Database Info

[ROM][6.0][UNOFFICIAL] CyanogenMod 13.0 | Skyrocket [12-17-16]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at any of us for messing up your device, we will laugh at you.
* Collectively, and at the same time.
*/
This is an unofficial CyanogenMod 13.0 Marshmallow ROM. This is currently a work-in-progress, so you can expect to run into problems while using it.
Working:
Modem / RIL
Data
WiFi
GPS
NFC
SD Card
Audio
Camera
Bluetooth
Sensors
Video
Issues:
You tell me
Credits:
CyanogenMod
Google / AOSP
CAF
sultanxda
And others
Downloads:
NOTE: You must virtually repartition your device, otherwise you cannot install this ROM! See the 2nd post for details.
ROM: https://www.androidfilehost.com/?w=files&flid=76548
Recommened GApps: http://opengapps.org (Stock or Aroma package recommended)
TWRP recovery updates*: https://androidfilehost.com/?w=files&flid=40575
View http://www.cmxlog.com/13/ for current changes.
Full changelog including device-specific changes can be found HERE.
*You must have completed the repartitioning process in order to install the TWRP recovery updates.
XDA:DevDB Information
[UNOFFICIAL] CyanogenMod 13.0, ROM for the AT&T Samsung Galaxy S II Skyrocket SGH-I727
Contributors
bryan2894
Source Code: http://github.com/bryan2894
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Latest Radio Firmware + Recovery
Version Information
Status: Stable
Created 2015-11-11
Last Updated 2016-12-17

Installation Instructions
NOTE: If you repartitioned your phone using a pit file, its recommended that you flash back the original unmodified pit to take full advantage of the increased space.
Latest official TWRP recovery: http://forum.xda-developers.com/showthread.php?t=1622917
Virtual Partition TWRP recovery
TWRP 3.0.2: https://www.androidfilehost.com/?fid=24545070682210374
From another non-virtual partitioned ROM:
Make sure you have the latest OFFICIAL TWRP installed.
Backup current ROM if desired
Back up EVERYTHING on your internal SD card to your computer (the internal SD card WILL BE ERASED in the next step).
In TWRP, go to Wipe -> Advanced Wipe -> check Internal Storage -> press on "Repair or Change File System" -> press on "Change File System" -> press on "EXT4", and then swipe to start formatting the internal SD card. This can take up to a minute.
Wipe Data, Cache and System.
Copy the newest version of my TWRP recovery to your device and flash it.
After that is finished, go back to the main menu, then go to Reboot and press on Recovery.
Once the device has rebooted back into TWRP recovery, goto mount then uncheck and recheck data.
Copy and flash the new ROM and your GApps package to your device and flash
Reboot system
Connect your phone to your computer and copy back your backed-up internal SD card data to the internal SD card.
Repartitioning is completed. Enjoy your 8GB of additional app storage space.
From CM12.1 or another virtual partitioned ROM:
Factory reset (to avoid problems)
Flash ROM and GApps
Updating to a newer version:
Just flash ROM and reboot.

Trying this tomorrow. Thank you

So I have to partition my phone to run this?

zappa41 said:
So I have to partition my phone to run this?
Click to expand...
Click to collapse
Yes virtual partition. Follow the instructions in the second post.
Sent from my LG-D851 using Tapatalk

bryan2894 said:
Yes virtual partition. Follow the instructions in the second post.
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
@bryan2894 - I appreciate all your hard work and really would like to help test this, but I can't realistically do so. My skyrocket is my daily driver, so I can't repartion to test this ROM, then repartition back to original to use my more-or-less stable Lollipop, the repartition to test the next version of your ROM, ... I do not think I can go back to another ROM after doing the virtual repartition, without undoing the virtual repartition each time, right? (I never tried Sultan's Lollipop with virtual re-partitioning, for much the same reason.)

@bryan2894 Tried installing twice last night,phone booted up too a screen talking about encryption error..cannot finish install. Says hit reset button at bottom of page to do a factory reset and try again. Hitting reset takes you back too recovery.

It failed to install twice for me

Got it to flash and boot up but wasn't able to flash 6.0 gapps in twrp it says no build.prop. tried micro and pico still no go. The rom was smooth just no gapps.

Great ROM so far. The only thing I can't get to work is calling someone. Every time it says Cellular network is unavailable. Any ideas how to fix

zappa41 said:
Great ROM so far. The only thing I can't get to work is calling someone. Every time it says Cellular network is unavailable. Any ideas how to fix
Click to expand...
Click to collapse
Read the OP. It says RIL isn't working right now.

zappa41 said:
Great ROM so far. The only thing I can't get to work is calling someone. Every time it says Cellular network is unavailable. Any ideas how to fix
Click to expand...
Click to collapse
Ok, I should have a fix for that next release.
Sent from my LG-D851 using Tapatalk

bryan2894 said:
Ok, I should have a fix for that next release.
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
Awesome,thank you bud. Not to be a pain but when is the next release? I love this ROM so far:thumbup:

Steveromingagain said:
@bryan2894 Tried installing twice last night,phone booted up too a screen talking about encryption error..cannot finish install. Says hit reset button at bottom of page to do a factory reset and try again. Hitting reset takes you back too recovery.
Click to expand...
Click to collapse
From another rom they had booting but then it would reboot at start up.
If you're getting a bootloop at the initial setup wizard
Remove this folder with TWRP:
/system/priv-app/com.qualcomm.location/

New build is up. The issue with receiving calls should be resolved

bryan2894 said:
New build is up. The issue with receiving calls should be resolved
Click to expand...
Click to collapse
Just flashed. Incoming calls works great. ROM is bitter smooth but, still can't make calls. Still says "mobile network unavailable". Anyway I can fix this myself?? Other than that, GREAT ROM!!

zappa41 said:
Just flashed. Incoming calls works great. ROM is bitter smooth but, still can't make calls. Still says "mobile network unavailable". Anyway I can fix this myself?? Other than that, GREAT ROM!!
Click to expand...
Click to collapse
I reset APNs and still can't make outgoing calls. Just letting you know. Other than that keep up the good work

I was searchin around my phone and I looked in sim info and I see that the "Cellular Network State" says its disconnected. What is this about,is this why I can't make phone calls? Thanks

@bryan2894 any luck on a fix for making calls

this rom is awesome!! smooth....and clean
two problems tho.. whan i try to change to preferrd network it stays on WCDMA preferrd.. cant change it to GSM or anything else for that metter.. and the secent problem is whan i go to the network operators its FC (the process com.android.phone has stoped)

[13/06/2020] Haky86's LineageOS 14.1 Huawei P8 Lite 2017 PRA-LX1

LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. Lineage OS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]P8 Lite 2017.
[*]P10 Lite.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
Emui 5.x B115 (Single Sim) or B170(Dual Sim)
How to Install the ROM?
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
Gapps:
http://opengapps.org
Working Hardware:
Audio.
Bluetooth.
Browser.
Display.
GPS.
Graphics: only gralloc.
Lights.
RIL.
Sensors.
Storage: both internal & external storage.
Wifi.
Bugs:
Tell me
LineageOS 14.1:
Downloads:
Checkout this
LineageOS 14.1 Downloads
Changelogs:
30/07/2017:
Initial build.
03/08/2017:
Testing hwcomposer, report us if the build boot and run games fine.
Camera will be fixed soon.
21/08/2017:
fix random reboot.
fix some tethering issues.
wifi should be fixed (send me a logcat if not work) it was working on my own pra-lx1..
25/08/2017:
fix sim.
fix hwcomposer (in theory, you should test games for that).
fix wifi..
01/09/2017:
ril has beeb fixed by disable flags for dual sim, my device is single sim.
fix wifi (will try to fix saving password issue).
01/09/2017:
Android 7.1.2 R29.
fix bootloop.
fix random reboot.
to fix lags: disable Ambient Display from Display settings.
15/11/2017:
update HwComposer according to this patch.
Update permissions for Google Play.
Build is smooth and fast even with enabled ambient display
21/12/2017:
fix minor bugs
31/12/2017:
fix camera
06/01/2018:
fix USB & memories.
21/01/2018:
Fix error 7 by adding support for prague devices, so you must flash my latest twrp, the v2.5.
Fix ril on prague devices.
Fix ril crashes, I test the automated voice of ussd code for more than 30 seconds and didn't crash like before.
Note: this rom is only for the Huawei P8 Lite 2017 if you didn't get worked audio or camera on your hi6250 device isn't my fault, just flash my own vendor.img from unbrick guide, that's why I get everything works on my pra-lx1 like the following attached screenshot.
25/01/2018:
Fix audio for P10 Lite
Add support for Vulkan libraries for all hi6250.
Fix camera on some prague devices.
31/01/2018:
Fix Magisk 15.3
Security patches: January 2018
19/02/2018:
security patches: Feb 2018
02/05/2018:
fix call's sensor issue.
latest android 7.1.2 build.
28/12/2019:
Fix Magisk
Fix RIL crash.
Security Patches: 5 Dec 2019
11/06/2020:
New "Extra" thanks to dady8889 for the base (I'll clean up tomorrow)
Fix Mute in Call.
SPL: May 2020
13/06/2020:
Fix Mute in Call.
Fix USSD. (thanks to flex1911 for his emui8 fixes)
Fix RIL Crash again.
[/HIDE]
Source Code:
Device Tree:
https://github.com/hak86/android_device_huawei_hi6250
Kernel GPL:
https://github.com/hak86/android_kernel_huawei_prague
Vendors:
https://github.com/hak86/android_vendor_huawei_hi6250
Credits
@haky 86
@Meticulus special thanks for immense work done in just few days for the hi6250 platform.
Contributors
@haky 86
Source Code: https://github.com/hak86
ROM Kernel: Linux 4.1.x
ROM Firmware Required: EMUI 5.0 or newer
Version Information
Status: Beta
Beta Release Date: 2017-07-30
Created 2017-07-30
Last Updated 2017-12-21

Reserved
ROM stuck at animation boot?
this because you must change the file system from F2FS to EXT4 to done boot process
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
I got error 7, how can I fix that?
* use my own TWRP recovery. or you can simply remove the whole assert line in the updater-script file inside the META-INF folder save and re-flash.
How can I fix RIL Crashes
flash root.
Copy the phone.prop into /system/vendor and /vendor.
reboot, now you should able to do calls for more than 2 minuts
Calls still crash even with fix SIM
Run adb shell and type the following command xxd /sys/firmware/devicetree/base/hisi,modem_id .
the result will be something like the following out ( for single sim devices):
1|hi6250:/ $ xxd /sys/firmware/devicetree/base/hisi,modem_id
00000000: xxxx x000 ;xx.
Click to expand...
Click to collapse
Search for your xxxxx000, and setup the following flags .
ro.config.client_number=1
ro.config.modem_number=1
persist.dsds.enabled=false
persist.radio.multisim.config=dsds (remove it properly)
for dual sim devices just edit these 2 flags:
ro.config.client_number=1
ro.config.modem_number=1
Save and reboot.

Oh, finally you did it
You can easy fix deep-sleep issue if you'll apply @XePeleato' patch for surfaceflinger , please take a look here , credit goes to @XePeleato !
Second, you can also easly fix the "reboot to erecovery" issue, by applaying my patch for kernel, you should take a look here as well !
I assume Hotspot isn't working, because you need more patches to kernel ... so you can cherry-pick almost all my commits, but as always you should keep authorship, as much as possible
About camera ?? - you can't enable camera so easy ... I'll let you to try , and if you do not succeed in a week, please let me to know and I'll help you
Good luck !

surdu_petru said:
Oh, finally you did it
You can easy fix deep-sleep issue if you'll apply @XePeleato' patch for surfaceflinger , please take a look here , credit goes to @XePeleato !
Second, you can also easly fix the "reboot to erecovery" issue, by applaying my patch for kernel, you should take a look here as well !
I assume Hotspot isn't working, because you need more patches to kernel ... so you can cherry-pick almost all my commits, but as always you should keep authorship, as much as possible
About camera ?? - you can't enable camera so easy ... I'll let you to try , and if you do not succeed in a week, please let me to know and I'll help you
Good luck !
Click to expand...
Click to collapse
Sure bro
I'm make a build right now with that patch, for camera I don't see USE_CAMERA_STUB := true in BoardConfig.mk and also my kernel source has 34 repos for external, are they useful? will do a test with them and report you..the rest are perfect

Installed, testing. No reboots so far.

Dejan Kruljac said:
Installed, testing. No reboots so far.
Click to expand...
Click to collapse
just wait and see..fixing are in progress..will be in nex builds. btw

This works on the P9 Lite 2017 too. The devices have the same hardware, I think even the same Model No. Just wanted to point that out.

Hi,
We have a P8 Lite 2017 and i have install LineageOS...
I have different problem.
The first problem is no sim accept. ( i have two sim in the phone but the Software marked "No sim"...
The second problem is when i shutdown P8 and stard after few minutes, the P8 doesnt start ( P8 blocked on the Logo Lineage OS).
You can help me ??
Thanks

maxilib said:
Hi,
We have a P8 Lite 2017 and i have install LineageOS...
I have different problem.
The first problem is no sim accept. ( i have two sim in the phone but the Software marked "No sim"...
The second problem is when i shutdown P8 and stard after few minutes, the P8 doesnt start ( P8 blocked on the Logo Lineage OS).
You can help me ??
Thanks
Click to expand...
Click to collapse
For sim I can't help you because my device is single sim.
for shutdown/random reboot, I already fix that problem, will be available in the second builld once fix nfc

haky 86 said:
For sim I can't help you because my device is single sim.
for shutdown/random reboot, I already fix that problem, will be available in the second builld once fix nfc
Click to expand...
Click to collapse
Thanks for your reply
I'v tested you version later. But for the SIM, any SIM is recognize in the system ! ( French SIM operator Orange)

I flashed the vendor, did a factory reset in twrp and wiped system, flashed rom zip and opengapps arm64 7.1 pico. it looped on a Lineage logo for 10 minutes. Do i need to format data partition? or factory reset is enough

aciupapa said:
I flashed the vendor, did a factory reset in twrp and wiped system, flashed rom zip and opengapps arm64 7.1 pico. it looped on a Lineage logo for 10 minutes. Do i need to format data partition? or factory reset is enough
Click to expand...
Click to collapse
Data needs to be wiped too everytime you flash a completely new ROM

Vinnipinni said:
Data needs to be wiped too everytime you flash a completely new ROM
Click to expand...
Click to collapse
so, factory reset from twrp is not enough and i need to choose "format data", the option above twrp slider yep?

aciupapa said:
so, factory reset from twrp is not enough and i need to choose "format data", the option above twrp slider yep?
Click to expand...
Click to collapse
Yes.

Vinnipinni said:
Yes.
Click to expand...
Click to collapse
OK, thanks. I'll back everything up and wait for next build

aciupapa said:
OK, thanks. I'll back everything up and wait for next build
Click to expand...
Click to collapse
Yeah. Just keep in mind that you cannot backup data at all. Only the Internal space with your PC. But always make backups of other stuff and keep at least one on your PC, so if something breaks, you can always go back. Data isn't that important to safe, if you wiped data, it's like a factory reset.

Please read the OP, of course you'll need to wipe data, cache, system.

haky 86 said:
Please read the OP, of course you'll need to wipe data, cache, system.
Click to expand...
Click to collapse
did that. still hangs on lineage bootanimation, waited for 10 mins or so

I don't quite understand how to patch the surfaceflinger. Can someone tell me what am I supposed to do?

First my respect. I also tried it. But I failed. Is not bad, there are experts like @haky 86. Great work, thank you.
When I tested the version for the 6x in the morning, I had to format between the data partition and re-install the EMUI. Since then your TWRP works perfectly. Complete backups include Data Partition. Restoring is also perfect. Tomorrow I want to try your Lineage OS. Hope the Revovery works there perfectly synonymous.

[ROM][7.1.2] AOSPA Paranoid v7.3.1 for Honor 6x

Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]All devices that use hi6250 chipset and use kernel 4.1.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
This ROM is provided by CodeOfHonor​
Installation Guide:
Make sure to the stock backup saved on pc, I'm not responsible for any bricked or damage.
Reboot to TWRP.
Go to Wipe.
Choose Advance Wipe.
Check on Data and change file system to EXT4, will not ever boot with F2FS.
Wipe cache, data, dalvik and system.
Flash the rom.
Reboot and have fun then.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
Dual sim might will not work all variants, so don't waste your time by asking me to fix it.
You don't like it?, easy revert to Emui 5.x.
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.
Source Code:
Device Tree:
https://github.com/codeofhonor-dev/android_device_huawei_hi6250
Kernel GPL:
https://github.com/codeofhonor-dev/android_kernel_huawei_hi6250
Vendors:
https://github.com/codeofhonor-dev/android_vendor_huawei_hi6250
XDA:DevDB Information
AOSPA Paranoid for Hi6250, ROM for the Honor 6X
Contributors
haky 86, HassanMirza01, felix-development
Source Code: https://github.com/codeofhonor-dev, Meticulus and the stuff of CodeOfHonor.
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emiui 5.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 7.3.1
Stable Release Date: 2018-04-27
Beta Release Date: 2018-04-27
Created 2018-04-27
Last Updated 2018-04-27

ROM stuck at animation boot?
this because you must change the file system from F2FS to EXT4 to done boot process
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
I got error 7, how can I fix that?
* use my own TWRP recovery. or you can simply remove the whole assert line in the updater-script file inside the META-INF folder save and re-flash.
How can I fix RIL Crashes
flash root.
Copy the phone.prop into /system/vendor and /vendor.
reboot, now you should able to do calls for more than 2 minuts
Calls still crash even with fix SIM
Run adb shell and type the following command xxd /sys/firmware/devicetree/base/hisi,modem_id .
the result will be something like the following out ( for single sim devices):
1|hi6250:/ $ xxd /sys/firmware/devicetree/base/hisi,modem_id
00000000: xxxx x000 ;xx.
Click to expand...
Click to collapse
Search for your xxxxx000, and setup the following flags .
ro.config.client_number=1
ro.config.modem_number=1
persist.dsds.enabled=false
persist.radio.multisim.config=dsds (remove it properly)
for dual sim devices just edit these 2 flags:
ro.config.client_number=1
ro.config.modem_number=1
Save and reboot.

I'm coming from EliteRom 7.5 and I love AOSPA but there are 2 little problems I have with this rom.
First of all fingerprint doesn't work correctly, no matter how often I press my finger on the sensor it stays at the ~10% mark.
The other problem is that I don't know how to root this rom. I tried installing magisk manager and flashing the zip but I get error 1 in TWRP.
Except this issues it's working very nicely on my device.
Thanks in advance for helping me out

MadMurl0c said:
I'm coming from EliteRom 7.5 and I love AOSPA but there are 2 little problems I have with this rom.
First of all fingerprint doesn't work correctly, no matter how often I press my finger on the sensor it stays at the ~10% mark.
The other problem is that I don't know how to root this rom. I tried installing magisk manager and flashing the zip but I get error 1 in TWRP.
Except this issues it's working very nicely on my device.
Thanks in advance for helping me out
Click to expand...
Click to collapse
10% mark?
Did you entirely remove all the fingerprints before flashing this Tom?
Go back to Elite or Stock, remove all fingerprints and reinstall the Rom
For Root, you can try changing recovery or using an older version of Magisk that worked for you

I am currently reverting back to stock and will try to flash the rom again, I guess I didn't remove the fingerprints before flashing.
I tried Magisk Version 15 and 16 which both worked on EliteRom, I even tried SuperSu which didn't gave me an error message in twrp but It didn't work tho. After flashing the zip there was no "SuperSu" App so I downloaded it from the playstore, the app told me "root not found". Do you know what the cause of this could be?
Edit: Fingerprints are working now But root still doesn't

After I downgrade from emui 8 to emui 5 in 5 minutes now I can fix this rom so expect a build within these days

hoping to try this rom , following for updates

Hey guys I just installed the rom, but I did notice that I don't have access to any Gapps. How to I install them? I'm using TWRP. I was just able to get my unlock code from Honor today, so I unlocked and rooted, and flashed your rom as the first thing, so I'm running a fresh flash of the latest version.

Flash package with Twrp: https://opengapps.org/

Thanks guys, I realized that yesterday right after I posted lol. So far I'm really loving the plain stock-ness of this rom, hopefully it give the device some more life so I won't have to upgrade soon.

MadMurl0c said:
I am currently reverting back to stock and will try to flash the rom again, I guess I didn't remove the fingerprints before flashing.
I tried Magisk Version 15 and 16 which both worked on EliteRom, I even tried SuperSu which didn't gave me an error message in twrp but It didn't work tho. After flashing the zip there was no "SuperSu" App so I downloaded it from the playstore, the app told me "root not found". Do you know what the cause of this could be?
Edit: Fingerprints are working now But root still doesn't
Click to expand...
Click to collapse
Yeah I'm having the same issue to, with no root.

Can someone tell me why this rom is different to all others ? Why is this one using stock vendor and can we easy revert to Emui ? Why don't all others ?
I'm on stock now.

How is the quality of the photos compared to stock rom? It is possible to install Emui camera or other huawei cameras?

** Note **
developments of hi6250 is end reason: switch to another phone, have phone.

** Note **
Developments for hi6250 has been resumed but just for this ROM, sorry for the inconvenience.
I'm already downloading the source for releasing new build but AOSPA will take a wile since have bigger source.

** Note **
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.

Had anyone tried installing Xposed yet?

Support BLL version? Honor 6X

The rom overall is great and smoorh, even F2FS works now
But somehow magisk still doesn't work. It says
Code:
! System installed root detected, mount rw :(
when I try to flash the magisk.zip file.

MadMurl0c said:
The rom overall is great and smoorh, even F2FS works now
But somehow magisk still doesn't work. It says
Code:
! System installed root detected, mount rw :(
when I try to flash the magisk.zip file.
Click to expand...
Click to collapse
Guys to flash magisk or superSU use Meticulus TWRP, other twrp like eliteTwrp show an error when it is recompilling the boot.img

LineageOS 14.1 for Samsung Galaxy Core Plus

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM/PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS
*/
Introduction
This is a UNOFFICIAL build of LineageOS for the Samsung Galaxy Core Plus.
It's not ready yet and has some bugs in it which could cause problems to some users.
The ROM will only work on the SM-G350 Version of the Phone (without any Numbers/Letters behind).
This ROM is not ready for daily use in all cases (look at the list of what doesn't work before flashing it).
Stuff that DOESN'T WORK
Video recording
Wi-Fi tethering
USB tethering
Probably some other stuff
Stuff that WASN'T TESTED
EMERGENCY CALLS
Bluetooth tethering
Installation Instructions
Special thanks to @Giovix92 for making this tutorial!
Requirements:
1: A computer with Windows.
2: An Internet connection.
3: A backup of your phone data (contacts, photo, music, videos, and other).
4: About 400 MB free space on your SD card.
5: Phone charged at least 80%.
Download links are below
I do NOT take any responsibility for bricked devices!
Let's start!
1: Download the Samsung USB Drivers.
2: Download the ODIN3. (Only for Windows)
3: Download the TWRP Odin package to your desktop and download the LineageOS 14.1 zip to your SD card.
4: Make a backup of your files, because the storage will be wiped. (External SD card will not be wiped)
5: Reboot your phone in to the Download mode (Volume Down- , Home- and Power button). Press the Volume Up button when asked. Then open the ODIN3 and connect your phone to your PC.
6: Press AP and choose the TWRP Odin package (recovery.tar) and make sure re-partition is NOT ticked. "Auto-Reboot" should not be ticked either, otherwise you will need to be quick to boot into the recovery immediately after flashing.
7: Press start! Wait a few seconds. Then your phone will be rebooted. Now you can disconnect the cable and power off your phone.
8: Boot your phone in to the TWRP Recovery (Volume Up-, Home- and Power button).
9: Go to Wipe, and Swipe to Factory Reset.
10. After wiping go to the home screen by pressing the home button.
11: Go to Install. Choose the "external_sd" from the top bar. (It says "Storage: Internal Storage (xxxxMB)" by default)
12: Choose the LineageOS 14.1 ZIP and Swipe to Confirm Flash. Make sure you don't power off while flashing!
13: After the zip has been flashed choose "Reboot System".
14: Wait 5-15 minutes to boot the phone. If the phone keeps booting take out the battery and do a Factory Reset again.
15: When the phone boots the first time, go through the Setup Wizard and you are ready to use your phone!
If there was something you didn't understand, please don't hesitate to ask
Changelog
2022-04-03:
Update Chromium WebView to 99.0.4844.73
Emulate missing sdiv/udiv instructions
2022-02-13:
Fix playing audio and system sounds
Fix offline charging
Update Chromium WebView to 97.0.4692.98
Removed the custom wpa_supplicant.conf file (this may solve the issues with some users not having Wi-Fi without deleting that file first)
2018-05-28:
Initial release
Downloads
Samsung USB Drivers
Odin v3.13.1
TWRP 3
lineage-14.1-20220403-UNOFFICIAL-cs02.zip
Source
Device tree
Kernel tree
Proprietary files
WebView
Thanks To/Credits
Thanks to ...
... androidlover5842, ishantvivek, SandPox, ZIM555 and everyone else working on Samsung's hawaii-Boards
... berkantkz and santeri3700 for teaching me the basics of ROM developing and their work on the SM-G350

The video codex work ?

HiR3x said:
The video codex work ?
Click to expand...
Click to collapse
No. Check the OP for what's working and what isn't.

Update?
A lineage 14 for the core plus?Amazing
Is possible to install(maybe ota updates) this rom from the older one (lineage 13)?

KevinSmith21 said:
A lineage 14 for the core plus?Amazing
Is possible to install(maybe ota updates) this rom from the older one (lineage 13)?
Click to expand...
Click to collapse
I didn't try it, but it should work (no guarantees though, I'm not responsible for any data loss). Make sure to do a backup anyways.

TimSchumi said:
I didn't try it, but it should work (no guarantees though, I'm not responsible for any data loss). Make sure to do a backup anyways.
Click to expand...
Click to collapse
Got it,thanks for the rom

The rom its super smoth and its mutch bater then LineageOS 13 but wifi dont work i dont know way

HiR3x said:
The rom its super smoth and its mutch bater then LineageOS 13 but wifi dont work i dont know way
Click to expand...
Click to collapse
Wi-Fi works for me out of the box. I guess you could try what people in the LineageOS 13.0 thread already tried and delete the wpa_supplicant.conf file (I think it is located in /data/misc/wifi/).

Very good rom, congrats @TimSchumi !

I just noticed that there is an incompatibility with GApps packages. If you flashed GApps and now your Keyboard constantly crashed, simply delete /system/lib/libjni_latinimegoogle.so from TWRP (make sure to mount /system first). I'll include the fix in the next build (whenever that may be).

SIM
For me everything is good but SIM card is not detected
Bt, wifi, flshlight, photos with flash... Only video recording and codecs...
It's fine when I can play music but not necessarily

Excellent
Great ROM for the old phone!
And with SD card as internal memory gives plenty of space for apps! Now the phone is usable again after cyanogenmod 13 before.

akagisan said:
Great ROM for the old phone!
And with SD card as internal memory gives plenty of space for apps! Now the phone is usable again after cyanogenmod 13 before.
Click to expand...
Click to collapse
Was LineageOS 13.0 really _that_ unusable? I assumed that the bugs that 14.1 has right now would be a huge deal breaker. Also, that SD-Card as Internal storage thing is just one buggy mess. Don't use it.

Hallo,
great work so far .
Any chance that it becomes official in foreseeable future?

PackElend said:
Hallo,
great work so far .
Any chance that it becomes official in foreseeable future?
Click to expand...
Click to collapse
It will probably never be official. There are a lot of serious bugs, my testing device is currently out of commission, the "official" 14.1 cycle won't last mich longer and I suspect that (if I manage to fix the previously mentioned bugs) the codecs are again near unfixable.

TimSchumi said:
the codecs are again near unfixable.
Click to expand...
Click to collapse
Sad to hear that switching to 15.1 isn't an option?

TimSchumi said:
It will probably never be official. There are a lot of serious bugs, my testing device is currently out of commission, the "official" 14.1 cycle won't last mich longer and I suspect that (if I manage to fix the previously mentioned bugs) the codecs are again near unfixable.
Click to expand...
Click to collapse
Well...every app with build-in(i think) codecs like VLC or mx player work...but can't watch memes on other apps:silly:

I installed this rom, its amazing way better than Lineage OS 13 However , when i play a youtube video it dosen't play at all but when i play a video in chrome it plays it completely fine
Any Fixes?

Apher said:
I installed this rom, its amazing way better than Lineage OS 13 However , when i play a youtube video it dosen't play at all but when i play a video in chrome it plays it completely fine
Any Fixes?
Click to expand...
Click to collapse
It seems that video codecs are buggy...for yt videos i download them and watch them with vlc(or any other app with integrated codecs)

Is there to fix that if the phone gets discharged to 0% it gets bricked?

[ROM][5.1.1][SM-J100H] CyanogenMod 12.1 for Samsung Galaxy SM-J100H

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Wifi (connection, tethering, etc)
Bluetooth (need quick patches in download link)
Camera, video codecs
RIL (Calls, SMS, mobile data)
Storage (both internal and external)
MTP storage (both internal and external)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Sound recording
Torch (flashlight)
BUGS/Not working:
Laggy recorded videos. In this case, use MX Player, choose SW codecs when you play these videos, they will become normal
Switching to other fonts will get bootloops after restart. In this case, if you use TWRP recovery, go to File Manager >> delete "themes" from /data/system would help you escape this without factory reset
First time installing CyanogenMod 12.1 to your Galaxy , or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended)
Quote:
DOWNLOADS:
ROM: Link
CHANGELOG
Code:
- 2016/06/25
+ Initial release, ported from Galaxy V's CM12.1
- 2016/06/27
+ Switched to built-from-source, no more portings
+ Fixed nearly all problem, except fonts
+ Underclocked to 1,2GHz for stable usage
+ Enable multi-threaded dex2oat >> Faster app installation
+ Fixed installation for some apps (FB, etc...)
Want some screenies? Get them from Screenshot tab
XDAevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy
Contributors
Erwin Abs
Source Code: https://github.com/jnkcode/android_kernel_samsung_j13g/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2016-06-27

???

always says SETUP WIZARD HAS STOPPED

- works stable
- issues with WiFi and Bluetooth. WiFi cannot connect - you have to enter the same password multiple times when connecting for the first time. Then it keeps failing to connect from time to time
- more laggy than stock rom and resurrection remix
- installation is very straightforward
Thanks for sharing this rom. Lots of good work.

Lord87 said:
- works stable
- issues with WiFi and Bluetooth. WiFi cannot connect - you have to enter the same password multiple times when connecting for the first time. Then it keeps failing to connect from time to time
- more laggy than stock rom and resurrection remix
- installation is very straightforward
Thanks for sharing this rom. Lots of good work.
Click to expand...
Click to collapse
Try this https://androidfilehost.com/user/?w=settings-dev-files&flid=205876

CyanogenMod 12.1 for SM-J100H with dual SIMs
Thanks for posting this ROM, gave me a chance to test in on a SM-J100H with dual sims: flashed the ROM, the fix and then gapps. Was thinking not to have gapps but an app was requiring Google Play services.
Setup Wizard stopped several times after reboot, worked around it by restarting the phone. Mobile connection was unstable for both sims and kept dropping, overall performance was slow, especially when in Settings. Not sure if RAM on this phones can be upgraded, mentioning it since free memory was scarce.
As noted by another user WIFI setup had to be repeated for it to stick, good work for keeping it simple thu.

c0mpus3rvef said:
Thanks for posting this ROM, gave me a chance to test in on a SM-J100H with dual sims: flashed the ROM, the fix and then gapps. Was thinking not to have gapps but an app was requiring Google Play services.
Setup Wizard stopped several times after reboot, worked around it by restarting the phone. Mobile connection was unstable for both sims and kept dropping, overall performance was slow, especially when in Settings. Not sure if RAM on this phones can be upgraded, mentioning it since free memory was scarce.
As noted by another user WIFI setup had to be repeated for it to stick, good work for keeping it simple thu.
Click to expand...
Click to collapse
yeah i think ram 512 for now is not good especially with gapps that are constantly updating, i think you should buy a new handphone
Let's go join to Redmi 5A

Erwin Abs said:
yeah i think ram 512 for now is not good especially with gapps that are constantly updating, i think you should buy a new handphone
Let's go join to Redmi 5A
Click to expand...
Click to collapse
Totally agreed, it has limitations due to small RAM and older technology. am using my SM-J100H learning about behavior of various custom ROMs. Please bear with me, one observation when using Bluetooth, it said SM-G360H, perhaps not significant. was able to transfer files and use an app that required Bluetooth connection. Just curious if this could cause slow response time. Thanks again.

c0mpus3rvef said:
Totally agreed, it has limitations due to small RAM and older technology. am using my SM-J100H learning about behavior of various custom ROMs. Please bear with me, one observation when using Bluetooth, it said SM-G360H, perhaps not significant. was able to transfer files and use an app that required Bluetooth connection. Just curious if this could cause slow response time. Thanks again.
Click to expand...
Click to collapse
Will it work with the Sm-j100FN?

ugur30 said:
Will it work with the Sm-j100FN?
Click to expand...
Click to collapse
totally different hardware so NOPE

Donwload

Erwin Abs said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Wifi (connection, tethering, etc)
Bluetooth (need quick patches in download link)
Camera, video codecs
RIL (Calls, SMS, mobile data)
Storage (both internal and external)
MTP storage (both internal and external)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Sound recording
Torch (flashlight)
BUGS/Not working:
Laggy recorded videos. In this case, use MX Player, choose SW codecs when you play these videos, they will become normal
Switching to other fonts will get bootloops after restart. In this case, if you use TWRP recovery, go to File Manager >> delete "themes" from /data/system would help you escape this without factory reset
First time installing CyanogenMod 12.1 to your Galaxy , or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended)
Quote:
DOWNLOADS:
ROM: Link
CHANGELOG
Code:
- 2016/06/25
+ Initial release, ported from Galaxy V's CM12.1
- 2016/06/27
+ Switched to built-from-source, no more portings
+ Fixed nearly all problem, except fonts
+ Underclocked to 1,2GHz for stable usage
+ Enable multi-threaded dex2oat >> Faster app installation
+ Fixed installation for some apps (FB, etc...)
Want some screenies? Get them from Screenshot tab
XDAevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy
Contributors
Erwin Abs
Source Code: https://github.com/jnkcode/android_kernel_samsung_j13g/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2016-06-27
Click to expand...
Click to collapse
A Bugs / Or My phone?
Device : J100H
Bugs (maybe) : Cant Connect To A Wifi (It Saying Cant Connect On This Network)
I Dont Know Its My Phone Or The ROM Sooo? Help

1.Thank You For The Information
2. I Already Know It,After Installing Lineage OS 14.1 (Nougat,Still Didn't Know IS THe ROM Ported Or Not But THe Wifi Works So I Used It (And Installing Family Link Bc That Phone I Will GIve It To My Lil Bro)
3.It Slow af