Database Info

problem installation lineageos

Hi all, i have a problem whan i install lineage os, i don't have any system on my oneplus one and i want install lineage but when the installation has finished, my phone restart and freeze on logo one plus one android powered.
if you have a solution ;D
good night

LucasJahier said:
Hi all, i have a problem whan i install lineage os, i don't have any system on my oneplus one and i want install lineage but when the installation has finished, my phone restart and freeze on logo one plus one android powered.
if you have a solution ;D
good night
Click to expand...
Click to collapse
Which firmware were you on? Which recovery you used?
Did you tried previous lineage os nightly's?

I don't know what firmware i m and i have try with the latest nighly release. And i use the latest version of twrp

LucasJahier said:
I don't know what firmware i m and i have try with the latest nighly release. And i use the latest version of twrp
Click to expand...
Click to collapse
Go to setting > about phone and see Baseband version.
If you're coming from CM13.1 make sure to wipe everything except internal storage.
Download the ROM again if possible (the version you have downloaded may be corrupted) from the Lineage os official site and gapps(micro or pico).
Flash the ROM first and then gapps.
Reboot your device.
If you want the Root access download the Su add-on from the Lineage website also.
Hope it will work.
Let us know.
Thanks.

Re
Re,
Sorry... but i don't have any os in my oneplus one... he is empty exept zip the lastest version of official website and zip of gapps.
Thank you

[ROM] [UNOFFICIAL] Lineage OS 14.1 with full OMS for the Shield Tablet

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's the catch, we have Official LOS builds?:
These are home baked builds of LineageOS with full Substratum support. It supports the rootless operations of Substratum as well as all of its features. It will be Pure LineageOS and as such, bug reporting won't work for this one.
All the bugs that you face will either be of LineageOS or if any themeing one than it would be from Substratum. [Well there aren't any as of now]. Builds will be either weekly or daily or as new changes merge in OR depending upon my upload to the server was successful or not.
Frequently Asked Questions
1.1 Q: Can I dirty flash over from official LineageOS?
1.1 A: No, a clean flash is required as their builds are signed with private keys.
1.2 Q: Can you merge ABC feature from XYZ ROM?
1.2 A: No. This is stock Lineage with full OMS support, that is it.
1.3 Q: I have LMN bug, please fix!
1.3 A: Wait till either the Lineage Team or the Substratum team fixes it. Till then live your life dangerously....
1.4 Q: How do I see what is new every release?
1.4 A: https://www.cmxlog.com/14.1/shieldtablet/
1.4 B: https://github.com/LineageOMS
1.5 Q: What root should I flash?
1.5 A: It's up to you, as root is only required for boot animations. There are four options:
SuperSU
Magisk
phh's SuperUser
Lineage's SU
Downloads:
ROM: LineageOS on the G Drive
GAPPS: use OpenGapps or any of your preferred choice, 7.1 ARM; pico preferred.
ROOT: see above
Instructions :
Download the latest build and gapps
Reboot to recovery
Flash the latest build and gapps
Reboot. Profit.
Credits:
The Official LineageOS Team
The Substratum Repo Guys
TheMuppet Guys
Many Thanks to:
Steel01: For helping me figure out how to merge.
BitOBSessiOn: The guy who is always ready to help irrespective of time and number of questions.
XDA:DevDB Information
Lineage OS 14.1 with full OMS, ROM for the Nvidia Shield Tablet
Contributors
Mohammad Siddique
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Lineage OS
Version Information
Status: Nightly
Created 2017-07-13
Last Updated 2017-07-13

Hi, recently purchased an already rooted shield tablet
running 7.0
software 5.0
TWRP 3.1.0
I would like to flash without PC (looks fine) is that doable?
I am also unsure if I need to flash a root method after flashing rom and gapps since I am already rooted?
What about any root ad-ons like referenced in the official version?
thanks in advance (thank you button will be hit!)

jlipps75 said:
Hi, recently purchased an already rooted shield tablet
running 7.0
software 5.0
TWRP 3.1.0
I would like to flash without PC (looks fine) is that doable?
I am also unsure if I need to flash a root method after flashing rom and gapps since I am already rooted?
What about any root ad-ons like referenced in the official version?
thanks in advance (thank you button will be hit!)
Click to expand...
Click to collapse
Since you already have TWRP, you can go ahead and flash any rom of your choice, no PC required of course, just download it in your device, and flash via TWRP, for root as mentioned you can flash any zip of your choice to achieve the root, and what root add-ons are you referring to ?

lineage-14.1-20170715-UNOFFICIAL-shieldtablet uploaded to the G Drive with latest OMS patches

Mohammad Siddique said:
Since you already have TWRP, you can go ahead and flash any rom of your choice, no PC required of course, just download it in your device, and flash via TWRP, for root as mentioned you can flash any zip of your choice to achieve the root, and what root add-ons are you referring to ?
Click to expand...
Click to collapse
So do I need to flash a root zip to re-gain root after flashing this rom? I am already rooted so I am confused about this process. And the root add-ons seem to be useful and/or necessary with LOS official roms, there is a download link to add-on zip on page one of Steel01 official LOS thread.

jlipps75 said:
So do I need to flash a root zip to re-gain root after flashing this rom? I am already rooted so I am confused about this process. And the root add-ons seem to be useful and/or necessary with LOS official roms, there is a download link to add-on zip on page one of Steel01 official LOS thread.
Click to expand...
Click to collapse
Yes, to regain root you'll need to flash, and that root addon from LOS page will enable the inbuilt root access which can be found in development settings. If using that then no other is required to flash

Hey man, how would you go about building and merging OMS-7 for your ROM? I've been building myself a nice build of LineageOS for my OnePlus 5 with some extra mods but I haven't found out (properly) how to implement OMS yet.
Any help would be appreciated, thanks.

Interceptor777 said:
Hey man, how would you go about building and merging OMS-7 for your ROM? I've been building myself a nice build of LineageOS for my OnePlus 5 with some extra mods but I haven't found out (properly) how to implement OMS yet.
Any help would be appreciated, thanks.
Click to expand...
Click to collapse
https://github.com/LineageOMS either merge or download,
if you scroll down and see there will be merge script, or the easiest
https://forum.xda-developers.com/apps/substratum/reference-lineageos-substratum-support-t3580276
follow this step, I successfully did that using the third step EasyPeasy
And Good Luck with your build )

Hi!
When I try flashing, it tells me that it needs bootloader version 4.0.0 ... but the only bootloader I can download on from webgeek1234 either give me bootloader version 3.1.1 or 4.0.1 ... so installation fails. Installing LineageOS 13.0 doesn't complain about bootloader...
Am I missing something?

ggravier said:
When I try flashing, it tells me that it needs bootloader version 4.0.0 ... but the only bootloader I can download on from webgeek1234 either give me bootloader version 3.1.1 or 4.0.1 ...
Click to expand...
Click to collapse
Bootloader version doesn't match the stock rom version number. The bootloader it wants is the N or stock 5.0 one. I should probably make that more clear in my post...

Steel01 said:
Bootloader version doesn't match the stock rom version number. The bootloader it wants is the N or stock 5.0 one. I should probably make that more clear in my post...
Click to expand...
Click to collapse
Hi!
OK. So... how can I get, and how do I install the N bootloader on my SHIELD? I didn't see it documented.
Thanks!

It's linked in the opening post to my Lineage thread.

Steel01 said:
It's linked in the opening post to my Lineage thread.
Click to expand...
Click to collapse
Hi!
Here? On th is thread? The only thing I see is :
ROM: LineageOS on the G Drive
GAPPS: use OpenGapps or any of your preferred choice, 7.1 ARM; pico preferred.
ROOT: see above
But nothing about bootloader. Another thread maybe?
Gilles.

ggravier said:
Hi!
Here? On th is thread? The only thing I see is :
ROM: LineageOS on the G Drive
GAPPS: use OpenGapps or any of your preferred choice, 7.1 ARM; pico preferred.
ROOT: see above
But nothing about bootloader. Another thread maybe?
Gilles.
Click to expand...
Click to collapse
https://forum.xda-developers.com/shield-tablet/development/rom-lineageos-shield-tablet-t3562839
He clearly mentioned his thread, here it is:
in the downloads section Firmware
doing a stock update to come to Nougat is safe. DL the file and flash via recovery then do a reboot recovery and then retry flashing.

Mohammad Siddique said:
https://forum.xda-developers.com/shield-tablet/development/rom-lineageos-shield-tablet-t3562839
He clearly mentioned his thread, here it is:
in the downloads section Firmware
doing a stock update to come to Nougat is safe. DL the file and flash via recovery then do a reboot recovery and then retry flashing.
Click to expand...
Click to collapse
So I posted on his thread... it doesn't work on my device.

ggravier said:
So I posted on his thread... it doesn't work on my device.
Click to expand...
Click to collapse
You tried flashing the zip? or just extract the blob file from the zip and fastboot flash it, profit.

Mohammad Siddique said:
You tried flashing the zip? or just extract the blob file from the zip and fastboot flash it, profit.
Click to expand...
Click to collapse
I did same procedure as for versions 311 and 420 from webgeek1234 : put the zip on the SD. Boot to TWRP. Use the "install" function to install the ZIP. It works for 311 and 420... but when I do it with version 50... the output of the installation just says "succeded" and after, when trying to install Lineage, it says version unknown.

ggravier said:
I did same procedure as for versions 311 and 420 from webgeek1234 : put the zip on the SD. Boot to TWRP. Use the "install" function to install the ZIP. It works for 311 and 420... but when I do it with version 50... the output of the installation just says "succeded" and after, when trying to install Lineage, it says version unknown.
Click to expand...
Click to collapse
That's why I'll recommend you to go on stock, update to whatever latest version stock is on, then re trying the above process, let us know your results...

Mohammad Siddique said:
That's why I'll recommend you to go on stock, update to whatever latest version stock is on, then re trying the above process, let us know your results...
Click to expand...
Click to collapse
Unfortunately, I can't go on stock. The device is a device that was recalled for the battery issue (but this one's batter never even blinks towards a thermometer when even operating at full speed). So when I got the new device, I had to flash it with a non stock OS.
So I'm running one of the latest builds of Cyanogen before they went ballistic.
And if I go to stock, the machine will be bricked.

ggravier said:
Unfortunately, I can't go on stock. The device is a device that was recalled for the battery issue (but this one's batter never even blinks towards a thermometer when even operating at full speed). So when I got the new device, I had to flash it with a non stock OS.
So I'm running one of the latest builds of Cyanogen before they went ballistic.
And if I go to stock, the machine will be bricked.
Click to expand...
Click to collapse
From the zip you have download extract the blob file, reboot your tablet to bootloader/ fastboot
and run this command
Code:
fastboot flash staging blob
this will update your bootloader to the latest N bootloader by Nvidia and hence the error will also be gone.

[SOLVED] Bootloop when trying to downgrade from Android 8.1 (LineageOS 15.1) to 7.1.

I have the following installed:
[url]https://forum.xda-developers.com/oneplus-one/development/8-0-0r3-lineageos-15-0-t3670670[/URL]
Android: LineageOS 15.1 (8.1.0_r4) with latest magisk installed (15.3) with unofficial opengapps 8.1 mini package
When I try to downgrade to either Lineage 14.1 official or carbonrom 5.1 I am getting a boot loop at the oneplus logo. Restoring from backup to 8.1 resolves the issue.
1. factory reset
2. wipe system
3. Install Lineage 14.1 or carbonrom 5.1
4. Install recent opengapps mini package for 7.1.2
4. Reboot
The phone boot loops at the oneplus logo and I end up restoring from backup.
I have looked online and was struggling to find anything relevant. Some people report a new battery solved the issue but since It works when I restore from the backup It doesn't seem to be that. I do have a new battery on hand that I am eventually going to install though so I can do that.
Apologies if I am missing something obvious.

-Snowrider- said:
I have the following installed:
https://forum.xda-developers.com/oneplus-one/development/8-0-0r3-lineageos-15-0-t3670670
Android: LineageOS 15.1 (8.1.0_r4) with latest magisk installed (15.3) with unofficial opengapps 8.1 mini package
When I try to downgrade to either Lineage 14.1 official or carbonrom 5.1 I am getting a boot loop at the oneplus logo. Restoring from backup to 8.1 resolves the issue.
1. factory reset
2. wipe system
3. Install Lineage 14.1 or carbonrom 5.1
4. Install recent opengapps mini package for 7.1.2
4. Reboot
The phone boot loops at the oneplus logo and I end up restoring from backup.
I have looked online and was struggling to find anything relevant. Some people report a new battery solved the issue but since It works when I restore from the backup It doesn't seem to be that. I do have a new battery on hand that I am eventually going to install though so I can do that.
Apologies if I am missing something obvious.
Click to expand...
Click to collapse
Try the following :
-uninstall magisk using uninstaller(available in magisk forum)
-clear system,data,cache,dalvik
-install only the rom with out gapps
if it boots properly then you can install the gapps later or else if u find flashing gapps is causing the bootloop then use an older version and double check the compatibility.
if still not just try out another nougat rom

Thanks for the suggestion.
I tried your steps with the latest stable slimrom 7.1.2, lineage 14.1 and carbonrom 5.1 and I am still seeing the same issue. I was able to clean install the lineage 15.1 beta I linked to though in addition to restoring my backup as I have done before. I might try to clean install a different 8.1 (AOSP for example) and see if that one works. This will help narrow down if the issue is caused by 8.1 in general or specifically something that the lineage 15.1 beta has done.

I had a similar problem when I flashed Sultan's LOS14.1. I fixed it by flashing down to stock using wugfresh's bacon root toolkit. Keep in mind though that this will wipe EVERYTHING on your phone. Hope it doesn't come to that. Best of luck!

CedArctic said:
I had a similar problem when I flashed Sultan's LOS14.1. I fixed it by flashing down to stock using wugfresh's bacon root toolkit. Keep in mind though that this will wipe EVERYTHING on your phone. Hope it doesn't come to that. Best of luck!
Click to expand...
Click to collapse
This is what I ended up doing and it did the trick. Thank you for the suggestion.

LineageOS 17.1 BETA TESTING

Hi,
i'm trying to build Q for this Clark, anyone want to test?
If yes, pm me on Telegram (@DarkDroidDev)
EDIT: Join telegram group @clarkdev for beta testing or see development

Hi, i'm in!

DarkDroidDev said:
Hi,
i'm trying to build Q for this Clark, anyone want to test?
If yes, pm me on Telegram (@DarkDroidDev)
Click to expand...
Click to collapse
Link?

i 'm in too..

Link?

@DarkDroidDev already sent the DM from telegram

Выложите пожалуйста √17

Development resumed, who want to see progress or help with testing, feel free to join telegram group
@clarkdev

Any chance you could provide links without telegram?
Not looking to add another messenger that I'll forget I have in 6 months lol

Maybe you are also interested in my efforts to bring clark to 17.1
Kernel: https://github.com/chrmhoffmann/android_kernel_motorola_msm8992/tree/staging/lineage-17.1
Device: https://github.com/chrmhoffmann/android_device_motorola_clark/tree/staging/lineage-17.1
Vendor: https://github.com/chrmhoffmann/proprietary_vendor_motorola/tree/staging/lineage-17.1
Additional patches: https://gist.github.com/chrmhoffmann/dd232f142dcde4c590a659e85944f7a4
The above trees are not supposed to remain stable, I do force pushs until clean and uploadable to lineage (if ever).
Very early testbuild: https://www.androidfilehost.com/?fid=4349826312261826984
Credits go mainly to the lineage community and their commits on gerrit, and of course: hashbang, randomblame and highwaystar - esp for the camera headers .

I'd also be interested but don't use Telegram

ac2323 said:
I'd also be interested but don't use Telegram
Click to expand...
Click to collapse
has anyone tried chrmhoffmann's rom yet (post #10)? I'm interested to see if it boots and how stable it is. Also he's openly sharing his source code.

Nice.

Wheels564 said:
has anyone tried chrmhoffmann's rom yet (post #10)? I'm interested to see if it boots and how stable it is. Also he's openly sharing his source code.
Click to expand...
Click to collapse
Yes, working nice.

@DarkDroidDev Hey, how did you extract the proprietary blobs? The instruction says that one needs to have an installable zip of LineageOS for clark, or already have the device runnning the LOS. I tried to extract it just from my stock Moto X Style with the script and it did something, but I'm not sure if it's going to work.
Edit: I'm also interested in testing the 17.1 build, since the one I'm trying to build following the instruction is 14.1 and actually it fails because of lack of some vendor files :/ But I'm also not interested in joining Telegram
Edit: Oh, I missed the @chrmhoffmann post!

hi, chrmhoffmann. thank you for your work.
chrmhoffmann said:
Maybe you are also interested in my efforts to bring clark to 17.1
Kernel: https://github.com/chrmhoffmann/android_kernel_motorola_msm8992/tree/staging/lineage-17.1
Device: https://github.com/chrmhoffmann/android_device_motorola_clark/tree/staging/lineage-17.1
Vendor: https://github.com/chrmhoffmann/proprietary_vendor_motorola/tree/staging/lineage-17.1
Additional patches: https://gist.github.com/chrmhoffmann/dd232f142dcde4c590a659e85944f7a4
The above trees are not supposed to remain stable, I do force pushs until clean and uploadable to lineage (if ever).
Very early testbuild: https://www.androidfilehost.com/?fid=4349826312261826984
Credits go mainly to the lineage community and their commits on gerrit, and of course: hashbang, randomblame and highwaystar - esp for the camera headers .
Click to expand...
Click to collapse
Hi, chrmhoffmann. Thank you for your work. I previously tested your 20200718 upgrade. I have installed the same date recovery and the latest magisk20.4. Unfortunately the system will not start. I also tried wipe system wipe cache wipe data and reinstalled it again, but it still didn't work.

I cannot find any kind of forum for @DarkDroidDev . I also can't find a forum for @chrmhoffmann but I found the andoridfilehost link for him with his builds.
https://androidfilehost.com/?a=show&w=files&flid=313335
I did a lot of trial and error and I notice that he is posting his own Lineage recovery which through Googling I find is apparently most use for updating a ROM. I am using the latest Clark TWRP 3.4.0-0 and once you install your first LOS17 you can no longer flash an updated build because TWRP seems to be unable to wipe an android 10 build.
@chrmhoffman has LOS Recovery builds that do allow you to update his LOS17 to a new build. His latest LOS recovery is named recovery.img from 8/19/20. LOS Recovery is not very functional and likewise does not even have the option to wipe. The only way I have been able to wipe these LOS builds is to flash back to stock Android 7 Moto ROM and start over fresh. I am using NPHS25.200-23 which is the last Moto ROM for Clark. I have found flashing back to stock is a good practice when moving to a new ROM and I am getting much better with practice so it is not so onerous.
So here's what I do to flash the initial working version of LOS 17 on my Clark. I have found you can use any of his builds. Thus you can start with his latest build 20200715.
Flash stock Android 7 using fastboot
Flash TWRP using fastboot
Flash 20200715 build and latest Android 10.0 Open Gapps with TWRP
This is pretty much the standard old way that we always do. Now if you want to update 20200715 with either a clean or a dirty flash when he drops a new build you cannot use TWRP to do this because you can't wipe. If you want to clean flash a new build you will have to start over with stock. If you want to update with a dirty flash then you will need LOS Recovery. Easiest way is to flash the LOS Recovery image with TWRP but you can also fastboot flash it.
Flash LOS Recovery
Update ROM from LOS Recovery.
I have been able to flash Magisk from Stock and it seems to work fine but I have not tried yet to see how LOS Recovery handles Magisk. I am looking for help from anyone with more experience than I have to explain this better and most importantly find out where discussion is happening. The ROM works beautifully and so far much better than @randomblame ROM. No boot problems, WiFi tether works great, camera is better. So far it is great. So give it a try.

kb8no said:
I cannot find any kind of forum for @DarkDroidDev . I also can't find a forum for @chrmhoffmann but I found the andoridfilehost link for him with his builds.
https://androidfilehost.com/?a=show&w=files&flid=313335
I did a lot of trial and error and I notice that he is posting his own Lineage recovery which through Googling I find is apparently most use for updating a ROM. I am using the latest Clark TWRP 3.4.0-0 and once you install your first LOS17 you can no longer flash an updated build because TWRP seems to be unable to wipe an android 10 build.
@chrmhoffman has LOS Recovery builds that do allow you to update his LOS17 to a new build. His latest LOS recovery is named recovery.img from 8/19/20. LOS Recovery is not very functional and likewise does not even have the option to wipe. The only way I have been able to wipe these LOS builds is to flash back to stock Android 7 Moto ROM and start over fresh. I am using NPHS25.200-23 which is the last Moto ROM for Clark. I have found flashing back to stock is a good practice when moving to a new ROM and I am getting much better with practice so it is not so onerous.
So here's what I do to flash the initial working version of LOS 17 on my Clark. I have found you can use any of his builds. Thus you can start with his latest build 20200715.
Flash stock Android 7 using fastboot
Flash TWRP using fastboot
Flash 20200715 build and latest Android 10.0 Open Gapps with TWRP
This is pretty much the standard old way that we always do. Now if you want to update 20200715 with either a clean or a dirty flash when he drops a new build you cannot use TWRP to do this because you can't wipe. If you want to clean flash a new build you will have to start over with stock. If you want to update with a dirty flash then you will need LOS Recovery. Easiest way is to flash the LOS Recovery image with TWRP but you can also fastboot flash it.
Flash LOS Recovery
Update ROM from LOS Recovery.
I have been able to flash Magisk from Stock and it seems to work fine but I have not tried yet to see how LOS Recovery handles Magisk. I am looking for help from anyone with more experience than I have to explain this better and most importantly find out where discussion is happening. The ROM works beautifully and so far much better than @randomblame ROM. No boot problems, WiFi tether works great, camera is better. So far it is great. So give it a try.
Click to expand...
Click to collapse
From what I've seed Darkdroiddev removed Clark from his Github so I assume he is no longer working on this phone and this thread is probably dead. Randomblame hasn't posted since February. chrmhoffmann's thread https://forum.xda-developers.com/mo...opment/unofficial-lineage-17-1-clark-t4123077 actually has a link to official Lineage gerrit which means we are well on our way to becoming official Lineage again. Meanwhile I'll keep posting LOS 14.1 for MMBL until we get there.

Bootloop after installing Lineage

Recently I decided to play around with my retired xiaomi 4c which I bought in 2016/2017.
Firstly, I unlocked my phone and installed TWRP recovery. (the version I installed is twrp-3.1.1-0-libra), the link I used is here: https://dl.twrp.me/libra, the reason why I did not install version 3.1.1-1 is that It won't load in recovery mode.
Secondly, I tried to install lineage 14.1, 15.1,16.1, 17.1 (none of them worked), It gave me this error
E3004 the packge is for device 4c,libra, this device is .
After searching on google, I deleted the first line (the assert statement) in META-INF\com\google\android\updater-script.
I guess it managed to be installed (no error pop out).
the log displayed while it is installing:
detected filesystem ext4 for /dev/block/bootdevice/by-name/system
packing system image unconditionally
However, when I click boot to system, it stuck on the mi logo.
I need some suggestions on how to make this work.
Thanks in advance!

Flash the latest available official miui (currently V10.1.1.0), via mi flash tools
Flash twrp or orangefox, via ADB. twrp official site has an old version, androidfilehost has a newer version TWRP-20190528-3.3.1.0-libra. orangefox official site has taken down libra files but sourceforge has OrangeFox -R10.0-1-Stable-libra.
Then try again

I experienced "this device is ." problem before.
From I read somewhere in XDA, sometimes a ROM may require certain recovery images to flash. So if the image is published with some recovery, you may want to try them together.
The last time I flashed my mi4c successfully, the LineageOS build and TWRP are both from this post: https://forum.xda-developers.com/t/rom-android-8-9-10-unofficial-lineageos-for-mi-4c-mi-4s.4008625/ .
Good luck

Gourcuff14 said:
Flash the latest available official miui (currently V10.1.1.0), via mi flash tools
Flash twrp or orangefox, via ADB. twrp official site has an old version, androidfilehost has a newer version TWRP-20190528-3.3.1.0-libra. orangefox official site has taken down libra files but sourceforge has OrangeFox -R10.0-1-Stable-libra.
Then try again
Click to expand...
Click to collapse
Thank you! I finally managed to install lineage 14.1, but not 15.1, 16.1 or 17.1, weird

momocraft said:
I experienced "this device is ." problem before.
From I read somewhere in XDA, sometimes a ROM may require certain recovery images to flash. So if the image is published with some recovery, you may want to try them together.
The last time I flashed my mi4c successfully, the LineageOS build and TWRP are both from this post: https://forum.xda-developers.com/t/rom-android-8-9-10-unofficial-lineageos-for-mi-4c-mi-4s.4008625/ .
Good luck
Click to expand...
Click to collapse
Thank you, I finally managed to install lineage 14.1, but not 15.1, 16.1 or 17.1, weird.
Haha but now I failed to bypass the ssl pinning through sslunpinning and frida ><, frida says Bad access due to invalid address
Any idea how to fix this?

Try the boot image included in this build package and post your findings in that thread for assistance.
[ROM][8.1/9/10/11][Unofficial][EOL] LineageOS for Mi-4c/Mi-4s
DESCRIPTION Unofficial LineageOS ROMs for Mi-4c (libra) and Mi-4s (aqua), with base-layer enhancements and performance optimizations. Version 15.1/16.0/17.1/18.1 are available for download. FEATURE The following items may not be available for...
forum.xda-developers.com

you need orangefox for mi4c

yanzifan021 said:
Thank you! I finally managed to install lineage 14.1, but not 15.1, 16.1 or 17.1, weird
Click to expand...
Click to collapse
Hi friend, could you share the download link 14.1, thanks

timsg said:
Hi friend, could you share the download link 14.1, thanks
Click to expand...
Click to collapse
Here there are some builds https://androidfilehost.com/?w=search&s=libra&type=files&page=19