Related
I've owned my Moto G for a fortnight now and the 3G speeds on it have been dreadful - it peaks at 0.3 download and 0.2 upload. When on wifi it has around 7 download and 1.2 upload. I have no idea why it is so slow. Can anybody give me any suggestions to speed it up?
I supposed you mean 0.3M up and 0.2M down. This is not 3G/HSPA. Perhaps, you are being throttled or just bad network coverage. So that's like 300k down and 200k up.
I have been able to reached 6M down and 1.5M up on unlocked phones on AT&T with HSPA using the non-LTE provisioned wap.cingular APN.
My latest results.
Maybe a faulty unit?
Ask for a replacement from the place you bought it.
maxxblade said:
Maybe a faulty unit?
Ask for a replacement from the place you bought it.
Click to expand...
Click to collapse
I might have to, I've tried pretty much everything else. The only things I haven't tried yet are a factory reset, putting my sim card into another phone and putting a different sim into my 'faulty' phone.
You could try flashing the latest full factory firmware image for your model via fastboot. That will also update the radio. You do not need to unlock Bootloader for this.
http://forum.xda-developers.com/moto-g/4g-development/xt1039-moto-g-4g-stock-firmware-kxb21-t2805619
lost101 said:
You could try flashing the latest full factory firmware image for your model via fastboot. That will also update the radio. You do not need to unlock Bootloader for this.
http://forum.xda-developers.com/moto-g/4g-development/xt1039-moto-g-4g-stock-firmware-kxb21-t2805619
Click to expand...
Click to collapse
My moto g is a tesco one.
I installed the CID getter and it shows this. Is this correct?
MrLRDJ said:
My moto g is a tesco one.
I installed the CID getter and it shows this. Is this correct?
Click to expand...
Click to collapse
Yeah, you are fine. Flash the Tesco firmware image. Or the Retail GB one will work also. The latter is a slightly more recent build.
Hi,
I bought a SM-G930VL (tracphone branded, but verizon compatible) galaxy s7 for a pretty good price, however the advanced and wifi calling were not options (even though verizon told me they were before I purchased). I decided I would try to flash the VZW firmware from sammobile through odin, but it did not work. It originally gave me the ext4 error, but then flashing the csc fixed that. I then flashed the AP file, but it finished very quickly (about 3.5 min) and now will only boot into recovery when powered up.
Is there anything I can do to save my phone, or have I permanently screwed it up?
Thanks
holy sh*t got it working. Flashed the BL, AP, CP, and CSC files and it booted to welcome screen!!
Thanks all (and hopefully this helps anyone in the future who runs into this predicament)
It is currently checking wifi connection so hopefully all is well!
Edit: Is there a way to edit the title? That way this could be maybe help the next person rather than getting ignored.
whatnow275 said:
holy sh*t got it working. Flashed the BL, AP, CP, and CSC files and it booted to welcome screen!!
Thanks all (and hopefully this helps anyone in the future who runs into this predicament)
It is currently checking wifi connection so hopefully all is well!
Edit: Is there a way to edit the title? That way this could be maybe help the next person rather than getting ignored.
Click to expand...
Click to collapse
Hi, want to ask a few questions. were you able to fully flash the Verizon firmware to this model with no issues? The phone is also supposed to be factory unlocked per my connections with reps.
Did the phone fully change to a SM-G930V, showing in settings and in Odin mode?
Yes I was able to fully flash Verizon and I have working wifi calling and advanced calling. In settings it shows up as V not VL as well. As far as I understand it is the exact same hardware just different software running on it
Sent from my iPhone using Tapatalk
whatnow275 said:
Yes I was able to fully flash Verizon and I have working wifi calling and advanced calling. In settings it shows up as V not VL as well. As far as I understand it is the exact same hardware just different software running on it
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Great, i flashed one yesterday for a friend via teamviewer and even changed the model as SM-G930V in odin mode. So I guess due to this the phone has now a locked bootloader and ended up being converted to a full Verizon galaxy S7. Only thing it did not take his Metro PCS sim card. Unsure it would take any other carrier sim cards.
aromerblz said:
Great, i flashed one yesterday for a friend via teamviewer and even changed the model as SM-G930V in odin mode. So I guess due to this the phone has now a locked bootloader and ended up being converted to a full Verizon galaxy S7. Only thing it did not take his Metro PCS sim card. Unsure it would take any other carrier sim cards.
Click to expand...
Click to collapse
Was the boot loader originally unlockable? I was under the impression that all SD versions were locked down right. That's great that you got it to work also!
Sent from my iPhone using Tapatalk
whatnow275 said:
Was the boot loader originally unlockable? I was under the impression that all SD versions were locked down right. That's great that you got it to work also!
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
It seems it was as it allowed me to flash the verizon bootloader and full firmware. Normally tracfones only allow to flash part of a firmware and rejects all bootloader partitions.
Is bootloader locked after flash g930v firmware. Or can I flash back to straight talk?
Cherb1990 said:
Is bootloader locked after flash g930v firmware. Or can I flash back to straight talk?
Click to expand...
Click to collapse
haven't tried flashing back as have no reason for that. To top it off the firmware has not been released yet.
aromerblz said:
haven't tried flashing back as have no reason for that. To top it off the firmware has not been released yet.
Click to expand...
Click to collapse
I'm currently on Verizon switching to T-Mobile this week. Is it possible to flash to G930T? I flashed g930VL to G930V. But wasnt sure if I could. If of the phone would be compatible with T-Mobile
Cherb1990 said:
I'm currently on Verizon switching to T-Mobile this week. Is it possible to flash to G930T? I flashed g930VL to G930V. But wasnt sure if I could. If of the phone would be compatible with T-Mobile
Click to expand...
Click to collapse
There were reports of someone flashing the phone to an SM-G930U (Unlocked US S7). So apparently they are interflashable. I however have not gone to that extent as am yet to get my one to thinker with. I flashed previously to a SM-G930V via teamviewer for a friend. You can search the threads and verify.
Read here:
http://forum.xda-developers.com/tmo...0t1-metro-pcs-flashed-g930t-firmware-t3358941
aromerblz said:
Great, i flashed one yesterday for a friend via teamviewer and even changed the model as SM-G930V in odin mode. So I guess due to this the phone has now a locked bootloader and ended up being converted to a full Verizon galaxy S7. Only thing it did not take his Metro PCS sim card. Unsure it would take any other carrier sim cards.
Click to expand...
Click to collapse
You probably figured it by now, but MetroPCS is the only retarded carrier that locks SIM to IMEI. So if you want to use MetroPCS on any other phone than the one you currently have it on, you need to call customer service and give them your new phone's IMEI. Then your new phone will start working. If you want to switch back to your old MetroPCS phone you need to call them again and give them that IMEI, which is retarded. I don't know why they do that but it's really annoying if you frequently switch phones.
I have a 935V (S7 Edge Verizon) and now have 935U ROM on it using Tracfone. Initially I have Tracfone's Verizon service but I wanted the freedom to easily move from one phone to another so I converted it to a Tracfone-GSM(ATT) and been using it in my Verizon S7 Edge (with 935U ROM) and iPhone SE without any problem.
whatnow275 said:
Hi,
I bought a SM-G930VL (tracphone branded, but verizon compatible) galaxy s7 for a pretty good price, however the advanced and wifi calling were not options (even though verizon told me they were before I purchased). I decided I would try to flash the VZW firmware from sammobile through odin, but it did not work. It originally gave me the ext4 error, but then flashing the csc fixed that. I then flashed the AP file, but it finished very quickly (about 3.5 min) and now will only boot into recovery when powered up.
Is there anything I can do to save my phone, or have I permanently screwed it up?
Thanks
Click to expand...
Click to collapse
Could you add links to everything you used? I have the same model using straight talk and I want to be able to have a backup firmware to flash in case I ever mess up my phone (which seems to be a trend). And have you had any issues at all? Like, does everything work okay?
whatnow275 said:
Hi,
I bought a SM-G930VL (tracphone branded, but verizon compatible) galaxy s7 for a pretty good price, however the advanced and wifi calling were not options (even though verizon told me they were before I purchased). I decided I would try to flash the VZW firmware from sammobile through odin, but it did not work. It originally gave me the ext4 error, but then flashing the csc fixed that. I then flashed the AP file, but it finished very quickly (about 3.5 min) and now will only boot into recovery when powered up.
Is there anything I can do to save my phone, or have I permanently screwed it up?
Thanks
Click to expand...
Click to collapse
I too would like to know if you could please provide links. Im rather new to this, the only other phone ive ever flashed rooted and put custom rom on was a Evo. But alls im looking to do is get my s7 rooted and it would be nice to have it flashed to Verizon first seeing as there root guide is for verison phone and firmware.
Dano5674 said:
I too would like to know if you could please provide links. Im rather new to this, the only other phone ive ever flashed rooted and put custom rom on was a Evo. But alls im looking to do is get my s7 rooted and it would be nice to have it flashed to Verizon first seeing as there root guide is for verison phone and firmware.
Click to expand...
Click to collapse
It's been a very long time but I'll try to remember lol. Been in iPhone land for about a year (now I'm back with the good guys tho )
Help lol
whatnow275 said:
It's been a very long time but I'll try to remember lol. Been in iPhone land for about a year (now I'm back with the good guys tho )
Click to expand...
Click to collapse
I bricked my SM-930VL too and it's not letting me flash anything back to stock. No clue what to do
As of this writing (11/29/2017) this is the latest firmware for the G950U1 att unlocked S8 . I'm leaving this here for reference so people can return to it if/when they need it.
Download, extract, remove .md5 file name off the end of each file, flash.
G950U1UEU2AQK2 (This WILL update your bootloader so after this, no going to QH3 or before. Not that you'd have a reason to)
https://drive.google.com/open?id=1gvQ0kaZTwbEYe2jvuIa05pCvwkS4ddtg
joe3681 said:
As of this writing (11/29/2017) this is the latest firmware for the G950U1 att unlocked S8 . I'm leaving this here for reference so people can return to it if/when they need it.
Download, extract, remove .md5 file name off the end of each file, flash.
G950U1UEU2AQK2 (This WILL update your bootloader so after this, no going to QH3 or before. Not that you'd have a reason to)
https://drive.google.com/open?id=1gvQ0kaZTwbEYe2jvuIa05pCvwkS4ddtg
Click to expand...
Click to collapse
you donnt need to remove the .md5
you will need modded odin though.
mweinbach said:
you donnt need to remove the .md5
you will need modded odin though.
Click to expand...
Click to collapse
You don't need to no, but it speeds up the process. I'm just posting firmware not making a hand holding tutorial. There's enough of those around
Thanks Joe I was tired of returning all the way back to the beginning and getting all those new updates on my unlocked S8
joe3681 said:
You don't need to no, but it speeds up the process. I'm just posting firmware not making a hand holding tutorial. There's enough of those around
Click to expand...
Click to collapse
Yeah and on a Mac you do need to, or it freezes Odin completely
If I flash unbranded FW on a carrier specific device, loke tmo or att for example, would it sim unlock the phone?
If I flash tmo FW on an att s8 would it in turn allow me to use the att original device on tmo? I ask these questions because I feel like it would work for both my questions since flashing the FW flashes both boot, kernel and baseband/radio. The which is needed for signal. Just some theories but would love to know the answers.
Btw, I have a F model S8+ and was planning on buying some US branded devices so I was curious.
this.guy.lol said:
If I flash unbranded FW on a carrier specific device, loke tmo or att for example, would it sim unlock the phone?
If I flash tmo FW on an att s8 would it in turn allow me to use the att original device on tmo? I ask these questions because I feel like it would work for both my questions since flashing the FW flashes both boot, kernel and baseband/radio. The which is needed for signal. Just some theories but would love to know the answers.
Btw, I have a F model S8+ and was planning on buying some US branded devices so I was curious.
Click to expand...
Click to collapse
No, it will not unlock the phone (Note: Verizon phones are factory unlocked and remain that way after a firmware flash)
Yes, you can flash any carriers FW to a US S8 and use it with a different carrier.
So I understand, your saying if I flash att FW to a T-Mobile s8 I can use it on tmobile? If that is the case, to me that's an unlock of sorts tiny book lol. Just wanna make sure is all
Deleted
this.guy.lol said:
So I understand, your saying if I flash att FW to a T-Mobile s8 I can use it on tmobile? If that is the case, to me that's an unlock of sorts tiny book lol. Just wanna make sure is all
Click to expand...
Click to collapse
You can flash att firmware and use it on TMobile but it will still be locked to TMobile. Just running att firmware.
joe3681 said:
You can flash att firmware and use it on TMobile but it will still be locked to TMobile. Just running att firmware.
Click to expand...
Click to collapse
Just realized the typo.....what I meant was, if I flash ATT on a TMO variant I can use ATT while locked to tmo? I'm very unfimiar with combination fw and always opted for the UK models for alot of reasons. Sorry for the confusion of my op question. I know on the s7 and edge if you flashed the US unlocked firmware it not only removed AOL bloat but it unlocked the device. So that is why I ask.
this.guy.lol said:
Just realized the typo.....what I meant was, if I flash ATT on a TMO variant I can use ATT while locked to tmo? I'm very unfimiar with combination fw and always opted for the UK models for alot of reasons. Sorry for the confusion of my op question. I know on the s7 and edge if you flashed the US unlocked firmware it not only removed AOL bloat but it unlocked the device. So that is why I ask.
Click to expand...
Click to collapse
I had a TMobile S7 edge and flashing unlocked firmware never unlocked the device. That's handled by TMobile servers so...
Flashing unlocked firmware will give you just that. The smoother, bloat free firmware from another device but not the actual sim unlock.
I bought an unlocked device and wanted wifi calling so I flashed the g950usqs1aqf7 att firmware with Odin and it worked to enable wifi calling but I'm unable to get any ota updates and I hate the bloat. Is it possible to get WiFi calling with an unlocked firmware like this one? Also what is the difference between the U and U1 firmware variants?
maquino1985 said:
I bought an unlocked device and wanted wifi calling so I flashed the g950usqs1aqf7 att firmware with Odin and it worked to enable wifi calling but I'm unable to get any ota updates and I hate the bloat. Is it possible to get WiFi calling with an unlocked firmware like this one? Also what is the difference between the U and U1 firmware variants?
Click to expand...
Click to collapse
There are plenty of threads on this, but I don't think anyone was ever successful. I flashed att Oreo to my u1 and got the options, but can't get my company to change my imei back.... My personal phone sim works fine. Quit at that point since it's an Ims registration error. You can try merging the wifi calling apks, but I'm pretty sure it's baked pretty deep in the os. The Verizon guys got some of it working. You can try their threads and see if any of it applies to us.
twizt3d said:
There are plenty of threads on this, but I don't think anyone was ever successful. I flashed att Oreo to my u1 and got the options, but can't get my company to change my imei back.... My personal phone sim works fine. Quit at that point since it's an Ims registration error. You can try merging the wifi calling apks, but I'm pretty sure it's baked pretty deep in the os. The Verizon guys got some of it working. You can try their threads and see if any of it applies to us.
Click to expand...
Click to collapse
Thanks. Some threads made it sound possible but inconclusive. I'll just assume it doesn't work.
BTW, can you link to the att oreo fw? And what do u flash that with Odin or comsey?
The thread right below this one entitled Oreo ota has all the details and it needs to be side loaded through adb. Not Odin. But you will need to Odin the 950u base to get off u1
twizt3d said:
The thread right below this one entitled Oreo ota has all the details and it needs to be side loaded through adb. Not Odin. But you will need to Odin the 950u base to get off u1
Click to expand...
Click to collapse
Ok thanks. I need to flash anyways because I'm having terrible battery issues and just debating whether to go to a newer version of 950u or back to U1 and losing WiFi calling. In your opinion is oreo beta worth it
So just to confirm, I have read everything, but I am just a bit confused. If I flashed the unlocked firmware via modified odin on a locked AT&T S8 it will remove a lot of the carrier bloat and give my my wifi hotspot back, but remove wifi calling. Similar to when I flashed the T-Mobile firmware on my AT&T S7 and got rid of a ton of the AT&T bloatware but was able to activate my wifi hotspot but lost wifi calling. I stay locked to AT&T which is fine that is not my purpose for flashing
---------- Post added at 07:03 AM ---------- Previous post was at 07:01 AM ----------
and can you re-upload the link is dead now
The links don't work. Any chance you've still got the firmware? I've been overseas since october. I have an unlocked AT&T phone that I intend to keep using when I get back, so I want to keep it AT&T FW.
Hi.
I have a G955U Galaxy S8+ AT&T Factory Unlocked on Android 7.0
Baseband Version: G955USQU1AQD9
Android Security Patch Level - April 1, 2017
I no longer live in the US, and currently in the Philippines. Phone works great and the signal is too and all, but I cannot get OTA updates.
Can I just download the firmware file in this thread and flash straight through ODIN, or do I need to follow another guide?
So i've read that the sprint version of the S8 Active is on bootloader v5 and the T-Mobile version is bootloader v1. Is it then possible to flash the T-Mobile firmware onto the Sprint Variant ?. The device is already unlocked but i would like Wifi-calling to work for T-Mobile.
Edit 1: Found this and successfully fully flashed from Sprint to T-Mobile(everything works including Wifi Calling). Only works if you are on bootloader version 1.
https://www.youtube.com/watch?v=DEDDTcR1SiQ
I AM NOT THE CREATOR NOR DO I TAKE CREDIT FOR THIS
No apparently the bootloader version must match or be lower so in this case sprint is higher so you can't flash. I've tried and downloaded the tmobile oreo firmware; you'll just get a fail in odin
zed011 said:
No apparently the bootloader version must match or be lower so in this case sprint is higher so you can't flash. I've tried and downloaded the tmobile oreo firmware; you'll just get a fail in odin
Click to expand...
Click to collapse
That is the part i am maybe not understanding. My Sprint S8 active says it is Software version G892USQS1ARC1. Doesn't that mean it is bootloader version 1?
Sorry I was wrong! I actually flashed it! Very happy right now. I was being stupid and using an older version of odin before. Now I successfully flashed sprint to t-mobile oreo with no problems! Use Odin 3.13.1; not prince comsy mod or anything else. So it was bootloader 1 after all; there were some misleading posts without proof. I will trust the software number from now on
zed011 said:
Sorry I was wrong! I actually flashed it! Very happy right now. I was being stupid and using an older version of odin before. Now I successfully flashed sprint to t-mobile oreo with no problems! Use Odin 3.13.1; not prince comsy mod or anything else. So it was bootloader 1 after all; there were some misleading posts without proof. I will trust the software number from now on
Click to expand...
Click to collapse
ARE YOU SERIOUS?!?! Does wifi calling work for you now?
I'm not sure. How can I check? I'm on Fido which is Canadian carrier without WiFi calling. I'm guessing I'm supposed to be looking for a tmobile WiFi calling app. See attachment screenshot for proof. Still recognizes my phone is from sprint
Yeah i just finished flashing it and i get the same as you. Phone still recognized as Sprint and no WiFi calling. Darn. Android 8.0 Oreo is a huge plus however.
zed011 said:
Sorry I was wrong! I actually flashed it! Very happy right now. I was being stupid and using an older version of odin before. Now I successfully flashed sprint to t-mobile oreo with no problems! Use Odin 3.13.1; not prince comsy mod or anything else. So it was bootloader 1 after all; there were some misleading posts without proof. I will trust the software number from now on
Click to expand...
Click to collapse
I think we need to follow this guide to change carrier but the thing is there is no factory binary for the s8 active so this guide won't work until there is one...
https://forum.xda-developers.com/galaxy-s8/how-to/switch-to-carrier-firmware-100-t3609487
Actually I have found and flashed a factory binary trying to change it to T-Mobile. The problem I ran into is they want you to download the firmware with "w" after the model number. That is what I think let's you change the option after typing in the code. That firmware is only for s8 I think(not active as it has the s8 model #). Without flashing that, after I typed in the code the only option I had to choose from was sprint. No "xac" or whatever it was.
If I am not mistaken. The model with the "w" is the Canadian version of the s8. The s8 active is US only I think.
So Im getting ready to pick up a Sprint version to use on Att or Tmobile (good deal). Are you guys seeing any issues after flashing? Thanks
jmill75 said:
So Im getting ready to pick up a Sprint version to use on Att or Tmobile (good deal). Are you guys seeing any issues after flashing? Thanks
Click to expand...
Click to collapse
The only thing I've notice is there is no option for mobile hotspot( i don't think it was there to begin with, i could be wrong however). Other than that it works perfectly. Great battery life and everything. Flash the userdata to get rid of the Sprint Boot animation if you'd like. I did it and now there is just the "Samsung s8 Active" logo, then lock screen. Goodluck.
Mohamed1993 said:
The only thing I've notice is there is no option for mobile hotspot( i don't think it was there to begin with, i could be wrong however). Other than that it works perfectly. Great battery life and everything. Flash the userdata to get rid of the Sprint Boot animation if you'd like. I did it and now there is just the "Samsung s8 Active" logo, then lock screen. Goodluck.
Click to expand...
Click to collapse
Do you have a link by chance to the files? Thanks
After flashing Sprint variant of the device to T-Mobile firmware, do all features work: WiFi Calling, Band 12, VoLTE and Band 71?
Charkatak said:
After flashing Sprint variant of the device to T-Mobile firmware, do all features work: WiFi Calling, Band 12, VoLTE and Band 71?
Click to expand...
Click to collapse
No wifi calling, no VoLTE. Not sure about the bands
Charkatak said:
After flashing Sprint variant of the device to T-Mobile firmware, do all features work: WiFi Calling, Band 12, VoLTE and Band 71?
Click to expand...
Click to collapse
WiFi calling works fine on T-Mobile without flashing to T-Mobile firmware. Only issue is that sometimes it gets stuck enabling WiFi calling requiring a reboot. Band 12 also works, its in the Sprint specifications. The big question I wonder about is if band 71 can be enabled.
flash not working?
i flashed the tmobile firmware and after its all dont i boots up does an update and then boots with all the sprint stuff still
snowfirebeast said:
i flashed the tmobile firmware and after its all dont i boots up does an update and then boots with all the sprint stuff still
Click to expand...
Click to collapse
Did you follow the video I posted?. Ignore all the other comments about things not working. When i updated the OP with the link, it fully flashed the sprint device to T-Mobile. The only thing you have to watch out for, is if your Sprint software is running a new bootloader. You can tell by looking at the baseband version number. This will only work if you are on bootloader 1. My baseband is currently "G892USQS1BRD5". The bootloader version is the 5th character starting from the right. The number 1 before "BRD5".
Last night as part of rooting, I was getting issues with the MetroPCS Ocean firmware with the update failing message. I took a look at the RETUS firmwares and saw the latest so I took a chance and was able to flash the Retail version with no problems, booted up and 'worked out of the box' so to speak. It is also lighter on the features since it doesn't include the MetroPCS apps. I am not going to try rooting with this one, but it seems to be quite stable and an a little faster if that makes any sense.
Your mileage may vary!
You assume any risk by attempting the same thing on your device, but I figured it would be something someone would be interested in knowing.
I'm running MetroPCS software on a Amazon device
I'm running Cricket software on a MetroPCS device &
I'm running Amazon software on a MetroPCS device
Cons on both I've come across so far.
Cricket software on a MetroPCS device I get Boot screen says Bad key in top left corner before loading the device.
Amazon software on a MetroPCS device I get a Boot screen says untrusted device before loading the device.
Pros is they both work great.
Medfordite said:
Last night as part of rooting, I was getting issues with the MetroPCS Ocean firmware with the update failing message. I took a look at the RETUS firmwares and saw the latest so I took a chance and was able to flash the Retail version with no problems, booted up and 'worked out of the box' so to speak. It is also lighter on the features since it doesn't include the MetroPCS apps. I am not going to try rooting with this one, but it seems to be quite stable and an a little faster if that makes any sense.
Your mileage may vary!
You assume any risk by attempting the same thing on your device, but I figured it would be something someone would be interested in knowing.
Click to expand...
Click to collapse
Since you did that when you have the time, try to go back a lower build or your OG Build and check if you still have data and sim accses. I ask because (I have a RETUS) and since I flashed the latest one available "PPO29.114-108 May 1 Security Update" can't go back to OG Build it came with without losing data and sim detection. Something was updated in that build that even if you flash back it broke that. I even flashed the modem to check but no still no data or SIM detected at all. Only all fine in the most recent build.
Medfordite said:
Last night as part of rooting, I was getting issues with the MetroPCS Ocean firmware with the update failing message. I took a look at the RETUS firmwares and saw the latest so I took a chance and was able to flash the Retail version with no problems, booted up and 'worked out of the box' so to speak. It is also lighter on the features since it doesn't include the MetroPCS apps. I am not going to try rooting with this one, but it seems to be quite stable and an a little faster if that makes any sense.
Your mileage may vary!
You assume any risk by attempting the same thing on your device, but I figured it would be something someone would be interested in knowing.
Click to expand...
Click to collapse
I am guessing that it is still sim locked to metropcs after flashing this?
twfs said:
I am guessing that it is still sim locked to metropcs after flashing this?
Click to expand...
Click to collapse
Flashing a Carrier or Retail ROM won't ever unlock a Carrier Lock device. If it were that simple don't you think we will ever have this issue. Hell the term network lock won't even exist in a perfect world.
---------- Post added at 03:24 AM ---------- Previous post was at 03:22 AM ----------
twfs said:
I am guessing that it is still sim locked to metropcs after flashing this?
Click to expand...
Click to collapse
And yes there are several Motorola Devices that are firmware interchangeable. Been doing it since the first Moto X times. Only benefit from this procedure no bloatware and faster updates that's it. Oh and better performance since it doesn't include crappware
Medfordite said:
Last night as part of rooting, I was getting issues with the MetroPCS Ocean firmware with the update failing message. I took a look at the RETUS firmwares and saw the latest so I took a chance and was able to flash the Retail version with no problems, booted up and 'worked out of the box' so to speak. It is also lighter on the features since it doesn't include the MetroPCS apps. I am not going to try rooting with this one, but it seems to be quite stable and an a little faster if that makes any sense.
Your mileage may vary!
You assume any risk by attempting the same thing on your device, but I figured it would be something someone would be interested in knowing.
Click to expand...
Click to collapse
PartyDroid said:
I'm running Cricket software on a MetroPCS device &
I'm running Amazon software on a MetroPCS device
Cons on both I've come across so far.
Cricket software on a MetroPCS device I get Boot screen says Bad key in top left corner before loading the device.
Amazon software on a MetroPCS device I get a Boot screen says untrusted device before loading the device.
Pros is they both work great.
Click to expand...
Click to collapse
I'm interested in flashing my MetroPCS g7 stock unrooted to the Amazon rom if you care to point me in the right direction please.
disobey said:
I'm interested in flashing my MetroPCS g7 stock unrooted to the Amazon rom if you care to point me in the right direction please.
Click to expand...
Click to collapse
PSA. If you flsh Cricket, Metro etc Roth the RETUS Latest firmware you won't be able to go back to you LG firmware. That firmware updates the Bootloader and that preventa going back to a lower workifn version. You can doing what I posted earlier by while flashing back to OG Firmware skip flashing modem and fsg bins and don't execute the modem erase commands.
disobey said:
I'm interested in flashing my MetroPCS g7 stock unrooted to the Amazon rom if you care to point me in the right direction please.
Click to expand...
Click to collapse
https://mirrors.lolinet.com/firmware/moto/ocean/official/AMZ/
Ok I bricked my phone via magisk update, I was on MetroPCS variant of Ocean firmware. Now I manually flashed RETUS PPO 29.114-108; It seems to be running fine other than saying my device is not certified....is there a custom recovery that will work for Ocean RETUS using twrp? Should I try to re root using magisk systemless-ly copying boot.img? Thanks for info and any input would be greatly appreciated! Thanks
PartyDroid said:
https://mirrors.lolinet.com/firmware/moto/ocean/official/AMZ/
Click to expand...
Click to collapse
Can we get directions on how you guys are doing this please. I've tried using the back to stock directions but extracting a different firmware but it's not working. I have Metropcs.....I extracted Tmobile firmware and use the back to stock commands...but when rebooting its' still Metropcs....please help with some directions.
nashi20002003 said:
Can we get directions on how you guys are doing this please. I've tried using the back to stock directions but extracting a different firmware but it's not working. I have Metropcs.....I extracted Tmobile firmware and use the back to stock commands...but when rebooting its' still Metropcs....please help with some directions.
Click to expand...
Click to collapse
I'd like to know as well, I got 2 of these Moto G Power 7's from Metro PCS and would love a stock ROM without all the metro bloat. Not sure on Metro's unlocking policy if they will unlock it and what bands this all has if it has CDMA or is it GSM only?
chennault05 said:
Ok I bricked my phone via magisk update, I was on MetroPCS variant of Ocean firmware. Now I manually flashed RETUS PPO 29.114-108; It seems to be running fine other than saying my device is not certified....is there a custom recovery that will work for Ocean RETUS using twrp? Should I try to re root using magisk systemless-ly copying boot.img? Thanks for info and any input would be greatly appreciated! Thanks
Click to expand...
Click to collapse
If I were you I will stay away from Magisk until they update the app, still damaging the boot.img files..
Omar04 said:
Flashing a Carrier or Retail ROM won't ever unlock a Carrier Lock device. If it were that simple don't you think we will ever have this issue. Hell the term network lock won't even exist in a perfect world.
---------- Post added at 03:24 AM ---------- Previous post was at 03:22 AM ----------
And yes there are several Motorola Devices that are firmware interchangeable. Been doing it since the first Moto X times. Only benefit from this procedure no bloatware and faster updates that's it. Oh and better performance since it doesn't include crappware
Click to expand...
Click to collapse
Do you know if there is a way to sim-unlock a Metro device? Searched on eBay, no luck... thanks.
edwardxi said:
Do you know if there is a way to sim-unlock a Metro device? Searched on eBay, no luck... thanks.
Click to expand...
Click to collapse
Note to Admin: I am not sure if this link is allowed if not please remove this message..
https://www.ebay.com/itm/264407271128?ViewItem=&item=264407271128
PartyDroid said:
Note to Admin: I am not sure if this link is allowed if not please remove this message..
https://www.ebay.com/itm/264407271128?ViewItem=&item=264407271128
Click to expand...
Click to collapse
thanks, I found one on eBay for $38... too expensive, used to around $10
nashi20002003 said:
Can we get directions on how you guys are doing this please. I've tried using the back to stock directions but extracting a different firmware but it's not working. I have Metropcs.....I extracted Tmobile firmware and use the back to stock commands...but when rebooting its' still Metropcs....please help with some directions.
Click to expand...
Click to collapse
Instructions are in the thread back to stock.
Secondly, I'm on MetroPCS and flashed the retus2 firmware (BestBuy versions) no MetroPCS bloatware. Flash the retus2 and you'll be fine.
edwardxi said:
thanks, I found one on eBay for $38... too expensive, used to around $10
Click to expand...
Click to collapse
You probably won't find one cheaper. $10 ones are ones that give you a code to unlock. Unlocking a MetroPCS/TMO G7Power with the Server unlock app requires a person to remotely connect to your phone and edit your NV files. Currently they are changing the imei to a different model phone that they can generate the unlock codes for. Since they are using a different model phone imei, activating on Sprint Network could be an issue since Sprint is picky as to what phones they put on their network.
If I flash "retail" firmware on a TMO Sim locked Moto G7 power will it ask me for an unlock code that I don't have? Bought it on eBay and TMO says its eligible to unlock but refuses because I'm not the original owner. Bootloader is unlocked.
EDIT: Figured out my issue. Was my fault. Flashed the RETAILUS firmware on my MetroPCS model.
Thanks OP!
Also to add to this, the Metro model is NOT supposed to be compitable with Verizon due to lack of CDMA.... Well Magically the phone now supports CDMA so it has a CDMA radio in it!