Hi all, i have a problem whan i install lineage os, i don't have any system on my oneplus one and i want install lineage but when the installation has finished, my phone restart and freeze on logo one plus one android powered.
if you have a solution ;D
good night
LucasJahier said:
Hi all, i have a problem whan i install lineage os, i don't have any system on my oneplus one and i want install lineage but when the installation has finished, my phone restart and freeze on logo one plus one android powered.
if you have a solution ;D
good night
Click to expand...
Click to collapse
Which firmware were you on? Which recovery you used?
Did you tried previous lineage os nightly's?
I don't know what firmware i m and i have try with the latest nighly release. And i use the latest version of twrp
LucasJahier said:
I don't know what firmware i m and i have try with the latest nighly release. And i use the latest version of twrp
Click to expand...
Click to collapse
Go to setting > about phone and see Baseband version.
If you're coming from CM13.1 make sure to wipe everything except internal storage.
Download the ROM again if possible (the version you have downloaded may be corrupted) from the Lineage os official site and gapps(micro or pico).
Flash the ROM first and then gapps.
Reboot your device.
If you want the Root access download the Su add-on from the Lineage website also.
Hope it will work.
Let us know.
Thanks.
Re
Re,
Sorry... but i don't have any os in my oneplus one... he is empty exept zip the lastest version of official website and zip of gapps.
Thank you
Related
Hello everyone,
I'm currently on the latest 'stable' cyanogenmod custom rom (cm-12.1-20150901-SNAPSHOT-YOG4PAO236-bacon.zip)
Now I want to switch to the latest oxygen OS version.
I found on the official site the 1.0.0 Version as a zip file.
I wantes to flash it via twrp - but it fails every time.
Does anyone got a real noob friendly tutorial how to switch from cyanogenmod to oxygen os?
jolle-pe said:
Hello everyone,
I'm currently on the latest 'stable' cyanogenmod custom rom (cm-12.1-20150901-SNAPSHOT-YOG4PAO236-bacon.zip)
Now I want to switch to the latest oxygen OS version.
I found on the official site the 1.0.0 Version as a zip file.
I wantes to flash it via twrp - but it fails every time.
Does anyone got a real noob friendly tutorial how to switch from cyanogenmod to oxygen os?
Click to expand...
Click to collapse
Do a full wipe and just flash OxygenOS. There's no reason why it'll fail. I've been hoping around OxygenOS and other ROM for a number of months and I never had that issue. Use TWRP 2.8.6.0 to flash
OKay my fault. I missed to unzip the downloaded zip file.
Now I got it
WARNINGS:
This ROM is in the canary test and NOT STABLE.
You flash this rom on your own respondibility.
Someone have got stuck in a bootloop.
The default language is Chinese.
Flashing this ROM will convert your ZUK Z1 from COS 12.1 to ZUI, and the bootloader will be replaced and locked.
If you want to go back to COS, you can search for help in this forum.
NOW you can install the gapps, and they can run well.Download the newest version (ZUI 1.5.201).
What works:
ALL.
Because ZUI recovery's device code name is K9, TWRP recovery's device code name is ham, if you flash it by TWRP recovery, you must modify the script.
How to flash:
1. convert to ZUI:
How to flash ZUK Z1 ZUI version 0.9.084_ST_150729
2. Download this rom.
3. Rename the rom file to update.zip, and put it into /sdcard .
4. Boot into ZUI recovery and full wipe.
5. Flash this rom and reboot.
NOTICES:
I tested this rom, and it works well. I flash it by TWRP recovery (I modified the script).
For first boot, you may wait for 10+ minutes.
Download:
ZUI 1.6.225 official ota url
ZUI 1.6.225 Baidu Colud Disk(This is a Chinese website.)
hfutxqd said:
WARNINGS:
This ROM is in the canary test and NOT STABLE.
You flash this rom on your own respondibility.
The default language is Chinese.
Flashing this ROM will convert your ZUK Z1 from COS 12.1 to ZUI, and the bootloader will be replaced and locked.
If you want to go back to COS, you can search for help in this forum.
What works:
ALL.
Download:
click here to donwload
http://pan.baidu.com/s/1bgw8Vk
Click to expand...
Click to collapse
The link is not opening....it's just keep loading...
Ramshu97 said:
The link is not opening....it's just keep loading...
Click to expand...
Click to collapse
You need to click the circled button....
bartito said:
You need to click the circled button....
Click to expand...
Click to collapse
Thanks man I downloaded the ROM file...
Here, I mirrored it on AndroidFileHost. This should make things easier to reach.
Hi,
Tried flashing the ROM with latest Breadcrust TWRP version. I had an error saying that the ROM was made for the "K9" model, and that mine is Z1. I modified the script in the rom file and finally flashed it, but I get stuck in a bootloop. Any ideas?
Thanks.
woonaval said:
Hi,
Tried flashing the ROM with latest Breadcrust TWRP version. I had an error saying that the ROM was made for the "K9" model, and that mine is Z1. I modified the script in the rom file and finally flashed it, but I get stuck in a bootloop. Any ideas?
Thanks.
Click to expand...
Click to collapse
K9 is the ZUI's official device code of ZUK Z1.Try to convert to ZUI firstly,and rename the rom file to update.zip. Boot into the ZUI's recovery, wipe and flash.
Could someone do a comparision in camera quality between COS12.1 and ZUI 6.0 ?
so with this ZUI Android 6.0 version, can be root or not..?
Problem solved after trial and error.. :highfive:
but now I have issues using playstore about google play service... so can't use play store.. :crying:
kaizer hanz said:
so with this ZUI Android 6.0 version, can be root or not..?
Problem solved after trial and error.. :highfive:
but now I have issues using playstore about google play service... so can't use play store.. :crying:
Click to expand...
Click to collapse
Flash TWRP recovery firstly, then you can flash the gapps.
hfutxqd said:
Flash TWRP recovery firstly, then you can flash the gapps.
Click to expand...
Click to collapse
can you give me the gapps..? I have TWRP installed, Rooted but don't have a Working Gapps.. I mean.. I have tried all gapps.. but no one work for me..
kaizer hanz said:
can you give me the gapps..? I have TWRP installed, Rooted but don't have a Working Gapps.. I mean.. I have tried all gapps.. but no one work for me..
Click to expand...
Click to collapse
http://opengapps.org/
choose ARM, 6.0, and the size you need
woonaval said:
http://opengapps.org/
choose ARM, 6.0, and the size you need
Click to expand...
Click to collapse
using the smallest.. nano version.. until now almost 30 minutes stuck at ZUK boot logo (maybe bootloop) :crying:
maybe going back to ZUI 1.2.0.40
So is there anyone who boot correctly and is able to give us a report?
We clearly need a more detailed step by step for those of us having an international Zuk device. If I can try it (maybe tomorrow), I will post this detailed info.
I have unlocked the bootloader and installed TWRP as well but while i'm trying to install GAPPS got error code:25, Now it's Bootloop i'm going back to the old version.
kaizer hanz said:
can you give me the gapps..? I have TWRP installed, Rooted but don't have a Working Gapps.. I mean.. I have tried all gapps.. but no one work for me..
Click to expand...
Click to collapse
You can find the gapps here.
opengapps.org
Before flash the gapps, you must wipe the data.
thrpod said:
Could someone do a comparision in camera quality between COS12.1 and ZUI 6.0 ?
Click to expand...
Click to collapse
+1 for this.
hfutxqd said:
You can find the gapps here.
opengapps.org
Before flash the gapps, you must wipe the data.
Click to expand...
Click to collapse
it is work for you..? couse I have bootloop.. maybe I need wipe data before flash gapps..
can you give your screenshot playstore working in Marshmallow version of ZUI..
EDIT :
after wipe data, wipe dalvik cache, wipe cache with no Luck... stuck at ZUK logo (Bootloop):silly:
going back to ZUI 1.2.040.. until someone give tutorial step-by-step cleary... :highfive:
I'm unable to downgrade after this update.. Cyanogen recovery give signatures verification error in the middle of installation...
Yesterday XIAOMI Mi5 has get a new update.
About TWRP aborts the update, because firmware MIUI 8.8.30 is required as a minimum requirement.
However, I find these not to download - does anyone have a link?
Regards & Thanks
Same here, does anyone can provide the download link ? Thank you
same here and the last update that worked has some bugs.
Apps crashing, battery drains etc.
Was hoping the new update would have fixed these issues but alas
I cannot get TWRP to flash giving the same error about MIUI 8.8.30
cabs77 said:
Yesterday XIAOMI Mi5 has get a new update.
About TWRP aborts the update, because firmware MIUI 8.8.30 is required as a minimum requirement.
However, I find these not to download - does anyone have a link?
Regards & Thanks
Click to expand...
Click to collapse
beerchow said:
Same here, does anyone can provide the download link ? Thank you
Click to expand...
Click to collapse
Blaster3K said:
same here and the last update that worked has some bugs.
Apps crashing, battery drains etc.
Was hoping the new update would have fixed these issues but alas
I cannot get TWRP to flash giving the same error about MIUI 8.8.30
Click to expand...
Click to collapse
This is to all of you, you can't apply stock OTA updates on rooted devices or devices that have TWRP installed. Stock OTA updates require an unmodified system partition(meaning no root, no Xposed, no root mods of any kind).
OTA updates also require stock recovery, not TWRP.
You can all try flashing any stock firmware for your device then wait for the update notification then try the update process.
To those of you that have TWRP installed, this is a good example of why it is so important to create a nandroid backup of your stock ROM before you modify anything on the device. If you had that nandroid backup, you could restore the backup, then flash a copy of your stock recovery, then unroot the device, then wait for the update notification, then you'd be able to apply the current update. Then after applying the update, root the device again and flash TWRP again, then create a new nandroid backup of the updated stock ROM and delete the older backup from before the update.
Sent from my LGL84VL using Tapatalk
I am running Lineage OS 15.1 when it applies the nightly update I get this error.
So what you are saying is they updated to MIUI 10 which as what I can see updates to MIUI 8.8.30 which includes new code
that TWRP and Lineage cannot install over. Also there is this Xiaomi's anti rollback that is installed as well so I am guessing
either live with the last Lineage OS update or install stock MIUI and call it day.
Blaster3K said:
I am running Lineage OS 15.1 when it applies the nightly update I get this error.
So what you are saying is they updated to MIUI 10 which as what I can see updates to MIUI 8.8.30 which includes new code
that TWRP and Lineage cannot install over. Also there is this Xiaomi's anti rollback that is installed as well so I am guessing
either live with the last Lineage OS update or install stock MIUI and call it day.
Click to expand...
Click to collapse
Oh, you mean a nightly update of LOS?
Maybe the MIUI update contained a bootloader update and the new builds of LOS were built to work with the new bootloader?
Sent from my LGL84VL using Tapatalk
Interesting I encountered the same problem. Lineage Cannont update because 8.8.30 stock ROM Miui is required.
Simply download latest available miui firmware. Via TWRP install it and then immediately install latest LineageOS.
Here is the link to the new MIUI
http://en.miui.com/thread-3709942-1-1.html
Sent from my LGL84VL using Tapatalk
Here all firmware files, select gemini for Mi5 https://sourceforge.net/projects/xiaomi-firmware-updater/files/Developer/
Since it appears to be quite some trouble to obtain the last release of Lineage 15.1 for the A9 I share a copy of it
Flashable ZIP
484,78 MB
hiae
LINK (expires 01-12-2019)
(direct download from dropbox)
https://ea1.eu/LOS-hiae-20180625
ALTERNATIVE LINK
(Tresorit)
https://ea1.eu/LOS15-1_signed
Make sure you're on the last firmware and TWRP versions
Obtain GApps from www.opengapps.org (Android 8.1 arm64+)
Good luck and I salute our dead device
This is for hiaeuhl, right?
15.1 should be universal, u can use it on both versions
Is rom stable?
depends on what u mean by "stable" yeah it works and runs fine, but the main issue with Los 16 is u don't have any audio while call
Do I need to be on nougat firmware before I can flash this rom?
Sent from my 2PQ93 using XDA-Developers Legacy app
you should have the latest stock firmware + bootloader etc. installed before u flash it ( i think )
solved said:
you should have the latest stock firmware + bootloader etc. installed before u flash it ( i think )
Click to expand...
Click to collapse
True. Flash the latest stock firmware and boot all the way to setup. This way all partitions will be correctly mounted. Then flash TWRP followed by the ROM and GApps
Installation Package Error
I have an hiaeul phone, and i found an error in the update-script file. It attempts to mount a directory that does not exist. To correct, open the file and replace all occurrences of "/dev/block/platform/soc.0/7824900.sdhci/by-name/system" with "/dev/block/platform/7824900.sdhci/by-name/system".
NOTE: I am not sure if this holds true for other variations of HTC One A9, only edit if you get an error.
I found the problem
After installing Google framework service , have problems
All the links is dead, can you update the links
Cicada_3301 said:
All the links is dead, can you update the links
Click to expand...
Click to collapse
I would like to download because I flashed twrp and wiped data but did not backup and am on version 2
I don't know if it works but I found a download link for Lineage 15.1 "lineage-15.1-20190724-UNOFFICIAL-hiae.zip" https://androidfilehost.com/?fid=6006931924117923121
Hello
Strange think for me, maybe not for you
I switch from carbon 8 and came back to lineage 16.
I'm not able to achieved installation with latest lineage 16, lineage microG or lineage17. Flashing the new rom works well, but after lineage home screen, the phone reboot to recovery.
With an lineage16 old version from 03/2019,install is ok and phone boot well.
I've suspected an old twrp version, but I'm on 3.3.1.0.
Any idea ?
thank you
it's the same with an old twrp version 3.2.
Ok, solved. You shouldn't install twrp as an app before rebooting to new os version.