Hello everyone!
Glad to say that I have made a few systemUI & Battery MODs for the AT&T LG G2. I have kept it straight and simple.
Not many features for now, by will release them slowly and steadily.
Features-
V1 {Alpha}
1) Removed the Volume Slider from the notification bar.
2) Added 1% Battery MOD to the system. [Shows the Decrements of Battery by 1% step by step]
3) Edited the scripts to support the 1% Battery MOD. [XML's]
4) Added ECO MODE [Quad Core Optimization][WIP - Doesnt show UP]
5) Added Screen Recording [WIP - Doesnt show UP]
6) Added New Mini Music Controller to support the System UI.
V2 {Alpha}:
1)Remove Cross LOGO {Yet to be Done}
2) Remove Brighness Slider {Same as above}
3) New Style Battery ICONS.
Coming soon.
How to Install : Works only if you are rooted..
1) Download the File from this link : Download
2) Go to system/apps > Delete LGSystemUI.apk .
3) Copy & Paste this apk {Given here} in system/apps & set permissions to RW-R--R-- .
4) Wait for 5-10 seconds and then reboot your Device.
5) You are Done.
6) Press Thanks!
NOTE: I'm not responsible if you brick your Device though its tested on AT&T LG G2.
Verizon & F320K Users please Upload the respective files :
1) Framework.res .apk
2) Lge.res .apk
3) Lg System UI.apk
XDA:DevDB Information
G2 System UI Mods, a App for the LG G2
Contributors
Jishnu Sur, Jishnu Sur
Version Information
Status: Alpha
Created 2013-09-21
Last Updated 2013-09-21
Welcome to AmatROM series.
Information:
I cooked a Touchwizzed Rk30sdk ROM.
Simply the best ROM for Samsung lovers.
WizzRK stand for Touchwiz for Rockchip.
"WizzRK = Wiz + Rk"
The ROM was tested on a Moroccan Tablet: Yooz MyPad 750 HD. Google it to compare its specs to your tablet's ones. It similar to Prestigio PMP5870C_DUO at 100% but I can't guarantee it will work on this since anything for this tab didn't work on the Yooz.
Disclaimer:
This is ROM made by a Linux Amateur and NOT a High Level Developer.
So you may some bugs. However, I am using it since longtime with no issue.
KEEP IN MIND I AM NOT RESPONSIBLE IF YOU MAKE YOUR TAB UNUSABLE FOR A LIFE TIME !
Features:
The ROM is:
- Fully Samsungnized
- Rooted
- Zipaligned
- Init.d support
- GPU Touch Rendering
- More RAM available
- Samsung Galaxy S4 Bootanimation
- Samsung Galaxy Note 8.0 sound
- Samsung Galaxy Note 8.0 Wallpapers
- Latest Busybox
- SQLite3 Support
- More.....
Downloads:
Download there ROM here Mediafire (487MB)
Mirrors NOT allowed please.
Installation:
Instructions are included in the package.
- Download and Extract the package.
- Open RockDevelopTool folder and open up RkAndroidTool
- Put your Tablet in Flash Mode (Read instruction in package for more info)
- When your is detected, Click "EraseID"
- Finally Click, "Run"
- After the process is completed, the device should boot automatically.
Bugs:
- Touchwiz in landscape is a bit buggy
Q/A ~FAQs:
1) Your Tablet display a blackscreen and nothing more ?
- Replace "Boot.img" with your tablet's one.
2) Your tablet goes into a bootloop ?
- Replace "Boot.img", "kernel.img", "Loader.bin", "Misc.img" "Parameter" and "Recovery.img", with the ones from your TAB. Just be sure your tablet's kernel is a 3.0.36+ one.
3) Do you get a "Problem loading widget" error and Touchwiz force close ?
- Get root file explorer (Root Explorer for example) and go to /system/app then copy everything in ".temp" folder. Now paste them to "system/app", replace if prompted. Now reboot. If still not working, leave a comment below.
4) You found the process too complicated and you can't flash the ROM ?
- Sent me your tablet and I will flash it for you :silly:
5) Your Tablet is completly dead and you cannot succeed flash the ROM again and again ?
- Restore it with your backup or an official firmware for it.
Screenshots:
Contributors:
@Nonta72
@Aeyan Ashraf
Just in case
ROM FEATURE
1) Rooted
2) Zipaligned
3) Deodexed
4) iOS7 UI
5) iOS7 Homescreen and icons
6) iOS7 Animations
7) iOS 7 Statusbar
8) iOS7 Messages
9) iOS7 Multitasking
10) iOS7 Settings
11) iOS7 Locker
12) iOS7 Contacts
13) iOS7 Weather
14) iOS7 Modded Camera
15) iOS7 Music
16) iOS7 Contacts and Dialer
17) iOS7 Wallpapers (125 wallpapers)
17) and other iOS7 apps
18) Very light (338 mb only)
19) Ram usage is 30-40 percent only when no apps are running
20) 3g on Sim1 only
21) Xposed and Gravitybox Friendly
22) v6 Supercharger Tweaks (for longer battery life)
23) Build.prop tweaks (Battery, Boot time, Phone, Network, Video, Camera, GPS, Performance, Dalvik and other tweaks)
INSTRUCTIONS
1. Download SMK_iKnight_Rom to sd card
Download link: https://drive.google.com/file/d/0B-HoiHT5I4o5Q0k2ZmxkdjJ0S1E/edit?usp=sharing
2. While waiting for the download to finish, READ everything here.
3. When you're done downloading, reboot to CWM recovery
4. Factory reset/wipe data/wipe cache/Format system
5. Install from sd card and choose the rom
6. Wait for about 3-5 minutes to boot up until the initial screen will appear.
7. You will be prompted to choose which launcher to use (Or if black screen, press home button) and select iLauncher
8. Enjoy your iKnight Rom
BUGS/ISSUES
1. I ported this rom from a qHD phone, so some apps have smaller resolution (wallpaper manager)
2. Bluetooth fc
3. Panorama in Camera not working
USEFUL TIPS
1. At first boot, change your keyboard (Google voice is default) in the iKeyboard app
2. If you have important changes to the settings and it does not work or encountered some apps not working, one important fix is to REBOOT
3. For faster and smoother performance, go to Settings ( not Setting), then go to the tab MORE... and then choose developer options. Set window, transition animation and animator duration to .5x
4. After doing step Useful tip 2, you may hide the Settings (Samsung UI settings) and then you can also hide the Gallery app. You can use the Photos app to view pictures. Or you may not hide if you like the Galley with its organized folders.
5. Dont forget to set your CPU Control. default is 497 mhz to a higher value for no lags in gaming and etc or to a lower value to save battery
6. You can use the statusbar but its very slow to adapt to changes in the apps. Enable iNoty (included in the rom) for more iOS7 UI. But if you want the statusbar, i would suggest you use the Tinted Statusbar.
7. Disable the system screen lock in the iLocker to avoid dual lockers (system lock has resolution problems)
8. For screenshot, use power+volume down button. if not successful and keep on capturing the volume. Use power+home button to capture screenshot
Patch v4.9.26
Download Link:
Gdrive: https://drive.google.com/file/d/0B-HoiHT5I4o5SXIzLVByNW9vejQ/edit?usp=sharing
P.S. Please be patient. Team Ayos is doing their best to give you a perfect iOS7 experience.
CREDITS N THANKS
Project iDroid by Team Ayos
Jimmy Piad
Gill Agdore
Choco Tops
Ozz Ymcmb
Zesi Villamor Delos Santos
Rem Zej
XDA:DevDB Information
iDroid Rom, ROM for all devices (see above for details)
Contributors
jampy10
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: MT5689
Based On: AOSP
Version Information
Status: Alpha
Created 2014-09-19
Last Updated 2014-10-06
Link plz
Sent from my Micromax A116 using XDA Free mobile app
shivambajaj said:
Link plz
Sent from my Micromax A116 using XDA Free mobile app
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B-HoiHT5I4o5Q0k2ZmxkdjJ0S1E/edit?usp=sharing
Guys, is this thread still active? Question regarding my starmobile knight. Phone stays on the same settings/apps nothing changes even after factory reset, so i decided to try a custom rom for this brand. On recovery there is no install from sdcard option, now how to install a cwm recovery.
-Thanks
Today in this thread im going to tell you how to theme your phone like the android 5.0 L
It includes android 5.0 Theme, Eastern egg, And appears android 5.0 in the about phone
What all You will need
1) Root!
2) Xposed installer : http://repo.xposed.info/module/de.robv.android.xposed.installer
3) Hk theme manager : http://repo.xposed.info/module/com.haiduongbk.hkthememanager
4) Lollipop theme : https://www.mediafire.com/?ar5fk8b0b5779im
5) Heads Up Notifications : http://repo.xposed.info/module/com.mohammadag.headsupenabler
6) GravityBox : http://repo.xposed.info/module/com.ceco.kitkat.gravitybox (Make sure you download the KK one)
7) Eggster : http://repo.xposed.info/module/areeb.xposed.eggster
8) Root Explorer : (get it from anywhere )
9) A lil bit of brain
Steps:
1) Download all the files mentioned above
2) Installer and open xposed installer
3) Open to modules > tick all
4) Open to framework > install/ update and it should reboot
5) after reboot your framework will get updated and then you must go to gravitybox > statusbar Tweaks > Signal Cluster Settings > select use lollipop icons
6) Open to hk Theme manager, Apply the theme. Reboot.
7) Open Eggster , and activate the android 5.0 this will change your eastern egg (note: you will have to download a game free of charge which will act as the flappy bird game in android 5.0 eastern egg)
8) Open root explorer > System > build.pro. Edit the build version from 4.4.4 to 5.0.1
9) Reboot
Done now you can enjoy a complete android 5.0 L experience in the elephone g6 before it gets actually released.
Tips:
To make the android lockscreen look better use Knock Code : http://repo.xposed.info/module/com.mohammadag.knockcode
Want better screen off and on animations? USe this app : http://repo.xposed.info/module/com.zst.xposed.screenoffanimation
Note: All the steps mentioned above should be used. skip any on your own risk
The above method is 100% safe and none of your apps or play store wont stop working
But still just to say, I WILL NOT BE RESPONSIBLE IF SOMETHING HAPPENS TO YOUR DEVICE DO IT ON YOUR OWN RISK
Any other questions? post in the comments section below and i will reply asap
Follow me on instagram : hiteshmodi65
Screenshots Attached
Have fun theming
Is this work on 4.2.2???
Welcome to the official thread for Intex Cloud Tread.
You can discuss anything related to the phone here. (All links are Google Drive and XDA)
Make: INTEX
Model: Cloud Tread
Stock ROM: Android 5.1
Kernel: 3.10.72 (Remember this while looking for ROMs to port)
SOC: MT6591 (The same as MT6592, so you can easily port ROMs)
RECOVERY
Type: TWRP
Version: 3.2.1 EXPERIMENTAL
Kernel: 3.10.72
Supports: MT6591/MT6592
Download (Note: Old backups doesn't' work with this one.)
*Might have a couple of bugs (CPU Temperature doesn't work, ADB Backup doesn't work), but works for backups and restores and flashing and mounting and ADB Sideloads. This is an experimental build. Use with caution.
Type: TWRP
Version: 3.1.0
Kernel: 3.10.72
Supports: MT6591/MT6592
Download New Fixed Version Download (Note: Old backups doesn't' work with this one.)
OLD Version (This was a half-assed port from Excite Prime that Identifies device as Excite Prime and has a lot of other bugs)
Download OLD Version
Instructions:
1. Download and install SP Flash Tools
2. Start it and go to Download tab.
3. Now, in the scatter loading file box open the SCATTER Text you downloaded. (Link below)
4. Make sure the drop down box is selected at Download Only.
5. Untick all boxes except recovery and double click on the location part of the recovery row.
*DON'T PLUG YOUR PHONE IN NOW*
6. Select the recovery you downloaded from here and click the Download button.
7. Now turn the phone off or remove its battery and plug it in.
The necessary drivers should install and wait for a few seconds until a green tick or circle comes on the screen.
There, one custom recovery for INTEX Cloud Tread has been flashed.
SCATTER FILE - Download (You will need it to use with SP Flash Tool)
If you want the STOCK RECOVERY download it from here.
ROOT
Type: SuperSU
Download
Instructions:
1. Copy the file to your SD Card.
2. Press Volume Up+Power to boot into recovery when the phone is off.
3. There go to Install > Select Storage > MicroSD > SuperSU.zip.
4. Un-check Reboot Automatically. (This may clear the dalvik-cache which is recommended but not necessary and might take some time to boot up the first time.)
5. Then Swipe to flash and reboot.
Congratulations! You are now rooted without the annoying KingUser.
XPOSED
Installer: v89 sdk 22
Download
Uninstaller: Download
Instructions:
Flash XPOSED using the same method used to flash SuperSU above.
After flashing Clear Dalvik-cache (Option is on the same screen) and boot into android and install below APK to manage XPOSED
XPOSED APK v3.1.5
Uninstallation Instructions are also the same.
STOCK ROM - Download
Flash with SP Flash Tools.
After flashing stock ROM from the above link, untick all the boxes and tick only the boot image section.
Now download and select this boot image and flash.
This is because the boot image included in the above linked ROM has screen flickering issues.
Intex Cloud Tread Battery and Performance Optimization
First download and flash this "IntexDebloat.zip" file.
It will remove the bloatware that came with the phone. (User uninstallable apps are not included)
Intex Keypad (Which when automatically updates to Mox Keypad is a privacy nightmare) is also removed. Use Gboard or the stock AOSP keyboard in the phone.
Now make sure you are rooted and have xposed installed.
Install these below apps from playstore or apkmirror or from anywhere
1. Greenify
2. Kernel Adiutor
3. L Speed
4. Busybox
5. Powernap 0.7a (optional) (and don't download the newer versions or update from play store)
After installing all of the above follow these tutorials in order.
#BusyBox - Preparing the phone
Open busybox, grant SuperUser permissions and install it. Now you can uninstall the app if you don't need it.
#Kernel Adiutor - Custom Governor Tunings
Disabling MTK Performance Service
This is one of those situations where a good idea is implemented in a not so good way. Performance service can provide you good performance at a very dear cost of battery life and it can also override or worse play along and consume more power with the below tweaks. So you should disable it before attempting these.
Open Kernel Adiutor, grant su permissions and in the sidebar goto build prop tab
There search for ro.mtk_perfservice_support
Change its value from 1 to 0.
Now we are going to tune the Governor.
Believe me when I say this I've been tuning this phone for over two years now with 100s of different configurations and these are the two best configurations for a balance between power consumption and performance.
Option one: Hotplug with rush function and fast sampling rate (My favorite)
Open Kernel Adiutor > CPU tab.
Make sure the governor is set to Hotplug.
Now change the following Governor tunables;
Code:
cpu_down_avg_times=20
cpu_down_differential=1
cpu_input_boost_enable=0
cpu_rush_boost_enable=1
cpu_rush_threshold=98
down_differential=5
sampling_rate=30000
up_threshold=99
This should give you good performance while maintaining good battery life
Option 2: Hotplug with no rush and high sampling rate (This is also good for battery life but a bit low on performance)
Code:
cpu_down_avg_times=20
cpu_down_threshold=20
cpu_input_boost_enable=0
cpu_rush_boost_enable=0
cpu_up_threshold=90
down_differential=5
sampling_rate=73000
up_threshold=97
No matter what you choose your battery life is hugely dependent on what you choose to do with your device. I usually get 5h of *continuous* SOT on auto brightness with these settings on WiFi and browsing. YMMV.
Some people might suggest setting
ignore_nice_load=1 for more battey life as well. But this phone kinda categorizes everything as nice processes and will only run on 1-2 cores @728MHz if you enable that without MTK Performance Service. It did got me more than 7h SOT but it was basically unusable.
Make sure you enable apply on boot on each page you change to make it apply on each boot!
Now go to I/O Scheduler tab.
There change scheduler to noop for internal storage and sd card if you have one.
Also goto settings and change the apply on boot delay to instant.
#LSpeed, Paget96's masterpiece!
Open L Speed, finish the tutorial without enabling anything and do as follows
Sidebar > Main section
Disable Debugging: Enabled
Window Animation Scale: 0.5x
Transition Animation Scale: 0.5x
(Don't change animator duration scale as it will mess up every animations in the device)
CPU Tuner
Don't enable anything in here, we already tuned our governor with our own values in Kernel Adiutor.
Battery
Battery Improvement: Enabled
I/O Tweaks
SD Tweak: Enabled (If you have a SD Card)
I/O Boost: Enabled
Partition Remount: Enabled
Disable I/O stats: Enabled
Don't enable scheduler tuner as we choose noop in kernel adiutor which can't be tuned!
RAM Manager
You will be tempted to change a lot of things here but don't. It will only make it worse. Just change the below settings
Virtual Memory Tweaks: Battery
Cache Reclaiming: 50%
OOM Killer: Enabled
OOM Dump Tasks: Disabled
Also you can do a fstrim as well if you would like to. No probs.
Now go to settings and chage the apply on boot delay to instant.
#Greenify
Install greenify, enable the module in xposed installer and restart. After boot, make sure you wait till L Speed and Kernel Adiutor apply their settings.
Now open greenify, goto its settings, xposed based features and enable the below
Wakeup timer coalescing
Telephony Wakeup
Greenifying System apps
Now go back, select add apps and on the top right corner, select the three dot button and choose Show All.
Now add every app in the phone to greenify. (Don't worry greenify only hibernates app that consumes battery, those who don't consume battery in the background will be shown as background free.)
Don't add the following apps:
Bluetooth
MTK NLP Service
Phone
Phone (System)
Google play Services
Google Play Services (Persistent)
Voicecommand
Download manager
Calendar storage
Play store
Google account manager
com.mediatek.voiceextension
Google backup transport
Google calendar sync
Google contacts sync
Kernel Adiutor
L Speed
Prevent Pocket Dials
Click to expand...
Click to collapse
^These will start again and will consume more battery if you hibernate them.
#Power Nap (Optional)
Only install v0.7a (link above).
It's the basic stuff. Install, enable in xposed installer, open, enable the first option, add L Speed and Kernel Adiutor to it's whitelist. And reboot.
And that's it! Make sure you add any new app you install to greenify. Some say you don't need to hibernate everything, only the rogue apps. But Greenify itself can decide whether it should hibernate an app or not. So that's fine.
This took me a long time to write and more importantly this took me two years of experimentations to find. (Especially the governor tunings). Hope you guys enjoy it.
In addition to this I also recommend using Nova Launcher as the stock launcher is basically adware and follow the usual "don't install every crap-booster-cleaner-app you see" advice to maintain your device.
Device not revealed.
When I start MTK Droid tool, it says,"The device isn't revealed. Connect or reconnect a cable." I waited for like half an hour still the issue persists.
MTK Droid doesn't work that easily with phones newer than KitKat because of an incompatible adb. The solution is to manually replace the adb while MTK Droid Tools is running to make it work.
You can use this script I made that will automate the process and saves you the hassle.
https://forum.xda-developers.com/android/general/fix-impossible-to-start-adb-error-t3582571
Remember: Keep the phone connected with USB Debugging enabled before using the above script.
If it fails, try again it will work. :good:
Ritesh Sachan said:
When I start MTK Droid tool, it says,"The device isn't revealed. Connect or reconnect a cable." I waited for like half an hour still the issue persists.
Click to expand...
Click to collapse
Bump! :highfive:
Yes it did work, but on running mtk droid tools the icon on the bottom left corner shows yellow colour. So to fix that I clicked on the ROOT option next to the ADB Terminal option. I granted the access through my phone. Few seconds later the icon turns green for few milliseconds and it quickly turns into red colour saying "CONNECTION LOST." Even though my device was connected with USB Debugging ON. HELP ME.
You cant use MTKDroid to root the phone. Try with TWRP and SuperSu.zip
Now even after rooting MTKDroid will report that the phone is not rooted.
That's another security feature of Android. The adbd interface will work on non root mode even after rooting. You have to install adbd insecure apk (paid on google play, but available for free here on its XDA thread) by chainfire to change it to root mode.
Link to adbd - https://forum.xda-developers.com/showthread.php?t=1687590
Adithya FRK said:
Welcome to the official thread for Intex Cloud Tread.
You can discuss anything related to the phone here. (All links are Google Drive and XDA)
Make: INTEX
Model: Cloud Tread
Stock ROM: Android 5.1
Kernel: 3.10.72 (Remember this while looking for ROMs to port)
SOC: MT6591 (The same as MT6592, so you can easily port ROMs)
RECOVERY
Type: TWRP
Version: 3.1.0
Kernel: 3.10.72
Supports: MT6591/MT6592
Download
Instructions:
1. Download and install SP Flash Tools
2. Start it and go to Download tab.
3. Now, in the scatter loading file box open the SCATTER Text you downloaded. (Link below)
4. Make sure the drop down box is selected at Download Only.
5. Untick all boxes except recovery and double click on the location part of the recovery row.
*DON'T PLUG YOUR PHONE IN NOW*
6. Select the recovery you downloaded from here and click the Download button.
7. Now turn the phone off or remove its battery and plug it in.
The necessary drivers should install and wait for a few seconds until a green tick or circle comes on the screen.
There, one custom recovery for INTEX Cloud Tread has been flashed.
SCATTER FILE - Download (You will need it to use with SP Flash Tool)
If you want the STOCK RECOVERY download it from here.
ROOT
Type: SuperSU
Download
Instructions:
1. Copy the file to your SD Card.
2. Press Volume Up+Power to boot into recovery when the phone is off.
3. There go to Install > Select Storage > MicroSD > SuperSU.zip.
4. Un-check Reboot Automatically. (This may clear the dalvik-cache which is recommended but not necessary and might take some time to boot up the first time.)
5. Then Swipe to flash and reboot.
Congratulations! You are now rooted without the annoying KingUser.
XPOSED
Installer: v87 sdk 22
Download
Uninstaller: Download
Instructions:
Flash XPOSED using the same method used to flash SuperSU above.
After flashing Clear Dalvik-cache (Option is on the same screen) and boot into android and install below APK to manage XPOSED
XPOSED APK v3.1.1
Uninstallation Instructions are also the same.
Recommended and tested Mods:
Ultimate Performance MOD by sohamsen (Tweaks - Flashable with TWRP)
BootManager (XPOSED Module)
GravityBox [LP] (XPOSED Module) (Requires dalvik-cache to be cleared after changing settings to avoid SystemUI crash)
Zeus Contextual Expanded Status Header (XPOSED Module)(Requires dalvik-cache to be cleared after changing settings to avoid SystemUI crash.
Android O (Oreo) Boot Animation by -CALIBAN666-
I made a flashable ZIP here. In case you want the stock animation back, flash this.
If you did encounter a SystemUI crash after enabling some XPOSED module you can boot into twrp and Deleting the folder 'conf' from /data/dev.robv.android.xposed.installer to disable the XPOSED modules without uninstalling it altogether.
Thanks: rovo89 for XPOSED for Lollipop.
If this guide has been helpful for you, please hit thanks.
Click to expand...
Click to collapse
Awesome work Adithya ..have been looking for custom recovery for quiet long....and your twrp worked like a charm..Thankyou....just need to point u out that supersu link is not working....keep-up the good work,will be looking forward for new custom roms for intex cloud tread from u.
jackquest said:
Awesome work Adithya ..have been looking for custom recovery for quiet long....and your twrp worked like a charm..Thankyou....just need to point u out that supersu link is not working....keep-up the good work,will be looking forward for new custom roms for intex cloud tread from u.
Click to expand...
Click to collapse
Thanks for pointing that out. I will fix it as soon as possible. Also updated some extra info about the tweaks.
i have used this boot animation (Android O (Oreo) Boot Animation by -CALIBAN666- ) ....its working perfect...thanks ... if possible upload stock rom to flash with sp flash tools(in case if phone brick) . i have tried mtk tools to backup and your zip" [FIX] 'It is impossible to start ADB' or 'Phone not revealed' error in MTKDROID Tools" ... no success ...cannot get root in mtk tools though my phone is rooted.
That is a safety measure. Install adbd insecure to enable root interface.
jackquest said:
i have used this boot animation (Android O (Oreo) Boot Animation by -CALIBAN666- ) ....its working perfect...thanks ... if possible upload stock rom to flash with sp flash tools(in case if phone brick) . i have tried mtk tools to backup and your zip" [FIX] 'It is impossible to start ADB' or 'Phone not revealed' error in MTKDROID Tools" ... no success ...cannot get root in mtk tools though my phone is rooted.
Click to expand...
Click to collapse
Stock ROM link added.
Adithya FRK said:
That is a safety measure. Install adbd insecure to enable root interface.
Click to expand...
Click to collapse
after install [2014.11.10][ROOT] adbd Insecure v2.00 i got root access on mtk tools though weird its not showing my imei numbers its button is gray...block map create scatter is gray
when i hit backup its trying to store preloader and other files on phone then error no space on phone ...only 1 file on comuputer backup its system...any way i got that repair mobile stock rom before its posted ,was not sure if its tested and safe to flash if needed
Before doing anything, please do a readback using SP Flash Tools. The scatter file is in the #1 post.
EDIT: MTKDroid never worked for me too, apart from making the scatter file.
Adithya FRK said:
Before doing anything, please do a readback using SP Flash Tools. The scatter file is in the #1 post.
EDIT: MTKDroid never worked for me too, apart from making the scatter file.
Click to expand...
Click to collapse
Thanks for the advice ,got my readback using sp tools.
Just a suggestion, TWRP is extremely good with backups. If you just want the stock ROM, goto TWRP>Backup>Tick all except data and cache. The backup size should be around 1.6 GB.
Note: SuperSU and Boot animation are in the system partition so that will also be in the backup.
Adithya can u edit EBR files ..in our phone EBR 1 is too small ....i know the method ..though not a geek to do it.
hope this link will help u even getting new roms to intex cloud tread ....... http://www.droidgyan.com/development/
jackquest said:
Adithya can u edit EBR files ..in our phone EBR 1 is too small ....i know the method ..though not a geek to do it.
Click to expand...
Click to collapse
To be fair, I am not really a geek myself. I did this because I was so desperate to get a recovery.
The EBR records doesn't seem to be too small (I got 171 apps installed) and still says I can have more.
You should try SD Maid Pro it really is a great app to clean the remains if you are rooted, you might get more space that way.
Still, it's good to learn something new and might be useful in the future if you could share how to modify the partition size.
EDIT: I can't really work on my phone now. It's kind of my day to day phone.
just go to the link http://www.droidgyan.com/development/ everything /lots of information for MTK chipset.
Updated.
Warnings about powersave governor added. (Post #2)
Next post will be about saving battery without radically affecting performance using SetCPU.