I purchased a Galaxy S7 online, came with a T-Mobile receipt showing the device is paid in full, upon my request the original owner used the unlock app to request a permanent unlock before shipping and it was successfully unlocked. I received the device about 3 days ago everything works as it should, I opened the unlock app just to double check and requested a permanent unlock again and got this message (Unlock Failed: This mobile wireless device is not eligible for unlock etc...) I know the device is unlocked I tried an inactive AT&T sim and did not request a code. Anyone can tell me why the unlock app does not recognize that the device is unlocked, thanks in advance.
You might have to call t-mobile or log in to your t-mobile account and see the unlock status or your device..how do u know the original owner was able to successfully unlock the phone? It's it works with another carrier sim then the phone sld be unlocked and it sldnt be an issue..maybe it's giving up the error msg since it's already unlocked
Sent from my SM-G930F using XDA-Developers mobile app
99% certain that if the device is unlocked, the device is simply unlocked and that's that. If the SIM works you're good to go and any further attempts fail.
Finally T-Mobile website updated the status of the device as unlocked and can be used with any GSM network, but the unlock app still fails to show that, every time I try I get the same message (Unlock Failed) anyone out there has a fix for this error?
Not sure I understand your question.... the phone is already unlocked so the unlock app will give u an error message....cause it's already unlocked...Good luck man...
Sent from my SM-G930F using XDA-Developers mobile app
I have my Samsung Galaxy S7 Unlocked by app. If I try the unlock app process again I'll get the (unlock failed) that means nothing. Put a active simple of another GM Carrier, if it works you are all set. It won't ask to give any code, it will just recognize the other Carrier. Hope this helps.
Sent from my SM-G930T using Tapatalk
I have read some articles here and there like this one for example http://forum.xda-developers.com/mate-8/general/guide-how-to-unlock-frp-free-t3388810 it advices to enable oem unlock to get rid of frp lock, but after many trials I can say unfortunately there is no relation between oem unlock option and the frp lock http://gadgetguideonline.com/androi...ollipop-5-1-when-you-do-a-factory-data-reset/
The problem is I don't know the solution so I hoped some of the developers out there can help us because it is really hard to find info for the huawei smartphones online.
I have an L-29c185 I was able to unlock the bootloader and root the phone on emui 4.0 and I installed kangvip slim and used it until update b353 (13-7) then I flashed the original firmware L-29c185b320 zip file in twrp and flashed it again using dload method until the logo of "Your device has been unlocked and can't be trusted" has disappeared.The problem is that I can not unlock the bootloader again, frp is always locked although I entered the same google account with the same password nothing had changed .
The phone is working good I only want to root it, I removed the google account and factory reset the phone many times with no help the frp is always locked.
Did you find a solution? I have exactly the same problem.
Search for no fuss and give it a try
So recently I have gotten a Note5 , which my friend has had sitting around and I bought it off him but he had forgotten his home password. So I did a Factory Reset but didn't know his old email and now I have tried bypassing the FRP method but none seem to work. It would be very grateful if someone can help me and.......... Also would flashing it back to its original image 5.1.1 help delete the FRP LoCK? :crying::
Turn on OEM Unlock in Developer Options...
sinisin said:
Turn on OEM Unlock in Developer Options...
Click to expand...
Click to collapse
How can he do that if he cant get past frp lock?
I am curious myself to see how thTs done
isn't that there's a way to bypass it by connecting phone to computer and run sidesync on the computer?
....
Not sure if this method still works but that's how I bypassed a samsung core prime last month.
Also you need to list what methods you used so others can see what you used and see if they have any new ideas.
He needs to restore a back up, or reflash a stock tar. There are literally 10 threads on this. FRP only shows up when someone who has rooted turns off OEM Unlock. I know, cuz I did. Flashing stock tar or a backup will either allow the software to bypass the lock, or restore software that has OEM Unlock turned on..
Hi,
I have a few questions about the FRP lock and the OEM lock on the Galaxy s6 running Nougat. I hope someone can help as I've not been able to find answers to questions this specific.
Ok, so, my first question is does the Galaxy s6 even have an OEM unlock option? If so, is it enabled by default?
Quick story before the other questions. I flashed TWRP and the sorts onto my s6 but decided to go back to stock and so flashed the stock firmware from sammobile through odin mode. After doing so I assumed the stock recovery would be restored and the phone would be as good as new right? As in all the FRP and OEM lock security features would be restored?
However, I did some research and found out that you can flash the stock firmware AGAIN as long as the firmware was signed by samsung even if OEM unlock is not checked.
My last question would be if someone was to use odin mode to flash the stock firmware, which is freely available, would the phone not ask for the previous Google account which was signed in on the device?
Hope is wasn't too hard to understand, I'm typing on my old S3 mini as I lost my s6 which is the reason I can't go and test this myself.
Thanks in advance
- There's no OEM lock on S6 (at least on international models). So, there is no OEM unlock option.
- If the bootable images (kernel and recovery) on your phone is Samsung signed, you can use FRP.
- If you want to revert the device to completely stock, I recommed that you should install a 4-part firmware.
- If FRP lock is not enabled on your device, phone won't ask anything about Google account (or Samsung account).
forumber2 said:
- There's no OEM lock on S6 (at least on international models). So, there is no OEM unlock option.
- If the bootable images (kernel and recovery) on your phone is Samsung signed, you can use FRP.
- If you want to revert the device to completely stock, I recommed that you should install a 4-part firmware.
- If FRP lock is not enabled on your device, phone won't ask anything about Google account (or Samsung account).
Click to expand...
Click to collapse
Hi,
Thanks for the informative reply. I have just one more question.
If I had enabled FRP through the Samsung Pass settings with my Samsung account and then I was to flash stock firmware on to the phone, would the Samsung FRP lock prevent the user from using the device by asking for the email and password or would the new firmware get rid of any of the security measures put in place?
I understand the FRP lock files are stored on a hidden partition not wipeable through the stock recovery however considering signed firmwares are freely available it would seem to me that the FRP lock would be deemed useless if anyone could just do that.
I guess my final question would be do signed firmwares downloaded online and flashed over the existing firmware wipe the FRP lock partition of the phone?
Thanks again for your reply
Haroon786 said:
Hi,
Thanks for the informative reply. I have just one more question.
If I had enabled FRP through the Samsung Pass settings with my Samsung account and then I was to flash stock firmware on to the phone, would the Samsung FRP lock prevent the user from using the device by asking for the email and password or would the new firmware get rid of any of the security measures put in place?
I understand the FRP lock files are stored on a hidden partition not wipeable through the stock recovery however considering signed firmwares are freely available it would seem to me that the FRP lock would be deemed useless if anyone could just do that.
I guess my final question would be do signed firmwares downloaded online and flashed over the existing firmware wipe the FRP lock partition of the phone?
Thanks again for your reply
Click to expand...
Click to collapse
Phone will ask Samsung or Google account only if you wipe the data (we assume that FRP lock has been enabled before wiping the data).
If you don't wipe the data while flashing any firmware while installing (or the firmware you try to flash doesn't wipe the data), phone won't ask you anything.
And, if FRP lock enabled on the device, bootloader will deny to boot (or flash) the unsigned kernel or recovery.
There's no way to wipe FRP lock via Odin.
So, we can say that FRP lock is pretty secure.
Yeah
But u can easy **** with samsung when u flash stock 5.0 with odin and on pc have sidesync or someting like that samsung suck because with that tutorial u can bypass frp really easy
JirkaPirkl said:
But u can easy **** with samsung when u flash stock 5.0 with odin and on pc have sidesync or someting like that samsung suck because with that tutorial u can bypass frp really easy
Click to expand...
Click to collapse
:/
well here's hoping a typical phone thief doesn't know how to do that....
Quick question though, can an S6 be factory restored if the user only used the phone's PIN from the lock screen to the factory reset option in the settings app? Or would you be prompted to use your fingerprint? I read somewhere that factory restoring a device through the settings app disables the innate android FRP but i don't know if it's also the case with Samsung reactivation lock which is supposedly similar to FRP.
Thanks for the replies I appreciate it
Read on the way out from house !!!
Sorry for my bad but im now on the way but 1 yeah u will need maybe fingerprint for turn off reactivation ( frp) but first when u lost your phone use samsung accound on the browser for track lock etc 2 for factory reset u need only turn off phone and go to the recovery mode
I got S7 SM-G930L with a port Rom from S8 (https://forum.xda-developers.com/s7-edge/development/rom-s8-port-s7-s7-edge-ambasadii-t3619548). When I power on the phone I get a message: Custom binary blocked by FRP Lock.
I would like to get rid of the FRP Lock without losing my data.
I saw a video https://www.youtube.com/watch?v=VdAhu45UPsU According to the comments 40% lost their data and 60% didn't.
Could you please advise how to make sure that my data won't be lost?
Blackion said:
I got S7 SM-G930L with a port Rom from S8 (https://forum.xda-developers.com/s7-edge/development/rom-s8-port-s7-s7-edge-ambasadii-t3619548). When I power on the phone I get a message: Custom binary blocked by FRP Lock.
I would like to get rid of the FRP Lock without losing my data.
I saw a video https://www.youtube.com/watch?v=VdAhu45UPsU According to the comments 40% lost their data and 60% didn't.
Could you please advise how to make sure that my data won't be lost?
Click to expand...
Click to collapse
If there's an option for OEM Unlock in developer settings enable that to disable FRP
But how do I boot my phone? Now I'm getting a red message: Custom binary blocked by FRP Lock and the phone is not booting past that. It will not even let me in TWRP.
Blackion said:
But how do I boot my phone? Now I'm getting a red message: Custom binary blocked by FRP Lock and the phone is not booting past that. It will not even let me in TWRP.
Click to expand...
Click to collapse
reflash the stock fw using odin
Not sure
I was said that because I'm using a port of S8 on S7, after I'll reflash stock ROM the data might be lost due to differences of memory formats.
Is it true?
Blackion said:
I was said that because I'm using a port of S8 on S7, after I'll reflash stock ROM the data might be lost due to differences of memory formats.
Is it true?
Click to expand...
Click to collapse
If you haven't backed up your data, it will be lost.
When you get yourself back out of this mess, don't touch that OEM unlock toggle again...
Blackion said:
But how do I boot my phone? Now I'm getting a red message: Custom binary blocked by FRP Lock and the phone is not booting past that. It will not even let me in TWRP.
Click to expand...
Click to collapse
(sorry for the english but i'm italian) hi. i have the same problem, can you help me? i root my phone and after i unroot, but now the phone don't boot, it say custom binary blocked by frp, i understand that my bootloader is lock by oem, there is a way to unlock by odin or others method? i can't have access to recovery and the phone don't boot, what can i do?
corvasce03 said:
(sorry for the english but i'm italian) hi. i have the same problem, can you help me? i root my phone and after i unroot, but now the phone don't boot, it say custom binary blocked by frp, i understand that my bootloader is lock by oem, there is a way to unlock by odin or others method? i can't have access to recovery and the phone don't boot, what can i do?
Click to expand...
Click to collapse
I used smartswitch when I encountered frp lock
https://www.blogtechtips.com/2017/06/24/easily-restore-samsung-device-firmware-with-smart-switch/
1eStar said:
If you haven't backed up your data, it will be lost.
When you get yourself back out of this mess, don't touch that OEM unlock toggle again...
Click to expand...
Click to collapse
@1eStar
Firstly I have a question regarding the OEM unlock as I just came out of the FRP Lock. Do I turn on OEM unlock or does it have to be turned off? Last time I had this FRP Lock was a year ago though did it again(the mistake with the OEM unlock) as I had forgotten it(Lots of grey hair)
Just don't know if it has to be on or off?
Secondly I have managed to come out of it(so far , hopefully) without wiping data with this guide
kiwigi said:
@1eStar
Firstly I have a question regarding the OEM unlock as I just came out of the FRP Lock. Do I turn on OEM unlock or does it have to be turned off? Last time I had this FRP Lock was a year ago though did it again(the mistake with the OEM unlock) as I had forgotten it(Lots of grey hair)
Just don't know if it has to be on or off?
Secondly I have managed to come out of it(so far , hopefully) without wiping data with this guide
Click to expand...
Click to collapse
To unlock your device by frp lock you must flash the stock firmware when you are in bootloader mode you see custom binary blocked by frp,if you try to flash a random firmware(always of your device) the operation may not be a good end and device say an error with this:
Knumber) Snumber) Bnumber)
When you go to download the stock firmware you must see the "code" Of the firmware with write the same S or B number
If you Don't understand see the 10th post of this thread
https://forum.xda-developers.com/galaxy-s8+/help/custom-binary-blocked-frp-lock-regular-t3745085
corvasce03 said:
To unlock your device by frp lock you must flash the stock firmware when you are in bootloader mode you see custom binary blocked by frp,if you try to flash a random firmware(always of your device) the operation may not be a good end and device say an error with this:
Knumber) Snumber) Bnumber)
When you go to download the stock firmware you must see the "code" Of the firmware with write the same S or B number
If you Don't understand see the 10th post of this thread
https://forum.xda-developers.com/galaxy-s8+/help/custom-binary-blocked-frp-lock-regular-t3745085
Click to expand...
Click to collapse
@corvasce03
Thanks.
I think I got back allright except this here and I used exactly the same stock(file) as a year ago
Someone Help My Soul!!!
Guys, I'm scared to death on letting my phone reboot, I have been told to never let my phone restart unless my google account has been removed, can someone please explain how this FRP block really works?
Am I at risk at every given point of phone restart for real?
Cirphrank said:
Guys, I'm scared to death on letting my phone reboot, I have been told to never let my phone restart unless my google account has been removed, can someone please explain how this FRP block really works?
Am I at risk at every given point of phone restart for real?
Click to expand...
Click to collapse
It stops someone stealing your phone, wiping it, installing new firmware and using it as if it was new. If you know the gmail and password you put on the phone to access the play store then you just need to re-enter it after the phone restarts. FRP will only kick in if you have flashed new firmware to the phone.
I have a new firmware flashed on the phone.
And I'm using a new gmail with is, not some one July bro used on it.
What am I to do now? I have developer settings OEM unlock toggled on already.
Cirphrank said:
And I'm using a new gmail with is, not some one July bro used on it.
What am I to do now? I have developer settings OEM unlock toggled on already.
Click to expand...
Click to collapse
I'm not sure what you mean. If you have a Google account on the phone that you know the email and password to, then just reboot the phone. FRP lock will only activate if you flash new firmware to the phone without removing the Google account first.
Your device should only have 1 Google account registered on the device which let's you access Play store etc. If there is more than one, you need to delete the ones you don't know the email and password to.
Okay...
Oh, okay, now I am getting the rationale.
Albeit, when I flashed in the new custom firmware, it started give me the undo changes by restarting your phone notification, like it did the first time ever that I got the lock. I didn't click it, activated an app that discarded the notification rather.
Now it makes me doubt if I had really removed my mail before flashing the phone.
hey
i have got the same problem. when i deleted xposed installer, my device rebooted. every time i try to turn it on, it says in top left corner 'custom binary blocked by frp lock'. i tried 3 diff rom to flash, no succes. i tried to acces twrp (my device is rooted) but again no succes. can you guys help me?
i have a G930F
thanks.
stasikkk777 said:
i have got the same problem. when i deleted xposed installer, my device rebooted. every time i try to turn it on, it says in top left corner 'custom binary blocked by frp lock'. i tried 3 diff rom to flash, no succes. i tried to acces twrp (my device is rooted) but again no succes. can you guys help me?
i have a G930F
thanks.
Click to expand...
Click to collapse
Yeah you've messed it up by not signing out of account before unistalling xposed. When you say 3 different rom's do you mean stock or custom?
Even in this state you should be able to flash a stock rom to the device with Odin and it will ask you to type the google email and password after boot.
Always turn off FRP lock before modifying the phone, it's a really annoying feature.