Magisk v14.0 via TWRP
Click to expand...
Click to collapse
This worked perfectly , I had been trying with v15.
Grabbed v14 from the main p8lite rooting thread and was had no issues. Thanks

pra-lx 1 dual sim and the back camera doesnt work on messenger instagram. dont know why.
Maybe reflashing the rom will fix it?

[TREBLE] Pie VENDOR-IMAGE to boot Pie-GSI on X01BD

Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this TREBLE
* SUPPORT before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Alright so this is only done on user demand since GSI's were not booting with stock and custom rom vendor images
Install Instruction:
* Flash OFFICIAL TWRP
* Format /system, /data and /cache
* Flash vendor zip:
https://sourceforge.net/projects/arrow-os/files/EXTRAS/X01BD/P-GSI-Vendor.zip/download
* Flash boot.img:
https://sourceforge.net/projects/arrow-os/files/EXTRAS/X01BD/boot_permissive.img/download
* Install any Pie GSI system image using TWRP (Install image -> choose your system.img -> select system partition)
* Reboot
Known issues:
You tell me
Bug report:
All bug reports without any logs will just be ignored.
Where can i find GSI?
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Working GSI's:
* PhhAOSP pie
* ArrowOS GSI 9.x
* AOSiP GSI pie
Lemme know and I'll update it here!
Contributors
@kubersharma, @bauuuuu
(GPL kernel source: https://github.com/ArrowOS-Devices/...tree/9e41580d6c9fb2d5d896fef5ac5403a12d882d00 for the bootimge (kernel inside) linked)
PS: Generic System Image are made to support all treble devices but do not expect it to work as perfectly as a device specific build nor expect to have everything working!
ENJOY

reserved

reserved

Is it for real?

Will sGsi roms boot.?

Anubhav_singh said:
Will sGsi roms boot.?
Click to expand...
Click to collapse
This is basically for properly made GSI (built from sources for example: the one from phhusson or based on his sources)
I am not sure if OEM ported (sGSI) will boot
But we will see what we can do. Thanks

Wow, thanks for this. You and Bauuuuu always surprise us.

Will android q gsi boot

reverseflash said:
Wow, thanks for this. You and Bauuuuu always surprise us.
Click to expand...
Click to collapse
+1

@kubersharma the vendor image does not seem to work with OEM ported GSIs. I've tested MIUI but that got stuck on Asus logo, didn't reach the bootanimation.
I've attached a zip (2 logs), one was tested with the vendor image on this thread and second with default Arrow vendor.

As the OP says it's for source built pie GSIs

There is a huge background story on how messed the treble is in our device right now thanks to Asus, for having too much blob dependency on system.

If someone wants to try Q GSI dp6 (Generic or Pixel) should give a try after flashing my latest (20190812) LineageOS 16.0 build
https://sourceforge.net/projects/ku...12-UNOFFICIAL-X01DB-user-release.zip/download

kubersharma said:
If someone wants to try Q GSI dp6 (Generic or Pixel) should give a try after flashing my latest (20190812) LineageOS 16.0 build
https://sourceforge.net/projects/ku...12-UNOFFICIAL-X01DB-user-release.zip/download
Click to expand...
Click to collapse
I tried pixel gsi but that didn't even reach bootanimation. Did you flash any additional patches?
Edit: I flashed permissiver and fix_zygote.

Thank you kuber and bauuua for your work for our device

Please make one too for X00RD. Plz ?

Need of Vendor For Android 10 OOS
Need vendor for android 10 Oxygen OS ...it's time you havent updated vendors Dev's...thanks in advance

Hi, @kubersharma. Sorry for the off-topic question but I have an Asus Zenfone 4 (ZE554KL) on which with the Oreo and Pie upgrade ASUS standardized BLOBs but does not created a dedicated vendor partition, so no official treble support. I wish I could flash the GSIs on it. The part of creating the vendor partition is no problem, but would you have any tips or tutorials on how to properly move the files from /system/vendor to /vendor in a functional way and the boot img hack needed to boot? Thank you very much!

does it work on android 10??

hi thank you for the rom. Can you make one for zs551kl(zenfone 4 pro) thank you very much

[MOD] [TESTING] Simple A-B MultiBoot

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
What is this?
this is a simple zip for A/B devices only that will separate the ROM in your current slot so that it won't interfere with the ROM in the opposite slot, which we'll call the primary ROM.
How does it work?
it modifies the fstab of the ROM in your current slot to have separate data and shared internal storage, data will be in /data/media/multiboot in the actual data partition.
What's the catch?
this of course comes with a few unsolvable issues such as:
1- SElinux must be permissive on the ROM you're multibooting (secondary ROM)
2- NO ENCRYPTION, do not use this on encrypted data, it will break everything.
3- don't use multiple users on the secondary ROM, it's unlikely to work (not tested)
4- Magisk modules exhibit weird behavior, such as modules from the primary ROM showing in the secondary, it is strongly recommended to use core only mode if you're using Magisk (only on the secondary ROM)
5- and most importantly, screen lock is likely to stop working on the primary ROM every time you switch and switch back, once you're back to the primary ROM, your PIN/pattern might not be recognized, same thing that happens some times when you restore the data partition, it's recommended to remove your screen lock before switching to the secondary ROM, or delete /data/system/locksettings.db once you're back.
6- and lastly, this is unlikely to work on stock/ported ROMs, not tested though, feel free to try.
and that's all OK, as this is intended for testing purposes only, maybe you want to test a new ROM or a GSI but don't want to commit to it yet, this doesn't mean you don't need to backup your data, this has only been confirmed working on ONE device, no guarantees it will work for you.
USAGE:
flash the secondary ROM normally (flash, switch slot, reboot recovery, gapps, magisk etc...)
flash this zip
flash Kernel Sepolicy Patcher and switch to permissive.

Working great on the Mi A2 booted MIUI and Evo without any issues!

Rexee said:
Working great on the Mi A2 booted MIUI and Evo without any issues!
Click to expand...
Click to collapse
which evo? pie or Q?

yayakuya said:
which evo? pie or Q?
Click to expand...
Click to collapse
Evo 3.2 Q

Rexee said:
Evo 3.2 Q
Click to expand...
Click to collapse
so it's possible to have pie & Q running?
that's awesome...
which ROM you have as primary?
I'm on Evox 3.2 also on my slot A
need a guide to get secondary ROM

Great tool, thanks for your hard work

Working on mi a2 lite with miui 12 port as primary and posp as secondary

Nebrassy said:
flash Kernel Sepolicy Patcher and switch to permissive.
Click to expand...
Click to collapse
Links is down. Error 404

Haldi4803 said:
Links is down. Error 404
Click to expand...
Click to collapse
https://zackptg5.com/downloads/archive/Kernel-Sepolicy-Patcher.zip

Hi!
How can I realize it on super partition with A11 ?
I guess, I need reassemble my super with needed system_b, vendor_b and product_b? something else?

[A11] [R] [ARM64] [A40] AndroidOpenSourceProject - AOSP - Vanilla - feel the pure Android

Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What is AOSP?
AOSP (Android Open Source Project) is Android just as Google publishes, without any other modifications or additions. More or less AOSP is the Pixel devices stock ROM without gapps and proprietary additions. Check out the screenshots to know more!
What's working?
Boots
RIL (Calls, SMS)
Mobile data
Bluetooth
WiFi/hotspot
Media (audio/video)
Camera
Camcorder
GPS
Fingerprint
NFC
Sensors
etc.
Bugs?
BT CALLS/voWiFi/voLTE
How to install?
Wipe system, data, dalvik's cache and cache Do not wipe vendor
TWRP:Install > select Image > select if they ask "system" select System and then the AOSP_A40......Image > install
Ofox: Tap on the Image > As system image
Reboot recovery
Flash Gapps
reboot system
Enjoy the goodness of Android 11.
Downloads
ROM: AOSP_VANILLA_STOCK_A40_R [Systemimage only]
Screenshots
Attachment
Sources
https://github.com/aosp-mirror
NOTE: For reporting any bugs, describe the issue properly and make sure to accompany it with a logcat. Without a logcat, bugs cannot and will not be fixed.
Don't forget to hit the thanks button to show love and support my work.​
XDAevDB Information
AOSP 11.0, ROM for the Samsung Galaxy A40
Contributors
Kevios12
Source Code: Kernel Tree
ROM OS Version: 11.0.0
ROM Kernel: Linux 4.x
ROM Firmware Required: OneUI 2.0 or ALT+F4
Based On: AOSP
Version Information
Status: Stable
Created 2021-04-30
Last Updated xxxx-xx-xx

(Based On: AOSP) Roms unfortunately do not have the option to make sim2 passive while sim1 is active (or vice versa). Is there a solution to this?

I have installed the ROM with TWRP and my phone is now bricked, I cannot even get into TWRP anymore. Any idea what I could do now?
- Install order was: Unlocked bootloader, used Odin to install TWRP, flashed Multidisabler, reboot, then followed the instructions here
- Black screen followed the "reboot" button in TWRP
- I can reboot the phone by pressing all three buttons but this will only give me the Samsung warning I have to confirm and then black screen again
- this phone uses Exynos CPUs
- OneUI 3.1 was installed before. Is that the issue? I read "Firmware required" as "Minimum Firmware required"...
Edit: I can NOT reboot the phone while a USB cable is plugged in.

Yes OneUI 2.0 is required. OneUI3 FW is GAY! And you can go instand to twrp by pressing power + vol - then if restart hold power+vol+ if samsung logo come, release powerbutton and wait. Have u the A40 for sure? the rom is testet and works, nobody has a brick or whatever. Flash This image as system_image only no wipe vendor or everything btw. look in other treads for my custom vendor it will works.

kevios12 said:
Yes OneUI 2.0 is required. OneUI3 FW is GAY!
Click to expand...
Click to collapse
So I managed to flash OneUI 2.0 and then repeated the whole process and now your ROM boots. I can't connect to WIFI though (yes I made sure I used the correct password). It just says "connecting failed". Also, when I call someone, there is no call window. Is this ROM compatible with FlameGApps?
Also, yes, definitely the A40.

only u can Try gapps idk if flame works. did u use WPA2/3? combinied

My router uses WPA2/3 combined and Android does not give me an option.

I was now able to connect to another Wifi and tried to update my apps. It tells me I had not enough space. But I have over 50 GB free.
Edit: So, the Wifi problem depends on encryption. WPA+WPA2 works, WPA2+WPA3 does not work. I think that is a bug.
Also, I cannot get Play Store to install anything. It always complains about not enough space despite me having no apps installed and lots of free space on both internal and external memory. Cleaning cache did not help. This happens with both NikGapps and FlameGApps. FlameGApps works way better though.

Also explaine better, it should work maybe bug of gapps

I tried the rom , but it’s stuck on the android logo , any help?

Have u installed vendor? ... the custom one

kevios12 said:
Also explaine better, it should work maybe bug of gapps
Click to expand...
Click to collapse
Possible, but I do not know. Might also be partitioning. I did nothing but flash ROM and flash Gapps, then boot and run through the Gapps initial setup tool that automatically started (connect wifi etc). Then I tried to install any app from the Play Store. It always says I need to free up space before I can install an app. But I have lots of space, tens of GB.

hmm thats weird

It is weird indeed... also, are there known issues with phone calls with a Bluetooth headset? I couldn't use mine today, even though it was properly connected.

kevios12 said:
Have u installed vendor? ... the custom one
Click to expand...
Click to collapse
I did

CozmoGM said:
I did
Click to expand...
Click to collapse
Nevermind , i think i did something wrong , but i reflashed the rom and everything and now it works.

Konzertheld said:
It is weird indeed... also, are there known issues with phone calls with a Bluetooth headset? I couldn't use mine today, even though it was properly connected.
Click to expand...
Click to collapse
known bug, like voLTE/voWIFI/BT CALLS BUG/EXYNOS WONT WORK

kevios12 said:
known bug
Click to expand...
Click to collapse
So... please put that in your description above instead of stating "bugs: none". Other ROMs named the bug with Bluetooth etc and yours didn't, so I assumed it was not relevant. I would not have downloaded it if I knew.

Konzertheld said:
So... please put that in your description above instead of stating "bugs: none". Other ROMs named the bug with Bluetooth etc and yours didn't, so I assumed it was not relevant. I would not have downloaded it if I knew.
Click to expand...
Click to collapse
Well the problem is when you are developer & tester at the same time, because nobody feels like doing it, or you really do everything alone ... mistakes can happen!

[Q][TREBLE VENDOR][J4CORELTE][PROJECT TREBLE VENDOR FOR J4CORELTE V2]

/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Hi everyone i want to share a gsi vendor image that boots most Q and P roms for the samsung galaxy j4 core.
How to install:
reboot to twrp go to format data type yes *this will format all your data*
go back to wipe and select system,vendor,cache,data and dalvik then swipe to wipe
go to install click on install image select the gsi image file then swipe to flash
now select install zip and click on the vendor image you have downloaded and swipe to flash
finally you can flash gapps if your gsi doesn't include them *note: if you dont have enough space to install gapps to to wipe select system and select repair or change file system click on resize system then swipe to reisze*
and if you are into rooting flash magisk zip file
note try to not install gsi roms that aren't over 1.2gb lineageos 17.1 and dotos are prefered
BUGS:
none
What works:
-boots
-offline charging
-sound
-wifi
-gps
-bluetooth
-mtp
-RIL
if you want to report a bug be sure to include logcat
After this thread started to gain downloads, i decided pushed another update with improved peformance!
Download:
V2 Google drive: https://drive.google.com/file/d/1z-OrGTjv9HD9SL2j30EYyUA__xjmhIaR/view?usp=sharing
V1 Google drive: https://drive.google.com/file/d/14-XNmD_19Mt-dFSReBZk8luoeY2ZoD9r/view?usp=sharing
Credits:
@leohiper10 for the sources and allowing me to use his vendor image from his lineageos 16 build (doesnt use his vendor build anymore with V2).
myself for taking my time to test and fix the bugs
XDA: DevDB Information
Fggevhy Vendor for galaxy j4 core
ROM OS Version: 10 Q
ROM Kernel: Linux 3.x
ROM Firmware Required: latest bootloader and dtbo
Based On: Project Treble
Version Information
Status: Stable
Current Stable Version: V2.0
Current Beta Version: V2.0
Stable Release Date: 2021-11-08
Created 2021-09-20
Last Updated 2021-11-08

happy flashing!

Forgot to mention that the gsi image must be arm Aonly i will add that later

Changelog: 08/11/2021
-.img format instead of flashable zip
-Set screen density to 411
-Fixed pretty much all bugs in the older release
-Fixed Unknown baseband bug and unkown imei with old version on j410f
-Better peformance!
Changelog: 22/10/2021
-baked custom kernel onto it
-fixed call audio
-fixed crashing issue of qcrilmsg (responsable for ril)
-fixed wifi issue on j410F
-fixed dual sim on J410F/DS

How u fixed call audio ?

I tried flashing lineage and aosp. With both after going through the process, when I reboot system in twrp, it always reboots to download mode.
Device model: sm-j410f

NsovoXD said:
I tried flashing lineage and aosp. With both after going through the process, when I reboot system in twrp, it always reboots to download mode.
Device model: sm-j410f
Click to expand...
Click to collapse
try with orangefox
also if you have issues flash the first release of the vendor then update to v2

Has anyone tried this /vendor with a Lineage 18.1 GSI? Asking for a friend.

LegoLivesMatter said:
Has anyone tried this /vendor with a Lineage 18.1 GSI? Asking for a friend.
Click to expand...
Click to collapse
should work!