Hello, so I launched windows_fastboot_first_install_with_data_format instead of only the update.bat while already on latest stock ROM with Android 12 when installing Xiaomi EU rom. There were some write errors, cmd window just closed. Now I can't install anything. I am in bootloop, I can get into fastboot. But I can't even flash official stock rom using flash_all bat, it always ends up in writing error. What do I do? Thanks!
Code:
https://ctrlv.link/Rlbv
Edit: Fixed, XiaoMiTool V2 by Francesco saved me, I used it's unbrick device option, flashing went through and now I am back on stock android 12. But where did I go wrong? I watched youtube video and guy launched first_install bat file and it went through, but mine did not? Is it because version are slightly different? My stock rom is V13.0.1.0.SJUEUXM and Xiaomi EU is V13.0.3.0.SJUMIXM, is this a problem? Thanks!
"My stock rom is V13.0.1.0.SJUEUXM and Xiaomi EU is V13.0.3.0.SJUMIXM, is this a problem? Thanks! "
Global EEA ( europe ) : SJUEUXM
Global : SJUMIXM
I think because the bootloader was not unlocked before trying to change the firmware to another region
Related
Hi, I just found a thread on MIUI forum which inspire me
http://en.miui.com/thread-3450268-1-1.html
Kudos to the OP in that thread
I tried the tutorial to one of my friend's Note 5, the tutorial works, so now we know that DOWNGRADING FROM 8.82 GLOBAL TO 8.7.26 GLOBAL IS POSSIBLE
Now I need someone with bricked devices because of downgrading to try it, you must download fastboot room first and sideload it to your redmi note 5
Here is the summary and the short version of the already short tutorial (lol), also some fixes needed, for those stuck in "MIUI CANT BE INSTALLED ON THIS DEVICE" error AND NEED AUTHORIZATION CODE TO FLASH
ALSO FOR THOSE IN ANTI 4 WITH FAKE UBL (MAINLY DEVICES SOLD IN INDONESIA), WHO WANT TO FLASH CHINA ROM AND BIND THE MI ACCOUNT TO THE DEVICE TO LATER REQUESTING UNLOCK TO XIAOMI
FOR THOSE WHOSE DEVICES ARE BRICKED BECAUSE OF DOWNGRADING, YOU CAN TRY TO DOWNLOAD THE FASTBOOT ROM AND FLASH IT WITH THE SAME STEP, NEVER TESTED IT WITH EDL MODE, SO ANYONE?
1. Xiaomi Tool
2. XiaomiTool ADB
3. MI FLASH PRO
4. ROM GLOBAL 9.5.19
5. ROM GLOBAL 8.7.26
6. ROM GLOBAL 8.8.2
7. ROM CHINA 8.7.26
8. DRIVER2 QUALCOM, ADB DLL YG BISA DICARI DI POST LAIN
THE STEPS :
1. FLASH YOUR NOTE 5 TO 8.8.2 GLOBAL ROM USING MI FLASH PRO
2. OPEN CMD AND SIDE LOAD USING XIAOMITOOL ADB, COMMAND IS xiaomiadb sideload_miui<spasi>namafile.zip. WHICH IS miui_HMNote5HMNote5ProGlobal_8.7.26_d7fb438aef_8.1.zip. YOUR DEVICE WILL BE DOWNGRADED TO 8.7.2.6 GLOBAL ROM
3. NOW FLASH YOUR PHONE USING ANY TOOL LIKE XIAOMITOOL TO 8.7.2.6 CHINA
4. VOILA, IT WORKS NOW
don't know when Xiaomi will close this bug hole, so try it while you can
Tried to downgrade from 8.82 Global Rom to 8.726 Rom Global, later flashed the China 8.726 rom and it worked
It means we still can downgrade, I think this is a bug in xiaomi server, can anyone use this bug for our advantage?
Thanks
codearm2 said:
FOR THOSE WHOSE DEVICES ARE BRICKED BECAUSE OF DOWNGRADING, YOU CAN TRY TO DOWNLOAD THE FASTBOOT ROM AND FLASH IT WITH THE SAME STEP, NEVER TESTED IT WITH EDL MODE, SO ANYONE?
Click to expand...
Click to collapse
1. if your device was on china rom from the very begining. you flashed global rom over china rom without unlocking BL, and phone got bricked (This MIUI version can not be installed on this device)
Click to expand...
Click to collapse
There should have been note posted about that guide: -
NOT FOR DEVICES HARD BRICKED BY DOWNGRADING ON ARP!
You still need access to recovery/fastboot for that tutorial to work.
Hey I was experiencing some display issues so I flashed a custom ROM to test / narrow the problem (hardware issue sadly).
—Now I'm not sure how to revert back to completely stock as I've never unlocked the bootloader and worked much with fastboot.
On Samsung's you just download the official stock file, get Odin and put the file into AP, flash, done.
On one plus this is a bit different, first of all there's barely any mentioning of GM-1910 in the MSMDownloaderTool thread(s), I also don't want to have Hydrogen OS.
—My OP7Pro came with Oxygen OS pre-installed, GM1910 "international version" ← def. Chinese with oxygen flashed over it.
*What have you altered so far?*
Unlocked Bootloader/OEM
Flashed TWRP with fastboot
Flashed Havoc 3.0 OS, Magisk, OpenGapps
My perspective on the nature of special relativity.
*What do I want to reset?*
EVERYTHING, ROM, recovery, bootloader, you name it, I don't care about apps and pictures. worth noting I have a One plus Switch Backup, does that help?
Look for the MSM tool... that can reset the phone completely back to stock.
UpdateYourBrowser said:
Hey I was experiencing some display issues so I flashed a custom ROM to test / narrow the problem (hardware issue sadly).
—Now I'm not sure how to revert back to completely stock as I've never unlocked the bootloader and worked much with fastboot.
On Samsung's you just download the official stock file, get Odin and put the file into AP, flash, done.
On one plus this is a bit different, first of all there's barely any mentioning of GM-1910 in the MSMDownloaderTool thread(s), I also don't want to have Hydrogen OS.
—My OP7Pro came with Oxygen OS pre-installed, GM1910 "international version" ← def. Chinese with oxygen flashed over it.
*What have you altered so far?*
Unlocked Bootloader/OEM
Flashed TWRP with fastboot
Flashed Havoc 3.0 OS, Magisk, OpenGapps
My perspective on the nature of special relativity.
*What do I want to reset?*
EVERYTHING, ROM, recovery, bootloader, you name it, I don't care about apps and pictures. worth noting I have a One plus Switch Backup, does that help?
Click to expand...
Click to collapse
You can use the fastboot ROM or Guac (MSM tool for oxygen OS). Links below:
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
or
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
Good luck!!
Gr8man001 said:
You can use the fastboot ROM or Guac (MSM tool for oxygen OS). Links below:
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
or
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
Good luck!!
Click to expand...
Click to collapse
excuse my stupidity but given that I want to get rid of my custom ROM and back to stock oxygen which tool do I have to use?
secondly all images (androidfilehost) for the second link are for GM1911,17,13,15 but mine is 1910 which is not listed, what do I do now?
UpdateYourBrowser said:
excuse my stupidity but given that I want to get rid of my custom ROM and back to stock oxygen which tool do I have to use?
secondly all images (androidfilehost) for the second link are for GM1911,17,13,15 but mine is 1910 which is not listed, what do I do now?
Click to expand...
Click to collapse
I am sorry but I am not familiar with Chinese stock ROMs. For some reason, I got the impression that you wanted to restore it to an international version and not the Chinese/HK version. You may want to post a question in the OnePlus community forum or check out their download section for your specific model.
https://forums.oneplus.com/forums/oneplus-7pro-support/
Gr8man001 said:
I am sorry but I am not familiar with Chinese stock ROMs. For some reason, I got the impression that you wanted to restore it to an international version and not the Chinese/HK version. You may want to post a question in the OnePlus community forum or check out their download section for your specific model.
https://forums.oneplus.com/forums/oneplus-7pro-support/
Click to expand...
Click to collapse
no no I want to restore it to international version, the phone itself is GM1910. should I flash GM21AA file or the global file?
I think I will go with the global file, makes most sense in this moment
UpdateYourBrowser said:
no no I want to restore it to international version, the phone itself is GM1910. should I flash GM21AA file or the global file?
I think I will go with the global file, makes most sense in this moment
Click to expand...
Click to collapse
GM21AA should be fine. If you decided to use the MSM tool (the one in the first link), hardest part is to get the L2/qualcomm drivers installed on your PC with the method described. Alternatively you can download and install the drivers yourself which will make the job easier. This will LOCK your bootloader and wipe off everything on your phone. You will get a brand new phone running 10.0.3 OS
Easiet way would be to go fastboot ROM route. It will also wipe your phone but won't lock the bootloader. Once installation is complete you could use the adb command to lock the bootloader. It's one extra step but may be much easier IMO. Download the zip file on PC>unzip it>Hit flash all bat file while the phone is connected in the fastboot mode. You may get some error messages regarding header parsing, ignore them and sit tight until your phone boots.
Good luck!!
WORKS NOW! Can confirm this reverts all back to stock (it will revert back to Oxygen OS (OOS) 9.5 so you'll have to update to Android 10 via OTA if you want)
For anyone wondering, I had Android 10 installed before / Havoc 3.0 and the MSMTool will revert you back to Oxygen OS 9.5. Widevine jumped back to L1 so everything should be stock.
If you have any questions, don't wait, I am sure someone out there had the same questions/issue as me and I hope this will help you.
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
UpdateYourBrowser said:
WORKS NOW! Can confirm this reverts all back to stock (it will revert back to Oxygen OS (OOS) 9.5 so you'll have to update to Android 10 via OTA if you want)
For anyone wondering, I had Android 10 installed before / Havoc 3.0 and the MSMTool will revert you back to Oxygen OS 9.5. Widevine jumped back to L1 so everything should be stock.
If you have any questions, don't wait, I am sure someone out there had the same questions/issue as me and I hope this will help you.
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
Click to expand...
Click to collapse
Hey, I have a problem, I re-locked the bootloader, it is currently blocked, but my Widevine status is still L3, can you tell me if you used MsmTool first and then you did relock, or did you block the bootloader first?
Please help.! My Mi note 10 pro cant flash any version of Xiaomi.eu base on Android 11.
I unlocked my Bootloader yesterday. After flash Twrp (LR, Fox, 3.4, 3.5)/Wipe/ flash Eu (Weekly/stable base on Android 11)/ format data and reboot. My phone will bootloop in Powered by Android screen.
Miflash work fine with global 12.0.3 (Android 10) and RR Rom (Android 10) boot fine. But my phone will get bootloop (At Powered by android screen) if I flash Miui China 12.1.3 (Android 11) via Miflash.
Mi flash alway get error "remote update sparse crc list failed" if i try to flash fw package of Android 11 via Twrp. Flash fw package of Android 10 to fix
Im sorry for my bad English. But, please tell my how to flash Xiaomi.eu 12.5 on my My note 10 pro
Edit flash.all script, delete two line that have this crc list and try again. Open folder that you extract for flash find fike flashall.batgo to edit and delete two line with content CRC. hope that will help you.
saigetshu said:
Edit flash.all script, delete two line that have this crc list and try again. Open folder that you extract for flash find fike flashall.batgo to edit and delete two line with content CRC. hope that will help you.
Click to expand...
Click to collapse
My phone still bootloop after miflash complete install a rom base on Android 11
KimUyLong said:
Please help.! My Mi note 10 pro cant flash any version of Xiaomi.eu base on Android 11.
I unlocked my Bootloader yesterday. After flash Twrp (LR, Fox, 3.4, 3.5)/Wipe/ flash Eu (Weekly/stable base on Android 11)/ format data and reboot. My phone will bootloop in Powered by Android screen.
Miflash work fine with global 12.0.3 (Android 10) and RR Rom (Android 10) boot fine. But my phone will get bootloop (At Powered by android screen) if I flash Miui China 12.1.3 (Android 11) via Miflash.
Mi flash alway get error "remote update sparse crc list failed" if i try to flash fw package of Android 11 via Twrp. Flash fw package of Android 10 to fix
Im sorry for my bad English. But, please tell my how to flash Xiaomi.eu 12.5 on my My note 10 pro
Click to expand...
Click to collapse
I use orange fox and never had a problem. I'm on the last beta with last magisk beta.
Hello guys, I installed Pixel experience custom on my poco x3 a few weeks ago. After few days, I tried to update the PE custom from but it showed failed "error 1" so, I skipped and forget about the update and kept using the phone.
Yesterday, I decided to go back one MIUI. I downloaded MIUI for my POCO X3 EEA version. I couldn't install it too, as it always showed "error 1". and starting yesterday, the phone bootlooped in fastboot.
Today, I tried to install the Official Miui Rom using MiFlashtool but always the same issue. First I tried installing the global official rom, it didn't work, then, installing EEA version but same thing.
Someone here can help me on that matter please, I never get an idea in how to fix that issue.
Thank you so much in advance for your help
what do you mean by "it didn't work" when installing official MIUI ROM using MiFlashTool? what error do you get etc and maybe you can provide some screenshots
installing official MIUI Fastboot ROM should fix your issue but maybe you did not do the right procedure
Syfer_Fever said:
what do you mean by "it didn't work" when installing official MIUI ROM using MiFlashTool? what error do you get etc and maybe you can provide some screenshots
installing official MIUI Fastboot ROM should fix your issue but maybe you did not do the right procedure
Click to expand...
Click to collapse
yes this is so strange, cuz miflash always a better way to fix bootloop phone , i think he may upgrade PE ROM with a dirty flash that cauzed bootloop, even its bad their twrp is removed < real problem
flash via miui with UBL UNLOCK!!!
Hi all,
I've unlocked my bootloader, installed the EU ROM and found too much missing for my liking. I was unable to load Gapps due to TWRP issues and I'd like to return back to the global ROM but i'm struggling:
1) I'm not 100% sure I've got the global ROM, I've come across 3x separate links (more exist) that have different global ROMS, what is the official ROM link? (there is even multiple global ROM like Taiwan, Indonesia, EEA, Russia, turkey...) Link 1 Link 2 Link 3.
2) When attempting to follow Xiaomi community guide and using their own unique ROM link, MiFlash errors during installation due to error: "Antirollback check error". People discuss editing batch files which aren't there and at this point im too afraid to brick my device.
Please help, i'd like to reflash the global ROM in a safe manner and i'm not sure how best to go about doing this
1) I recommend stock rom, not custom rom.
The link is a custom rom.
I use the normal global rom version, not for a specific country.
2) I write directly in fastboot mode, not using the miflash tool.
Extract the ROM file and run the flash_all.bat file.
https://c.mi.com/oc/miuidownload/detail?guide=2
Thanks, i'm assuming the stock ROM is from the same link?
I've tried using flash_all.bat however the command prompt that runs immediately shuts after executing. I assume its again due to the anti roll back checks. How can i stop this and more importantly is there a risk of bricking if messed with?
Edit: Got it working eventually. For anyone else in the same position don't use Powershell. Use Windows command prompt, "cd" to the directory of the extracted Zip. Just run "flash_all.bat" from command prompt and let it run.
Thanks osebee