{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
***Disclamer I am not responsible for any damage you made to your device. You have been warned.***
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. Along with including some tweaks that I personally made.
crDroid Features
My Additions:
1. Wichaya8's GCam 8.1 - Thanks to @VortexHD for his GCam 8.1 Config
2. Swan Stable Kernel (Thanks to @AShiningRay)
Flashing Instructions:
Note: Your device must have TWRP installed.
First time installation:
1. Wipe System, Data, Dalvik/ART Cache, and Cache (format data if your previous ROM was password protected)
2. Flash the ROM corresponding with your LG G5 variant
If you chose to not use Gapps install the Gcam-Services-Provider app.
3. Reboot
Update installation:
1. Flash the ROM corresponding with your LG G5 variant
2. Wipe Davlik/ART Cache and Cache (optional)
Note: I highly recommend checking if zram is properly allocated. Download the RamTruth app and make sure swap is 3gb, if not you must clean flash to fix it.
Bugs/Issues
1. Gapps not working
2. No Wifi Calling, 5ghz hotspot or VoLTE (don't ask about it, it's unlikely to ever work as LG/Cell Carriers have locked down the VoLTE drivers)
3. Voice calls are not working
4. You tell me
Downloads
Credits
@xxseva44 - Huge Thanks as my trees are based off of his
@AShiningRay
@cstark27
@Stealth1226
@lybxlpsv
@npjohnson
@tre123456
@VortexHD
Sources
Swan Stable Kernel
G5/V20-Variants
g5-common
lge-common
msm8996-common
Vendor Files
Donation
If you can please consider donating.
Status:
Last Updated: 08-23-2022
Kernel Version: 3.18
Status: Stable
GCam Config
For Best results an xml config for GCam is Highly recommended
1. Download the config attached to this thread.
2. Open File Manager and create a folder called GCam then inside that folder make another folder called Configs8.
3. Open GCam and double tap on the black area next to the shutter button and press restore.
4. Your Config is now selected and will become the default settings in GCam whenever you open the app.
How to pass SafteyNet
Within Magisk select "Systemless Hosts" to add the module
Enable "Enfore DenyList"
Select "Configure DenyList"
Tap the three dots in the top right corner and enable "Show System"
Find and Select "microG Services Core" then toggle "com.google.android.gms" and "com.google.android.gms.unstable"
Open the "microG Settings" app and test SafteyNet
Most apps requiring SafteyNet should now be working.
Hello, is it possible to get a version of this ROM without MicroG pre installed? I'd like to try and use MindTheGApps instead in order to attempt to get some level of GApps working, and I'm not sure I can flash directly over MicroG.
K14_Deploy said:
Hello, is it possible to get a version of this ROM without MicroG pre installed? I'd like to try and use MindTheGApps instead in order to attempt to get some level of GApps working, and I'm not sure I can flash directly over MicroG.
Click to expand...
Click to collapse
Unfortunately Gapps are broken on crDroid right now so Gapps won't work properly. That's why I added microg, it's just a work around.
ROMSG said:
Unfortunately Gapps are broken on crDroid right now so Gapps won't work properly. That's why I added microg, it's just a work around.
Click to expand...
Click to collapse
Interesting. Didn't realise it was currently broken on v7 (never used v7, currently running MTG jut fine on v8.4 on a different device). Thank you for the information.
I WANT TO TRY OUT THIS ROM BUT I HAVE A BUNCH OF GAMES THAT REQUIRE GOOGLE PLAY GAMES INSTALLED IS THERE A WORKAROUND FOR THAT
abdoistheone said:
I WANT TO TRY OUT THIS ROM BUT I HAVE A BUNCH OF GAMES THAT REQUIRE GOOGLE PLAY GAMES INSTALLED IS THERE A WORKAROUND FOR THAT
Click to expand...
Click to collapse
Sadly no
Update
A Play Store workaround has been figured out. Go to this link and install Aurora Store it's an alt play store app and has the same apps as the play store. It is also is much faster on older devices. Learn more on their XDA thread.
TY SO MUCH FOR LOOKING THAT UP FOR ME I WILL READ SOME OPINIONS & AFTER THAT I WILL TEST THIS ROM & REPORT BACK TO YOU
I JUST FINISHED TESTING ROM ALONG WITH AURORA STORE I ADDED MY GOOGLE ACCOUNT NORMALLY ON MICRO G SETTINGS & INSTALLED GOOGLE PLAY GAMES FROM AURORA BUT COULDN'T LOGIN ON MY GAME USING IT (ERROR MESSAGE) ANYWAY I WILL KEEP CHECKING FOR A FIX TO THIS PROBLEM ONLINE .
I JUST HAVE A HUMBLE REQUEST FROM YOU IF U CAN PLZ UPLOAD THE KERNEL YOU USED IN THIS ROM TY SO MUCH ROMSG FOR UR TIME AND EFFORT
abdoistheone said:
I JUST FINISHED TESTING ROM ALONG WITH AURORA STORE I ADDED MY GOOGLE ACCOUNT NORMALLY ON MICRO G SETTINGS & INSTALLED GOOGLE PLAY GAMES FROM AURORA BUT COULDN'T LOGIN ON MY GAME USING IT (ERROR MESSAGE) ANYWAY I WILL KEEP CHECKING FOR A FIX TO THIS PROBLEM ONLINE .
I JUST HAVE A HUMBLE REQUEST FROM YOU IF U CAN PLZ UPLOAD THE KERNEL YOU USED IN THIS ROM TY SO MUCH ROMSG FOR UR TIME AND EFFORT
Click to expand...
Click to collapse
i dont have any flashable zips for kernel but its called SwanKernel and its from the v20 forum. What variant do you have i can try and send your a boot.img
i have the h830 but what can i do with boot.img i mean is it flashable in twrp ?
abdoistheone said:
i have the h830 but what can i do with boot.img i mean is it flashable in twrp ?
Click to expand...
Click to collapse
Yes you can flash it in twrp. Just select install. Install image and select the boot.img and make sure you select boot image when prompted. You could brick your phone if you don't.
I JUST OPENED THE LATEST LINEAGE 18.1 ZIP FILE & I FOUND THAT IT INCLUDE BOOT.IMG CAN I REPLACE THAT WITH THE ONE U GAVE ME
abdoistheone said:
I JUST OPENED THE LATEST LINEAGE 18.1 ZIP FILE & I FOUND THAT IT INCLUDE BOOT.IMG CAN I REPLACE THAT WITH THE ONE U GAVE ME
Click to expand...
Click to collapse
You could but they are different kernels. Lineage uses the stock lg kernel while my crDroid uses swan kernel. Which has battery and heat improvements
I WANT TO USE LINEAGE ALONG WITH SWAN KERNEL WILL BOOT.IMG PROVIDE THAT FOR ME
abdoistheone said:
I WANT TO USE LINEAGE ALONG WITH SWAN KERNEL WILL BOOT.IMG PROVIDE THAT FOR ME
Click to expand...
Click to collapse
Yes
OK WILL TRY ASAP & REPORT BACK ...MAN I POSTPONED MY DAILY MOBILE GAMING JUST TO TRY THAT BUT THIS KERNEL ABSOLUTELY WORTH IT
abdoistheone said:
OK WILL TRY ASAP & REPORT BACK ...MAN I POSTPONED MY DAILY MOBILE GAMING JUST TO TRY THAT BUT THIS KERNEL ABSOLUTELY WORTH IT
Click to expand...
Click to collapse
Hi, does it work?
Issues i found with this crDroid Rom is, that double tapping does not wake up the phone (but there is an option for that) and the phone immediatly went off at 5% battery when i started the cam app. I thought that the phone should shut down slowly, right?
So maybe i have to reformat the battery or something to work correctly with this rom?
Btw. why do this rom has Go Gallery when it is degoogled?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Features (click here)
Screenshots in the next post.
Flashing Instructions:
Pre-installation & other downloads:
OrangeFox R11.0 (it's MANDATORY) - Download from here
AOSP Repartition script - Download from here
GApps: ARM64 > 10 > Pico - Download from here
Magisk 21.4 or newer for root - Download from here
Installation:
Enter to recovery mode and make a backup of your EFS & Modem (recommend).
Go to the Files tab and flash "Repart-AOSP10-exynos7870-20210810.zip". The recovery will auto-reboot.
Now, go to the Trash Bin and then go to the "Format data" tab, type yes and the tick to format data.
Go to the Wipe tab, select SYSTEM, CACHE, DALVIK, VENDOR, DATA and INTERNAL STORAGE, then swipe the bar.
Install the crDroidAndroid-10.0-xx-xx-v6.xx.zip
Install the GApps zip
Install Magisk (optional)
Reboot and wait. Without GApps, it boot in 15s. With Pico GApps, it boot on 1min 5s.
Done!
Download:
ROM: https://www.androidfilehost.com/?fid=7161016148664783753
Known issues:
- Frontal Flash
- Bluetooth Calls
- VoLTE (impossible in Samsung devices)
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/
ROM OS Version: Android 10
ROM Kernel: Linux 3.18
IMPORTANT, PLEASE READ THIS
This is a ROM built from source and not a GSI!
Fix Camera stretch & force close for some camera apps
You can do it editing /vendor/build.prop file using MiXplorer (you’ll need ROOT).
Search for the line “vendor.camera.hal1.packagelist”
After the = are the name of different apps. Delete one of these and put the package name of the app that you want to fix. For example, com.facebook.orca is the Facebook package name.
Per default, the ROM comes with Whatsapp, ZOOM, Snapchat and Instagram added. Maximum 4 Apps are allowed in this line and must be separated by comma ",".
If you don’t understand, open this link to see visual steps.
Fix Camera stuck
Sometimes, the camera can get inaccessible if an app was failed. If it happen, follow this:
Install this app. Open it and tap "Kill camera", then give it ROOT permissions. Done! Camera is working again.
Take in mind that if the camera is broken and you didn't do this, the audio in calls maybe not work.
GCam
This ROM can run GCam. Download a modded version for Exynos HERE. Thanks to Leonardo Estacio for his mod.
Games: this ROM works so good for gaming and can run ARM64 apps/games. If you feel lags, go to Settings > Battery > Battery Saver and performance > Performance Profile and set it to High Performance.
Video Review: if you want to see gaming performance and how this ROM are, you can watch this review video of the ROM in the J7 2016 (the ROM is the same for other Exynos7870 variants):
For close, i want to give a huge thanks to @Astrako - Without him this ROM haven't be possible <3
Some screenshots
Battery backupBattery backup in this ROM is very good! Here some screenshots (have in mind your device can have different SoT times due the battery age):
Recommended camera: Google CameraGO
Changelog:
android_vendor_crDroidOTA/changelog_j7xelte.txt at 10.0 · crdroidandroid/android_vendor_crDroidOTA
OTA configuration for crDroidOTA (make your device official) - android_vendor_crDroidOTA/changelog_j7xelte.txt at 10.0 · crdroidandroid/android_vendor_crDroidOTA
github.com
===== 10-08-2021 =====
- Update to crDroid 6.21 - August security patch
- Fixed SafetyNet attestation (enable Magisk Hide if Magisk is installed)
- ROM now fits on smaller system partitions [min 2,26GB]
===== 17-04-2021 =====
- crDroid 6.17
- Fixed Live Display
- Added Night Light
- April Security Patch
- Deleted ConfigStore hal
===== 11-02-2021 =====
- crDroid 6.15 build
===== 24-01-2021 =====
- Fixed offline charging
- Added vibration intensity control
- First official build
===== 19-01-2021 =====
- Latest crDroid sources (v6.14 with January security patch)
- Initial build
there is some problem with the camera app and also front flash doesnt work otherwise a good andriod q rom
I don't hear caller voice ,WiFi hotspot not working,this ROM don't adjust with previously crdroid data make bootloop,please fix these issues.
Device : j7velte/j701f
Android ver : crdroid 6.14 ,10.0
fahad15090 said:
I don't hear caller voice ,WiFi hotspot not working,this ROM don't adjust with previously crdroid data make bootloop,please fix these issues.
Device : j7velte/j701f
Android ver : crdroid 6.14 ,10.0
Click to expand...
Click to collapse
Calls: it only happens if the camera get crashed. See the info post.
WiFi hotspot is working, here the screenshots:
The ROM MUST BE installed with a CLEAN FLASH. So the problem is in you, that didn't follow the steps.
Also, i can't fix anything if you don't provide a logcat.
GonicTEAM said:
Calls: it only happens if the camera get crashed. See the info post.
WiFi hotspot is working, here the screenshots:
View attachment 5207995View attachment 5207997
The ROM MUST BE installed with a CLEAN FLASH. So the problem is in you, that didn't follow the steps.
Also, i can't fix anything if you don't provide a logcat.
Click to expand...
Click to collapse
firstly this rom don't adjust with previously working data, I wipe all thing and then fresh install, for me wifi hotspot working only one time when install and stop working after a second or third reboot, also don't work with other vendor I try to fix this problem by flashing other vendor but nothing again boot loop.
currently, I don't use crdroid and don't have logcat
fahad15090 said:
firstly this rom don't adjust with previously working data, I wipe all thing and then fresh install, for me wifi hotspot working only one time when install and stop working after a second or third reboot, also don't work with other vendor I try to fix this problem by flashing other vendor but nothing again boot loop.
currently, I don't use crdroid and don't have logcat
Click to expand...
Click to collapse
Why u changed the vendor? no sense. it's a ROM, not a GSI.
You can try if in LineageOS it's working fine for u.
So i will build crDroid 6.15 when crDroid release it, you can come back to this post in 20 days aprox to try this newer version.
anyway, thanks for try the ROM!
GonicTEAM said:
Why u changed the vendor? no sense. it's a ROM, not a GSI.
You can try if in LineageOS it's working fine for u.
So i will build crDroid 6.15 when crDroid release it, you can come back to this post in 20 days aprox to try this newer version.
anyway, thanks for try the ROM!
Click to expand...
Click to collapse
because i fix hotspot problem in crdroid v6.7 using H-Vendor
Sir, to replace the Live Display that does not work, I recommend this mini tutorial to activate the Google night filter, you just have to decompile the Framework-res, find the line you see in the image and replace the "false" with "true" , compile the framework-res and voila, you will see that in Settings the Live Display has been replaced by the night filter and the reading function is also activated.
Línea: <bool name = "config_nightDisplayAvailable"> verdadero </bool>
Full source: https://forum.xda-developers.com/t/...on-touchwiz-roms-with-on-off-setting.3861515/
There are extra steps on installing magisk on Samsung devices on github which includes flashing the latest rom. Should I do it first?
XCongoAlpha said:
There are extra steps on installing magisk on Samsung devices on github which includes flashing the latest rom. Should I do it first?
Click to expand...
Click to collapse
No, you only need to follow the instructions
(Repartition, format data, wipes, crDroid, Gapps, and if you install last magisk, first rename Magisk.apk to magisk.zip and flash)
Hey the OS is great..... but 4g volte is not working(in india)
Can you resolve this issue
@GonicTEAM
@GonicTEAM I cannot see the credits. At least give proper credits to Astrako.
Ctrl F: Astrako
You will see it in 1st comment
Very cool room, but you can't hear the interlocutor and me during a call
AuSH007 said:
Hey the OS is great..... but 4g volte is not working(in india)
Can you resolve this issue
@GonicTEAM
Click to expand...
Click to collapse
Sublemator said:
Very cool room, but you can't hear the interlocutor and me during a call
Click to expand...
Click to collapse
Hi! Both problems can be resolved placing the SIM in the SIM Card Slot 1.
Slot2 has some problems for now.
Cant flash gives error 7
Please help I think I did a mistake and now system cache and data is 0 mb i can not change their fs or cant repair I can't load a backup to please help me @GonicTEAM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github Repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Screenshots here
Flashing Instructions:
Pre-installation & other downloads:
OrangeFox R11.0 (it's MANDATORY) - Download from here
Repartition script - Download from here
GApps: ARM64 > 10 > Pico - Download from here
Magisk 21.4 or newer for root - Download from here
Installation:
Enter to recovery mode and make a backup of your EFS & Modem (recommend).
Go to the Files tab and flash "LOS17.1-Repartitioner-exynos7870.zip". The recovery will auto-reboot.
Now, go to the Trash Bin and then go to the "Format data" tab, type "yes" and the tick to format data.
Go to the Wipe tab, select SYSTEM, CACHE, DALVIK, VENDOR, DATA and INTERNAL STORAGE, then swipe the bar.
Install the lineage-17.1-xx-UNOFFICIAL-j7velte.zip
Install the GApps zip
Install Magisk (optional)
Reboot and wait. Without GApps, it boot in 15s. With Pico GApps, it boot on 1min 5s.
Done!
Download:
ROM: https://www.androidfilehost.com/?fid=17248734326145727026
Known issues:
- Frontal camera stretched for some apps (Instagram, Snapchat & Whatsapp don't have this problem). See second post for more info.
- LineageOS LiveDisplay
- Frontal Flash
- Bluetooth Calls
- VoLTE
Sources:
Kernel: github.com/samsungexynos7870/android_kernel_samsung_exynos7870/
ROM OS Version: Android 10
ROM Kernel: Linux 3.18
IMPORTANT, PLEASE READ THIS
This is a ROM built from source and not a GSI!
Fix Camera stretch & force close for some camera apps
You can do it editing /vendor/build.prop file using MiXplorer (you’ll need ROOT).
Search for the line “vendor.camera.hal1.packagelist”
After the = are the name of different apps. Delete one of these and put the package name of the app that you want to fix. For example, com.facebook.orca is the Facebook package name.
Per default, the ROM comes with Whatsapp, ZOOM, Snapchat and Instagram added. Maximum 4 Apps are allowed in this line and must be separated by comma ",".
If you don’t understand, open this link to see visual steps.
Fix Camera stuck
Sometimes, the camera can get inaccessible if an app was failed. If it happen, follow this:
Install this app. Open it and tap "Kill camera", then give it ROOT permissions. Done! Camera is working again.
Take in mind that if the camera is broken and you didn't do this, the audio in calls maybe not work.
GCam
This ROM can run GCam. Download a modded version for Exynos HERE. Thanks to Leonardo Estacio for his mod.
Games: this ROM works so good for gaming and can run ARM64 apps/games. If you feel lags, go to Settings > Battery > Battery Saver and performance > Performance Profile and set it to High Performance.
For close, i want to give a huge thanks to @Astrako - Without him this ROM haven't be possible <3
Changelog
===== 02-02-2021 =====
- Initial build
Thanks for this ROM, are you planing to mantain it?
Just asking for the monthly security patches.
XDAUser_01 said:
Thanks for this ROM, are you planing to mantain it?
Just asking for the monthly security patches.
[BUG]: GPS is not working on SM-J701MT, tested with SatStat.
Michael von Glasow / satstat · GitLab
Android Location, Sensor and Radio Network Status
gitlab.com
Click to expand...
Click to collapse
Hi, GPS is working fine. Try get out of your house and try it on the street. My testers have tried and have no problems!
GonicTEAM said:
Hi, GPS is working fine. Try get out of your house and try it on the street. My testers have tried and have no problems!
Click to expand...
Click to collapse
Yes, you're right, my bad. GPS works just fine, great job.
phone App Cuts Audio After 3 seconds Exactly, idk other carriers but Airtel, from India..
papaimitho55 said:
phone App Cuts Audio After 3 seconds Exactly, idk other carriers but Airtel, from India..
Click to expand...
Click to collapse
mvm the call app started working normally after installing the call recorder from magix
sometimes charging is offline, any fix patch?
some way to share my wifi signal with other devices.
Thank you so much man!! This ROM such so fast and smooth, a perfect upgrade over stock OneUI!!
Lack of VoLTE is being suffered but it's amazing nonetheless!!
ElectroLion said:
Thank you so much man!! This ROM such so fast and smooth, a perfect upgrade over stock OneUI!!
Lack of VoLTE is being missed but it's amazing nonetheless!!
Click to expand...
Click to collapse
VoLTE fix would be really appreciated though
My first time flashing a custom ROM and rooting! What a scary rollercoaster! Thanks!
edit: There are extra steps on installing magisk on Samsung devices on github. Should I do it first?
XCongoAlpha said:
My first time flashing a custom ROM and rooting! What a scary rollercoaster! Thanks!
edit: There are extra steps on installing magisk on Samsung devices on github. Should I do it first?
Click to expand...
Click to collapse
Just install magisk normally (flash magisk through recovery and verify success through manager app)
@GonicTEAM I cannot see the credits. At least give proper credits to Astrako.
@GonicTEAM Error 7 Rom , pls help
vendor failed j7 CORE
E1001: Failed to update system image and E2001: Failed to update vendor image.
Katsuki1 said:
vendor failed j7 CORE
Click to expand...
Click to collapse
Everything works fine if you followed the steps properly. I'm also on j7core and it works even in the first time I tried it.
Katsuki1 said:
@GonicTEAM Error 7 Rom , pls help
Click to expand...
Click to collapse
Try using orangefox recovery. Also, if you are flashing from stock, wipe internal storage as well.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
Encrypted build
Vanilla build (no gapps)
Selinux enforcing and Safety net passes by default
More Info
Flashing Instructions:
Pre-installation:
OrangeFox(Download from here)
Lineage Recovery (Download from here)
Gapps (Download NikGapps Core from here)
fcrypt-v3 (Download from here)
Frimware is included
CrDroid 8.4 Requires clean flash !!First time installation:
For Encryption
Backup before you begin
Boot into fastboot
Flash Given Lineage Recovery (fastboot flash recovery recovery.img)
Boot into recovery
Format data/factory reset
Apply update >> Apply from ADB
Sideload rom zip & gapps zip (adb sideload rom.zip)
Reboot to system
For Decryption
Backup before you begin
Boot into Recovery
Wipe Dalvik Cache,Cache,System,Vendor and Data
Flash Rom , Gapps & fcrypt-v3
Reboot to system
Update installation:
For Encryption: sideload rom zip & reboot
For Decryption: Flash Rom & fcrypt-v3 & reboot
Sources:
ROM: https://github.com/crdroidandroid
Kernel:Click here
Download:
ROM https://crdroid.net/violet
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/12.1/changelog_violet.txt
Visit official website @ crDroid.net
crDroid violet Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help CrDroid team pay server costs
Donate to help me in development
this rom is very good. are we get any update recenty?
it's been over 1.5 months and no updates.... the ROM seems stable and responsive for now but a monthly security update is much needed.
TechNoMatic said:
it's been over 1.5 months and no updates.... the ROM seems stable and responsive for now but a monthly security update is much needed.
Click to expand...
Click to collapse
Updated 3 day's ago. You need to clean flash 8.4 so won't get a ota notification on previous build .
Download latest build from https://crdroid.net/violet/8
kalmin06 said:
Updated 3 day's ago. You need to clean flash 8.4 so won't get a ota notification on previous build .
Download latest build from https://crdroid.net/violet/8
Click to expand...
Click to collapse
Oh, I'm sorry.. I should've checked the site before commenting.
Huge props to the developer! I'll clean flash tomorrow.
dirty flash from 7.13, all seem fine. nice rom!
I can't find the settings for app lock. Is it available in this version? I'm pretty sure it was available in the 7.X version
brunork said:
I can't find the settings for app lock. Is it available in this version? I'm pretty sure it was available in the 7.X version
Click to expand...
Click to collapse
Long press on home screen> settings> Miscellaneous > hidden & protected apps. Now its a launcher thing
kalmin06 said:
Long press on home screen> settings> Miscellaneous > hidden & protected apps. Now its a launcher thing
Click to expand...
Click to collapse
That's a shame. I'm using Nova Launcher. I tried to switch to the native launcher, lock the apps and switch back to nova but it had no effect (makes sense, since it's a launcher thing)
Great ROM!
Though I am currently facing two issues, one is that if I use a different launcher like the provided crdroid launcher the home glitches, and also the sensors like accelerometer GPS compass, etc. aren't working. Is anyone else facing these problems and if so any solutions?
Thypsos said:
Great ROM!
Though I am currently facing two issues, one is that if I use a different launcher like the provided crdroid launcher the home glitches, and also the sensors like accelerometer GPS compass, etc. aren't working. Is anyone else facing these problems and if so any solutions?
Click to expand...
Click to collapse
1. The launcher may be incompactable or needs module support like quickswitch.
2. This can be occur to serveral reasons.
-did you flash gapps after first boot?. try deleteing /data/misc_de/*/apexdata/com.android.permission/runtime_permissions.xml
or clean flash rom , dont forget flash gapps before first boot.
2nd cause is this may occur if you are coming from a pie based rom
check your sensors using sensorbox app in play.google.com
feel free to use our telegram forum https://tx.me/crdroidviolet
kalmin06 said:
1. The launcher may be incompactable or needs module support like quickswitch.
2. This can be occur to serveral reasons.
-did you flash gapps after first boot?. try deleteing /data/misc_de/*/apexdata/com.android.permission/runtime_permissions.xml
or clean flash rom , dont forget flash gapps before first boot.
2nd cause is this may occur if you are coming from a pie based rom
check your sensors using sensorbox app in play.google.com
feel free to use our telegram forum https://tx.me/crdroidviolet
Click to expand...
Click to collapse
I was using MIUI stock before this and while in the stock I had all the sensors available in the sensor box app.
And I did flash gapps, but not after first boot but rather after flashing the crdroid Rom itself.
I will reflash the Rom and will update you shortly!
Thypsos said:
I was using MIUI stock before this and while in the stock I had all the sensors available in the sensor box app.
And I did flash gapps, but not after first boot but rather after flashing the crdroid Rom itself.
I will reflash the Rom and will update you shortly!
Click to expand...
Click to collapse
Fixed Update!
I had to revert back to my stock MIUI with the official fastboot Rom to regain sensor functionality, and after flashing crDroid again, it's working fine, and the launcher issue is gone too.
Hi, great ROM, thanks!
Some minor issue: the apps are not quite sorted; regardless of launcher (even default one), the list is sorted until the last ones:
...
SatStat
Telegram
Waze
Contacts
Files
Settings
What are "Contacts", "Files" and "Settings" doing there and how do I get them to their proper places?
Is anyone else facing stability issues? I have had frequent crashes of the system UI forcing a restart.
after upgrading from 8.2 to 8.5, the mobile network signal became very weak
Is Violet still supported?
Thank you so much for continuing supporting this phone with a google-less option!
Thank you
Can someone help me out: I'm trying to wipe my phone after installing this ROM (messed up some things so basically reinstalling).
However if I try to wipe the data in Orange Fox, I get a TON of errors
Here's the last one in an incredibly long list (takes two minutes to scroll through): Error opening: '/data/ssh/OFJF8xpsY7U8SodJ9qcy6B' (Operation not permitted)
There are a ton of files in the sdcard that I can't open or access or do anything with.
I've never encountered this type of problem before, how do I fix it exactly?
Edit: To clarify, I can't wipe the data partition and I don't know why that is.
Is there anyway to disable the auto app suggestion in the dock at the bottom of your screen?
I like having only 4 apps in there and like the gap for the visual break it gives me. But its quite annoying that the last used app is automatically going in there.
Solved: Click on the home screen - settings - misc - last option (I think its called suggestions)
crDroid-v9.0 android 13.0
INSTALLATION.
1. download boot image and crDroid-v9.0 zip file
2. reboot bootloader
3. fastboot -w
4. fastboot flash boot boot.img --slot all
5. reboot into recovery
6. sideload zip file (adb sieload zip file)
7. reboot to recovery if you want to install gapps
8. reboot system
DOWNLOADS
official builds can be found here = https://sourceforge.net/projects/crdroid/files/coral/9.x
boot.img & build.zip = https://www.androidfilehost.com/?w=files&flid=336916
GAPPS
13.0 = https://androidfilehost.com/?fid=14871746926876840643
CREDITS
crDroid devs
LineageOS Team
Alessandro Astone
SOURCES
Kernel: https://github.com/putzwon/android_kernel_google_msm-4.14
Device tree: https://github.com/putzwon/android_device_google_coral
Vendor: https://github.com/putzwon/proprietary_vendor_google_coral
ElmyraService: https://github.com/putzwon/android_packages_apps_ElmyraService
putzwon said:
crDroid-v9.0 android 13.0
INSTALLATION.
1. download boot image and crDroid-v9.0 zip file
2. reboot bootloader
3. fastboot -w
4. fastboot flash boot boot.img --slot all
5. reboot into recovery
6. sideload zip file (adb sieload zip file)
7. reboot to recovery if you want to install gapps
8. reboot system
DOWNLOADS
boot.img & build.zip = https://www.androidfilehost.com/?w=files&flid=336916
GAPPS
13.0 = https://androidfilehost.com/?fid=14871746926876840643
CREDITS
crDroid devs
LineageOS Team
Alessandro Astone
SOURCE
device=https://github.com/LineageOS/android_device_google_coral
kernel=https://github.com/LineageOS/android_kernel_google_msm-4.14
vendor=https://github.com/TheMuppets/proprietary_vendor_google_coral
Click to expand...
Click to collapse
what about flame? is it updated build?
cRdroid rocks the PX4!!! Thank you putzwon!!!
what the different with this version..?
link
Thank you so much sir
putzwon said:
crDroid-v9.0 android 13.0
INSTALLATION.
1. download boot image and crDroid-v9.0 zip file
2. reboot bootloader
3. fastboot -w
4. fastboot flash boot boot.img --slot all
5. reboot into recovery
6. sideload zip file (adb sieload zip file)
7. reboot to recovery if you want to install gapps
8. reboot system
DOWNLOADS
boot.img & build.zip = https://www.androidfilehost.com/?w=files&flid=336916
GAPPS
13.0 = https://androidfilehost.com/?fid=14871746926876840643
CREDITS
crDroid devs
LineageOS Team
Alessandro Astone
SOURCE
device=https://github.com/LineageOS/android_device_google_coral
kernel=https://github.com/LineageOS/android_kernel_google_msm-4.14
vendor=https://github.com/TheMuppets/proprietary_vendor_google_coral
Click to expand...
Click to collapse
thaaaaaaaaaaaaaaaaaaaaaanks
can i just boot into twrp and install this firmware as usual? wipe system/wipe data/install crdroid/reboot? Or does it have to be done exactly as instructed?
very good
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
anonras said:
what the different with this version..?
link
Click to expand...
Click to collapse
This is the latest Android 13 (crDroid-v9.0 android 13.0), your link is the older 12.1 Android
vlbr said:
can i just boot into twrp and install this firmware as usual? wipe system/wipe data/install crdroid/reboot? Or does it have to be done exactly as instructed?
Click to expand...
Click to collapse
It might work, but stick with OP steps, those 110% WORK, but up to you. I gave up on TWRP when A/B partitions came out and chose to just stick with and use stock ROM recovery. That will always work, TWRP, maybe not so much, IDK, it might, but you wont get the same type of help if you choose your own path (TWRP).
Also, just an FYI on nomenclature, this isn't firmware, but ROM, firmware contains all partitions, drivers, ETC., this is just the OS (ROM).
Thank good bro. Please you can create a version same this version V9, but face id use camera, same same this version 7.2 so you made ( https://androidfilehost.com/?w=files&flid=333516). Because i not enough money to buy the normal 4xl, i just enough to buy one no face id. Thank you for your time
tonyhieu said:
Thank good bro. Please you can create a version same this version V9, but face id use camera, same same this version 7.2 so you made ( https://androidfilehost.com/?w=files&flid=333516). Because i not enough money to buy the normal 4xl, i just enough to buy one no face id. Thank you for your time
Click to expand...
Click to collapse
huh?
GROOVYJOSHCLARK said:
huh?
Click to expand...
Click to collapse
My 4XL can't face id 3d as normal different 4XL. So have a way to use face unlock, It's using font camera to use face unlock.
tonyhieu said:
My 4XL can't face id 3d as normal different 4XL. So have a way to use face unlock, It's using font camera to use face unlock.
Click to expand...
Click to collapse
Interesting, this is new to me (unable to scan face for a PX4), what type of pixel 4 XL is it then? Or are there hardware issues I missed? I cant comment on this fix (I am not the dev here) but I might be able to help you once I know the scope of work.
@putzwon, I have used this OS (ROM) since Friday, and thoroughly testing EVERYTHING! WOW, I am literally floored at how well EVERYTHING works!!
I have NO ISSUES, NO BUGS, NO SHOWSTOPPERS, nada. Even Now Playing works, I am floored by all of this! It is amazing, and I rarely say that about a ROM (with no bugs also being reported - at the same time), and as I noted earlier, in the past, cRdroid wasn't great for me (random bugs, and/or missing features I rely on). NOT this version, this version IS GREAT FOR ME, I have EVERY SINGLE possible tweak I want/need/use, PLUS functional services / RIL (Radio Interface Layer) I.E. CALLs/TXT/MMS, PLUS no bugs, or FCs, or anything that would keep me away!
Normally, I use LOS, and LOS only (while testing all other ROMs for users and myself), but always landing back with LOS, not this time! I am STICKING WITH cRdroid for the foreseeable future, it is my DailyDriver and will remain so until something changes (but doubtful at this point)!! I have everything I need, baked right into the ROM, so I don't even need my LSPosed modules (other than SafetyNetFix once ROOT'ng)!
EXTREMELY WELL DONE and THANK YOU FOR THIS ROM!!!! For the rest of XDA users, this ROM WORKS! It works EXTREMELY WELL, is bug-free (from my extensive testing and standpoint). I haven't found any bugs yet (not a single one)!
GROOVYJOSHCLARK said:
Interesting, this is new to me (unable to scan face for a PX4), what type of pixel 4 XL is it then? Or are there hardware issues I missed? I cant comment on this fix (I am not the dev here) but I might be able to help you once I know the scope of work.
Click to expand...
Click to collapse
Yes, this is a type of 4XL, it's cheaper to 20% .
Installed it yesterday and almost everything is working perfectly. The only feature that seems to be missing Soli which is a shame since it's a fun novelty.
best rom ever love you
thaaanks
Thanks for the rom. Perhaps anyone could advice me if there is an easy switch from LOS 20 to this rom? If possible I'd like to avoid installing all apps again ... including the "security" features for a couple of sensitiv apps like bank apps.
Perhaps someone knows if restoring a swiftbackup would work.
Thanks
ojessie said:
Thanks for the rom. Perhaps anyone could advice me if there is an easy switch from LOS 20 to this rom? If possible I'd like to avoid installing all apps again ... including the "security" features for a couple of sensitiv apps like bank apps.
Perhaps someone knows if restoring a swiftbackup would work.
Thanks
Click to expand...
Click to collapse
it is easy
i do it everytime I flash a custom rom
you need to root your phone using magisk
then instal
Migrate - ROM backup 5.0.1from play store
open it and take a full backup of your installed apps
copie this backup to your laptop
and after flashing this perfect rom
copie the backup from the laptop to the phone
and root the phone again
and instal
Migrate flasherfrom play store
open it
and flash the file you backed up
this way you will have allll your apps including your banking apps with all your data
you will not have to instal anything twise...
good luck
it is easy
don't worry..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn
Flashing Instructions:
First time installation:
flash OrangeFox-R11.1_2_FBEv1-Unofficial-raphael.zip (you can use any recovery you want but the provided one gives you no problems doing OTA, you are warned)
reboot into recovery
in recovery - Format data
if you want to stay on EXT4 for the data partition do nothing and flash the rom, if you want your data partition to be in F2FS then go to 'manage partitions' click 'Data' then 'Change FS' then 'F2FS'
ROM (Download from here)
gapps (Download from here)
KernelSU - (Download from here)
move these to the root of your device
flash rom and gapps, reboot enjoy!
Update installation:
just update if your device asks for it
make sure to use a gapps package with a recovery/survival script
Sources:
ROM: https://github.com/crdroidandroid
Kernel: kernel url
Download:
ROM https://crdroid.net/raphael
Changelog: https://crdroid.net/raphael/9#changelog
Known issues:
Tell me
Visit official website @ crDroid.net
crDroid MI9T Pro Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
#
Screenshots ?
Is rom decrypted ?
credfa said:
Screenshots ?
Click to expand...
Click to collapse
check the website
T3sla said:
Is rom decrypted ?
Click to expand...
Click to collapse
no
firebird11 said:
no
Click to expand...
Click to collapse
So i installed yesterday twice, once with orangefox and once with the recovery provided here.Both times i had the same problem : Quick setting tiles had only 4 icons and the edit button was missing so couldn't add more.Also the search button from settings was missing.I don't know if i am the only one who faced this problem, any idea what went wrong?Thanks!
crDroid Updates
New crDroid update for MI9T Pro 🔖 Codename: raphael 📱 crDroid version: 9.0 📅 Build date: 20230103 ✅ MD5: 9CA6F8443B8F11AD269D7A571672398D 🧑💻 Maintainer: Hildo Boerboom
t.me
I'm having some issue wherein some apps just wouldn't start. They don't crash but it seems they just get force closed/killed immediately. I tried doing a MatLog but I'm not sure if the information is enough. I hope you can help solve the problem. Thank you!
Edit: Forgot to mention I only flashed Firmware, ROM, NikGApps, Magisk, and DFE
ClockUpEx said:
I'm having some issue wherein some apps just wouldn't start. They don't crash but it seems they just get force closed/killed immediately. I tried doing a MatLog but I'm not sure if the information is enough. I hope you can help solve the problem. Thank you!
Edit: Forgot to mention I only flashed Firmware, ROM, NikGApps, Magisk, and DFE
Click to expand...
Click to collapse
probably because your data partition is in f2fs, you need to format it to ext4 or wait for the next release
firebird11 said:
probably because your data partition is in f2fs, you need to format it to ext4 or wait for the next release
Click to expand...
Click to collapse
I'm on ext4. I reflashed everything I'll observe if it happens again. Seems like a problem with gms because after clearing data of Play Services, I can start those apps but it stops working again after some time.
Hi, Great ROM, but I found some issues:
- In Wallpapers and Styles section of settings there are many wallpaper palettes (in groups of 4 per page), but all palettes on one given page, when selected, look exactly the same as the first one (others are broken)
- Face Unlock activates on Screen On, even when set to "on swipe up"
- UDFS custom animations are misaligned
- Sometimes "UDFS when screen off" doesn't work even when it's enabled
- Clock in QS is cut off above size 22 dp
Hello everybody.
First of all congratulations for the work.
I have installed according to the guide ROM, NikGApps and DFE.
I have a problem, When I connect the device to the computer, the drive appears, but I can't access the internal memory.
Any ideas?
Thanks
I've been waiting a long time for the return of Crdroid! Thank you!
thecoolkid said:
Hi, Great ROM, but I found some issues:
- In Wallpapers and Styles section of settings there are many wallpaper palettes (in groups of 4 per page), but all palettes on one given page, when selected, look exactly the same as the first one (others are broken)
- Face Unlock activates on Screen On, even when set to "on swipe up"
- UDFS custom animations are misaligned
- Sometimes "UDFS when screen off" doesn't work even when it's enabled
- Clock in QS is cut off above size 22 dp
Click to expand...
Click to collapse
I have the same small problems, without a doubt once they fix that this will be my header rom, the amount of customization it has is incredible, also, I would like to have the option for the tiles to vibrate when touching them, after that, nothing more, all excellent, more optimization I suppose
@firebird11, very nice ROM. Great battery life. Using your build for 2 weeks now and didn't face any problems. Bedankt!
firebird11 said:
on your computer type - adb sideload crDroidAndroid-13.0-xxxxxxxx-v9.x.zip
Click to expand...
Click to collapse
This step doesnt seem to work with the latest(?) version. Tried it with the provided Orangerecovery.
"adb sideload cannot read"
Settler11 said:
This step doesnt seem to work with the latest(?) version. Tried it with the provided Orangerecovery.
"adb sideload cannot read"
Click to expand...
Click to collapse
First you have to enable adb side load in recovery and swipe to activate before running the command in computer
asripath said:
First you have to enable adb side load in recovery and swipe to activate before running the command in computer
Click to expand...
Click to collapse
Thanks, but I know how to sideload... I'm not asking, but saying that sideloading doesn't work with newer builds. I've tested it with the first build and that worked right away.
Hello everyone, one question, does the rom have any important errors? I'm thinking of installing it but it's a headache to configure everything and copy my files and I wanted to ask those who have the rom installed
It would be nice if they updated the information here so that many of us are better informed than by Telegram
Thanks