Has anyone a good Guide/Tut to Root the A51 (Android 12) with the Original Samsung Firmware?
SEE Next Post
Thx
Regards Alex
after many try's here the Guide:
!!! I am not responsible for any loss and damage to your device. Apply the below steps with your own risk.
!!! You will loose all your data on the phone
1. Unlocking Bootloader
https://github.com/topjohnwu/Magisk/blob/master/docs/install.md#unlocking-bootloader
2. download the firmware zip (must be the same Firmware then on the Phone!!!)
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
3. Unzip Firmware and Copy AP file to Device
Unzip the firmware and copy the AP tar file to your device. It is named as AP_A515F...............tar.md5
4. Install Magisk APK
https://github.com/topjohnwu/Magisk/ Minimum version 24.3
5. Patch the AP Firmware File with Magisk App
Open the Magisk app from the app drawer.Tap on the “INSTALL” button.“Select and Patch a File.”Navigate to the internal storage and select the AP firmware file that you previously copied to the phone.Once the file is selected, tap on “LET’S GO.”Wait until Magisk patches the file.
6. Copy Patched file to Computer and unzip with 7Zip
The patched image file can be found in the “Downloads folder.”Now connect your phone to the PC and copy the magisk_patched.tar file to the ComputerUnzip the file in the Folder "magisk_patched"7. unzip the Original AP file and extract the img file
Unzip (with 7zip) the AP file to a new FolderYou will find recovery.img.lz4 and vbmeta.img.lz4 in the folderExtract img with LZ4 (move the lz4 file to the lz4.exe)LZ4 – Download
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8. make a new .Tar file called boot.tar
put the boot.img from Magisk inside the tarput the extracted recovery.img and vbmeta.img inside same TAR9. FLASH Magisk with Odin
Boot your Samsung Galaxy into Download ModeFirst, power off your Samsung Galaxy device.Connect your smartphone to your PC while holding the Volume Down + Power keys together.You will now see the Download Mode screen.
run Odin3 xxx.exehttps://odindownload.com/
BL: Select the firmware file starting “BL”
AP: Select the Patched AP firmware file (boot.tar)
CP: Select the firmware file starting “CP”
CSC: Select the firmware file starting “CSC” (Not Home)
Once done finally, click “Start” to begin the flashing process.
10. Recovery Mode
Now once the Galaxy A51 boots into stock recovery mode follow the below steps.Go to Wipe data/factory reset. (Use Volume keys to navigate between the options and Power key to select an option.)Select “Factory data reset.”Once done select “Reboot system now.”The first boot will take some time.That’s it! You have successfully rooted Samsung Galaxy A51 using Magisk.
11. Configure ur Phone
12. Install Magisk and launch the app
It should show a dialog asking for additional setup.Let the app do its job and automatically reboot the device.
Voila!
Thanks to:
https://magiskapp.com/how-to-root-samsung-galaxy-a02s/
https://github.com/topjohnwu/Magisk/blob/master/docs/install.md
https://forum.xda-developers.com/t/tool-frija-samsung-firmware-downloader-checker.3910594/
Worked !! Thaank You Bro !!
divertimento
vishnushank4r said:
Worked !! Thaank You Bro !!
Click to expand...
Click to collapse
Funcionou, amigo?
Mod translation via GT: Did it work, friend?
Ye
Welsker said:
divertimento
Funcionou, amigo?
Mod translation via GT: Did it work, friend?
Click to expand...
Click to collapse
Yes It Did !!
Please someone provide the file which is used to root a515f and flash via odin. Thanks in advance.
Hashim143 said:
Please someone provide the file which is used to root a515f and flash via odin. Thanks in advance.
Click to expand...
Click to collapse
I give you now a link to my cloud where u can download all the files. Please write if u was successful to Root your Phone.
Important is that u have the same Buildnumber on your Phone:
SM-A515F__A515FXXU5FVD....
https://ncloud.the-chosen.li/index.php/s/jMqwNLnJ9KAE94z
if u have the same Version it maybe work ... u can give a try.
Tell us if it works.
Regards Alex
I am not responsible for any loss and damage to your device
//Edit_1 = Files are uploaded
//Edit_2 = new Link
deadmeiker said:
I give you now a link to my cloud where u can download all the files. Please write if u was successful to Root your Phone.
Important is that u have the same Buildnumber on your Phone:
SM-A515F__A515FXXU5FVD....
https://ncloud.the-chosen.li/index.php/s/dLi9SEMmdE6kjaK
if u have the same Version it maybe work ... u can give a try.
Tell us if it works.
Regards Alex
I am not responsible for any loss and damage to your device
//Edit_1 = Files are uploaded
Click to expand...
Click to collapse
Build number is SM-A515F__A515FXXU5FVE2
Will it work?
no
i will download the new Version and upload a new one...i will replay again if i upload everything....but u need to give me some hours or one day
Workedd !! thank's bruhh
okey the files are uploaded
....
https://ncloud.the-chosen.li/index.php/s/jMqwNLnJ9KAE94z
Andyramires17 said:
Workedd !! thank's bruhh
Click to expand...
Click to collapse
One question ... u used the Workaround or the files i uploaded?
deadmeiker said:
One question ... u used the Workaround or the files i uploaded?
Click to expand...
Click to collapse
no, i just follow the workaround
deadmeiker said:
okey the files are uploaded
....
https://ncloud.the-chosen.li/index.php/s/jMqwNLnJ9KAE94z
Click to expand...
Click to collapse
It's working with your uploaded file. I just flashed boot.tar via odin and it's working like a charm. Thanks for uploading.
can any one make video form step 7 I don't understand what to do with this program When I click on the exe file nothing happens
mohamedhamed010 said:
can any one make video form step 7 I don't understand what to do with this program When I click on the exe file nothing happensView attachment 5622911
Click to expand...
Click to collapse
move the .lz4 file on the lz4.exe and you will get a .img file
Hashim143 said:
It's working with your uploaded file. I just flashed boot.tar via odin and it's working like a charm. Thanks for uploading.
Click to expand...
Click to collapse
Perfect.
you flash only the boot.tar with odin?
no other files?
deadmeiker said:
move the .lz4 file on the lz4.exe and you will get a .img file
Click to expand...
Click to collapse
my softwar get updated now i have this is this update work with this files and if it will work how can i use the files
A51
Nextcloud - a safe home for all your data
ncloud.the-chosen.li
mohamedhamed010 said:
my softwar get updated now i have this is this update work with this files and if it will work how can i use the files
A51
Nextcloud - a safe home for all your data
ncloud.the-chosen.li
View attachment 5623071
Click to expand...
Click to collapse
download the VD files and flash via Odin
...
if u don't understand flashing, inform by yourself on xda or other pages.
....
Regards Alex
deadmeiker said:
download the VD files and flash via Odin
...
if u don't understand flashing, inform by yourself on xda or other pages.
....
Regards Alex
Click to expand...
Click to collapse
all file or boot.tar only ?
Related
please download Root to Samsung Galaxy Note Pro 12 3g sm-p901
1 ..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2..
3..
Means no one will have the same hardware and the Root .. Please solution of the problem
alhgan2014 said:
I hope I Want Root attention to two Ergonomics I have tried before and failed periods transferred
Waza possible, please download Root to fit his two Samsung Galaxy Note Pro 12 3g sm-p901
Click to expand...
Click to collapse
um...
Thanks
Did you try towelroot?
Towelroot is only for Qualcomm devices, the P901 is an Exynos device.
Read this: http://androidxda.com/root-samsung-galaxy-note-pro-12-2-sm-p901
And the original autoroot file is in this list: http://autoroot.chainfire.eu/#odin
dodo99x said:
Towelroot is only for Qualcomm devices, the P901 is an Exynos device.
Read this: http://androidxda.com/root-samsung-galaxy-note-pro-12-2-sm-p901
And the original autoroot file is in this list: http://autoroot.chainfire.eu/#odin
Click to expand...
Click to collapse
Yeah I think the only option is cf autoroot and tripping knox
Sent from my Fired-up Kitty
Ok, now that he's fixed his comment so it makes a tiny bit of sense. I had this problem with the p900 as well. This was how I fixed the hang on cache issue very quickly.
Get 7zip.
1. Open the zip file you got for cf-autoroot with 7zip. Extract the CF-Auto-Root-v1a3g-v1a3gxx-smp901.tar.md5 file.
2. Remove .md5 extension and rename the file CF-Auto-Root-v1a3g-v1a3gxx-smp901.tar
3. Open this file with 7zip, extract recovery.img from it. Set this aside, you'll need it in a few more steps.
3. Download Caboomi's Recovery img2tar odin maker tool from here http://forum.xda-developers.com/showthread.php?t=2281287
4. Unzip the tool into a folder. Delete the recovery.tar.md5 it comes with. You will also see a Runme.bat file.
5. Edit the bat file with something like Notepad ++. The second line will be
Code:
bin\tar -H ustar -c recovery.img > recovery.tar
Change this to
Code:
bin\tar -cf recovery.tar recovery.img
Save the file.
6.Remember the recovery.img file you took from the CF-Auto-Root-v1a3g-v1a3gxx-smp901.tar in step #3? Throw that file into the same folder where the Runme.bat file is located.
7. Run the .bat file. It will produce a new recovery.tar.md5
8. Flash this new recovery file in Odin. HAVE AUTOREBOOT TURNED OFF.
9. Flash the original CF-Auto-Root-v1a3g-v1a3gxx-smp901.tar.md5 file after that.
10. Hopefully success?
Got everything but the result is still the same problem
Gatsrom said:
Ok, now that he's fixed his comment so it makes a tiny bit of sense. I had this problem with the p900 as well. This was how I fixed the hang on cache issue very quickly.
Get 7zip.
1. Open the zip file you got for cf-autoroot with 7zip. Extract the CF-Auto-Root-v1a3g-v1a3gxx-smp901.tar.md5 file.
2. Remove .md5 extension and rename the file CF-Auto-Root-v1a3g-v1a3gxx-smp901.tar
3. Open this file with 7zip, extract recovery.img from it. Set this aside, you'll need it in a few more steps.
3. Download Caboomi's Recovery img2tar odin maker tool from here http://forum.xda-developers.com/showthread.php?t=2281287
4. Unzip the tool into a folder. Delete the recovery.tar.md5 it comes with. You will also see a Runme.bat file.
5. Edit the bat file with something like Notepad ++. The second line will be
Code:
bin\tar -H ustar -c recovery.img > recovery.tar
Change this to
Code:
bin\tar -cf recovery.tar recovery.img
Save the file.
6.Remember the recovery.img file you took from the CF-Auto-Root-v1a3g-v1a3gxx-smp901.tar in step #3? Throw that file into the same folder where the Runme.bat file is located.
7. Run the .bat file. It will produce a new recovery.tar.md5
8. Flash this new recovery file in Odin. HAVE AUTOREBOOT TURNED OFF.
9. Flash the original CF-Auto-Root-v1a3g-v1a3gxx-smp901.tar.md5 file after that.
10. Hopefully success?
Click to expand...
Click to collapse
Got everything but the result is still the same problem
alhgan2014 said:
Got everything but the result is still the same problem
Click to expand...
Click to collapse
Here I made one for you, try this one in Odin click me I didn't zip it since it's just the tar.md5 file not all the extra odin stuff. Don't modify this file's extensions, put it straight into odin.
After downloading, you should check the md5 matches: 44d09a57009cfdbb322f0c9ca13bd4fe
Let me know if it works. Otherwise we have to look for another problem cause/solution.
Please solution of the problem
Means no one will have the same hardware and the Root ؟
Please solution of the problem
Pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Salvation is no hope for me is not reasonable Root site developers not to be in the Real Root device
Samsung Galaxy Note Pro 12 3g sm-p901
Thank god! Solution of the problem
Thank god! Solution of the problem by means of friend gatsrom
alhgan2014 said:
Salvation is no hope for me is not reasonable Root site developers not to be in the Real Root device
Samsung Galaxy Note Pro 12 3g sm-p901
Click to expand...
Click to collapse
From the message I got from you this morning, we seem to have got it going. Device is still rooted and okay right?
Gatsrom said:
Here I made one for you, try this one in Odin click me I didn't zip it since it's just the tar.md5 file not all the extra odin stuff. Don't modify this file's extensions, put it straight into odin.
After downloading, you should check the md5 matches: 44d09a57009cfdbb322f0c9ca13bd4fe
Let me know if it works. Otherwise we have to look for another problem cause/solution.
Click to expand...
Click to collapse
can u please re-upload the file, i got the same exact problem. ill be just flashing the file using odin right?
thx in advance
Please re up the file
Gatsrom said:
From the message I got from you this morning, we seem to have got it going. Device is still rooted and okay right?
Click to expand...
Click to collapse
Hi Gatsrom,
I have the same problem with my P901, tried already the steps you mentioned but didn´t work.
Can you please re up the file so I can try this.
Thanks
posting error
21667 said:
can u please re-upload the file, i got the same exact problem. ill be just flashing the file using odin right?
thx in advance
Click to expand...
Click to collapse
HNevenEG said:
Hi Gatsrom,
I have the same problem with my P901, tried already the steps you mentioned but didn´t work.
Can you please re up the file so I can try this.
Thanks
Click to expand...
Click to collapse
Let me go through the emails and files, see if I still have it.
Please help me to solve th eProblem
alhgan2014 said:
Thank god! Solution of the problem by means of friend gatsrom
Click to expand...
Click to collapse
Dear alhgan,
do you still have the files you got from Gatsrom?
I have the same problem then you had.
Thanks!
Finally rooted my P901
After hundred times stucked at cache.img I found the reason and got my p901 finally rooted!
Two things which I made wrong, so remember the following two points:
1. You have to switch on USB debugging in “development options” under Settings on your P901!
2. You have to start Odin as Admin!
Go on with the normal flashing procedure:
Start P901 in flashing mode
Start Odin as Admin (use only the Odin version which comes in the package from CF!)
Load tar.md5 File in AP
Connect the P901 to PC
Start
That´s all!
please rebuild the file to root
Gatsrom said:
Let me go through the emails and files, see if I still have it.
Click to expand...
Click to collapse
Tired of all the meathods... nothing works .... even enabling debugging or running odin in admin.... its a request bro.... please please remake the file to root p901... its stuck at the cache.img....
Good News All Sky Vega IM 850 User Today 22-10-14 Official Pantech Has released most waited version of Kitkat rom for their user. Im making a quick response to this and giving the link to binx file for download and offline flash.
Proof of News : Go to this official Pantech Link and check
ALWAYS PRESS THANKS IF I HELPED YOU
ROM download BINX file
Press on "Click to show content Button"
This is for IM 850 K
Click Here to Download
Size: 852 MB
This is for IM 850 L
Click Here to Download
Size : 906 MB
This is for IM 850 S
Click Here to Download
Size : 1.1 GB
Download "Download.inf" File See notes
Click here to download
Alternative: Downoad .pdl ROM FIle
Press on "Click to show content Button"
This is for IM 850 K
Click Here to Download
Size: 852 MB
This is for IM 850 L
Click Here to Download
Size : 906 MB
This is for IM 850 S
Click Here to Download
Size : 1.1 GB
To Flash ROM What you Need first--
Task 1> Download .binx file as per your phone Model from above link
Task 2> Download .inf file See notes
Task 3> Sky flash tool 2014 B2
Task 4> Download Drivers * if you already have drivers for your phone don't need to download this.
Installing
1. At first Install Drivers. If you already have installed drivers in PC you don't have to download or install again.
2. Extract "sky flash tool 2014 B2.zip" with any zip file manager like winzip or 7zip or winrar
To anywhere and Copy Downloaded .BINX file into this location:
Sky Flash Tool 2014 B2\sky_home\IM-A850L Folder --- if you have IM-A850L Phone
Sky Flash Tool 2014 B2\sky_home\IM-A850S Folder ---- if you have IM-A850S Phone
Sky Flash Tool 2014 B2\sky_home\IM-A850K Folder ---- if you have IM-A850K Phone
If there is no Folder containing that name Just create Folder and rename it as above.
3. Copy download.inf file to this location--- Sky Flash Tool 2014 B2\sky_home
4. Run "fixserver.exe" A Command line window will appear just press any key...
5. Run "Sky_Flash_Tool_2014.exe" Only internet explorer browser support
A blue color window will appear. Caution : Do Not Close this window. Until Update finishes.
Also, Internet explorer will open with update page.
6. Put your phone into S/W upgrade mode. How to do that? follow those steps
Switch off phone, press and hold Volume Up + Volume Down + Power
Phone will go to bootloader mode
Now press volume up down button and choose PLD DOWNLOAD option pressing power button
It will show S/W mode
7. Connect phone with PC or Laptop
if phone is not detected see if driver is installed properly. if yes then Disconnect and connect again.
8. Now in upgrade page Click the Upgrade button While S/W mode and wait for results finish to 100%
if everything ok upgrade button will appear. Otherwise it will spin.
NOTE:
Download.inf file why we need this>>>
This file is needed to identify the latest version of ROM for flashing purpose. If you have old download.inf file and new .binx file you will end up with error. So Latest .Binx file + Latest .inf file
Problems:
* The central directory was not found in the archive (or you were trying to open not the last disk of a multi-disk archive)
if you face this problem its the problem of Old "download.inf" + new .binx file . Remember you need both latest .inf + latest .binx file
Reference:
* Pantech Vega R3 IM-A850L - One Way Road
* flash rom stock binx file and zip file for pantech sky im-a850 lsk
stuck
After following your instructions and update it, it's stuck on SK Telecom loading screen, how to fix that?
*Edit
After repeating the instruction for the 2nd time, it work
Shunui said:
After following your instructions and update it, it's stuck on SK Telecom loading screen, how to fix that?
*Edit
After repeating the instruction for the 2nd time, it work
Click to expand...
Click to collapse
Glad to hear that.
Press thanks if I helped you
Good day sir! I can not find the fixserver.exe, where can i find it? In the Sky Flash Tool 2014 B2 folder, there is only Sky_Flash_Tool_2014.exe and there is no fixserver.exe.
Thanks in advance!
Is it a must to use 32bit window?
Thanks in advance.
Stuck flashing
Stuck flashing
Please help me. My Set doesn't working !! : crying: :crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey guys . i have sky 850S Nd i have already install a custom rom ... Now i want to upgrade my cell with official update of kitkat but after doing all steps clearly my S/W is'nt upgrade ... Suggests me what could i do ? Rather if Uh Have its Orignal rom then Send me The link .... Thanks In advance .. Plxxx Help meh Out Ov this problem .. i love Kitkat
solution
Mian Ali said:
Hey guys . i have sky 850S Nd i have already install a custom rom ... Now i want to upgrade my cell with official update of kitkat but after doing all steps clearly my S/W is'nt upgrade ... Suggests me what could i do ? Rather if Uh Have its Orignal rom then Send me The link .... Thanks In advance .. Plxxx Help meh Out Ov this problem .. i love Kitkat
Click to expand...
Click to collapse
follow the procedure as described in artical above..i tried and sucessfuly update kitkat..for further info email junaidumtee70at the rate of gmai dot com...
bardzwin said:
Good day sir! I can not find the fixserver.exe, where can i find it? In the Sky Flash Tool 2014 B2 folder, there is only Sky_Flash_Tool_2014.exe and there is no fixserver.exe.
Thanks in advance!
Click to expand...
Click to collapse
Please extract the compressed file again. I checked the compressed file it's ok. Fixserver.exe file is there.
xminirom said:
Please extract the compressed file again. I checked the compressed file it's ok. Fixserver.exe file is there.
Click to expand...
Click to collapse
hi pro.
you have the tools to extract the files binx. if so, are you can share me. Thanks!
stuck flushing..
Aunkon said:
Stuck flashing
Please help me. My Set doesn't working !! : crying: :crying:
Click to expand...
Click to collapse
is it ok now?
howmuch time it take
hoe much time it take to update i am stuck on this screen for 25 mints nothing happend :crying: :crying: :crying:
Thank U Brooo......
xminirom said:
Please extract the compressed file again. I checked the compressed file it's ok. Fixserver.exe file is there.
Click to expand...
Click to collapse
disable antivirus before extrracting the file. antivirus deletes fixserver.exe
sonnguyenpg said:
hi pro.
you have the tools to extract the files binx. if so, are you can share me. Thanks!
Click to expand...
Click to collapse
hi bro , what wrong when i click the a850s BINX ,error page and the download.inf is error ..
what wrong ? help me sir
do you have a copy or working link of binx file for im 890k
i tried and sucessfuly update kitkat
i cant download the binx files, how to download sir?
---------- Post added at 10:31 AM ---------- Previous post was at 10:19 AM ----------
i cant download the binx files and inf file, im directed to this site curitel.com
My sky vega 850 s touch screen gets hot and battery shunt down within 5 minutes even charged fully.i got new original battery but all in vain.......................is it software problem or mother board?.................... Please help me what to do?
brother i cant download inf file from curitel website as its showing a main page where nothing is useful its all about related ad links. pls help me i need inf file for pantech vega im-a870K version IM-A870K_S0839213.
can any one inbox me or give me a working link
Hi
I created root method for the last version of samsung J2 Prime G532G - G532GDXU1APL1.
It based on modified stock recovery with custom keys (mine), which allow to install a special zip that signed with those keys.
This method include's a patched boot.img (sepolicy), in order the root work properly. (this is normal system root - not systemless, and from Android 6.0 or samsung 5.1.1 and above need also pathed boot)
The phone must be with G532GDXU1APL1 version, or it wont work.
It can be downloaded from here
G532GDXU1APL1
Instructions:
Download this file, and extract it to some folder.
G532GDXU1APL1_root_by_avicohh
Open odin and flash the .tar file inside the folder (In AP).
This file contains the custom recovery, a patched boot, and an empty cache.img in order the phone will restart to recovery after flashing.
In recovery choose "Apply update from ADB".
Run the .bat script file from the "SuperSU sideload installer" folder.
Wait until it finish, the phone will restart automatically with SuperSU inside.
Good luck!
Credits:
@Chainfire for SuperSU
@osm0sis for AIK
P.S. (for devs)
This method can be modified to another build / device, by patching the sepolicy inside boot.img (see here), and replacing the res / keys file inside the recovery.img with my keys. (Attached)
You can unpack and repack boot and recovery images with this tool. (It recomanded to this on linux in order to keep the files permissions)
The stock recovery doesn't support the standart SuperSU installer bacause it bash script, so i wrote another one in Edify. (this zip should work on any device with android 5.11 - 6.0.1 and armv7)
I am waiting new method root for G532G (G532GDXU1APL1)
Now..
great work ,,thanks bro .......I 'm so happy .....
Manual instruction recovery_custom_keys.7z ??? thank
---------- Post added at 02:11 PM ---------- Previous post was at 02:07 PM ----------
avicohh said:
Hi
I created root method for the last version of samsung J2 Prime G532G - G532GDXU1APL1.
It based on modified stock recovery with custom keys (mine), which allow to install a special zip that signed with those keys.
This method include's a patched boot.img (sepolicy), in order the root work properly. (this is normal system root - not systemless, and from Android 6.0 or samsung 5.1.1 and above need also pathed boot)
The phone must be with G532GDXU1APL1 version, or it wont work.
It can be downloaded from here
G532GDXU1APL1
Instructions:
Download this file, and extract it to some folder.
G532GDXU1APL1_root_by_avicohh
Open odin and flash the .tar file inside the folder (In AP).
This file contains the custom recovery, a patched boot, and an empty cache.img in order the phone will restart to recovery after flashing.
In recovery choose "Apply update from ADB".
Run the .bat script file from the "SuperSU sideload installer" folder.
Wait until it finish, the phone will restart automatically with SuperSU inside.
Good luck!
Credits:
@Chainfire for SuperSU
@osm0sis for AIK
P.S. (for devs)
This method can be modified to another build / device, by patching the sepolicy inside boot.img (see here), and replacing the res / keys file inside the recovery.img with my keys. (Attached)
You can unpack and repack boot and recovery images with this tool. (It recomanded to this on linux in order to keep the files permissions)
The stock recovery doesn't support the standart SuperSU installer bacause it bash script, so i wrote another one in Edify. (this zip should work on any device with android 5.11 - 6.0.1 and armv7)
Click to expand...
Click to collapse
recovery_custom_keys.7z hướng dẫn tay ??? cảm tạ
I don't understand, what instructions?
ask something
this root files include custom recovery?
Yes, but no TWRP. Modified stock recovery.
not only G532GDXU1APL1
Not only G532GDXU1APL1 is working but also G532GDXU1AQA4 is rooted smoothly i have tested on my device. So thanks a lot.:fingers-crossed:
Brother. Can you explain to me ste by step to root sm-g532g on aq4 firmware? Please
:fingers-crossed:
bolda.mia said:
Not only G532GDXU1APL1 is working but also G532GDXU1AQA4 is rooted smoothly i have tested on my device. So thanks a lot.:fingers-crossed:
Click to expand...
Click to collapse
Just do the instruction in the first post.
Hei avicoh
avicohh said:
just do the instruction in the first post.
Click to expand...
Click to collapse
sometimes i have an error when daemon start in cmd, maybe my pc's problem? I used win7 64 bit
Upload log
Log is here
avicohh said:
Upload log
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HELP ME
I ALSO USE STOCK FIRMWARE THAT U GIVE ABOVE G532GDXU1APL1 ,
sometimes there is a messege in CMD that saying ADB out of date :/
I believe it something in your computer.
Try another one.
avicohh said:
Upload log
Click to expand...
Click to collapse
avicohh said:
I believe it something in your computer.
Try another one.
Click to expand...
Click to collapse
another one??????
alfanjawa8 said:
I ALSO USE STOCK FIRMWARE THAT U GIVE ABOVE G532GDXU1APL1 ,
sometimes there is a messege in CMD that saying ADB out of date :/
Click to expand...
Click to collapse
@avicohh WHY SUPERUSER CANNOT BE READ?
Try with another computer.
I my god it is now ask for password, and i have no z2x box to unlock it :/
So maybe @bolda.mia is wrong.
The reason the device ask for password is because the custom boot is based on G532GDXU1APL1 and you have a newer system version. (I think is something related to storage encryption, I don't know exactly)
That's why I said this method should work only on G532GDXU1APL1.
Anyway, flash the stock version back. I believe it will fix the problem even without wipe.
before root, I already flash to lower version brother
avicohh said:
so maybe @bolda.mia is wrong.
The reason the device ask for password is because the custom boot is based on g532gdxu1apl1 and you have a newer system version. (i think is something related to storage encryption, i don't know exactly)
that's why i said this method should work only on g532gdxu1apl1.
Anyway, flash the stock version back. I believe it will fix the problem even without wipe.
Click to expand...
Click to collapse
i know exactly, that i already flashing with the lower rom such as pl1 pk3 etc. And the result is same, ask for password my brother!
Root_N975F_Android10_Beta1/2
As name suggest, this is patch file to root N975F on Android 10 Beta1
This is temporary thread as we don't have AP file to patch with Magisk by normal users. Once official Android 10 available, thread will be trashed.
Instructions :
- First update to Android 10 beta
- Unlock bootloader
- Download : N975F_Q_B1_Root.zip and extract to get N975F_Q_B1_Root_DrKetan.tar.md5 file (For Beta 1)
- Download : DrKetan_N975F_Q_B2_SK8_Root_extract_this_first.zip and extract to get DrKetan_N975F_Q_B2_SK8_Root.tar.md5 file (For Beta 2 SK8 or Beta3)
- Download : DrKetan_N975F_root_Q_B4_SL4_extract_first_this.zipand extract to get DrKetan_N975F_Root_Q_B4_SL4.tar.md5 file (For Beta 4)
- Reboot to download mode
- Flash above downloaded N975F_Q_B1_Root_DrKetan.tar.md5 from AP tab of Odin
- Reboot to Recovery and wipe data
- Download and Install Magisk Manager manually.
- Done!
Thanks and credit to @topjohnwu for Magisk
Hopefully we may soon hear from @geiti94 for TWRP on Android 10
Wow nice DR. you found rooting on Android 10. I move from Note 8 to Note 10 now... Oh ya I once commented on the Note 8 dr.Ketan rom thread.
Sent from my Galaxy Note 10 using XDA Labs
ur the best Dr!!!!
Hey Dr after i extracted the file its saying md5 hash value is invalid
Same as with me,
I try to delete. md5 and odin tar file,
Flash OK, but bootloop not to recovery
MD5 check fail suggest corrupt Download
dr.ketan said:
MD5 check fail suggest corrupt Download
Click to expand...
Click to collapse
I redownload but it is the same
chaobuoisang said:
I redownload but it is the same
Click to expand...
Click to collapse
It is here (attach file)View attachment 4863711
chaobuoisang said:
I redownload but it is the same
Click to expand...
Click to collapse
Try different browser/device
chaobuoisang said:
It is here (attach file)View attachment 4863711
Click to expand...
Click to collapse
I have downloaded and indeed it cause md5 fail
Wait I am uploading again, I will post message here once done
dr.ketan said:
I have downloaded and indeed it cause md5 fail
Wait I am uploading again, I will post message here once done
Click to expand...
Click to collapse
Thanks Dr very much
Waiting for your new upload
chaobuoisang said:
Thanks Dr very much
Waiting for your new upload
Click to expand...
Click to collapse
Re uploaded now
Hey Dr what i did was after i downloaded the file i extract it in my download folder and it worked i have root this may help others thanks my brother
GEEMONEY1 said:
Hey Dr what i did was after i downloaded the file i extract it in my download folder and it worked i have root this may help others thanks my brother
Click to expand...
Click to collapse
Actually issue was older file was corrupted
I have uploaded new and that have fix it
When you say to go into recovery to wipe data, do you mean twrp recovery?
dr.ketan said:
Actually issue was older file was corrupted
I have uploaded new and that have fix it
Click to expand...
Click to collapse
Odin File root OK, recovery OK, reboot OK, but install magisk not root,
Attach File
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
chaobuoisang said:
Odin File root OK, recovery OK, reboot OK, but install magisk not root,
Attach File
Click to expand...
Click to collapse
Read root guide to know how to reboot to system with root
dr.ketan said:
Read root guide to know how to reboot to system with root
Click to expand...
Click to collapse
Which topic, pls let me know because not to have root topic for android 10 beta
dr.ketan said:
Read root guide to know how to reboot to system with root
Click to expand...
Click to collapse
Thanks for your great work. Root Ok
When I update Magsik I use "normal reboot" nothing with button this time?
Can I install TWRP_3.3.1_N10+_N975_ASHE_V3_MAGISK_PATCHED file to get TWRP installed or?
I read in OP, thanks, so I`m also waiting for @geiti94 update for Android 10
chaobuoisang said:
Which topic, pls let me know because not to have root topic for android 10 beta
Click to expand...
Click to collapse
Root OK, do as topic of Dr same as android 9,
Odin root file of Dr
Reboot recovery
Wipe data
Install Magisk manger
Reboot
Hold Vol+ and power, afterthat power
Auto install addition
Auto reboot
Open magisk manager
Have root
Enjoy
Thanks Dr very much
Hello Samsuns A02s users,
I know this forum section is for Samsung A02s but I did not found Samsung A03s forum here on XDA. But you can still try installing this apps on your A02s.
Here are the Stock Apps extracted from Samsung A03s stock firmware SM-A037F_INS_A037FXXU1AUJ2_fac.zip. (SM-A037F)
For faster downloads I have uploaded files to Google Drive.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Apps
2. Priv Apps
Google banned the access to files due to abusive downloads and removed the files.
To prevent unnecessary downloads I have restricted downloads. Please request for download if you want it.
If anyone want I will upload it to Mega as well.
Hi!
I hope not to bother you, I'm new here and since there isn't a A03s specific forum, maybe I could find some help here.
I have an A03s (SM-A037M) and I want to root it, but as far I know there isn't a TWRP for this model yet and I have never tried other ways. Surfing Google, I have found some tutorials, but I'm not sure how trustworthy they are.
Do you have this device too? If so, have you root it? Hope you can point me on the right direction.
Thank you in advance!
paulthecapybara said:
Hi!
I hope not to bother you, I'm new here and since there isn't a A03s specific forum, maybe I could find some help here.
I have an A03s (SM-A037M) and I want to root it, but as far I know there isn't a TWRP for this model yet and I have never tried other ways. Surfing Google, I have found some tutorials, but I'm not sure how trustworthy they are.
Do you have this device too? If so, have you root it? Hope you can point me on the right direction.
Thank you in advance!
Click to expand...
Click to collapse
You could root by flashing your Patched ap file with Odin.
I know of someone who is building a TWRP.
I built a kernel for him but I'm not sure if it boots
physwizz said:
You could root by flashing your Patched ap file with Odin.
I know of someone who is building a TWRP.
I built a kernel for him but I'm not sure if it boots
Click to expand...
Click to collapse
Thanks for the reply! I have already rooted, but the TWRP will be welcome any time
paulthecapybara said:
Thanks for the reply! I have already rooted, but the TWRP will be welcome any time
Click to expand...
Click to collapse
Try this
wizzROM Creator module
wizzROM Creator module v2 for all Samsung a-series phones Turn any stock or custom OneUI into a QwizzROM or RwizzROM OneUI 2.0 will become QwizzROM OneUI 3.1 will become RwizzROM Debloated ROM with Extras Extras: Battery charge limit Clean...
forum.xda-developers.com
Hello. How to make 'OEM Unlock' appear in developer options. Samsung A03S running android version 11.
physwizz said:
You could root by flashing your Patched ap file with Odin.
I know of someone who is building a TWRP.
I built a kernel for him but I'm not sure if it boots
Click to expand...
Click to collapse
please drop a link if the TWRP is finished I will really appreciate it
SoloHyper said:
please drop a link if the TWRP is finished I will really appreciate it
Click to expand...
Click to collapse
Unfortunately his pc is broken.
But you can install my kernel without it.
Installing physwizz custom kernels
INSTALL AT YOUR OWN RISK
I AM NOT RESPONSIBLE FOR ANY BRICKED PHONES
But I will help any well-mannered person to recover.
A. Preparation
1. Root the phone
2. Compress your patched boot.img to make boot.tar
3. Copy boot.tar to PC
B. Installation
Method 1
Install from twrp
Reboot to recovery
Backup boot and dtbo
Install kernel zip
Reboot
Method 2
Install kernel from terminal.
1. Download magisk module (magic-flash.zip) from https://github.com/Magisk-Modules-Alt-Repo/magic-flash
2. Install module and reboot.
3. Open terminal.
4. Navigate to folder containing kernel.zip.
Use
ls to list contents
and
cd to change directories
5. Type su
6. Type flash kernel_name.zip
7. Reboot
Method 3
Using ADB
Install adb tools on pc
Connect to PC
Copy zip file to adb folder on pc
Open terminal on pc
Navigate to adb folder
Type
adb sideload file-name.zip
Method 4
Using boot.img
Install AIK Mobile from magisk modules
Use rootexplorer to access
/data/local/AIK-MOBILE
Add patched boot.img and tap unpackimg.sh
Exit the folder and return to see the files.
Edit the files (eg to add a new Image
rename Image to boot.img-zImage and insert in split-image folder)
Tap repackimg.sh
Rename new_image.img to boot.img
Compress boot.img to boot.tar
Copy boot.tar to PC
Reboot phone to download mode
Install boot.tar from odin
AIKLink
Physwizz Collection
Install from magisk modules Use rootexplorer to access /data/local/AIK-MOBILE Add boot.img or recovery.img and tap unpackimg.sh Exit the folder and return to see the files. Edit the files (eg to add a new Image rename Image to boot.img-zImage and insert in split-image folder) Tap repackimg.sh
t.me
C. Removal
Method 1
Reboot to recovery
Restore boot and dtbo
Reboot
Method 2.
Reboot phone to download mode
Install patched boot.tar from odin
@physwizz
paulthecapybara said:
Thanks for the reply! I have already rooted, but the TWRP will be welcome any time
Click to expand...
Click to collapse
hey could you link the guide or whatever and how you rooted it? its the same here i cant find that much information
how extracted stock app from stock ROM?
is can extracted without PC?
Yagami1807 said:
how extracted stock app from stock ROM?
is can extracted without PC?
Click to expand...
Click to collapse
Not without PC.