Hi i have an problem with an Idol3, i started flashing him with Panasonic Eluga Switch software but i unplugged it BEFORE i get the error (i waited 10 min after being stucked at 45%), so idol 3 is locked on Android power screen and when i launch the Panasonic soft in download mode , it give me an error at 2% error 40011 'check driver or handset', i executed the software as both admin and normal user but i didn't worked. Its not my phone and i'm helping a friend through TeamViewer, and he doesnt have another computer to test and i don't want him pay for that. So it would be cool if someone give me a possible solution. Thanks
Issou said:
Hi i have an problem with an Idol3, i started flashing him with Panasonic Eluga Switch software but i unplugged it BEFORE i get the error (i waited 10 min after being stucked at 45%), so idol 3 is locked on Android power screen and when i launch the Panasonic soft in download mode , it give me an error at 2% error 40011 'check driver or handset', i executed the software as both admin and normal user but i didn't worked. Its not my phone and i'm helping a friend through TeamViewer, and he doesnt have another computer to test and i don't want him pay for that. So it would be cool if someone give me a possible solution. Thanks
Click to expand...
Click to collapse
Try to install drivers and then try with panasonic....
My phone leeco le 1s is stuck on boot loop because when i tried to flash twrp with flashify app maybe it didn't and so my phone was stuck in boot loop with no recovery:crying:
I've tried SP flash tools but it gives error that device disconnected maybe because battery isn't charging as while flashing the official stock recovery with adb it shows the device has low battery. I tried to charge it for 4 hours but no result and i can't even open it take out its battery and charge.
My phone is rooted and in bootloop it shows:
'Orange state
Your device is unlocked and can't be trusted
Your device will boot in 5 seconds'
I tried to relock the bootloader with fastboot but it gave error 'fastboot oem lock failed'
Is there anyway to remove this message because I suppose my phone will not be repaired if this message shows up at service center (My phone is still under warranty).I also have a GPS problem with my phone and as many other users had charging problem this also maybe the one.
So how can i fix the bootloop or can i fix the message and i please need help sooon because only 2 months for warranty left:crying:
Hi !
Charge your battery for several hours and try again , that flash tool won`t let you use it until is 70% or so
There is no guarantee that it will work , some partitions may have got corrupted on the attempt of flashing the recovery , you may end up going to a service center
Start by having a look at this thread https://forum.xda-developers.com/leeco-le-1s/how-to/letv-1s-x500-red-light-brick-t3481265
Also you may search for help here as well
Good luck !
Hi, there
I have a problem with my Nokia 3 TA-1020 wich is dead after trying to recover it with factory firmware using TWRP, the phone has already an unlocked bootloader, but since that i can not run the phone, that only vibrating each 5-10 seconds with a black screen and no sign of charging batterie, can any one help me with this issues?
i've tried all post on internet to flash it with SP Tools without success.
Thanks All
:crying::crying::fingers-crossed::fingers-crossed:Help me Please!! I have Sm-j610 (J6 plus)
Initially my phone was stuck at ""sw rev check fail system fused 4 binary 3"" error due to flashing of an incorrect root file [J610FXXU1ARJ3_boot_8.1.0_AndroDef_Patch_v1] .So i tried to download its official firmware to fix it again with same baseband version (U4) and i did by odin but failed in the middle of the process and my Phone ended up showing
"An Error has occurred while updating software. Use Emergency recovery function in Smart Switch PC software""
1.But this is not the real problem,,the real problem is that this screen disappears and appears again and again when i insert phone to ODIN and it shows Added/Removed Added/Removed and keeps doing this..
2.When i take it to download mode by holding Vol"+" and"-" then inserting usb then it goes to download mode (i do by this method because its power button has stopped working due to this problem i.e phone does not power on) but again disappears instantly and repeats same problem as i told in 1st para
3. It does connect to smart mobile or odin but for 1 second...Please Help ME!! So that i can flash it again or whatever as it is bricked right now
Remove battery and then try to flash
Sent from my Redmi K20 Pro using Tapatalk
itspdp said:
Remove battery and then try to flash
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
Bro,,My phone's battery is unremovable..
Should i still do that (by screwdriver)???? Any other way?? if not then i will do it...I cant buy new phone..
-flash the wrong twrp in recovery
-phone boot loop
-every 5 seconds phone will restart
-cant turn it off except waiting it to drained its battery or unplug the battery from the inside(don't have tools can't do it)
-cant go to bootloader
-BUT it kinda respond to power + up it made the logo blinked instead of vibrating and reboot if keep doing that the logo is just gonna blink
-can the orange state be remove?
-wont respond to any input other than "power + up"
-tried flashing but CANCEL CUZ IT REBOOT
-for me it's theoretically impossible is there a way to force it into bootloader without doing inputs cuz I can flash rom during it's black screen phase
use sp flash tool and flash stock boot.img
is there a website where we can find stock roms? I bricked my phone trying to install the wrong twrp for infinix hot 11s nfc. Thanks.
Does somebody have the stock rom for Infinix Hot 10 Play X688B?
There is the builder number X688B-H659ABCEFGHI-Q-GL-220109V524
django123321 said:
is there a website where we can find stock roms? I bricked my phone trying to install the wrong twrp for infinix hot 11s nfc. Thanks.
Click to expand...
Click to collapse
Download Infinix Stock ROM for all models (Latest Firmware)
Download the latest Infinix Stock ROM Firmware (Flash File) for all the available Infinix smartphones, feature phones, and tablets.
androidmtk.com
Also posted this link to another thread. Not sure about the legitimacy, but this is the only site I could find with XOS roms. Some xda forums has some stock images but they are way older.
I got working solution same as you. If you still can't fix it. Let me know i have the solution.
boomzkik said:
I got working solution same as you. If you still can't fix it. Let me know i have the solution.
Click to expand...
Click to collapse
Hey could you send it to me? I’m having this problem too
Hammy69 said:
Hey could you send it to me? I’m having this problem too
Click to expand...
Click to collapse
Hi follow this steps.
1st - go here and setup this one https://github.com/MTK-bypass/bypass_utility and download also the exploits_collection
2nd - after installing those tools I mention, power off the android device
3rd - run the main.py python on cmd
4th connect your android device on your laptop and wait for it to bypass the mtk
5th - download the official firmware of infinix hot 10 compatible with your device
6th - download spflash tool and flash it and voila your phone will be alive again
let me know if you still have question or if you can't reproduce it.
boomzkik said:
Hi follow this steps.
1st - go here and setup this one https://github.com/MTK-bypass/bypass_utility and download also the exploits_collection
2nd - after installing those tools I mention, power off the android device
3rd - run the main.py python on cmd
4th connect your android device on your laptop and wait for it to bypass the mtk
5th - download the official firmware of infinix hot 10 compatible with your device
6th - download spflash tool and flash it and voila your phone will be alive again
let me know if you still have question or if you can't reproduce it.
Click to expand...
Click to collapse
Hey i did all the steps but i get this problem. I uninstalled and reinstalled UsbDk but it still doesn't work.
Code:
[2022-04-10 01:49:37.392714] Waiting for device
[2022-04-10 01:49:37.393861] Found device = 0e8d:2000
Traceback (most recent call last):
File "C:\Users\eaman\src\device.py", line 84, in find
self.configuration = self.udev.get_active_configuration()
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\core.py", line 921, in get_active_configuration
return self._ctx.get_active_configuration(self)
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\core.py", line 113, in wrapper
return f(self, *args, **kwargs)
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\core.py", line 249, in get_active_configuration
self.managed_open()
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\core.py", line 113, in wrapper
return f(self, *args, **kwargs)
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\core.py", line 131, in managed_open
self.handle = self.backend.open_device(self.dev)
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\backend\libusb1.py", line 804, in open_device
return _DeviceHandle(dev)
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\backend\libusb1.py", line 652, in __init__
_check(_lib.libusb_open(self.devid, byref(self.handle)))
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\backend\libusb1.py", line 604, in _check
raise USBError(_strerror(ret), ret, _libusb_errno[ret])
usb.core.USBError: [Errno None] Other error
boomzkik said:
Hi follow this steps.
1st - go here and setup this one https://github.com/MTK-bypass/bypass_utility and download also the exploits_collection
2nd - after installing those tools I mention, power off the android device
3rd - run the main.py python on cmd
4th connect your android device on your laptop and wait for it to bypass the mtk
5th - download the official firmware of infinix hot 10 compatible with your device
6th - download spflash tool and flash it and voila your phone will be alive again
let me know if you still have question or if you can't reproduce it.
Click to expand...
Click to collapse
Hey man! I was having the same issue with my Infinix Hot 10s x689B since yesterday. I tried to flash orange fox custom recovery and now my phone is constantly getting restarted to the infinix title screen in a loop. I followed ur instructions to the 4th point. Now my phone has stopped the "boot loop" thing. What to do now? How can I flash the official firmware? If I try to boot the device again, the loop resumes. Can you please help me?