Hello! I got a huge problem, i cant activate the wifi or the mobile functions on my phone after flashing it. Also in abote phone it says its a oneplus 7t (not pro)
May i have flashed a oneplus 7t firmware? I have tryed the volte fix with no ressults.. When i bricked the phone i did an flashall using fastboot, but culdent flashs system and vendors. Please help me!
I did the same thing as well. I ended up using the msm tool to flash the 9.5.3 gmba software then downloaded and updated to the 10.0.3. after that finished I downloaded the 10.3 global update and went smoothly. Then go to bootloader and flash twrp and root. First time you flash twrp make sure you check the box for ramdisk otherwise recovery won't stay as twrp, it will just keep going back to stock recovery. Also before you restart your device you have to flash magisk otherwise your phone will not boot. Also if you restart and their is no cell reception or cannot turn on wifi you will either have to go back and uninstall magisk then reinstall or do the process all over again. I did the 9.5.3 because I tried others and failed to reflash. The 9.5.3 seems to always work for many people
Knorrigbollen said:
May i have flashed a oneplus 7t firmware?
Click to expand...
Click to collapse
Impossible to tell what you've done. You haven't given sufficient info. Only you know what has been done to the phone so far. Where did you get the file, what is the file named, etc.
You have 3 threads going, none of which have sufficient info for anyone to provide proper help. Making multiple threads is not the right way to get help. Just confuses those trying to help you, and will make the situation worse. Stick to one thread, and give as much specific info as possible, as I've noted here: https://forum.xda-developers.com/on...ease-soft-bricked-phone-t4044311#post81668605
Im sorry im panicing
I tryied to flash the stock rom from this site after failed to root. THe fastboot one, when flashing it fails to flash system a and b, says partion not found
Hello again!
Ive been trying the msm tool, i downloaded it from here
https://forum.xda-developers.com/7t-pro/how-to/op7tpro-unbrick-tool-to-restore-device-t4002909
It says it shuld support my version (hd1913) but MSM tool says "unsupported Target EU)
HOw can i fix this?
Also, ive flashed a oneplus 7t image, shuld i flash a new image and brick it then use msm tool?`
now it says Devices not match image. The post says it shuld support my model.
With every update until this one, I was able to keep root (download update, local upgrade via settings, install update, install magisk to inactive slot, reboot and done) but it did not work with this latest one. I tried mauro's toolkit but it didn't work either. What are my options to get root now? Thanks in advance!
https://forum.xda-developers.com/oneplus-8/how-to/guide-magisk-oxygenos-11-beta-1-global-t4160833
Flash the patched img!
I'm a ****ing genius. Managed to bootloop/temp brick my phone. MSM tool saved my ass but it took a usb 2.0 slot and lots of tries to get into edl mode. I am getting tired of fighting for root and it's such a jarring and unpleasant experience to suddenly lose root.
t-mizzle said:
I'm a ****ing genius. Managed to bootloop/temp brick my phone. MSM tool saved my ass but it took a usb 2.0 slot and lots of tries to get into edl mode. I am getting tired of fighting for root and it's such a jarring and unpleasant experience to suddenly lose root.
Click to expand...
Click to collapse
I feel you mate, when my phone arrived I immediately managed to brick it, but it's just part of the game. To be honest I found the unbricking and rooting pretty easy on OP8, I'm quite sure when the next OTA arrives you just have to follow the same method (installing magisk to inactive slot then reboot) just like in OOS10.
Recovered, tried again, same outcome. Patched image installed correctly according to the command prompt but actually resulted in a boot loop. Will hold off from Android 11 for now.
Are you flashing the right img? What's your ROM build version? I bet you flash a wrong img for your ROM. In the above mentioned thread there are only imgs for EU, global and Indian ROMs, if you using some kind of US specific ROM then tell me and I can make you a patched img.
https://oneplus.gadgethacks.com/how...factory-images-for-any-oneplus-phone-0249751/
I understand that I may not be able to switch to Oxygen, but that's ok, I just need to get rid of all these Chinese apps
So,just got my OP9, literally few hours ago and just turned it on now, it's a LE2110 model (chinese?) flashed with OOS 11.2.4.4.LE25DA which seems to be an Indian version of OOS. Also, on Android if you turn on
USB debugging
You can disable apps via adb
It is possible. Just follow the guide and take your time doing it.
Official OnePlus 9 Oxygen to Color and back
hi everyone I got the official firmware How to install? 1.Download firmware 2.Put the file in the phone directory 3. Open system update, select local update Warning！ 1.Please backup your data！ 2.imei cannot be recognized correctly...
forum.xda-developers.com
I just tried that but I get 'Verification Failed' message when I try to update to Oxygen
I flashed the img manually, so I cannot help. Do not attempt anything over fastboot unless you know what you are doing, we already have several posts about people bricking their phone when they do not take care.
dotuletz said:
So,just got my OP9, literally few hours ago and just turned it on now, it's a LE2110 model (chinese?) flashed with OOS 11.2.4.4.LE25DA which seems to be an Indian version of OOS. Also, on Android if you turn on
USB debugging
You can disable apps via adb
Click to expand...
Click to collapse
Could you let me know how you did that, or point me to a thread please?
noname122414 said:
I flashed the img manually, so I cannot help. Do not attempt anything over fastboot unless you know what you are doing, we already have several posts about people bricking their phone when they do not take care.
Click to expand...
Click to collapse
I've used fastboot before, but never with this brand, I'm not sure which rom I should use or if the process is different
It is the img from the link I posted. I unpacked it and flashed it. But again, make sure you know what you are doing! Nobody can help you when you do a mistake there, read carefully. I will maybe later post a small guide on how to do it.
It seems lots of us have had to use the India 9 Pro MSM to recover our devices and in the process, we lose the ability to go back to OOS12 or ROMs based on that firmware because the touchscreen stops working and also trying to convert T-Mobile variants, the fastboot scripts are just bricking them. Well I found a fix for these issues. Those who just want to convert can skip the MSM Tool process and get right to the conversion process as long as they're already running OOS11.
First thing is first, you need to be on OOS11. If you have a T-Mobile variant and you have flashed it with India firmware, you have to use a modded T-Mobile MSM: https://forum.xda-developers.com/t/...ariant-flashing-as-well.4454357/post-87050821
If you have a T-Mobile variant that hasn't used the Indian 9 Pro MSM Tool, is on OOS12, and you're just wanting to convert, you need this tool: https://forum.xda-developers.com/t/oneplus-9-11-2-22-2-t-mobile-msm-download-tool.4276119/
If you have a global variant or a global variant that has been flashed with Indian firmware, you can use this MSM (choose O2 for global or India for India in the Target dropdown, check Sha256, uncheck use lite firehose, it's a multi-target MSM Tool): https://mega.nz/file/ZWtGxTSb#UZ6aSOR2UTYrCao2fQNJ1IN5LSxPNBOxzel1kihnnJs
If you don't know how to use the MSM Tool, there are other guides around here, that's outside of the scope of this post.
Once you are back on OOS11, unlock the bootloader. We also need USB debugging enabled.
Now we need a tool called Fastboot Enhance. This wonderful tool allows you to directly flash OTAs from fastbootd and it doesn't have the same brick risk that flashing with fastboot scripts does.
Download it and unzip it somewhere.
Next we need the OOS11 global downgrade package (or whatever region you are wanting to switch to, global is recommended for T-Mobile variants) from here: https://forum.xda-developers.com/t/oneplus-9-rom-ota-oxygen-os-repo-of-oxygen-os-builds.4254579/
Fire up command prompt in the folder you have your platform tools and run:
adb reboot fastboot (if you do adb reboot bootloader you will then need to type fastboot reboot fastboot to get to fastbootd)
This will take you into fastbootd. It will have a screen that has three different languages to choose from on it. Go ahead and fire up Fastboot Enhance now.
It may take a few seconds for the app to recognize the device but when you see it in the list, double-click it to get to the main screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Check that it says that the device is in fastbootd. Now we just need to click Flash Payload.bin and choose the OTA we downloaded earlier (we don't even need to extract the zip, the app does that for us). If it pops up with an unrecognized partitions error, you're either not in fastbootd, you didn't MSM back to stock (you cannot do this with a custom recovery), or you grabbed an OOS12 OTA. Do not continue and check that everything is correct otherwise you will brick and have to start all over with the MSM Tool. Likewise, if it pops up an alert about cow partitions, don't continue. Go to the partitions screen and search for cow and delete them all.
Once it's done, boot the device, factory reset it in the settings (this is mandatory as Fastboot Enhance does not erase the device like a normal downgrade would do and this can cause problems), set it back up, and then do the OTA process to get back to where you want to go.
Hey bud. So I ended up having too india again. After flashing nameless, it locked up completely. I followed along, but maybe I made a mistake around this point?
Once I was able to boot into India, i just used another msmtoolkit, this successfully converted my Pro to the proper OP 9 5g (the cutout for the cam was aligned so it worked) and i was now on 11.2.10.10
i then let the phone just OTA itself to Android 12.1 c.48
this is when i attempted to get into the latest nameless ROM that requires us to go from OOS 11 based system for the tom to A12.
did i mess up? Should i have flashed 12.1 again?
because the additional flash requirements were fairly straight forward. .
i unlocked the bootloader and then re-enabled /adb debugging the 12.1 and rebooted to bootloader
i flashed the 3 images i extracted from the payload of the latest 12.1 nameless zip and flashed them
fastboot flash boot boot.img
fastboot flash vendor_boot vendor_boot.img
fastboot flash dtbo dtbo.img
Click to expand...
Click to collapse
while in the same fastboot, i selected recovery boot. i was in the lineage recovery system, this is where i formatted and sideloaded in the same session
when i rebooted i was qualcom killed. could sitll fastboot but nothing would take so i just started over. i am now on my 2nd toolkit flash (india-pro to non-pro global.
i may just stick with the latest release that doesnt require 12. it doesnt help that im 2 days no sleep (unrelated but not helping) but even saying that, i feel i had most of what was required done, but im a big dummy so who knows
youre knowledge is sexy
THANK YOU SIR, true gentleman. Your post I guess was the only one convincing enough that it was finally brushed through the beta testing phase enough that it would be worth trying. No real risk here considering its just using that awesome tool you mentioned in the post, which i've never heard of. will be using for now on. Dunno about any testing with this method so i thought i would owe the community my post. i saw the sahara error post not too long ago talking about a fix with no testing yet xD that made me laugh honestly. But yeah my phone is now converted global through payload.bin flash in fastbootd. Tmo Variant had me & my girls phone networked unlocked through the one guy that was doing it for free on here a while back.. then applied for unlock code and did it officially, never tried to convert due to brick concerns, so i had the easy route through the methods involved in this post, considering i was still on oos 11 with bootloader unlocked when reading this. anyways, i think its safe to say its fixed pretty hyped to flash roms now and not get bootlooped and excited to see where this variant is gonna go! thanks again mate.
applyscience said:
Hey bud. So I ended up having too india again. After flashing nameless, it locked up completely. I followed along, but maybe I made a mistake around this point?
Once I was able to boot into India, i just used another msmtoolkit, this successfully converted my Pro to the proper OP 9 5g (the cutout for the cam was aligned so it worked) and i was now on 11.2.10.10
i then let the phone just OTA itself to Android 12.1 c.48
this is when i attempted to get into the latest nameless ROM that requires us to go from OOS 11 based system for the tom to A12.
did i mess up? Should i have flashed 12.1 again?
because the additional flash requirements were fairly straight forward. .
i unlocked the bootloader and then re-enabled /adb debugging the 12.1 and rebooted to bootloader
i flashed the 3 images i extracted from the payload of the latest 12.1 nameless zip and flashed them
while in the same fastboot, i selected recovery boot. i was in the lineage recovery system, this is where i formatted and sideloaded in the same session
when i rebooted i was qualcom killed. could sitll fastboot but nothing would take so i just started over. i am now on my 2nd toolkit flash (india-pro to non-pro global.
i may just stick with the latest release that doesnt require 12. it doesnt help that im 2 days no sleep (unrelated but not helping) but even saying that, i feel i had most of what was required done, but im a big dummy so who knows
youre knowledge is sexy
Click to expand...
Click to collapse
Did you use the copy partitions zip? You will brick if you don't do that after a MSM.
Process is:
MSM
Upgrade to C.48
Extract boot, dtbo, and vendor_boot from ROM
Fastboot flash dtbo, vendor_boot, and boot in that order
Reboot to recovery
Factory reset
Run copy partitions script
Reboot recovery
Flash ROM
Reboot
It shouldn't brick if you follow that process exactly.
zacattackkc said:
THANK YOU SIR, true gentleman. Your post I guess was the only one convincing enough that it was finally brushed through the beta testing phase enough that it would be worth trying. No real risk here considering its just using that awesome tool you mentioned in the post, which i've never heard of. will be using for now on. Dunno about any testing with this method so i thought i would owe the community my post. i saw the sahara error post not too long ago talking about a fix with no testing yet xD that made me laugh honestly. But yeah my phone is now converted global through payload.bin flash in fastbootd. Tmo Variant had me & my girls phone networked unlocked through the one guy that was doing it for free on here a while back.. then applied for unlock code and did it officially, never tried to convert due to brick concerns, so i had the easy route through the methods involved in this post, considering i was still on oos 11 with bootloader unlocked when reading this. anyways, i think its safe to say its fixed pretty hyped to flash roms now and not get bootlooped and excited to see where this variant is gonna go! thanks again mate.
Click to expand...
Click to collapse
Awesome, glad that it worked for you! There were two other testers before you as well as myself that have confirmed this method works, I guess I should have put that in the post. Thanks for being a guinea pig
question; so now that i did it through advanced boot app, does that mean my phone is officially seen as a global one? can i use global regular msm? can i use fastboot payload files for global, ect?
zacattackkc said:
question; so now that i did it through advanced boot app, does that mean my phone is officially seen as a global one? can i use global regular msm? can i use fastboot payload files for global, ect?
Click to expand...
Click to collapse
So your phone will be seen as global by OTAs but not the MSM. You would have to use a modded MSM Tool that flashes global firmware while targeting your device model.
EtherealRemnant said:
So your phone will be seen as global by OTAs but not the MSM. You would have to use a modded MSM Tool that flashes global firmware while targeting your device model.
Click to expand...
Click to collapse
damn.. that seems to be the culprit of everyone's hard brick.. so what about fastboot flashing oem software for global? I'm guessing that's not a problem because otas are of similar format, but just in a smaller package because it's adding only the updated parts instead of the full ROM.. and is this enhanced fastboot app an alternative to using msmtool and then unlocking bootloader and then flashing custom roms? kinda seems like it would be. and as a matter of fact after using the enhanced fastboot tool I went ahead and put it into fastbootd and flashed payload and it wouldn't boot at first. The app itself gave me an error regarding some cow partitions (really strange and very new concept for me) and told me that I could possibly fix everything if I deleted the cow partitions so I did and then formatted data and it booted into nameless AOSP. This might be the new way to flash custom roms due to the simple fact that it's way quicker than having to use NSM tool and then unlock bootloader and then do all the intricate flashing custom ROM parts. Just put in a fast boot d and flash just always have to make sure you format data afterwards to decrypt. This hasn't been fully tested at least not that I'm aware of
zacattackkc said:
damn.. that seems to be the culprit of everyone's hard brick.. so what about fastboot flashing oem software for global? I'm guessing that's not a problem because otas are of similar format, but just in a smaller package because it's adding only the updated parts instead of the full ROM.. and is this enhanced fastboot app an alternative to using msmtool and then unlocking bootloader and then flashing custom roms? kinda seems like it would be. and as a matter of fact after using the enhanced fastboot tool I went ahead and put it into fastbootd and flashed payload and it wouldn't boot at first. The app itself gave me an error regarding some cow partitions (really strange and very new concept for me) and told me that I could possibly fix everything if I deleted the cow partitions so I did and then formatted data and it booted into nameless AOSP. This might be the new way to flash custom roms due to the simple fact that it's way quicker than having to use NSM tool and then unlock bootloader and then do all the intricate flashing custom ROM parts. Just put in a fast boot d and flash just always have to make sure you format data afterwards to decrypt. This hasn't been fully tested at least not that I'm aware of
Click to expand...
Click to collapse
So honestly I haven't wanted to mess with it too much because it's such a chore to MSM and set everything back up. I can confirm the conversion works as long as you don't ignore any errors and continue (as you found out yourself with the cow files) but as for switching between custom ROMs, fastbootd is part of the custom recovery that we use to flash these ROMs and I don't know if it's possible to get a full flash using that custom recovery. When I tried to use an OOS12 OTA to skip having to use the MSM Tool to go back to stock, I got a partitions error and it rebooted to fastboot. Upon trying to flash the stock boot, dtbo, and vendor_boot, it bricked. I decided it was more important to figure out how to help people with their initial conversion process and I was frustrated because this particular brick was refusing to go into edl until I putzed around with the phone for a few minutes and managed to get it. It just isn't worth me possibly having an unrecoverable brick so I didn't mess with it any further.
In theory though, moving between custom ROMs using the same base firmware should be fine. People will have to test and find out.
EtherealRemnant said:
So honestly I haven't wanted to mess with it too much because it's such a chore to MSM and set everything back up. I can confirm the conversion works as long as you don't ignore any errors and continue (as you found out yourself with the cow files) but as for switching between custom ROMs, fastbootd is part of the custom recovery that we use to flash these ROMs and I don't know if it's possible to get a full flash using that custom recovery. When I tried to use an OOS12 OTA to skip having to use the MSM Tool to go back to stock, I got a partitions error and it rebooted to fastboot. Upon trying to flash the stock boot, dtbo, and vendor_boot, it bricked. I decided it was more important to figure out how to help people with their initial conversion process and I was frustrated because this particular brick was refusing to go into edl until I putzed around with the phone for a few minutes and managed to get it. It just isn't worth me possibly having an unrecoverable brick so I didn't mess with it any further.
In theory though, moving between custom ROMs using the same base firmware should be fine. People will have to test and find out.
Click to expand...
Click to collapse
ive been playing with them for the last 20 hours almost nonstop. im back to being tmobile but no msm tool (yet) will work with it. I tried almost every tmobile msm and a plethora of others have yet to work with it since. i also cant get my unlock_code.bin to work since i think somehow the code dont match with the region that it was applied with was. so i cant unlock my bootloader to get any conversion scripts or flashing commands to work. fastbootenhanced doesn't work either. i dont know what to do, please help me cuz i goofed hard as hell somewhere.
YourLocalDund33 said:
ive been playing with them for the last 20 hours almost nonstop. im back to being tmobile but no msm tool (yet) will work with it. I tried almost every tmobile msm and a plethora of others have yet to work with it since. i also cant get my unlock_code.bin to work since i think somehow the code dont match with the region that it was applied with was. so i cant unlock my bootloader to get any conversion scripts or flashing commands to work. fastbootenhanced doesn't work either. i dont know what to do, please help me cuz i goofed hard as hell somewhere.
Click to expand...
Click to collapse
Is the MSM saying device not match image, is it an unsupported target TMO error, what's the error?
EtherealRemnant said:
Is the MSM saying device not match image, is it an unsupported target TMO error, what's the error?
Click to expand...
Click to collapse
the msm is saying its a device mismatch and it thinks its the Indian variant but everything else is T-Mobile (stock), sorry about the late reply, its a holiday for me here.
Edit: I am Android version 12 now on T-Mobile, but I trying to get back to global rooted if that helps any with where I'm wanting to go with it
Edit 2: when I tried to use the multi msm tool provides I couldn't get O2 to show as an option anywhere, only Indian again.
YourLocalDund33 said:
the msm is saying its a device mismatch and it thinks its the Indian variant but everything else is T-Mobile (stock), sorry about the late reply, its a holiday for me here.
Edit: I am Android version 12 now on T-Mobile, but I trying to get back to global rooted if that helps any with where I'm wanting to go with it
Edit 2: when I tried to use the multi msm tool provides I couldn't get O2 to show as an option anywhere, only Indian again.
Click to expand...
Click to collapse
If it thinks it's an Indian variant, you use my modded MSM and select India for the target.
I recovered my bricked LE2110 from Oneplus 9 pro Indian msm tools and I wish to restore it to Oneplus 9 global rom. I try to use the "Fastboot enhance (version 1.3)" to flash the payload.bin into my LE2110, but I cannot find any "lfash" button ! The only button I can see is "Extract Image", am I missing something ? I try local upgrade but it cannot find the firmware file ! Please help !
EtherealRemnant said:
If it thinks it's an Indian variant, you use my modded MSM and select India for the target.
Click to expand...
Click to collapse
Thats why i edited my post, I tried to use the modded tool but it only gives the option for the indian variant. the 02 option is not there boss.
YourLocalDund33 said:
Thats why i edited my post, I tried to use the modded tool but it only gives the option for the indian variant. the 02 option is not there boss.
Click to expand...
Click to collapse
Which mod are you using? There have been a bunch posted in this forum.
EtherealRemnant said:
Which mod are you using? There have been a bunch posted in this forum.
Click to expand...
Click to collapse
the one from the op. its the one thats said its multi support for indian and global
YourLocalDund33 said:
the one from the op. its the one thats said its multi support for indian and global
Click to expand...
Click to collapse
Try this one.
3.56 GB file on MEGA
mega.nz
That one is also multi target. Both of these have been tested, I don't know why it's not working for you. You can also try not selecting a target and see what happens, I have found I don't always need to select the target if my device firmware hasn't been too corrupted.
Beware that with this one, you can't unlock the bootloader until after you go to OOS12 because OnePlus bugged the erase script on 11.2.10.10.
EtherealRemnant said:
Try this one.
3.56 GB file on MEGA
mega.nz
That one is also multi target. Both of these have been tested, I don't know why it's not working for you. You can also try not selecting a target and see what happens, I have found I don't always need to select the target if my device firmware hasn't been too corrupted.
Beware that with this one, you can't unlock the bootloader until after you go to OOS12 because OnePlus bugged the erase script on 11.2.10.10.
Click to expand...
Click to collapse
I'm already OOS12. still couldn't unlock bootloader. I was on chat with Oneplus support for an hour or so just a few minutes ago. They were a little slow with understanding the situation (didn't mention to them using a lot of modded msm tools) but I did tell them I used the tool to reset it to stock. that and my unlock_code.bin was no longer working. They put me on chat with the higher team and then the supervisor herself overtook chat and had a look at when my original application for my phone was. She decided she will reissue me a new code and said after 24-48hrs ill get the new code via email. How familiar are you with the erase script with the msm tool?
YourLocalDund33 said:
I'm already OOS12. still couldn't unlock bootloader. I was on chat with Oneplus support for an hour or so just a few minutes ago. They were a little slow with understanding the situation (didn't mention to them using a lot of modded msm tools) but I did tell them I used the tool to reset it to stock. that and my unlock_code.bin was no longer working. They put me on chat with the higher team and then the supervisor herself overtook chat and had a look at when my original application for my phone was. She decided she will reissue me a new code and said after 24-48hrs ill get the new code via email. How familiar are you with the erase script with the msm tool?
Click to expand...
Click to collapse
It's not the MSM Tool that's borked, it's the ROM itself.
Looking for a stock c61 LE2115 Global boot.img (oneplus 9)
I overwrote mine trying to root and now I can't get the phone to boot back into c61. I have access to fastboot though
I tried putting the beta of OOS13 on my Oneplus and now i get that error message and ive been trying for so long.
the serial number is fb7b98a9
Flash by edl if you can't do it then pm I'll fix it by tv
Could you elaborate a little further? Are you just not able to flash OO13 beta or has the attempt of doing so corrupted your device completely?
If the latter, You will most likely need to flash an emergency MSMToolkit. It is an Indian OP9Pro variant but will bring your device back from the dead. Once that is done, you will just run a proper MSMToolkit and be right as rain.
EtherealRemnant wrote up an amazing guide on how to carry this out. SO amazing that its the only guide stickied on the 9 forums, currently.
- Here is a mega hosted copy of the Indian OP9Pro MSMToolkit,
I can personally vouch for the guide, as my 9 went into a bricked state with vague errors about corrupted system. I tried every toolkit, recovery and ROM and nothing worked. Thats when EthRem came to my rescue. Hopefully his work can come to yours as well.
and if that isn't what you meant and are just dying to get into OOS13, id just stick with one of the many A13 ROMs currently available. OOS13 is beautiful but, i just cant honestly suggest using Oneplus software anymore.
Good luck
applyscience said:
Could you elaborate a little further? Are you just not able to flash OO13 beta or has the attempt of doing so corrupted your device completely?
If the latter, You will most likely need to flash an emergency MSMToolkit. It is an Indian OP9Pro variant but will bring your device back from the dead. Once that is done, you will just run a proper MSMToolkit and be right as rain.
EtherealRemnant wrote up an amazing guide on how to carry this out. SO amazing that its the only guide stickied on the 9 forums, currently.
- Here is a mega hosted copy of the Indian OP9Pro MSMToolkit,
I can personally vouch for the guide, as my 9 went into a bricked state with vague errors about corrupted system. I tried every toolkit, recovery and ROM and nothing worked. Thats when EthRem came to my rescue. Hopefully his work can come to yours as well.
and if that isn't what you meant and are just dying to get into OOS13, id just stick with one of the many A13 ROMs currently available. OOS13 is beautiful but, i just cant honestly suggest using Oneplus software anymore.
Click to expand...
Click to collapse
applyscience said:
Could you elaborate a little further? Are you just not able to flash OO13 beta or has the attempt of doing so corrupted your device completely?
If the latter, You will most likely need to flash an emergency MSMToolkit. It is an Indian OP9Pro variant but will bring your device back from the dead. Once that is done, you will just run a proper MSMToolkit and be right as rain.
EtherealRemnant wrote up an amazing guide on how to carry this out. SO amazing that its the only guide stickied on the 9 forums, currently.
- Here is a mega hosted copy of the Indian OP9Pro MSMToolkit,
I can personally vouch for the guide, as my 9 went into a bricked state with vague errors about corrupted system. I tried every toolkit, recovery and ROM and nothing worked. Thats when EthRem came to my rescue. Hopefully his work can come to yours as well.
and if that isn't what you meant and are just dying to get into OOS13, id just stick with one of the many A13 ROMs currently available. OOS13 is beautiful but, i just cant honestly suggest using Oneplus software anymore.
Good luck
Click to expand...
Click to collapse
The tool that you linked doesnt have o2 as he is saying in the guide.
Also yes, i tried flashing OOS13 and it just corrupted my device i've been endlessly working to fix it all day
SubColdSnow said:
The tool that you linked doesnt have o2 as he is saying in the guide.
Also yes, i tried flashing OOS13 and it just corrupted my device i've been endlessly working to fix it all day
Click to expand...
Click to collapse
1st of all flash with op9pro india msm with uncheck sah and check lite firehorse if u have hard bricked ur device then the next steps as mention above
rizzmughal said:
1st of all flash with op9pro india msm with uncheck sah and check lite firehorse if u have hard bricked ur device then the next steps as mention above
Click to expand...
Click to collapse
i tried and just get device does not match image
SubColdSnow said:
i tried and just get device does not match image
Click to expand...
Click to collapse
try it again. if anything, you will be attempting on the other slot. Many haves had issues and it just started working.
it could have been slot related, or possibly some minor detail that is finicky. (ex. you usually want to start the msmtoolkit and let it stay in the "waiting for device" phase and plug in your phone (which should be in EDL mode . youll know by the peeps of it habitually connecting/disconnecting on your PC)
assure you have india selected, assure you have the proper conditionals on/off per the guide's explication.
Assure you have the qualcom drivers installed, and they reflect the naming convention.
follow along the guide again and Just keep attempting it and don't get discouraged. Part of the reason people offer guides here is that they themselves failed many times until they got they figured it out and are trying to save people from it.
youll get it, dont worry.
I had this problem because I flashed a custom kernel on a custom rom today
SubColdSnow said:
i tried and just get device does not match image
Click to expand...
Click to collapse
try the modded msm tool. it worked for me.