Database Info

dead bootloader what to do next

I've got a dead bootloader. My device doesn't upgrade thru SD and not with USB. can somebody please help me because i realy don't know what to do. My device is dead for almost 3 weeks now
[edit]
Even my backup on SD doesn't load. And this happend after i downgrade the radio version of the well know greek rom
[/edit]

nobody?
Is there a solution to flash only the bootloader?

I think you need to add some more info, if anyone should have a chance to help. For example what happened when it died - how and why? What happens if you remove the battery cover, replaces it and turns on the device? Text on screen, like USB or Serial? Have you tried uploading ROM from different PCs?
The more info you provide, the more likely it is that someone recognizes your situation from own experience and can provide some help.

HBK said:
I think you need to add some more info, if anyone should have a chance to help. For example what happened when it died - how and why? What happens if you remove the battery cover, replaces it and turns on the device? Text on screen, like USB or Serial? Have you tried uploading ROM from different PCs?
The more info you provide, the more likely it is that someone recognizes your situation from own experience and can provide some help.
Click to expand...
Click to collapse
You are totaly right.
I have update my frvice with the wrong greek rom and now i have the 15 sec reboot thing.
When I startup my device he ends up the bootloader and the only way to get the device booting to windows is remove the battery cover. But the her reboots again after the 15 seconds.
In the bootloader i tried to load my backup with the SD card but nothing happens. I also tried to load a ROM with MaUpgradeUt_NoID but nothing happens. I only get empty version thing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If i use the regular MaUpgradeUt and change the file change.bat for the xda3nbftool I get a error "error 201: get device data error".
I also tried to backup my device with the wrong ROM on it, to look at the header but nothing happens (romupdate.exe).
So my conclusion is that my bootloader is dead. Please correct me when i'm wrong but if this is the case how can i correct my bootloader.

When you unplug your Magician from the USB cable, what do you see?
If you see (with the backlight OFF) "Serial v1.00" or similar, thats a WORKING bootloader.
Make sure you have Active Sync DISABLED (right click the taskbar icon, click "Connection Settings..." the uncheck "Available by USB".
You should then plug in the USB cable and it should change to "USB v1.00" or similar.
Your PC may detect the connection as new hardware - that is a good sign that you have Active Sync disabled.
Let the New Hardware Wizard do it's thing, then re-run the upgrade setup and it should work.
If not, you've got BIG problems.

guess I'm in big trouble
The only thing i can do, is trying a different pc without ASync. On the current pc i'm working on, USB in activesync is disabled.
Are there any posibilties to reload (rebuilt, update) Bootloader.
Can somebody please help me.

The bootloader is built in as it's own ROM, and I've never seen a utility that can make it writeable. I doubt you've destroyed your bootloader, but that doesn't help you - sounds like you'll have to bite the bullet, act dumber than you are, and return it to the manufacturer for a repair - and probably pay for the privilege.

KevinL said:
The bootloader is built in as it's own ROM, and I've never seen a utility that can make it writeable. I doubt you've destroyed your bootloader, but that doesn't help you - sounds like you'll have to bite the bullet, act dumber than you are, and return it to the manufacturer for a repair - and probably pay for the privilege.
Click to expand...
Click to collapse
:shock:
But isn't it strange that if you can't destroy it, it doesn't work anymore? And isn't there somebody who had the same problem?

Before you give up, try this:
Try using another USB cable.
I have experimented many times to realise that the upgrading process does require matching with the right cable.

I noticed that in the screenshot you posted, there is no info on what the device will be upgrade to! I could be wrong, but this may well mean that your device is incompatible with the ROM you are trying to upload.
Try downloading another ROM and give it a go. The best thing would be, if you can find one made specifically for your brand, ie Qtek, I-mate or whatever, and DON'T patch it. Just let the original installer do the job...

Talents said:
Before you give up, try this:
Try using another USB cable.
I have experimented many times to realise that the upgrading process does require matching with the right cable.
Click to expand...
Click to collapse
I'm using the cable that came with my device so that can't be wrong. But i could give it a try.
HBK said:
I noticed that in the screenshot you posted, there is no info on what the device will be upgrade to! I could be wrong, but this may well mean that your device is incompatible with the ROM you are trying to upload.
Try downloading another ROM and give it a go. The best thing would be, if you can find one made specifically for your brand, ie Qtek, I-mate or whatever, and DON'T patch it. Just let the original installer do the job...
Click to expand...
Click to collapse
There isn't a orignal rom fot the dutch T-mobile MDA. And if you use a original installer, it uses ActiveSync. And i can't boot windows because it restarts after 15 seconds so I can't use ActiveSync.

Why can't you use an original ROM updater, if you have the Greek resetting ROM installed? I believe a lot of us has done so without any problems, including me. I don't remember precisely what I did, but it was no problem whatsoever. Most likely I just entered bootloader mode first, to keep the Magician from resetting...

HBK said:
Why can't you use an original ROM updater, if you have the Greek resetting ROM installed? I believe a lot of us has done so without any problems, including me. I don't remember precisely what I did, but it was no problem whatsoever. Most likely I just entered bootloader mode first, to keep the Magician from resetting...
Click to expand...
Click to collapse
I really tried everything but without any results. I realy don't know why i can't use the original ROM updater.

I have the similar problem, but mine one doesnt even start windows. It always go into the bootloader mode and stays there. I try upgrading it, but it gives me communication errors.

Do this
This is what you do.
Disconnect your JAm from USB
Go from your PC , ACTIVESYNC > FILE > CONNECTION SETTINGS > remove the check mark for ALLOW USB CONNECTION TO THIS DESKTOP COMPUTER
Now connect your JAM to your PC again via USB, this time active sync should not start since you have disabled USB
Now double click on the installer file of the original ROM and you should be good to go
After Reset , enable USB ,
Go from your PC , ACTIVESYNC > FILE > CONNECTION SETTINGS > Put a check mark for ALLOW USB CONNECTION TO THIS DESKTOP COMPUTER

MDA dead
I have tried.... it's not responsing as it should be.

[Q] Is my Galaxy S i9000 Bricked?

Okay so i had my phone rooted for fun and had no original purpose of installing CM7 on it before i read about a thread that displayed that it was a safe method to do according to what was wroten.
The phone (Galaxy S i9000) 2.2.1 Android was however, what i think is "bricked".
The phone starts with a simple picture showing me a phone with a dot-frame going to a triangle (warning sign) and further to a computer screen. Does this mean that the phone is bricked or is this something else?
The phone does not respond to:
Adb (android-sdk) throught CMD (windows 7 32 bit)
Kies
Odin
Droid Explorer
Android Control 1.3
The phone was originally modified with Odin 1.7 and failed after pushing the ROM into the phone. According to what i did, i did everything correct according to what was written in the explenation.
Please answer as quick as possible, otherwise i will try to get out the warranty which i doesn't even have anymore.

This screen means in fact that you are "nearly bricked" but some kind of emergency system is running what should act like the download mode (as I know it from my SGT). I had similar problem and after a bunch of work I found out that it was the USB driver from Samsung. A simple click in the Samsung Kies Software to re-install drivers helped me and I was able to normally flash a new Kernel, Rom, whatever. I guess you have a sync software as well (as well Kies?!), or try uninstalling drivers manually. Might work. May be worth a try.
Edit: Even with broken drivers it seemed that it was working with Kies... sync (with comlications, broke my calendar app after restarting tab after sync), storage mode, everything but no adb and such.
Sent from my GT-P1000 using XDA App

I know tried to:
Re-install Kies completelly
Removed drivers (manually)
Turned of the phone: ripped the battery out
Put it back in
Re-installed Kies (no phone connected)
Kies 2.0 Successfully installed
Re-install drivers throught kies
Checked that the phone was off and repeated step: 3
Put the usb cable in and begged to the god of nerds
Profit? No...
Kies didn't even find any device that it could try to connect to. Neither did any of above written softwares. The pc cant communicate with the phone.
Tried: 3-button-combo: lots of times!!
Adb prints: No device found
Odin: No device
Kies: No device
DroidExplorer: No device
Note that i live in Europe.

Guess you have a nice 450€ brick then... but as I am more a semi-noob than a semi-pro I am not qualified to tell you this as a shure fact... just an opinion...
send from my SGT with Overcome...

I contacted the company that sold my phone, got the number for Samsung Support, they redirected me to the company "Mobilbyrån" which will re-install and make sure my phone starts working as usual for 45 £. All thought i could done it with a jig on my own, but i rather trust a professional company to do this for me in exchange for my warranty (billing only guilty if warranty denied).
According to "Mobilbyrån" or translated "Phone Agency" this is a ordinary errand and that it's highly possible that this will go on my warranty that is still guilty for atleast 8 more months.
Solution for my problem would be to:
1. Build a Jig to hardware boot the phone into download mode
2. Enter Odin and push a new rom inside (preferebly a stock (android))
3. flash kernel (could be done before 2?)
4. Profit

I guess there is no way, even for Samsung, to find out if there was a third party Rom etc is installed as device refuses to do anything. You are only f*** up if they are still able to read out current data somehow... but 45£ is really a fair deal...
send from my SGT with Overcome...

Sucks to hear that about your phone. I have a similar model and I managed to CM7 working. I followed a tutorial on this website and I semi-bricked it too at first although I've never had the same problem as you regarding Odin not being able to locate the phone.
Can you tell me the steps you took in trying to flash CM7 on it?

Also, refer to this topic to see if it can be of any help: clicky

It was when i were to use Odin the second time.
I managed to flash the speedmod kernel into the original Android ROM (stock). I also managed to install one of the zips that were to be installed throught recovery. But after this (when connecting to Odin) and this was the step where only one of the checkboxes (F.Reset Time i think).
So i made this and the Odin 1.7 told me: "Failed" or such. And i then got paniced, i disconnected the phone since i was so frightened something had gone bad, the phone was turned of and i reset the battery (in and out) and started the phone to notice that image (as told above).
Now i thought: Yeah, lets just reset the phone throught recovery and were kind of happy by the thought of it. So i tried to access it with the 3-btn-combo but as i just remembered is that in Europe this is patched to be removed.
So i thought, lets send a adb shell to the phone throught Android-spk and i connected the phone and sent the command: Adb wait-for-device, nothing happened and the phone couldn't be found by above said softwares.
So i thought: "Hmm... this isn't good"... So i started googling for what reason this could be and i believe it's called "Semi-bricked", that is "Almost" bricked phone.
So i were sad, called Samsung Tech support and they told me to contact "Mobilbyrån Stockholm" who were a tech repair support, they wanted either 45 £ or my warranty insurance if i wanted the phone fixed. I thought... yeah right, so i sent my phone to the company and i am now waiting for what they are about to do with it.
I suppose a jig would work, thought no one i know got one and i have poor skills at constructing electrical or related components so i put up a thread (like this one) at Sweclockers.com and found a guy that had one which he could lend for me, super, just have to wait and see what happens.
I suppose this "Jig" method could work, but will the computer really notice my phone as a device? It doesn't do that now, thats why i am asking.
At all moments i used Terminal for Android phones (throught market: Android Terminal) by sending commands (since 3-btn-combo didnt work):
> "Su" <- needed for Superuser allowance for controlling the phone
> "Adb reboot recovery"
> "Adb reboot download"
And the phone starts with this picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also, in that correct order.

[Q] Stuck at "Fastboot USB Download Protocol"

Hi, I'm not yet ready start to flash my TF300TL, but today I try to access bootloader menu (Restart and press hold volume down + ON button).
and i accidentally choose (volume down) and chose the "USB icon" and ENTER (volume up), and now my device keep showing "Fastboot USB Download Protocol".
How to cancel this? If not mistaken, need run one command from PC after plug in the USB cable.
Is that anyway to cancel it without using command from pc?
I really newbie and do not know how to cancel, please guide me step by step, thanks in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
~oh, problem solved, I use paper clip pin to press the small hole and it reboot normally~ sigh....sweat...

just hold Power till tab goes off or fastboot
fastboot -i 0x0B05 reboot
Thats all

same240 said:
Hi, I'm not yet ready start to flash my TF300TL, but today I try to access bootloader menu (Restart and press hold volume down + ON button).
and i accidentally choose (volume down) and chose the "USB icon" and ENTER (volume up), and now my device keep showing "Fastboot USB Download Protocol".
How to cancel this? If not mistaken, need run one command from PC after plug in the USB cable.
Is that anyway to cancel it without using command from pc?
I really newbie and do not know how to cancel, please guide me step by step, thanks in advance.
~oh, problem solved, I use paper clip pin to press the small hole and it reboot normally~ sigh....sweat...
Click to expand...
Click to collapse
I actually at the same point-what to do fro there i am not sure-based on the picture-is it ready to root-or flash the recovery img either from CWM or TWRP??
and if so ......how do I flash the image (or better yet) how do I rename the image and store it where i need to for my rooting process to be finalized...THANKS in advance......
Sent from my ASUS Transformer Pad TF300T using xda premium
---------- Post added at 01:54 PM ---------- Previous post was at 01:53 PM ----------
BTW thank you SAME240 for posting this question or image-this is where i am at in rooting process....
Sent from my ASUS Transformer Pad TF300T using xda premium

Well, i'm planning to root for my new unit TF300TL (4G/LTE), until now I still do not understand and how to start it.
Can anyone point me a direction step by step how to root / unlock for my device so that I can flash it with CleanRom?
Really appreciate if got a simple step by step before I can flash it.
and I'm totally do not know what is fastboot, bootloader, CWM and TWRP, anyone can guide me?
If without anything now, can i just download the ROM and flash it directly?
or I need to unlock something or install something before can flash it?
~help~help~

mikaole said:
just hold Power till tab goes off or fastboot
fastboot -i 0x0B05 reboot
Thats all
Click to expand...
Click to collapse
I read and see a lot of "fastboot", actually how to type the command?
Type on PC > RUN > CMD? or need software to run on PC then type this command?

same240 said:
I read and see a lot of "fastboot", actually how to type the command?
Type on PC > RUN > CMD? or need software to run on PC then type this command?
Click to expand...
Click to collapse
You need to install ADB platform tools (search the forum for it) and proper drivers (I used Universal Naked Driver), then follow the directions in this thread. The driver will enable Windows to "see" your device as fastboot, and the platform tools will allow you to issue ADB commands from within its folder. You need to also put your tab in fastboot mode (if you have custom recoveries such as CWM ot TWRP) by going to recovery menu and select the USB icon.
Note: once in cmd admin mode, you must first navigate to the platform-tools folder, wherever it is located. Ex: cd C:\platform-tools\ assuming that your PT folder is in drive C on your PC.

graphdarnell said:
You need to install ADB platform tools (search the forum for it) and proper drivers (I used Universal Naked Driver), then follow the directions in this thread. The driver will enable Windows to "see" your device as fastboot, and the platform tools will allow you to issue ADB commands from within its folder. You need to also put your tab in fastboot mode (if you have custom recoveries such as CWM ot TWRP) by going to recovery menu and select the USB icon.
Note: once in cmd admin mode, you must first navigate to the platform-tools folder, wherever it is located. Ex: cd C:\platform-tools\ assuming that your PT folder is in drive C on your PC.
Click to expand...
Click to collapse
That's perfect and details guide, thank you very much and appreciate.
Well, i just notice that CleanROM seem like cannot work on my TF300TL, which is 3G/4G/LTE model, once installed, the 3G cannot work anymore. Sigh...
anyway, thanks for your tips and guide here. :good:

Hi. i have a acer iconia tab A700. try to hard reset it but it says only: Starting fastboot USB download protocol. what to do? have forgot my username and code. have tryed to hard reset as usemanual says.
help please

Raymond larsen said:
Hi. i have a acer iconia tab A700. try to hard reset it but it says only: Starting fastboot USB download protocol. what to do? have forgot my username and code. have tryed to hard reset as usemanual says.
help please
Click to expand...
Click to collapse
Same for me. A700. Adb doesn't reconize the device. please repond if there is help for Raymand and I.

[GUIDE] How to convert TMobile OP7 to International.

First of all this is not my work I only tested theirs.
Credit to @themustached for finding that a patched .ops was the solution.
This guy doesn't even have the damn phone yet and did this for us so show some love. You can donate to him through paypal here - http://paypal.me/dustinwann
Also @Eliminater74 @jkyoho and others for their hard work and dedication to this conversion.
Disclaimer: I do not take responsibility for any damage done to your device by using this procedure. Everyone has problems sometimes so be civil and ask clear questions explaining where you failed if you expect help.
These instructions will convert your TMOBILE Oneplus 7 PRO to the International version of the phone.
This lets you unlock the bootloader, root, twrp etc.. Sim unlock is still being worked on.
Take a breath, drop the hype and read every single step before you even plug your phone into the PC.
These steps assume you understand you lose all data on the device, are sim unlocked, have the Download mode drivers installed, adb and fastboot and your device powered OFF.
1) Download both of these archives and extract them to a folder you can locate. - https://mega.nz/#!289BVITR https://mega.nz/#!St1DiShb Mirror - https://www.androidfilehost.com/?w=files&flid=294946
2) Open the MSM tool and uncheck the box next to SHA 256.
3) Hold both volume buttons for 5 seconds then plug in the USB cable. OR In ADB type "adb reboot edl".
4) Watch the MSM tool and the second it says *Connected* next to one of the COM ports, press START.
5) DO NOT unplug the device until after it says Success in green.
6) Once the phone boots into the system, go through all the setup options.
7) Enable Developer Options and enable OEM Unlocking.
8) Enter bootloader mode on your device and type "fastboot oem unlock".
You now have an unlocked international OP7.
If you want to root and install twrp dont take the OTA yet.
-Follow these two threads below then take the OTA, do that after you root and twrp. You can preserve root by going into Magisk Manager after the OTA installs, then press the top Install button on the right and use the after OTA option.
This will put you on the latest version with twrp, root and working sound/wifi.
1) Root - https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-root-oneplus-7-pro-patched-boot-t3931205 by @acervenky
2) Twrp - https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3931322 by @mauronofrio
3) OTA zips - https://forum.xda-developers.com/oneplus-7-pro/how-to/oneplus-7-pro-global-repo-oxygen-os-t3930585 by @Titokhan
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
*Future proofing Update*
Hot off the press. Here is a tool that will allow you to patch an ops file without having to download a new modified one every update.
You can use this with a stock MSM or the modified one linked above. Must be run on an unmodified ops..
Global
EU
China
1) Extract the Patcher into the same directory as your MSM tool and OPS firmware.
2) Launch the Patcher as admin. Now select the ops you want to patch and check all the boxes under Patch Options and click Start.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3) Once it finishes you will be able to flash the ops file from the stock MSM or the modded one above.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
*TMobile Update*
The MSM tool/firmware for TMobile OP7Pro is now released.
You can find it on my other thread - HERE
Credit for this one also goes to @themustached.

Guacamole decryption key - 836tI3vZa3ixi9487IpxNEw-I5RGT3QjJXmm0dGYLcI
Additional decryption key - ezLIQmIL9j7OQV1qcvJtof8M0pCHYY_nC9W4pDaw3is
~FAQ~
~Not fast enough to start flash
If you press Start on the MSMTool it will "wait for device".
Doing this will make the flash start right when the phone enters EDL.
~MSM is getting stuck on Param Preload or something similar.
This can be caused by having old Oneplus L2 drivers from a different model installed.
-Follow the steps up until MSM gets stuck. Open Device Manager, right click on the Qualcomm device under the COM section.
Click Uninstall but do not check the box to delete the driver, then click Scan for Hardware changes. Now go to the folder you extracted the L2 driver to, right click the inf file and click Install.
You should be able to use the MSM tool right away but may need to exit and re-open. Also restart back into EDL if needed.

You guys are the best, I'm going to try it once I get home. Do I need to unlock the bootloader if I don't want to after the conversion?
Sent from my GM1915 using Tapatalk

Can u lock bootlaoder and stay like international version plus get update update the air without pushing it?

I converted mine manually or I'd do this, but that was quick boys! Awesome job. Going to be lots of happy people now that this is out.

Niceeeeeeee

So this is the patched tool to convert to intl

Yup I'll give it a shot once I get home!
Sent from my GM1915 using Tapatalk

Can't wait to try this when I get home. Thank you all for the work.

So I did accidentally unplugged the device after doing the 5 seconds thing and plugged it into a computer. I unplugged it by accident and now it won't turn on.

Strike99Fear said:
So I did accidentally unplugged the device after doing the 5 seconds thing and plugged it into a computer. I unplugged it by accident and now it won't turn on.
Click to expand...
Click to collapse
Just press the power button for 20 seconds or so

Primal instinct said:
Just press the power button for 20 seconds or so
Click to expand...
Click to collapse
Tried it and it won't work.

i connect the op and show Qualcomm QD loader on device manager but then it will disconnect and show usb mass storage device

Strike99Fear said:
So I did accidentally unplugged the device after doing the 5 seconds thing and plugged it into a computer. I unplugged it by accident and now it won't turn on.
Click to expand...
Click to collapse
Try hold power and both volume buttons

Bootloader unlock is optional, correct?

Adb reboot edl also works but fully converted here

Primal instinct said:
Try hold power and both volume buttons
Click to expand...
Click to collapse
That worked thanks brother!

Does deleting modem St files remove the Sim lock on the OP7 as well?

I'm gonna try it wish me luck

OEM unlocking is greyed out for me at Step 7, not sure if I did something wrong.

Flash Unlock Reset (Adb, Fastboot, download mode, Edl,)

Advanced Android Box 4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Application subsidiary :
aabox
mtk module
samsung frp tool
R-tomato tool
Qualcomm master tool
Features :​
RUU flashing
Qualcomm flashing
Samsung Flashing
adb gmail reset
fastboot flashing
edl gmail account remove
sprd frp remove
Remove Gmail helper for Huawei
samsung download mode remove frp
.pac file flashing
Adb Tool
Fastboot tool
bootloader lock and unlock
adb enabler (boot.img&fastboot mode for huawei)
Touch not work after update or replaced lcd for J210f Fix
Support Brands
Samsung
Huawei
Oppo
MIUI
Micromax
Greentel
Etel
Sky
Techno
Lava
Lenovo
HTC
Vivo
Alcatel
Sony
LG
Supported Chipset
Qualcomm
SPD
MediaTek
HiSilicon
Exynos
Marvell
Spreadtrum
Coolpad
Alwinner
Support Modes
ADB
Fastboot
Bootloader Mode
Edl
Download Mode
Qload 9008 Hs Usb Mode
MTP for Huawei
rescue mode
recovery mode
FAQ
How to Update?
Click Update button in Application or Run Update.exe in application folder. And click check and update.
why detect as Virus?
I have used windows process moniter for detecting Usb in runtime so in some scaners detect it as malware.
But soon i will fix it.! WMP.exe is a signed process exe. But fixing soon.!
Do i have to use internet always?
No ! There is an on off feature to use as Offline. Goto (about) then (activation) and untick server support,
Then click save thats all!
Why aabox3 pro?
If you are a android device user and have some problem. Repair or flash it at home or a small shop.
But you cant afford a software box? Aabox3 pro is free for you to use what i need is only thanks button pressed!
This box / tool fully made by and from help of Xda members... xda had helped this box support since 2010.
Aabox then Aabox2 and now Aabox3 pro, this tool does some process free which other box does for credits.
You will find it when you use it.
Why need Online server?
Frp and rooting and some model loaders are changing per week or daily so application cant be updated every time.
So it uses xml serialization from aabox protected server ftp to use its lastest scripts.
All fails in a process and errors are fixed in every update. So you need Server support if you enable in settings!
Default settings will be enabled server support.!
Why Start button not work?
I wont work if u have install in a unofficial setup or not in a default path as c:/artiven/aabox.
Try to Click Check port to Enable Start button will fix in all errors!
Run as Admin rights to save settings and io control need to right zip files and get backups so use Admin Rights!
Aabox3 Freeze or Show error!
Freezing is because of adb or fastboot device not connected. (Will be fixed soon)
Remove device from usb and reconnect will solve!
Error with code like (error 022, error 66, error b1a) please send a email to ([email protected]) with error code!
Or Write it in comments or posts in here with error code!
Loaderdll error fix
Install Fastboot drivers and restart application in admin rights.
loading files error fix
install Only aabox official setup from here below
screenshots
link: https://www.mediafire.com/file/3nes...2_samsung-kill-switch-edition_19.17v.rar/file
Version:19.17v
Update:01.08.2022
Official aabox website
official youtube​

Samsung Language Change done Sucessfully
Any Android Language Change Working
Samsung Note 4 Language Change Done!
This method Can Change any Device without Root
Method
1 Open tool
2 Click Check port
3 Go to Dev Options
4 tick language change
5 select language
6 click start
Wait 1min all done thats all.
Enjoy

Always Click Check port for Start application or Search devices

Thread Closed.
Thanks
SacredDeviL666.

SacredDeviL666 said:
Thread Closed.
Thanks
SacredDeviL666.
Click to expand...
Click to collapse
Reopened and Special thanks to :SacredDeviL666

Not seeing zte supported.. I have a k88 tablet (Jasmine) that's rooted with twrp and rom. Yet not bootloader unlocked I'm pretty sure. Would this tool execute the cmd code "OEM fastboot unlock" even if fastboot is inaccessible on this tablet (uncertain exactly why, but even adb reboot fastboot prompts a restart to /system.) Thank you

Help
Jiveturkey89 said:
Not seeing zte supported.. I have a k88 tablet (Jasmine) that's rooted with twrp and rom. Yet not bootloader unlocked I'm pretty sure. Would this tool execute the cmd code "OEM fastboot unlock" even if fastboot is inaccessible on this tablet (uncertain exactly why, but even adb reboot fastboot prompts a restart to /system.) Thank you
Click to expand...
Click to collapse
If your tab have fastboot.
then boot to it.
then in aabox go to mtk tab
then fast boot tab
click unlock bootloader
if you get any error or need help kindly post here
or copy the log and paste here
Download link - Via OUO.io (if download host expires i will change it in here)
Earn money on short links. Make short links and earn the biggest money - ouo.io
ouo.io
direct download link to host
https://www.up-4ever.org/4zmflm6rdzpj

Can't download.
Need to unlock my son's tab

Thread reopened.
Download link to be repaired ASAP.
Thank you!